In java Is it possible to get consistent hash code for an object when we are running the application multiple times
Sure. If it is a String for example, then String.hashCode() gives a consistent hashcode each time you run the application.
You only get into trouble if the hashcode incorporates something other than the values of the object's component fields; e.g. an identity hashcode. And of course, this means that the object class needs to override Object.hashcode() at some point, because that method gives you an identity hashcode.
FOLLOW UP
Judging from comments on other answers, the OP still seems to be pursuing the illusory goal of a unique hash function; i.e. some function that will map (for example) any String to a hashcode that is unique for all possible Strings.
Unfortunately this is impossible in the general case, and in this case. Furthermore, it is a simple matter to construct a proof that a String to int hash function that generates unique int values is mathematically impossible. (I won't bore you with the details ... but the basis of the proof is that there are more String values than int values.)
In fact, the only situation where such a hash function is possible is when the set of all possible values of input type has a size that is no greater than the number of possible values of the integer type. There are hash functions that will map a byte, char, short or int to a unique int, but a hash function that maps long values to unique int values is impossible.
It depends on implementation on hashCode() method of Object
It can also be
public int hashCode() {
return 1;
}
No, not for objects in general. Objects with their own hashcode method will probably be consistent across runs.
Implement/override the public int hashCode() method all objects have?
You have to decide what makes the object the same. Usually it is based on the content of one or more fields. In this case, you should make the hashCode based on these fields. (And equals())
However, I would suggest you shouldn't rely on the hashCode being the same between runs of the application. This is highly likely to break when you change code and very hard to fix when it does. e.g. if you add/remove a field which is part of the hashCode or change the way the hashCode is calculated or anything ti depends on, the hashCode will change.
What are you trying to do? This sounds like a problem where a different solution would be better.
Looking in the contract of hashCode:
Whenever it is invoked on the same object more than once during an
execution of a Java application, the
hashCode method must consistently
return the same integer, provided no
information used in equals comparisons
on the object is modified. This
integer need not remain consistent
from one execution of an application
to another execution of the same
application.
If two objects are equal according to the equals(Object) method, then
calling the hashCode method on each of
the two objects must produce the same
integer result.
It is not required that if two objects are unequal according to the
equals(java.lang.Object) method, then
calling the hashCode method on each of
the two objects must produce distinct
integer results. However, the
programmer should be aware that
producing distinct integer results for
unequal objects may improve the
performance of hashtables.
So it is not guaranteed that the hashCode is euqal between invocations. In reality, there are be quite some hashCode implementations that return the same value across invocations: String and all types used for boxing (like Integer) have a consistent return value for hashCode. Objects that only combine member hashCodes where each member has a consistent return value also feature this consistency. So, in practice it should be rather common to have a hashCode return value that is consistent accross invocations.
Related
If two objects return same hashCode, doesn't it mean that they are equal? Or we need equals to prevent collisions?
And can I implement equals by comparing hashCodes?
If two objects have the same hashCode then they are NOT necessarily equal. Otherwise you will have discovered the perfect hash function. But the opposite is true - if the objects are equal, then they must have the same hashCode.
hashCode and Equals are different information about objects
Consider the analogy to Persons where hashcode is the Birthday,
in that escenario, you and many other people have the same b-day (same hashcode), all you are not the same person however..
Why does Java need equals() if there is hashCode()?
Java needs equals() because it is the method through which object equality is tested by examining classes, fields, and other conditions the designer considers to be part of an equality test.
The purpose of hashCode() is to provide a hash value primarily for use by hash tables; though it can also be used for other purposes. The value returned is based on an object's fields and hash codes of its composite and/or aggregate objects. The method does not take into account the class or type of object.
The relationship between equals() and hashCode() is an implication.
Two objects that are equal implies that the have the same hash code.
Two objects having the same hash code does not imply that they are equal.
The latter does not hold for several reasons:
There is a chance that two distinct objects may return the same hash code. Keep in mind that a hash value folds information from a large amount of data into a smaller number.
Two objects from different classes with similar fields will most likely use the same type of hash function, and return equal hash values; yet, they are not the same.
hashCode() can be implementation-specific returning different values on different JVMs or JVM target installations.
Within the same JVM, hashCode() can be used as a cheap precursor for equality by testing for a known hash code first and only if the same testing actual equality; provided that the equality test is significantly more expensive than generating a hash code.
