I have a JPanel that holds a JScrollPane that holds a JPanel as such:
masterPanel.add(buttonPanel, BorderLayout.NORTH);
inner.setLayout(new BorderLayout());
inner.add(infoPanel, BorderLayout.NORTH);
inner.add(writingPanel, BorderLayout.CENTER);
beholder = new JScrollPane(inner);
masterPanel.add(beholder, BorderLayout.CENTER);
I want beholder to be a JScrollPane so that the button panel will display at all times while scrolling the beholder (inner scroll pane). This all works fine, but the problem is the panels inside of beholder do not line wrap. So I have a long line of text in infoPanel that causes a very long, undesirable horizontal scroll.
If I just change the last line to add inner instead of beholder, it works fine (wraps correctly), but then the button panel won't stay at the top when the user scrolls down.
I'm totally stuck. Basically my question is how to get the panels inside of the JScrollPane to word wrap normally.
The problem is wrapping horizontally. Even if I set beholder.setPreferredSize() to a very low x and y dimension, it will ignore the x dimension entirely even though it seems to obey the y dimension normally.
I think the Scrollable Panel will help you out.
For some reason, this problem is resolved by calling:
inner.setPreferredSize(inner.getPreferredSize());
This will cause the wrap to occur.
Related
I already have a panel made (its a row of buttons), and have it located at the bottom of a frame (SOUTH), but I would like to add two rows (panels/ subpanels) beneath it (a text input line and output line if it matters). Right now the only thing I know to do is declare and add more panels, which would be fine, but when I specify .SOUTH they go over top of the previous panel.
EDIT: The solution I used
As suggested by Ted Hopp, I added my original panel (now called subPanel1), as well as the two new panels which were going on top of the original (subPanel2 & subPanel3), to a fourth "container panel" (bottomCotainerPanel). Since I only had three subPanels, this allowed me to specify where in the containerPanel each subPanel would go (using NORTH, CENTER, SOUTH, might have to do something slightly different if you had more than 3...), and then specify where the contianerPanel would go in the frame (SOUTH).
subPanel1.setLayout(new GridLayout(1,6)); //Layout of subPanel1
subPanel1.add(clearButton);
subPanel1.add(customerNameLabel);
subPanel1.add(customerNameTextField);
subPanel1.add(showByNameButton);
subPanel1.add(openNewSavingsButton);
subPanel1.add(openNewCheckingButton);
subPanel2.add(sendChatTextField);
subPanel2.add(sendButton);
subPanel2.add(clearButton2);
subPanel3.add(receiveChatTextField);
subPanel3.add(nextButton);
subPanel3.add(previousButton);
bottomContainerPanel.setLayout(new GridLayout(3,1)); //Layout of Container Panel
bottomContainerPanel.add(subPanel1, BorderLayout.NORTH);
bottomContainerPanel.add(subPanel2, BorderLayout.CENTER);
bottomContainerPanel.add(subPanel3, BorderLayout.SOUTH);
tellerWindow.getContentPane().add(bottomContainerPanel, BorderLayout.SOUTH);
You need to add a single container panel as the SOUTH panel of the frame. The container itself should have the layout that you want for everything that goes at the bottom.
If you just want to split panel onto 2 equal parts at south and north use GridLayout. If you want something in the middle you can use BorderLayout.
If you want to give your user ability to change the sub-panels size use JSplitPane.
I had a similar problem trying to put several rows of buttons into a panel borrowed from the ListDemo example. Well, the first thing to do is to read about BorderLayout: How to Use BorderLayout, or at least see the image shown there:
You cannot have multiple bottom rows in a BorderLayout. But you can use a nested layout. What we need is a BoxLayout, see How to Use BoxLayout:
.
We just have to replace the buttons shown on the above image by rows of buttons.
public class MyStuff extends JPanel {
...
public MyStuff() {
super(new BorderLayout());
...
JPanel buttonArea = new JPanel();
buttonArea.setLayout(new BoxLayout(buttonArea, BoxLayout.PAGE_AXIS));
add(buttonArea, BorderLayout.PAGE_END);
...
//if you dislike the default center alignment:
//panelWithButtons1.setAlignmentX(Component.LEFT_ALIGNMENT);
buttonArea.add(...);// add the 1st panel with buttons
buttonArea.add(...);// add the 2nd panel with buttons
buttonArea.add(...);// add the 3rd panel with buttons
I've created a JPanel and JScrollPane like so:
JPanel panel = new JPanel();
panel.setPreferredSize(5000, 5000);
JScrollPane scrollPane = new JScrollPane(panel, JScrollPane.VERTICAL_SCROLLBAR_ALWAYS, JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
scrollPanel.getViewport().setBackground(Color.GRAY); //panel is white
I will be using event handlers to dynamically resize the panel. The problem is, sometimes the panel is smaller than the viewport. I'd set the panel's size like this:
panel.setPreferredSize(10, 10); //Just an example
but the panel will never be smaller than the viewport. I tried using
panel.setSize(10, 10);
and i saw a gray flicker (the viewport's background showing through), which indicated that the panel was being sized to what i wanted it to be, but then grew to the viewport's size. How can i stop this?
