Develop Reference

java regular expression and replace all occurrences

I want to replace one string in a big string, but my regular expression is not proper I guess. So it's not working.
Main string is
Some sql part which is to be replaced
cond = emp.EMAIL_ID = 'xx#xx.com' AND
emp.PERMANENT_ADDR LIKE('%98n%')
AND hemp.EMPLOYEE_NAME = 'xxx' and is_active='Y'
String to find and replace is
Based on some condition sql part to be replaced
hemp.EMPLOYEE_NAME = 'xxx'
I have tried this with
Pattern and Matcher class is used and
Pattern pat1 = Pattern.compile("/^hemp.EMPLOYEE_NAME\\s=\\s\'\\w\'\\s[and|or]*/$", Pattern.CASE_INSENSITIVE);
Matcher mat = pat1.matcher(cond);
while (mat.find()) {
System.out.println("Match: " + mat.group());
cond = mat.replaceFirst("xx "+mat.group()+"x");
mat = pat1.matcher(cond);
}
It's not working, not entering the loop at all. Any help is appreciated.

Obviously not - your regexp pattern doesn't make any sense.
The opening /: In some languages, regexps aren't strings and start with an opening slash. Java is not one of those languages, and it has nothing to do with regexps itself. So, this looks for a literal slash in that SQL, which isn't there, thus, failure.
^ is regexpese for 'start of string'. Your string does not start with hemp.EMPLOYEE_NAME, so that also doesn't work. Get rid of both / and ^ here.
\\s is one whitespace character (there are many whitespace characters - this matches any one of them, exactly one though). Your string doesn't have any spaces. Your intent, surely, was \\s* which matches 0 to many of them, i.e.: \\s* is: "Whitespace is allowed here". \\s is: There must be exactly one whitespace character here. Make all the \\s in your regexp an \\s*.
\\w is exactly one 'word' character (which is more or less a letter or digit), you obviously wanted \\w*.
[and|or] this is regexpese for: "An a, or an n, or a d, or an o, or an r, or a pipe symbol". Clearly you were looking for (and|or) which is regexpese for: Either the sequence "and", or the sequence "or".
* - so you want 0 to many 'and' or 'or', which makes no sense.
closing slash: You don't want this.
closing $: You don't want this - it means 'end of string'. Your string didn't end here.
The code itself:
replaceFirst, itself, also does regexps. You don't want to double apply this stuff. That's not how you replace a found result.
This is what you wanted:
Matcher mat = pat1.matcher(cond);
mat.replaceFirst("replacement goes here");
where replacement can include references to groups in the match if you want to take parts of what you matched (i.e. don't use mat.group(), use those references).
More generally did you read any regexp tutorial, did any testing, or did any reading of the javadoc of Pattern and Matcher?
I've been developing for a few years. It's just personal experience, perhaps, but, reading is pretty fundamental.

Instead of the anchors ^ and $, you can use word boundaries \b to prevent a partial match.
If you want to match spaces on the same line, you can use \h to match horizontal whitespace char, as \s can also match a newline.
You can use replaceFirst on the string using $0 to get the full match, and an inline modifier (?i) for a case insensitive match.
Note that using [and|or] is a character class matching one of the listed chars and escape the dot to match it literally, or else . matches any char except a newline.
(?i)\bhemp\.EMPLOYEE_NAME\h*=\h*'\w+'\h+(?:and|or)\b
See a regex demo or a Java demo
For example
String regex = "\\bhemp\\.EMPLOYEE_NAME\\h*=\\h*'\\w+'\\h+(?:and|or)\\b";
String string = "cond = emp.EMAIL_ID = 'xx#xx.com' AND\n"
+ "emp.PERMANENT_ADDR LIKE('%98n%') \n"
+ "AND hemp.EMPLOYEE_NAME = 'xxx' and is_active='Y'";
System.out.println(string.replaceFirst(regex, "xx$0x"));
Output
cond = emp.EMAIL_ID = 'xx#xx.com' AND
emp.PERMANENT_ADDR LIKE('%98n%')
AND xxhemp.EMPLOYEE_NAME = 'xxx' andx is_active='Y'

Java: Regular Expression not matching?

