Develop Reference

Change contentpane of Frame after button clicked - java

I want to be able to set a JFrame's contentpane after a button inside one of that frame's JPanels has been clicked.
My architecture consists of a controller which creates the JFrame and the first JPanel inside of it. From within the first JPanel I'm calling a method: setcontentpane(JPanel jpanel) on the controller. However, instead of loading the passed JPanel it does nothing but removing all Panels (see code below)
ActionListener inside of the first JPanel:
public void actionPerformed(ActionEvent arg0) {
controller.setpanel(new CustomPanel(string1, string2));
}
Controller:
JFrame frame;
public void setpanel(JPanel panel)
{
frame.getContentPane().removeAll();
frame.getContentPane().add(panel);
frame.repaint();
}
public Controller(JFrame frame)
{
this.frame=frame;
}
Can anyone tell me what I'm doing wrong? Thanks :)

Call revalidate, then repaint. This tells the layout managers to do their layouts of their components:
JPanel contentPane = (JPanel) frame.getContentPane();
contentPane.removeAll();
contentPane.add(panel);
contentPane.revalidate();
contentPane.repaint();
Better though if you just want to swap JPanels is to use a CardLayout and have it do the dirty work.

I found a way to do what I outlined above.
Implementing the setpanel method like this:
public void setpanel(JPanel panel)
{
frame.setContentPane(panel);
frame.validate();
}
did the trick in my case.
I'm sure that I still need to fix something within my code, since pack() still shrinks the window, but at least the method posted above works.

Whenever you change a frame's containment hierarchy, you have to call pack().
From the docs:
Causes this Window to be sized to fit
the preferred size and layouts of its
subcomponents. [...] The Window will
be validated after the preferredSize
is calculated.

Related

To put it simple, there's a simple java swing app that consists of JFrame with some components in it. One of the components is a JPanel that is meant to be replaced by another JPanel on user action.
So, what's the correct way of doing such a thing? I've tried
panel = new CustomJPanelWithComponentsOnIt();
parentFrameJPanelBelongsTo.pack();
but this won't work. What would you suggest?

Your use case, seems perfect for CardLayout.
In card layout you can add multiple panels in the same place, but then show or hide, one panel at a time.

1) Setting the first Panel:
JFrame frame=new JFrame();
frame.getContentPane().add(new JPanel());
2)Replacing the panel:
frame.getContentPane().removeAll();
frame.getContentPane().add(new JPanel());
Also notice that you must do this in the Event's Thread, to ensure this use the SwingUtilities.invokeLater or the SwingWorker

frame.setContentPane(newContents());
frame.revalidate(); // frame.pack() if you want to resize.
Remember, Java use 'copy reference by value' argument passing. So changing a variable wont change copies of the reference passed to other methods.
Also note JFrame is very confusing in the name of usability. Adding a component or setting a layout (usually) performs the operation on the content pane. Oddly enough, getting the layout really does give you the frame's layout manager.

Hope this piece of code give you an idea of changing jPanels inside a JFrame.
public class PanelTest extends JFrame {
Container contentPane;
public PanelTest() {
super("Changing JPanel inside a JFrame");
contentPane=getContentPane();
}
public void createChangePanel() {
contentPane.removeAll();
JPanel newPanel=new JPanel();
contentPane.add(newPanel);
System.out.println("new panel created");//for debugging purposes
validate();
setVisible(true);
}
}

On the user action:
// you have to do something along the lines of
myJFrame.getContentPane().removeAll()
myJFrame.getContentPane().invalidate()
myJFrame.getContentPane().add(newContentPanel)
myJFrame.getContentPane().revalidate()
Then you can resize your wndow as needed.

Game game = new Game();
getContentPane().removeAll();
setContentPane(game);
getContentPane().revalidate(); //IMPORTANT
getContentPane().repaint(); //IMPORTANT

It all depends on how its going to be used. If you will want to switch back and forth between these two panels then use a CardLayout. If you are only switching from the first to the second once and (and not going back) then I would use telcontars suggestion and just replace it. Though if the JPanel isn't the only thing in your frame I would use
remove(java.awt.Component) instead of removeAll.
If you are somewhere in between these two cases its basically a time-space tradeoff. The CardLayout will save you time but take up more memory by having to keep this whole other panel in memory at all times. But if you just replace the panel when needed and construct it on demand, you don't have to keep that meory around but it takes more time to switch.
Also you can try a JTabbedPane to use tabs instead (its even easier than CardLayout because it handles the showing/hiding automitically)

The other individuals answered the question. I want to suggest you use a JTabbedPane instead of replacing content. As a general rule, it is bad to have visual elements of your application disappear or be replaced by other content. Certainly there are exceptions to every rule, and only you and your user community can decide the best approach.

