Develop Reference

Flatbuffer writing in binary file in android give only single response

I am new at flatbuffer. I had created a schema file from outside the project and adding the user(Monster as in Flatbuffer document) inside the binary via java code in android. everything works fine. but the time of reading binary file data it only gives me the user length 1. I had added 3 people but it's give me the length of monsters is 1 at the time of reading. can anyone help to figure this out. Here is the code->
this is the full code ->
enter code here
builder = new FlatBufferBuilder(1024);
public void addNewData(String emailOffset, String nameOffset,String
contactNoOffset, String DOJOffset, String departmentOffset,
String empIdOffset, float[] embeddingOffset)
{
int storeembedd = SingleJson.createEmbeddingVector(builder,
embeddingOffset);
int hereEmailOffset = builder.createString(emailOffset);
int hereNameOffset = builder.createString(nameOffset);
int hereContactOffset = builder.createString(contactNoOffset);
int hereDOJOffset = builder.createString(DOJOffset);
int hereDepartmentOffset=builder.createString(departmentOffset);
int hereImpIdOffset = builder.createString(empIdOffset);
int test = SingleJson.createSingleJson(builder, hereEmailOffset,
hereNameOffset, hereContactOffset
, hereDOJOffset, hereDepartmentOffset, hereImpIdOffset,
storeembedd);
int [] offsetOfMonster = new int[1];
offsetOfMonster[0] = test;
int temp = Monsters.createMonstersVector(builder,
offsetOfMonster);
Monsters.startMonsters(builder);
Monsters.addMonsters(builder, temp);
int orc = Monsters.endMonsters(builder);
builder.finish(orc);
byte[] buf1 = builder.sizedByteArray();
openAndAppenedInBinary(buf1);
}
private void openAndAppenedInBinary(byte[] buf1) {
FileOutputStream output = null;
try {
InputStream inputStream = new FileInputStream(newFile());
byte[] buffer = new byte[inputStream.available()];
if (inputStream.available() == 0) {
output = new FileOutputStream(newFile(), true);
output.write(buf1);
} else {
while (inputStream.read(buffer) != -1) {
output = new FileOutputStream(newFile(), true);
output.write(buffer);
output.write(buf1);
}
}
} catch (FileNotFoundException e) {
e.printStackTrace();
} catch (IOException e) {
e.printStackTrace();
} finally {
try {
output.close();
} catch (IOException e) {
e.printStackTrace();
}
}
}
private String newFile() {
File file = new File(Environment.getExternalStorageDirectory()
+ "/Android/data/"
+ context.getPackageName()
+ "/binFile");
if (!file.exists()) {
if (!file.mkdir()) {
if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.O) {
try {
Path dir = Paths.get(file.getAbsolutePath());
Files.createDirectory(dir);
} catch (IOException e) {
Path parentDir = Paths.get(file.getParent());
if (!Files.exists(parentDir)) {
try {
Files.createDirectories(parentDir);
} catch (IOException e1) {
e1.printStackTrace();
}
}
}
}
}
}
File binFile = new File(file, "renamed.bin");
try {
FileWriter writer = new FileWriter(binFile);
writer.close();
} catch (IOException e) {
e.printStackTrace();
}
return binFile.getAbsolutePath();
}
here is my reading code of flatbiffer->
new FlatParsingForPerticularId().execute(readRawResource(R.raw.renamed));//renamed is my bin file
private class FlatParsingForPerticularId extends AsyncTask {
#Override
protected String doInBackground(Object... params) {
byte[] buffer = (byte[]) params[0];
long startTime = System.currentTimeMillis();
ByteBuffer bb = ByteBuffer.wrap(buffer);
Monsters monsterList = Monsters.getRootAsMonsters(bb);
int length = monsterList.monstersLength();
SingleJson monster = null;
for (int i = 0; i < length; i++) {//here I m getting length 1 intead of 3
monster = monsterList.monsters(i);
if (i == outputval[0]) {
outputval[0] = (int) monster.EmpNo();
break;
}
}
long endTime = System.currentTimeMillis() - startTime;
String textToShow = "Elements: " + monsterList.monstersLength() + ": load time: " + endTime + "ms";
String[] monsterArr = monster.Name().split(" ");
return monsterArr[0];
}

FileInputStream leaving weird garbage text after skip() call

The need:
I want to write data into compressed and normal format as well. When I'll have to write data into compressed format "useCompression" will be sent as "true" and "useCompression" will be false when data needs to be stored in normal(as it is given to the Writer class) format.
