Related
Why is it not possible to override static methods?
If possible, please use an example.
Overriding depends on having an instance of a class. The point of polymorphism is that you can subclass a class and the objects implementing those subclasses will have different behaviors for the same methods defined in the superclass (and overridden in the subclasses). A static method is not associated with any instance of a class so the concept is not applicable.
There were two considerations driving Java's design that impacted this. One was a concern with performance: there had been a lot of criticism of Smalltalk about it being too slow (garbage collection and polymorphic calls being part of that) and Java's creators were determined to avoid that. Another was the decision that the target audience for Java was C++ developers. Making static methods work the way they do had the benefit of familiarity for C++ programmers and was also very fast, because there's no need to wait until runtime to figure out which method to call.
Personally I think this is a flaw in the design of Java. Yes, yes, I understand that non-static methods are attached to an instance while static methods are attached to a class, etc etc. Still, consider the following code:
public class RegularEmployee {
private BigDecimal salary;
public void setSalary(BigDecimal salary) {
this.salary = salary;
}
public static BigDecimal getBonusMultiplier() {
return new BigDecimal(".02");
}
public BigDecimal calculateBonus() {
return salary.multiply(getBonusMultiplier());
}
/* ... presumably lots of other code ... */
}
public class SpecialEmployee extends RegularEmployee {
public static BigDecimal getBonusMultiplier() {
return new BigDecimal(".03");
}
}
This code will not work as you might expect. Namely, SpecialEmployee's get a 2% bonus just like regular employees. But if you remove the "static"s, then SpecialEmployee's get a 3% bonus.
(Admittedly, this example is poor coding style in that in real life you would likely want the bonus multiplier to be in a database somewhere rather than hard-coded. But that's just because I didn't want to bog down the example with a lot of code irrelevant to the point.)
It seems quite plausible to me that you might want to make getBonusMultiplier static. Perhaps you want to be able to display the bonus multiplier for all the categories of employees, without needing to have an instance of an employee in each category. What would be the point of searching for such example instances? What if we are creating a new category of employee and don't have any employees assigned to it yet? This is quite logically a static function.
But it doesn't work.
And yes, yes, I can think of any number of ways to rewrite the above code to make it work. My point is not that it creates an unsolvable problem, but that it creates a trap for the unwary programmer, because the language does not behave as I think a reasonable person would expect.
Perhaps if I tried to write a compiler for an OOP language, I would quickly see why implementing it so that static functions can be overriden would be difficult or impossible.
Or perhaps there is some good reason why Java behaves this way. Can anyone point out an advantage to this behavior, some category of problem that is made easier by this? I mean, don't just point me to the Java language spec and say "see, this is documented how it behaves". I know that. But is there a good reason why it SHOULD behave this way? (Besides the obvious "making it work right was too hard"...)
Update
#VicKirk: If you mean that this is "bad design" because it doesn't fit how Java handles statics, my reply is, "Well, duh, of course." As I said in my original post, it doesn't work. But if you mean that it is bad design in the sense that there would be something fundamentally wrong with a language where this worked, i.e. where statics could be overridden just like virtual functions, that this would somehow introduce an ambiguity or it would be impossible to implement efficiently or some such, I reply, "Why? What's wrong with the concept?"
I think the example I give is a very natural thing to want to do. I have a class that has a function that does not depend on any instance data, and which I might very reasonably want to call independent of an instance, as well as wanting to call from within an instance method. Why should this not work? I've run into this situation a fair number of times over the years. In practice I get around it by making the function virtual, and then creating a static method whose only purpose in life is to be a static method that passes the call on to the virtual method with a dummy instance. That seems like a very roundabout way to get there.
The short answer is: it is entirely possible, but Java doesn't do it.
Here is some code which illustrates the current state of affairs in Java:
File Base.java:
package sp.trial;
public class Base {
static void printValue() {
System.out.println(" Called static Base method.");
}
void nonStatPrintValue() {
System.out.println(" Called non-static Base method.");
}
void nonLocalIndirectStatMethod() {
System.out.println(" Non-static calls overridden(?) static:");
System.out.print(" ");
this.printValue();
}
}
File Child.java:
package sp.trial;
public class Child extends Base {
static void printValue() {
System.out.println(" Called static Child method.");
}
void nonStatPrintValue() {
System.out.println(" Called non-static Child method.");
}
void localIndirectStatMethod() {
System.out.println(" Non-static calls own static:");
System.out.print(" ");
printValue();
}
public static void main(String[] args) {
System.out.println("Object: static type Base; runtime type Child:");
Base base = new Child();
base.printValue();
base.nonStatPrintValue();
System.out.println("Object: static type Child; runtime type Child:");
Child child = new Child();
child.printValue();
child.nonStatPrintValue();
System.out.println("Class: Child static call:");
Child.printValue();
System.out.println("Class: Base static call:");
Base.printValue();
System.out.println("Object: static/runtime type Child -- call static from non-static method of Child:");
child.localIndirectStatMethod();
System.out.println("Object: static/runtime type Child -- call static from non-static method of Base:");
child.nonLocalIndirectStatMethod();
}
}
If you run this (I did it on a Mac, from Eclipse, using Java 1.6) you get:
Object: static type Base; runtime type Child.
Called static Base method.
Called non-static Child method.
Object: static type Child; runtime type Child.
Called static Child method.
Called non-static Child method.
Class: Child static call.
Called static Child method.
Class: Base static call.
Called static Base method.
Object: static/runtime type Child -- call static from non-static method of Child.
Non-static calls own static.
Called static Child method.
Object: static/runtime type Child -- call static from non-static method of Base.
Non-static calls overridden(?) static.
Called static Base method.
Here, the only cases which might be a surprise (and which the question is about) appear to be the first case:
"The run-time type is not used to determine which static methods are called, even when called with an object instance (obj.staticMethod())."
and the last case:
"When calling a static method from within an object method of a class, the static method chosen is the one accessible from the class itself and not from the class defining the run-time type of the object."
Calling with an object instance
The static call is resolved at compile-time, whereas a non-static method call is resolved at run-time. Notice that although static methods are inherited (from parent) they are not overridden (by child). This could be a surprise if you expected otherwise.
Calling from within an object method
Object method calls are resolved using the run-time type, but static (class) method calls are resolved using the compile-time (declared) type.
Changing the rules
To change these rules, so that the last call in the example called Child.printValue(), static calls would have to be provided with a type at run-time, rather than the compiler resolving the call at compile-time with the declared class of the object (or context). Static calls could then use the (dynamic) type hierarchy to resolve the call, just as object method calls do today.
This would easily be doable (if we changed Java :-O), and is not at all unreasonable, however, it has some interesting considerations.
The main consideration is that we need to decide which static method calls should do this.
At the moment, Java has this "quirk" in the language whereby obj.staticMethod() calls are replaced by ObjectClass.staticMethod() calls (normally with a warning). [Note: ObjectClass is the compile-time type of obj.] These would be good candidates for overriding in this way, taking the run-time type of obj.
If we did it would make method bodies harder to read: static calls in a parent class could potentially be dynamically "re-routed". To avoid this we would have to call the static method with a class name -- and this makes the calls more obviously resolved with the compile-time type hierarchy (as now).
