Develop Reference

What can be replaced by fileInputStream.available()?

When learning Java IO, I found that fileInputStream has an availabl() method, which can be equal to the file size when reading local files. So if you can directly know the size of the file, then in the case of the need to read the entire file, it is necessary to use BufferedInputStream to decorate it?
like this:
FileInputStream fileInputStream=new FileInputStream("F:\\test.txt");
byte[] data=new byte[fileInputStream.available()];
if (fileInputStream.read(data)!=-1) {
System.out.println(new String(data));
}
or
BufferedReader bufferedReader=new BufferedReader(new
FileReader("F:\\test.txt"));
StringBuilder stringBuilder=new StringBuilder();
for (String line;(line=bufferedReader.readLine())!=null;){
stringBuilder.append(line);
}
System.out.println(stringBuilder.toString());
or
BufferedInputStream bufferedInputStream=new BufferedInputStream(new FileInputStream("F:\\test.txt"));
byte[] data=new byte[bufferedInputStream.available()];
if (bufferedInputStream.read(data)!=-1) {
System.out.println(new String(data));
}
What are the pros and cons of these methods? Which one is better?
thx.

You are wrong about the meaning of available(). It returns the possible number of bytes you can read without blocking. From documentation:
Note that while some implementations of InputStream will return the total number of bytes in the stream, many will not. It is never correct to use the return value of this method to allocate a buffer intended to hold all data in this stream.
So, if you want convert stream to byte array you should use corresponding libraries, such as IOUtils:
byte[] out = IOUtils.toByteArray(stream);

Skipping bytes Java NIO SocketChannel

Let's assume I have SocketChannel is waiting for read.
I don't want to read the first K bytes (as in, I don't want to copy them to a byte buffer, just skip them).
Is there anyway of doing so? there is no skip() method available.

I'm not sure if this is what you want to achieve, or even if it works as you want to, but you can get a Socket and then an InputStream from it.
Since you want to skip bytes, seems that work with I/O streams is the best solution.
SocketChannel sock = SocketChannel.open();
sock.connect(new InetSocketAddress("your addres or something", 80));
InputStream ins = sock.socket().getInputStream();
//Skip here
ins.skip(5);
Edit
No, you cannot reuse what you have consumed with the input stream.
By the way, could you be more precise with "The allocation" problem? You can pipe the InputStream, so why do you say that you have to allocate a buffer? What is the target at the end?
Edit 2
There's an example that does not need to allocate K bytes
ins.skip(1);
ArrayList<Byte> bts = new ArrayList<>();
int last = 0;
while (last != -1) {
last = in.read();
bts.add((byte)last);
}
System.out.println(bts.stream().map(b -> new String(new byte[]{b.byteValue()})).collect(Collectors.joining()));

Using InputStream and InputStreamReader at the same time in java

I made an InputStream Object from a file and a InputStreamReader from that.
InputStream ips = new FileInputStream("c:\\data\\input.txt");
InputStreamReader isr = new InputStreamReader(ips);
I will basically read data in the form of bytes to a buffer but when there comes a time when i should read in chars I will 'switch mode' and read with InputStreamReader
byte[] bbuffer = new byte[20];
char[] cbuffer = new char[20];
while(ips.read(buffer, 0, 20)!=-1){
doSomethingWithbBuffer(bbuffer);
// check every 20th byte and if it is 0 start reading as char
if(bbuffer[20] == 0){
while(isr.read(cbuffer, 0, 20)!=-1){
doSomethingWithcBuffer(cbuffer);
// check every 20th char if its # return to reading as byte
if(cbuffer[20] == '#'){
break;
}
}
}
}
is this a safe way to read files that have mixed char and byte data?

no, this is not safe. the InputStreamReader may read "too much" data from the underlying stream (it uses internal buffers) and corrupt your attempt to read from the underlying byte stream. You can use something like DataInputStream if you want to mix reading characters and bytes.
Alternately, just read the data as bytes and use the correct character encoding to convert those bytes to characters/Strings.

Bring out inputstream from inputstream

i need to bring out inputstream from inputstream , for example inputstream A is 1024 byte and i need to bring out inputstream B from A of Hundred and fiftieth byte to end , from certain offset to certain end . i search in google and stackoverflow ...Is there any solution available in java ??

