Develop Reference

Double data type not working with RDF star query

Apache Jena is not able to query RDF Star Triples that have a double data type in them. Here is the code for reproduction of the issue with Jena 3.17 (it can be reproduced on other versions too).
Dataset dataset = TDB2Factory.createDataset();
Model tempModel = ModelFactory.createDefaultModel();
StringReader reader = new StringReader("#prefix : <http://ex#> "
+ "#prefix xsd: <http://www.w3.org/2001/XMLSchema#> "
+ ":rk :val \"1.0\"^^xsd:double ."
+ "<<:rk :val \"1.0\"^^xsd:double>> :p_key 1");
RDFDataMgr.read(tempModel, reader, null, Lang.TURTLE);
dataset.begin(TxnType.WRITE);
Graph repositoryGraph = dataset.getNamedModel("RAW_MODEL").getGraph();
StmtIterator it = tempModel.listStatements();
while(it.hasNext()) {
repositoryGraph.add(it.nextStatement().asTriple());
}
dataset.commit()
dataset.end()
Now during query time, I am using the following code.
dataset.begin(TxnType.READ);
Query query = QueryFactory.create("SELECT ?s ?o ?id WHERE {"
+ "<<?s <http://ex#val> ?o>> <http://ex#p_key> ?id"
+ "}");
try (QueryExecution exec = QueryExecutionFactory.create(query, dataset.getUnionModel())) {
ResultSet result = exec.execSelect();
while (result.hasNext()) {
System.out.println(result.next().toString());
}
}
dataset.end()
The above query fails to fetch any result. However, if I just replace xsd:double with xsd:float or xsd:decimal the results are fetched. Hence, I am looking for help to understand what is causing this issue with xsd:double?
Note: You might think that I am not using the most optimal way to make insertions. However, this was due to other requirements in the code and reproduction of issue is possible through this route.

It works in Jena 4.0.0.
In 3.17.0 - SPARQL was more like the original RDF* in its use of indexing.
As a consequence, the non-canonical term map cause a problem.
Try a lexical form of "1.0e0"^^xsd:double or v 4.x.x.

Marklogic Aggregate query with Java API

I am trying to get an aggregate query to run using the ML Java API, and am having a bit of trouble. I have followed the documentation, but there is a requirement for a values constraint, and i'm not really sure what that is supposed to look like. I tried the following:
String options =
"<options xmlns:search=\"http://marklogic.com/appservices/search\">" +
" <values name=\"average\">" +
" <range type=\"xs:string\">" +
" <element ns=\"\" name=\"content-id\"/>" +
" </range>" +
" </values>" +
"</options>";
StringHandle handle = new StringHandle(options);
QueryOptionsManager optMgr = client.newServerConfigManager().newQueryOptionsManager();
optMgr.writeOptions("average", handle);
QueryManager queryManager = client.newQueryManager();
StructuredQueryBuilder queryBuilder = queryManager.newStructuredQueryBuilder();
ValuesDefinition valuesDefinition = queryManager.newValuesDefinition("average");
valuesDefinition.setAggregate("avg");
valuesDefinition.setQueryDefinition(queryBuilder.value(queryBuilder.element("content-id"),contentId));
ValuesHandle results = queryManager.values(valuesDefinition, new ValuesHandle());
I took a stab at the options based on some other options i'm using. However, when I try to write the options it tells me Invalid Content: Unexpected Payload.
I get the feeling i'm going about this the wrong way. Essentially I want to find all documents that have a given value in the element "content-id", and then get the average of another element called "star-rating".
Should the options be set for "content-id" or "star-rating"? The documentation doesn't show the use of a queryDefinition, should I remove that? Modify it? Is there an easier way to do this in Java?
Edit: Forgot to mention, I also created an element range index on content-id with type string.