Problem: My component does not appear after I have added it to the container.
You need to invoke revalidate and repaint after adding a component before it will show up in your container.
Source: http://docs.oracle.com/javase/tutorial/uiswing/layout/problems.html

I was having exactly the same problem!! Increadible!! The solution I found was:
Adding all the components (JPanels) to the container;
Using the setVisible(false) method to all of them;
On user action, setting setVisible(true) to the panel I wanted to
show.
// Hiding all components (JPanels) added to a container (ex: another JPanel)
for (Component component : this.container.getComponents()) {
component.setVisible(false);
}
// Showing only the selected JPanel, the one user wants to see
panel.setVisible(true);
No revalidate(), no validate(), no CardLayout needed.

The layout.replace() answer only exists/works on the GroupLayout Manager.
Other LayoutManagers (CardLayout, BoxLayout etc) do NOT support this feature, but require you to first RemoveLayoutComponent( and then AddLayoutComponent( back again. :-) [Just setting the record straight]

I suggest you to add both panel at frame creation, then change the visible panel by calling setVisible(true/false) on both.
When calling setVisible, the parent will be notified and asked to repaint itself.

class Frame1 extends javax.swing.JFrame {
remove(previouspanel); //or getContentPane().removeAll();
add(newpanel); //or setContentPane(newpanel);
invalidate(); validate(); // or ((JComponent) getContentPane()).revalidate();
repaint(); //DO NOT FORGET REPAINT
}
Sometimes you can do the work without using the revalidation and sometimes without using the repaint.My advise use both.

Just call the method pack() after setting the ContentPane, (java 1.7, maybe older) like this:
JFrame frame = new JFrame();
JPanel panel1 = new JPanel();
JPanel panel2 = new JPanel();
....
frame.setContentPane(panel1);
frame.pack();
...
frame.setContentPane(panel2);
frame.pack();
...

To put it simple, there's a simple java swing app that consists of JFrame with some components in it. One of the components is a JPanel that is meant to be replaced by another JPanel on user action.
So, what's the correct way of doing such a thing? I've tried
panel = new CustomJPanelWithComponentsOnIt();
parentFrameJPanelBelongsTo.pack();
but this won't work. What would you suggest?

Your use case, seems perfect for CardLayout.
In card layout you can add multiple panels in the same place, but then show or hide, one panel at a time.

1) Setting the first Panel:
JFrame frame=new JFrame();
frame.getContentPane().add(new JPanel());
2)Replacing the panel:
frame.getContentPane().removeAll();
frame.getContentPane().add(new JPanel());
Also notice that you must do this in the Event's Thread, to ensure this use the SwingUtilities.invokeLater or the SwingWorker

frame.setContentPane(newContents());
frame.revalidate(); // frame.pack() if you want to resize.
Remember, Java use 'copy reference by value' argument passing. So changing a variable wont change copies of the reference passed to other methods.
Also note JFrame is very confusing in the name of usability. Adding a component or setting a layout (usually) performs the operation on the content pane. Oddly enough, getting the layout really does give you the frame's layout manager.

Hope this piece of code give you an idea of changing jPanels inside a JFrame.
public class PanelTest extends JFrame {
Container contentPane;
public PanelTest() {
super("Changing JPanel inside a JFrame");
contentPane=getContentPane();
}
public void createChangePanel() {
contentPane.removeAll();
JPanel newPanel=new JPanel();
contentPane.add(newPanel);
System.out.println("new panel created");//for debugging purposes
validate();
setVisible(true);
}
}

On the user action:
// you have to do something along the lines of
myJFrame.getContentPane().removeAll()
myJFrame.getContentPane().invalidate()
myJFrame.getContentPane().add(newContentPanel)
myJFrame.getContentPane().revalidate()
Then you can resize your wndow as needed.