The other ways of invoking a static method are more tricky: this.staticMethod() should mean the same as obj.staticMethod(), taking the run-time type of this. However, this might cause some headaches with existing programs, which call (apparently local) static methods without decoration (which is arguably equivalent to this.method()).
So what about unadorned calls staticMethod()? I suggest they do the same as today, and use the local class context to decide what to do. Otherwise great confusion would ensue. Of course it means that method() would mean this.method() if method was a non-static method, and ThisClass.method() if method were a static method. This is another source of confusion.
Other considerations
If we changed this behaviour (and made static calls potentially dynamically non-local), we would probably want to revisit the meaning of final, private and protected as qualifiers on static methods of a class. We would then all have to get used to the fact that private static and public final methods are not overridden, and can therefore be safely resolved at compile-time, and are "safe" to read as local references.
Actually we were wrong.
Despite Java doesn't allow you to override static methods by default, if you look thoroughly through documentation of Class and Method classes in Java, you can still find a way to emulate static methods overriding by following workaround:
import java.lang.reflect.InvocationTargetException;
import java.math.BigDecimal;
class RegularEmployee {
private BigDecimal salary = BigDecimal.ONE;
public void setSalary(BigDecimal salary) {
this.salary = salary;
}
public static BigDecimal getBonusMultiplier() {
return new BigDecimal(".02");
}
public BigDecimal calculateBonus() {
return salary.multiply(this.getBonusMultiplier());
}
public BigDecimal calculateOverridenBonus() {
try {
// System.out.println(this.getClass().getDeclaredMethod(
// "getBonusMultiplier").toString());
try {
return salary.multiply((BigDecimal) this.getClass()
.getDeclaredMethod("getBonusMultiplier").invoke(this));
} catch (IllegalAccessException e) {
e.printStackTrace();
} catch (IllegalArgumentException e) {
e.printStackTrace();
} catch (InvocationTargetException e) {
e.printStackTrace();
}
} catch (NoSuchMethodException e) {
e.printStackTrace();
} catch (SecurityException e) {
e.printStackTrace();
}
return null;
}
// ... presumably lots of other code ...
}
final class SpecialEmployee extends RegularEmployee {
public static BigDecimal getBonusMultiplier() {
return new BigDecimal(".03");
}
}
public class StaticTestCoolMain {
static public void main(String[] args) {
RegularEmployee Alan = new RegularEmployee();
System.out.println(Alan.calculateBonus());
System.out.println(Alan.calculateOverridenBonus());
SpecialEmployee Bob = new SpecialEmployee();
System.out.println(Bob.calculateBonus());
System.out.println(Bob.calculateOverridenBonus());
}
}
Resulting output:
0.02
0.02
0.02
0.03
what we were trying to achieve :)
Even if we declare third variable Carl as RegularEmployee and assign to it instance of SpecialEmployee, we will still have call of RegularEmployee method in first case and call of SpecialEmployee method in second case
RegularEmployee Carl = new SpecialEmployee();
System.out.println(Carl.calculateBonus());
System.out.println(Carl.calculateOverridenBonus());
just look at output console:
0.02
0.03
;)
Static methods are treated as global by the JVM, there are not bound to an object instance at all.
It could conceptually be possible if you could call static methods from class objects (like in languages like Smalltalk) but it's not the case in Java.
EDIT
You can overload static method, that's ok. But you can not override a static method, because class are no first-class object. You can use reflection to get the class of an object at run-time, but the object that you get does not parallel the class hierarchy.
class MyClass { ... }
class MySubClass extends MyClass { ... }
MyClass obj1 = new MyClass();
MySubClass obj2 = new MySubClass();
ob2 instanceof MyClass --> true
Class clazz1 = obj1.getClass();
Class clazz2 = obj2.getClass();
clazz2 instanceof clazz1 --> false
You can reflect over the classes, but it stops there. You don't invoke a static method by using clazz1.staticMethod(), but using MyClass.staticMethod(). A static method is not bound to an object and there is hence no notion of this nor super in a static method. A static method is a global function; as a consequence there is also no notion of polymorphism and, therefore, method overriding makes no sense.
But this could be possible if MyClass was an object at run-time on which you invoke a method, as in Smalltalk (or maybe JRuby as one comment suggest, but I know nothing of JRuby).
Oh yeah... one more thing. You can invoke a static method through an object obj1.staticMethod() but that really syntactic sugar for MyClass.staticMethod() and should be avoided. It usually raises a warning in modern IDE. I don't know why they ever allowed this shortcut.
Method overriding is made possible by dynamic dispatching, meaning that the declared type of an object doesn't determine its behavior, but rather its runtime type:
Animal lassie = new Dog();
lassie.speak(); // outputs "woof!"
Animal kermit = new Frog();
kermit.speak(); // outputs "ribbit!"
Even though both lassie and kermit are declared as objects of type Animal, their behavior (method .speak()) varies because dynamic dispatching will only bind the method call .speak() to an implementation at run time - not at compile time.
Now, here's where the static keyword starts to make sense: the word "static" is an antonym for "dynamic". So the reason why you can't override static methods is because there is no dynamic dispatching on static members - because static literally means "not dynamic". If they dispatched dynamically (and thus could be overriden) the static keyword just wouldn't make sense anymore.
Yes. Practically Java allows overriding static method, and No theoretically if you Override a static method in Java then it will compile and run smoothly but it will lose Polymorphism which is the basic property of Java. You will Read Everywhere that it is not possible to try yourself compiling and running. you will get your answer. e.g. If you Have Class Animal and a static method eat() and you Override that static method in its Subclass lets called it Dog. Then when wherever you Assign a Dog object to an Animal Reference and call eat() according to Java Dog's eat() should have been called but in static Overriding Animals' eat() will Be Called.
class Animal {
public static void eat() {
System.out.println("Animal Eating");
}
}
class Dog extends Animal{
public static void eat() {
System.out.println("Dog Eating");
}
}
class Test {
public static void main(String args[]) {
Animal obj= new Dog();//Dog object in animal
obj.eat(); //should call dog's eat but it didn't
}
}
Output Animal Eating
According to Polymorphism Principle of Java, the Output Should be Dog Eating.
But the result was different because to support Polymorphism Java uses Late Binding that means methods are called only at the run-time but not in the case of static methods. In static methods compiler calls methods at the compile time rather than the run-time, so we get methods according to the reference and not according to the object a reference a containing that's why You can say Practically it supports static overring but theoretically, it doesn't.
In Java (and many OOP languages, but I cannot speak for all; and some do not have static at all) all methods have a fixed signature - the parameters and types. In a virtual method, the first parameter is implied: a reference to the object itself and when called from within the object, the compiler automatically adds this.
There is no difference for static methods - they still have a fixed signature. However, by declaring the method static you have explicitly stated that the compiler must not include the implied object parameter at the beginning of that signature. Therefore, any other code that calls this must must not attempt to put a reference to an object on the stack. If it did do that, then the method execution would not work since the parameters would be in the wrong place - shifted by one - on the stack.
Because of this difference between the two; virtual methods always have a reference to the context object (i.e. this) so then it is possible to reference anything within the heap that belong to that instance of the object. But with static methods, since there is no reference passed, that method cannot access any object variables and methods since the context is not known.
If you wish that Java would change the definition so that a object context is passed in for every method, static or virtual, then you would in essence have only virtual methods.
As someone asked in a comment to the op - what is your reason and purpose for wanting this feature?
