Develop Reference

Getting java.lang.UnsatisfiedLinkError at runtime

I'm trying to use JNI to access C++ methods from a Java class. I'm able to compile (both in Eclipse or on command line) my Java class fine, but on executing the class at runtime, I'm getting:
Exception in thread "main" java.lang.UnsatisfiedLinkError: com.domain.services.CallServiceAPIS.createSession()I
at com.domain.services.CallServiceAPIS.createSession(Native Method)
at com.domain.services.CallServiceAPIS.main(CallServiceAPIS.java:18)
Java code is as follows:
package com.domain.services;
public class CallServiceAPIS {
static {
System.loadLibrary("service.client");
}
public native int createSession();
public static void main(String[] args) {
System.out.println(System.getProperty("java.library.path"));
new CallServiceAPIS().createSession();
}
}
I included the printout of the java.library.path just to make sure it's pointing to the correct location of the C++ library - and it is. I also tried setting the LD_LIBRARY_PATH in my Eclipse environment. But neither worked.
Note that the System.loadLibrary call IS working since 1) the code compiles and 2) the error occurs on line 18, which is the new CallServiceAPIs call.
C++ code:
int createSession(const PosServiceInfo info, const SessionArgs& args, Domain::UUID& uuidSession)
{
return int::undefined;
}
Any ideas?

Never mind. I realized that I was using the JNI interface incorrectly. I was thinking you could load an EXISTING C++ library using EXISTING C++ source. But you basically have to rewrite the existing code to make use of the JNI interface.

Eclipse Mars (4.5) hot swap code in debugger not working

So I updated to Eclipse Mars (4.5) and for some reason I'm unable to use the hot swap code in the debugger. Normally I could do something like this:
public static void main(String[] args){
while(true){
System.out.println("123");
}
}
Then if I started it in debug mode, changed the text to "321", then save, then it would update without the need for restarting it. It behaves exactly like it was run in "Run" mode instead of "Debug".
What I have tried:
Creating a new workspace, creating a fresh project, using the code above, nothing happens
Have several JDKs installed, have tried with java 6, 7 & 8, changed the workspace and/or the project settings to use the different JDKs, nothing happens (the fact that I have several versions of java installed shouldn't matter as it was just the moment I updated eclipse it stopped working)
Tried uninstalling removing any config files to eclipse (on a mac, so that would be every file/folder with the word "eclipse" in the ~/Library folder, ran a "find" search to detect all the files). Then tried to create a new workspace, now project, the code snipped, ran in debug mode, nothing happens on save.
Have also made sure I have "Auto Build" enabled, even tried to "clean" it, and disable auto build, then save the code, then do a manual build while the debugger was running: nothing happens
I'm starting to get desperate as I have a hard time getting work done without having debug mode available so any help/hints in the right direction would be of much appreciation.

HotSwap doesn't work with static methods. However it works fine with instance methods, so it will work on this code:
public class Main {
public static void main(String[] args) {
new Main().f();
}
public void f() {
while(true){
System.out.println("123");
}
}
}

Ok so I finally found the problem. It seems that you can't edit loops while they are running. Say you have a loop like this:
public static void main(String[] args){
while(true){
System.out.println("123");
}
}
Then you can't edit the "123" string.
You can how ever edit methods which are called inside the loop like this:
public static void main(String[] args){
while(true){
System.out.println(methodA());
}
}
public static String methodA(){
return "123";
}
Now you can edit the string "123" and it will update.
This also applies for infinite "for" loops, so guess the rule of thumb is that the method body has to be "re-called" before updating, and it isn't enough to wait for the next loop call.

The printf method won't work

This is the second time I've tried to use the PrintWriter#printf method, and I get this error message:
The method printf(String, Object[]) in the type PrintStream is not applicable for the argument (String, String)
The code I'm using has two classes.
This is the first class:
class apples4 {
public static void main(String[] args) {
tuna4 tuna4Object = new tuna4("Kelsey");
tuna4Object.saying();
}
}
This is the second class:
public class tuna4 {
private String girlName;
public tuna4(String name) {
girlName=name;
}
public void setName(String name) {
girlName=name;
}
public String getName() {
return girlName;
}
public void saying(){
System.out.printf("Your first girlfriend was %s\n", getName() );
}
}

Check your compliance level...

PrintStream#printf method is available since Java SE 5. Looks like your code is being compiled/evaluated by Java 4 or prior.
Review your JDK installation and/or your IDE settings about how it is compiling/evaluating your code.
By the way, if using Eclipse and Java 8, Eclipse needs a plugin to recognize Java 8 applications, so by default the evaluator will downgrade your project to Java 1.4. This happened to me and I solved it by installing an update in Eclipse Kepler. Eclipse Luna (latest Eclipse version)says that it supports Java 8, but didn't work for me (not sure if I followed the right steps or did something wrong, but went back to Kepler and works fine).