Game game = new Game();
getContentPane().removeAll();
setContentPane(game);
getContentPane().revalidate(); //IMPORTANT
getContentPane().repaint(); //IMPORTANT

It all depends on how its going to be used. If you will want to switch back and forth between these two panels then use a CardLayout. If you are only switching from the first to the second once and (and not going back) then I would use telcontars suggestion and just replace it. Though if the JPanel isn't the only thing in your frame I would use
remove(java.awt.Component) instead of removeAll.
If you are somewhere in between these two cases its basically a time-space tradeoff. The CardLayout will save you time but take up more memory by having to keep this whole other panel in memory at all times. But if you just replace the panel when needed and construct it on demand, you don't have to keep that meory around but it takes more time to switch.
Also you can try a JTabbedPane to use tabs instead (its even easier than CardLayout because it handles the showing/hiding automitically)

The other individuals answered the question. I want to suggest you use a JTabbedPane instead of replacing content. As a general rule, it is bad to have visual elements of your application disappear or be replaced by other content. Certainly there are exceptions to every rule, and only you and your user community can decide the best approach.

Problem: My component does not appear after I have added it to the container.
You need to invoke revalidate and repaint after adding a component before it will show up in your container.
Source: http://docs.oracle.com/javase/tutorial/uiswing/layout/problems.html

I was having exactly the same problem!! Increadible!! The solution I found was:
Adding all the components (JPanels) to the container;
Using the setVisible(false) method to all of them;
On user action, setting setVisible(true) to the panel I wanted to
show.
// Hiding all components (JPanels) added to a container (ex: another JPanel)
for (Component component : this.container.getComponents()) {
component.setVisible(false);
}
// Showing only the selected JPanel, the one user wants to see
panel.setVisible(true);
No revalidate(), no validate(), no CardLayout needed.

The layout.replace() answer only exists/works on the GroupLayout Manager.
Other LayoutManagers (CardLayout, BoxLayout etc) do NOT support this feature, but require you to first RemoveLayoutComponent( and then AddLayoutComponent( back again. :-) [Just setting the record straight]

I suggest you to add both panel at frame creation, then change the visible panel by calling setVisible(true/false) on both.
When calling setVisible, the parent will be notified and asked to repaint itself.

class Frame1 extends javax.swing.JFrame {
remove(previouspanel); //or getContentPane().removeAll();
add(newpanel); //or setContentPane(newpanel);
invalidate(); validate(); // or ((JComponent) getContentPane()).revalidate();
repaint(); //DO NOT FORGET REPAINT
}
Sometimes you can do the work without using the revalidation and sometimes without using the repaint.My advise use both.

Just call the method pack() after setting the ContentPane, (java 1.7, maybe older) like this:
JFrame frame = new JFrame();
JPanel panel1 = new JPanel();
JPanel panel2 = new JPanel();
....
frame.setContentPane(panel1);
frame.pack();
...
frame.setContentPane(panel2);
frame.pack();
...

To put it simple, there's a simple java swing app that consists of JFrame with some components in it. One of the components is a JPanel that is meant to be replaced by another JPanel on user action.
So, what's the correct way of doing such a thing? I've tried
panel = new CustomJPanelWithComponentsOnIt();
parentFrameJPanelBelongsTo.pack();
but this won't work. What would you suggest?

Your use case, seems perfect for CardLayout.
In card layout you can add multiple panels in the same place, but then show or hide, one panel at a time.

1) Setting the first Panel:
JFrame frame=new JFrame();
frame.getContentPane().add(new JPanel());
2)Replacing the panel:
frame.getContentPane().removeAll();
frame.getContentPane().add(new JPanel());
Also notice that you must do this in the Event's Thread, to ensure this use the SwingUtilities.invokeLater or the SwingWorker

frame.setContentPane(newContents());
frame.revalidate(); // frame.pack() if you want to resize.
Remember, Java use 'copy reference by value' argument passing. So changing a variable wont change copies of the reference passed to other methods.
Also note JFrame is very confusing in the name of usability. Adding a component or setting a layout (usually) performs the operation on the content pane. Oddly enough, getting the layout really does give you the frame's layout manager.

Hope this piece of code give you an idea of changing jPanels inside a JFrame.
public class PanelTest extends JFrame {
Container contentPane;
public PanelTest() {
super("Changing JPanel inside a JFrame");
contentPane=getContentPane();
}
public void createChangePanel() {
contentPane.removeAll();
JPanel newPanel=new JPanel();
contentPane.add(newPanel);
System.out.println("new panel created");//for debugging purposes
validate();
setVisible(true);
}
}

On the user action:
// you have to do something along the lines of
myJFrame.getContentPane().removeAll()
myJFrame.getContentPane().invalidate()
myJFrame.getContentPane().add(newContentPanel)
myJFrame.getContentPane().revalidate()
Then you can resize your wndow as needed.

