Related
I'm getting a NoSuchMethodError error when running my Java program. What's wrong and how do I fix it?
Without any more information it is difficult to pinpoint the problem, but the root cause is that you most likely have compiled a class against a different version of the class that is missing a method, than the one you are using when running it.
Look at the stack trace ... If the exception appears when calling a method on an object in a library, you are most likely using separate versions of the library when compiling and running. Make sure you have the right version both places.
If the exception appears when calling a method on objects instantiated by classes you made, then your build process seems to be faulty. Make sure the class files that you are actually running are updated when you compile.
I was having your problem, and this is how I fixed it. The following steps are a working way to add a library. I had done the first two steps right, but I hadn't done the last one by dragging the ".jar" file direct from the file system into the "lib" folder on my eclipse project. Additionally, I had to remove the previous version of the library from both the build path and the "lib" folder.
Step 1 - Add .jar to build path
Step 2 - Associate sources and javadocs (optional)
Step 3 - Actually drag .jar file into "lib" folder (not optional)
Note that in the case of reflection, you get an NoSuchMethodException, while with non-reflective code, you get NoSuchMethodError. I tend to go looking in very different places when confronted with one versus the other.
If you have access to change the JVM parameters, adding verbose output should allow you to see what classes are being loaded from which JAR files.
java -verbose:class <other args>
When your program is run, the JVM should dump to standard out information such as:
...
[Loaded junit.framework.Assert from file:/C:/Program%20Files/junit3.8.2/junit.jar]
...
If using Maven or another framework, and you get this error almost randomly, try a clean install like...
clean install
This is especially likely to work if you wrote the object and you know it has the method.
This is usually caused when using a build system like Apache Ant that only compiles java files when the java file is newer than the class file. If a method signature changes and classes were using the old version things may not be compiled correctly. The usual fix is to do a full rebuild (usually "ant clean" then "ant").
Sometimes this can also be caused when compiling against one version of a library but running against a different version.
I had the same error:
Exception in thread "main" java.lang.NoSuchMethodError: com.fasterxml.jackson.core.JsonGenerator.writeStartObject(Ljava/lang/Object;)V
at com.fasterxml.jackson.databind.ser.BeanSerializer.serialize(BeanSerializer.java:151)
at com.fasterxml.jackson.databind.ser.DefaultSerializerProvider.serializeValue(DefaultSerializerProvider.java:292)
at com.fasterxml.jackson.databind.ObjectMapper._configAndWriteValue(ObjectMapper.java:3681)
at com.fasterxml.jackson.databind.ObjectMapper.writeValueAsString(ObjectMapper.java:3057)
To solve it I checked, firstly, Module Dependency Diagram (click in your POM the combination -> Ctrl+Alt+Shift+U or right click in your POM -> Maven -> Show dependencies) to understand where exactly was the conflict between libraries (Intelij IDEA). In my particular case, I had different versions of Jackson dependencies.
1) So, I added directly in my POM of the project explicitly the highest version - 2.8.7 of these two.
In properties:
<jackson.version>2.8.7</jackson.version>
And as dependency:
<dependency>
<groupId>com.fasterxml.jackson.core</groupId>
<artifactId>jackson-databind</artifactId>
<version>${jackson.version}</version>
</dependency>
2) But also it can be solved using Dependency Exclusions.
By the same principle as below in example:
<dependency>
<groupId>group-a</groupId>
<artifactId>artifact-a</artifactId>
<version>1.0</version>
<exclusions>
<exclusion>
<groupId>com.fasterxml.jackson.core</groupId>
<artifactId>jackson-databind</artifactId>
</exclusion>
</exclusions>
</dependency>
Dependency with unwanted version will be excluded from your project.
This can also be the result of using reflection. If you have code that reflects on a class and extracts a method by name (eg: with Class.getDeclaredMethod("someMethodName", .....)) then any time that method name changes, such as during a refactor, you will need to remember to update the parameters to the reflection method to match the new method signature, or the getDeclaredMethod call will throw a NoSuchMethodException.
