I am trying to control some LEDs wired to the parallel port on Windows XP. The easiest solution would be Inpout32.dll from Logix4u.net. I have found many source code samples in various languages (C++, Visual Basic, C#) but nothing using Java.
Do you know any tutorials about calling DLL functions from Java ? (what I have found so far on Google are not so advanced).
Environment: Java 1.6.0, Windows XP
The generic way to access native code from Java is JNI.
However, there are frameworks like JNA and/or JInvoke hiding all complexity of JNI and providing interface similar to VBasic and C#.
BTW, there are JNI library and samples for your specific DLL here
There is also JNIWrapper
Related
I wrote a Java application for my company which works great. Now I am asked to interface my application with an API of a piece of hardware.
The API is implemented in a Windows dynamic link library (DLL). The samples that come with the API were written in Visual C++ 6.0
and Visual Basic 5.0 (seems very old).
There is no Java API available. I am wondering if there is a way to use the DLLs with my Java application I wrote? Should I rewrite the application
in VB.NET or... (Would these APIs even work with VB.NET)?
This is the piece of hardware whose API I need to use:
http://www.sealevel.com/store/8004e-pci-express-16-reed-relay-output-16-isolated-input-digital-interface-3-13v.html
Any suggestions or ideas are appreciated.
Thank you
The API should work with VB .NET.
If the API is Open-Source you could try to add JNI support, so that you can use it in Java.
Otherwise you could try to write the Application in C++. The difference to Java is not that big.
1) Use JNI, try using some java-c++ bridge which will make your life easy - see this https://code.google.com/p/javacpp/
2) Yes you can call native api's in vb.net
Is it possible to compile Java code into a DLL to be used in a Windows Phone 7 application?
I know it's possible to compile Java code into a jar and run IKVM.NET to convert that to a .NET DLL, but can that (.NET) DLL be used in a Windows Phone 7 application?
Thanks!
There may be ways of doing it, but it would be painful - many of the ports of the standard library classes won't be viable within WP7. (Even a lot of existing .NET code won't work under WP7 without tweaking - it depends on what you're trying to do.)
You'd be much better off either finding an existing port of whatever you're trying to use, or porting the Java code yourself. You'll end up with much more idiomatic .NET code that way, too.
No, IKVM is not supported on Windows Phone, and won't be, because it marshals unmanaged code, and emits IL in unsupported ways.
As Jon suggests, rewriting your Java library in C#, while targeting it the phone platform, is a much better idea.
I'm trying to make a program like AutoHotKey, but with a graphical interface.
I'm using java.awt.Robot
Now I want to make the code for checking the state from a key (In AHK: getKeyState)
Of course somthing like a KeyListener without having focus.
I read already something with JNI and C++, but....
I can't find some information.
Can somebody help me??
There are lot of good JNI resources for starting out with JNI Programming like the Sun JNI Tutorial. Almost all Tutorials assume a good knowledge of C/C++ because the Java Native Interface (JNI) is the bridge between native C/C++ code, the Java Virtual Machine and everything running in there (meaning your Java Bytecode).
What you may want to do first is to find a key capturing library for your operating system of choice (you didn't mention anything specific here) in C++ and try that out as well as checking if there are already some Java bindings (libraries that use JNI and offer Java classes) to interact with. I didn't find any promising on a quick search unfortunately.
works perfect for windows 32/64 Bit. It's not necessary to integrate the dll files into the (eclipse)workspace / deployment process. Amazing Lib:
Hot stuff!
http://ksquared.de/blog/2011/07/java-global-system-hook/
Are there inexpensive or free gateways from .NET to Java? I'm looking at some data acquisition hardware which has drivers for C/C++ and .NET -- I really don't want to do any programming in .NET.
Update: I haven't done what I originally wanted to do, but I've done something similar, using JNA to encapsulate some functions from a DLL, in order to control a USB hardware device from Java. (the DLL comes from the device manufacturer) It works really nicely. Thanks!
You could also try to use JNA for accessing the native library. JNA provides Java programs easy access to native shared libraries (DLLs on Windows) without writing anything but Java code—no JNI or native code is required. If their API is fairly straight foward, this might be the path of least resistance.
See their getting started guide where they call some native code (printf and GetSystemTime).
Well, there's JNBridge and EZ JCom, just from a Google search.
You could also use IKVM which is a slightly different approach.
(Any reason for not wanting to learn .NET, out of interest? It's a nice platform, and C# is a lovely language...)