The problem here is, how will I identify whether the data is compressed or not later when Reader class is trying to read the data?
So, to solve the problem, I am writing "1" into file if is "useCompression" is true and "0" if "useCompression" is false.
writing is fine, but when we try to skip the first element using "fIn.skip(1)" cause it is the identifier and not actual data, it is leaving behind some garbage value.
For, example, I am trying to write "2019-07-31" into a file and "useCompression" is false, so my file will hold "02019-07-31" and post "fIn.skip(1)" call it should hold "2019-07-31" but it is holding "^#2019-07-31".
Please help me figure out what I am doing wrong here
I've tried to update Reader class's constructor as:
public Reader(String key)
{
mKey = key;
try {
FileInputStream fIn = new FileInputStream(streamFileForKey(key));
byte[] firstByte = new byte[1];
int read = fIn.read(firstByte);
boolean shouldUseDecompression = (1 == firstByte[0]);
if (shouldUseDecompression) {
mFin = new GZIPInputStream(fIn);
}
else {
mFin = fIn;
}
}
catch (Exception e) {
System.out.println("Failed to open (r) key " + key + " exception : " + e);
}
}
But it does not solve the problem.
The actual code is:
import java.io.InputStream;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.OutputStream;
import java.io.DataOutputStream;
import java.util.zip.GZIPOutputStream;
import java.util.zip.GZIPInputStream;
public class forStackOverflow {
public static void main(String []args) {
// Write to normal file
mReader1 = new Reader(mInputFileName);
mWriter1 = new Writer(mOutputFilename1, false);
int availableBytes = mReader1.availableBytes();
int readBytes = 1000;
while (availableBytes > 0)
{
if (availableBytes >= 1000) {
availableBytes = availableBytes - readBytes;
}
else {
readBytes = availableBytes;
availableBytes = availableBytes - readBytes;
}
mWriter1.write(mReader1.read(readBytes), 0, readBytes);
}
mReader1.close();
mWriter1.close();
}
private static File streamFileForKey(String key)
{
return new File(key);
}
static String mInputFileName = "~/Downloads/inputStream.txt";
static String mOutputFilename1 = "~/Downloads/outputStream.txt";
static Reader mReader1;
static Writer mWriter1;
private static class Writer
{
public Writer(String key, boolean useCompression) {
mKey = key;
try {
FileOutputStream fileOutput = new FileOutputStream(streamFileForKey(key));
if (useCompression) {
fileOutput.write(1);
gOutputStream = new GZIPOutputStream(fileOutput);
}
else {
fileOutput.write(0);
gOutputStream = new DataOutputStream(fileOutput);
}
}
catch (Exception e) {
System.out.println("Got error while opening stream for " + mKey + ". Ex: " + e);
}
}
public boolean write(byte[] bytes, int pos, int len)
{
boolean retVal = true;
if (gOutputStream == null) {
return false;
}
try {
gOutputStream.write(bytes, pos, len);
retVal = true;
}
catch (Exception e) {
System.out.println("Failed to write " + len + " bytes to key " +
mKey + e);
retVal = false;
}
return retVal;
}
public void close()
{
if (gOutputStream != null) {
try {
gOutputStream.close();
}
catch (Exception e) {
System.out.println("Failed to close key " + mKey + e);
}
gOutputStream = null;
}
}
private String mKey;
private OutputStream gOutputStream;
}
private static class Reader
{
public Reader(String key)
{
mKey = key;
try {
FileInputStream fIn = new FileInputStream(streamFileForKey(key));
if (shouldUseDecompression()) {
long skipped = fIn.skip(1);
mFin = new GZIPInputStream(fIn);
}
else {
long skipped = fIn.skip(1);
mFin = fIn;
}
}
catch (Exception e) {
System.out.println("Failed to open (r) key " + key + " exception : " + e);
}
}
public byte[] read(int len)
{
if (mFin == null) {
return null;
}
byte[] b = null;
try {
b = new byte[len];
int read;
read = mFin.read(b, 0, len);
if (read <= 0) {
return null;
}
}
catch (Exception e) {
System.out.println("Failed to read " + len + " bytes from key " +
mKey + " exception : " + e);
}
return b;
}
public void close()
{
if (mFin != null) {
try {
mFin.close();
}
catch (Exception e) {
System.out.println("Failed to close key " + mKey + " exception : " + e);
}
mFin = null;
}
}
private boolean shouldUseDecompression()
{
boolean retVal = false;
try {
FileInputStream fIn = new FileInputStream(streamFileForKey(mKey));
byte[] firstByte = new byte[1];
int read = fIn.read(firstByte);
// If first byte is `1` the we need to use decompression on it.
