Comparing resultsets in jdbc

Comparing resultsets in jdbc - java

In my java code i have two resultsets rs1 and rs2 obtained as follows :
rs1 = statement.executeQuery("select * from tableA")
rs2 = statement.executeQuery("select * from tableB")
Both the tables have the same schema consisting of field ID,Name and Address and i want to compare the two resultsets. Can i directly do rs1 == rs2 ?. If no how should i go about comparing the two resultsets ?.
Some example would be really appreciated.
Thank You

This code checks all the columns of two resultsets, and also the number of rows must be equal in them.
int col = 1;
while (rs1.next() && rs2.next()) {
final Object res1 = rs1.getObject(col);
final Object res2 = rs2.getObject(col);
// Check values
if (!res1.equals(res2)) {
throw new RuntimeException(String.format("%s and %s aren't equal at common position %d",
res1, res2, col));
}
// rs1 and rs2 must reach last row in the same iteration
if ((rs1.isLast() != rs2.isLast())) {
throw new RuntimeException("The two ResultSets contains different number of columns!");
}
col++;
}

With JDBC, you will have to iterate over both ResultSet objects and compare every field in them.
If you can do it with SQL, then I'd try
select * from tableA
except -- or minus in oracle
select * from tableB
and
select * from tableB
except -- or minus in oracle
select * from tableA
Both should return an empty result
If using a library is an option for you, you could try jOOQ (I work for the company behind jOOQ). jOOQ wraps many useful features around JDBC. With jOOQ, you could run
Result<Record> r1 = create.fetch("select * from tableA");
Result<Record> r2 = create.fetch("select * from tableB");
or also:
r1 = create.fetch(rs1);
r2 = create.fetch(rs2);
And then
if (r1.equals(r2)) {
// the results are equal
}
else {
// the results are not equal
}

rs1 and rs2 wont be the same objects, so comparing them is rather senseless.
I guess you want to compare the content of the resultsets.
You may get the table scheme from the metadata by rs1.getMetaData().

As rs1 & rs2 are different objects, they point to different memory location, hence comparison of rs1 & rs2 is not proper, rather you use, the code below :-
while (rs.next()&& rs1.next())
{
int userId = rs.getInt("userId")
int userId1 = rs1.getInt("userId")
if(userId == userId1){
// do some thing
}
}

Related

How to generate and fill IN clause? [duplicate]

What are the best workarounds for using a SQL IN clause with instances of java.sql.PreparedStatement, which is not supported for multiple values due to SQL injection attack security issues: One ? placeholder represents one value, rather than a list of values.
Consider the following SQL statement:
SELECT my_column FROM my_table where search_column IN (?)
Using preparedStatement.setString( 1, "'A', 'B', 'C'" ); is essentially a non-working attempt at a workaround of the reasons for using ? in the first place.
What workarounds are available?

An analysis of the various options available, and the pros and cons of each is available in Jeanne Boyarsky's Batching Select Statements in JDBC entry on JavaRanch Journal.
The suggested options are:
Prepare SELECT my_column FROM my_table WHERE search_column = ?, execute it for each value and UNION the results client-side. Requires only one prepared statement. Slow and painful.
Prepare SELECT my_column FROM my_table WHERE search_column IN (?,?,?) and execute it. Requires one prepared statement per size-of-IN-list. Fast and obvious.
Prepare SELECT my_column FROM my_table WHERE search_column = ? ; SELECT my_column FROM my_table WHERE search_column = ? ; ... and execute it. [Or use UNION ALL in place of those semicolons. --ed] Requires one prepared statement per size-of-IN-list. Stupidly slow, strictly worse than WHERE search_column IN (?,?,?), so I don't know why the blogger even suggested it.
Use a stored procedure to construct the result set.
Prepare N different size-of-IN-list queries; say, with 2, 10, and 50 values. To search for an IN-list with 6 different values, populate the size-10 query so that it looks like SELECT my_column FROM my_table WHERE search_column IN (1,2,3,4,5,6,6,6,6,6). Any decent server will optimize out the duplicate values before running the query.
None of these options are ideal.
The best option if you are using JDBC4 and a server that supports x = ANY(y), is to use PreparedStatement.setArray as described in Boris's anwser.
There doesn't seem to be any way to make setArray work with IN-lists, though.
Sometimes SQL statements are loaded at runtime (e.g., from a properties file) but require a variable number of parameters. In such cases, first define the query:
query=SELECT * FROM table t WHERE t.column IN (?)
Next, load the query. Then determine the number of parameters prior to running it. Once the parameter count is known, run:
sql = any( sql, count );
For example:
/**
* Converts a SQL statement containing exactly one IN clause to an IN clause
* using multiple comma-delimited parameters.
*
* #param sql The SQL statement string with one IN clause.
* #param params The number of parameters the SQL statement requires.
* #return The SQL statement with (?) replaced with multiple parameter
* placeholders.
*/
public static String any(String sql, final int params) {
// Create a comma-delimited list based on the number of parameters.
final StringBuilder sb = new StringBuilder(
String.join(", ", Collections.nCopies(possibleValue.size(), "?")));
// For more than 1 parameter, replace the single parameter with
// multiple parameter placeholders.
if (sb.length() > 1) {
sql = sql.replace("(?)", "(" + sb + ")");
}
// Return the modified comma-delimited list of parameters.
return sql;
}
For certain databases where passing an array via the JDBC 4 specification is unsupported, this method can facilitate transforming the slow = ? into the faster IN (?) clause condition, which can then be expanded by calling the any method.

Solution for PostgreSQL:
final PreparedStatement statement = connection.prepareStatement(
"SELECT my_column FROM my_table where search_column = ANY (?)"
);
final String[] values = getValues();
statement.setArray(1, connection.createArrayOf("text", values));
try (ResultSet rs = statement.executeQuery()) {
while(rs.next()) {
// do some...
}
}
or
final PreparedStatement statement = connection.prepareStatement(
"SELECT my_column FROM my_table " +
"where search_column IN (SELECT * FROM unnest(?))"
);
final String[] values = getValues();
statement.setArray(1, connection.createArrayOf("text", values));
try (ResultSet rs = statement.executeQuery()) {
while(rs.next()) {
// do some...
}
}

No simple way AFAIK.
If the target is to keep statement cache ratio high (i.e to not create a statement per every parameter count), you may do the following:
create a statement with a few (e.g. 10) parameters:
... WHERE A IN (?,?,?,?,?,?,?,?,?,?) ...
Bind all actuall parameters
setString(1,"foo");
setString(2,"bar");
Bind the rest as NULL
setNull(3,Types.VARCHAR)
...
setNull(10,Types.VARCHAR)
NULL never matches anything, so it gets optimized out by the SQL plan builder.
The logic is easy to automate when you pass a List into a DAO function:
while( i < param.size() ) {
ps.setString(i+1,param.get(i));
i++;
}
while( i < MAX_PARAMS ) {
ps.setNull(i+1,Types.VARCHAR);
i++;
}

You can use Collections.nCopies to generate a collection of placeholders and join them using String.join:
List<String> params = getParams();
String placeHolders = String.join(",", Collections.nCopies(params.size(), "?"));
String sql = "select * from your_table where some_column in (" + placeHolders + ")";
try ( Connection connection = getConnection();
PreparedStatement ps = connection.prepareStatement(sql)) {
int i = 1;
for (String param : params) {
ps.setString(i++, param);
}
/*
* Execute query/do stuff
*/
}

An unpleasant work-around, but certainly feasible is to use a nested query. Create a temporary table MYVALUES with a column in it. Insert your list of values into the MYVALUES table. Then execute
select my_column from my_table where search_column in ( SELECT value FROM MYVALUES )
Ugly, but a viable alternative if your list of values is very large.
This technique has the added advantage of potentially better query plans from the optimizer (check a page for multiple values, tablescan only once instead once per value, etc) may save on overhead if your database doesn't cache prepared statements. Your "INSERTS" would need to be done in batch and the MYVALUES table may need to be tweaked to have minimal locking or other high-overhead protections.

Limitations of the in() operator is the root of all evil.
It works for trivial cases, and you can extend it with "automatic generation of the prepared statement" however it is always having its limits.
if you're creating a statement with variable number of parameters, that will make an sql parse overhead at each call
on many platforms, the number of parameters of in() operator are limited
on all platforms, total SQL text size is limited, making impossible for sending down 2000 placeholders for the in params
sending down bind variables of 1000-10k is not possible, as the JDBC driver is having its limitations
The in() approach can be good enough for some cases, but not rocket proof :)
The rocket-proof solution is to pass the arbitrary number of parameters in a separate call (by passing a clob of params, for example), and then have a view (or any other way) to represent them in SQL and use in your where criteria.
A brute-force variant is here http://tkyte.blogspot.hu/2006/06/varying-in-lists.html
However if you can use PL/SQL, this mess can become pretty neat.
function getCustomers(in_customerIdList clob) return sys_refcursor is
begin
aux_in_list.parse(in_customerIdList);
open res for
select *
from customer c,
in_list v
where c.customer_id=v.token;
return res;
end;
Then you can pass arbitrary number of comma separated customer ids in the parameter, and:
will get no parse delay, as the SQL for select is stable
no pipelined functions complexity - it is just one query
the SQL is using a simple join, instead of an IN operator, which is quite fast
after all, it is a good rule of thumb of not hitting the database with any plain select or DML, since it is Oracle, which offers lightyears of more than MySQL or similar simple database engines. PL/SQL allows you to hide the storage model from your application domain model in an effective way.
The trick here is:
we need a call which accepts the long string, and store somewhere where the db session can access to it (e.g. simple package variable, or dbms_session.set_context)
then we need a view which can parse this to rows
and then you have a view which contains the ids you're querying, so all you need is a simple join to the table queried.
The view looks like:
create or replace view in_list
as
select
trim( substr (txt,
instr (txt, ',', 1, level ) + 1,
instr (txt, ',', 1, level+1)
- instr (txt, ',', 1, level) -1 ) ) as token
from (select ','||aux_in_list.getpayload||',' txt from dual)
connect by level <= length(aux_in_list.getpayload)-length(replace(aux_in_list.getpayload,',',''))+1
where aux_in_list.getpayload refers to the original input string.
A possible approach would be to pass pl/sql arrays (supported by Oracle only), however you can't use those in pure SQL, therefore a conversion step is always needed. The conversion can not be done in SQL, so after all, passing a clob with all parameters in string and converting it witin a view is the most efficient solution.

