String to be split
abc:def:ghi\:klm:nop
String should be split based on ":"
"\" is escape character. So "\:" should not be treated as token.
split(":") gives
[abc]
[def]
[ghi\]
[klm]
[nop]
Required output is array of string
[abc]
[def]
[ghi\:klm]
[nop]
How can the \: be ignored
Use a look-behind assertion:
split("(?<!\\\\):")
This will only match if there is no preceding \. Using double escaping \\\\ is required as one is required for the string declaration and one for the regular expression.
Note however that this will not allow you to escape backslashes, in the case that you want to allow a token to end with a backslash. To do that you will have to first replace all double backslashes with
string.replaceAll("\\\\\\\\", ESCAPE_BACKSLASH)
(where ESCAPE_BACKSLASH is a string which will not occur in your input) and then, after splitting using the look-behind assertion, replace the ESCAPE_BACKSLASH string with an unescaped backslash with
token.replaceAll(ESCAPE_BACKSLASH, "\\\\")
Gumbo was right using a look-behind assertion, but in case your string contains the escaped escape character (e.g. \\) right in front of a comma, the split might break. See this example:
test1\,test1,test2\\,test3\\\,test3\\\\,test4
If you do a simple look-behind split for (?<!\\), as Gumbo suggested, the string gets split into two parts only test1\,test1 and test2\\,test3\\\,test3\\\\,test4. This is because the look-behind just checks one character back for the escape character. What would actually be correct, if the string is split on commas and commas preceded by an even number of escape characters.
To achieve this a slightly more complex (double) look-behind expression is needed:
(?<!(?<![^\\]\\(?:\\{2}){0,10})\\),
Using this more complex regular expression in Java, again requires to escape all \ by \\. So this should be a more sophisticated answer to your question:
"any comma separated string".split("(?<!(?<![^\\\\]\\\\(?:\\\\{2}){0,10})\\\\),");
Note: Java does not support infinite repetitions inside of lookbehinds. Therefore only up to 10 repeating double escape characters are checked by using the expression {0,10}. If needed, you can increase this value by adjusting the latter number.
Related
Why do I need four backslashes (\) to add one backslash into a String?
String replacedValue = neName.replaceAll(",", "\\\\,");
Here in above code you can check I have to replace all commas (,) from \, but I have to add three more backslash (\) ?
Can anybody explain this concept?
Escape once for Java, and a second time for regexp.
\ -> \\ -> \\\\
Or since you're not actually using regular expressions, take khelwood's advice and use replace(String,String) so you need to only escape once.
The documentation of String.replaceAll(regex, replacement) states:
Note that backslashes (\) and dollar signs ($) in the replacement string may cause the results to be different than if it were being treated as a literal replacement string; see Matcher.replaceAll.
The documentation of Matcher.replaceAll(replacement) then states:
backslashes are used to escape literal characters in the replacement string
So to put this more clearly, when you replace with \,, it is as if you were escaping the comma. But what you want is really the \ character, so you should escape it with \\,. Since that in Java, \ also needs to be escaped, the replacement String becomes \\\\,.
If you are having a hard time remembering all this, you can use the method Matcher.quoteReplacement(s), whose goal is to correctly escape the replacement part. Your code would become:
String replacedValue = neName.replaceAll(",", Matcher.quoteReplacement("\\,"));
\ is used for escape sequence
For example
go to next line then use \n or \r
for tab \t
likewise to print \ which is special in string literal you have to escape it with another \ which gives us \\
Now replaceAll should be used with a regex, since you're not using a regex, use replace as suggested in the comments.
String s = neName.replace(",", "\\,");
You have to first escape the backslash because it's a literal (giving \\), and then escape it again because of the regular expression (giving \\\\).
Therefore this -
String replacedValue = neName.replaceAll(",", "\\\\,"); // you need ////
You can use replace instead of replaceAll-
String replacedValue = neName.replace(",", "\\,");
I'm learning Regex, and running into trouble in the implementation.
I found the RegexTestHarness on the Java Tutorials, and running it, the following string correctly identifies my pattern:
[\d|\s][\d]\.
(My pattern is any double digit, or any single digit preceded by a space, followed by a period.)
That string is obtained by this line in the code:
Pattern pattern =
Pattern.compile(console.readLine("%nEnter your regex: "));
When I try to write a simple class in Eclipse, it tells me the escape sequences are invalid, and won't compile unless I change the string to:
[\\d|\\s][\\d]\\.
In my class I'm using`Pattern pattern = Pattern.compile();
When I put this string back into the TestHarness it doesn't find the correct matches.
Can someone tell me which one is correct? Is the difference in some formatting from console.readLine()?
\ is special character in String literals "...". It is used to escape other special characters, or to create characters like \n \r \t.
To create \ character in string literal which can be used in regex engine you need to escape it by adding another \ before it (just like you do in regex when you need to escape its metacharacters like dot \.). So String representing \ will look like "\\".
This problem doesn't exist when you are reading data from user, because you are already reading literals, so even if user will write in console \n it will be interpreted as two characters \ and n.
