I have the following string:
CLASSIC STF
CLASSIC
am using regexp to match the strings.
Pattern p = Pattern.compile("^CLASSIC(\\s*)$", Pattern.CASE_INSENSITIVE);
CLASSIC STF is also being displayed.
am using m.find()
How is it possible that only CLASSIC is displayed not CLASSIC STF
Thanks for helping.
If you use Matcher.find() the expression CLASSIC(\s*) will match CLASSIC STF.
Matcher.matches() will return false, however, since it requires the expression to match the entire input.
To make Matcher.find() do the same, change the expression to ^CLASSIC(\s*)$, as said by reto.
By default ^ and $ match against the beginning and end of the entire input string respectively, ignoring any newlines. I would expect that your expression would not match on the string you mention. Indeed:
String pattern = "^CLASSIC(\\s*)$";
String input = "CLASSIC STF%nCLASSIC";
Pattern p = Pattern.compile(pattern, Pattern.CASE_INSENSITIVE);
Matcher m = p.matcher(String.format(input));
while (m.find()) {
System.out.println(m.group());
}
prints no results.
If you want ^ and $ to match the beginning and end of all lines in the string you should enable "multiline mode". Do so by replacing line 3 above with Pattern p = Pattern.compile(pattern, Pattern.CASE_INSENSITIVE + Pattern.MULTILINE);. When I do so I get one result, namely: "CLASSIC".
You also asked why "CLASSIC STF" is not matched. Let's break down your pattern to see why. The pattern says: match anything that...
starts at the beginning of a line ~ ^
begins with a C, followed by an L, A, S, S, I and C ~ CLASSIC
after which 0 or more whitespace characters follow ~ (\s*)
after which we see a line ending ~ $
After matching the space in "CLASSIC STF" (step 3) we are looking at a character "S". This doesn't match a line ending (step 4), so we cannot match the regex.
Note that the parentheses in your regex are not necessary. You can leave them out.
The Javadoc of the Pattern class is very elaborate. It could be helpful to read it.
EDIT:
If you want to check if a string/line contains the word "CLASSIC" using a regex, then I'd recommend to use the regex \bCLASSIC\b. If you want to see if a string starts with the word "CLASSIC", then I'd use ^CLASSIC\b.
I wonder if this would help:
practice = c("CLASSIC STF", "CLASSIC")
grep("^CLASSIC[[:space:]STF]?", practice)
Related
I am trying to match a multi line text using java. When I use the Pattern class with the Pattern.MULTILINE modifier, I am able to match, but I am not able to do so with (?m).
The same pattern with (?m) and using String.matches does not seem to work.
I am sure I am missing something, but no idea what. Am not very good at regular expressions.
This is what I tried
String test = "User Comments: This is \t a\ta \n test \n\n message \n";
String pattern1 = "User Comments: (\\W)*(\\S)*";
Pattern p = Pattern.compile(pattern1, Pattern.MULTILINE);
System.out.println(p.matcher(test).find()); //true
String pattern2 = "(?m)User Comments: (\\W)*(\\S)*";
System.out.println(test.matches(pattern2)); //false - why?
First, you're using the modifiers under an incorrect assumption.
Pattern.MULTILINE or (?m) tells Java to accept the anchors ^ and $ to match at the start and end of each line (otherwise they only match at the start/end of the entire string).
Pattern.DOTALL or (?s) tells Java to allow the dot to match newline characters, too.
Second, in your case, the regex fails because you're using the matches() method which expects the regex to match the entire string - which of course doesn't work since there are some characters left after (\\W)*(\\S)* have matched.
So if you're simply looking for a string that starts with User Comments:, use the regex
^\s*User Comments:\s*(.*)
with the Pattern.DOTALL option:
Pattern regex = Pattern.compile("^\\s*User Comments:\\s+(.*)", Pattern.DOTALL);
Matcher regexMatcher = regex.matcher(subjectString);
if (regexMatcher.find()) {
ResultString = regexMatcher.group(1);
}
ResultString will then contain the text after User Comments:
This has nothing to do with the MULTILINE flag; what you're seeing is the difference between the find() and matches() methods. find() succeeds if a match can be found anywhere in the target string, while matches() expects the regex to match the entire string.
Pattern p = Pattern.compile("xyz");
Matcher m = p.matcher("123xyzabc");
System.out.println(m.find()); // true
System.out.println(m.matches()); // false
Matcher m = p.matcher("xyz");
System.out.println(m.matches()); // true
Furthermore, MULTILINE doesn't mean what you think it does. Many people seem to jump to the conclusion that you have to use that flag if your target string contains newlines--that is, if it contains multiple logical lines. I've seen several answers here on SO to that effect, but in fact, all that flag does is change the behavior of the anchors, ^ and $.
