I'm working on a downloader which looks like this at the moment:
The JFrame uses a BorderLayout.
In the NORTH, I have a JPanel(FlowLayout). In the SOUTH there is also a JPanel(FlowLayout), in the WEST I just have a JTextArea (in a JScrollPane). This is all shown correctly. However, in the EAST I currently have a JPanel(GridLayout(10, 1)).
I want to show up to 10 JProgressBars in the EAST section which are added and removed from the panel dynamically. The problem is, I can not get them to look like I want to them to look: I want the JProgressBars' width to fill up the entire EAST section because 1) This gives the app a more symmetrical look and 2) The ProgressBars may contain long strings that don't fit at the moment. I've tried putting the JPanel that contains the GridLayout(10, 1) in a flowlayout and then put that flowlayout in the EAST section, but that didn't work either.
My code (SSCCE) is currently as follows:
import javax.swing.*;
import java.awt.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.util.HashMap;
import java.util.Map;
public class Main {
public static void main(String[] args) {
new DownloadFrame();
}
private static class DownloadFrame extends JFrame {
private JButton downloadButton;
private JTextField threadIdTextField;
private JTextArea downloadStatusTextArea;
private JScrollPane scrollPane;
private JTextField downloadLocationTextField;
private JButton downloadLocationButton;
private JPanel North;
private JPanel South;
private JPanel ProgressBarPanel;
private Map<String, JProgressBar> progressBarMap;
public DownloadFrame() {
InitComponents();
InitLayout();
AddComponents();
AddActionListeners();
setVisible(true);
setSize(700, 300);
}
private void InitComponents() {
downloadButton = new JButton("Dowload");
threadIdTextField = new JTextField(6);
downloadStatusTextArea = new JTextArea(10, 30);
scrollPane = new JScrollPane(downloadStatusTextArea, ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED, ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
downloadLocationTextField = new JTextField(40);
downloadLocationButton = new JButton("...");
North = new JPanel();
South = new JPanel();
ProgressBarPanel = new JPanel();
progressBarMap = new HashMap<String, JProgressBar>();
}
private void InitLayout() {
North.setLayout(new FlowLayout());
South.setLayout(new FlowLayout());
ProgressBarPanel.setLayout(new GridLayout(10, 1));
}
private void AddComponents() {
North.add(threadIdTextField);
North.add(downloadButton);
add(North, BorderLayout.NORTH);
add(ProgressBarPanel, BorderLayout.EAST);
South.add(downloadLocationTextField);
South.add(downloadLocationButton);
add(South, BorderLayout.SOUTH);
add(scrollPane, BorderLayout.WEST);
}
private void AddActionListeners() {
downloadButton.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
addNewProgessBar(threadIdTextField.getText());
}
});
}
public void addNewProgessBar(String threadId) {
JProgressBar progressBar = new JProgressBar();
progressBar.setStringPainted(true);
progressBarMap.put(threadId, progressBar);
drawProgessBars();
}
void drawProgessBars() {
ProgressBarPanel.removeAll();
for (JProgressBar progressBar : progressBarMap.values()) {
ProgressBarPanel.add(progressBar);
}
validate();
repaint();
}
}
}
Thanks in advance.
