I have a JPanel sitting inside the center position of a BorderLayout of a JFrame. How can I swap out the current JPanel for a new one?
Did you try something on the lines of:
void swapCenterPanel(JFrame frame, JPanel oldPanel, JPanel newPanel) {
frame.getContentPane().remove(oldPanel);
frame.getContentPane().add(newPanel, BorderLayout.CENTER);
}
Use a Card Layout which manages this for you.
I got this to work with no z index issues through trial and error.
lets call x the JPanel which has the BorderLayout
lets call y the Component which is currently occupying BorderLayout.Center
lets call z the JPanel to replace in the center position.
x.remove(y);
x.add(z);
x.repaint();
x.revalidate();
I found if I tried to remove the existing JPanel through the LayoutManager itself, it doesn't work. Instead if you use the remove method of the JPanel the java doc says it notifies the layouts removeLayoutComponent method and seems to do the trick.
Just add the component to center and revalidate() the parent container
container.add(BorderLayout.CENTER, newPanel);
container.revalidate();
Related
To put it simple, there's a simple java swing app that consists of JFrame with some components in it. One of the components is a JPanel that is meant to be replaced by another JPanel on user action.
So, what's the correct way of doing such a thing? I've tried
panel = new CustomJPanelWithComponentsOnIt();
parentFrameJPanelBelongsTo.pack();
but this won't work. What would you suggest?
Your use case, seems perfect for CardLayout.
In card layout you can add multiple panels in the same place, but then show or hide, one panel at a time.
1) Setting the first Panel:
JFrame frame=new JFrame();
frame.getContentPane().add(new JPanel());
2)Replacing the panel:
frame.getContentPane().removeAll();
frame.getContentPane().add(new JPanel());
Also notice that you must do this in the Event's Thread, to ensure this use the SwingUtilities.invokeLater or the SwingWorker
frame.setContentPane(newContents());
frame.revalidate(); // frame.pack() if you want to resize.
Remember, Java use 'copy reference by value' argument passing. So changing a variable wont change copies of the reference passed to other methods.
Also note JFrame is very confusing in the name of usability. Adding a component or setting a layout (usually) performs the operation on the content pane. Oddly enough, getting the layout really does give you the frame's layout manager.
Hope this piece of code give you an idea of changing jPanels inside a JFrame.
public class PanelTest extends JFrame {
Container contentPane;
public PanelTest() {
super("Changing JPanel inside a JFrame");
contentPane=getContentPane();
}
public void createChangePanel() {
contentPane.removeAll();
JPanel newPanel=new JPanel();
contentPane.add(newPanel);
System.out.println("new panel created");//for debugging purposes
validate();
setVisible(true);
}
}
On the user action:
// you have to do something along the lines of
myJFrame.getContentPane().removeAll()
myJFrame.getContentPane().invalidate()
myJFrame.getContentPane().add(newContentPanel)
myJFrame.getContentPane().revalidate()
Then you can resize your wndow as needed.
Game game = new Game();
getContentPane().removeAll();
setContentPane(game);
getContentPane().revalidate(); //IMPORTANT
getContentPane().repaint(); //IMPORTANT
It all depends on how its going to be used. If you will want to switch back and forth between these two panels then use a CardLayout. If you are only switching from the first to the second once and (and not going back) then I would use telcontars suggestion and just replace it. Though if the JPanel isn't the only thing in your frame I would use
remove(java.awt.Component) instead of removeAll.
If you are somewhere in between these two cases its basically a time-space tradeoff. The CardLayout will save you time but take up more memory by having to keep this whole other panel in memory at all times. But if you just replace the panel when needed and construct it on demand, you don't have to keep that meory around but it takes more time to switch.
Also you can try a JTabbedPane to use tabs instead (its even easier than CardLayout because it handles the showing/hiding automitically)
The other individuals answered the question. I want to suggest you use a JTabbedPane instead of replacing content. As a general rule, it is bad to have visual elements of your application disappear or be replaced by other content. Certainly there are exceptions to every rule, and only you and your user community can decide the best approach.
Problem: My component does not appear after I have added it to the container.
You need to invoke revalidate and repaint after adding a component before it will show up in your container.
Source: http://docs.oracle.com/javase/tutorial/uiswing/layout/problems.html
I was having exactly the same problem!! Increadible!! The solution I found was:
Adding all the components (JPanels) to the container;
Using the setVisible(false) method to all of them;
On user action, setting setVisible(true) to the panel I wanted to
show.
// Hiding all components (JPanels) added to a container (ex: another JPanel)
for (Component component : this.container.getComponents()) {
component.setVisible(false);
}
// Showing only the selected JPanel, the one user wants to see
panel.setVisible(true);
No revalidate(), no validate(), no CardLayout needed.
The layout.replace() answer only exists/works on the GroupLayout Manager.