I do not know Ruby much, as this was mentioned by the OP, I did some research. I see that in Ruby classes are really a special kind of object and one can create (even dynamically) new methods. Classes are full class objects in Ruby, they are not in Java. This is just something you will have to accept when working with Java (or C#). These are not dynamic languages, though C# is adding some forms of dynamic. In reality, Ruby does not have "static" methods as far as I could find - in that case these are methods on the singleton class object. You can then override this singleton with a new class and the methods in the previous class object will call those defined in the new class (correct?). So if you called a method in the context of the original class it still would only execute the original statics, but calling a method in the derived class, would call methods either from the parent or sub-class. Interesting and I can see some value in that. It takes a different thought pattern.
Since you are working in Java, you will need to adjust to that way of doing things. Why they did this? Well, probably to improve performance at the time based on the technology and understanding that was available. Computer languages are constantly evolving. Go back far enough and there is no such thing as OOP. In the future, there will be other new ideas.
EDIT: One other comment. Now that I see the differences and as I Java/C# developer myself, I can understand why the answers you get from Java developers may be confusing if you are coming from a language like Ruby. Java static methods are not the same as Ruby class methods. Java developers will have a hard time understanding this, as will conversely those who work mostly with a language like Ruby/Smalltalk. I can see how this would also be greatly confusing by the fact that Java also uses "class method" as another way to talk about static methods but this same term is used differently by Ruby. Java does not have Ruby style class methods (sorry); Ruby does not have Java style static methods which are really just old procedural style functions, as found in C.
By the way - thanks for the question! I learned something new for me today about class methods (Ruby style).
Well... the answer is NO if you think from the perspective of how an overriden method should behave in Java. But, you don't get any compiler error if you try to override a static method. That means, if you try to override, Java doesn't stop you doing that; but you certainly don't get the same effect as you get for non-static methods. Overriding in Java simply means that the particular method would be called based on the run time type of the object and not on the compile time type of it (which is the case with overriden static methods). Okay... any guesses for the reason why do they behave strangely? Because they are class methods and hence access to them is always resolved during compile time only using the compile time type information. Accessing them using object references is just an extra liberty given by the designers of Java and we should certainly not think of stopping that practice only when they restrict it :-)
Example: let's try to see what happens if we try overriding a static method:-
class SuperClass {
// ......
public static void staticMethod() {
System.out.println("SuperClass: inside staticMethod");
}
// ......
}
public class SubClass extends SuperClass {
// ......
// overriding the static method
public static void staticMethod() {
System.out.println("SubClass: inside staticMethod");
}
// ......
public static void main(String[] args) {
// ......
SuperClass superClassWithSuperCons = new SuperClass();
SuperClass superClassWithSubCons = new SubClass();
SubClass subClassWithSubCons = new SubClass();
superClassWithSuperCons.staticMethod();
superClassWithSubCons.staticMethod();
subClassWithSubCons.staticMethod();
// ...
}
}
Output:-
SuperClass: inside staticMethod
SuperClass: inside staticMethod
SubClass: inside staticMethod
Notice the second line of the output. Had the staticMethod been overriden this line should have been identical to the third line as we're invoking the 'staticMethod()' on an object of Runtime Type as 'SubClass' and not as 'SuperClass'. This confirms that the static methods are always resolved using their compile time type information only.
I like and double Jay's comment (https://stackoverflow.com/a/2223803/1517187).
I agree that this is the bad design of Java.
Many other languages support overriding static methods, as we see in previous comments.
I feel Jay has also come to Java from Delphi like me.
Delphi (Object Pascal) was one of the languages implementing OOP before Java and one of the first languages used for commercial application development.
It is obvious that many people had experience with that language since it was in the past the only language to write commercial GUI products. And - yes, we could in Delphi override static methods. Actually, static methods in Delphi are called "class methods", while Delphi had the different concept of "Delphi static methods" which were methods with early binding. To override methods you had to use late binding, declare "virtual" directive. So it was very convenient and intuitive and I would expect this in Java.
In general it doesn't make sense to allow 'overriding' of static methods as there would be no good way to determine which one to call at runtime. Taking the Employee example, if we call RegularEmployee.getBonusMultiplier() - which method is supposed to be executed?
In the case of Java, one could imagine a language definition where it is possible to 'override' static methods as long as they are called through an object instance. However, all this would do is to re-implement regular class methods, adding redundancy to the language without really adding any benefit.
overriding is reserved for instance members to support polymorphic behaviour. static class members do not belong to a particular instance. instead, static members belong to the class and as a result overriding is not supported because subclasses only inherit protected and public instance members and not static members. You may want to define an inerface and research factory and/or strategy design patterns to evaluate an alternate approach.
By overriding we can create a polymorphic nature depending on the object type. Static method has no relation with object. So java can not support static method overriding.
By overriding, you achieve dynamic polymorphism.
When you say overriding static methods, the words you are trying to use are contradictory.
Static says - compile time, overriding is used for dynamic polymorphism.
Both are opposite in nature, and hence can't be used together.
Dynamic polymorphic behavior comes when a programmer uses an object and accessing an instance method. JRE will map different instance methods of different classes based on what kind of object you are using.
When you say overriding static methods, static methods we will access by using the class name, which will be linked at compile time, so there is no concept of linking methods at runtime with static methods. So the term "overriding" static methods itself doesn't make any meaning.
Note: even if you access a class method with an object, still java compiler is intelligent enough to find it out, and will do static linking.
Overriding in Java simply means that the particular method would be called based on the runtime type
of the object and not on the compile-time type of it (which is the case with overridden static methods). As static methods are class methods they are not instance methods so they have nothing to do with the fact which reference is pointing to which Object or instance, because due to the nature of static method it belongs to a specific class. You can redeclare it in the subclass but that subclass won't know anything about the parent class' static methods because, as I said, it is specific to only that class in which it has been declared. Accessing them using object references is just an extra liberty given by the designers of Java and we should certainly not think of stopping that practice only when they restrict it
more details and example
http://faisalbhagat.blogspot.com/2014/09/method-overriding-and-method-hiding.html
What good will it do to override static methods. You cannot call static methods through an instance.
MyClass.static1()
MySubClass.static1() // If you overrode, you have to call it through MySubClass anyway.
EDIT : It appears that through an unfortunate oversight in language design, you can call static methods through an instance. Generally nobody does that. My bad.
Answer of this question is simple, the method or variable marked as static belongs to the class only, So that static method cannot be inherited in the sub class because they belong to the super class only.
Easy solution: Use singleton instance. It will allow overrides and inheritance.
In my system, I have SingletonsRegistry class, which returns instance for passed Class. If instance is not found, it is created.
Haxe language class:
package rflib.common.utils;
import haxe.ds.ObjectMap;
class SingletonsRegistry
{
public static var instances:Map<Class<Dynamic>, Dynamic>;
static function __init__()
{
StaticsInitializer.addCallback(SingletonsRegistry, function()
{
instances = null;
});
}
public static function getInstance(cls:Class<Dynamic>, ?args:Array<Dynamic>)
{
if (instances == null) {
instances = untyped new ObjectMap<Dynamic, Dynamic>();
}
if (!instances.exists(cls))
{
if (args == null) args = [];
instances.set(cls, Type.createInstance(cls, args));
}
return instances.get(cls);
}
public static function validate(inst:Dynamic, cls:Class<Dynamic>)
{
if (instances == null) return;
var inst2 = instances[cls];
if (inst2 != null && inst != inst2) throw "Can\'t create multiple instances of " + Type.getClassName(cls) + " - it's singleton!";
}
}
A Static method, variable, block or nested class belongs to the entire class rather than an object.