To control the sizing the view inside a JViewport, let it implement the Scrollable interface. Without, it's always forced to the size of the viewport.
I have been trying to use JScrollPane with my applet, but it doesn't work. I have a JPanel to which I add 20 buttons, and I want to be able to scroll up and down this JPanel. Instead, the scrollbars do not appear. When I use setPreferredSize they still did not appear even though only about 3 of the buttons are being displayed and the rest are cut off. If I do not use setPreferredSize, there might as well not be any scrollbars because I have to make the window big enough to see all of the buttons. If I try to make the scrollbars always visible, they appear but do nothing. I tried the exact same code with JFrame instead of Applet, and it works fine, but I need it to be an applet. Is JScrollPane incompatible with applets? (Note: I tried to use an outer JPanel and add the scrollable panel to it, but it changed nothing). Changing the layouts also doesn't fix the problem. I have attached a simplified version of my code, but it displays the same errors.
Here is the code I have:
JPanel scrollPanel = new JPanel();
scrollPanel.setLayout(new BoxLayout(scrollPanel, BoxLayout.PAGE_AXIS));
JScrollPane scroll = new JScrollPane(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS,
JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
for (int i = 0; i < 20; i++) scrollPanel.add(new JButton("Button " + i));
add(scrollPanel);
validate();
You never all the panel to the scroll pane
You never add the scroll pane to the applet
The basic code should be:
JScrollPane scrollPane = new JScrollPane(...);
scrollPane.setViewportView( scrollPanel );
add( scrollPane );
You are adding components to a Panel so you shouldn't expect to see a scroll pane wihout showing the scrollpane. What you want to do is then add that panel to a scrollpane which would be added to ur main container.
From your code, i think your problem is
add(scrollPanel);
your should be doing this
add(scroll);`
This is because you only added the panel to the frame which does not contain any scrollpane. Since you have added the panel unto the scrollpane, you should add the scrollpane and not the panel to the main container.
It sounds like you are using Swing components (JScrollPane, JPanel, ...) in an AWT container (Applet). Try using JApplet instead.
I want to add a Jpanel on a jscrollpane; also I want to have only vertical scrolling. I want to set layout of my jPanel "flowLaout" and add several components to my jPanel in my code by jpanel.add(component) method. The result is that all components are placed in just one row that excide width of jpanel and are not shown. I have used this tricks and both failed:
jScrollPane1.setHorizontalScrollBar(null);
jScrollPane1.setHorizontalScrollBarPolicy(ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
Wrap Layout should work for you.
I am unsure of the particulars for your current project, but i would recommend MigLayout. It has never served me wrong.
I am currently writing a touchscreen interface with nested MigLayout panels up to 4 or five layers deep, and have not had a single problem.
Please use the below policy to turn on vertical scrolling and turn off horizontal scrolling(Works with Java SE 7):
Panel graphicPanel = new Panel();
JScrollPane scrollbar = new JScrollPane(graphicPanel);
scrollbar.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED);
scrollbar.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
scrollbar.setPreferredSize(new Dimension(1300, 600));
scrollbar.setVisible(true);
add(scrollbar, BorderLayout.CENTER);
I'm building a Swing application in Java using NetBeans and I have a problem with layout. My main frame contains a JScrollPane which contains a JPanel called contentPanel which in turn contains a JPanel called listPanel. The listPanel is empty when the program starts, but when the user interacts with the program an unpredictable number of smaller JPanels are added to it. I've used the NetBeans GUI-builder to snap the top edge of listPanel to the top of contentPanel, and the same with the bottom edges.
The problem I have is that when more components are added to listPanel the vertical scrollbar doesen't appear on my scrollpane. The verticalScrollBarPolicy of my scrollpane is set to AS_NEEDED and its viewportView is set to contentPanel. What I think I need to do is to make contentPanel grow when more items are added to listPanel.
The problem I have is that when more components are added to listPanel the vertical scrollbar doesen't appear on my scrollpane.
The scrollbar will appear when the preferred size of the component added to the scrollpane is greater than the size of the scrollpane. When you add components dynamically you need to tell the scrollpane something has changed. So you basic code should be:
panel.add( subPanel );
panel.revalidate();
Or, because you are adding a panel to the sub panel, you may need to revalidate the scrollpane (I don't remember):
panel.add( subPanel );
scrollPane.revalidate();
The key is the revalidate() which tell the layout manager to recalculate its size.
Use a different LayoutManager. One that will allow for vertical growth like BoxLayout. Also remember that you can use multiple layouts and nest them inside of each other for different effects.