With the guidance of #SamMefford I was able to reach a solution. It looks like this:
String options =
"<options xmlns=\"http://marklogic.com/appservices/search\">" +
" <values name=\"star-rating\">" +
" <range type=\"xs:float\">" +
" <element ns=\"\" name=\"star-rating\"/>" +
" </range>" +
" </values>" +
"</options>";
StringHandle handle = new StringHandle(options);
QueryOptionsManager optMgr = client.newServerConfigManager().newQueryOptionsManager();
optMgr.writeOptions("star-rating", handle);
QueryManager queryManager = client.newQueryManager();
StructuredQueryBuilder queryBuilder =
queryManager.newStructuredQueryBuilder("star-rating");
ValuesDefinition valuesDefinition = queryManager.newValuesDefinition("star-rating");
valuesDefinition.setAggregate("avg");
valuesDefinition.setQueryDefinition(
queryBuilder.range(
queryBuilder.element("content-id"),"string",
StructuredQueryBuilder.Operator.EQ,contentId
)
);
String results = queryManager.values(valuesDefinition, new ValuesHandle())
.getAggregate("avg").getValue();
The options were created around the field that I wanted the average of. I created element indexes for both < star-rating > and < content-id >. The query then allowed me to filter to records with a specific content-id, and then get the average value of their star-ratings.

java.lang.NullPointerException trying to get specific values from hashmap

I've spent several frustrating days on this now and would appreciate some help. I have a Java agent in Lotus Domino 8.5.3 which is activated by a cgi:POST from my Lotusscript validation agent which is checking that customer has filled in the Billing and delivery address form. This is the code that parses the incoming data into a HashMap where field names are mapped to their respective values.
HashMap hmParam = new HashMap(); //Our Hashmap for request_content data
//Grab transaction parameters from form that called agent (CGI: request_content)
if (contentDecoded != null) {
String[] arrParam = contentDecoded.split("&");
for(int i=0; i < arrParam.length; i++) {
int n = arrParam[i].indexOf("=");
String paramName = arrParam[i].substring(0, n);
String paramValue = arrParam[i].substring(n + 1, arrParam[i].length());
hmParam.put(paramName, paramValue); //Old HashMap
if (paramName.equalsIgnoreCase("transaction_id")) {
transactionID = paramValue;
description = "Order " + transactionID + " from Fareham Wine Cellar";
//System.out.println("OrderID = " + transactionID);
}
if (paramName.equalsIgnoreCase("amount")) {
orderTotal = paramValue;
}
if (paramName.equalsIgnoreCase("deliveryCharge")) {
shipping = paramValue;
}
}
}
The block of code above dates back over a year to my original integration of shopping cart to Barclays EPDQ payment gateway. In that agent I recover the specific values and build a form that is then submitted to EPDQ CPI later on in the agent like this;
out.print("<input type=\"hidden\" name=\"shipping\" value=\"");
out.println(hmParam.get("shipping") + "\">");
I want to do exactly the same thing here, except when I try the agent crashes with a null pointer exception. I can successfully iterate through the hashMap with the snippet below, so I know the data is present, but I can't understand why I can't use myHashMap.Get(key) to get each field value in the order I want them for the html form. The original agent in another application is still in use so what is going on? The data too is essentially unchanged String fieldnames mapped to String values.
Iterator it = cgiData.entrySet().iterator();
while (it.hasNext()) {
Map.Entry pairs = (Map.Entry)it.next();
out.println("<br />" + pairs.getKey() + " = " + pairs.getValue());
//System.out.println(pairs.getKey() + " = " + pairs.getValue());
}

I did two things that may have had an impact, in the process of trying to debug what was going on I needed these further imports;
import java.util.Iterator;
import java.util.Map;
Although I'm not iterating over the hashMap, I've left them in in case which gives me the option of dumping the hashMap out to my system audit trail when application is in production. In variations of the snippet below after it started working I was able to get to any of the data I needed, even if the value was Null, and toString() also seemed to be optional again, as it made no difference to the output.
String cgiValue = "";
cgiValue = hmParam.get("ship_to_lastname").toString();
out.println("<br />Lastname: " + cgiValue);
out.println("<br />Company name: " + hmParam.get("bill_to_company"));
out.println("<br />First name: " + hmParam.get("ship_to_firstname"));
The second thing I did, while trying to get code to work was I enabled the option "Compile Java code with debugging information" for the agent, this may have done something to the way the project was built within the Domino Developer client.
I think I have to put this down to some sort of internal error created when Domino Designer compiled the code. I had a major crash last night while working on this which necessitated a cold boot of my laptop. You also may find that when using Domino Designer 8.5.x that strange things can happen if you don't completely close down all the tasks from time to time with KillNotes

