I am unable to Install ANT, but i get install GIT, so i make a Folder in C Drive and paste the ANT unzipped files.
I have following location of installations,
1) JAVA: <D:\jdk1.7\bin>
2) GIT : <C:\Program Files\Git\bin>
AND
3) i created a Folder in C Drive for ANT : <C:\ant\bin>
Using Command prompt ,
i can execute the the command git , successfully . But when i put command ant, gives the following error
Unable to locate tools.jar. Expected to find it in C:\Program Files\Java\jre7\lib\tools.jar
Buildfile: build.xml does not exist!
Build failed
My environment variable set to the following path,
ANT_HOME = <c:\ant\bin>
JAVA_HOME = <d:\jdk1.7\bin>
Path = <%PATH%;%ANT_HOME%\bin;>
That's all , Thanks.
According to the information you provided, PATH variable should look like following:
%JAVA_HOME% ; %ANT_HOME% ; <other entries>
It seems that you're using Windows, thus you should check both your user-scope and system-scope environment variables (Computer - Properties - Advanced System Settings - Environment Variables).
Currently your build is failing due to JRE-related entry in PATH variable. Please remove it and retry.
Easiest way to check that the issue is resolved is to execute this from your command line:
javac -version
Normally this will give output like following:
javac 1.7.0_40
Install java and add it to class path by either creating java_home or directly to path variable in windows. Do the same thing for ant too. ie) place the ant location[upto ant\bin] in path variable and open the command prompt type ant . you will get the output as build failed which expects build.xml. Same will be applicable for git and other utilities...
hope it helps
i got the solution, Just download the project given in the link below ,
http://www.java2s.com/Open-Source/Java_Free_Code/Image/Download_Volley_demo_Free_Java_Code.htm
And import using Eclipse, and RUN. That's all . no need to make git reference. ( if you getting error continuously )
volley.jar you can use in your custom projects also.
Related
I have installed jdk on my mac, ran /usr/libexec/java_home and found the path to java to be this: /Library/Java/JavaVirtualMachines/jdk-9.0.4.jdk/Contents/Home
I added this line to my ~/.bashrc file:
export PATH=$PATH:/Library/Java/JavaVirtualMachines/jdk-9.0.4.jdk/Contents/Home
I still get this error message:
java: command not found
Can anyone help? I have been trying Stack Overflow solutions for hours now.
Thanks!
While it is sufficient to add the "bin" folder to your PATH, doing so will leave you unable to run several desirable Java standard tools (like maven, ant, sbt, scala and groovy). Instead, first set a JAVA_HOME and then add that with "bin" to your PATH. Like,
export JAVA_HOME="/Library/Java/JavaVirtualMachines/jdk-9.0.4.jdk/Contents/Home"
export PATH="$PATH:$JAVA_HOME/bin"
You have set your PATH to the wrong variable. Java is inside a bin folder, which you have to append to your current path. The correct command would be:
export PATH=$PATH:/Library/Java/JavaVirtualMachines/jdk-9.0.4.jdk/Contents/Home/bin
I keep recieving the following error when attempting to add a platform to a cordova project.
ERROR: executing command 'ant', make sure you have ant installed and added to your path.
I have added my JAVA_HOME, ANT_HOME and ANDROID_HOME (both \tools and \platform-tools) environment variables and can confirm they are all installed correctly be executing 'java', 'ant -version' and 'android' commands in my console and getting responses.
Right now, I have the above mentioned environment variables as both User and System variables, but have also tried just having them configured as System variables.
Ant version: 1.9.2
java: jdk1.8.0_11
I'm quite stumped right now because everything seems to be configured/installed correctly. Is there a specific location I should install/un-zip these components?
You have to show full path to bin folder of ANT. see for the variable name path, edit it. add one of the following to the end of it's value.