And can I implement equals by comparing hashCodes?
No. As mentioned, equal hash codes does not imply equal objects.
The hashCode method as stated in the Oracle Docs is a numeric representation of an object in Java. This hash code has limited possible values (represented by the values which can be stored in an int).
For a more complex class, there is a high possibility that you will find two different objects which have the same hash code value. Also, no one stops you from doing this inside any class.
class Test {
#Override
public int hashCode() {
return 0;
}
}
So, it is not recommended to implement the equals method by comparing hash codes. You should use them for comparison only if you can guarantee that each object has an unique hash code. In most cases, your only certainty is that if two objects are equal using o1.equals(o2) then o1.hashCode() == o2.hashCode().
In the equals method you can define a more complex logic for comparing two objects of the same class.
If two objects return same hashCode, doesn't it mean that they are equal?
No it doesn't mean that.
The javadocs for Object state this:
The general contract of hashCode is:
Whenever it is invoked on the same object more than once during an execution of a Java application, the hashCode method must consistently
return the same integer, provided no information used in equals
comparisons on the object is modified. ...
If two objects are equal according to the equals(Object) method, then calling the hashCode method on each of the two objects must
produce the same integer result.
It is not required that if two objects are unequal according to the equals(java.lang.Object) method, then calling the hashCodemethod on
each of the two objects must produce distinct integer results. ...
Note the highlighted statement. It plainly says "No" to your question.
There is another way to look at this.
The hashCode returns an int.
There are only 232 distinct values that an int can take.
If a.hashCode() == b.hashCode() implies a.equals(b), then there can be only 232 distinct (i.e. mutually unequal) objects at any given time in a running Java application.
That last point is plainly not true. Indeed, it is demonstrably not true if you have a large enough heap to hold 232 instances of java.lang.Object ... in a 64-bit JVM.
And a third way is to some well-known examples where two different two character strings have the same hashcode.
Given that your assumption is incorrect, the reasoning that follows from it is also incorrect.
Java does need an equals method.
You generally cannot implement equals using just hashCode.
You may be able to use hashCode to implement a faster equals method, but only if calling hashCode twice is faster than comparing two objects. It generally isn't.
hashCodes are equal -> Objects might be equal -> further comparision is required
hashCodes are different -> Object are not equal (if hashCode is implemented right)
That's how equals method are implemented. At first you check if hashCodes are equal. If yes, you need to check class fields to see if it represents the exact same object. If hashCodes are different, you can be sure that objects are not equal.
Sometimes (very often?) you don't!
These answers are not untrue. But they don't tell the whole story.
One example would be where you are creating a load of objects of class SomeClass, and each instance that is created is given a unique ID by incrementing a static variable, nInstanceCount, or some such, in the constructor:
iD = nInstanceCount++;
Your hash function could then be
int hashCode(){
return iD;
}
and your equals could then be
boolean equals( Object obj ){
if( ! ( obj instanceof SomeClass )){
return false;
}
return hashCode() == obj.hashCode();
}
... under such circumstances your idea that "equals is superfluous" is effectively true: if all classes behaved like this, Java 10 (or Java 23) might say, ah, let's just get rid of silly old equals, what's the point? (NB backwards compatibility would then go out the window).
There are two essential points:
you couldn't then create more than MAXINT instances of SomeClass. Or... you could ... if you set up a system for reassigning the IDs of previously destroyed instances. IDs are typically long rather than int ... but this wouldn't work because hashCode() returns int.
none of these objects could then be "equal" to another one, since equality = identity for this particular class, as you have defined it. Often this is desirable. Often it shuts off whole avenues of possibilities...
The necessary implication of your question is, perhaps, what's the use of these two methods which, in a rather annoying way, have to "cooperate"? Frelling, in his/her answer, alluded to the crucial point: hash codes are needed for sorting into "buckets" with classes like HashMap. It's well worth reading up on this: the amount of advanced maths that has gone into designing efficient "bucket" mechanisms for classes like HashMap is quite frightening. After reading up on it you may come to have (like me) a bit of understanding and reverence about how and why you should bother implementing hashCode() with a bit of thought!
While reviewing a large code base, I've often come across cases like this:
#Override
public int hashCode()
{
return someFieldValue.hashCode();
}
where the programmer, instead of generating their own unique hash code for the class, simply inherits the hash code from a field value. My gut feeling (which might just as well be digestive problems) tells me that this is wrong, but I can't put my finger on it. What problems can arise, if any, with this sort of implementation?