Normally ^ matches the very beginning of the target string, and $ matches the very end (or before a newline at the end, but we'll leave that aside for now). But if the string contains newlines, you can choose for ^ and $ to match at the start and end of any logical line, not just the start and end of the whole string, by setting the MULTILINE flag.
So forget about what MULTILINE means and just remember what it does: changes the behavior of the ^ and $ anchors. DOTALL mode was originally called "single-line" (and still is in some flavors, including Perl and .NET), and it has always caused similar confusion. We're fortunate that the Java devs went with the more descriptive name in that case, but there was no reasonable alternative for "multiline" mode.
In Perl, where all this madness started, they've admitted their mistake and gotten rid of both "multiline" and "single-line" modes in Perl 6 regexes. In another twenty years, maybe the rest of the world will have followed suit.
str.matches(regex) behaves like Pattern.matches(regex, str) which attempts to match the entire input sequence against the pattern and returns
true if, and only if, the entire input sequence matches this matcher's pattern
Whereas matcher.find() attempts to find the next subsequence of the input sequence that matches the pattern and returns
true if, and only if, a subsequence of the input sequence matches this matcher's pattern
Thus the problem is with the regex. Try the following.
String test = "User Comments: This is \t a\ta \ntest\n\n message \n";
String pattern1 = "User Comments: [\\s\\S]*^test$[\\s\\S]*";
Pattern p = Pattern.compile(pattern1, Pattern.MULTILINE);
System.out.println(p.matcher(test).find()); //true
String pattern2 = "(?m)User Comments: [\\s\\S]*^test$[\\s\\S]*";
System.out.println(test.matches(pattern2)); //true
Thus in short, the (\\W)*(\\S)* portion in your first regex matches an empty string as * means zero or more occurrences and the real matched string is User Comments: and not the whole string as you'd expect. The second one fails as it tries to match the whole string but it can't as \\W matches a non word character, ie [^a-zA-Z0-9_] and the first character is T, a word character.
The multiline flag tells regex to match the pattern to each line as opposed to the entire string for your purposes a wild card will suffice.
I am trying to match a multi line text using java. When I use the Pattern class with the Pattern.MULTILINE modifier, I am able to match, but I am not able to do so with (?m).
The same pattern with (?m) and using String.matches does not seem to work.
I am sure I am missing something, but no idea what. Am not very good at regular expressions.
This is what I tried
String test = "User Comments: This is \t a\ta \n test \n\n message \n";
String pattern1 = "User Comments: (\\W)*(\\S)*";
Pattern p = Pattern.compile(pattern1, Pattern.MULTILINE);
System.out.println(p.matcher(test).find()); //true
String pattern2 = "(?m)User Comments: (\\W)*(\\S)*";
System.out.println(test.matches(pattern2)); //false - why?
First, you're using the modifiers under an incorrect assumption.
Pattern.MULTILINE or (?m) tells Java to accept the anchors ^ and $ to match at the start and end of each line (otherwise they only match at the start/end of the entire string).
Pattern.DOTALL or (?s) tells Java to allow the dot to match newline characters, too.
Second, in your case, the regex fails because you're using the matches() method which expects the regex to match the entire string - which of course doesn't work since there are some characters left after (\\W)*(\\S)* have matched.
So if you're simply looking for a string that starts with User Comments:, use the regex
^\s*User Comments:\s*(.*)
with the Pattern.DOTALL option:
Pattern regex = Pattern.compile("^\\s*User Comments:\\s+(.*)", Pattern.DOTALL);
Matcher regexMatcher = regex.matcher(subjectString);
if (regexMatcher.find()) {
ResultString = regexMatcher.group(1);
}
ResultString will then contain the text after User Comments:
This has nothing to do with the MULTILINE flag; what you're seeing is the difference between the find() and matches() methods. find() succeeds if a match can be found anywhere in the target string, while matches() expects the regex to match the entire string.
Pattern p = Pattern.compile("xyz");
Matcher m = p.matcher("123xyzabc");
System.out.println(m.find()); // true
System.out.println(m.matches()); // false
Matcher m = p.matcher("xyz");
System.out.println(m.matches()); // true
Furthermore, MULTILINE doesn't mean what you think it does. Many people seem to jump to the conclusion that you have to use that flag if your target string contains newlines--that is, if it contains multiple logical lines. I've seen several answers here on SO to that effect, but in fact, all that flag does is change the behavior of the anchors, ^ and $.