If this is the reason, then the stack trace should show the point that the reflection method is invoked, and you'll just need to update the parameters to match the actual method signature.
In my experience, this comes up occasionally when unit testing private methods/fields, and using a TestUtilities class to extract fields for test verification. (Generally with legacy code that wasn't designed with unit testing in mind.)
If you are writing a webapp, ensure that you don't have conflicting versions of a jar in your container's global library directory and also in your app. You may not necessarily know which jar is being used by the classloader.
e.g.
tomcat/common/lib
mywebapp/WEB-INF/lib
For me it happened because I changed argument type in function, from Object a, to String a. I could resolve it with clean and build again
In my case I had a multi module project and scenario was like com.xyz.TestClass was in module A and as well as in module B and module A was dependent on module B. So while creating a assembly jar I think only one version of class was retained if that doesn't have the invoked method then I was getting NoSuchMethodError runtime exception, but compilation was fine.
Related : https://reflectoring.io/nosuchmethod/
Why anybody doesn't mention dependency conflicts? This common problem can be related to included dependency jars with different versions.
Detailed explanation and solution: https://dzone.com/articles/solving-dependency-conflicts-in-maven
Short answer;
Add this maven dependency;
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-enforcer-plugin</artifactId>
<version>3.0.0-M3</version>
<configuration>
<rules>
<dependencyConvergence />
</rules>
</configuration>
</plugin>
Then run this command;
mvn enforcer:enforce
Maybe this is the cause your the issue you faced.
It means the respective method is not present in the class:
If you are using jar then decompile and check if the respective version of jar have proper class.
Check if you have compiled proper class from your source.
I have just solved this error by restarting my Eclipse and run the applcation.
The reason for my case may because I replace my source files without closing my project or Eclipse.
Which caused different version of classes I was using.
Try this way: remove all .class files under your project directories (and, of course, all subdirectories). Rebuild.
Sometimes mvn clean (if you are using maven) does not clean .class files manually created by javac. And those old files contain old signatures, leading to NoSuchMethodError.
Just adding to existing answers. I was facing this issue with tomcat in eclipse. I had changed one class and did following steps,
Cleaned and built the project in eclpise
mvn clean install
Restarted tomcat
Still I was facing same error. Then I cleaned tomcat, cleaned tomcat working directory and restarted server and my issue is gone. Hope this helps someone
These problems are caused by the use of the same object at the same two classes.
Objects used does not contain new method has been added that the new object class contains.
ex:
filenotnull=/DayMoreConfig.conf
16-07-2015 05:02:10:ussdgw-1: Open TCP/IP connection to SMSC: 10.149.96.66 at 2775
16-07-2015 05:02:10:ussdgw-1: Bind request: (bindreq: (pdu: 0 9 0 [1]) 900 900 GEN 52 (addrrang: 0 0 2000) )
Exception in thread "main" java.lang.NoSuchMethodError: gateway.smpp.PDUEventListener.<init>(Lgateway/smpp/USSDClient;)V
at gateway.smpp.USSDClient.bind(USSDClient.java:139)
at gateway.USSDGW.initSmppConnection(USSDGW.java:274)
at gateway.USSDGW.<init>(USSDGW.java:184)
at com.vinaphone.app.ttn.USSDDayMore.main(USSDDayMore.java:40)
-bash-3.00$
These problems are caused by the concomitant 02 similar class (1 in src, 1 in jar file here is gateway.jar)
To answer the original question. According to java docs here:
"NoSuchMethodError" Thrown if an application tries to call a specified method of a class (either static or instance), and that class no longer has a definition of that method.
Normally, this error is caught by the compiler; this error can only occur at run time if the definition of a class has incompatibly changed.
If it happens in the run time, check the class containing the method is in class path.
Check if you have added new version of JAR and the method is compatible.
I fixed this problem in Eclipse by renaming a Junit test file.
In my Eclipse work space I have an App project and a Test project.
The Test project has the App project as a required project on the build path.
Started getting the NoSuchMethodError.