retVal = (1 == firstByte[0]);
fIn.close();
}
catch(Exception e) {
System.out.println("Exception in shouldUseDecompression() : " + e);
retVal = false;
}
return retVal;
}
public int availableBytes()
{
int available = 0;
try {
if (mFin != null) {
available = mFin.available();
}
}
catch (IOException e) {
System.out.println("Failed to read available bytes for " + mKey + ". Exception : " + e);
}
return available;
}
private String mKey;
private InputStream mFin;
}
}
The expected result should be, post "fIn.skip(1)" call file should hold "2019-07-31" and not "^#2019-07-31".

After a lot of struggle, I found out that it was the expected result.
^# was nothing but the binary 0 I was writing from Writer class's constructor incase useCompression was false.
From line fileOutput.write(0);.

How to add data to the end of a CSV file (Java)

I am developing an Android application that produces results and I am saving this results in a CSV file. After that I want to close the app, open it again, get other results and write them at the end of the same existing CSV file. Right now every time it ovverrides the previous results.
This is my class to save the results in a CSV file:
public class SaveCSV {
private File file;
private RandomAccessFile randomAccessFile;
public SaveCSV(){
this.file = getPath("RisultatiTest.csv");
try {
this.randomAccessFile = new RandomAccessFile(file, "rwd");
} catch (FileNotFoundException e) {
e.printStackTrace();
}
}
public void salvaRisultati (int[] array) {
try {
file.createNewFile();
String s = "";
for (int i = 0; i < array.length; i++) {
s = s + array[i] + ",";
}
randomAccessFile.writeBytes(s);
randomAccessFile.writeBytes("\n");
} catch (IOException e) {
throw new RuntimeException("Unable to create File " + e);
}
}
public static File getPath(String fileName){
return new File(Environment.getExternalStorageDirectory(), fileName);
}
}

Program for file transfer in java using sockets

I have written a java code to transfer files from one server to another using the concept of socket programming. I got the codes from another java forum that meet my requirements. The program is said to transfer large sized files (like .mkv , .mprg movies) from one machine to another and can be used to transfer files of all formats. But after running the codes I found that the program is not able to transfer large sized files such as movies and even pdf of sizes 80mb or 111mb. The program has used bytebuffer but still error occurs. The codes are as follows (I got them from this site http://www.coderpanda.com/java-socket-programming-transferring-large-sized-files-through-socket/)
ClientMain.java
import java.io.IOException;
import java.net.Socket;
public class ClientMain
{
private DirectoryTxr transmitter = null;
Socket clientSocket = null;
private boolean connectedStatus = false;
private String ipAddress;
String srcPath = null;
String dstPath = "";
public ClientMain()
{
}
public void setIpAddress(String ip)
{
this.ipAddress = ip;
}
public void setSrcPath(String path)
{
this.srcPath = path;
}
public void setDstPath(String path)
{
this.dstPath = path;
}
private void createConnection()
{
Runnable connectRunnable = new Runnable()
{
public void run()
{
while (!connectedStatus)
{
try
{
clientSocket = new Socket(ipAddress, 22);
connectedStatus = true;
transmitter = new DirectoryTxr(clientSocket, srcPath, dstPath);
}
catch (IOException io)
{
io.printStackTrace();
}
}
}
};
Thread connectionThread = new Thread(connectRunnable);
connectionThread.start();
}
public static void main(String[] args)
{
ClientMain main = new ClientMain();
main.setIpAddress("localHost");
main.setSrcPath("C:/Transfer/");
main.setDstPath("C:/Receive");
main.createConnection();
}
}
DirectoryTxr.java
import java.io.*;
import java.net.Socket;
import java.net.SocketException;