EDIT
Easiest solution: change
add(ProgressBarPanel, BorderLayout.EAST);
to
add(ProgressBarPanel, BorderLayout.CENTER);
import javax.swing.*;
import javax.swing.border.*;
import java.awt.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.util.HashMap;
import java.util.Map;
public class Main {
public static void main(String[] args) {
new DownloadFrame();
}
private static class DownloadFrame extends JFrame {
private JButton downloadButton;
private JTextField threadIdTextField;
private JTextArea downloadStatusTextArea;
private JScrollPane scrollPane;
private JTextField downloadLocationTextField;
private JButton downloadLocationButton;
private JPanel North;
private JPanel South;
private JPanel ProgressBarPanel;
private Map<String, JProgressBar> progressBarMap;
public DownloadFrame() {
InitComponents();
AddComponents();
AddActionListeners();
pack();
setVisible(true);
//setSize(700, 300);
}
private void InitComponents() {
setLayout(new BorderLayout());
downloadButton = new JButton("Dowload");
threadIdTextField = new JTextField(6);
downloadStatusTextArea = new JTextArea(10, 30);
scrollPane = new JScrollPane(downloadStatusTextArea, ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED, ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
downloadLocationTextField = new JTextField(40);
downloadLocationButton = new JButton("...");
North = new JPanel(new FlowLayout());
South = new JPanel(new FlowLayout());
ProgressBarPanel = new JPanel(new GridLayout(0, 1));
ProgressBarPanel.setBorder(new LineBorder(Color.black));
ProgressBarPanel.setPreferredSize(new Dimension(300,20));
progressBarMap = new HashMap<String, JProgressBar>();
}
private void AddComponents() {
North.add(threadIdTextField);
North.add(downloadButton);
add(North, BorderLayout.NORTH);
add(ProgressBarPanel, BorderLayout.EAST);
South.add(downloadLocationTextField);
South.add(downloadLocationButton);
add(South, BorderLayout.SOUTH);
add(scrollPane, BorderLayout.WEST);
}
private void AddActionListeners() {
downloadButton.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
addNewProgessBar(threadIdTextField.getText());
}
});
}
public void addNewProgessBar(String threadId) {
JProgressBar progressBar = new JProgressBar();
progressBar.setStringPainted(true);
progressBarMap.put(threadId, progressBar);
drawProgessBars();
}
void drawProgessBars() {
ProgressBarPanel.removeAll();
for (JProgressBar progressBar : progressBarMap.values()) {
ProgressBarPanel.add(progressBar);
}
validate();
repaint();
}
}
}
well. that possible, but in your example CENTER area occupated some Rectangle, its hard to reduce/remove CENTER area to the zero Size
to the North JPanel (BorderLayout) place another JPanel and put it to the EAST (with LayoutManager would be GridLayout(1,2,10,10)) and put here two JComponents JTextField - threadIdTextField and JButton - downloadButton, there you are needed setPreferredSize 1) for JComponents (correct way) or 2) for whole JPanel (possible way too)
JScrollPane with JTextArea must be placed to the CENTER area
JPanel with JProgressBars place to EAST, but again set same PreferredSize as for JPanel with JTextField and JButton from the NORTH
SOUTH JPanel remains without changes
Please post a compilable runnable small program for the quickest best help, an SSCCE.
Suggestions include using GridLayout(0, 1) (variable number of rows, one column), or display the JProgressBars in a JList that uses a custom renderer that extends JProgressBar.
Edit 1:
I know that Andrew has already posted the accepted answer (and 1+ for an excellent answer), but I just wanted to demonstrate that this can be done readily with a JList, something like so:
import java.awt.*;
import java.awt.event.*;
import java.beans.*;
import java.util.Random;
import javax.swing.*;
public class EastProgressList extends JPanel {
private DefaultListModel myListModel = new DefaultListModel();
private JList myList = new JList(myListModel);
private JTextField downloadUrlField = new JTextField(10);
public EastProgressList() {
JButton downLoadBtn = new JButton("Download");
downLoadBtn.addActionListener(new ActionListener() {
#Override
public void actionPerformed(ActionEvent e) {
downloadAction();
}
});
JPanel northPanel = new JPanel();
northPanel.add(new JLabel("File to Download:"));
northPanel.add(downloadUrlField);
northPanel.add(Box.createHorizontalStrut(15));
northPanel.add(downLoadBtn);
myList.setCellRenderer(new ProgressBarCellRenderer());
JScrollPane eastSPane = new JScrollPane(myList);