Then I realized the class in the Test project had the same name as the class in the App project.
App/
src/
com.example/
Projection.java
Test/
src/
com.example/
Projection.java
After renaming the Test to the correct name "ProjectionTest.java" the exception went away.
NoSuchMethodError : I have spend couple of hours fixing this issue, finally fixed it by just renaming package name , clean and build ... Try clean build first if it doesn't works try renaming the class name or package name and clean build...it should be fixed. Good luck.
I ran into a similar problem when I was changing method signatures in my application.
Cleaning and rebuilding my project resolved the "NoSuchMethodError".
Above answer explains very well ..just to add one thing
If you are using using eclipse use ctrl+shift+T and enter package structure of class (e.g. : gateway.smpp.PDUEventListener ), you will find all jars/projects where it's present. Remove unnecessary jars from classpath or add above in class path. Now it will pick up correct one.
I ran into similar issue.
Caused by: java.lang.NoSuchMethodError: com.abc.Employee.getEmpId()I
Finally I identified the root cause was changing the data type of variable.
Employee.java --> Contains the variable (EmpId) whose Data Type has been changed from int to String.
ReportGeneration.java --> Retrieves the value using the getter, getEmpId().
We are supposed to rebundle the jar by including only the modified classes. As there was no change in ReportGeneration.java I was only including the Employee.class in Jar file. I had to include the ReportGeneration.class file in the jar to solve the issue.
I've had the same problem. This is also caused when there is an ambiguity in classes. My program was trying to invoke a method which was present in two JAR files present in the same location / class path. Delete one JAR file or execute your code such that only one JAR file is used. Check that you are not using same JAR or different versions of the same JAR that contain the same class.
DISP_E_EXCEPTION [step] [] [Z-JAVA-105 Java exception java.lang.NoSuchMethodError(com.example.yourmethod)]
Most of the times java.lang.NoSuchMethodError is caught be compiler but sometimes it can occur at runtime. If this error occurs at runtime then the only reason could be the change in the class structure that made it incompatible.
Best Explanation: https://www.journaldev.com/14538/java-lang-nosuchmethoderror
I've encountered this error too.
My problem was that I've changed a method's signature, something like
void invest(Currency money){...}
into
void invest(Euro money){...}
This method was invoked from a context similar to
public static void main(String args[]) {
Bank myBank = new Bank();
Euro capital = new Euro();
myBank.invest(capital);
}
The compiler was silent with regard to warnings/ errors, as capital is both Currency as well as Euro.
The problem appeared due to the fact that I only compiled the class in which the method was defined - Bank, but not the class from which the method is being called from, which contains the main() method.
This issue is not something you might encounter too often, as most frequently the project is rebuilt mannually or a Build action is triggered automatically, instead of just compiling the one modified class.
My usecase was that I generated a .jar file which was to be used as a hotfix, that did not contain the App.class as this was not modified. It made sense to me not to include it as I kept the initial argument's base class trough inheritance.
The thing is, when you compile a class, the resulting bytecode is kind of static, in other words, it's a hard-reference.
The original disassembled bytecode (generated with the javap tool) looks like this:
#7 = Methodref #2.#22 // Bank.invest:(LCurrency;)V
After the ClassLoader loads the new compiled Bank.class, it will not find such a method, it appears as if it was removed and not changed, thus the named error.
Hope this helps.
The problem in my case was having two versions of the same library in the build path. The older version of the library didn't have the function, and newer one did.
I had a similar problem with my Gradle Project using Intelij.
I solved it by deleting the .gradle (see screenshot below) Package and rebuilding the Project.
.gradle Package
I had faced the same issue. I changed the return type of one method and ran the test code of that one class. That is when I faced this NoSuchMethodError. As a solution, I ran the maven builds on the entire repository once, before running the test code again. The issue got resolved in the next single test run.
One such instance where this error occurs:
I happened to make a silly mistake of accessing private static member variables in a non static method. Changing the method to static solved the problem.