import java.nio.ByteBuffer;
import java.nio.channels.FileChannel;
public class DirectoryTxr
{
Socket clientSocket = null;
String srcDir = null;
String dstDir = null;
byte[] readBuffer = new byte[1024];
private InputStream inStream = null;
private OutputStream outStream = null;
int state = 0;
final int permissionReqState = 1;
final int initialState = 0;
final int dirHeaderSendState = 2;
final int fileHeaderSendState = 3;
final int fileSendState = 4;
final int fileFinishedState = 5;
private boolean isLive = false;
private int numFiles = 0;
private int filePointer = 0;
String request = "May I send?";
String respServer = "Yes,You can";
String dirResponse = "Directory created...Please send files";
String fileHeaderRecvd = "File header received ...Send File";
String fileReceived = "File Received";
String dirFailedResponse = "Failed";
File[] opFileList = null;
public DirectoryTxr(Socket clientSocket, String srcDir, String dstDir)
{
try
{
this.clientSocket = clientSocket;
inStream = clientSocket.getInputStream();
outStream = clientSocket.getOutputStream();
isLive = true;
this.srcDir = srcDir;
this.dstDir = dstDir;
state = initialState;
readResponse();
sendMessage(request);
state = permissionReqState;
}
catch (IOException io)
{
io.printStackTrace();
}
}
private void sendMessage(String message)
{
try
{
sendBytes(request.getBytes("UTF-8"));
}
catch (UnsupportedEncodingException e)
{
e.printStackTrace();
}
}
private void readResponse()
{
Runnable readRunnable = new Runnable()
{
public void run()
{
while (isLive)
{
try
{
int num = inStream.read(readBuffer);
if (num > 0)
{
byte[] tempArray = new byte[num];
System.arraycopy(readBuffer, 0, tempArray, 0, num);
processBytes(tempArray);
}
}
catch (SocketException se)
{
System.exit(0);
}
catch (IOException io)
{
io.printStackTrace();
isLive = false;
}
}
}
};
Thread readThread = new Thread(readRunnable);
readThread.start();
}
private void sendDirectoryHeader()
{
File file = new File(srcDir);
if (file.isDirectory())
{
try
{
String[] childFiles = file.list();
numFiles = childFiles.length;
String dirHeader = "$" + dstDir + "#" + numFiles + "&";
sendBytes(dirHeader.getBytes("UTF-8"));
}
catch (UnsupportedEncodingException en)
{
en.printStackTrace();
}
}
else
{
System.out.println(srcDir + " is not a valid directory");
}
}
private void sendFile(String dirName)
{
File file = new File(dirName);
if (!file.isDirectory())
{
try
{
int len = (int) file.length();
int buffSize = len / 8;
RandomAccessFile raf = new RandomAccessFile(file, "rw");
FileChannel channel = raf.getChannel();
int numRead = 0;
while (numRead >= 0)
{
ByteBuffer buf = ByteBuffer.allocate(1024 * 100000);
numRead = channel.read(buf);
if (numRead > 0)
{
byte[] array = new byte[numRead];
System.arraycopy(buf.array(), 0, array, 0, numRead);
sendBytes(array);
}
}
System.out.println("Finished");
}
catch (IOException io)
{
io.printStackTrace();
}
}
}
private void sendHeader(String fileName)
{
try
{
File file = new File(fileName);
if (file.isDirectory())
return;
String header = "&" + fileName + "#" + file.length() + "*";
sendHeader(header);
sendBytes(header.getBytes("UTF-8"));
}
catch (UnsupportedEncodingException e)
{
e.printStackTrace();
}
}
private void sendBytes(byte[] dataBytes)
{
synchronized (clientSocket)
{
if (outStream != null)
{
try
{
outStream.write(dataBytes);
outStream.flush();
}
catch (IOException io)
{
io.printStackTrace();
}
}
}
}
private void processBytes(byte[] data)
{
try
{
String parsedMessage = new String(data, "UTF-8");
System.out.println(parsedMessage);
setResponse(parsedMessage);
}
catch (UnsupportedEncodingException u)
{
u.printStackTrace();
}
}
private void setResponse(String message)
{
if (message.trim().equalsIgnoreCase(respServer) && state == permissionReqState)
{
state = dirHeaderSendState;
sendDirectoryHeader();
}