This is fine if you want to hash your object based on a single property.
For example, in a Person class you might have an ID property that uniquely identifies a Person, so the hashCode() of Person can simply be the hash of that ID.
In addition, the hashCode() is related to the implementation of equals. If two objects are equal, they must have the same hashCode (the opposite doesn't have to be true - two non equal objects may still have the same hashCode). Therefore, if equality is determined by a single property (such as a unique ID), the hashCode method must also use only that single property.
This can be seen in the JavaDoc of hashCode :
The general contract of hashCode is:
Whenever it is invoked on the same object more than once during an execution of a Java application, the hashCode method must consistently return the same integer, provided no information used in equals comparisons on the object is modified. This integer need not remain consistent from one execution of an application to another execution of the same application.
If two objects are equal according to the equals(Object) method, then calling the hashCode method on each of the two objects must produce the same integer result.
It is not required that if two objects are unequal according to the equals(java.lang.Object) method, then calling the hashCode method on each of the two objects must produce distinct integer results. However, the programmer should be aware that producing distinct integer results for unequal objects may improve the performance of hash tables.
Technically speaking, you can return any consistent number from hashCode, even a constant value. The only requirement the contract places upon you is that equal objects must return the same hash code:
If two objects are equal according to the equals(Object) method, then calling the hashCode method on each of the two objects must produce the same integer result.
Theoretically, if all objects return, say, zero for their hashCode, the contract is formally satisfied. However, this makes hashCode completely useless.
The real question is whether you should do it or not. The answer depends on how unique is the field the hash code of which you are returning. It is not uncommon to return the hashCode of a unique identifier of an object for the object's hashCode. On the other hand, if a significant percentage of objects have the sane value of someFieldValue, you would be better off using a different strategy for making the hash code of your object.
hashCode() has to go with equals().
If the only property defining equalness is, for example, an ID, you HAVE TO take care that your hash codes are equal when the ID is equal.
The easiest way to accomplish this is by taking the hashCode() of your ID.
This is fine, if you really want to uniquely identify your object by this single property. Here is an article that explains what object identity really is.
As noted in the documentation of Object, your equals() and hashCode() need to incorporate the same properties, be sure to verify that.
So this means that you should ask yourself the question: do I really want the objects to be equal if only this single property is equal?
Finally do take great care when subclassing objects with a custom equals() and hashcode() implementation, if you want to add properties to the identity of the object, you will break the requirement that a.equals(b) == b.equals(a) (to see why this fails thing about this as a being the super class and b being the subclass.
yes you can do it technically, you need a non-primitive somefieldValue for that.
Let's say I have this situation
Long id = -1L;
System.out.println( id.hashCode() );
id = 0L;
System.out.println( id.hashCode() );
And guess what? Both outputs give same number (0) ! My questions are:
Why this is happening ?
How can I ommit this and calculate proper hash for 0 and -1 ?
Thanks in advance for reply :)
Why is this happening?
Because the implementation of Long.hashCode is as follows:
The result is the exclusive OR of the two halves of the primitive long value held by this Long object. That is, the hashcode is the value of the expression:
(int)(this.longValue()^(this.longValue()>>>32))
How can I omit this and calculate proper hash for 0 and -1 ?
These are proper hashes. Hashes are not guaranteed to be unique; in fact they're guaranteed not to be unique if there are more than 232 possible input values.
If you want a different behaviour, you'd need to write a MyInteger class that behaves differently (although I suspect there's no real good reason to do so).
Depending on the hashing function, 2 different objects can have the same hash code.
From Java doc.
The general contract of hashCode is:
Whenever it is invoked on the same object more than once during an execution of a Java application, the hashCode method must consistently
return the same integer, provided no information used in equals
comparisons on the object is modified. This integer need not remain
consistent from one execution of an application to another execution
of the same application.
If two objects are equal according to the equals(Object) method, then calling the hashCode method on each of the two objects must
produce the same integer result.
It is not required that if two objects are unequal according to the equals(java.lang.Object) method, then calling the hashCode method
on each of the two objects must produce distinct integer results.
However, the programmer should be aware that producing distinct
integer results for unequal objects may improve the performance of
hash tables.