Does anyone have any idea why something that used to work before all of a sudden started giving this error? please help
java.lang.NoSuchMethodError: org.apache.hadoop.mapred.Counters.findCounter(Ljava/lang/Enum;)Lorg/apache/hadoop/mapreduce/Counter;
at edu.umn.cs.spatialHadoop.operations.Sampler.sampleMapReduceWithRatio(Sampler.java:214)
at edu.umn.cs.spatialHadoop.operations.Sampler.sample(Sampler.java:543)
at edu.umn.cs.spatialHadoop.operations.Repartition.packInRectangles(Repartition.java:494)
at edu.umn.cs.spatialHadoop.operations.Repartition.packInRectangles(Repartition.java:463)
at edu.umn.cs.spatialHadoop.operations.Repartition.repartitionLocal(Repartition.java:590)
This has been working earlier but suddenly started giving this error. I am using hadoop version 1.2.1
Counter class is included in hadoop-mapreduce-client-core.jar. You must have downgraded it somehow.
If you are using a build tool (maven, gradle...), check your dependencies and make sure they haven't changed. In case of doubt, just apply the latest version.
Else, go to your hadoop-mapreduce-client-core.jar and either check if the method is inside or just get a newer version to replace it in your project.
from org/apache/hadoop/mapreduce/Counter I guess that the hadoop-mapreduce-client-core.jar is missing
This is because of latest compiled class and dependent jar available in the application are of different version. For example: Let Class A compiled with dependent jar X in place then later same Class A compiled in different environment withe dependent jar X1 which consist new method called Y in that. now the class will be compiled because new method Y is available in jar X1 when the same Class A is used in the environment with jar X in place then it leads to the NoSuchMethod Exception when trying to load the class in the class memory. Classloader does the verification of the dependent classes before loading the class in the class memory before invoking real exceution.
Everything were available all jar files and all. After an exhausting work thinking of whats wrong, i decided to reload everything afresh (i.e reload the hadoop files). Thanks to you guys for helping :)
I have a project with different classes and packages as dependencies. Note that everything writte below occurs in one project.
I have a class that at some point runs the code getDiagramPanel().setRelationsPaintOrder(new Comparator() {.
getDiagramPanel() calls the method from DjtSheet.class, which is located in a dependency .jar-file. This method returns the DjtDiagramPanel object. I also have a DjtDiagramPanel.java file, which should override the one from the package and contains the method setRelationsPaintOrder().
In Java 7, this works fine. It correctly calls the method from the dependency, which returns the object in the format of the class which overrides the panelclass from the dependency package.
In Java 6 however, the panelclass from the dependency package is returned instead of the one from my project.
java.lang.NoSuchMethodError:
com.dlsc.djt.gantt.DjtDiagramPanel.setRelationsPaintOrder(Ljava/util/Comparator;)V
Note that this message occurs at runtime! Compiling the project gives no errors.
How can I solve this?
This problem definitely means that you have a problem in class path. I guess that the problem is that class DjtDiagramPanel is duplicate and you have 2 different veraions: one that has method setRelationsPaintOrder and second that does not have. Apparently you compile code against the "good" version and run against the "bad" one.
When this happens you can probably change the order of class loading by playing with order of dependencies in project properties of eclipse, but it will just fail later (on production). So, you should find what is the root cause of the duplication.
First find these 2 versions of the same class. Then find how the bad version arrived to your classpath. It typically happes because of 3rd party dependencies. If you are using maven you can use dependency plugin to find the root cause and disable it using tag "exclusion".
I'm getting:
NoSuchMethodError: com.foo.SomeService.doSmth()Z
Am I understanding correctly that this 'Z' means that return type of doSmth() method is boolean? If true, then that kind of method really does not exist because this method returns some Collection. But on the other hand if I call this method, I'm not assigning its return value to any variable. I just call this method like this:
service.doSmth();
Any ideas why this error occurs? All necessary JAR files exist and all other methods from this class seems to exist.
Looks like method exists in classpath during compilation, but not during running of your application.