else if (message.trim().equalsIgnoreCase(dirResponse) && state == dirHeaderSendState)
{
state = fileHeaderSendState;
if (LocateDirectory())
{
createAndSendHeader();
}
else
{
System.out.println("Vacant or invalid directory");
}
}
else if (message.trim().equalsIgnoreCase(fileHeaderRecvd) && state == fileHeaderSendState)
{
state = fileSendState;
sendFile(opFileList[filePointer].toString());
state = fileFinishedState;
filePointer++;
}
else if (message.trim().equalsIgnoreCase(fileReceived) && state == fileFinishedState)
{
if (filePointer < numFiles)
{
createAndSendHeader();
}
System.out.println("Successfully sent");
}
else if (message.trim().equalsIgnoreCase(dirFailedResponse))
{
System.out.println("Going to exit....Error ");
}
else if (message.trim().equalsIgnoreCase("Thanks"))
{
System.out.println("All files were copied");
}
}
private void closeSocket()
{
try
{
clientSocket.close();
}
catch (IOException e)
{
e.printStackTrace();
}
}
private boolean LocateDirectory()
{
boolean status = false;
File file = new File(srcDir);
if (file.isDirectory())
{
opFileList = file.listFiles();
numFiles = opFileList.length;
if (numFiles <= 0)
{
System.out.println("No files found");
}
else
{
status = true;
}
}
return status;
}
private void createAndSendHeader()
{
File opFile = opFileList[filePointer];
String header = "&" + opFile.getName() + "#" + opFile.length() + "*";
try
{
state = fileHeaderSendState;
sendBytes(header.getBytes("UTF-8"));
}
catch (UnsupportedEncodingException e)
{
}
}
private void sendListFiles()
{
createAndSendHeader();
}
}
ServerMain.java
public class ServerMain {
public ServerMain() {
}
public static void main(String[] args) {
DirectoryRcr dirRcr = new DirectoryRcr();
}
}
DirectoryRcr.java
import java.io.*;
import java.net.ServerSocket;
import java.net.Socket;
import java.net.SocketException;
public class DirectoryRcr
{
String request = "May I send?";
String respServer = "Yes,You can";
String dirResponse = "Directory created...Please send files";
String dirFailedResponse = "Failed";
String fileHeaderRecvd = "File header received ...Send File";
String fileReceived = "File Received";
Socket socket = null;
OutputStream ioStream = null;
InputStream inStream = null;
boolean isLive = false;
int state = 0;
final int initialState = 0;
final int dirHeaderWait = 1;
final int dirWaitState = 2;
final int fileHeaderWaitState = 3;
final int fileContentWaitState = 4;
final int fileReceiveState = 5;
final int fileReceivedState = 6;
final int finalState = 7;
byte[] readBuffer = new byte[1024 * 100000];
long fileSize = 0;
String dir = "";
FileOutputStream foStream = null;
int fileCount = 0;
File dstFile = null;
public DirectoryRcr()
{
acceptConnection();
}
private void acceptConnection()
{
try
{
ServerSocket server = new ServerSocket(22);
socket = server.accept();
isLive = true;
ioStream = socket.getOutputStream();
inStream = socket.getInputStream();
state = initialState;
startReadThread();
}
catch (IOException io)
{
io.printStackTrace();
}
}
private void startReadThread()
{
Thread readRunnable = new Thread()
{
public void run()
{
while (isLive)
{
try
{
int num = inStream.read(readBuffer);
if (num > 0)
{
byte[] tempArray = new byte[num];
System.arraycopy(readBuffer, 0, tempArray, 0, num);
processBytes(tempArray);
}
sleep(100);
} catch (SocketException s)
{
}
catch (IOException e)
{
e.printStackTrace();
}
catch (InterruptedException i)
{
i.printStackTrace();
}
}
}
};
Thread readThread = new Thread(readRunnable);
readThread.start();
}
private void processBytes(byte[] buff) throws InterruptedException
{
if (state == fileReceiveState || state == fileContentWaitState)
{
if (state == fileContentWaitState)
state = fileReceiveState;
fileSize = fileSize - buff.length;
writeToFile(buff);
if (fileSize == 0)
{
state = fileReceivedState;
try
{
foStream.close();
}