As much as is reasonably practical, the hashCode method defined by
class Object does return distinct integers for distinct objects. (This
is typically implemented by converting the internal address of the
object into an integer, but this implementation technique is not
required by the JavaTM programming language.)
I have a class
class Pair<T>{
private T data;
private T alternative;
}
Two pair objects would be equal if
this.data.equals(that.data) && this.alternative.equals(that.alternative) ||
this.data.equals(that.alternative) && this.alternative.equals(that.data)
I'm having difficulty correctly implementing the hashCode() part though. Any suggestions would be appreciated
You should use the hashCode from data and alternative like this :
return this.data.hashCode() + this.alterative.hashCode();
Although it is not the best approach, as if you change the data or alternative, then their hashcode will also change. Think a little bit and see if you really need to use this class as a key in a map and if not a Long or String would be a better candidate.
This should do the trick:
#Override
public int hashCode() {
return data.hashCode() * alternative.hashCode();
}
Since you want to include both fields into the equals, you need to include both fields into the hashCode method. It is correct if unequal objects end up having the same hash code, but equal objects according to your scheme will always end up having the same hash code with this method.
Refer to the java doc, the general contract of hashCode is(copied from java doc):
- Whenever it is invoked on the same object more than once during an
execution of a Java application, the hashCode method must
consistently return the same integer, provided no information used in
equals comparisons on the object is modified. This integer need not
remain consistent from one execution of an application to another
execution of the same application.
- If two objects are equal according to the equals(Object) method, then
calling the hashCode method on each of the two objects must produce
the same integer result.
- It is not required that if two objects are unequal according to the
equals(java.lang.Object) method, then calling the hashCode method on
each of the two objects must produce distinct integer results.
However, the programmer should be aware that producing distinct
integer results for unequal objects may improve the performance of
hashtables.
So from your implementation of equals, data and alternative are switchable. So you need make sure in your hashCode implementation returns the same value if you switch the position of data.hashCode() and alternative.hashCode(). If you are not sure, just return a const value such as 1 (But it may cause performance issue when you try to put the object into a Map).
The hashCode of a java Hashtable element is always unique?
If not, how can I guarantee that one search will give me the right element?
Not necessarily. Two distinct (and not-equal) objects can have the same hashcode.
First thing first.
You should consider to use HashMap instead of Hashtable, as the latter is considered obsolete (it enforces implicit synchronization, which is not required most of the time. If you need a synchronized HashMap, it is easily doable)
Now, regarding your question.
Hashcode is not guaranteed to be unique mathematically-wise,
however, when you're using HashMap (or Hashtable), it does not matter.
If two keys generate the same hash code, an equals is automatically invoked on each one of the keys to guarantee that the correct object will be retrieved.
If you're using a String as your key, you're worry free,
But if you're using your own object as the key, you should override the equals and the hashCode methods.
The equals method is mandatory for the proper operation of HashMap, whereas the hashCode method should be coded such that the hash-table will be relatively sparse (otherwise your hashmap, will be just a long array)
If you're using Eclipse there's an easy way to generate hashCode and equals, it basically does all the work for you.
From the Java documentation:
The general contract of hashCode is:
Whenever it is invoked on the same object more than once during an
execution of a Java application, the hashCode method must consistently
return the same integer, provided no information used in equals comparisons
on the object is modified. This integer need not remain consistent
from one execution of an application to another execution of the same
application.
If two objects are equal according to the equals(Object)
method, then calling the hashCode method on each of the two objects must
produce the same integer result.
It is not required that if two objects are unequal according to the
equals(java.lang.Object) method, then calling the hashCode method on each of
the two objects must produce distinct integer results. However, the
programmer should be aware that producing distinct integer results for
unequal objects may improve the performance of hashtables.
As much as is reasonably practical,
the hashCode method defined by class
Object does return distinct integers
for distinct objects. (This is
typically implemented by converting
the internal address of the object
into an integer, but this
implementation technique is not
required by the JavaTM programming
language.)
So yes, you can typically expect the default hashCode for an Object to be unique. However, if the method has been overridden by the class you are storing in the Hashtable, all bets are off.
Ideally, yes. In reality, collisions do occasionally happen.
The hashCode of a java Hashtable element is always unique?
They should. At least within the same class.
If not, how can I guarantee that one search will give me the right element?
By specifying your self a good hasCode implementation for your class: Override equals() and hashCode