I don't think return type is a problem. If it was, it wouldn't compile. Compiler throws error when method call is ambiguous, and it is when two methods differ only by return type.
Normally, this error is caught by the compiler; this error can only occur at run time if the definition of a class has incompatibly changed.
In short - a class/jar file at runtime is not the same that you used at compile time.
This is probably a difference between your compile-time classpath and you run-time classpath.
Here is what seems to be going on:
The code is compiled with a class path that defines the doSmth() method returning a boolean. The byte-code refers to the doSmth()Z method.
At runtime, the doSmth()Z method isn't found. A method returning a Collection is found instead.
To correct this problem, check your (compile time) classpath.
The current reply just tell you why is failing. Usually is even nicer to know how to fix problems. As it is mentioned, the problem usually is that you built your program but when running or exporting it, the library is not included. So the solution is...
If you are running, check the the run configuration
Select Run tab -> Run configurations -> Select the configuration you are running -> Check the Classpath tab -> Ensure the libraries you need are there
If you are exporting (for example a war file), follow this
Select project -> Select properties -> Select Deployment Assembly -> Press Add -> Select Java Build Path Entries -> Select the libraries you want to be included in your exported file (for example a war file)
In both cases, ensure the library which you are referencing in included.
Other frequent problems for this error are not the right type of parameters or visibility but then, the compiler will detect the error before running. In this case, just check the documentation to match the function and package visibility, and ensure that the library is found in Java Build Path in your project properties.
Maybe still can help somebody, but this exception can happen also when you have on the classpath two classes in different jar files that have the same exact signature but they haven't the same public methods.
For example:
On file mylibrary1.jar you have class com.mypackage.mysubpackage.MyClass with method doSmth()
On file mylibrary2.jar you have class com.mypackage.mysubpackage.MyClass without method doSmth()
When searching the class, the classloader may find first mylibrary2.jar depending on the path precedence but can't find the method on that class.
Be sure you don't have the same package + class on two different files.
I noticed this problem occurring while testing some experimental changes in multiple linked projects, after updating them from SVN in Eclipse.
Specifically, I updated all projects from SVN, and reverted the .classpath file rather than edit it manually to keep things simple.
Then I re-added the linked projects to the path, but forgot to remove the related jars. This was how the problem occurred for me.
So apparently the run time used the jar file while the compiler used the project files.
Another way this can happen and is difficult to find:
If a signature of a method in an external jar changes in a way that there is no error found in the IDE because it's still compatible with how you call it the class might not be re-compiled.
If your build checks the files for changes and only then recompiles them, the class might not be recompiled during the build process.
So when you run it this might lead to that problem. Although you have the new jar, your own code expects still the old one but does never complain.
To make it harder it depends on the jvm if it can handle such cases. So in the worst case it runs on the test server but not on the live machine.
I'm packaging a Java library as a JAR, and it's throwing many java.lang.IncompatibleClassChangeErrors when I try to invoke methods from it. These errors seem to appear at random. What kinds of problems could be causing this error?
This means that you have made some incompatible binary changes to the library without recompiling the client code. Java Language Specification §13 details all such changes, most prominently, changing non-static non-private fields/methods to be static or vice versa.
Recompile the client code against the new library, and you should be good to go.
UPDATE: If you publish a public library, you should avoid making incompatible binary changes as much as possible to preserve what's known as "binary backward compatibility". Updating dependency jars alone ideally shouldn't break the application or the build. If you do have to break binary backward compatibility, it's recommended to increase the major version number (e.g. from 1.x.y to 2.0.0) before releasing the change.
Your newly packaged library is not backward binary compatible (BC) with old version. For this reason some of the library clients that are not recompiled may throw the exception.
This is a complete list of changes in Java library API that may cause clients built with an old version of the library to throw java.lang.IncompatibleClassChangeError if they run on a new one (i.e. breaking BC):
Non-final field become static,
Non-constant field become non-static,
Class become interface,
Interface become class,
if you add a new field to class/interface (or add new super-class/super-interface) then a static field from a super-interface of a client class C may hide an added field (with the same name) inherited from the super-class of C (very rare case).