Here's how I solved it in my own application. Ideally, you should use a StringBuilder instead of using + for Strings.
String inParenthesis = "(?";
for(int i = 1;i < myList.size();i++) {
inParenthesis += ", ?";
}
inParenthesis += ")";
try(PreparedStatement statement = SQLite.connection.prepareStatement(
String.format("UPDATE table SET value='WINNER' WHERE startTime=? AND name=? AND traderIdx=? AND someValue IN %s", inParenthesis))) {
int x = 1;
statement.setLong(x++, race.startTime);
statement.setString(x++, race.name);
statement.setInt(x++, traderIdx);
for(String str : race.betFair.winners) {
statement.setString(x++, str);
}
int effected = statement.executeUpdate();
}
Using a variable like x above instead of concrete numbers helps a lot if you decide to change the query at a later time.

I've never tried it, but would .setArray() do what you're looking for?
Update: Evidently not. setArray only seems to work with a java.sql.Array that comes from an ARRAY column that you've retrieved from a previous query, or a subquery with an ARRAY column.

My workaround is:
create or replace type split_tbl as table of varchar(32767);
/
create or replace function split
(
p_list varchar2,
p_del varchar2 := ','
) return split_tbl pipelined
is
l_idx pls_integer;
l_list varchar2(32767) := p_list;
l_value varchar2(32767);
begin
loop
l_idx := instr(l_list,p_del);
if l_idx > 0 then
pipe row(substr(l_list,1,l_idx-1));
l_list := substr(l_list,l_idx+length(p_del));
else
pipe row(l_list);
exit;
end if;
end loop;
return;
end split;
/
Now you can use one variable to obtain some values in a table:
select * from table(split('one,two,three'))
one
two
three
select * from TABLE1 where COL1 in (select * from table(split('value1,value2')))
value1 AAA
value2 BBB
So, the prepared statement could be:
"select * from TABLE where COL in (select * from table(split(?)))"
Regards,
Javier Ibanez

I suppose you could (using basic string manipulation) generate the query string in the PreparedStatement to have a number of ?'s matching the number of items in your list.
Of course if you're doing that you're just a step away from generating a giant chained OR in your query, but without having the right number of ? in the query string, I don't see how else you can work around this.

You could use setArray method as mentioned in this javadoc:
PreparedStatement statement = connection.prepareStatement("Select * from emp where field in (?)");
Array array = statement.getConnection().createArrayOf("VARCHAR", new Object[]{"E1", "E2","E3"});
statement.setArray(1, array);
ResultSet rs = statement.executeQuery();

Here's a complete solution in Java to create the prepared statement for you:
/*usage:
Util u = new Util(500); //500 items per bracket.
String sqlBefore = "select * from myTable where (";
List<Integer> values = new ArrayList<Integer>(Arrays.asList(1,2,4,5));
string sqlAfter = ") and foo = 'bar'";
PreparedStatement ps = u.prepareStatements(sqlBefore, values, sqlAfter, connection, "someId");
*/
import java.sql.Connection;
import java.sql.PreparedStatement;
import java.sql.SQLException;
import java.util.ArrayList;
import java.util.List;
public class Util {
private int numValuesInClause;
public Util(int numValuesInClause) {
super();
this.numValuesInClause = numValuesInClause;
}
public int getNumValuesInClause() {
return numValuesInClause;
}
public void setNumValuesInClause(int numValuesInClause) {
this.numValuesInClause = numValuesInClause;
}
/** Split a given list into a list of lists for the given size of numValuesInClause*/
public List<List<Integer>> splitList(
List<Integer> values) {
List<List<Integer>> newList = new ArrayList<List<Integer>>();
while (values.size() > numValuesInClause) {
List<Integer> sublist = values.subList(0,numValuesInClause);
List<Integer> values2 = values.subList(numValuesInClause, values.size());
values = values2;
newList.add( sublist);
}
newList.add(values);
return newList;
}
/**
* Generates a series of split out in clause statements.
* #param sqlBefore ""select * from dual where ("
* #param values [1,2,3,4,5,6,7,8,9,10]
* #param "sqlAfter ) and id = 5"
* #return "select * from dual where (id in (1,2,3) or id in (4,5,6) or id in (7,8,9) or id in (10)"
*/
public String genInClauseSql(String sqlBefore, List<Integer> values,
String sqlAfter, String identifier)
{
List<List<Integer>> newLists = splitList(values);
String stmt = sqlBefore;
/* now generate the in clause for each list */
int j = 0; /* keep track of list:newLists index */
for (List<Integer> list : newLists) {
stmt = stmt + identifier +" in (";
StringBuilder innerBuilder = new StringBuilder();
for (int i = 0; i < list.size(); i++) {
innerBuilder.append("?,");
}
String inClause = innerBuilder.deleteCharAt(
innerBuilder.length() - 1).toString();
stmt = stmt + inClause;
stmt = stmt + ")";
if (++j < newLists.size()) {
stmt = stmt + " OR ";
}
}
stmt = stmt + sqlAfter;
return stmt;
}
/**
* Method to convert your SQL and a list of ID into a safe prepared
* statements
*
* #throws SQLException
*/
public PreparedStatement prepareStatements(String sqlBefore,
ArrayList<Integer> values, String sqlAfter, Connection c, String identifier)
throws SQLException {
/* First split our potentially big list into lots of lists */
String stmt = genInClauseSql(sqlBefore, values, sqlAfter, identifier);
PreparedStatement ps = c.prepareStatement(stmt);
int i = 1;
for (int val : values)
{
ps.setInt(i++, val);
}
return ps;
}
}

Spring allows passing java.util.Lists to NamedParameterJdbcTemplate , which automates the generation of (?, ?, ?, ..., ?), as appropriate for the number of arguments.
For Oracle, this blog posting discusses the use of oracle.sql.ARRAY (Connection.createArrayOf doesn't work with Oracle). For this you have to modify your SQL statement:
SELECT my_column FROM my_table where search_column IN (select COLUMN_VALUE from table(?))
The oracle table function transforms the passed array into a table like value usable in the IN statement.

try using the instr function?
select my_column from my_table where instr(?, ','||search_column||',') > 0
then
ps.setString(1, ",A,B,C,");
Admittedly this is a bit of a dirty hack, but it does reduce the opportunities for sql injection. Works in oracle anyway.

Sormula supports SQL IN operator by allowing you to supply a java.util.Collection object as a parameter. It creates a prepared statement with a ? for each of the elements the collection. See Example 4 (SQL in example is a comment to clarify what is created but is not used by Sormula).

Generate the query string in the PreparedStatement to have a number of ?'s matching the number of items in your list. Here's an example:
public void myQuery(List<String> items, int other) {
...
String q4in = generateQsForIn(items.size());
String sql = "select * from stuff where foo in ( " + q4in + " ) and bar = ?";
PreparedStatement ps = connection.prepareStatement(sql);
int i = 1;
for (String item : items) {
ps.setString(i++, item);
}
ps.setInt(i++, other);
ResultSet rs = ps.executeQuery();
...
}
private String generateQsForIn(int numQs) {
String items = "";
for (int i = 0; i < numQs; i++) {
if (i != 0) items += ", ";
items += "?";
}
return items;
}

instead of using
SELECT my_column FROM my_table where search_column IN (?)
use the Sql Statement as
select id, name from users where id in (?, ?, ?)
and
preparedStatement.setString( 1, 'A');
preparedStatement.setString( 2,'B');
preparedStatement.setString( 3, 'C');
or use a stored procedure this would be the best solution, since the sql statements will be compiled and stored in DataBase server

I came across a number of limitations related to prepared statement:
The prepared statements are cached only inside the same session (Postgres), so it will really work only with connection pooling
A lot of different prepared statements as proposed by #BalusC may cause the cache to overfill and previously cached statements will be dropped
The query has to be optimized and use indices. Sounds obvious, however e.g. the ANY(ARRAY...) statement proposed by #Boris in one of the top answers cannot use indices and query will be slow despite caching
The prepared statement caches the query plan as well and the actual values of any parameters specified in the statement are unavailable.
Among the proposed solutions I would choose the one that doesn't decrease the query performance and makes the less number of queries. This will be the #4 (batching few queries) from the #Don link or specifying NULL values for unneeded '?' marks as proposed by #Vladimir Dyuzhev