eastSPane.setPreferredSize(new Dimension(200, 100));
setLayout(new BorderLayout());
add(new JScrollPane(new JTextArea(20, 30)), BorderLayout.CENTER);
add(northPanel, BorderLayout.NORTH);
add(eastSPane, BorderLayout.EAST);
}
private void downloadAction() {
String downloadUrl = downloadUrlField.getText();
final MyData myData = new MyData(downloadUrl);
myListModel.addElement(myData);
myData.addPropertyChangeListener(new PropertyChangeListener() {
public void propertyChange(PropertyChangeEvent evt) {
if (evt.getPropertyName().equals(MyData.VALUE)) {
myList.repaint();
if (myData.getValue() >= 100) {
myListModel.removeElement(myData);
}
}
}
});
}
private class ProgressBarCellRenderer extends JProgressBar implements ListCellRenderer {
protected ProgressBarCellRenderer() {
setBorder(BorderFactory.createLineBorder(Color.blue));
}
public Component getListCellRendererComponent(JList list, Object value,
int index, boolean isSelected, boolean cellHasFocus) {
//setText(value.toString());
MyData myData = (MyData)value;
setValue(myData.getValue());
setString(myData.getText());
setStringPainted(true);
return this;
}
}
private static void createAndShowUI() {
JFrame frame = new JFrame("EastProgressList");
frame.getContentPane().add(new EastProgressList());
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.pack();
frame.setLocationRelativeTo(null);
frame.setVisible(true);
}
public static void main(String[] args) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
createAndShowUI();
}
});
}
}
class MyData {
public static final int TIMER_DELAY = 300;
public static final String VALUE = "value";
protected static final int MAX_DELTA_VALUE = 5;
private String text;
private int value = 0;
private Random random = new Random();
private PropertyChangeSupport pcSupport = new PropertyChangeSupport(this);
public MyData(String text) {
this.text = text;
new Timer(TIMER_DELAY, new ActionListener() {
#Override
public void actionPerformed(ActionEvent e) {
int deltaValue = random.nextInt(MAX_DELTA_VALUE);
int newValue = value + deltaValue;
if (newValue >= 100) {
newValue = 100;
((Timer)e.getSource()).stop();
}
setValue(newValue);
}
}).start();
}
public String getText() {
return text;
}
public int getValue() {
return value;
}
public void setValue(int value) {
int oldValue = this.value;
this.value = value;
PropertyChangeEvent pcEvent = new PropertyChangeEvent(this, VALUE, oldValue, value);
pcSupport.firePropertyChange(pcEvent);
}
public void addPropertyChangeListener(PropertyChangeListener pcListener) {
pcSupport.addPropertyChangeListener(pcListener);
}
}
This results in a GUI looking like so:
Related
I know that this kind of issue has been discussed here many times, but I'm confused. I'm totally beginner in Java and I honestly don't know what to do and I admit that I don't have that much time to read whole documentation provided by Oracle. Here's my problem:
I'm trying to program a GUI for my program that will be show interference of acoustic waves. Mathematical functionality doesn't matter in here. I've got two classes called Window and Sliders. Window is intended to be a 'main GUI class' and Sliders is supposed to inherit (?) from it.
This comes from another issue that I need to implement ActionListener in class Window and ChangeListener in Sliders class. I heard that one class can't implement several classes that's why I made two.
Now, I wrote a little bit chaotic those two classes, but I don't know how to combine them. It's really silly, but after C++ I'm pretty confused how to tell the program that it is supposed to show in one frame either buttons defined in Window class and sliders defined in Sliders class. Currently it shows only buttons I want to make it showing sliders too.
I'm very sorry for chaotic pseudo code, please help. Please, try to explain as simply as you can/possible. Please feel free to ignore overrided methods, they're not finished yet.
import javax.swing.*;
import java.awt.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.util.*;
public class Window extends JFrame implements ActionListener
{
private JButton showChord, playSound, getSample, getPlot;
private JLabel chordInfo;
private JPanel basicFunctions;
public Window()
{
init();
}
private void init()
{
setVisible(true);
setSize(new Dimension(1000,500));
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
basicFunctions = new JPanel();
FlowLayout basicLayout = new FlowLayout();
basicFunctions.setLayout(basicLayout);