Note: There are many other exceptions caused by other incompatible changes: NoSuchFieldError, NoSuchMethodError, IllegalAccessError, InstantiationError, VerifyError, NoClassDefFoundError and AbstractMethodError.
The better paper about BC is "Evolving Java-based APIs 2: Achieving API Binary Compatibility" written by Jim des Rivières.
There are also some automatic tools to detect such changes:
japi-compliance-checker
clirr
japitools
sigtest
japi-checker
Usage of japi-compliance-checker for your library:
japi-compliance-checker OLD.jar NEW.jar
Usage of clirr tool:
java -jar clirr-core-0.6-uber.jar -o OLD.jar -n NEW.jar
Good luck!
While these answers are all correct, resolving the problem is often more difficult. It's generally the result of two mildly different versions of the same dependency on the classpath, and is almost always caused by either a different superclass than was originally compiled against being on the classpath or some import of the transitive closure being different, but generally at class instantiation and constructor invocation. (After successful class loading and ctor invocation, you'll get NoSuchMethodException or whatnot.)
If the behavior appears random, it's likely the result of a multithreaded program classloading different transitive dependencies based on what code got hit first.
To resolve these, try launching the VM with -verbose as an argument, then look at the classes that were being loaded when the exception occurs. You should see some surprising information. For instance, having multiple copies of the same dependency and versions you never expected or would have accepted if you knew they were being included.
Resolving duplicate jars with Maven is best done with a combination of the maven-dependency-plugin and maven-enforcer-plugin under Maven (or SBT's Dependency Graph Plugin, then adding those jars to a section of your top-level POM or as imported dependency elements in SBT (to remove those dependencies).
Good luck!
I have also discovered that, when using JNI, invoking a Java method from C++, if you pass parameters to the invoked Java method in the wrong order, you will get this error when you attempt to use the parameters inside the called method (because they won't be the right type). I was initially taken aback that JNI does not do this checking for you as part of the class signature checking when you invoke the method, but I assume they don't do this kind of checking because you may be passing polymorphic parameters and they have to assume you know what you are doing.
Example C++ JNI Code:
void invokeFooDoSomething() {
jobject javaFred = FredFactory::getFred(); // Get a Fred jobject
jobject javaFoo = FooFactory::getFoo(); // Get a Foo jobject
jobject javaBar = FooFactory::getBar(); // Get a Bar jobject
jmethodID methodID = getDoSomethingMethodId() // Get the JNI Method ID
jniEnv->CallVoidMethod(javaFoo,
methodID,
javaFred, // Woops! I switched the Fred and Bar parameters!
javaBar);
// << Insert error handling code here to discover the JNI Exception >>
// ... This is where the IncompatibleClassChangeError will show up.
}
Example Java Code:
class Bar { ... }
class Fred {
public int size() { ... }
}
class Foo {
public void doSomething(Fred aFred, Bar anotherObject) {
if (name.size() > 0) { // Will throw a cryptic java.lang.IncompatibleClassChangeError
// Do some stuff...
}
}
}
I had the same issue, and later I figured out that I am running the application on Java version 1.4 while the application is compiled on version 6.
Actually, the reason was of having a duplicate library, one is located within the classpath and the other one is included inside a jar file that is located within the classpath.
In my case the error appeared when I added the com.nimbusds library in my application deployed on Websphere 8.5.
The below exception occurred:
Caused by: java.lang.IncompatibleClassChangeError: org.objectweb.asm.AnnotationVisitor
The solution was to exclude the asm jar from the library:
<dependency>
<groupId>com.nimbusds</groupId>
<artifactId>nimbus-jose-jwt</artifactId>
<version>5.1</version>
<exclusions>
<exclusion>
<artifactId>asm</artifactId>
<groupId>org.ow2.asm</groupId>
</exclusion>
</exclusions>
</dependency>
Another situation where this error can appear is with Emma Code Coverage.