Normally ^ matches the very beginning of the target string, and $ matches the very end (or before a newline at the end, but we'll leave that aside for now). But if the string contains newlines, you can choose for ^ and $ to match at the start and end of any logical line, not just the start and end of the whole string, by setting the MULTILINE flag.
So forget about what MULTILINE means and just remember what it does: changes the behavior of the ^ and $ anchors. DOTALL mode was originally called "single-line" (and still is in some flavors, including Perl and .NET), and it has always caused similar confusion. We're fortunate that the Java devs went with the more descriptive name in that case, but there was no reasonable alternative for "multiline" mode.
In Perl, where all this madness started, they've admitted their mistake and gotten rid of both "multiline" and "single-line" modes in Perl 6 regexes. In another twenty years, maybe the rest of the world will have followed suit.
str.matches(regex) behaves like Pattern.matches(regex, str) which attempts to match the entire input sequence against the pattern and returns
true if, and only if, the entire input sequence matches this matcher's pattern
Whereas matcher.find() attempts to find the next subsequence of the input sequence that matches the pattern and returns
true if, and only if, a subsequence of the input sequence matches this matcher's pattern
Thus the problem is with the regex. Try the following.
String test = "User Comments: This is \t a\ta \ntest\n\n message \n";
String pattern1 = "User Comments: [\\s\\S]*^test$[\\s\\S]*";
Pattern p = Pattern.compile(pattern1, Pattern.MULTILINE);
System.out.println(p.matcher(test).find()); //true
String pattern2 = "(?m)User Comments: [\\s\\S]*^test$[\\s\\S]*";
System.out.println(test.matches(pattern2)); //true
Thus in short, the (\\W)*(\\S)* portion in your first regex matches an empty string as * means zero or more occurrences and the real matched string is User Comments: and not the whole string as you'd expect. The second one fails as it tries to match the whole string but it can't as \\W matches a non word character, ie [^a-zA-Z0-9_] and the first character is T, a word character.
The multiline flag tells regex to match the pattern to each line as opposed to the entire string for your purposes a wild card will suffice.
I am trying to match a multi line text using java. When I use the Pattern class with the Pattern.MULTILINE modifier, I am able to match, but I am not able to do so with (?m).
The same pattern with (?m) and using String.matches does not seem to work.
I am sure I am missing something, but no idea what. Am not very good at regular expressions.
This is what I tried
String test = "User Comments: This is \t a\ta \n test \n\n message \n";
String pattern1 = "User Comments: (\\W)*(\\S)*";
Pattern p = Pattern.compile(pattern1, Pattern.MULTILINE);
System.out.println(p.matcher(test).find()); //true
String pattern2 = "(?m)User Comments: (\\W)*(\\S)*";
System.out.println(test.matches(pattern2)); //false - why?
First, you're using the modifiers under an incorrect assumption.
Pattern.MULTILINE or (?m) tells Java to accept the anchors ^ and $ to match at the start and end of each line (otherwise they only match at the start/end of the entire string).
Pattern.DOTALL or (?s) tells Java to allow the dot to match newline characters, too.
Second, in your case, the regex fails because you're using the matches() method which expects the regex to match the entire string - which of course doesn't work since there are some characters left after (\\W)*(\\S)* have matched.
So if you're simply looking for a string that starts with User Comments:, use the regex
^\s*User Comments:\s*(.*)
with the Pattern.DOTALL option:
Pattern regex = Pattern.compile("^\\s*User Comments:\\s+(.*)", Pattern.DOTALL);
Matcher regexMatcher = regex.matcher(subjectString);
if (regexMatcher.find()) {
ResultString = regexMatcher.group(1);
}
ResultString will then contain the text after User Comments:
This has nothing to do with the MULTILINE flag; what you're seeing is the difference between the find() and matches() methods. find() succeeds if a match can be found anywhere in the target string, while matches() expects the regex to match the entire string.
Pattern p = Pattern.compile("xyz");
Matcher m = p.matcher("123xyzabc");
System.out.println(m.find()); // true
System.out.println(m.matches()); // false
Matcher m = p.matcher("xyz");
System.out.println(m.matches()); // true
Furthermore, MULTILINE doesn't mean what you think it does. Many people seem to jump to the conclusion that you have to use that flag if your target string contains newlines--that is, if it contains multiple logical lines. I've seen several answers here on SO to that effect, but in fact, all that flag does is change the behavior of the anchors, ^ and $.