A Method in Java is used to expose the behaviour of an Object / Class. Here, as the method is static (i.e, static method is used to represent the behaviour of a class only.) changing/ overriding the behaviour of entire class will violate the phenomenon of one of the fundamental pillar of Object oriented programming i.e, high cohesion. (remember a constructor is a special kind of method in Java.)
High Cohesion - One class should have only one role. For example: A car class should produce only car objects and not bike, trucks, planes etc. But the Car class may have some features(behaviour) that belongs to itself only.
Therefore, while designing the java programming language. The language designers thought to allow developers to keep some behaviours of a class to itself only by making a method static in nature.
The below piece code tries to override the static method, but will not encounter any compilation error.
public class Vehicle {
static int VIN;
public static int getVehileNumber() {
return VIN;
}}
class Car extends Vehicle {
static int carNumber;
public static int getVehileNumber() {
return carNumber;
}}
This is because, here we are not overriding a method but we are just re-declaring it. Java allows re-declaration of a method (static/non-static).
Removing the static keyword from getVehileNumber() method of Car class will result into compilation error, Since, we are trying to change the functionality of static method which belongs to Vehicle class only.
Also, If the getVehileNumber() is declared as final then the code will not compile, Since the final keyword restricts the programmer from re-declaring the method.
public static final int getVehileNumber() {
return VIN; }
Overall, this is upto software designers for where to use the static methods.
I personally prefer to use static methods to perform some actions without creating any instance of a class. Secondly, to hide the behaviour of a class from outside world.
Here is a simple explanation. A static method is associated with a class while an instance method is associated with a particular object. Overrides allow calling the different implementation of the overridden methods associated with the particular object. So it is counter-intuitive to override static method which is not even associated with objects but the class itself in the first place. So static methods cannot be overridden based on what object is calling it, it will always be associated with the class where it was created.
Now seeing above answers everyone knows that we can't override static methods, but one should not misunderstood about the concept of accessing static methods from subclass.
We can access static methods of super class with subclass reference if this static method has not been hidden by new static method defined in sub class.
For Example, see below code:-
public class StaticMethodsHiding {
public static void main(String[] args) {
SubClass.hello();
}
}
class SuperClass {
static void hello(){
System.out.println("SuperClass saying Hello");
}
}
class SubClass extends SuperClass {
// static void hello() {
// System.out.println("SubClass Hello");
// }
}
Output:-
SuperClass saying Hello
See Java oracle docs and search for What You Can Do in a Subclass for details about hiding of static methods in sub class.
Thanks
The following code shows that it is possible:
class OverridenStaticMeth {
static void printValue() {
System.out.println("Overriden Meth");
}
}
public class OverrideStaticMeth extends OverridenStaticMeth {
static void printValue() {
System.out.println("Overriding Meth");
}
public static void main(String[] args) {
OverridenStaticMeth osm = new OverrideStaticMeth();
osm.printValue();
System.out.println("now, from main");
printValue();
}
}
Why is it not possible to override static methods?
If possible, please use an example.
Overriding depends on having an instance of a class. The point of polymorphism is that you can subclass a class and the objects implementing those subclasses will have different behaviors for the same methods defined in the superclass (and overridden in the subclasses). A static method is not associated with any instance of a class so the concept is not applicable.
There were two considerations driving Java's design that impacted this. One was a concern with performance: there had been a lot of criticism of Smalltalk about it being too slow (garbage collection and polymorphic calls being part of that) and Java's creators were determined to avoid that. Another was the decision that the target audience for Java was C++ developers. Making static methods work the way they do had the benefit of familiarity for C++ programmers and was also very fast, because there's no need to wait until runtime to figure out which method to call.
Personally I think this is a flaw in the design of Java. Yes, yes, I understand that non-static methods are attached to an instance while static methods are attached to a class, etc etc. Still, consider the following code:
public class RegularEmployee {
private BigDecimal salary;
public void setSalary(BigDecimal salary) {
this.salary = salary;
}
public static BigDecimal getBonusMultiplier() {
return new BigDecimal(".02");
}
public BigDecimal calculateBonus() {
return salary.multiply(getBonusMultiplier());
}
/* ... presumably lots of other code ... */
}
public class SpecialEmployee extends RegularEmployee {
public static BigDecimal getBonusMultiplier() {
return new BigDecimal(".03");
}
}
This code will not work as you might expect. Namely, SpecialEmployee's get a 2% bonus just like regular employees. But if you remove the "static"s, then SpecialEmployee's get a 3% bonus.
(Admittedly, this example is poor coding style in that in real life you would likely want the bonus multiplier to be in a database somewhere rather than hard-coded. But that's just because I didn't want to bog down the example with a lot of code irrelevant to the point.)
It seems quite plausible to me that you might want to make getBonusMultiplier static. Perhaps you want to be able to display the bonus multiplier for all the categories of employees, without needing to have an instance of an employee in each category. What would be the point of searching for such example instances? What if we are creating a new category of employee and don't have any employees assigned to it yet? This is quite logically a static function.
But it doesn't work.
And yes, yes, I can think of any number of ways to rewrite the above code to make it work. My point is not that it creates an unsolvable problem, but that it creates a trap for the unwary programmer, because the language does not behave as I think a reasonable person would expect.
Perhaps if I tried to write a compiler for an OOP language, I would quickly see why implementing it so that static functions can be overriden would be difficult or impossible.
Or perhaps there is some good reason why Java behaves this way. Can anyone point out an advantage to this behavior, some category of problem that is made easier by this? I mean, don't just point me to the Java language spec and say "see, this is documented how it behaves". I know that. But is there a good reason why it SHOULD behave this way? (Besides the obvious "making it work right was too hard"...)
Update
#VicKirk: If you mean that this is "bad design" because it doesn't fit how Java handles statics, my reply is, "Well, duh, of course." As I said in my original post, it doesn't work. But if you mean that it is bad design in the sense that there would be something fundamentally wrong with a language where this worked, i.e. where statics could be overridden just like virtual functions, that this would somehow introduce an ambiguity or it would be impossible to implement efficiently or some such, I reply, "Why? What's wrong with the concept?"
I think the example I give is a very natural thing to want to do. I have a class that has a function that does not depend on any instance data, and which I might very reasonably want to call independent of an instance, as well as wanting to call from within an instance method. Why should this not work? I've run into this situation a fair number of times over the years. In practice I get around it by making the function virtual, and then creating a static method whose only purpose in life is to be a static method that passes the call on to the virtual method with a dummy instance. That seems like a very roundabout way to get there.
The short answer is: it is entirely possible, but Java doesn't do it.