This happens when assigning an Object to an interface. I guess this has something to do with the Object being instrumented and not binary compatible anymore.
http://sourceforge.net/tracker/?func=detail&aid=3178921&group_id=177969&atid=883351
Fortunately this problem doesn't happen with Cobertura, so I've added cobertura-maven-plugin in my reporting plugins of my pom.xml
I've faced this issue while undeploying and redeploying a war with glassfish. My class structure was like this,
public interface A{
}
public class AImpl implements A{
}
and it was changed to
public abstract class A{
}
public class AImpl extends A{
}
After stopping and restarting the domain, it worked out fine.
I was using glassfish 3.1.43
All of the above - for whatever reason I was doing some big refactor and starting to get this. I renamed the package my interface was in and that cleared it. Hope that helps.
I have a web application that deploys perfectly fine on my local machine's tomcat(8.0.20). However, when I put it into the qa environment (tomcat - 8.0.20), it kept on giving me the IncompatibleClassChangeError and it was complaining that I was extending on an interface. This interface was changed to an abstract class. And I compiled the parent and child classes and still I kept on getting the same issue. Finally, I wanted to debug, so, I changed the version on the parent to x.0.1-SNAPSHOT and then compiled everything and now it is working. If someone is still hitting the problem after following the answers given here, please make sure the versions in your pom.xml are also correct. Change the versions to see if that works. If so, then fix the version problem.
My answer, I believe, will be Intellij specific.
I had rebuilt clean, even going as far as to manually delete the "out" and "target" dirs. Intellij has a "invalidate caches and restart", which sometimes clears odd errors. This time it didn't work. The dependency versions all looked correct in the project settings->modules menu.
The final answer was to manually delete my problem dependency from my local maven repo. An old version of bouncycastle was the culprit(I knew I had just changed versions and that would be the problem) and although the old version showed up no where in what was being built, it solved my problem. I was using intellij version 14 and then upgraded to 15 during this process.
In my case, I ran into this error this way. pom.xml of my project defined two dependencies A and B. And both A and B defined dependency on same artifact (call it C) but different versions of it (C.1 and C.2). When this happens, for each class in C maven can only select one version of the class from the two versions (while building an uber-jar). It will select the "nearest" version based on its dependency mediation rules and will output a warning "We have a duplicate class..." If a method/class signature changes between the versions, it can cause a java.lang.IncompatibleClassChangeError exception if the incorrect version is used at runtime.
Advanced: If A must use v1 of C and B must use v2 of C, then we must relocate C in A and B's poms to avoid class conflict (we have a duplicate class warning) when building the final project that depends on both A and B.
An additional cause of this issue, is if you have Instant Run enabled for Android Studio.
The fix
If you find you start getting this error, turn off Instant Run.
Android Studio main settings
Build, Execution, Deployment
Instant Run
Untick "Enable instant run..."
Why
Instant Run modifies a large number of things during development, to make it quicker to provide updates to your running App. Hence instant run. When it works, it is really useful. However, when an issue such as this strikes, the best thing to do is to turn off Instant Run until the next version of Android Studio releases.
Please check if your code doesnt consist of two module projects that have the same classes names and packages definition. For example this could happen if someone uses copy-paste to create new implementation of interface based on previous implementation.
If this is a record of possible occurences of this error then:
I just got this error on WAS (8.5.0.1), during the CXF (2.6.0) loading of the spring (3.1.1_release) configuration where a BeanInstantiationException rolled up a CXF ExtensionException, rolling up a IncompatibleClassChangeError. The following snippet shows the gist of the stack trace:
Caused by: org.springframework.beans.BeanInstantiationException: Could not instantiate bean class [org.apache.cxf.bus.spring.SpringBus]: Constructor threw exception; nested exception is org.apache.cxf.bus.extension.ExtensionException
at org.springframework.beans.BeanUtils.instantiateClass(BeanUtils.java:162)
at org.springframework.beans.factory.support.SimpleInstantiationStrategy.instantiate(SimpleInstantiationStrategy.java:76)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.instantiateBean(AbstractAutowireCapableBeanFactory.java:990)
... 116 more
Caused by: org.apache.cxf.bus.extension.ExtensionException
at org.apache.cxf.bus.extension.Extension.tryClass(Extension.java:167)
at org.apache.cxf.bus.extension.Extension.getClassObject(Extension.java:179)
at org.apache.cxf.bus.extension.ExtensionManagerImpl.activateAllByType(ExtensionManagerImpl.java:138)
at org.apache.cxf.bus.extension.ExtensionManagerBus.<init>(ExtensionManagerBus.java:131)
[etc...]