SVN log using SVNKit

I'm sure this question will be silly or annoying on multiple levels....
I am using SVNKit in Java.
I want to get the list of files committed in a particular commit. I have the release ID. Normally I would run something like
svn log url/to/repository -qv -r12345
And I would get the list of commands as normal.
I can't puzzle out how to do a similar thing in SVNKit. Any tips? :)

final SvnOperationFactory svnOperationFactory = new SvnOperationFactory();
final SvnLog log = svnOperationFactory.createLog();
log.setSingleTarget(SvnTarget.fromURL(url));
log.addRange(SvnRevisionRange.create(SVNRevision.create(12345), SVNRevision.create(12345)));
log.setDiscoverChangedPaths(true);
final SVNLogEntry logEntry = log.run();
final Map<String,SVNLogEntryPath> changedPaths = logEntry.getChangedPaths();
for (Map.Entry<String, SVNLogEntryPath> entry : changedPaths.entrySet()) {
final SVNLogEntryPath svnLogEntryPath = entry.getValue();
System.out.println(svnLogEntryPath.getType() + " " + svnLogEntryPath.getPath() +
(svnLogEntryPath.getCopyPath() == null ?
"" : (" from " + svnLogEntryPath.getCopyPath() + ":" + svnLogEntryPath.getCopyRevision())));
}
If you want to run one log request for a revision range, you should use log.setReceiver() call with your receiver implemetation.

Obtain a share UpdateKey from LinkedIn using LinkedIn J and getNetworkUpdates() with Coldfusion

Using the "Network Updates API" example at the following link I am able to post network updates with no problem using client.postNetworkUpdate(updateText).
http://code.google.com/p/linkedin-j/wiki/GettingStarted
So posting works great.. However posting an update does not return an "UpdateKey" which is used to retrieve stats for post itself such as comments, likes, etc. Without the UpdateKey I cannot retrieve stats. So what I would like to do is post, then retrieve the last post using the getNetworkUpdates() function, and in that retrieval will be the UpdateKey that I need to use later to retrieve stats. Here's a sample script in Java on how to get network updates, but I need to do this in Coldfusion instead of Java.
Network network = client.getNetworkUpdates(EnumSet.of(NetworkUpdateType.STATUS_UPDATE));
System.out.println("Total updates fetched:" + network.getUpdates().getTotal());
for (Update update : network.getUpdates().getUpdateList()) {
System.out.println("-------------------------------");
System.out.println(update.getUpdateKey() + ":" + update.getUpdateContent().getPerson().getFirstName() + " " + update.getUpdateContent().getPerson().getLastName() + "->" + update.getUpdateContent().getPerson().getCurrentStatus());
if (update.getUpdateComments() != null) {
System.out.println("Total comments fetched:" + update.getUpdateComments().getTotal());
for (UpdateComment comment : update.getUpdateComments().getUpdateCommentList()) {
System.out.println(comment.getPerson().getFirstName() + " " + comment.getPerson().getLastName() + "->" + comment.getComment());
}
}
}
Anyone have any thoughts on how to accomplish this using Coldfusion?
Thanks

I have not used that api, but I am guessing you could use the first two lines to grab the number of updates. Then use the overloaded client.getNetworkUpdates(start, end) method to retrieve the last update and obtain its key.
Totally untested, but something along these lines:
<cfscript>
...
// not sure about accessing the STATUS_UPDATE enum. One of these should work:
// method 1
STATUS_UPDATE = createObject("java", "com.google.code.linkedinapi.client.enumeration.NetworkUpdateType$STATUS_UPDATE");
// method 2
NetworkUpdateType = createObject("java", "com.google.code.linkedinapi.client.enumeration.NetworkUpdateType");
STATUS_UPDATE = NetworkUpdateType.valueOf("STATUS_UPDATE");
enumSet = createObject("java", "java.util.EnumSet");
network = yourClientObject.getNetworkUpdates(enumSet.of(STATUS_UPDATE));
numOfUpdates = network.getUpdates().getTotal();
// Add error handling in case numOfUpdates = 0
result = yourClientObject.getNetworkUpdates(numOfUpdates, numOfUpdates);
lastUpdate = result.getUpdates().getUpdateList().get(0);
key = lastUpdate.getUpdateKey();
</cfscript>

You can also use socialauth library to retrieve updates and post status on linkedin.
http://code.google.com/p/socialauth