SetArray is the best solution but its not available for many older drivers. The following workaround can be used in java8
String baseQuery ="SELECT my_column FROM my_table where search_column IN (%s)"
String markersString = inputArray.stream().map(e -> "?").collect(joining(","));
String sqlQuery = String.format(baseSQL, markersString);
//Now create Prepared Statement and use loop to Set entries
int index=1;
for (String input : inputArray) {
preparedStatement.setString(index++, input);
}
This solution is better than other ugly while loop solutions where the query string is built by manual iterations

I just worked out a PostgreSQL-specific option for this. It's a bit of a hack, and comes with its own pros and cons and limitations, but it seems to work and isn't limited to a specific development language, platform, or PG driver.
The trick of course is to find a way to pass an arbitrary length collection of values as a single parameter, and have the db recognize it as multiple values. The solution I have working is to construct a delimited string from the values in the collection, pass that string as a single parameter, and use string_to_array() with the requisite casting for PostgreSQL to properly make use of it.
So if you want to search for "foo", "blah", and "abc", you might concatenate them together into a single string as: 'foo,blah,abc'. Here's the straight SQL:
select column from table
where search_column = any (string_to_array('foo,blah,abc', ',')::text[]);
You would obviously change the explicit cast to whatever you wanted your resulting value array to be -- int, text, uuid, etc. And because the function is taking a single string value (or two I suppose, if you want to customize the delimiter as well), you can pass it as a parameter in a prepared statement:
select column from table
where search_column = any (string_to_array($1, ',')::text[]);
This is even flexible enough to support things like LIKE comparisons:
select column from table
where search_column like any (string_to_array('foo%,blah%,abc%', ',')::text[]);
Again, no question it's a hack, but it works and allows you to still use pre-compiled prepared statements that take *ahem* discrete parameters, with the accompanying security and (maybe) performance benefits. Is it advisable and actually performant? Naturally, it depends, as you've got string parsing and possibly casting going on before your query even runs. If you're expecting to send three, five, a few dozen values, sure, it's probably fine. A few thousand? Yeah, maybe not so much. YMMV, limitations and exclusions apply, no warranty express or implied.
But it works.

No one else seems to have suggested using an off-the-shelf query builder yet, like jOOQ or QueryDSL or even Criteria Query that manage dynamic IN lists out of the box, possibly including the management of all edge cases that may arise, such as:
Running into Oracle's maximum of 1000 elements per IN list (irrespective of the number of bind values)
Running into any driver's maximum number of bind values, which I've documented in this answer
Running into cursor cache contention problems because too many distinct SQL strings are "hard parsed" and execution plans cannot be cached anymore (jOOQ and since recently also Hibernate work around this by offering IN list padding)
(Disclaimer: I work for the company behind jOOQ)

Just for completeness: So long as the set of values is not too large, you could also simply string-construct a statement like
... WHERE tab.col = ? OR tab.col = ? OR tab.col = ?
which you could then pass to prepare(), and then use setXXX() in a loop to set all the values. This looks yucky, but many "big" commercial systems routinely do this kind of thing until they hit DB-specific limits, such as 32 KB (I think it is) for statements in Oracle.
Of course you need to ensure that the set will never be unreasonably large, or do error trapping in the event that it is.

Following Adam's idea. Make your prepared statement sort of select my_column from my_table where search_column in (#)
Create a String x and fill it with a number of "?,?,?" depending on your list of values
Then just change the # in the query for your new String x an populate

There are different alternative approaches that we can use for IN clause in PreparedStatement.
Using Single Queries - slowest performance and resource intensive
Using StoredProcedure - Fastest but database specific
Creating dynamic query for PreparedStatement - Good Performance but doesn't get benefit of caching and PreparedStatement is recompiled every time.
Use NULL in PreparedStatement queries - Optimal performance, works great when you know the limit of IN clause arguments. If there is no limit, then you can execute queries in batch.
Sample code snippet is;
int i = 1;
for(; i <=ids.length; i++){
ps.setInt(i, ids[i-1]);
}
//set null for remaining ones
for(; i<=PARAM_SIZE;i++){
ps.setNull(i, java.sql.Types.INTEGER);
}
You can check more details about these alternative approaches here.

For some situations regexp might help.
Here is an example I've checked on Oracle, and it works.
select * from my_table where REGEXP_LIKE (search_column, 'value1|value2')
But there is a number of drawbacks with it:
Any column it applied should be converted to varchar/char, at least implicitly.
Need to be careful with special characters.
It can slow down performance - in my case IN version uses index and range scan, and REGEXP version do full scan.

After examining various solutions in different forums and not finding a good solution, I feel the below hack I came up with, is the easiest to follow and code:
Example: Suppose you have multiple parameters to pass in the 'IN' clause. Just put a dummy String inside the 'IN' clause, say, "PARAM" do denote the list of parameters that will be coming in the place of this dummy String.
select * from TABLE_A where ATTR IN (PARAM);
You can collect all the parameters into a single String variable in your Java code. This can be done as follows:
String param1 = "X";
String param2 = "Y";
String param1 = param1.append(",").append(param2);
You can append all your parameters separated by commas into a single String variable, 'param1', in our case.
After collecting all the parameters into a single String you can just replace the dummy text in your query, i.e., "PARAM" in this case, with the parameter String, i.e., param1. Here is what you need to do:
String query = query.replaceFirst("PARAM",param1); where we have the value of query as
query = "select * from TABLE_A where ATTR IN (PARAM)";
You can now execute your query using the executeQuery() method. Just make sure that you don't have the word "PARAM" in your query anywhere. You can use a combination of special characters and alphabets instead of the word "PARAM" in order to make sure that there is no possibility of such a word coming in the query. Hope you got the solution.
Note: Though this is not a prepared query, it does the work that I wanted my code to do.

Just for completeness and because I did not see anyone else suggest it:
Before implementing any of the complicated suggestions above consider if SQL injection is indeed a problem in your scenario.
In many cases the value provided to IN (...) is a list of ids that have been generated in a way that you can be sure that no injection is possible... (e.g. the results of a previous select some_id from some_table where some_condition.)
If that is the case you might just concatenate this value and not use the services or the prepared statement for it or use them for other parameters of this query.
query="select f1,f2 from t1 where f3=? and f2 in (" + sListOfIds + ");";

PreparedStatement doesn't provide any good way to deal with SQL IN clause. Per http://www.javaranch.com/journal/200510/Journal200510.jsp#a2 "You can't substitute things that are meant to become part of the SQL statement. This is necessary because if the SQL itself can change, the driver can't precompile the statement. It also has the nice side effect of preventing SQL injection attacks." I ended up using following approach:
String query = "SELECT my_column FROM my_table where search_column IN ($searchColumns)";
query = query.replace("$searchColumns", "'A', 'B', 'C'");
Statement stmt = connection.createStatement();
boolean hasResults = stmt.execute(query);
do {
if (hasResults)
return stmt.getResultSet();
hasResults = stmt.getMoreResults();
} while (hasResults || stmt.getUpdateCount() != -1);

OK, so I couldn't remember exactly how (or where) I did this before so I came to stack overflow to quickly find the answer. I was surprised I couldn't.
So, how I got around the IN problem a long time ago was with a statement like this:
where myColumn in ( select regexp_substr(:myList,'[^,]+', 1, level) from dual connect by regexp_substr(:myList, '[^,]+', 1, level) is not null)
set the myList parameter as a comma delimited string: A,B,C,D...
Note: You have to set the parameter twice!

This is not the ideal practice, yet it's simple and works well for me most of the time.
where ? like concat( "%|", TABLE_ID , "|%" )
Then you pass through ? the IDs in this way: |1|,|2|,|3|,...|

Apache dbutils Java cannot get String value [duplicate]

What are the best workarounds for using a SQL IN clause with instances of java.sql.PreparedStatement, which is not supported for multiple values due to SQL injection attack security issues: One ? placeholder represents one value, rather than a list of values.
Consider the following SQL statement:
SELECT my_column FROM my_table where search_column IN (?)
Using preparedStatement.setString( 1, "'A', 'B', 'C'" ); is essentially a non-working attempt at a workaround of the reasons for using ? in the first place.
What workarounds are available?

An analysis of the various options available, and the pros and cons of each is available in Jeanne Boyarsky's Batching Select Statements in JDBC entry on JavaRanch Journal.
The suggested options are:
Prepare SELECT my_column FROM my_table WHERE search_column = ?, execute it for each value and UNION the results client-side. Requires only one prepared statement. Slow and painful.
Prepare SELECT my_column FROM my_table WHERE search_column IN (?,?,?) and execute it. Requires one prepared statement per size-of-IN-list. Fast and obvious.
Prepare SELECT my_column FROM my_table WHERE search_column = ? ; SELECT my_column FROM my_table WHERE search_column = ? ; ... and execute it. [Or use UNION ALL in place of those semicolons. --ed] Requires one prepared statement per size-of-IN-list. Stupidly slow, strictly worse than WHERE search_column IN (?,?,?), so I don't know why the blogger even suggested it.
Use a stored procedure to construct the result set.
Prepare N different size-of-IN-list queries; say, with 2, 10, and 50 values. To search for an IN-list with 6 different values, populate the size-10 query so that it looks like SELECT my_column FROM my_table WHERE search_column IN (1,2,3,4,5,6,6,6,6,6). Any decent server will optimize out the duplicate values before running the query.
None of these options are ideal.
The best option if you are using JDBC4 and a server that supports x = ANY(y), is to use PreparedStatement.setArray as described in Boris's anwser.
There doesn't seem to be any way to make setArray work with IN-lists, though.
Sometimes SQL statements are loaded at runtime (e.g., from a properties file) but require a variable number of parameters. In such cases, first define the query:
query=SELECT * FROM table t WHERE t.column IN (?)
Next, load the query. Then determine the number of parameters prior to running it. Once the parameter count is known, run:
sql = any( sql, count );
For example:
/**
* Converts a SQL statement containing exactly one IN clause to an IN clause
* using multiple comma-delimited parameters.
*
* #param sql The SQL statement string with one IN clause.
* #param params The number of parameters the SQL statement requires.
* #return The SQL statement with (?) replaced with multiple parameter
* placeholders.
*/
public static String any(String sql, final int params) {
// Create a comma-delimited list based on the number of parameters.
final StringBuilder sb = new StringBuilder(
String.join(", ", Collections.nCopies(possibleValue.size(), "?")));
// For more than 1 parameter, replace the single parameter with
// multiple parameter placeholders.
if (sb.length() > 1) {
sql = sql.replace("(?)", "(" + sb + ")");
}
// Return the modified comma-delimited list of parameters.
return sql;
}
For certain databases where passing an array via the JDBC 4 specification is unsupported, this method can facilitate transforming the slow = ? into the faster IN (?) clause condition, which can then be expanded by calling the any method.