Also there is no point in adding | inside class character [...] unless your intention is to make that class also match | character, remember that [abc] is the same as (a|b|c) so there is no need for | in "[\\d|\\s]".
If you want to represent a backslash in a Java string literal you need to escape it with another backslash, so the string literal "\\s" is two characters, \ and s. This means that to represent the regular expression [\d\s][\d]\. in a Java string literal you would use "[\\d\\s][\\d]\\.".
Note that I also made a slight modification to your regular expression, [\d|\s] will match a digit, whitespace, or the literal | character. You just want [\d\s]. A character class already means "match one of these", since you don't need the | for alternation within a character class it loses its special meaning.
My pattern is any double digit or single digit preceded by a space, followed by a period.)
Correct regex will be:
Pattern pattern = Pattern.compile("(\\s\\d|\\d{2})\\.");
Also if you're getting regex string from user input then your should call:
Pattern.quote(useInputRegex);
To escape all the regex special characters.
Also you double escaping because 1 escape is handled by String class and 2nd one is passed on to regex engine.
What is happening is that escape sequences are being evaluated twice. Once for java, and then once for your regex.
the result is that you need to escape the escape character, when you use a regex escape sequence.
for instance, if you needed a digit, you'd use
"\\d"
I want to match \Q and \E in a Java regex.
I am writing a program which will compute the length of the string, matching to the pattern (this program assumes that there is no any quantifier in regex except {some number}, that's why the length of the string is uniquely defined) and I want at first delete all expressions like \Qsome text\E.
But regex like this:
"\\Q\\Q\\E\\Q\\E\\E"
obviously doesn't work.
Use Pattern.quote(...):
String s = "\\Q\\Q\\E\\Q\\E\\E";
String escaped = Pattern.quote(s);
Just escape the backslashes. The sequence \\\\ matches a literal backslash, so to match a literal \Q:
"\\\\Q"
and to match a literal \E:
"\\\\E"
You can make it more readable for a maintainer by making it obvious that each sequence matches a single character using [...] as in:
"[\\\\][Q]"
From what I understand, the backslash dot (\.) means one character of any character? So because backslash is an escape, it should be backslash backslash dot ("\\.")
What does this do to a string? I just saw this in an existing code I am working on. From what I understand, it will split the string into individual characters. Why do this instead of String.toCharArray(). So this splits the string to an array of string which contains only one char for each string in the array?
My guess is that you are missing that backslash ('\') characters are escape characters in Java String literals. So when you want to use a '\' escape in a regex written as a Java String you need to escape it; e.g.
Pattern.compile("\."); // Java syntax error
// A regex that matches a (any) character
Pattern.compile(".");
// A regex that matches a literal '.' character
Pattern.compile("\\.");
// A regex that matches a literal '\' followed by one character
Pattern.compile("\\\\.");
The String.split(String separatorRegex) method splits a String into substrings separated by substrings matching the regex. So str.split("\\.") will split str into substrings separated by a single literal '.' character.
The regex "." would match any character as you state. However an escaped dot "\." would match literal dot characters. Thus 192.168.1.1 split on "\." would result in {"192", "168", "1", "1"}.
Your wording isn't completely clear, but I think this is what you're asking.
I have comma separated list of regular expressions:
.{8},[0-9],[^0-9A-Za-z ],[A-Z],[a-z]
I have done a split on the comma. Now I'm trying to match this regex against a generated password. The problem is that Pattern.compile does not like square brackets that is not escaped.
Can some please give me a simple function that takes a string like so: [0-9] and returns the escaped string \[0-9\].
For some reason, the above answer didn't work for me. For those like me who come after, here is what I found.
I was expecting a single backslash to escape the bracket, however, you must use two if you have the pattern stored in a string. The first backslash escapes the second one into the string, so that what regex sees is \]. Since regex just sees one backslash, it uses it to escape the square bracket.
\\]
In regex, that will match a single closing square bracket.
If you're trying to match a newline, for example though, you'd only use a single backslash. You're using the string escape pattern to insert a newline character into the string. Regex doesn't see \n - it sees the newline character, and matches that. You need two backslashes because it's not a string escape sequence, it's a regex escape sequence.
You can use Pattern.quote(String).
From the docs:
public static String quote​(String s)
Returns a literal pattern String for the specified String.
This method produces a String that can be used to create a Pattern that would match the string s as if it were a literal pattern.
Metacharacters or escape sequences in the input sequence will be given no special meaning.
You can use the \Q and \E special characters...anything between \Q and \E is automatically escaped.
\Q[0-9]\E
Pattern.compile() likes square brackets just fine. If you take the string
".{8},[0-9],[^0-9A-Za-z ],[A-Z],[a-z]"
and split it on commas, you end up with five perfectly valid regexes: the first one matches eight non-line-separator characters, the second matches an ASCII digit, and so on. Unless you really want to match strings like ".{8}" and "[0-9]", I don't see why you would need to escape anything.