i am writing a game using Libgdx and i need to detect when the user touches a sprite.
I tried to do so with this following code:
this code set the rect's position
for(int i = 0;i<circlesArray.length;i++)
{
rect[i] = new Rectangle(circles.getPosition(i).x,circles.getPosition(i).y,height/8,height/8);
}
and this code set the click as rectangle and checks if it overlaps the sprite
if(Gdx.input.isTouched())
{
click = new Rectangle(Gdx.input.getX(),Gdx.input.getY(),Gdx.input.getX(),Gdx.input.getY());
if(Intersector.overlaps(click,rect[1]));
{
System.out.println("clicked");
x[1] = 0;
}
}
From some reason that i cant understand the program detects a collision even when it is not happened, when i tap anywhere on the screen it says that i pressed the sprite.
What should i do to fix it?
This is your issue:
click = new Rectangle(Gdx.input.getX(), Gdx.input.getY(), Gdx.input.getX(), Gdx.input.getY());
Should be:
click = new Rectangle(Gdx.input.getX(), Gdx.input.getY(), 1, 1);
The last two parameters of a Rectangle are width and height. Here we give the rectangle a width and a height of 1 pixel but you can set it to whatever you like. You were setting those parameters as the inputs x and y which are different every time giving you varying results.
Edit:
To translate the input coordinates to your game world's coordinates based on the camera you have to do this:
Vector3 clickPos = new Vector3(Gdx.input.getX(), Gdx.input.getY(), 0);
camera.unproject(clickPos);
click = new Rectangle(clickPos.x, clickPos.y, 1, 1);
When you use camera.unproject(Vector) it translates your inputs coordinates to work based off of where your camera is positioned in the game world. So now we're using a vector clickPos.
The reason we use a Vector3 is because this is what is required by the unproject function. We supply this vector with the inputs x and y but give it a 0 for the third parameter z since this is a 2d world.
Related
I want to move blocks with different x-positions without changing their shape by reducing the x-position.
I have tried to run the following code, but it seems like the blocks move to a tow position way to fast (correct potion and other i can't see where).
downBlocks=new Arraylist<Rectangle>;
for (DownBlocks downBlocks:getBlocks()){
if(Gdx.input.isTouched()) {
Vector3 touchPos = new Vector3();
touchPos.set(Gdx.input.getX(), Gdx.input.getY(), 0);
camera.unproject(touchPos);
downBlocks.x = (int) touchPos.x - downBlocks.x;
}
}
To do a drag, you need to remember the point where the finger last touched the screen so you can get a finger delta. And as a side note, avoid putting code inside your loop iteration if it only needs to be called once. It's wasteful to unproject the screen's touch point over and over for every one of your DownBlocks.
static final Vector3 VEC = new Vector3(); // reusuable static member to avoid GC churn
private float lastX; //member variable for tracking finger movement
//In your game logic:
if (Gdx.input.isTouching()){
VEC.set(Gdx.input.getX(), Gdx.input.getY(), 0);
camera.unproject(VEC);
}
if (Gdx.input.justTouched())
lastX = VEC.x; //starting point of drag
else if (Gdx.input.isTouching()){ // dragging
float deltaX = VEC.x - lastX; // how much finger has moved this frame
lastX = VEC.x; // for next frame
// Since you're working with integer units, you can round position
int blockDelta = (int)Math.round(deltaX);
for (DownBlocks downBlock : getBlocks()){
downBlock.x += blockDelta;
}
}
I don't recommend using integer units for your coordinates, though. If you are doing pixel art, then I recommend using floats for storing coordinates, and rounding off the coordinates only when drawing. That will reduce jerky-looking movement. If you are not using pixel art, I would just use float coordinates all the way. Here's a good article to help understand units.
I am trying to render some entities in random positions on the screen. The spawning positions are okay however when I move the player entity (which the camera is focused on) and pass the middle of the screen (then the camera starts moving) the sprites of the other entities also move with me, which I do not want.