Other LayoutManagers (CardLayout, BoxLayout etc) do NOT support this feature, but require you to first RemoveLayoutComponent( and then AddLayoutComponent( back again. :-) [Just setting the record straight]
I suggest you to add both panel at frame creation, then change the visible panel by calling setVisible(true/false) on both.
When calling setVisible, the parent will be notified and asked to repaint itself.
class Frame1 extends javax.swing.JFrame {
remove(previouspanel); //or getContentPane().removeAll();
add(newpanel); //or setContentPane(newpanel);
invalidate(); validate(); // or ((JComponent) getContentPane()).revalidate();
repaint(); //DO NOT FORGET REPAINT
}
Sometimes you can do the work without using the revalidation and sometimes without using the repaint.My advise use both.
Just call the method pack() after setting the ContentPane, (java 1.7, maybe older) like this:
JFrame frame = new JFrame();
JPanel panel1 = new JPanel();
JPanel panel2 = new JPanel();
....
frame.setContentPane(panel1);
frame.pack();
...
frame.setContentPane(panel2);
frame.pack();
...
To put it simple, there's a simple java swing app that consists of JFrame with some components in it. One of the components is a JPanel that is meant to be replaced by another JPanel on user action.
So, what's the correct way of doing such a thing? I've tried
panel = new CustomJPanelWithComponentsOnIt();
parentFrameJPanelBelongsTo.pack();
but this won't work. What would you suggest?
Your use case, seems perfect for CardLayout.
In card layout you can add multiple panels in the same place, but then show or hide, one panel at a time.
1) Setting the first Panel:
JFrame frame=new JFrame();
frame.getContentPane().add(new JPanel());
2)Replacing the panel:
frame.getContentPane().removeAll();
frame.getContentPane().add(new JPanel());
Also notice that you must do this in the Event's Thread, to ensure this use the SwingUtilities.invokeLater or the SwingWorker
frame.setContentPane(newContents());
frame.revalidate(); // frame.pack() if you want to resize.
Remember, Java use 'copy reference by value' argument passing. So changing a variable wont change copies of the reference passed to other methods.
Also note JFrame is very confusing in the name of usability. Adding a component or setting a layout (usually) performs the operation on the content pane. Oddly enough, getting the layout really does give you the frame's layout manager.
Hope this piece of code give you an idea of changing jPanels inside a JFrame.
public class PanelTest extends JFrame {
Container contentPane;
public PanelTest() {
super("Changing JPanel inside a JFrame");
contentPane=getContentPane();
}
public void createChangePanel() {
contentPane.removeAll();
JPanel newPanel=new JPanel();
contentPane.add(newPanel);
System.out.println("new panel created");//for debugging purposes
validate();
setVisible(true);
}
}
On the user action:
// you have to do something along the lines of
myJFrame.getContentPane().removeAll()
myJFrame.getContentPane().invalidate()
myJFrame.getContentPane().add(newContentPanel)
myJFrame.getContentPane().revalidate()
Then you can resize your wndow as needed.
Game game = new Game();
getContentPane().removeAll();
setContentPane(game);
getContentPane().revalidate(); //IMPORTANT
getContentPane().repaint(); //IMPORTANT
It all depends on how its going to be used. If you will want to switch back and forth between these two panels then use a CardLayout. If you are only switching from the first to the second once and (and not going back) then I would use telcontars suggestion and just replace it. Though if the JPanel isn't the only thing in your frame I would use
remove(java.awt.Component) instead of removeAll.
If you are somewhere in between these two cases its basically a time-space tradeoff. The CardLayout will save you time but take up more memory by having to keep this whole other panel in memory at all times. But if you just replace the panel when needed and construct it on demand, you don't have to keep that meory around but it takes more time to switch.
Also you can try a JTabbedPane to use tabs instead (its even easier than CardLayout because it handles the showing/hiding automitically)
The other individuals answered the question. I want to suggest you use a JTabbedPane instead of replacing content. As a general rule, it is bad to have visual elements of your application disappear or be replaced by other content. Certainly there are exceptions to every rule, and only you and your user community can decide the best approach.
Problem: My component does not appear after I have added it to the container.
You need to invoke revalidate and repaint after adding a component before it will show up in your container.
Source: http://docs.oracle.com/javase/tutorial/uiswing/layout/problems.html
I was having exactly the same problem!! Increadible!! The solution I found was:
Adding all the components (JPanels) to the container;
Using the setVisible(false) method to all of them;
On user action, setting setVisible(true) to the panel I wanted to
show.
// Hiding all components (JPanels) added to a container (ex: another JPanel)
for (Component component : this.container.getComponents()) {
component.setVisible(false);
}
// Showing only the selected JPanel, the one user wants to see
panel.setVisible(true);
No revalidate(), no validate(), no CardLayout needed.