If they have C++ versions of the drivers then you could write a wrapper around it using JNI and then load that in Java. JNI can be a bit of a pain, but it would let you use the C++ version of their drivers and not have to deal with .Net at all if you don't want.
I am partial to the recommendation to jump in the deep end with C# since it is so similar to Java. I did this and used IKVM to compile my favorite Java libs. to .NET assemblies and you get [nearly] all the core java runtime classes to boot, so if you tire of trying to find just the right C# collection type, you can always go back to java.util. (No generic collections though. Not sure why.)
Depending on what platform you're on, you have several choices for free IDEs too. For windows you can get Visual Studio Express for free but I also use SharpDevelop. You can also get the Mono IDE on Linux (and a few flavours of Unix, I think ?).
The C# learning curve is shallow if you already know Java. I only blew off 1.5 limbs on landmines that came out of nowhere for reasons I still don't understand, but workarounds were easy to come by. The worst thing about it was the darn developer docs which are AWFUL on account of being so slow. I really miss the snappiness of JavaDoc. Not only are the online docs incredibly slow, the problem is compounded by someones's iffy decision to put class summaries, constructors and methods/properties all on seperate pages so it just takes forever. Someone said to get the docs installer and install docs locally for a slightly improved experience. Not a bad idea I suppose.
I am author of jni4net, open source interprocess bridge between JVM and CLR. It's build on top of JNI and PInvoke. No C/C++ code needed. I hope it will help you.
If you have a Java application, the JNI mentioned by the others will be the way to go. You write some wrapper classes, and that's it.
If writing the wrappes is a too big task (depending on the number of methods you have to wrap), have a look at SWIG . I think it generates wrappers automatically, but I never actually used it.
If you want to code in the Java language, but you don't care if your program will run on the JRE/JVM, then you might as well use Microsoft J#. Basically, it's writing Java-Code wich is compiled to .NET-Bytecode and can use the .NET classes of the driver as well as your existing Java classes. With J# you will run into problems if your existing Java-code is newer than Java 1.4, look at this question on how to solve them.
From that point on, you could later add code in J#, C# or any other .NET language. However, you won't get back to the JRE/JVM easily.
I'm wondering if a Java library can be called from a VB.net application.
(A Google search turns up lots of shady answers, but nothing definitive)
No, you can't. Unless you are willing to use some "J#" libraries (which is not nearly the same as Java) or IKVM which is a Java implementation that runs on top of .NET, but as their documentation says:
IKVM.OpenJDK.ClassLibrary.dll: compiled version of the Java class libraries derived from the OpenJDK class library with some parts filled in with code from GNU Classpath and IcedTea, plus some additional IKVM.NET specific code.
So it's not the real deal.
I am author of jni4net, open source intraprocess bridge between JVM and CLR. It's build on top of JNI and PInvoke. No C/C++ code needed. I hope it will help you.
You can call Java from .NET if you wrap it in some form to make it accessable and the easiest way is typically to use a Runtime bridge like
http://www.jnbridge.com/
Other way is to wrap your API with java webservices.
check this also http://www.devx.com/interop/Article/19945
Nothing out of the box.
Most java/.net interop that I know uses web services.
If you can create COM components with Java, you can use tlbimp to create an interop assembly for using in VB.Net.
If can create standard DLLs that can be used from C++ with Java, you can write P/Invoke declarations and call them from VB.Net.
If you can create a web service with Java, you can generate proxy class from the WSDL and call it from VB.Net.
In any case, chances are the Java component will live in a separate process. I doubt you can load both the Java VM and the CLR in the same process.
If you have the source code and compile it using the J# compiler, then the answer is yes. If you want to call any pre-Java 2 (aka 1.2) libraries, then these are included pretty much verbatim with J#. More recent stuff is going to be tricky though (i.e., it's not there).
An example where this is used commercially are the yFiles graph layout algorithms from yWorks. These were originally just a Java library, but for the past few years they've been offering a .NET version, which is just the Java version compiled with Visual J#.
It's not without problems, and there are some limitations that you can't get around, but it can be done. So... unfortunately this answer looks pretty shady as well.
You could use JNI to instantiate a virtual machine and then use Java Classes. It will be some fun, though, because you would need to use C++ as a bridge between VB.Net and Java.
This article in java world has a quick tutorial on how to use Java from C++ and viceversa.
http://www.javaworld.com/javaworld/javatips/jw-javatip17.html
If you have the source, Visual Studio will let you convert Java code into c#.