Normally ^ matches the very beginning of the target string, and $ matches the very end (or before a newline at the end, but we'll leave that aside for now). But if the string contains newlines, you can choose for ^ and $ to match at the start and end of any logical line, not just the start and end of the whole string, by setting the MULTILINE flag.
So forget about what MULTILINE means and just remember what it does: changes the behavior of the ^ and $ anchors. DOTALL mode was originally called "single-line" (and still is in some flavors, including Perl and .NET), and it has always caused similar confusion. We're fortunate that the Java devs went with the more descriptive name in that case, but there was no reasonable alternative for "multiline" mode.
In Perl, where all this madness started, they've admitted their mistake and gotten rid of both "multiline" and "single-line" modes in Perl 6 regexes. In another twenty years, maybe the rest of the world will have followed suit.
str.matches(regex) behaves like Pattern.matches(regex, str) which attempts to match the entire input sequence against the pattern and returns
true if, and only if, the entire input sequence matches this matcher's pattern
Whereas matcher.find() attempts to find the next subsequence of the input sequence that matches the pattern and returns
true if, and only if, a subsequence of the input sequence matches this matcher's pattern
Thus the problem is with the regex. Try the following.
String test = "User Comments: This is \t a\ta \ntest\n\n message \n";
String pattern1 = "User Comments: [\\s\\S]*^test$[\\s\\S]*";
Pattern p = Pattern.compile(pattern1, Pattern.MULTILINE);
System.out.println(p.matcher(test).find()); //true
String pattern2 = "(?m)User Comments: [\\s\\S]*^test$[\\s\\S]*";
System.out.println(test.matches(pattern2)); //true
Thus in short, the (\\W)*(\\S)* portion in your first regex matches an empty string as * means zero or more occurrences and the real matched string is User Comments: and not the whole string as you'd expect. The second one fails as it tries to match the whole string but it can't as \\W matches a non word character, ie [^a-zA-Z0-9_] and the first character is T, a word character.
The multiline flag tells regex to match the pattern to each line as opposed to the entire string for your purposes a wild card will suffice.
I am trying to match a multi line text using java. When I use the Pattern class with the Pattern.MULTILINE modifier, I am able to match, but I am not able to do so with (?m).
The same pattern with (?m) and using String.matches does not seem to work.
I am sure I am missing something, but no idea what. Am not very good at regular expressions.
This is what I tried
String test = "User Comments: This is \t a\ta \n test \n\n message \n";
String pattern1 = "User Comments: (\\W)*(\\S)*";
Pattern p = Pattern.compile(pattern1, Pattern.MULTILINE);
System.out.println(p.matcher(test).find()); //true
String pattern2 = "(?m)User Comments: (\\W)*(\\S)*";
System.out.println(test.matches(pattern2)); //false - why?
First, you're using the modifiers under an incorrect assumption.
Pattern.MULTILINE or (?m) tells Java to accept the anchors ^ and $ to match at the start and end of each line (otherwise they only match at the start/end of the entire string).
Pattern.DOTALL or (?s) tells Java to allow the dot to match newline characters, too.
Second, in your case, the regex fails because you're using the matches() method which expects the regex to match the entire string - which of course doesn't work since there are some characters left after (\\W)*(\\S)* have matched.
So if you're simply looking for a string that starts with User Comments:, use the regex
^\s*User Comments:\s*(.*)
with the Pattern.DOTALL option:
Pattern regex = Pattern.compile("^\\s*User Comments:\\s+(.*)", Pattern.DOTALL);
Matcher regexMatcher = regex.matcher(subjectString);
if (regexMatcher.find()) {
ResultString = regexMatcher.group(1);
}
ResultString will then contain the text after User Comments:
This has nothing to do with the MULTILINE flag; what you're seeing is the difference between the find() and matches() methods. find() succeeds if a match can be found anywhere in the target string, while matches() expects the regex to match the entire string.
Pattern p = Pattern.compile("xyz");
Matcher m = p.matcher("123xyzabc");
System.out.println(m.find()); // true
System.out.println(m.matches()); // false
Matcher m = p.matcher("xyz");
System.out.println(m.matches()); // true
Furthermore, MULTILINE doesn't mean what you think it does. Many people seem to jump to the conclusion that you have to use that flag if your target string contains newlines--that is, if it contains multiple logical lines. I've seen several answers here on SO to that effect, but in fact, all that flag does is change the behavior of the anchors, ^ and $.
