Develop Reference

Regex pattern matching with multiple strings

Forgive me. I am not familiarized much with Regex patterns.
I have created a regex pattern as below.
String regex = Pattern.quote(value) + ", [NnoneOoff0-9\\-\\+\\/]+|[NnoneOoff0-9\\-\\+\\/]+, "
+ Pattern.quote(value);
This regex pattern is failing with 2 different set of strings.
value = "207e/160";
Use Case 1 -
When channelStr = "207e/160, 149/80"
Then channelStr.matches(regex), returns "true".
Use Case 2 -
When channelStr = "207e/160, 149/80, 11"
Then channelStr.matches(regex), returns "false".
Not able to figure out why? As far I can understand it may be because of the multiple spaces involved when more than 2 strings are present with separated by comma.
Not sure what should be correct pattern I should write for more than 2 strings.
Any help will be appreciated.

If you print your pattern, it is:
\Q207e/160\E, [NnoneOoff0-9\-\+\/]+|[NnoneOoff0-9\-\+\/]+, \Q207e/160\E
It consists of an alternation | matching a mandatory comma as well on the left as on the right side.
Using matches(), should match the whole string and that is the case for 207e/160, 149/80 so that is a match.
Only for this string 207e/160, 149/80, 11 there are 2 comma's, so you do get a partial match for the first part of the string, but you don't match the whole string so matches() returns false.
See the matches in this regex demo.
To match all the values, you can use a repeating pattern:
^[NnoeOf0-9+/-]+(?:,\h*[NnoeOf0-90+/-]+)*$
^ Start of string
[NnoeOf0-9\\+/-]+
(?: Non capture group
,\h* Match a comma and optional horizontal whitespace chars
[NnoeOf0-90-9\\+/-]+ Match 1+ any of the listed in the character class
)* Close the non capture group and optionally repeat it (if there should be at least 1 comma, then the quantifier can be + instead of *)
$ End of string
Regex demo
Example using matches():
String channelStr1 = "207e/160, 149/80";
String channelStr2 = "207e/160, 149/80, 11";
String regex = "^[NnoeOf0-9+/-]+(?:,\\h*[NnoeOf0-90+/-]+)*$";
System.out.println(channelStr1.matches(regex));
System.out.println(channelStr2.matches(regex));
Output
true
true
Note that in the character class you can put - at the end not having to escape it, and the + and / also does not have to be escaped.

You can use regex101 to test your RegEx. it has a description of everything that's going on to help with debugging. They have a quick reference section bottom right that you can use to figure out what you can do with examples and stuff.
A few things, you can add literals with \, so \" for a literal double quote.
If you want the pattern to be one or more of something, you would use +. These are called quantifiers and can be applied to groups, tokens, etc. The token for a whitespace character is \s. So, one or more whitespace characters would be \s+.
It's difficult to tell exactly what you're trying to do, but hopefully pointing you to regex101 will help. If you want to provide examples of the current RegEx you have, what you want to match and then the strings you're using to test it I'll be happy to provide you with an example.

^(?:[NnoneOoff0-9\\-\\+\\/]+ *(?:, *(?!$)|$))+$
^ Start
(?: ... ) Non-capturing group that defines an item and its separator. After each item, except the last, the separator (,) must appear. Spaces (one, several, or none) can appear before and after the comma, which is specified with *. This group can appear one or more times to the end of the string, as specified by the + quantifier after the group's closing parenthesis.
Regex101 Test

java regular expression and replace all occurrences

I want to replace one string in a big string, but my regular expression is not proper I guess. So it's not working.
Main string is
Some sql part which is to be replaced
cond = emp.EMAIL_ID = 'xx#xx.com' AND
emp.PERMANENT_ADDR LIKE('%98n%')
AND hemp.EMPLOYEE_NAME = 'xxx' and is_active='Y'
String to find and replace is
Based on some condition sql part to be replaced
hemp.EMPLOYEE_NAME = 'xxx'
I have tried this with
Pattern and Matcher class is used and
Pattern pat1 = Pattern.compile("/^hemp.EMPLOYEE_NAME\\s=\\s\'\\w\'\\s[and|or]*/$", Pattern.CASE_INSENSITIVE);
Matcher mat = pat1.matcher(cond);
while (mat.find()) {
System.out.println("Match: " + mat.group());
cond = mat.replaceFirst("xx "+mat.group()+"x");
mat = pat1.matcher(cond);
}
It's not working, not entering the loop at all. Any help is appreciated.