I tried giving them postions in the world and not in the screen using cam.unproject(position); which converts psotions relative to the screen into positions relative to the game world, but that did not work either.
They are rendered the same way all other sprites are rendered in libgdx
This is the code where I initialize the entities:
Texture zombie = new Texture("zombie.png");
float x, y;
for (int i = 0; i < enemy_amout; i++) {
x = rm.nextFloat() * (mapWidth * 8f- zombie.getWidth());
y = rm.nextFloat() * (mapHeight * 8f - zombie.getHeight());
Vector3 position = new Vector3(x, y, 0);
cam.unproject(position);
enemies[i] = new Entity(zombie, position.x, position.y, 1);
}
This is what the game looks like when I start it
And this is what it looks like after I moved the player character to the right. As you can see they moved alongside the camera but I want them to remain on their original positions.
i try to rotate a 3D instance when I move the mouse. i use Orthographic Camera, and i have a tiled isomap in background.
[EDIT] I use this code :
public boolean mouseMoved (int x, int y) {
Vector3 direction = new Vector3();
Vector3 worldCoordinate = cam.unproject(new Vector3(x, y, 0));
direction = (worldCoordinate).sub(position).nor();
direction.set(-direction.x, -direction.y, -direction.z);
Matrix4 instanceRotation = instance.transform.cpy().mul(instance.transform);
instanceRotation.setToLookAt(direction, new Vector3(0,-1,0));
instanceRotation.rotate(0, 0, 1, 180);
quat = new Quaternion();
instanceRotation.getRotation(quat);
instance.transform.set(position, quat);
return false;
}
Now, the instance follows the cursor, but in all axes. I just want to turn on the Y axis. I can change quat.x = 0 and quat.z = 0 to lock the rotation. After that, the rotation only works on the Y axis. But, the model should turn over if my cursor is at the top of the screen, but it remains facing, no matter where my cursor is.
I don't know how to convert the coordinates to tell my rotation that it needs to turn over. And to modify the quat in this way is not very elegant
Edit : Some image for illustrate what i want
Here, with cursor in the bottom of the screen, the model turn to look in good direction :
Here, the model dont turn over, like the cursor is in bottom of the screen :
I am working with Jframes and jpanels to create a simulator.
I have used this code snippet for the calculation of dot position on the application window:
Screen screen = controller.locatedScreens().get(0);
int handsCount = frame.hands().count();
if(handsCount == 1)
{
Hand hand = frame.hands().get(0);
int fingerCount = hand.fingers().count();
Point2D.Float normPt = calcScreenNorm(hand, screen);
if (fingerCount == 1) // one finger == move point
doodle.movePoint(normPt);
}
}
private Point2D.Float calcScreenNorm(Hand hand, Screen screen)
/* The dot position is calculated using the screen position that the
user's hand is pointing at, which is then normalized to an (x,y)
value between -1 and 1, where (0,0) is the center of the screen.
*/
{
Vector palm = hand.palmPosition();
Vector direction = hand.direction();
Vector intersect = screen.intersect(palm, direction, true);
// intersection is in screen coordinates
// test for NaN (not-a-number) result of intersection
if (Float.isNaN(intersect.getX()) || Float.isNaN(intersect.getY()))
return null;
float xNorm = (Math.min(1, Math.max(0, intersect.getX())) - 0.5f)*2; // constrain to -1 -- 1
float yNorm = (Math.min(1, Math.max(0, (1-intersect.getY()))) - 0.5f)*2;
return new Point2D.Float(xNorm, yNorm);
} // end of calcScreenNorm()
I have got the point (orange dot) on the application window and i have created a jbutton (black) on the panel too.
Now when i move my finger (and so the point moves on the window), the point is coming beneath the button. Thus, i am not able to apply my screen tap gesture on the button.
Please help me out in this regard.
Thanks!
I've got a camera set up, and I can move with WASD and rotate the view with the mouse. But now comes the problem: I want to add physics to the camera/player, so that it "interacts" with my other jBullet objects. How do I do that? I thought about creating a RigidBody for the camera and storing the position there, so that jBullet can apply its physics to the camera. Then, when I need to change something (the position), I could simply change it in the RigidBody. But I didn't find any methods for editing the position.