The layout.replace() answer only exists/works on the GroupLayout Manager.
Other LayoutManagers (CardLayout, BoxLayout etc) do NOT support this feature, but require you to first RemoveLayoutComponent( and then AddLayoutComponent( back again. :-) [Just setting the record straight]
I suggest you to add both panel at frame creation, then change the visible panel by calling setVisible(true/false) on both.
When calling setVisible, the parent will be notified and asked to repaint itself.
class Frame1 extends javax.swing.JFrame {
remove(previouspanel); //or getContentPane().removeAll();
add(newpanel); //or setContentPane(newpanel);
invalidate(); validate(); // or ((JComponent) getContentPane()).revalidate();
repaint(); //DO NOT FORGET REPAINT
}
Sometimes you can do the work without using the revalidation and sometimes without using the repaint.My advise use both.
Just call the method pack() after setting the ContentPane, (java 1.7, maybe older) like this:
JFrame frame = new JFrame();
JPanel panel1 = new JPanel();
JPanel panel2 = new JPanel();
....
frame.setContentPane(panel1);
frame.pack();
...
frame.setContentPane(panel2);
frame.pack();
...
I am a beginer and I dont know how to add more objects into JFrame.
How could I add more than one JPanel objects into JFrame?
Below is what I have tried.
Thanks for your help.
public class Init extends JFrame{
public Init(){
super("Ball");
Buttons t = new Buttons();
JumpingBall b1 = new JumpingBall();
JumpingBall b2 = new JumpingBall();
t.addBall(b1);
t.addBall(b2);
add(b1);
add(b2);
setSize(500,500);
setResizable(false);
setDefaultCloseOperation(EXIT_ON_CLOSE);
setLocationRelativeTo(null);
}
}
Assuming that JumpingBall extends JPanel, you might want to have a look at the java layout managers here: Link.
The default Layout for a JFrame is the BorderLayout and if you didn't specify where you want to add your component, The BorderLayout will put it in the center by default. In BorderLayout, you cannot have more that one component in the same area. So, in your example you will end up having only the second JumpingBall panel in your frame. If you want to have more than one component at the center, then you will have to create a JPanel and add those components to it using different Layout. The common three Layouts are the BorderLayout, FlowLayout and GridLayout Please have a look at the provided link above to see how the components are arranged.
You can add a number of JPanel objects in a JFrame, using the add method. If only one is displayed, you might need to change your Layout options or use a Layout Manager (Look here for more).
You are seeing only one because it overlapping each other. Just provide setbound(x,y,x1,y1) for you panel component and you will see your panel at location.
or use setLayout(new FlowLayout()); which is going to order your component in respective to other so you will not override each-other.
BorderLayout does something strange. If I add two panels to a Container with the same constraint (BorderLayout.CENTER for instance), then the first one goes away, even if the second one is deleted or made invisible
It seems as though it would make sense for it to "stack" each element on top of the previous ones.
Is this correct and by design? If so, is there some documentation on it?
Has anyone else been frustrated by it? Have you a solution, such as a custom LayoutManager?
Sample code:
JFrame frame = new JFrame();
frame.setSize(500, 500);
JPanel panel1 = new JPanel();
panel1.setBackground(Color.blue);
frame.getContentPane().add(panel1);
JPanel panel2 = new JPanel();
panel2.setBackground(Color.red);
frame.getContentPane().add(panel2);
panel2.setVisible(false); // Seems like it should allow us to see panel1.
frame.setVisible(true);
This creates and displays a 500x500 blank box.
BorderLayout was simply not designed to do what you want. Separation of responsibility. If you want that behavior you should compose: combine the BorderLayout with a CardLayout. Though for the actual stack behavior, you'll have to code something yourself (or find someone who already has.)
Is this correct and by design?
Yes.
You need to understand the basics of how layout managers work. One of the jobs of the layout manager is to set the "location" and "size" of the components added to the panel. In the case of a BorderLayout it only tracks 5 components so only the last component added to the CENTER is known by the layout manager.
Layout management is not done when components are added to the panel. It is done when the frame is packed, or made visible (or the revalidate() method is invoked) . In this case the blue panel is not part of the components managed by the BorderLayout so its size remains (0, 0), which means there is nothing to paint.
Try changing your code to:
JPanel panel1 = new JPanel();
panel1.setSize(200, 200);
and you will see the blue panel painted at the specified size.
Now try commenting out:
//panel2.setVisible(false);
and you will see both panels. This is because as components are added to the panel they are assigned a ZOrder. Basically the last component added is painted first, which is why the blue panel is painted on top of the red panel. Check out the setComponentZOrder() method of the Container class for more information.
The CardLayout is probably the layout manager you should be using, but you can check out the Overlap Layout as well.