showChord = new JButton("Akord");
playSound = new JButton("Odtwórz");
getSample = new JButton("Pobierz dźwięk");
getPlot = new JButton("Pobierz wykres");
showChord.addActionListener(this);
playSound.addActionListener(this);
getSample.addActionListener(this);
getPlot.addActionListener(this);
basicFunctions.add(showChord);
basicFunctions.add(playSound);
basicFunctions.add(getSample);
basicFunctions.add(getPlot);
add(basicFunctions);
Sliders param = new Sliders();
}
public static void main(String[] args)
{
Window frame = new Window();
}
//Action Listener
#Override
public void actionPerformed(ActionEvent a)
{
Object event = a.getSource();
if(event == showChord)
{
}
else if(event == playSound)
{
}
else if(event == getSample)
{
}
else if(event == getPlot)
{
}
}
}
import java.awt.*;
import javax.swing.event.ChangeEvent;
import javax.swing.*;
import javax.swing.event.ChangeListener;
public class Sliders extends Window implements ChangeListener
{
private JPanel sliders, sliderSub;
private JTextField accAmplitude, accFrequency, accPhase;
private JSlider amplitude, frequency, phase;
private double amplitudeValue, frequencyValue, phaseValue;
public Sliders()
{
sliders = new JPanel();
sliders.setLayout(new FlowLayout());
amplitude = new JSlider(0,100,0);
amplitude.setMajorTickSpacing(10);
amplitude.setMinorTickSpacing(5);
amplitude.setPaintTicks(true);
amplitude.setPaintLabels(true);
frequency = new JSlider(0,10,0);
frequency.setMajorTickSpacing(1);
frequency.setMinorTickSpacing(1/10);
frequency.setPaintTicks(true);
frequency.setPaintLabels(true);
phase = new JSlider(0,1,0);
phase.setMinorTickSpacing(2/10);
phase.setPaintTicks(true);
phase.setPaintLabels(true);
accAmplitude = new JTextField();
accFrequency = new JTextField();
accPhase = new JTextField();
sliders.add(amplitude, BorderLayout.NORTH);
sliders.add(frequency, BorderLayout.CENTER);
sliders.add(phase, BorderLayout.SOUTH);
add(sliders);
}
#Override
public void stateChanged(ChangeEvent arg0)
{
}
}
I've done this so far, but those text fields just stopped showing sliders values and I don't know why. They are defined in the Parameters class and Window class. Can someone help? Additionally in the future I'd like to make those text fields editable so that you can set slider value by typing it in the text field.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.border.BevelBorder;
import javax.swing.event.*;
public class Window extends JPanel
{
private JMenuBar mainMenu = new JMenuBar();
private Plot plot = new Plot();
private Parameters param = new Parameters();
private JComboBox chooseChord = new JComboBox();
private JButton playSound = new JButton("Odtwórz");
private JButton getSample = new JButton("Pobierz dźwięk");
private JButton getPlot = new JButton("Pobierz wykres");
private JPanel mainPanel = new JPanel();
private JPanel subPanel = new JPanel();
private JPanel buttonsPanel = new JPanel();
private JPanel slidersPanel = new JPanel();
private JLabel chord = new JLabel("Akord:");
private JTextField aValue = new JTextField();
private JTextField fValue = new JTextField();
private JTextField pValue = new JTextField();
public Window()
{
mainPanel.setLayout(new FlowLayout());
buttonsPanel.setLayout(new BoxLayout(buttonsPanel, BoxLayout.Y_AXIS));
slidersPanel.setLayout(new BorderLayout());
subPanel.setLayout(new BorderLayout());
chooseChord.addItem("A");
chooseChord.addItem("A#");
chooseChord.addItem("Ab");
chooseChord.addItem("B");
chooseChord.addItem("Bb");
chooseChord.addItem("C");
chooseChord.addItem("C#");
chooseChord.addItem("Cb");
chooseChord.addItem("D");
chooseChord.addItem("D#");
chooseChord.addItem("E");
chooseChord.addItem("F");
chooseChord.addItem("F#");
buttonsPanel.add(chord);
buttonsPanel.add(chooseChord);
buttonsPanel.add(Box.createRigidArea(new Dimension(0,10)));
buttonsPanel.add(playSound);
buttonsPanel.add(Box.createRigidArea(new Dimension(0,10)));
buttonsPanel.add(getSample);
buttonsPanel.add(Box.createRigidArea(new Dimension(0,10)));
buttonsPanel.add(getPlot);
buttonsPanel.setBorder(BorderFactory.createTitledBorder("Menu"));
slidersPanel.add(param);
JMenu langMenu = new JMenu("Język");
mainMenu.add(langMenu);
subPanel.add(buttonsPanel, BorderLayout.NORTH);
subPanel.add(slidersPanel, BorderLayout.SOUTH);
mainPanel.add(subPanel);
mainPanel.add(plot);
add(mainPanel);
param.addAmplitudeListener(new ChangeListener()
{
public void stateChanged(ChangeEvent a)
{
double ampValue = param.getAmplitudeValue();