Suppose your ant folder is in d drive like this D:\ant then your ANT_HOME value should be D:\ant. Then add this to your path variable
%ANT_HOME%\bin
OR add the full path like
D:\ant\bin
I am trying to run a .jar file that was created successfully in Netbeans and I am receiving the following error:
Error occurred during initialization of VM java.lang.Error:
Properties init: Could not determine current working directory. at
java.lang.System.initProperties(Native Method) at
java.lang.System.initializeSystemClass(System.java:1070)
The command that I type to run the .jar is
java -jar "/path to the dist forlder/EOPPrototype.jar"
My classpath is as follows:
CLASSPATH=/opt/netbeans-7.1.2/ide/modules/ext/mysql-connector-java-5.1.13- bin.jar:/h/USERS/local/pagola/NetBeansProjects/mylib/dist/mylib.jar:/h/USERS/local/pagola/NetBeansProjects/EOPPrototype/build/classes:.
What am i missing?
I saw the same error when I was trying to call java -version inside a directory, which I already had deleted from another terminal session. Of course in that case java could not determine the current working directory, simply because it didn't exist.
Solution: cd to another directory and run that command again, that works for me.
See explanation here: https://bugs.openjdk.java.net/browse/JDK-8186434
In Fedora 21, I tried calling the "java -version" after an uninstall and it gave the above error. Close all the terminals and open them again and try.
Should work.
I was getting the same error message, but I'm not sure if it was for the same reason as I don't use Netbeans. I use my terminal and compile with ant.
I cd'd to a directory to run a javafile.class file. The file I want to run is part of a bigger package. The directory structure of the package looked something like this: a/b/c/javafile.class. The a, b, and c directories are all part of a larger package.
To run my javafile.class, I cd'd into a and ran the file from there: java b/c/javafile. After I made some changes and recompiled with my ant script, the directory I was in had been deleted and remade by ant. So, when I ran javafile.class again, I got the error you're getting.
I fixed my problem by cding out of the directories that are deleted and remade by ant and then running my javafile.class again.
maybe you did not config java environment on your workstation correctly
the following configurations were what I did in my mac
vi ~/.bash_profile
and add those in it
JAVA_HOME=/Library/Java/JavaVirtualMachines/jdk1.8.0_40.jdk/Contents/Home
PATH=$JAVA_HOME/bin:$PATH:.
CLASSPATH=$JAVA_HOME/lib/tools.jar:$JAVA_HOME/lib/dt.jar:.
export JAVA_HOME
export PATH
export CLASSPATH
replace
JAVA_HOME=/Library/Java/JavaVirtualMachines/jdk1.8.0_40.jdk/Contents/Home
with your jdk version
and then run
source ~/.bash_profile
to use these config immediately
then you can check by
java -version
I got the same error -
Error occurred during initialization of VM
java.lang.Error: Properties init: Could not determine current working directory.
by just doing 'java -version' (you would think it wouldn't need to bring up a
virtual machine just to answer a simple question like 'what version are you?')
A higher up element (that between the slashes) of the directory path of the pwd
had spaces in it. When I made the current working directory one which from /
downward didn't have any spaces the 'java -version' command got a proper response.
I'm concluding they didn't account for directories with spaces when they
programmed it. But that was version 1.7. I've now loaded version 8 so hopefully
it has been corrected.
I got this error on Mac OS X and this is a genuine error since the directory has vanished. The directory I was when I am executing the commands is <PROJECT DIR>\target.
The problem was I opened two terminals in the other terminal I ran mvn clean install and the target directory from PROJECT DIR got deleted and recreated.
My old terminal from where I was executing Java commands is not in a valid directory.
The file descriptor is invalid since the directory got deleted by Maven.
When I moved back to the parent directory and the changed back to the target directory, the java command started working correctly as expected.
Under CentOS, rhel, SL or SLC? Not an issue under debian/ubuntu.
I found you need to logout of the shell you are using and log back in. The environment is not set up initially correctly for the current shell. After login I see that: java -version will work.