To put it simple, there's a simple java swing app that consists of JFrame with some components in it. One of the components is a JPanel that is meant to be replaced by another JPanel on user action.
So, what's the correct way of doing such a thing? I've tried
panel = new CustomJPanelWithComponentsOnIt();
parentFrameJPanelBelongsTo.pack();
but this won't work. What would you suggest?
Your use case, seems perfect for CardLayout.
In card layout you can add multiple panels in the same place, but then show or hide, one panel at a time.
1) Setting the first Panel:
JFrame frame=new JFrame();
frame.getContentPane().add(new JPanel());
2)Replacing the panel:
frame.getContentPane().removeAll();
frame.getContentPane().add(new JPanel());
Also notice that you must do this in the Event's Thread, to ensure this use the SwingUtilities.invokeLater or the SwingWorker
frame.setContentPane(newContents());
frame.revalidate(); // frame.pack() if you want to resize.
Remember, Java use 'copy reference by value' argument passing. So changing a variable wont change copies of the reference passed to other methods.
Also note JFrame is very confusing in the name of usability. Adding a component or setting a layout (usually) performs the operation on the content pane. Oddly enough, getting the layout really does give you the frame's layout manager.
Hope this piece of code give you an idea of changing jPanels inside a JFrame.
public class PanelTest extends JFrame {
Container contentPane;
public PanelTest() {
super("Changing JPanel inside a JFrame");
contentPane=getContentPane();
}
public void createChangePanel() {
contentPane.removeAll();
JPanel newPanel=new JPanel();
contentPane.add(newPanel);
System.out.println("new panel created");//for debugging purposes
validate();
setVisible(true);
}
}
On the user action:
// you have to do something along the lines of
myJFrame.getContentPane().removeAll()
myJFrame.getContentPane().invalidate()
myJFrame.getContentPane().add(newContentPanel)
myJFrame.getContentPane().revalidate()
Then you can resize your wndow as needed.
Game game = new Game();
getContentPane().removeAll();
setContentPane(game);
getContentPane().revalidate(); //IMPORTANT
getContentPane().repaint(); //IMPORTANT
It all depends on how its going to be used. If you will want to switch back and forth between these two panels then use a CardLayout. If you are only switching from the first to the second once and (and not going back) then I would use telcontars suggestion and just replace it. Though if the JPanel isn't the only thing in your frame I would use
remove(java.awt.Component) instead of removeAll.
If you are somewhere in between these two cases its basically a time-space tradeoff. The CardLayout will save you time but take up more memory by having to keep this whole other panel in memory at all times. But if you just replace the panel when needed and construct it on demand, you don't have to keep that meory around but it takes more time to switch.
Also you can try a JTabbedPane to use tabs instead (its even easier than CardLayout because it handles the showing/hiding automitically)
The other individuals answered the question. I want to suggest you use a JTabbedPane instead of replacing content. As a general rule, it is bad to have visual elements of your application disappear or be replaced by other content. Certainly there are exceptions to every rule, and only you and your user community can decide the best approach.
Problem: My component does not appear after I have added it to the container.
You need to invoke revalidate and repaint after adding a component before it will show up in your container.
Source: http://docs.oracle.com/javase/tutorial/uiswing/layout/problems.html
I was having exactly the same problem!! Increadible!! The solution I found was:
Adding all the components (JPanels) to the container;
Using the setVisible(false) method to all of them;
On user action, setting setVisible(true) to the panel I wanted to
show.
// Hiding all components (JPanels) added to a container (ex: another JPanel)
for (Component component : this.container.getComponents()) {
component.setVisible(false);
}
// Showing only the selected JPanel, the one user wants to see
panel.setVisible(true);
No revalidate(), no validate(), no CardLayout needed.
The layout.replace() answer only exists/works on the GroupLayout Manager.
Other LayoutManagers (CardLayout, BoxLayout etc) do NOT support this feature, but require you to first RemoveLayoutComponent( and then AddLayoutComponent( back again. :-) [Just setting the record straight]
I suggest you to add both panel at frame creation, then change the visible panel by calling setVisible(true/false) on both.
When calling setVisible, the parent will be notified and asked to repaint itself.
class Frame1 extends javax.swing.JFrame {
remove(previouspanel); //or getContentPane().removeAll();
add(newpanel); //or setContentPane(newpanel);
invalidate(); validate(); // or ((JComponent) getContentPane()).revalidate();
repaint(); //DO NOT FORGET REPAINT
}
Sometimes you can do the work without using the revalidation and sometimes without using the repaint.My advise use both.
Just call the method pack() after setting the ContentPane, (java 1.7, maybe older) like this:
JFrame frame = new JFrame();
JPanel panel1 = new JPanel();
JPanel panel2 = new JPanel();
....
frame.setContentPane(panel1);
frame.pack();
...
frame.setContentPane(panel2);
frame.pack();
...