Solution for PostgreSQL:
final PreparedStatement statement = connection.prepareStatement(
"SELECT my_column FROM my_table where search_column = ANY (?)"
);
final String[] values = getValues();
statement.setArray(1, connection.createArrayOf("text", values));
try (ResultSet rs = statement.executeQuery()) {
while(rs.next()) {
// do some...
}
}
or
final PreparedStatement statement = connection.prepareStatement(
"SELECT my_column FROM my_table " +
"where search_column IN (SELECT * FROM unnest(?))"
);
final String[] values = getValues();
statement.setArray(1, connection.createArrayOf("text", values));
try (ResultSet rs = statement.executeQuery()) {
while(rs.next()) {
// do some...
}
}

No simple way AFAIK.
If the target is to keep statement cache ratio high (i.e to not create a statement per every parameter count), you may do the following:
create a statement with a few (e.g. 10) parameters:
... WHERE A IN (?,?,?,?,?,?,?,?,?,?) ...
Bind all actuall parameters
setString(1,"foo");
setString(2,"bar");
Bind the rest as NULL
setNull(3,Types.VARCHAR)
...
setNull(10,Types.VARCHAR)
NULL never matches anything, so it gets optimized out by the SQL plan builder.
The logic is easy to automate when you pass a List into a DAO function:
while( i < param.size() ) {
ps.setString(i+1,param.get(i));
i++;
}
while( i < MAX_PARAMS ) {
ps.setNull(i+1,Types.VARCHAR);
i++;
}

You can use Collections.nCopies to generate a collection of placeholders and join them using String.join:
List<String> params = getParams();
String placeHolders = String.join(",", Collections.nCopies(params.size(), "?"));
String sql = "select * from your_table where some_column in (" + placeHolders + ")";
try ( Connection connection = getConnection();
PreparedStatement ps = connection.prepareStatement(sql)) {
int i = 1;
for (String param : params) {
ps.setString(i++, param);
}
/*
* Execute query/do stuff
*/
}

An unpleasant work-around, but certainly feasible is to use a nested query. Create a temporary table MYVALUES with a column in it. Insert your list of values into the MYVALUES table. Then execute
select my_column from my_table where search_column in ( SELECT value FROM MYVALUES )
Ugly, but a viable alternative if your list of values is very large.
This technique has the added advantage of potentially better query plans from the optimizer (check a page for multiple values, tablescan only once instead once per value, etc) may save on overhead if your database doesn't cache prepared statements. Your "INSERTS" would need to be done in batch and the MYVALUES table may need to be tweaked to have minimal locking or other high-overhead protections.

Limitations of the in() operator is the root of all evil.
It works for trivial cases, and you can extend it with "automatic generation of the prepared statement" however it is always having its limits.
if you're creating a statement with variable number of parameters, that will make an sql parse overhead at each call
on many platforms, the number of parameters of in() operator are limited
on all platforms, total SQL text size is limited, making impossible for sending down 2000 placeholders for the in params
sending down bind variables of 1000-10k is not possible, as the JDBC driver is having its limitations
The in() approach can be good enough for some cases, but not rocket proof :)
The rocket-proof solution is to pass the arbitrary number of parameters in a separate call (by passing a clob of params, for example), and then have a view (or any other way) to represent them in SQL and use in your where criteria.
A brute-force variant is here http://tkyte.blogspot.hu/2006/06/varying-in-lists.html
However if you can use PL/SQL, this mess can become pretty neat.
function getCustomers(in_customerIdList clob) return sys_refcursor is
begin
aux_in_list.parse(in_customerIdList);
open res for
select *
from customer c,
in_list v
where c.customer_id=v.token;
return res;
end;
Then you can pass arbitrary number of comma separated customer ids in the parameter, and:
will get no parse delay, as the SQL for select is stable
no pipelined functions complexity - it is just one query
the SQL is using a simple join, instead of an IN operator, which is quite fast
after all, it is a good rule of thumb of not hitting the database with any plain select or DML, since it is Oracle, which offers lightyears of more than MySQL or similar simple database engines. PL/SQL allows you to hide the storage model from your application domain model in an effective way.
The trick here is:
we need a call which accepts the long string, and store somewhere where the db session can access to it (e.g. simple package variable, or dbms_session.set_context)
then we need a view which can parse this to rows
and then you have a view which contains the ids you're querying, so all you need is a simple join to the table queried.
The view looks like:
create or replace view in_list
as
select
trim( substr (txt,
instr (txt, ',', 1, level ) + 1,
instr (txt, ',', 1, level+1)
- instr (txt, ',', 1, level) -1 ) ) as token
from (select ','||aux_in_list.getpayload||',' txt from dual)
connect by level <= length(aux_in_list.getpayload)-length(replace(aux_in_list.getpayload,',',''))+1
where aux_in_list.getpayload refers to the original input string.
A possible approach would be to pass pl/sql arrays (supported by Oracle only), however you can't use those in pure SQL, therefore a conversion step is always needed. The conversion can not be done in SQL, so after all, passing a clob with all parameters in string and converting it witin a view is the most efficient solution.

Here's how I solved it in my own application. Ideally, you should use a StringBuilder instead of using + for Strings.
String inParenthesis = "(?";
for(int i = 1;i < myList.size();i++) {
inParenthesis += ", ?";
}
inParenthesis += ")";
try(PreparedStatement statement = SQLite.connection.prepareStatement(
String.format("UPDATE table SET value='WINNER' WHERE startTime=? AND name=? AND traderIdx=? AND someValue IN %s", inParenthesis))) {
int x = 1;
statement.setLong(x++, race.startTime);
statement.setString(x++, race.name);
statement.setInt(x++, traderIdx);
for(String str : race.betFair.winners) {
statement.setString(x++, str);
}
int effected = statement.executeUpdate();
}
Using a variable like x above instead of concrete numbers helps a lot if you decide to change the query at a later time.

I've never tried it, but would .setArray() do what you're looking for?
Update: Evidently not. setArray only seems to work with a java.sql.Array that comes from an ARRAY column that you've retrieved from a previous query, or a subquery with an ARRAY column.

My workaround is:
create or replace type split_tbl as table of varchar(32767);
/
create or replace function split
(
p_list varchar2,
p_del varchar2 := ','
) return split_tbl pipelined
is
l_idx pls_integer;
l_list varchar2(32767) := p_list;
l_value varchar2(32767);
begin
loop
l_idx := instr(l_list,p_del);
if l_idx > 0 then
pipe row(substr(l_list,1,l_idx-1));
l_list := substr(l_list,l_idx+length(p_del));
else
pipe row(l_list);
exit;
end if;
end loop;
return;
end split;
/
Now you can use one variable to obtain some values in a table:
select * from table(split('one,two,three'))
one
two
three
select * from TABLE1 where COL1 in (select * from table(split('value1,value2')))
value1 AAA
value2 BBB
So, the prepared statement could be:
"select * from TABLE where COL in (select * from table(split(?)))"
Regards,
Javier Ibanez

I suppose you could (using basic string manipulation) generate the query string in the PreparedStatement to have a number of ?'s matching the number of items in your list.
Of course if you're doing that you're just a step away from generating a giant chained OR in your query, but without having the right number of ? in the query string, I don't see how else you can work around this.