catch (IOException io)
{
io.printStackTrace();
}
System.out.println("Received " + dstFile.getName());
sendResponse(fileReceived);
fileCount--;
if (fileCount != 0)
{
state = fileHeaderWaitState;
}
else
{
System.out.println("Finished");
state = finalState;
sendResponse("Thanks");
Thread.sleep(2000);
System.exit(0);
}
System.out.println("Received");
}
}
else
{
parseToUTF(buff);
}
}
private void parseToUTF(byte[] data)
{
try
{
String parsedMessage = new String(data, "UTF-8");
System.out.println(parsedMessage);
setResponse(parsedMessage);
}
catch (UnsupportedEncodingException u) {
u.printStackTrace();
}
}
private void setResponse(String message)
{
if (message.trim().equalsIgnoreCase(request) && state == initialState)
{
sendResponse(respServer);
state = dirHeaderWait;
}
else if (state == dirHeaderWait)
{
if (createDirectory(message))
{
sendResponse(dirResponse);
state = fileHeaderWaitState;
}
else
{
sendResponse(dirFailedResponse);
System.out.println("Error occurred...Going to exit");
System.exit(0);
}
} else if (state == fileHeaderWaitState)
{
createFile(message);
state = fileContentWaitState;
sendResponse(fileHeaderRecvd);
}
else if (message.trim().equalsIgnoreCase(dirFailedResponse))
{
System.out.println("Error occurred ....");
System.exit(0);
}
}
private void sendResponse(String resp)
{
try
{
sendBytes(resp.getBytes("UTF-8"));
}
catch (UnsupportedEncodingException e)
{
e.printStackTrace();
}
}
private boolean createDirectory(String dirName)
{
boolean status = false;
dir = dirName.substring(dirName.indexOf("$") + 1, dirName.indexOf("#"));
fileCount = Integer.parseInt(dirName.substring(dirName.indexOf("#") + 1, dirName.indexOf("&")));
if (new File(dir).mkdir())
{
status = true;
System.out.println("Successfully created directory " + dirName);
}
else if (new File(dir).mkdirs())
{
status = true;
System.out.println("Directories were created " + dirName);
}
else if (new File(dir).exists())
{
status = true;
System.out.println("Directory exists" + dirName);
}
else
{
System.out.println("Could not create directory " + dirName);
status = false;
}
return status;
}
private void createFile(String fileName)
{
String file = fileName.substring(fileName.indexOf("&") + 1, fileName.indexOf("#"));
String lengthFile = fileName.substring(fileName.indexOf("#") + 1, fileName.indexOf("*"));
fileSize = Integer.parseInt(lengthFile);
dstFile = new File(dir + "/" + file);
try
{
foStream = new FileOutputStream(dstFile);
System.out.println("Starting to receive " + dstFile.getName());
}
catch (FileNotFoundException fn)
{
fn.printStackTrace();
}
}
private void writeToFile(byte[] buff)
{
try
{
foStream.write(buff);
}
catch (IOException io)
{
io.printStackTrace();
}
}
private void sendBytes(byte[] dataBytes)
{
synchronized (socket)
{
if (ioStream != null)
{
try
{
ioStream.write(dataBytes);
}
catch (IOException io)
{
io.printStackTrace();
}
}
}
}
}
Note that:-
ClientMain.java and DirectoryTxr.java are the two classes under client application.
ServerMain.java and DirectoryRcr.java are the two classes under Server application.
run the ClientMain.java and ServerMain.java simultaneously
Also specify the source directory, destination directory and host address of the machine in which server is running in the ClientMain.java(as per your computer). Here we are not specifying source file ,instead a source directory or folder is specifying.So the entire files of source directory will be transferred.
I would really appreciate if someone can help me with the problem.

You can check this code. This code can send files till 2GB of file size. Checked and working. Basically what I do here is first I send the file size and file name in an object then I start sending the file. First of all let me show you the class whose object will carry the File's details and send it to Receiver.