aValue.setText(String.valueOf(ampValue));
}
}
);
param.addFrequencyListener(new ChangeListener()
{
public void stateChanged(ChangeEvent f)
{
double frValue = param.getFrequencyValue();
fValue.setText(String.valueOf(frValue));
}
}
);
param.addPhaseListener(new ChangeListener()
{
public void stateChanged(ChangeEvent p)
{
double phValue = param.getPhaseValue();
pValue.setText(String.valueOf(phValue));
}
}
);
}
public JMenuBar getmainMenu()
{
return mainMenu;
}
private static void GUI()
{
Window mainPanel = new Window();
JFrame frame = new JFrame();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.getContentPane().add(mainPanel);
frame.setJMenuBar(mainPanel.getmainMenu());
frame.pack();
frame.setVisible(true);
}
public static void main(String[] args)
{
SwingUtilities.invokeLater(new Runnable()
{
public void run()
{
GUI();
}
}
);
}
}
class Parameters extends JPanel
{
private JPanel pane = new JPanel();
private JPanel ampPanel = new JPanel();
private JPanel frPanel = new JPanel();
private JPanel phPanel = new JPanel();
private JSlider amplitude = new JSlider(0,100,0);
private JSlider frequency = new JSlider(0,10000,0);
private JSlider phase = new JSlider(0,180,0);
private JLabel pLabel = new JLabel("Faza");
private JLabel aLabel = new JLabel("Amplituda (dB)");
private JLabel fLabel = new JLabel("Częstotliwość (Hz)");
private JTextField preciseAmplitude = new JTextField(3);
private JTextField preciseFrequency = new JTextField(4);
private JTextField precisePhase = new JTextField(3);
public Parameters()
{
preciseAmplitude.setEditable(true);
preciseFrequency.setEditable(true);
precisePhase.setEditable(true);
pane.setLayout(new BoxLayout(pane, BoxLayout.PAGE_AXIS));
ampPanel.setLayout(new FlowLayout());
frPanel.setLayout(new FlowLayout());
phPanel.setLayout(new FlowLayout());
amplitude.setMajorTickSpacing(10);
amplitude.setMinorTickSpacing(5);
amplitude.setPaintTicks(true);
amplitude.setPaintLabels(true);
frequency.setMajorTickSpacing(2000);
frequency.setMinorTickSpacing(100);
frequency.setPaintTicks(true);
frequency.setPaintLabels(true);
phase.setMajorTickSpacing(2/10);
phase.setPaintTicks(true);
phase.setPaintLabels(true);
setBorder(BorderFactory.createTitledBorder("Parametry fali"));
ampPanel.add(aLabel);
ampPanel.add(preciseAmplitude);
pane.add(ampPanel);
pane.add(Box.createRigidArea(new Dimension(0,5)));
pane.add(amplitude);
pane.add(Box.createRigidArea(new Dimension(0,10)));
frPanel.add(fLabel);
frPanel.add(preciseFrequency);
pane.add(frPanel);
pane.add(Box.createRigidArea(new Dimension(0,5)));
pane.add(frequency);
pane.add(Box.createRigidArea(new Dimension(0,10)));
phPanel.add(pLabel);
phPanel.add(precisePhase);
pane.add(phPanel);
pane.add(Box.createRigidArea(new Dimension(0,5)));
pane.add(phase);
pane.add(Box.createRigidArea(new Dimension(0,10)));
add(pane);
}
public int getAmplitudeValue()
{
return amplitude.getValue();
}
public int getFrequencyValue()
{
return frequency.getValue();
}
public int getPhaseValue()
{
return phase.getValue();
}
public void addAmplitudeListener(ChangeListener ampListener)
{
amplitude.addChangeListener(ampListener);
}
public void addFrequencyListener(ChangeListener frListener)
{
frequency.addChangeListener(frListener);
}
public void addPhaseListener(ChangeListener phListener)
{
phase.addChangeListener(phListener);
}
}
class Plot extends JPanel
{
private JPanel componentWave = new JPanel();
private JPanel netWave = new JPanel();
private JLabel componentLabel = new JLabel("Fale składowe");
private JLabel netLabel = new JLabel("Fala wypadkowa");
private JLabel wave = new JLabel("Wybierz falę składową");
private JPanel labels = new JPanel();
private JComboBox chooseWave = new JComboBox();
public Plot()
{
labels.setLayout(new BoxLayout(labels, BoxLayout.PAGE_AXIS));
componentWave.setBackground(new Color(255,255,255));
netWave.setBackground(new Color(255,255,255));
componentWave.setBorder(BorderFactory.createBevelBorder(BevelBorder.LOWERED));
netWave.setBorder(BorderFactory.createBevelBorder(BevelBorder.LOWERED));
componentWave.setPreferredSize(new Dimension(400,200));
netWave.setPreferredSize(new Dimension(400,200));
labels.add(wave);
labels.add(Box.createRigidArea(new Dimension(0,10)));
labels.add(chooseWave);
labels.add(componentLabel);
labels.add(componentWave);
labels.add(Box.createRigidArea(new Dimension(0,20)));
labels.add(netLabel);
labels.add(netWave);
add(labels);
}
}
Window is intended to be a 'main GUI class' and Sliders is supposed to inherit (?) from it.