You could use setArray method as mentioned in this javadoc:
PreparedStatement statement = connection.prepareStatement("Select * from emp where field in (?)");
Array array = statement.getConnection().createArrayOf("VARCHAR", new Object[]{"E1", "E2","E3"});
statement.setArray(1, array);
ResultSet rs = statement.executeQuery();

Here's a complete solution in Java to create the prepared statement for you:
/*usage:
Util u = new Util(500); //500 items per bracket.
String sqlBefore = "select * from myTable where (";
List<Integer> values = new ArrayList<Integer>(Arrays.asList(1,2,4,5));
string sqlAfter = ") and foo = 'bar'";
PreparedStatement ps = u.prepareStatements(sqlBefore, values, sqlAfter, connection, "someId");
*/
import java.sql.Connection;
import java.sql.PreparedStatement;
import java.sql.SQLException;
import java.util.ArrayList;
import java.util.List;
public class Util {
private int numValuesInClause;
public Util(int numValuesInClause) {
super();
this.numValuesInClause = numValuesInClause;
}
public int getNumValuesInClause() {
return numValuesInClause;
}
public void setNumValuesInClause(int numValuesInClause) {
this.numValuesInClause = numValuesInClause;
}
/** Split a given list into a list of lists for the given size of numValuesInClause*/
public List<List<Integer>> splitList(
List<Integer> values) {
List<List<Integer>> newList = new ArrayList<List<Integer>>();
while (values.size() > numValuesInClause) {
List<Integer> sublist = values.subList(0,numValuesInClause);
List<Integer> values2 = values.subList(numValuesInClause, values.size());
values = values2;
newList.add( sublist);
}
newList.add(values);
return newList;
}
/**
* Generates a series of split out in clause statements.
* #param sqlBefore ""select * from dual where ("
* #param values [1,2,3,4,5,6,7,8,9,10]
* #param "sqlAfter ) and id = 5"
* #return "select * from dual where (id in (1,2,3) or id in (4,5,6) or id in (7,8,9) or id in (10)"
*/
public String genInClauseSql(String sqlBefore, List<Integer> values,
String sqlAfter, String identifier)
{
List<List<Integer>> newLists = splitList(values);
String stmt = sqlBefore;
/* now generate the in clause for each list */
int j = 0; /* keep track of list:newLists index */
for (List<Integer> list : newLists) {
stmt = stmt + identifier +" in (";
StringBuilder innerBuilder = new StringBuilder();
for (int i = 0; i < list.size(); i++) {
innerBuilder.append("?,");
}
String inClause = innerBuilder.deleteCharAt(
innerBuilder.length() - 1).toString();
stmt = stmt + inClause;
stmt = stmt + ")";
if (++j < newLists.size()) {
stmt = stmt + " OR ";
}
}
stmt = stmt + sqlAfter;
return stmt;
}
/**
* Method to convert your SQL and a list of ID into a safe prepared
* statements
*
* #throws SQLException
*/
public PreparedStatement prepareStatements(String sqlBefore,
ArrayList<Integer> values, String sqlAfter, Connection c, String identifier)
throws SQLException {
/* First split our potentially big list into lots of lists */
String stmt = genInClauseSql(sqlBefore, values, sqlAfter, identifier);
PreparedStatement ps = c.prepareStatement(stmt);
int i = 1;
for (int val : values)
{
ps.setInt(i++, val);
}
return ps;
}
}

Spring allows passing java.util.Lists to NamedParameterJdbcTemplate , which automates the generation of (?, ?, ?, ..., ?), as appropriate for the number of arguments.
For Oracle, this blog posting discusses the use of oracle.sql.ARRAY (Connection.createArrayOf doesn't work with Oracle). For this you have to modify your SQL statement:
SELECT my_column FROM my_table where search_column IN (select COLUMN_VALUE from table(?))
The oracle table function transforms the passed array into a table like value usable in the IN statement.

try using the instr function?
select my_column from my_table where instr(?, ','||search_column||',') > 0
then
ps.setString(1, ",A,B,C,");
Admittedly this is a bit of a dirty hack, but it does reduce the opportunities for sql injection. Works in oracle anyway.

Sormula supports SQL IN operator by allowing you to supply a java.util.Collection object as a parameter. It creates a prepared statement with a ? for each of the elements the collection. See Example 4 (SQL in example is a comment to clarify what is created but is not used by Sormula).

Generate the query string in the PreparedStatement to have a number of ?'s matching the number of items in your list. Here's an example:
public void myQuery(List<String> items, int other) {
...
String q4in = generateQsForIn(items.size());
String sql = "select * from stuff where foo in ( " + q4in + " ) and bar = ?";
PreparedStatement ps = connection.prepareStatement(sql);
int i = 1;
for (String item : items) {
ps.setString(i++, item);
}
ps.setInt(i++, other);
ResultSet rs = ps.executeQuery();
...
}
private String generateQsForIn(int numQs) {
String items = "";
for (int i = 0; i < numQs; i++) {
if (i != 0) items += ", ";
items += "?";
}
return items;
}

instead of using
SELECT my_column FROM my_table where search_column IN (?)
use the Sql Statement as
select id, name from users where id in (?, ?, ?)
and
preparedStatement.setString( 1, 'A');
preparedStatement.setString( 2,'B');
preparedStatement.setString( 3, 'C');
or use a stored procedure this would be the best solution, since the sql statements will be compiled and stored in DataBase server

I came across a number of limitations related to prepared statement:
The prepared statements are cached only inside the same session (Postgres), so it will really work only with connection pooling
A lot of different prepared statements as proposed by #BalusC may cause the cache to overfill and previously cached statements will be dropped
The query has to be optimized and use indices. Sounds obvious, however e.g. the ANY(ARRAY...) statement proposed by #Boris in one of the top answers cannot use indices and query will be slow despite caching
The prepared statement caches the query plan as well and the actual values of any parameters specified in the statement are unavailable.
Among the proposed solutions I would choose the one that doesn't decrease the query performance and makes the less number of queries. This will be the #4 (batching few queries) from the #Don link or specifying NULL values for unneeded '?' marks as proposed by #Vladimir Dyuzhev

SetArray is the best solution but its not available for many older drivers. The following workaround can be used in java8
String baseQuery ="SELECT my_column FROM my_table where search_column IN (%s)"
String markersString = inputArray.stream().map(e -> "?").collect(joining(","));
String sqlQuery = String.format(baseSQL, markersString);
//Now create Prepared Statement and use loop to Set entries
int index=1;
for (String input : inputArray) {
preparedStatement.setString(index++, input);
}
This solution is better than other ugly while loop solutions where the query string is built by manual iterations

No one else seems to have suggested using an off-the-shelf query builder yet, like jOOQ or QueryDSL or even Criteria Query that manage dynamic IN lists out of the box, possibly including the management of all edge cases that may arise, such as:
Running into Oracle's maximum of 1000 elements per IN list (irrespective of the number of bind values)
Running into any driver's maximum number of bind values, which I've documented in this answer
Running into cursor cache contention problems because too many distinct SQL strings are "hard parsed" and execution plans cannot be cached anymore (jOOQ and since recently also Hibernate work around this by offering IN list padding)
(Disclaimer: I work for the company behind jOOQ)

Just for completeness: So long as the set of values is not too large, you could also simply string-construct a statement like
... WHERE tab.col = ? OR tab.col = ? OR tab.col = ?
which you could then pass to prepare(), and then use setXXX() in a loop to set all the values. This looks yucky, but many "big" commercial systems routinely do this kind of thing until they hit DB-specific limits, such as 32 KB (I think it is) for statements in Oracle.
Of course you need to ensure that the set will never be unreasonably large, or do error trapping in the event that it is.

Following Adam's idea. Make your prepared statement sort of select my_column from my_table where search_column in (#)
Create a String x and fill it with a number of "?,?,?" depending on your list of values
Then just change the # in the query for your new String x an populate

There are different alternative approaches that we can use for IN clause in PreparedStatement.
Using Single Queries - slowest performance and resource intensive
Using StoredProcedure - Fastest but database specific
Creating dynamic query for PreparedStatement - Good Performance but doesn't get benefit of caching and PreparedStatement is recompiled every time.
Use NULL in PreparedStatement queries - Optimal performance, works great when you know the limit of IN clause arguments. If there is no limit, then you can execute queries in batch.
Sample code snippet is;
int i = 1;
for(; i <=ids.length; i++){
ps.setInt(i, ids[i-1]);
}
//set null for remaining ones
for(; i<=PARAM_SIZE;i++){
ps.setNull(i, java.sql.Types.INTEGER);
}
You can check more details about these alternative approaches here.

For some situations regexp might help.
Here is an example I've checked on Oracle, and it works.
select * from my_table where REGEXP_LIKE (search_column, 'value1|value2')
But there is a number of drawbacks with it:
Any column it applied should be converted to varchar/char, at least implicitly.
Need to be careful with special characters.
It can slow down performance - in my case IN version uses index and range scan, and REGEXP version do full scan.

After examining various solutions in different forums and not finding a good solution, I feel the below hack I came up with, is the easiest to follow and code:
Example: Suppose you have multiple parameters to pass in the 'IN' clause. Just put a dummy String inside the 'IN' clause, say, "PARAM" do denote the list of parameters that will be coming in the place of this dummy String.
select * from TABLE_A where ATTR IN (PARAM);
You can collect all the parameters into a single String variable in your Java code. This can be done as follows:
String param1 = "X";
String param2 = "Y";
String param1 = param1.append(",").append(param2);
You can append all your parameters separated by commas into a single String variable, 'param1', in our case.
After collecting all the parameters into a single String you can just replace the dummy text in your query, i.e., "PARAM" in this case, with the parameter String, i.e., param1. Here is what you need to do:
String query = query.replaceFirst("PARAM",param1); where we have the value of query as
query = "select * from TABLE_A where ATTR IN (PARAM)";
You can now execute your query using the executeQuery() method. Just make sure that you don't have the word "PARAM" in your query anywhere. You can use a combination of special characters and alphabets instead of the word "PARAM" in order to make sure that there is no possibility of such a word coming in the query. Hope you got the solution.
Note: Though this is not a prepared query, it does the work that I wanted my code to do.