Can you push me in the right direction or maybe give me an example source code?
I was asking the same question myself a few days ago. My solution was as Sierox said. To create a RigidBody of BoxShape and add that to the DynaicsWorld. To move the camera arund, apply force to its rigidbody. I have damping set to .999 for linear and 1 for angular to stop the camera when no force is applied, i.e. the player stops pressing the button.
I also use body.setAngularFactor(0); so the box isn't tumbling all over the place. Also set the mass really low as not to interfere too much with other objects, but still be able to jump on then and run into them, and otherwise be affected by them.
Remember to convert your x,y, and z coordinates to cartesian a plane so you move in the direction of the camera. i.e.
protected void setCartesian(){//set xyz to a standard plane
yrotrad = (float) (yrot / 180 * Math.PI);
xrotrad = (float) (xrot / 180 * Math.PI);
float pd = (float) (Math.PI/180);
x = (float) (-Math.cos(xrot*pd)*Math.sin(yrot*pd));
z = (float) (-Math.cos(xrot*pd)*Math.cos(yrot*pd));
//y = (float) Math.sin(xrot*pd);
}//..
public void forward(){// move forward from position in direction of camera
setCartesian();
x += (Math.sin(yrotrad))*spd;
z -= (Math.cos(yrotrad))*spd;
//y -= (Math.sin(xrotrad))*spd;
body.applyForce(new Vector3f(x,0,z),getThrow());
}//..
public Vector3f getThrow(){// get relative position of the camera
float nx=x,ny=y,nz=z;
float xrotrad, yrotrad;
yrotrad = (float) (yrot / 180 * Math.PI);
xrotrad = (float) (xrot / 180 * Math.PI);
nx += (Math.sin(yrotrad))*2;
nz -= (Math.cos(yrotrad))*2;
ny -= (Math.sin(xrotrad))*2;
return new Vector3f(nx,ny,nz);
}//..
to jump just use body.setLinearVelocity(new Vector3f(0,jumpHt,0)); and set jumpHt to whatever velocity you wish.
I use getThrow to return a vector for other objects i may be "throwing" on screen or carrying. I hope I answered your question and didn't throw in too much non-essential information.I'll try and find the source that gave me this idea. I believe it was on the Bullet forums.
------- EDIT ------
Sorry to have left that part out
once you have the rigid body functioning properly you just have to get it's coordinates and apply that to your camera for example:
float mat[] = new float[16];
Transform t = new Transform();
t = body.getWorldTransform(t);
t.origin.get(mat);
x = mat[0];
y = mat[1];
z = mat[2];
gl.glRotatef(xrot, 1, 0, 0); //rotate our camera on teh x-axis (left and right)
gl.glRotatef(yrot, 0, 1, 0); //rotate our camera on the y-axis (up and down)
gl.glTranslatef(-x, -y, -z); //translate the screen to the position of our camera
In my case I'm using OpenGL for graphics. xrot and yrot represent the pitch and yaw of your camera. the code above gets the world transform in the form of a matrix and for the purposes of the camera you need only to pull the x,y, and z coordinates then apply the transform.
from here, to move the camera, you can set the linear velocity of the rigid body to move the camera or apply force.
Before you read this answer I would like to mention that I have a problem with the solution stated in my answer. You can follow my question about that problem so that you can have the solution too if you use this answer.
So. First, you need to create a new BoxShape:
CollisionShape cameraHolder = new BoxShape(SIZE OF CAMERAHOLDER);
And add it to your world so that it interacts with all the other objects. Now you need to change all the methods about camera movement (not rotation) so that the methods move your cameraHolder but not your camera. Then set the position of your Camera to the position of the cameraHolder.
Again, if you have a problem where you can't move properly, you can check my question and wait for an answer. You also can find a better way of doing this.
If you have problems or did not understand something about the answer, please state it as a comment.