at org.springframework.beans.BeanUtils.instantiateClass(BeanUtils.java:147)
... 118 more
Caused by: java.lang.IncompatibleClassChangeError:
org.apache.neethi.AssertionBuilderFactory
at java.lang.ClassLoader.defineClassImpl(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:284)
[etc...]
at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java:586)
at java.lang.ClassLoader.loadClass(ClassLoader.java:658)
at org.apache.cxf.bus.extension.Extension.tryClass(Extension.java:163)
... 128 more
In this case, the solution was to change the classpath order of the module in my war file. That is, open up the war application in the WAS console under and select the client module(s). In the module configuration, set the class-loading to be "parent last".
This is found in the WAS console:
Applicatoins -> Application Types -> WebSphere Enterprise Applications
Click link representing your application (war)
Click "Manage Modules" under "Modules" section
Click link for the underlying module(s)
Change "Class loader order" to be "(parent last)".
Documenting another scenario after burning way too much time.
Make sure you don't have a dependency jar that has a class with an EJB annotation on it.
We had a common jar file that had an #local annotation. That class was later moved out of that common project and into our main ejb jar project. Our ejb jar and our common jar are both bundled within an ear. The version of our common jar dependency was not updated. Thus 2 classes trying to be something with incompatible changes.
For some reason the same exception is also thrown when using JNI and passing the jclass argument instead of the jobject when calling a Call*Method().
This is similar to the answer from Ogre Psalm33.
void example(JNIEnv *env, jobject inJavaList) {
jclass class_List = env->FindClass("java/util/List");
jmethodID method_size = env->GetMethodID(class_List, "size", "()I");
long size = env->CallIntMethod(class_List, method_size); // should be passing 'inJavaList' instead of 'class_List'
std::cout << "LIST SIZE " << size << std::endl;
}
I know it is a bit late to answer this question 5 years after being asked but this is one of the top hits when searching for java.lang.IncompatibleClassChangeError so I wanted to document this special case.
Adding my 2 cents .If you are using scala and sbt and scala-logging as dependency ;then this can happen because scala-logging's earlier version had the name scala-logging-api.So;essentially the dependency resolutions do not happen because of different names leading to runtime errors while launching the scala application.
I got this error because I had an abstract base class which promised that it implements a certain interface, but I had forgotten to add the implementations of the interface methods, and then I created a non-abstract (concrete) bytecode-generated class which extended the abstract class, without providing implementations for those methods, either.
When I tried to create an instance the bytecode-generated class, the JVM complained with java.lang.IncompatibleClassChangeError.
Luckily, the exception has a "message" member which provides more detailed information as to what went wrong. In my case the message clearly said that the particular class was supposed to implement the particular interface, but it did not actually implement it.
If you came from android development. Then give a try of rebuild option might be fix for you.
In my case:
I have a project containing a few modules, including app, test, integrationTest
I created OneElementCache in app module.
Then, I created a file Cache in test module, the file contains some helpers for creating OneElementCache in tests.
Until now, everything works perfectly (both test and integrationTest passes).
After that, I created a file Cache in app module.
Got while running integrationTest:
Caused by: java.lang.IncompatibleClassChangeError:
class app.cache.CacheImpl can not implement app.cache.Cache, because it is not an interface (app.cache.Cache is in unnamed module of loader 'app')
The reason was a conflict in naming in different modules (app/test). Changing the filename in test did the job.