Just for completeness and because I did not see anyone else suggest it:
Before implementing any of the complicated suggestions above consider if SQL injection is indeed a problem in your scenario.
In many cases the value provided to IN (...) is a list of ids that have been generated in a way that you can be sure that no injection is possible... (e.g. the results of a previous select some_id from some_table where some_condition.)
If that is the case you might just concatenate this value and not use the services or the prepared statement for it or use them for other parameters of this query.
query="select f1,f2 from t1 where f3=? and f2 in (" + sListOfIds + ");";

PreparedStatement doesn't provide any good way to deal with SQL IN clause. Per http://www.javaranch.com/journal/200510/Journal200510.jsp#a2 "You can't substitute things that are meant to become part of the SQL statement. This is necessary because if the SQL itself can change, the driver can't precompile the statement. It also has the nice side effect of preventing SQL injection attacks." I ended up using following approach:
String query = "SELECT my_column FROM my_table where search_column IN ($searchColumns)";
query = query.replace("$searchColumns", "'A', 'B', 'C'");
Statement stmt = connection.createStatement();
boolean hasResults = stmt.execute(query);
do {
if (hasResults)
return stmt.getResultSet();
hasResults = stmt.getMoreResults();
} while (hasResults || stmt.getUpdateCount() != -1);

OK, so I couldn't remember exactly how (or where) I did this before so I came to stack overflow to quickly find the answer. I was surprised I couldn't.
So, how I got around the IN problem a long time ago was with a statement like this:
where myColumn in ( select regexp_substr(:myList,'[^,]+', 1, level) from dual connect by regexp_substr(:myList, '[^,]+', 1, level) is not null)
set the myList parameter as a comma delimited string: A,B,C,D...
Note: You have to set the parameter twice!

This is not the ideal practice, yet it's simple and works well for me most of the time.
where ? like concat( "%|", TABLE_ID , "|%" )
Then you pass through ? the IDs in this way: |1|,|2|,|3|,...|

Java JDBC MySQL ArrayList<String> into java.sql.Array for preparedStatement.setArray(x,y) [duplicate]

What are the best workarounds for using a SQL IN clause with instances of java.sql.PreparedStatement, which is not supported for multiple values due to SQL injection attack security issues: One ? placeholder represents one value, rather than a list of values.
Consider the following SQL statement:
SELECT my_column FROM my_table where search_column IN (?)
Using preparedStatement.setString( 1, "'A', 'B', 'C'" ); is essentially a non-working attempt at a workaround of the reasons for using ? in the first place.
What workarounds are available?

An analysis of the various options available, and the pros and cons of each is available in Jeanne Boyarsky's Batching Select Statements in JDBC entry on JavaRanch Journal.
The suggested options are:
Prepare SELECT my_column FROM my_table WHERE search_column = ?, execute it for each value and UNION the results client-side. Requires only one prepared statement. Slow and painful.
Prepare SELECT my_column FROM my_table WHERE search_column IN (?,?,?) and execute it. Requires one prepared statement per size-of-IN-list. Fast and obvious.
Prepare SELECT my_column FROM my_table WHERE search_column = ? ; SELECT my_column FROM my_table WHERE search_column = ? ; ... and execute it. [Or use UNION ALL in place of those semicolons. --ed] Requires one prepared statement per size-of-IN-list. Stupidly slow, strictly worse than WHERE search_column IN (?,?,?), so I don't know why the blogger even suggested it.
Use a stored procedure to construct the result set.
Prepare N different size-of-IN-list queries; say, with 2, 10, and 50 values. To search for an IN-list with 6 different values, populate the size-10 query so that it looks like SELECT my_column FROM my_table WHERE search_column IN (1,2,3,4,5,6,6,6,6,6). Any decent server will optimize out the duplicate values before running the query.
None of these options are ideal.
The best option if you are using JDBC4 and a server that supports x = ANY(y), is to use PreparedStatement.setArray as described in Boris's anwser.
There doesn't seem to be any way to make setArray work with IN-lists, though.
Sometimes SQL statements are loaded at runtime (e.g., from a properties file) but require a variable number of parameters. In such cases, first define the query:
query=SELECT * FROM table t WHERE t.column IN (?)
Next, load the query. Then determine the number of parameters prior to running it. Once the parameter count is known, run:
sql = any( sql, count );
For example:
/**
* Converts a SQL statement containing exactly one IN clause to an IN clause
* using multiple comma-delimited parameters.
*
* #param sql The SQL statement string with one IN clause.
* #param params The number of parameters the SQL statement requires.
* #return The SQL statement with (?) replaced with multiple parameter
* placeholders.
*/
public static String any(String sql, final int params) {
// Create a comma-delimited list based on the number of parameters.
final StringBuilder sb = new StringBuilder(
String.join(", ", Collections.nCopies(possibleValue.size(), "?")));
// For more than 1 parameter, replace the single parameter with
// multiple parameter placeholders.
if (sb.length() > 1) {
sql = sql.replace("(?)", "(" + sb + ")");
}
// Return the modified comma-delimited list of parameters.
return sql;
}
For certain databases where passing an array via the JDBC 4 specification is unsupported, this method can facilitate transforming the slow = ? into the faster IN (?) clause condition, which can then be expanded by calling the any method.

Solution for PostgreSQL:
final PreparedStatement statement = connection.prepareStatement(
"SELECT my_column FROM my_table where search_column = ANY (?)"
);
final String[] values = getValues();
statement.setArray(1, connection.createArrayOf("text", values));
try (ResultSet rs = statement.executeQuery()) {
while(rs.next()) {
// do some...
}
}
or
final PreparedStatement statement = connection.prepareStatement(
"SELECT my_column FROM my_table " +
"where search_column IN (SELECT * FROM unnest(?))"
);
final String[] values = getValues();
statement.setArray(1, connection.createArrayOf("text", values));
try (ResultSet rs = statement.executeQuery()) {
while(rs.next()) {
// do some...
}
}

No simple way AFAIK.
If the target is to keep statement cache ratio high (i.e to not create a statement per every parameter count), you may do the following:
create a statement with a few (e.g. 10) parameters:
... WHERE A IN (?,?,?,?,?,?,?,?,?,?) ...
Bind all actuall parameters
setString(1,"foo");
setString(2,"bar");
Bind the rest as NULL
setNull(3,Types.VARCHAR)
...
setNull(10,Types.VARCHAR)
NULL never matches anything, so it gets optimized out by the SQL plan builder.
The logic is easy to automate when you pass a List into a DAO function:
while( i < param.size() ) {
ps.setString(i+1,param.get(i));
i++;
}
while( i < MAX_PARAMS ) {
ps.setNull(i+1,Types.VARCHAR);
i++;
}

You can use Collections.nCopies to generate a collection of placeholders and join them using String.join:
List<String> params = getParams();
String placeHolders = String.join(",", Collections.nCopies(params.size(), "?"));
String sql = "select * from your_table where some_column in (" + placeHolders + ")";
try ( Connection connection = getConnection();
PreparedStatement ps = connection.prepareStatement(sql)) {
int i = 1;
for (String param : params) {
ps.setString(i++, param);
}
/*
* Execute query/do stuff
*/
}

An unpleasant work-around, but certainly feasible is to use a nested query. Create a temporary table MYVALUES with a column in it. Insert your list of values into the MYVALUES table. Then execute
select my_column from my_table where search_column in ( SELECT value FROM MYVALUES )
Ugly, but a viable alternative if your list of values is very large.
This technique has the added advantage of potentially better query plans from the optimizer (check a page for multiple values, tablescan only once instead once per value, etc) may save on overhead if your database doesn't cache prepared statements. Your "INSERTS" would need to be done in batch and the MYVALUES table may need to be tweaked to have minimal locking or other high-overhead protections.

Limitations of the in() operator is the root of all evil.
It works for trivial cases, and you can extend it with "automatic generation of the prepared statement" however it is always having its limits.
if you're creating a statement with variable number of parameters, that will make an sql parse overhead at each call
on many platforms, the number of parameters of in() operator are limited
on all platforms, total SQL text size is limited, making impossible for sending down 2000 placeholders for the in params
sending down bind variables of 1000-10k is not possible, as the JDBC driver is having its limitations
The in() approach can be good enough for some cases, but not rocket proof :)
The rocket-proof solution is to pass the arbitrary number of parameters in a separate call (by passing a clob of params, for example), and then have a view (or any other way) to represent them in SQL and use in your where criteria.
A brute-force variant is here http://tkyte.blogspot.hu/2006/06/varying-in-lists.html
However if you can use PL/SQL, this mess can become pretty neat.
function getCustomers(in_customerIdList clob) return sys_refcursor is
begin
aux_in_list.parse(in_customerIdList);
open res for
select *
from customer c,
in_list v
where c.customer_id=v.token;
return res;
end;
Then you can pass arbitrary number of comma separated customer ids in the parameter, and:
will get no parse delay, as the SQL for select is stable
no pipelined functions complexity - it is just one query
the SQL is using a simple join, instead of an IN operator, which is quite fast
after all, it is a good rule of thumb of not hitting the database with any plain select or DML, since it is Oracle, which offers lightyears of more than MySQL or similar simple database engines. PL/SQL allows you to hide the storage model from your application domain model in an effective way.
The trick here is:
we need a call which accepts the long string, and store somewhere where the db session can access to it (e.g. simple package variable, or dbms_session.set_context)
then we need a view which can parse this to rows
and then you have a view which contains the ids you're querying, so all you need is a simple join to the table queried.
The view looks like:
create or replace view in_list
as
select
trim( substr (txt,
instr (txt, ',', 1, level ) + 1,
instr (txt, ',', 1, level+1)
- instr (txt, ',', 1, level) -1 ) ) as token
from (select ','||aux_in_list.getpayload||',' txt from dual)
connect by level <= length(aux_in_list.getpayload)-length(replace(aux_in_list.getpayload,',',''))+1
where aux_in_list.getpayload refers to the original input string.
A possible approach would be to pass pl/sql arrays (supported by Oracle only), however you can't use those in pure SQL, therefore a conversion step is always needed. The conversion can not be done in SQL, so after all, passing a clob with all parameters in string and converting it witin a view is the most efficient solution.