Here is some code which illustrates the current state of affairs in Java:
File Base.java:
package sp.trial;
public class Base {
static void printValue() {
System.out.println(" Called static Base method.");
}
void nonStatPrintValue() {
System.out.println(" Called non-static Base method.");
}
void nonLocalIndirectStatMethod() {
System.out.println(" Non-static calls overridden(?) static:");
System.out.print(" ");
this.printValue();
}
}
File Child.java:
package sp.trial;
public class Child extends Base {
static void printValue() {
System.out.println(" Called static Child method.");
}
void nonStatPrintValue() {
System.out.println(" Called non-static Child method.");
}
void localIndirectStatMethod() {
System.out.println(" Non-static calls own static:");
System.out.print(" ");
printValue();
}
public static void main(String[] args) {
System.out.println("Object: static type Base; runtime type Child:");
Base base = new Child();
base.printValue();
base.nonStatPrintValue();
System.out.println("Object: static type Child; runtime type Child:");
Child child = new Child();
child.printValue();
child.nonStatPrintValue();
System.out.println("Class: Child static call:");
Child.printValue();
System.out.println("Class: Base static call:");
Base.printValue();
System.out.println("Object: static/runtime type Child -- call static from non-static method of Child:");
child.localIndirectStatMethod();
System.out.println("Object: static/runtime type Child -- call static from non-static method of Base:");
child.nonLocalIndirectStatMethod();
}
}
If you run this (I did it on a Mac, from Eclipse, using Java 1.6) you get:
Object: static type Base; runtime type Child.
Called static Base method.
Called non-static Child method.
Object: static type Child; runtime type Child.
Called static Child method.
Called non-static Child method.
Class: Child static call.
Called static Child method.
Class: Base static call.
Called static Base method.
Object: static/runtime type Child -- call static from non-static method of Child.
Non-static calls own static.
Called static Child method.
Object: static/runtime type Child -- call static from non-static method of Base.
Non-static calls overridden(?) static.
Called static Base method.
Here, the only cases which might be a surprise (and which the question is about) appear to be the first case:
"The run-time type is not used to determine which static methods are called, even when called with an object instance (obj.staticMethod())."
and the last case:
"When calling a static method from within an object method of a class, the static method chosen is the one accessible from the class itself and not from the class defining the run-time type of the object."
Calling with an object instance
The static call is resolved at compile-time, whereas a non-static method call is resolved at run-time. Notice that although static methods are inherited (from parent) they are not overridden (by child). This could be a surprise if you expected otherwise.
Calling from within an object method
Object method calls are resolved using the run-time type, but static (class) method calls are resolved using the compile-time (declared) type.
Changing the rules
To change these rules, so that the last call in the example called Child.printValue(), static calls would have to be provided with a type at run-time, rather than the compiler resolving the call at compile-time with the declared class of the object (or context). Static calls could then use the (dynamic) type hierarchy to resolve the call, just as object method calls do today.
This would easily be doable (if we changed Java :-O), and is not at all unreasonable, however, it has some interesting considerations.
The main consideration is that we need to decide which static method calls should do this.
At the moment, Java has this "quirk" in the language whereby obj.staticMethod() calls are replaced by ObjectClass.staticMethod() calls (normally with a warning). [Note: ObjectClass is the compile-time type of obj.] These would be good candidates for overriding in this way, taking the run-time type of obj.
If we did it would make method bodies harder to read: static calls in a parent class could potentially be dynamically "re-routed". To avoid this we would have to call the static method with a class name -- and this makes the calls more obviously resolved with the compile-time type hierarchy (as now).
The other ways of invoking a static method are more tricky: this.staticMethod() should mean the same as obj.staticMethod(), taking the run-time type of this. However, this might cause some headaches with existing programs, which call (apparently local) static methods without decoration (which is arguably equivalent to this.method()).
So what about unadorned calls staticMethod()? I suggest they do the same as today, and use the local class context to decide what to do. Otherwise great confusion would ensue. Of course it means that method() would mean this.method() if method was a non-static method, and ThisClass.method() if method were a static method. This is another source of confusion.
Other considerations
If we changed this behaviour (and made static calls potentially dynamically non-local), we would probably want to revisit the meaning of final, private and protected as qualifiers on static methods of a class. We would then all have to get used to the fact that private static and public final methods are not overridden, and can therefore be safely resolved at compile-time, and are "safe" to read as local references.
Actually we were wrong.
Despite Java doesn't allow you to override static methods by default, if you look thoroughly through documentation of Class and Method classes in Java, you can still find a way to emulate static methods overriding by following workaround:
import java.lang.reflect.InvocationTargetException;
import java.math.BigDecimal;
class RegularEmployee {
private BigDecimal salary = BigDecimal.ONE;
public void setSalary(BigDecimal salary) {
this.salary = salary;
}
public static BigDecimal getBonusMultiplier() {
return new BigDecimal(".02");
}
public BigDecimal calculateBonus() {
return salary.multiply(this.getBonusMultiplier());
}
public BigDecimal calculateOverridenBonus() {
try {
// System.out.println(this.getClass().getDeclaredMethod(
// "getBonusMultiplier").toString());
try {
return salary.multiply((BigDecimal) this.getClass()
.getDeclaredMethod("getBonusMultiplier").invoke(this));
} catch (IllegalAccessException e) {
e.printStackTrace();
} catch (IllegalArgumentException e) {
e.printStackTrace();
} catch (InvocationTargetException e) {
e.printStackTrace();
}
} catch (NoSuchMethodException e) {
e.printStackTrace();
} catch (SecurityException e) {
e.printStackTrace();
}
return null;
}
// ... presumably lots of other code ...
}
final class SpecialEmployee extends RegularEmployee {
public static BigDecimal getBonusMultiplier() {
return new BigDecimal(".03");
}
}
public class StaticTestCoolMain {
static public void main(String[] args) {
RegularEmployee Alan = new RegularEmployee();
System.out.println(Alan.calculateBonus());
System.out.println(Alan.calculateOverridenBonus());
SpecialEmployee Bob = new SpecialEmployee();
System.out.println(Bob.calculateBonus());
System.out.println(Bob.calculateOverridenBonus());
}
}
Resulting output:
0.02
0.02
0.02
0.03
what we were trying to achieve :)
Even if we declare third variable Carl as RegularEmployee and assign to it instance of SpecialEmployee, we will still have call of RegularEmployee method in first case and call of SpecialEmployee method in second case
RegularEmployee Carl = new SpecialEmployee();
System.out.println(Carl.calculateBonus());
System.out.println(Carl.calculateOverridenBonus());
just look at output console:
0.02
0.03
;)
Static methods are treated as global by the JVM, there are not bound to an object instance at all.
It could conceptually be possible if you could call static methods from class objects (like in languages like Smalltalk) but it's not the case in Java.
EDIT
You can overload static method, that's ok. But you can not override a static method, because class are no first-class object. You can use reflection to get the class of an object at run-time, but the object that you get does not parallel the class hierarchy.
class MyClass { ... }
class MySubClass extends MyClass { ... }
MyClass obj1 = new MyClass();
MySubClass obj2 = new MySubClass();
ob2 instanceof MyClass --> true
Class clazz1 = obj1.getClass();
Class clazz2 = obj2.getClass();
clazz2 instanceof clazz1 --> false
You can reflect over the classes, but it stops there. You don't invoke a static method by using clazz1.staticMethod(), but using MyClass.staticMethod(). A static method is not bound to an object and there is hence no notion of this nor super in a static method. A static method is a global function; as a consequence there is also no notion of polymorphism and, therefore, method overriding makes no sense.
But this could be possible if MyClass was an object at run-time on which you invoke a method, as in Smalltalk (or maybe JRuby as one comment suggest, but I know nothing of JRuby).