Normally ^ matches the very beginning of the target string, and $ matches the very end (or before a newline at the end, but we'll leave that aside for now). But if the string contains newlines, you can choose for ^ and $ to match at the start and end of any logical line, not just the start and end of the whole string, by setting the MULTILINE flag.
So forget about what MULTILINE means and just remember what it does: changes the behavior of the ^ and $ anchors. DOTALL mode was originally called "single-line" (and still is in some flavors, including Perl and .NET), and it has always caused similar confusion. We're fortunate that the Java devs went with the more descriptive name in that case, but there was no reasonable alternative for "multiline" mode.
In Perl, where all this madness started, they've admitted their mistake and gotten rid of both "multiline" and "single-line" modes in Perl 6 regexes. In another twenty years, maybe the rest of the world will have followed suit.
str.matches(regex) behaves like Pattern.matches(regex, str) which attempts to match the entire input sequence against the pattern and returns
true if, and only if, the entire input sequence matches this matcher's pattern
Whereas matcher.find() attempts to find the next subsequence of the input sequence that matches the pattern and returns
true if, and only if, a subsequence of the input sequence matches this matcher's pattern
Thus the problem is with the regex. Try the following.
String test = "User Comments: This is \t a\ta \ntest\n\n message \n";
String pattern1 = "User Comments: [\\s\\S]*^test$[\\s\\S]*";
Pattern p = Pattern.compile(pattern1, Pattern.MULTILINE);
System.out.println(p.matcher(test).find()); //true
String pattern2 = "(?m)User Comments: [\\s\\S]*^test$[\\s\\S]*";
System.out.println(test.matches(pattern2)); //true
Thus in short, the (\\W)*(\\S)* portion in your first regex matches an empty string as * means zero or more occurrences and the real matched string is User Comments: and not the whole string as you'd expect. The second one fails as it tries to match the whole string but it can't as \\W matches a non word character, ie [^a-zA-Z0-9_] and the first character is T, a word character.
The multiline flag tells regex to match the pattern to each line as opposed to the entire string for your purposes a wild card will suffice.
I'm trying to write a regex pattern that will match any sentence that begins with multiple or one tab and/or whitespace.
For example, I want my regex pattern to be able to match " hello there I like regex!"
but so I'm scratching my head on how to match words after "hello". So far I have this:
String REGEX = "(?s)(\\p{Blank}+)([a-z][ ])*";
Pattern PATTERN = Pattern.compile(REGEX);
Matcher m = PATTERN.matcher(" asdsada adf adfah.");
if (m.matches()) {
System.out.println("hurray!");
}
Any help would be appreciated. Thanks.
String regex = "^\\s+[A-Za-z,;'\"\\s]+[.?!]$"
^ means "begins with"
\\s means white space
+ means 1 or more
[A-Za-z,;'"\\s] means any letter, ,, ;, ', ", or whitespace character
$ means "ends with"
An example regex to match sentences by the definition: "A sentence is a series of characters, starting with at lease one whitespace character, that ends in one of ., ! or ?" is as follows:
\s+[^.!?]*[.!?]
Note that newline characters will also be included in this match.
A sentence starts with a word boundary (hence \b) and ends with one or more terminators. Thus:
\b[^.!?]+[.!?]+
https://regex101.com/r/7DdyM1/1
This gives pretty accurate results. However, it will not handle fractional numbers. E.g. This sentence will be interpreted as two sentences:
The value of PI is 3.141...
If you looking to match all strings starting with a white space you can try using "^\s+*"
regular expression.
This tool could help you to test your regular expression efficiently.
http://www.rubular.com/
Based upon what you desire and asked for, the following will work.
String s = " hello there I like regex!";
Pattern p = Pattern.compile("^\\s+[a-zA-Z\\s]+[.?!]$");
Matcher m = p.matcher(s);
if (m.matches()) {
System.out.println("hurray!");
}
See working demo
String regex = "(?<=^|(\.|!|\?) |\n|\t|\r|\r\n) *\(?[A-Z][^.!?]*((\.|!|\?)(?! |\n|\r|\r\n)[^.!?]*)*(\.|!|\?)(?= |\n|\r|\r\n)"
This match any sentence following the definition 'a sentence start with a capital letter and end with a dot'.
The below regex pattern matches sentences in a paragraph.
Pattern pattern = Pattern.compile("\\b[\\w\\p{Space}“”’\\p{Punct}&&[^.?!]]+[.?!]");
Reference: https://devsought.com/regex-pattern-to-match-sentence