Here's how I solved it in my own application. Ideally, you should use a StringBuilder instead of using + for Strings.
String inParenthesis = "(?";
for(int i = 1;i < myList.size();i++) {
inParenthesis += ", ?";
}
inParenthesis += ")";
try(PreparedStatement statement = SQLite.connection.prepareStatement(
String.format("UPDATE table SET value='WINNER' WHERE startTime=? AND name=? AND traderIdx=? AND someValue IN %s", inParenthesis))) {
int x = 1;
statement.setLong(x++, race.startTime);
statement.setString(x++, race.name);
statement.setInt(x++, traderIdx);
for(String str : race.betFair.winners) {
statement.setString(x++, str);
}
int effected = statement.executeUpdate();
}
Using a variable like x above instead of concrete numbers helps a lot if you decide to change the query at a later time.

I've never tried it, but would .setArray() do what you're looking for?
Update: Evidently not. setArray only seems to work with a java.sql.Array that comes from an ARRAY column that you've retrieved from a previous query, or a subquery with an ARRAY column.

My workaround is:
create or replace type split_tbl as table of varchar(32767);
/
create or replace function split
(
p_list varchar2,
p_del varchar2 := ','
) return split_tbl pipelined
is
l_idx pls_integer;
l_list varchar2(32767) := p_list;
l_value varchar2(32767);
begin
loop
l_idx := instr(l_list,p_del);
if l_idx > 0 then
pipe row(substr(l_list,1,l_idx-1));
l_list := substr(l_list,l_idx+length(p_del));
else
pipe row(l_list);
exit;
end if;
end loop;
return;
end split;
/
Now you can use one variable to obtain some values in a table:
select * from table(split('one,two,three'))
one
two
three
select * from TABLE1 where COL1 in (select * from table(split('value1,value2')))
value1 AAA
value2 BBB
So, the prepared statement could be:
"select * from TABLE where COL in (select * from table(split(?)))"
Regards,
Javier Ibanez

I suppose you could (using basic string manipulation) generate the query string in the PreparedStatement to have a number of ?'s matching the number of items in your list.
Of course if you're doing that you're just a step away from generating a giant chained OR in your query, but without having the right number of ? in the query string, I don't see how else you can work around this.

You could use setArray method as mentioned in this javadoc:
PreparedStatement statement = connection.prepareStatement("Select * from emp where field in (?)");
Array array = statement.getConnection().createArrayOf("VARCHAR", new Object[]{"E1", "E2","E3"});
statement.setArray(1, array);
ResultSet rs = statement.executeQuery();

Here's a complete solution in Java to create the prepared statement for you:
/*usage:
Util u = new Util(500); //500 items per bracket.
String sqlBefore = "select * from myTable where (";
List<Integer> values = new ArrayList<Integer>(Arrays.asList(1,2,4,5));
string sqlAfter = ") and foo = 'bar'";
PreparedStatement ps = u.prepareStatements(sqlBefore, values, sqlAfter, connection, "someId");
*/
import java.sql.Connection;
import java.sql.PreparedStatement;
import java.sql.SQLException;
import java.util.ArrayList;
import java.util.List;
public class Util {
private int numValuesInClause;
public Util(int numValuesInClause) {
super();
this.numValuesInClause = numValuesInClause;
}
public int getNumValuesInClause() {
return numValuesInClause;
}
public void setNumValuesInClause(int numValuesInClause) {
this.numValuesInClause = numValuesInClause;
}
/** Split a given list into a list of lists for the given size of numValuesInClause*/
public List<List<Integer>> splitList(
List<Integer> values) {
List<List<Integer>> newList = new ArrayList<List<Integer>>();
while (values.size() > numValuesInClause) {
List<Integer> sublist = values.subList(0,numValuesInClause);
List<Integer> values2 = values.subList(numValuesInClause, values.size());
values = values2;
newList.add( sublist);
}
newList.add(values);
return newList;
}
/**
* Generates a series of split out in clause statements.
* #param sqlBefore ""select * from dual where ("
* #param values [1,2,3,4,5,6,7,8,9,10]
* #param "sqlAfter ) and id = 5"
* #return "select * from dual where (id in (1,2,3) or id in (4,5,6) or id in (7,8,9) or id in (10)"
*/
public String genInClauseSql(String sqlBefore, List<Integer> values,
String sqlAfter, String identifier)
{
List<List<Integer>> newLists = splitList(values);
String stmt = sqlBefore;
/* now generate the in clause for each list */
int j = 0; /* keep track of list:newLists index */
for (List<Integer> list : newLists) {
stmt = stmt + identifier +" in (";
StringBuilder innerBuilder = new StringBuilder();
for (int i = 0; i < list.size(); i++) {
innerBuilder.append("?,");
}
String inClause = innerBuilder.deleteCharAt(
innerBuilder.length() - 1).toString();
stmt = stmt + inClause;
stmt = stmt + ")";
if (++j < newLists.size()) {
stmt = stmt + " OR ";
}
}
stmt = stmt + sqlAfter;
return stmt;
}
/**
* Method to convert your SQL and a list of ID into a safe prepared
* statements
*
* #throws SQLException
*/
public PreparedStatement prepareStatements(String sqlBefore,
ArrayList<Integer> values, String sqlAfter, Connection c, String identifier)
throws SQLException {
/* First split our potentially big list into lots of lists */
String stmt = genInClauseSql(sqlBefore, values, sqlAfter, identifier);
PreparedStatement ps = c.prepareStatement(stmt);
int i = 1;
for (int val : values)
{
ps.setInt(i++, val);
}
return ps;
}
}

Spring allows passing java.util.Lists to NamedParameterJdbcTemplate , which automates the generation of (?, ?, ?, ..., ?), as appropriate for the number of arguments.
For Oracle, this blog posting discusses the use of oracle.sql.ARRAY (Connection.createArrayOf doesn't work with Oracle). For this you have to modify your SQL statement:
SELECT my_column FROM my_table where search_column IN (select COLUMN_VALUE from table(?))
The oracle table function transforms the passed array into a table like value usable in the IN statement.

try using the instr function?
select my_column from my_table where instr(?, ','||search_column||',') > 0
then
ps.setString(1, ",A,B,C,");
Admittedly this is a bit of a dirty hack, but it does reduce the opportunities for sql injection. Works in oracle anyway.

Sormula supports SQL IN operator by allowing you to supply a java.util.Collection object as a parameter. It creates a prepared statement with a ? for each of the elements the collection. See Example 4 (SQL in example is a comment to clarify what is created but is not used by Sormula).

Generate the query string in the PreparedStatement to have a number of ?'s matching the number of items in your list. Here's an example:
public void myQuery(List<String> items, int other) {
...
String q4in = generateQsForIn(items.size());
String sql = "select * from stuff where foo in ( " + q4in + " ) and bar = ?";
PreparedStatement ps = connection.prepareStatement(sql);
int i = 1;
for (String item : items) {
ps.setString(i++, item);
}
ps.setInt(i++, other);
ResultSet rs = ps.executeQuery();
...
}
private String generateQsForIn(int numQs) {
String items = "";
for (int i = 0; i < numQs; i++) {
if (i != 0) items += ", ";
items += "?";
}
return items;
}

instead of using
SELECT my_column FROM my_table where search_column IN (?)
use the Sql Statement as
select id, name from users where id in (?, ?, ?)
and
preparedStatement.setString( 1, 'A');
preparedStatement.setString( 2,'B');
preparedStatement.setString( 3, 'C');
or use a stored procedure this would be the best solution, since the sql statements will be compiled and stored in DataBase server

I came across a number of limitations related to prepared statement:
The prepared statements are cached only inside the same session (Postgres), so it will really work only with connection pooling
A lot of different prepared statements as proposed by #BalusC may cause the cache to overfill and previously cached statements will be dropped
The query has to be optimized and use indices. Sounds obvious, however e.g. the ANY(ARRAY...) statement proposed by #Boris in one of the top answers cannot use indices and query will be slow despite caching
The prepared statement caches the query plan as well and the actual values of any parameters specified in the statement are unavailable.
Among the proposed solutions I would choose the one that doesn't decrease the query performance and makes the less number of queries. This will be the #4 (batching few queries) from the #Don link or specifying NULL values for unneeded '?' marks as proposed by #Vladimir Dyuzhev

SetArray is the best solution but its not available for many older drivers. The following workaround can be used in java8
String baseQuery ="SELECT my_column FROM my_table where search_column IN (%s)"
String markersString = inputArray.stream().map(e -> "?").collect(joining(","));
String sqlQuery = String.format(baseSQL, markersString);
//Now create Prepared Statement and use loop to Set entries
int index=1;
for (String input : inputArray) {
preparedStatement.setString(index++, input);
}
This solution is better than other ugly while loop solutions where the query string is built by manual iterations

No one else seems to have suggested using an off-the-shelf query builder yet, like jOOQ or QueryDSL or even Criteria Query that manage dynamic IN lists out of the box, possibly including the management of all edge cases that may arise, such as:
Running into Oracle's maximum of 1000 elements per IN list (irrespective of the number of bind values)
Running into any driver's maximum number of bind values, which I've documented in this answer
Running into cursor cache contention problems because too many distinct SQL strings are "hard parsed" and execution plans cannot be cached anymore (jOOQ and since recently also Hibernate work around this by offering IN list padding)
(Disclaimer: I work for the company behind jOOQ)

Just for completeness: So long as the set of values is not too large, you could also simply string-construct a statement like
... WHERE tab.col = ? OR tab.col = ? OR tab.col = ?
which you could then pass to prepare(), and then use setXXX() in a loop to set all the values. This looks yucky, but many "big" commercial systems routinely do this kind of thing until they hit DB-specific limits, such as 32 KB (I think it is) for statements in Oracle.
Of course you need to ensure that the set will never be unreasonably large, or do error trapping in the event that it is.