Oh yeah... one more thing. You can invoke a static method through an object obj1.staticMethod() but that really syntactic sugar for MyClass.staticMethod() and should be avoided. It usually raises a warning in modern IDE. I don't know why they ever allowed this shortcut.
Method overriding is made possible by dynamic dispatching, meaning that the declared type of an object doesn't determine its behavior, but rather its runtime type:
Animal lassie = new Dog();
lassie.speak(); // outputs "woof!"
Animal kermit = new Frog();
kermit.speak(); // outputs "ribbit!"
Even though both lassie and kermit are declared as objects of type Animal, their behavior (method .speak()) varies because dynamic dispatching will only bind the method call .speak() to an implementation at run time - not at compile time.
Now, here's where the static keyword starts to make sense: the word "static" is an antonym for "dynamic". So the reason why you can't override static methods is because there is no dynamic dispatching on static members - because static literally means "not dynamic". If they dispatched dynamically (and thus could be overriden) the static keyword just wouldn't make sense anymore.
Yes. Practically Java allows overriding static method, and No theoretically if you Override a static method in Java then it will compile and run smoothly but it will lose Polymorphism which is the basic property of Java. You will Read Everywhere that it is not possible to try yourself compiling and running. you will get your answer. e.g. If you Have Class Animal and a static method eat() and you Override that static method in its Subclass lets called it Dog. Then when wherever you Assign a Dog object to an Animal Reference and call eat() according to Java Dog's eat() should have been called but in static Overriding Animals' eat() will Be Called.
class Animal {
public static void eat() {
System.out.println("Animal Eating");
}
}
class Dog extends Animal{
public static void eat() {
System.out.println("Dog Eating");
}
}
class Test {
public static void main(String args[]) {
Animal obj= new Dog();//Dog object in animal
obj.eat(); //should call dog's eat but it didn't
}
}
Output Animal Eating
According to Polymorphism Principle of Java, the Output Should be Dog Eating.
But the result was different because to support Polymorphism Java uses Late Binding that means methods are called only at the run-time but not in the case of static methods. In static methods compiler calls methods at the compile time rather than the run-time, so we get methods according to the reference and not according to the object a reference a containing that's why You can say Practically it supports static overring but theoretically, it doesn't.
In Java (and many OOP languages, but I cannot speak for all; and some do not have static at all) all methods have a fixed signature - the parameters and types. In a virtual method, the first parameter is implied: a reference to the object itself and when called from within the object, the compiler automatically adds this.
There is no difference for static methods - they still have a fixed signature. However, by declaring the method static you have explicitly stated that the compiler must not include the implied object parameter at the beginning of that signature. Therefore, any other code that calls this must must not attempt to put a reference to an object on the stack. If it did do that, then the method execution would not work since the parameters would be in the wrong place - shifted by one - on the stack.
Because of this difference between the two; virtual methods always have a reference to the context object (i.e. this) so then it is possible to reference anything within the heap that belong to that instance of the object. But with static methods, since there is no reference passed, that method cannot access any object variables and methods since the context is not known.
If you wish that Java would change the definition so that a object context is passed in for every method, static or virtual, then you would in essence have only virtual methods.
As someone asked in a comment to the op - what is your reason and purpose for wanting this feature?
I do not know Ruby much, as this was mentioned by the OP, I did some research. I see that in Ruby classes are really a special kind of object and one can create (even dynamically) new methods. Classes are full class objects in Ruby, they are not in Java. This is just something you will have to accept when working with Java (or C#). These are not dynamic languages, though C# is adding some forms of dynamic. In reality, Ruby does not have "static" methods as far as I could find - in that case these are methods on the singleton class object. You can then override this singleton with a new class and the methods in the previous class object will call those defined in the new class (correct?). So if you called a method in the context of the original class it still would only execute the original statics, but calling a method in the derived class, would call methods either from the parent or sub-class. Interesting and I can see some value in that. It takes a different thought pattern.
Since you are working in Java, you will need to adjust to that way of doing things. Why they did this? Well, probably to improve performance at the time based on the technology and understanding that was available. Computer languages are constantly evolving. Go back far enough and there is no such thing as OOP. In the future, there will be other new ideas.
EDIT: One other comment. Now that I see the differences and as I Java/C# developer myself, I can understand why the answers you get from Java developers may be confusing if you are coming from a language like Ruby. Java static methods are not the same as Ruby class methods. Java developers will have a hard time understanding this, as will conversely those who work mostly with a language like Ruby/Smalltalk. I can see how this would also be greatly confusing by the fact that Java also uses "class method" as another way to talk about static methods but this same term is used differently by Ruby. Java does not have Ruby style class methods (sorry); Ruby does not have Java style static methods which are really just old procedural style functions, as found in C.
By the way - thanks for the question! I learned something new for me today about class methods (Ruby style).
Well... the answer is NO if you think from the perspective of how an overriden method should behave in Java. But, you don't get any compiler error if you try to override a static method. That means, if you try to override, Java doesn't stop you doing that; but you certainly don't get the same effect as you get for non-static methods. Overriding in Java simply means that the particular method would be called based on the run time type of the object and not on the compile time type of it (which is the case with overriden static methods). Okay... any guesses for the reason why do they behave strangely? Because they are class methods and hence access to them is always resolved during compile time only using the compile time type information. Accessing them using object references is just an extra liberty given by the designers of Java and we should certainly not think of stopping that practice only when they restrict it :-)
Example: let's try to see what happens if we try overriding a static method:-
class SuperClass {
// ......
public static void staticMethod() {
System.out.println("SuperClass: inside staticMethod");
}
// ......
}
public class SubClass extends SuperClass {
// ......
// overriding the static method
public static void staticMethod() {
System.out.println("SubClass: inside staticMethod");
}
// ......
public static void main(String[] args) {
// ......
SuperClass superClassWithSuperCons = new SuperClass();
SuperClass superClassWithSubCons = new SubClass();
SubClass subClassWithSubCons = new SubClass();
superClassWithSuperCons.staticMethod();
superClassWithSubCons.staticMethod();
subClassWithSubCons.staticMethod();
// ...
}
}
Output:-
SuperClass: inside staticMethod
SuperClass: inside staticMethod
SubClass: inside staticMethod
Notice the second line of the output. Had the staticMethod been overriden this line should have been identical to the third line as we're invoking the 'staticMethod()' on an object of Runtime Type as 'SubClass' and not as 'SuperClass'. This confirms that the static methods are always resolved using their compile time type information only.
I like and double Jay's comment (https://stackoverflow.com/a/2223803/1517187).
I agree that this is the bad design of Java.
Many other languages support overriding static methods, as we see in previous comments.
I feel Jay has also come to Java from Delphi like me.
Delphi (Object Pascal) was one of the languages implementing OOP before Java and one of the first languages used for commercial application development.
It is obvious that many people had experience with that language since it was in the past the only language to write commercial GUI products. And - yes, we could in Delphi override static methods. Actually, static methods in Delphi are called "class methods", while Delphi had the different concept of "Delphi static methods" which were methods with early binding. To override methods you had to use late binding, declare "virtual" directive. So it was very convenient and intuitive and I would expect this in Java.
In general it doesn't make sense to allow 'overriding' of static methods as there would be no good way to determine which one to call at runtime. Taking the Employee example, if we call RegularEmployee.getBonusMultiplier() - which method is supposed to be executed?