Obviously not - your regexp pattern doesn't make any sense.
The opening /: In some languages, regexps aren't strings and start with an opening slash. Java is not one of those languages, and it has nothing to do with regexps itself. So, this looks for a literal slash in that SQL, which isn't there, thus, failure.
^ is regexpese for 'start of string'. Your string does not start with hemp.EMPLOYEE_NAME, so that also doesn't work. Get rid of both / and ^ here.
\\s is one whitespace character (there are many whitespace characters - this matches any one of them, exactly one though). Your string doesn't have any spaces. Your intent, surely, was \\s* which matches 0 to many of them, i.e.: \\s* is: "Whitespace is allowed here". \\s is: There must be exactly one whitespace character here. Make all the \\s in your regexp an \\s*.
\\w is exactly one 'word' character (which is more or less a letter or digit), you obviously wanted \\w*.
[and|or] this is regexpese for: "An a, or an n, or a d, or an o, or an r, or a pipe symbol". Clearly you were looking for (and|or) which is regexpese for: Either the sequence "and", or the sequence "or".
* - so you want 0 to many 'and' or 'or', which makes no sense.
closing slash: You don't want this.
closing $: You don't want this - it means 'end of string'. Your string didn't end here.
The code itself:
replaceFirst, itself, also does regexps. You don't want to double apply this stuff. That's not how you replace a found result.
This is what you wanted:
Matcher mat = pat1.matcher(cond);
mat.replaceFirst("replacement goes here");
where replacement can include references to groups in the match if you want to take parts of what you matched (i.e. don't use mat.group(), use those references).
More generally did you read any regexp tutorial, did any testing, or did any reading of the javadoc of Pattern and Matcher?
I've been developing for a few years. It's just personal experience, perhaps, but, reading is pretty fundamental.

Instead of the anchors ^ and $, you can use word boundaries \b to prevent a partial match.
If you want to match spaces on the same line, you can use \h to match horizontal whitespace char, as \s can also match a newline.
You can use replaceFirst on the string using $0 to get the full match, and an inline modifier (?i) for a case insensitive match.
Note that using [and|or] is a character class matching one of the listed chars and escape the dot to match it literally, or else . matches any char except a newline.
(?i)\bhemp\.EMPLOYEE_NAME\h*=\h*'\w+'\h+(?:and|or)\b
See a regex demo or a Java demo
For example
String regex = "\\bhemp\\.EMPLOYEE_NAME\\h*=\\h*'\\w+'\\h+(?:and|or)\\b";
String string = "cond = emp.EMAIL_ID = 'xx#xx.com' AND\n"
+ "emp.PERMANENT_ADDR LIKE('%98n%') \n"
+ "AND hemp.EMPLOYEE_NAME = 'xxx' and is_active='Y'";
System.out.println(string.replaceFirst(regex, "xx$0x"));
Output
cond = emp.EMAIL_ID = 'xx#xx.com' AND
emp.PERMANENT_ADDR LIKE('%98n%')
AND xxhemp.EMPLOYEE_NAME = 'xxx' andx is_active='Y'

How do i check if string contains char sequence and backslash "\"?

I'm trying to get true in the following test. I have a string with the backslash, that for some reason doesn't recognized.
String s = "Good news\\ everyone!";
Boolean test = s.matches("(.*)news\\.");
System.out.println(test);
I've tried a lot of variants, but only one (.*)news(.*) works. But that actually means any characters after news, i need only with \.
How can i do that?

Group the elements at the end:(.*)news\\(.*)

You can use this instead :
Boolean test = s.matches("(.*)news\\\\(.*)");

Try something like:
Boolean test = s.matches(".*news\\\\.*");
Here .* means any number of characters followed by news, followed by double back slashes (escaped in a string) and then any number of characters after that (can be zero as well).
With your regex what it means is:
.* Any number of characters
news\\ - matches by "news\" (see one slash)
. followed by one character.
which doesn't satisfies for String in your program "Good news\ everyone!"

You are testing for an escaped occurrence of a literal dot: ".".
Refactor your pattern as follows (inferring the last part as you need it for a full match):
String s = "Good news\\ everyone!";
System.out.println(s.matches("(.*)news\\\\.*"));
Output
true
Explanation
The back-slash is used to escape characters and the back-slash itself in Java Strings
In Java Pattern representations, you need to double-escape your back-slashes for representing a literal back-slash ("\\\\"), as double-back-slashes are already used to represent special constructs (e.g. \\p{Punct}), or escape them (e.g. the literal dot \\.).
String.matches will attempt to match the whole String against your pattern, so you need the terminal part of the pattern I've added

you can try this :
String s = "Good news\\ everyone!";
Boolean test = s.matches("(.*)news\\\\(.*)");
System.out.println(test);

Check if String ends with two digits after a dot in Regular Expression?