FileTransfer Class:
public class FileDetails implements Serializable {
String name;
long size;
public void setDetails(String name, long size) {
this.name = name;
this.size = size;
}
public String getName() {
return name;
}
public long getSize() {
return size;
}
}
Sender:
ServerSocket sendServer = null;
Socket sendSocket;
FileDetails details;
byte data[];
try {
File file = new File("File Url");
// Getting file name and size
if (file.length() > Integer.MAX_VALUE) {
System.out.println("File size exceeds 2 GB");
} else {
sendServer = new ServerSocket(5050);
System.out.println("Waiting for Client...");
sendSocket = sendServer.accept();
// File Object for accesing file Details
System.out.println("Connected to Client...");
data = new byte[2048]; // Here you can increase the size also which will send it faster
details = new FileDetails();
details.setDetails(file.getName(), file.length());
// Sending file details to the client
System.out.println("Sending file details...");
ObjectOutputStream sendDetails = new ObjectOutputStream(sendSocket.getOutputStream());
sendDetails.writeObject(details);
sendDetails.flush();
// Sending File Data
System.out.println("Sending file data...");
FileInputStream fileStream = new FileInputStream(file);
BufferedInputStream fileBuffer = new BufferedInputStream(fileStream);
OutputStream out = sendSocket.getOutputStream();
int count;
while ((count = fileBuffer.read(data)) > 0) {
System.out.println("Data Sent : " + count);
out.write(data, 0, count);
out.flush();
}
out.close();
fileBuffer.close();
fileStream.close();
}
} catch (Exception e) {
System.out.println("Error : " + e.toString());
}
Receiver's code :
int port = 5050;
try {
System.out.println("Connecting to Server...");
Socket receiveSocket = new Socket("IP of Server", port);
System.out.println("Connected to Server...");
// Getting file details
System.out.println("Getting details from Server...");
ObjectInputStream getDetails = new ObjectInputStream(receiveSocket.getInputStream());
FileDetails details = (FileDetails) getDetails.readObject();
System.out.println("Now receiving file...");
// Storing file name and sizes
String fileName = details.getName();
System.out.println("File Name : " + fileName);
byte data[] = new byte[2048]; // Here you can increase the size also which will receive it faster
FileOutputStream fileOut = new FileOutputStream("D:\\" + fileName);
InputStream fileIn = receiveSocket.getInputStream();
BufferedOutputStream fileBuffer = new BufferedOutputStream(fileOut);
int count;
int sum = 0;
while ((count = fileIn.read(data)) > 0) {
sum += count;
fileBuffer.write(data, 0, count);
System.out.println("Data received : " + sum);
fileBuffer.flush();
}
System.out.println("File Received...");
fileBuffer.close();
fileIn.close();
} catch (Exception e) {
System.out.println("Error : " + e.toString());
}
Hope this helps you.

You don't need all this. The canonical way to copy a stream in Java is as follows. It works for any buffer size greater than zero. I generally use 8192. There is certainly no necessity to read entire files into memory. It just wastes time and space.
while ((count = in.read(buffer)) > 0)
{
out.write(buffer, 0, count);
}
If you know the size in advance and need to keep the socket open for another transfer:
while (total < length && (count = in.read(buffer, 0, length-total > buffer.length ? buffer.length : (int)(length-total))) > 0)
{
out.write(buffer, 0, count);
total += count;
}
where total is a long initialized to zero before this loop, and length is the length you know in advance.

Extracting files in .iso using jSevenZip

I'm trying to extract the files in an .iso file I have. There are no errors and the console prints out all the files inside. However, none of the files get extracted. Any help is greatly appreciated!
I was able to find this link but I can't seem to integrate it in to my project.