In the case of Java, one could imagine a language definition where it is possible to 'override' static methods as long as they are called through an object instance. However, all this would do is to re-implement regular class methods, adding redundancy to the language without really adding any benefit.
overriding is reserved for instance members to support polymorphic behaviour. static class members do not belong to a particular instance. instead, static members belong to the class and as a result overriding is not supported because subclasses only inherit protected and public instance members and not static members. You may want to define an inerface and research factory and/or strategy design patterns to evaluate an alternate approach.
By overriding we can create a polymorphic nature depending on the object type. Static method has no relation with object. So java can not support static method overriding.
By overriding, you achieve dynamic polymorphism.
When you say overriding static methods, the words you are trying to use are contradictory.
Static says - compile time, overriding is used for dynamic polymorphism.
Both are opposite in nature, and hence can't be used together.
Dynamic polymorphic behavior comes when a programmer uses an object and accessing an instance method. JRE will map different instance methods of different classes based on what kind of object you are using.
When you say overriding static methods, static methods we will access by using the class name, which will be linked at compile time, so there is no concept of linking methods at runtime with static methods. So the term "overriding" static methods itself doesn't make any meaning.
Note: even if you access a class method with an object, still java compiler is intelligent enough to find it out, and will do static linking.
Overriding in Java simply means that the particular method would be called based on the runtime type
of the object and not on the compile-time type of it (which is the case with overridden static methods). As static methods are class methods they are not instance methods so they have nothing to do with the fact which reference is pointing to which Object or instance, because due to the nature of static method it belongs to a specific class. You can redeclare it in the subclass but that subclass won't know anything about the parent class' static methods because, as I said, it is specific to only that class in which it has been declared. Accessing them using object references is just an extra liberty given by the designers of Java and we should certainly not think of stopping that practice only when they restrict it
more details and example
http://faisalbhagat.blogspot.com/2014/09/method-overriding-and-method-hiding.html
What good will it do to override static methods. You cannot call static methods through an instance.
MyClass.static1()
MySubClass.static1() // If you overrode, you have to call it through MySubClass anyway.
EDIT : It appears that through an unfortunate oversight in language design, you can call static methods through an instance. Generally nobody does that. My bad.
Answer of this question is simple, the method or variable marked as static belongs to the class only, So that static method cannot be inherited in the sub class because they belong to the super class only.
Easy solution: Use singleton instance. It will allow overrides and inheritance.
In my system, I have SingletonsRegistry class, which returns instance for passed Class. If instance is not found, it is created.
Haxe language class:
package rflib.common.utils;
import haxe.ds.ObjectMap;
class SingletonsRegistry
{
public static var instances:Map<Class<Dynamic>, Dynamic>;
static function __init__()
{
StaticsInitializer.addCallback(SingletonsRegistry, function()
{
instances = null;
});
}
public static function getInstance(cls:Class<Dynamic>, ?args:Array<Dynamic>)
{
if (instances == null) {
instances = untyped new ObjectMap<Dynamic, Dynamic>();
}
if (!instances.exists(cls))
{
if (args == null) args = [];
instances.set(cls, Type.createInstance(cls, args));
}
return instances.get(cls);
}
public static function validate(inst:Dynamic, cls:Class<Dynamic>)
{
if (instances == null) return;
var inst2 = instances[cls];
if (inst2 != null && inst != inst2) throw "Can\'t create multiple instances of " + Type.getClassName(cls) + " - it's singleton!";
}
}
A Static method, variable, block or nested class belongs to the entire class rather than an object.
A Method in Java is used to expose the behaviour of an Object / Class. Here, as the method is static (i.e, static method is used to represent the behaviour of a class only.) changing/ overriding the behaviour of entire class will violate the phenomenon of one of the fundamental pillar of Object oriented programming i.e, high cohesion. (remember a constructor is a special kind of method in Java.)
High Cohesion - One class should have only one role. For example: A car class should produce only car objects and not bike, trucks, planes etc. But the Car class may have some features(behaviour) that belongs to itself only.
Therefore, while designing the java programming language. The language designers thought to allow developers to keep some behaviours of a class to itself only by making a method static in nature.
The below piece code tries to override the static method, but will not encounter any compilation error.
public class Vehicle {
static int VIN;
public static int getVehileNumber() {
return VIN;
}}
class Car extends Vehicle {
static int carNumber;
public static int getVehileNumber() {
return carNumber;
}}
This is because, here we are not overriding a method but we are just re-declaring it. Java allows re-declaration of a method (static/non-static).
Removing the static keyword from getVehileNumber() method of Car class will result into compilation error, Since, we are trying to change the functionality of static method which belongs to Vehicle class only.
Also, If the getVehileNumber() is declared as final then the code will not compile, Since the final keyword restricts the programmer from re-declaring the method.
public static final int getVehileNumber() {
return VIN; }
Overall, this is upto software designers for where to use the static methods.
I personally prefer to use static methods to perform some actions without creating any instance of a class. Secondly, to hide the behaviour of a class from outside world.
Here is a simple explanation. A static method is associated with a class while an instance method is associated with a particular object. Overrides allow calling the different implementation of the overridden methods associated with the particular object. So it is counter-intuitive to override static method which is not even associated with objects but the class itself in the first place. So static methods cannot be overridden based on what object is calling it, it will always be associated with the class where it was created.
Now seeing above answers everyone knows that we can't override static methods, but one should not misunderstood about the concept of accessing static methods from subclass.
We can access static methods of super class with subclass reference if this static method has not been hidden by new static method defined in sub class.
For Example, see below code:-
public class StaticMethodsHiding {
public static void main(String[] args) {
SubClass.hello();
}
}
class SuperClass {
static void hello(){
System.out.println("SuperClass saying Hello");
}
}
class SubClass extends SuperClass {
// static void hello() {
// System.out.println("SubClass Hello");
// }
}
Output:-
SuperClass saying Hello
See Java oracle docs and search for What You Can Do in a Subclass for details about hiding of static methods in sub class.
Thanks
The following code shows that it is possible:
class OverridenStaticMeth {
static void printValue() {
System.out.println("Overriden Meth");
}
}
public class OverrideStaticMeth extends OverridenStaticMeth {
static void printValue() {
System.out.println("Overriding Meth");
}
public static void main(String[] args) {
OverridenStaticMeth osm = new OverrideStaticMeth();
osm.printValue();
System.out.println("now, from main");
printValue();
}
}
I was wondering how to achieve the local static variable in java. I know Java wount support it. But what is the better way to achieve the same? I donot want the other methods in my class to access the variable, but it should retain the value across the invocations of the method.
Can somebody please let me know.
I don't think there is any way to achieve this. Java does not support 'local static' a la C, and there is no way to retrofit this while still keeping your sourcecode "real Java"1.
I donot want the other methods in my class to access the variable, but it should retain the value across the invocations of the method.
The best thing would be to make it an ordinary (private) static, and then just don't access it from other methods. The last bit should be easy ... 'cos you are writing the class.
1 - I suppose you could hack something together that involves preprocessing your code, but that will make all sorts of other things unpleasant. My advice is don't go there: it is not worth the pain.