I'm trying to test if a String ends with EXACTLY two digits after a dot in Java using a Regular Expression. How can achieve this?
Something like "500.23" should return true, while "50.3" or "50" should return false.
I tried things like "500.00".matches("/^[0-9]{2}$/") but it returns false.

Here is a RegEx that might help you:
^\d+\.\d{2,2}$
it may neither be perfect nor the most efficient, but it should lead you in the right direction.
^ says that the expression should start here
\d looks for any digit
+ says, that the leading \d can appear as often as necessary (1–infinity)
\. means you are expecting a dot(.) at one point
\d{2,2} thats the trick: it says you want 2 and exactly 2 digits (not less not more)
$ tells you that the expression ends there (after the 2 digits)
in Java the \ needs to be escaped so it would be:
^\\d*\\.\\d{2,2}$
Edit
if you don't need digits before the dot (.) or if you really don't care what comes before the dot, then you can replace the first \d+ by a .* as in Bohemians answer. The (non escaped) dot means that the expression can contain any character (not only digets). Then even the leading ^ might no longer be necessary.
\\.*\\.\\d{2,2}$

use this regex
String s="987234.42";
if(Pattern.matches("^\\d+(\\.\\d{2})$", s)){ // string must start with digit followed by .(dot) then exactly two digit.
....
}

Firstly, forward slashes are no part of regular expressions whatsoever. They are however used by some languages to delimit regular expressions - but not java, so don't use them.
Secondly, in java matches() must match the whole string to return true (so ^ and $ are implied in the regex).
Try this:
if (str.matches(".*\\.\\d\\d"))
// it ends with dot then 2 digits
Note that in java a bash slash in a regex requires escaping by a further back slash in a string literal.

Regexp: Specific characters in the text

My goal is to validate specific characters (*,^,+,?,$,[],[^]) in the some text, like:
?test.test => true
test.test => false
test^test => true
test:test => false
test-test$ => true
test-test => false
I've already created regex regarding to requirment above, but I am not sure in this.
^(.*)([\[\]\^\$\?\*\+])(.*)$
Will be good to know whether it can be optimized in such way.

Your regex is already optimized one as its very simple. You can make is much simpler or readable only.
Also if you use the matches() method of Java's String class then you'll not require the ^ and $ at the both ends.
.*([\\[\\]^$?*+]).*
Double slashes(\\) for Java, otherwise please use single slash(\).
Look, I have removed the captures () along with escape character \ for the characters ^$?*+ as they are inside the character class [].

TL;DR
The quickest regex to do the job is
# ^[^\]\[^$?*+]*([\]\[^$?*+])
^ #start of the string
[^ #any character BUT...
\]\[^$?*+ #...these ones (^$?*+ aren't special inside a character class)
]*+ #zero or more times (possessive quantifier)
([ #capture any of...
\]\[^$?*+ #...these characters
])
Be careful that in a java string, you need to escape the \ as well, so you should transform every \ into \\.
Discussion
At first two regex come in mind:
[\]\[^$?*+], which will match only the character you want inside the string.
^.*[\]\[^$?*+], which will match your string up to the desired character.
It's actually important performance-wise to understand the difference between the case with .* at the beginning and the one with no wildcard at all.
When searching for the pattern, the first .* will make the regex engine eat all the string, then backtrack character by character to see if it's a match for your character range [...]. So the regex will actually search from the end of the string.
This is an advantage when your wanted sign if near the end, a disadvantage when it is at the beginning.
On the other case, the regex engine will try every character, beginning from the left, until it matches what you want.
You can see what I mean with these two examples from the excellent regex101.com:
with the .*, match is found in 26 steps when near the beginning, 8 when it's near the beginning: http://regex101.com/r/oI3pS1/#debugger
without it, it is found in 5 steps when near the beginning and 23 when near the end
Now, if you want to combine these two approaches you can use the tl;dr answer: you eat everything that isn't your character, then you match your character (or fail if there isn't one).
On our example, it takes 7 steps wherever your character is in the string (and 7 steps even if there is no character, thanks to the possessive quantifier).

That should also work:
String regex = ".*[\\[\\]^$?*+].*";
String test1 = "?test.test";
String test2 = "test.test";
String test3 = "test^test";
String test4 = "test:test";
String test5 = "test-test$";
String test6 = "test-test";
System.out.println(test1.matches(regex));
System.out.println(test2.matches(regex));
System.out.println(test3.matches(regex));
System.out.println(test4.matches(regex));
System.out.println(test5.matches(regex));
System.out.println(test6.matches(regex));