I am trying to extract a special sequence out of a String using the following Regular Expression:
[(].*[)]
My Pattern should only match if the String contains () with text between them.
Somehow, i I create a new Pattern using Pattern#compile(myString) and then match the String using Matcher matcher = myPattern.matcher(); it doesn't find anything, even though I tried it on regexr.com and it worked there.
My Pattern is a static final Pattern object in another class (I directly used Pattern#compile(myString).
Example String to match:
save (xxx,yyy)

The likely problem here is your quantifier.
Since you're using greedy * with a combination of . for any character, your match will not delimit correctly as . will also match closing ).
Try using reluctant [(].*?[)].
See quantifiers in docs.
You can also escape parenthesis instead of using custom character classes, like so: \\( and \\), but that has nothing to do with your issue.
Also note (thanks esprittn)
The * quantifier will match 0+ characters, so if you want to restrict your matches to non-empty parenthesis, use .+? instead - that'll guarantee at least one character inside your parenthesis.

Hope the below code helps : its extracts the data between '(' & ')' including them .
String pattern = "\\(.*\\)";
String line = "save(xx,yy)";
Pattern TokenPattern = Pattern.compile(pattern);
Matcher m = TokenPattern.matcher(line);
while (m.find()) {
int start = m.start(0);
int end = m.end(0);
System.out.println(line.substring(start, end));
}
to remove the brackets change 'start' to 'start+1' and 'end' to 'end-1' to change the bounding indexes of the sub-string being taken.

Cannot match my regular expression

I am trying to match a string that looks like "WIFLYMODULE-xxxx" where the x can be any digit. For example, I want to be able to find the following...
WIFLYMODULE-3253
WIFLYMODULE-1585
WIFLYMODULE-1632
I am currently using
final Pattern q = Pattern.compile("[WIFLYMODULE]-[0-9]{3}");
but I am not picking up the string that I want. So my question is, why is my regular expression not working? Am i going about it in the wrong way?

You should use (..) instead of [...]. [..] is used for Character class
With a "character class", also called "character set", you can tell the regex engine to match only one out of several characters.
(WIFLYMODULE)-[0-9]{4}
Here is demo
Note: But in this case it's not needed at all. (...) is used for capturing group to access it by Matcher.group(index)
Important Note: Use \b as word boundary to match the correct word.
\\bWIFLYMODULE-[0-9]{4}\\b
Sample code:
String str = "WIFLYMODULE-3253 WIFLYMODULE-1585 WIFLYMODULE-1632";
Pattern p = Pattern.compile("\\bWIFLYMODULE-[0-9]{4}\\b");
Matcher m = p.matcher(str);
while (m.find()) {
System.out.println(m.group());
}
output:
WIFLYMODULE-3253
WIFLYMODULE-1585
WIFLYMODULE-1632

The regex should be:
"WIFLYMODULE-[0-9]{4}"
The square brackets means: one of the characters listed inside. Also you were matching three numbers instead of four. So your were matching strings like (where xxx is a number of three digits):
W-xxx, I-xxx, F-xxx, L-xxx, Y-xxx, M-xxx, O-xxx, D-xxx, U-xxx, L-xxx, E-xxx

You had it match on 3 digits instead of 4. And putting WIFLYMODULE inside [] makes it match on only one of those characters.
final Pattern q = Pattern.compile("WIFLYMODULE-[0-9]{4}");

[...] means that one character out of the ones in the bracket must match and not the string within it.
You, however, want to match WIFLYMODULE, thus, you have to use Pattern.compile("WIFLYMODULE-[0-9]{3}"); or Pattern.compile("(WIFLYMODULE)-[0-9]{3}");
{n} means that the character (or group) must match n-times. In your example you need 4 instead of 3: Pattern.compile("WIFLYMODULE-[0-9]{4}");