Rather than trying to actually protect the variable, making the code more obscure and complicated, consider logical protection by comment and placement. I declare normal fields at the start of the class, but a field that should only be accessed from one method just before that method. Include a comment saying it should only be used in the one method:
// i should be used only in f
private int i;
/**
* Documentation for f().
*/
public void f(){
System.out.println(i++);
}
What you want is the ability to constraint intermediate computation results within the relevant method itself. To achieve this, you can refer to the following code example. Suppose you want to maintain a static variable i across multiple calls of m(). Instead of having such a static variable, which is not feasible for Java, you can encapsulate variable i into a field of a class A visible only to m(), create a method f(), and move all your code for m() into f(). You can copy, compile, and run the following code, and see how it works.
public class S {
public void m() {
class A {
int i;
void f() {
System.out.println(i++);
}
}
A a = new A();
a.f();
a.f();
a.f();
}
public static void main(String[] args) {
S s = new S();
s.m();
}
}
In theory, yes - but not in conventional manners.
What I would do to create this:
Create that Object in a totally different class, under the private modifier, with no ability to be accessed directly.
Use a debugging tool, such as the JDI to find that variable in the other class, get it's ObjectReference and manipulate directly or create a new variable which references to that object, and use that variable, which references to the object, in your method.
This is quite complicated, as using the JDI is tough, and you would need to run your program on 2 processes.
If you want to do this, I suggest looking into the JDI, but my honest answer would be to look for another solution.
Based on dacongy's idea of using a method local class I created a simple solution:
public class Main {
public static String m() {
class Statics {
static String staticString;
}
if (Statics.staticString == null)
Statics.staticString = "My lazy static method local variable";
return Statics.staticString;
}
}
I have been studying for my Software Development course and came across the question from a sample:
"Why does it make no sense to have both the static and final modifiers in front of a Java method?"
I have had a bit of a research and everywhere I go it says it is not bad practice and there are good reasons for doing so - for example, this stackoverflow question:
Is it a bad idea to declare a final static method?
So, is this question itself nonsensical or is there a legitimate answer to this question?
(There are no given solutions to this sample paper)
static methods cannot be overriden since they're associated not with an instance of class, but with the class itself. For example, this is how you'd usually call static method:
MyClass.myStaticMethod()
And this is how you call an instance method:
new MyClass().myInstanceMethod()
final modifier is used with methods to disallow their override in extending classes.
Because a static method cannot be overridden. There is therefore no point in marking it final.
Note however that static final variables (which are, oddly, therefore NOT variables because they cannot change) are very useful because their values can be inlined by the compiler.
Static methods can be sort of overridden (though that's not the technical term), since it is resolved at runtime, searching upwards in class chain until it's found. But this "feature" is probably a mistake; people don't use it, people don't know about it, we should pretend it doesn't exist.
From the Java Language Spec:
A class method is always invoked without reference to a particular
object. It is a compile-time error to attempt to reference the current
object using the keyword this or the keyword super.
So you cannot override a static method because it does not belong to an instance. So, the keywords this and super are not avaliable and you cannot use virtual method invocation. And if you cannot use virtual method invocation then the final keyword is of no use.
I like to think that the compiler sees method declarations like this:
public class SomeClass{
// public static classMethod() becomes
public static [final] void classMethod(){
//...
}
// and public void instanceMethod() becomes
public void instanceMethod(SomeClass this, Object super){
//....
}
}
public class SomeOtherClass extends SomeClass{
// overrides
#Override
public void instanceMethod(SomeOtherClass this, SomeClass super){
//...
}
}
And you call SomeClass instance = new SomeOtherClass().instanceMethod(); then its called the instanceMethod() of SomeOtherClass.
So the compiler does not need to copy method bodys and just pass the reference to the current object in the thread. So, when you use virtual method invocation, in fact you are calling the instanceMethod with a reference to the current object (this) and the body method of the current class is what is called.
What does public static void mean in Java?
I'm in the process of learning. In all the examples in the book I'm working from public static void comes before any method that is being used or created. What does this mean?
It's three completely different things:
public means that the method is visible and can be called from other objects of other types. Other alternatives are private, protected, package and package-private. See here for more details.
static means that the method is associated with the class, not a specific instance (object) of that class. This means that you can call a static method without creating an object of the class.
void means that the method has no return value. If the method returned an int you would write int instead of void.
The combination of all three of these is most commonly seen on the main method which most tutorials will include.
The three words have orthogonal meanings.
public means that the method will be visible from classes in other packages.
static means that the method is not attached to a specific instance, and it has no "this". It is more or less a function.
void is the return type. It means "this method returns nothing".
The public keyword is an access specifier, which allows the programmer to control the visibility of class members. When a class member is preceded by public, then that member may be accessed by code outside the class in which it is declared. (The opposite of public is private, which prevents a member from being used by code defined outside of its class.)
In this case, main( ) must be declared as public, since it must be called by code outside of its class when the program is started.
The keyword static allows main( ) to be called without having to instantiate a particular instance of the class. This is necessary since main( ) is called by the Java interpreter before any objects are made.
The keyword void simply tells the compiler that main( ) does not return a value. As you will see, methods may also return values.
It means that:
public - it can be called from anywhere
static - it doesn't have any object state, so you can call it without instantiating an object
void - it doesn't return anything
You'd think that the lack of a return means it isn't doing much, but it might be saving things in the database, for example.
It means three things.
First public means that any other object can access it.
static means that the class in which it resides doesn't have to be instantiated first before the function can be called.
void means that the function does not return a value.
Since you are just learning, don't worry about the first two too much until you learn about classes, and the third won't matter much until you start writing functions (other than main that is).
Best piece of advice I got when learning to program, and which I pass along to you, is don't worry about the little details you don't understand right away. Get a broad overview of the fundamentals, then go back and worry about the details. The reason is that you have to use some things (like public static void) in your first programs which can't really be explained well without teaching you about a bunch of other stuff first. So, for the moment, just accept that that's the way it's done, and move on. You will understand them shortly.
Considering the typical top-level class. Only public and no modifier access modifiers may be used at the top level so you'll either see public or you won't see any access modifier at all.
`static`` is used because you may not have a need to create an actual object at the top level
(but sometimes you will want to so you may not always see/use static. There are other reasons why you wouldn't include static too but this is the typical one at the top level.)
void is used because usually you're not going to be returning a value from the top level (class). (sometimes you'll want to return a value other than NULL so void may not always be used either especially in the case when you have declared, initialized an object at the top level that you are assigning some value to).
Disclaimer:
I'm a newbie myself so if this answer is wrong in any way please don't hang me. By day I'm a tech recruiter not a developer; coding is my hobby. Also, I'm always open to constructive criticism and love to learn so please feel free to point out any errors.
Public - means that the class (program) is available for use by any other class.
Static - creates a class. Can also be applied to variables and methods,making them class methods/variables instead of just local to a particular instance of the class.
Void - this means that no product is returned when the class completes processing. Compare this with helper classes that provide a return value to the main class,these operate like functions; these do not have void in the declaration.
public means you can access the class from anywhere in the class/object or outside of the package or class
static means constant in which block of statement used only 1 time
void means no return type
static means that the method is associated with the class, not a specific instance (object) of that class. This means that you can call a static method without creating an object of the class.
Because of use of a static keyword main() is your first method to be invoked..
static doesn't need to any object to instance...
so,main( ) is called by the Java interpreter before any objects are made.