Game game = new Game();
getContentPane().removeAll();
setContentPane(game);
getContentPane().revalidate(); //IMPORTANT
getContentPane().repaint(); //IMPORTANT

It all depends on how its going to be used. If you will want to switch back and forth between these two panels then use a CardLayout. If you are only switching from the first to the second once and (and not going back) then I would use telcontars suggestion and just replace it. Though if the JPanel isn't the only thing in your frame I would use
remove(java.awt.Component) instead of removeAll.
If you are somewhere in between these two cases its basically a time-space tradeoff. The CardLayout will save you time but take up more memory by having to keep this whole other panel in memory at all times. But if you just replace the panel when needed and construct it on demand, you don't have to keep that meory around but it takes more time to switch.
Also you can try a JTabbedPane to use tabs instead (its even easier than CardLayout because it handles the showing/hiding automitically)

The other individuals answered the question. I want to suggest you use a JTabbedPane instead of replacing content. As a general rule, it is bad to have visual elements of your application disappear or be replaced by other content. Certainly there are exceptions to every rule, and only you and your user community can decide the best approach.

Problem: My component does not appear after I have added it to the container.
You need to invoke revalidate and repaint after adding a component before it will show up in your container.
Source: http://docs.oracle.com/javase/tutorial/uiswing/layout/problems.html

I was having exactly the same problem!! Increadible!! The solution I found was:
Adding all the components (JPanels) to the container;
Using the setVisible(false) method to all of them;
On user action, setting setVisible(true) to the panel I wanted to
show.
// Hiding all components (JPanels) added to a container (ex: another JPanel)
for (Component component : this.container.getComponents()) {
component.setVisible(false);
}
// Showing only the selected JPanel, the one user wants to see
panel.setVisible(true);
No revalidate(), no validate(), no CardLayout needed.

The layout.replace() answer only exists/works on the GroupLayout Manager.
Other LayoutManagers (CardLayout, BoxLayout etc) do NOT support this feature, but require you to first RemoveLayoutComponent( and then AddLayoutComponent( back again. :-) [Just setting the record straight]

I suggest you to add both panel at frame creation, then change the visible panel by calling setVisible(true/false) on both.
When calling setVisible, the parent will be notified and asked to repaint itself.

class Frame1 extends javax.swing.JFrame {
remove(previouspanel); //or getContentPane().removeAll();
add(newpanel); //or setContentPane(newpanel);
invalidate(); validate(); // or ((JComponent) getContentPane()).revalidate();
repaint(); //DO NOT FORGET REPAINT
}
Sometimes you can do the work without using the revalidation and sometimes without using the repaint.My advise use both.

Just call the method pack() after setting the ContentPane, (java 1.7, maybe older) like this:
JFrame frame = new JFrame();
JPanel panel1 = new JPanel();
JPanel panel2 = new JPanel();
....
frame.setContentPane(panel1);
frame.pack();
...
frame.setContentPane(panel2);
frame.pack();
...

To put it simple, there's a simple java swing app that consists of JFrame with some components in it. One of the components is a JPanel that is meant to be replaced by another JPanel on user action.
So, what's the correct way of doing such a thing? I've tried
panel = new CustomJPanelWithComponentsOnIt();
parentFrameJPanelBelongsTo.pack();
but this won't work. What would you suggest?

Your use case, seems perfect for CardLayout.
In card layout you can add multiple panels in the same place, but then show or hide, one panel at a time.

1) Setting the first Panel:
JFrame frame=new JFrame();
frame.getContentPane().add(new JPanel());
2)Replacing the panel:
frame.getContentPane().removeAll();
frame.getContentPane().add(new JPanel());
Also notice that you must do this in the Event's Thread, to ensure this use the SwingUtilities.invokeLater or the SwingWorker

frame.setContentPane(newContents());
frame.revalidate(); // frame.pack() if you want to resize.
Remember, Java use 'copy reference by value' argument passing. So changing a variable wont change copies of the reference passed to other methods.
Also note JFrame is very confusing in the name of usability. Adding a component or setting a layout (usually) performs the operation on the content pane. Oddly enough, getting the layout really does give you the frame's layout manager.