Link to code example
class DownloadWorker extends SwingWorker<String, Object> {
private String flocation;
private JLabel out;
public DownloadWorker(String location, JLabel fout)
{
this.flocation = location;
this.out = fout;
}
#Override
public String doInBackground() {
//download here
out.setText("Beginning download. This may take a few minutes.");
try {
//ProgressBar/Install
System.out.println("FILELOCATION:\n----------");
System.out.println(flocation);
String URL_LOCATION = "http://www.futureretrogaming.tk/gamefiles/ProfessorPhys.iso";
String LOCAL_FILE = (flocation + "\\ProfessorPhys\\");
File localfile = new File(LOCAL_FILE);
if (localfile.exists()) {
System.out.println("Directory exists!");
}
else {
System.out.println("Directory doesn't exist! Creating...");
localfile.mkdir();
if (localfile.exists())
System.out.println("Directory created!");
}
System.out.println("LOCALFILE:\n-------");
System.out.println(LOCAL_FILE);
URL website = new URL(URL_LOCATION);
ReadableByteChannel rbc = Channels.newChannel(website.openStream());
FileOutputStream fos = new FileOutputStream(LOCAL_FILE+"\\ProfessorPhys.iso\\");
fos.getChannel().transferFrom(rbc, 0, Long.MAX_VALUE);
System.out.println("--------\nDone Downloading\n---------");
RandomAccessFile randomAccessFile = null;
ISevenZipInArchive inArchive = null;
try {
randomAccessFile = new RandomAccessFile(localfile +"\\ProfessorPhys.iso\\", "r");
inArchive = SevenZip.openInArchive(null, // autodetect archive type
new RandomAccessFileInStream(randomAccessFile));
// Getting simple interface of the archive inArchive
ISimpleInArchive simpleInArchive = inArchive.getSimpleInterface();
System.out.println(" Hash | Size | Filename");
System.out.println("----------+------------+---------");
for (ISimpleInArchiveItem item : simpleInArchive.getArchiveItems()) {
final int[] hash = new int[] { 0 };
if (!item.isFolder()) {
ExtractOperationResult result;
final long[] sizeArray = new long[1];
result = item.extractSlow(new ISequentialOutStream() {
public int write(byte[] data) throws SevenZipException {
hash[0] ^= Arrays.hashCode(data); // Consume data
sizeArray[0] += data.length;
return data.length; // Return amount of consumed data
}
});
if (result == ExtractOperationResult.OK) {
System.out.println(String.format("%9X | %10s | %s", //
hash[0], sizeArray[0], item.getPath()));
} else {
System.err.println("Error extracting item: " + result);
}
}
}
} catch (Exception e) {
System.err.println("Error occurs: " + e);
System.exit(1);
} finally {
if (inArchive != null) {
try {
inArchive.close();
} catch (SevenZipException e) {
System.err.println("Error closing archive: " + e);
}
}
if (randomAccessFile != null) {
try {
randomAccessFile.close();
} catch (IOException e) {
System.err.println("Error closing file: " + e);
}
}
}
} catch (Exception e) {
System.out.println(e);
}
return "done";
}
#Override
protected void done() {
//done
out.setText(out.getText() + "\n Operation Done");
}
}
Code I'm trying to implement:
public class ExtractorUtil {
private static Logger logger = Logger.getLogger(ExtractorUtil.class.getCanonicalName());
public static void extract(File file, String extractPath) throws Exception {
ISevenZipInArchive inArchive = null;
RandomAccessFile randomAccessFile = null;
randomAccessFile = new RandomAccessFile(file, "r");
inArchive = SevenZip.openInArchive(null, new RandomAccessFileInStream(randomAccessFile));
inArchive.extract(null, false, new MyExtractCallback(inArchive, extractPath));
if (inArchive != null) {
inArchive.close();
}
if (randomAccessFile != null) {
randomAccessFile.close();
}
}
public static class MyExtractCallback implements IArchiveExtractCallback {
private final ISevenZipInArchive inArchive;
private final String extractPath;
public MyExtractCallback(ISevenZipInArchive inArchive, String extractPath) {
this.inArchive = inArchive;
this.extractPath = extractPath;
}
#Override
public ISequentialOutStream getStream(final int index, ExtractAskMode extractAskMode) throws SevenZipException {
return new ISequentialOutStream() {
#Override
public int write(byte[] data) throws SevenZipException {
String filePath = inArchive.getStringProperty(index, PropID.PATH);
FileOutputStream fos = null;
try {
File dir = new File(extractPath);
File path = new File(extractPath + filePath);
if (!dir.exists()) {
dir.mkdirs();
}
if (!path.exists()) {
path.createNewFile();
}
fos = new FileOutputStream(path, true);
fos.write(data);
} catch (IOException e) {
logger.severe(e.getLocalizedMessage());
} finally {
try {
if (fos != null) {
fos.flush();
fos.close();
}
} catch (IOException e) {
logger.severe(e.getLocalizedMessage());
}
}
return data.length;
}
};
}