Also ensure that /etc/alternatives/java actually points to something reasonable like:
ls -lisa /etc/alternatives/java
72645 0 lrwxrwxrwx. 1 root root 46 May 27 11:29 /etc/alternatives/java -> /usr/lib/jvm/jre-1.7.0-openjdk.x86_64/bin/java
Just now, i got the same error. because i use java to setreuid/setregid to apache:apache, when i change back to root:root, i changed gid before uid, the real result is root:apache. everything going wrong, such as the error say "java.lang.Error: Properties init: Could not determine current working directory. "
you can check it.
I was having this error in my mac, when I start tomcat from my eclipse. After setting JAVA_HOME and restarting the eclipse, the error is fixed.
You have to install default-jdk first !
sudo apt install default-jdk
only version 11 does not set all the environment correctly
in place of : sudo apt install openjdk-11-jdk
You may get this error if you issue "java -version" or other java command from a read-only directory. For example using openjdk 8 on centos (as non-root user):
cd /usr/bin
java -version
Error occurred during initialization of VM
java.lang.Error: Properties init: Could not determine current working directory.
I have made a jar file which i tested in windows and it works fine. now i want to test it for red hat enterprise linux 5. but i dont know how to run jar files in rhel5.
i've tried java -jar My.jar but it says bash: java: command not found. i've set JAVA_HOME variable as export JAVA_HOME=/root/jdk1.6.0_21 but still not working.
can anybody tell me how to run jar file in rhel5?
You need to set PATH variable , something like
export PATH=$PATH:/usr/java/jdk1.5.0_07/bin
replace /usr/java/jdk1.5.0_07/bin with path to your jdk's bin directory.
The problem is your terminal tries to find java command from the PATH , but it couldn't find it.
Update:
You need to setup global config in /etc/profile OR /etc/bash.bashrc file for all users:
# vi /etc/profile
Next setup PATH / JAVA_PATH variables as follows:
export PATH=$PATH:/usr/java/jdk1.5.0_07/bin
export PATH=$PATH:/usr/java/jdk1.5.0_07/bin
Top tip but slightly off topic.
1) Install your JDK in /usr/local/jdkX.X.X_XX/
2) Create a symbolic link /usr/local/java -> your chosen JDK installation
When you install new versions of java or if you want to revert to an older version, just change the symbolic link.
I created one jar file in following location: '/usr/local/bin/niidle.jar'
But when I type command as follows:
jar tf /usr/local/bin/niidle.jar
then it shows the following error:
--The program 'jar' can be found in the following packages:
* java-gcj-compat-headless
* gcj-4.2
* sun-java5-jdk
* kaffe
* gcj-4.3
* cacao-oj6-jdk
* openjdk-6-jdk
* fastjar
* sun-java6-jdk
Try: apt-get install <selected package>
bash: jar: command not found
Do you have a solution for this?
Apparently the jar program is not found by the operating system. Have you installed any of the packages containing it, and set up your path correctly?
In order for the OS to find an executable, the path environment variable must include the directory where that program is located. Otherwise you need to specify its full path to access it.
Well, it can't find the jar program. Perhaps your JDK isn't on the path, or you haven't installed one? If you have installed one, try to find where it is, and look in there for the jar program.
Try runnning "java -jar /usr/local/bin/niidle.jar"
On Ubuntu 12.10 The program jar is in /usr/lib/jvm/jdk-[version]/bin
edit the file /etc/environment for add to the path. Close the session and open a new session.
You seems to be using either Debian or Ubuntu. And it is telling you that you did not install one of the packages containing the 'jar' executable. You will have to install one corresponding to the java package you use on your system. In order to know which java package you already have type this : dpkg -l | grep java
If you are like me and you already have everything installed, but you just get the same error when trying to type jar: it should be listed in your PATH.
Run echo $PATH.
If you're like me, it does not contain the entry like this /usr/lib/jvm/jdk1.8.0_66/bin.
Make sure it's not $JAVA_HOME/bin, all variables should be expanded!
If you don't have the entry, but have JAVA_HOME set, run export PATH=$PATH:$JAVA_HOME/bin
See if you got the jar command.
If it does, google about environment variables to set that effect forever.
Have a nice day.