Hope this piece of code give you an idea of changing jPanels inside a JFrame.
public class PanelTest extends JFrame {
Container contentPane;
public PanelTest() {
super("Changing JPanel inside a JFrame");
contentPane=getContentPane();
}
public void createChangePanel() {
contentPane.removeAll();
JPanel newPanel=new JPanel();
contentPane.add(newPanel);
System.out.println("new panel created");//for debugging purposes
validate();
setVisible(true);
}
}

On the user action:
// you have to do something along the lines of
myJFrame.getContentPane().removeAll()
myJFrame.getContentPane().invalidate()
myJFrame.getContentPane().add(newContentPanel)
myJFrame.getContentPane().revalidate()
Then you can resize your wndow as needed.

Game game = new Game();
getContentPane().removeAll();
setContentPane(game);
getContentPane().revalidate(); //IMPORTANT
getContentPane().repaint(); //IMPORTANT

It all depends on how its going to be used. If you will want to switch back and forth between these two panels then use a CardLayout. If you are only switching from the first to the second once and (and not going back) then I would use telcontars suggestion and just replace it. Though if the JPanel isn't the only thing in your frame I would use
remove(java.awt.Component) instead of removeAll.
If you are somewhere in between these two cases its basically a time-space tradeoff. The CardLayout will save you time but take up more memory by having to keep this whole other panel in memory at all times. But if you just replace the panel when needed and construct it on demand, you don't have to keep that meory around but it takes more time to switch.
Also you can try a JTabbedPane to use tabs instead (its even easier than CardLayout because it handles the showing/hiding automitically)

The other individuals answered the question. I want to suggest you use a JTabbedPane instead of replacing content. As a general rule, it is bad to have visual elements of your application disappear or be replaced by other content. Certainly there are exceptions to every rule, and only you and your user community can decide the best approach.

Problem: My component does not appear after I have added it to the container.
You need to invoke revalidate and repaint after adding a component before it will show up in your container.
Source: http://docs.oracle.com/javase/tutorial/uiswing/layout/problems.html

I was having exactly the same problem!! Increadible!! The solution I found was:
Adding all the components (JPanels) to the container;
Using the setVisible(false) method to all of them;
On user action, setting setVisible(true) to the panel I wanted to
show.
// Hiding all components (JPanels) added to a container (ex: another JPanel)
for (Component component : this.container.getComponents()) {
component.setVisible(false);
}
// Showing only the selected JPanel, the one user wants to see
panel.setVisible(true);
No revalidate(), no validate(), no CardLayout needed.

The layout.replace() answer only exists/works on the GroupLayout Manager.
Other LayoutManagers (CardLayout, BoxLayout etc) do NOT support this feature, but require you to first RemoveLayoutComponent( and then AddLayoutComponent( back again. :-) [Just setting the record straight]

I suggest you to add both panel at frame creation, then change the visible panel by calling setVisible(true/false) on both.
When calling setVisible, the parent will be notified and asked to repaint itself.

class Frame1 extends javax.swing.JFrame {
remove(previouspanel); //or getContentPane().removeAll();
add(newpanel); //or setContentPane(newpanel);
invalidate(); validate(); // or ((JComponent) getContentPane()).revalidate();
repaint(); //DO NOT FORGET REPAINT
}
Sometimes you can do the work without using the revalidation and sometimes without using the repaint.My advise use both.

Just call the method pack() after setting the ContentPane, (java 1.7, maybe older) like this:
JFrame frame = new JFrame();
JPanel panel1 = new JPanel();
JPanel panel2 = new JPanel();
....
frame.setContentPane(panel1);
frame.pack();
...
frame.setContentPane(panel2);
frame.pack();
...

To put it simple, there's a simple java swing app that consists of JFrame with some components in it. One of the components is a JPanel that is meant to be replaced by another JPanel on user action.
So, what's the correct way of doing such a thing? I've tried
panel = new CustomJPanelWithComponentsOnIt();
parentFrameJPanelBelongsTo.pack();
but this won't work. What would you suggest?

Your use case, seems perfect for CardLayout.
In card layout you can add multiple panels in the same place, but then show or hide, one panel at a time.