Following Adam's idea. Make your prepared statement sort of select my_column from my_table where search_column in (#)
Create a String x and fill it with a number of "?,?,?" depending on your list of values
Then just change the # in the query for your new String x an populate

There are different alternative approaches that we can use for IN clause in PreparedStatement.
Using Single Queries - slowest performance and resource intensive
Using StoredProcedure - Fastest but database specific
Creating dynamic query for PreparedStatement - Good Performance but doesn't get benefit of caching and PreparedStatement is recompiled every time.
Use NULL in PreparedStatement queries - Optimal performance, works great when you know the limit of IN clause arguments. If there is no limit, then you can execute queries in batch.
Sample code snippet is;
int i = 1;
for(; i <=ids.length; i++){
ps.setInt(i, ids[i-1]);
}
//set null for remaining ones
for(; i<=PARAM_SIZE;i++){
ps.setNull(i, java.sql.Types.INTEGER);
}
You can check more details about these alternative approaches here.

For some situations regexp might help.
Here is an example I've checked on Oracle, and it works.
select * from my_table where REGEXP_LIKE (search_column, 'value1|value2')
But there is a number of drawbacks with it:
Any column it applied should be converted to varchar/char, at least implicitly.
Need to be careful with special characters.
It can slow down performance - in my case IN version uses index and range scan, and REGEXP version do full scan.

After examining various solutions in different forums and not finding a good solution, I feel the below hack I came up with, is the easiest to follow and code:
Example: Suppose you have multiple parameters to pass in the 'IN' clause. Just put a dummy String inside the 'IN' clause, say, "PARAM" do denote the list of parameters that will be coming in the place of this dummy String.
select * from TABLE_A where ATTR IN (PARAM);
You can collect all the parameters into a single String variable in your Java code. This can be done as follows:
String param1 = "X";
String param2 = "Y";
String param1 = param1.append(",").append(param2);
You can append all your parameters separated by commas into a single String variable, 'param1', in our case.
After collecting all the parameters into a single String you can just replace the dummy text in your query, i.e., "PARAM" in this case, with the parameter String, i.e., param1. Here is what you need to do:
String query = query.replaceFirst("PARAM",param1); where we have the value of query as
query = "select * from TABLE_A where ATTR IN (PARAM)";
You can now execute your query using the executeQuery() method. Just make sure that you don't have the word "PARAM" in your query anywhere. You can use a combination of special characters and alphabets instead of the word "PARAM" in order to make sure that there is no possibility of such a word coming in the query. Hope you got the solution.
Note: Though this is not a prepared query, it does the work that I wanted my code to do.

Just for completeness and because I did not see anyone else suggest it:
Before implementing any of the complicated suggestions above consider if SQL injection is indeed a problem in your scenario.
In many cases the value provided to IN (...) is a list of ids that have been generated in a way that you can be sure that no injection is possible... (e.g. the results of a previous select some_id from some_table where some_condition.)
If that is the case you might just concatenate this value and not use the services or the prepared statement for it or use them for other parameters of this query.
query="select f1,f2 from t1 where f3=? and f2 in (" + sListOfIds + ");";

PreparedStatement doesn't provide any good way to deal with SQL IN clause. Per http://www.javaranch.com/journal/200510/Journal200510.jsp#a2 "You can't substitute things that are meant to become part of the SQL statement. This is necessary because if the SQL itself can change, the driver can't precompile the statement. It also has the nice side effect of preventing SQL injection attacks." I ended up using following approach:
String query = "SELECT my_column FROM my_table where search_column IN ($searchColumns)";
query = query.replace("$searchColumns", "'A', 'B', 'C'");
Statement stmt = connection.createStatement();
boolean hasResults = stmt.execute(query);
do {
if (hasResults)
return stmt.getResultSet();
hasResults = stmt.getMoreResults();
} while (hasResults || stmt.getUpdateCount() != -1);

OK, so I couldn't remember exactly how (or where) I did this before so I came to stack overflow to quickly find the answer. I was surprised I couldn't.
So, how I got around the IN problem a long time ago was with a statement like this:
where myColumn in ( select regexp_substr(:myList,'[^,]+', 1, level) from dual connect by regexp_substr(:myList, '[^,]+', 1, level) is not null)
set the myList parameter as a comma delimited string: A,B,C,D...
Note: You have to set the parameter twice!

This is not the ideal practice, yet it's simple and works well for me most of the time.
where ? like concat( "%|", TABLE_ID , "|%" )
Then you pass through ? the IDs in this way: |1|,|2|,|3|,...|

How to get number of rows from a resultResult?

I use the below approach to determine my result set is not empty and proceed to do assertions on the values.
...
resultSet = statement.executeQuery("select count(*) as rowCount from tbName where...");
while (resultSet.next()) {
rowCount = Integer.parseInt(resultSet.getString("rowCount"));
}
Assert.assertTrue(rowCount > 0);
resultSet = statement.executeQuery("select * from tbName where ...");
while (resultSet.next()) {
//do some assertions on values here.
}
...
Is there anyway to get the number of rows directly from the resultSet directly in a single query? Something like the below?
resultSet = statement.executeQuery("select * from tbName where ...");
if( resultSet.count/length/size > 0) {
}

You can change the query to include a column with the row count:
select t.*, count(*) over () as row_count
from tbName t
where ...
then you can get the count using
int rowCount rs.getInt("row_count");
Note that you won't get a 0 count because that means the actual query did not return anything in the first place. So you can't use that to verify if your query returned anything. If you only want to check if the result is empty, use next()
resultSet = statement.executeQuery(".....");
if (resultSet.next()) {
// at least one row returned
} else {
// no rows returned at all
}
Btw: you should always use the getXXX() method that matches the column's data type. Using getString() on all columns is not a good idea.

1) Moves the cursor to the last row: resultset.last();
2)Retrieves the current row number: int count = resultset.getRow();
Tips:
It's based on you create a statement via calling function "
Statement createStatement(int resultSetType,int resultSetConcurrency)
throws SQLException"
to gernerate a scrollable resultSet.

There are two ways to get number of rows.
1) if you want to check the number of rows exist in table you may use count query.
2) if you want to count number of rows in a result set you have to traverse that result set to count rows.

Trying to pass a Java variable into a sql string

I've had a look around on the web but can't seem to find a definite answer to my question.
Basically, I have a database and table that are successfully working. Now I want to read each line from my table one by one and store the result into a array and I am trying to use a for loop to be more professional rather then using repetition.
I have this code
for (int i=1; i<=8; i++)
{
String query = "Select * FROM Table1 WHERE ID = i";
Rs = St.executeQuery(query);
COL1Title[i] = Rs.getString("CO1Name");
COL2Age[i] = Rs.getString("CO2Rating");
}
The for loop is in a try catch statement and it's complaining with the error "Unknown column 'i' in 'where clause'"
Im guessing there's a certain way for how variable i is to be inserted in the the query.
I should point out ID is a column that has the auto increment feature added on and is primary key if that helps
Could anyone help me out here?

First, we can simplify the task be executing a single query. Note the addition of the range limit and the ORDER BY - without an ORDER BY the results have an unspecified order!
PreparedStatement stmt = "Select ID, CO1Name, CO2Rating"
+ " FROM Table1"
+ " WHERE ID >= ? AND ID <= ?"
+ " ORDER BY ID";
And bind in placeholders (unless there is good reason otherwise, always use placeholders when injecting data into a query). The values could have been hard-coded above in this case, just as they are hard-coded in the for-loop, but the binding is shown here for future reference:
stmt.setInt(1, 1);
stmt.setInt(2, 8);
Then execute the query:
ResultSet rs = stmt.executeQuery();
And iterate the results. Note that rs.next() must be invoke once before any column is read (the cursor starts before any records) and, in this case, it makes it easy to handle a bunch of results.
while (rs.next()) {
int id = rs.getInt("ID");
String title = rs.getString("CO1Name");
String name = rs.getString("CO2Rating");
// do stuff with this record
}
Note that even though the ORDER BY guarantees that the results are iterated in order of ID, assuming a database cardinality rule ensures each result has a unique ID, there may be 0 to 8 records returned - that is, non-existent records may need to be detected/handled separately.
Also (but not shown), make sure to cleanup (close) the ResultSet when done: use a try/finally or try-with-resources construct.

You need to pass i in string as integer, Replace line by:
String query = String.format("Select * FROM Table1 WHERE ID = %d",i);

Develop Reference

Java is a programming language and computing platform first released by Sun Microsystems in 1995.