This way will work:
final Pattern q = Pattern.compile("WIFLYMODULE-[0-9]{4}");
The pattern breaks down to:
WIFLYMODULE- The literal string WIFLYMODULE-
[0-9]{4} Exactly four digits
What you had was:
[WIFLYMODULE] Any one of the characters in WIFLYMODULE
- The literal string -
[0-9]{3} Exactly three digits

Regular expression in java

I know it's a simple problem but i'm blocked on it : i want to retrieve all strings written in this form :
$F{ETIQX}
Where X is a number. i wrote this regular expression but i'm getting errors :
if (textField.getText().matches("$F{ETIQ\d}")){
System.out.println("matches!!");
}
Any help will be appreciated.

i want to retrieve all strings
Then you shouldn't be using .matches() in the first place. but a Matcher and .find(). .matches() is a misnomer. It will succeed only if the whole input matches the regex (in contradiction with the definiton of regex matching which can occur anywhere in the input).
Also, your regex should be:
"\\$F\\{ETIQ\\d\\}"
(you need to escape backslashes in a Java string)
$, { and } are regex metacharacters; the first is an anchor matching the end of input, the two latter are bounds for a repetition quantifier.
Your code should read:
private static final Pattern PATTERN = Pattern.compile("\\$F\\{ETIQ\\d\\}");
// ...
final Matcher m = PATTERN.matcher(textField.getText());
while (m.find())
// work with m.group()

\$F\{ETIQ\d\}
escape character which have meaning in regex.
$ means end of string
{ means start of a quantifier
} means end of a quantifier
for matching these you must escape them to match them literally.
here is a demo http://regex101.com/r/xT4mR6
In java \ has no meaning and will throuw an error , so we need to escape \ with \.

Matching Exact string with regexp

I have the following string:
CLASSIC STF
CLASSIC
am using regexp to match the strings.
Pattern p = Pattern.compile("^CLASSIC(\\s*)$", Pattern.CASE_INSENSITIVE);
CLASSIC STF is also being displayed.
am using m.find()
How is it possible that only CLASSIC is displayed not CLASSIC STF
Thanks for helping.

If you use Matcher.find() the expression CLASSIC(\s*) will match CLASSIC STF.
Matcher.matches() will return false, however, since it requires the expression to match the entire input.
To make Matcher.find() do the same, change the expression to ^CLASSIC(\s*)$, as said by reto.

By default ^ and $ match against the beginning and end of the entire input string respectively, ignoring any newlines. I would expect that your expression would not match on the string you mention. Indeed:
String pattern = "^CLASSIC(\\s*)$";
String input = "CLASSIC STF%nCLASSIC";
Pattern p = Pattern.compile(pattern, Pattern.CASE_INSENSITIVE);
Matcher m = p.matcher(String.format(input));
while (m.find()) {
System.out.println(m.group());
}
prints no results.
If you want ^ and $ to match the beginning and end of all lines in the string you should enable "multiline mode". Do so by replacing line 3 above with Pattern p = Pattern.compile(pattern, Pattern.CASE_INSENSITIVE + Pattern.MULTILINE);. When I do so I get one result, namely: "CLASSIC".
You also asked why "CLASSIC STF" is not matched. Let's break down your pattern to see why. The pattern says: match anything that...
starts at the beginning of a line ~ ^
begins with a C, followed by an L, A, S, S, I and C ~ CLASSIC
after which 0 or more whitespace characters follow ~ (\s*)
after which we see a line ending ~ $
After matching the space in "CLASSIC STF" (step 3) we are looking at a character "S". This doesn't match a line ending (step 4), so we cannot match the regex.
Note that the parentheses in your regex are not necessary. You can leave them out.
The Javadoc of the Pattern class is very elaborate. It could be helpful to read it.
EDIT:
If you want to check if a string/line contains the word "CLASSIC" using a regex, then I'd recommend to use the regex \bCLASSIC\b. If you want to see if a string starts with the word "CLASSIC", then I'd use ^CLASSIC\b.

I wonder if this would help:
practice = c("CLASSIC STF", "CLASSIC")
grep("^CLASSIC[[:space:]STF]?", practice)