It might sound weird, but you can cast the return value of your getName() method to Object:
System.out.printf("Your first girlfriend was %s\n", (Object) getName());
Or (to create the requested array) even
System.out.printf("Your first girlfriend was %s\n", new Object[] {(Object) getName()} );
could help.

I'm sorry about my previous post saying I had the same problem, I didn't read the "before you post read this" dialog box that says don't do that. Well, after a lot of time looking around for the answer, I figured it out myself. In Preferences->Java->Compiler box, there is a button in the top left corner called "Configure Project Specific Settings...". Click it and either change the compliance level to >= Java 1.5, or turn it off. Boom, fixed.

you might need to change the execution environment if it's not already java SE 1.8
it might be CDC or sth else , so u need to change it to java SE 1.8
details in picture 1.expand ur project then 2.right click on JRE System Library and choose properties finally 3. if the environment is not java SE 1.8 ,change it to become so

Java Vuser on LoadRunner 11.52 not working

Recently I have started testing of some application which are Java based. Now the problem is even if I put a simple statement lik;
lr.output_message("Hello");
nothihng is coming up. I havw already set the classpath and jdk path, no error is coming while compilation but during run time no display is coming up.
Sample Script
import lrapi.lr;
import lrapi.web;
public class Actions
{
public int init() throws Throwable
{
return 0;
}//end of init
public int action() throws Throwable
{
lr.start_transaction("trans1");
System.out.println("Lin 1");
lr.output_message("Error");
lr.message("Pulkit");
lr.end_transaction("trans1",lr.AUTO);
return 0;
}//end of action
public int end() throws Throwable {
return 0;
}//end of end
}
......................
Actually by doing some R&D the same code is working on 9.52 but not on 11.52 so is it a bug?? can anyone suggest me?

I have another hypothesis. Since you have switched versions the environment is not yet set correctly for 11.52, but it is for 9.52. This could be due to many things, such as installing a 64 bit edition of Java on your 11.52 box and a 32 bit edition on your 9.52 box and then expecting the same results. Perhaps even installing an unsupported version of Java under 11.52, but a supported version under 9.52. Start scoping the differences. Document them well for you will have to take the same setup to your 11.52 load generators for reproduction there.

Error: Could not find or load main class hello.world.HelloWorld

I am trying to run this project called "hello user". I am new to Java, so wrote a simple program that takes your name, and displays "Hello ". while Running it, I get the following error:
run:
Error: Could not find or load main class hello.world.HelloWorld
Java Result: 1
BUILD SUCCESSFUL (total time: 0 seconds)
But when I run file HelloWorld.java, it does it fine
I am doing this on Netbeans IDE 7.2

Rather than the coding error, it could be related to IDE. Since the "Run File" runs okay, but 'Run Project" does not, I believe you have something to set up in IDE itself. Right click the project, and select "Set is as Main", now run the project. I am just giving it a guess, may not help you. But it worth a shot.If it does not help, please paste your code too.

Your class needs a public static void main(String[] args) function. And moreover I suspect that the error could be in the package.
If you want your class in <main_package>.<sub_package>, The directory structure is
- main_package
- sub_package
-HelloWorld.java
And be sure to write your class like this.
package main_package.sub_package;
public class HelloWorld {
public static void main(String[] args){
System.out.println("Hello " + args[o]);
}
}
This is all due to the naming convention in Java

You need to run the .class file containing the public static void main(String[] args) method..
Here, your HelloWorld.java file might contain a class with main() method.. So, you can run it..
This is because, execution of any Java program starts with the invocation of main().. JVM needs an entry point to your code.. Which is main().. If it doesn't find one.. It will not run..
So, make sure, whatever class file you are running, it should have main() method..
UPDATE :- And for the starting point, may be you can skip using packages.. Just go with plain Java class without packages..

This message can also appear in Eclipse (Juno 4.2.2 in my case) and I have found two potential causes for it.
In my cases:
1. a DTD was in error. I deleted the file and that solved the issue*.
2. having cleaned the project, an external Jar that I had built externally had been deleted as could be seen from Properties -> Java Build Path -> Libraries.*
*Having solved either of the above issues, it was necessary to restart Eclipse

if you are using intellij idea then just rebuilding (clean and build) project might solve your problem . because intellij might be still trying to load the old classes which are not there or changed

Make sure you call looks like below:
public class HelloWorld {
public static void main(String[] args) {
System.out.println("hello user");
}
}
To run a Java class in stand alone mode, public static void main(String[] args) is the entry method, which is must.