You can use the method "skip" to skip the first 150 bytes.
Here is an example:
byte[] buf = {1,2,3,4,5,6,7,8,9};
InputStream is1 = new ByteArrayInputStream(buf);
long skip = is1.skip(5);
System.out.println(is1.read());

If you know that you have a FileInputStream, you can use FileChannel.position() to set where in the file that stream will read from.
FileInputStream in = new FileInputStream("whatever");
FileChannel channel = in.getChannel();
channel.position(10);
This will not work with other types of streams.

Reading Strings and Binary from the same FileInputStream

I have a file that contains some amount of plain text at the start followed by binary content at the end. The size of the binary content is determined by some one of the plain text lines I read.
I was using a BufferedReader to read the individual lines, however it exposes no methods to refer to read a byte array. The readUTF for a DataInputStream doesnt read all the way to the end of the line, and the readLine method is deprecated.
Using the underlying FileInputStream to read returns empty byte arrays. Any suggestions on how to go about this?
private DOTDataInfo parseFile(InputStream stream) throws IOException{
DOTDataInfo info = new DOTDataInfo();
BufferedReader reader = new BufferedReader(new InputStreamReader(stream));
int binSize = 0;
String line;
while((line = reader.readLine()) != null){
if(line.length() == 0)
break;
DOTProperty prop = parseProperty(line);
info.getProperties().add(prop);
if(prop.getName().equals("ContentSize"))
binSize = Integer.parseInt(prop.getValue());
}
byte[] content = new byte[binSize];
stream.read(content); //Its all empty now. If I use a DataInputStream instead, its got the values from the file
return info;
}

You could use RandomAccessFile. Use readLine() to read the plain text at the start (note the limitations of this, as described in the API), and then readByte() or readFully() to read the subsequent binary data.
Using the underlying FileInputStream
to read returns empty byte arrays.
That's because you have wrapped the stream in a BufferedReader, which has probably consumed all the bytes from the stream when filling up its buffer.

If you genuinely have a file (rather than something harder to seek in, e.g. a network stream) then I suggest something like this:
Open the file as a FileInputStream
Wrap it in InputStreamReader and a BufferedReader
Read the text, so you can find out how much content there is
Close the BufferedReader (which will close the InputStreamReader which will close the FileInputStream)
Reopen the file
Skip to (total file length - binary content length)
Read the rest of the data as normal
You could just call mark() at the start of the FileInputStream and then reset() and skip() to get to the right place if you want to avoid reopening the file. (I was looking for an InputStream.seek() but I can't see one - I can't remember wanting it before in Java, but does it really not have one? Ick.)

You need to use an InputStream. Readers are for character data. Look into wrapping your input stream with a DataInputStream, like:
stream=new DataInputStream(new BufferedInputStream(new FileInputStream(...)));
The data input stream will give you many useful methods to read various types of data, and of course, the base InputStream methods for reading bytes.
(This is actually exactly what a HTTP server must do to read a request with content.)
The readUTF doesn't read a line, it reads a string that was written in (modified) UTF8 format - refer to the JavaDoc.

Alas, DataInputStream is deprecated and does not handle UTF. But this should help (it reads a line from a binary stream, without any lookahead).
public static String lineFrom(InputStream in) throws IOException {
byte[] buf = new byte[128];
int pos = 0;
for (;;) {
int ch = in.read();
if (ch == '\n' || ch < 0) break;
buf[pos++] = (byte) ch;
if (pos == buf.length) buf = Arrays.copyOf(buf, pos + 128);
}
return new String(Arrays.copyOf(buf, pos), "UTF-8");
}

The correct way is to use an InputStream of some form, probably a FileInputStream unless this becomes a performance barrier.
What do you mean "Using the underlying FileInputStream to read returns empty byte arrays."? This seems very unlikely and is probably where your mistake is. Can you show us the example code you've tried?

You can read the text with BufferedReader. When you know where the binary starts you can close the file and open it with RandomAccessFile and read binary from any point in the file.
Or you can read the file as binary and convert to text the sections you identify as text. {Using new String(bytes, encoding)}

I recommend using DataInputStream. You have the following options:
Read both text and binary content with DataInputStream
Open a BufferedReader, read text and close the stream. Then open a DataInputStream, skip bytes equal to the size of the text and read binary data.