1) Setting the first Panel:
JFrame frame=new JFrame();
frame.getContentPane().add(new JPanel());
2)Replacing the panel:
frame.getContentPane().removeAll();
frame.getContentPane().add(new JPanel());
Also notice that you must do this in the Event's Thread, to ensure this use the SwingUtilities.invokeLater or the SwingWorker

frame.setContentPane(newContents());
frame.revalidate(); // frame.pack() if you want to resize.
Remember, Java use 'copy reference by value' argument passing. So changing a variable wont change copies of the reference passed to other methods.
Also note JFrame is very confusing in the name of usability. Adding a component or setting a layout (usually) performs the operation on the content pane. Oddly enough, getting the layout really does give you the frame's layout manager.

Hope this piece of code give you an idea of changing jPanels inside a JFrame.
public class PanelTest extends JFrame {
Container contentPane;
public PanelTest() {
super("Changing JPanel inside a JFrame");
contentPane=getContentPane();
}
public void createChangePanel() {
contentPane.removeAll();
JPanel newPanel=new JPanel();
contentPane.add(newPanel);
System.out.println("new panel created");//for debugging purposes
validate();
setVisible(true);
}
}

On the user action:
// you have to do something along the lines of
myJFrame.getContentPane().removeAll()
myJFrame.getContentPane().invalidate()
myJFrame.getContentPane().add(newContentPanel)
myJFrame.getContentPane().revalidate()
Then you can resize your wndow as needed.

Game game = new Game();
getContentPane().removeAll();
setContentPane(game);
getContentPane().revalidate(); //IMPORTANT
getContentPane().repaint(); //IMPORTANT

It all depends on how its going to be used. If you will want to switch back and forth between these two panels then use a CardLayout. If you are only switching from the first to the second once and (and not going back) then I would use telcontars suggestion and just replace it. Though if the JPanel isn't the only thing in your frame I would use
remove(java.awt.Component) instead of removeAll.
If you are somewhere in between these two cases its basically a time-space tradeoff. The CardLayout will save you time but take up more memory by having to keep this whole other panel in memory at all times. But if you just replace the panel when needed and construct it on demand, you don't have to keep that meory around but it takes more time to switch.
Also you can try a JTabbedPane to use tabs instead (its even easier than CardLayout because it handles the showing/hiding automitically)

The other individuals answered the question. I want to suggest you use a JTabbedPane instead of replacing content. As a general rule, it is bad to have visual elements of your application disappear or be replaced by other content. Certainly there are exceptions to every rule, and only you and your user community can decide the best approach.

Problem: My component does not appear after I have added it to the container.
You need to invoke revalidate and repaint after adding a component before it will show up in your container.
Source: http://docs.oracle.com/javase/tutorial/uiswing/layout/problems.html

I was having exactly the same problem!! Increadible!! The solution I found was:
Adding all the components (JPanels) to the container;
Using the setVisible(false) method to all of them;
On user action, setting setVisible(true) to the panel I wanted to
show.
// Hiding all components (JPanels) added to a container (ex: another JPanel)
for (Component component : this.container.getComponents()) {
component.setVisible(false);
}
// Showing only the selected JPanel, the one user wants to see
panel.setVisible(true);
No revalidate(), no validate(), no CardLayout needed.

The layout.replace() answer only exists/works on the GroupLayout Manager.
Other LayoutManagers (CardLayout, BoxLayout etc) do NOT support this feature, but require you to first RemoveLayoutComponent( and then AddLayoutComponent( back again. :-) [Just setting the record straight]

I suggest you to add both panel at frame creation, then change the visible panel by calling setVisible(true/false) on both.
When calling setVisible, the parent will be notified and asked to repaint itself.

class Frame1 extends javax.swing.JFrame {
remove(previouspanel); //or getContentPane().removeAll();
add(newpanel); //or setContentPane(newpanel);
invalidate(); validate(); // or ((JComponent) getContentPane()).revalidate();
repaint(); //DO NOT FORGET REPAINT
}
Sometimes you can do the work without using the revalidation and sometimes without using the repaint.My advise use both.

Just call the method pack() after setting the ContentPane, (java 1.7, maybe older) like this:
JFrame frame = new JFrame();
JPanel panel1 = new JPanel();
JPanel panel2 = new JPanel();
....
frame.setContentPane(panel1);
frame.pack();
...
frame.setContentPane(panel2);
frame.pack();
...