Nope: this is a misuse of inheritance and will only lead to problems since the Windows instance that Sliders inherently is, is completely distinct from the displayed Windows instance. What you need to do is to pass references.
For example, the following code uses outside classes for the JButton and JMenuItem Actions (Actions are like ActionListeners on steroids), and uses a class that holds a JSlider that allows itside classes to attach listeners to the slider.
import java.awt.Component;
import java.awt.Window;
import java.awt.event.ActionEvent;
import java.awt.event.KeyEvent;
import javax.swing.*;
import javax.swing.event.ChangeEvent;
import javax.swing.event.ChangeListener;
public class Foo extends JPanel {
private static final long serialVersionUID = 1L;
private Action helloAction = new HelloAction("Hello", KeyEvent.VK_H);
private Action exitAction = new ExitAction("Exit", KeyEvent.VK_X);
private JMenuBar menuBar = new JMenuBar();
private JTextField sliderValueField = new JTextField(10);
private Bar bar = new Bar();
public Foo() {
sliderValueField.setEditable(false);
sliderValueField.setFocusable(false);
add(new JButton(helloAction));
add(new JButton(exitAction));
add(new JLabel("Slider Value: "));
add(sliderValueField);
add(bar);
JMenu fileMenu = new JMenu("File");
fileMenu.setMnemonic(KeyEvent.VK_F);
fileMenu.add(new JMenuItem(exitAction));
fileMenu.add(new JMenuItem(helloAction));
menuBar.add(fileMenu);
bar.addSliderListener(new ChangeListener() {
#Override
public void stateChanged(ChangeEvent e) {
int sliderValue = bar.getSliderValue();
sliderValueField.setText(String.valueOf(sliderValue));
}
});
}
public JMenuBar getJMenuBar() {
return menuBar;
}
private static void createAndShowGui() {
Foo mainPanel = new Foo();
JFrame frame = new JFrame("Foo");
frame.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
frame.getContentPane().add(mainPanel);
frame.setJMenuBar(mainPanel.getJMenuBar());
frame.pack();
frame.setLocationByPlatform(true);
frame.setVisible(true);
}
public static void main(String[] args) {
SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGui();
}
});
}
}
class HelloAction extends AbstractAction {
public HelloAction(String name, int mnemonic) {
super(name); // sets name property and gives button its title
putValue(MNEMONIC_KEY, mnemonic);
}
#Override
public void actionPerformed(ActionEvent e) {
JOptionPane.showMessageDialog(null, "Hello!");
}
}
class ExitAction extends AbstractAction {
private static final long serialVersionUID = 1L;
public ExitAction(String name, int mnemonic) {
super(name);
putValue(MNEMONIC_KEY, mnemonic);
}
#Override
public void actionPerformed(ActionEvent e) {
Component component = (Component) e.getSource();
Window win = SwingUtilities.getWindowAncestor(component);
if (win == null) {
// if no window, then a JMenuItem held in a JPopupMenu
JPopupMenu popup = (JPopupMenu) component.getParent();
component = popup.getInvoker();
win = SwingUtilities.getWindowAncestor(component);
}
win.dispose();
}
}
class Bar extends JPanel {
private JSlider slider = new JSlider(0, 100, 50);
public Bar() {
slider.setPaintLabels(true);
slider.setPaintTicks(true);
slider.setMajorTickSpacing(20);
slider.setMinorTickSpacing(5);
slider.setSnapToTicks(true);
setBorder(BorderFactory.createTitledBorder("Slider Panel"));
add(slider);
}
public int getSliderValue() {
return slider.getValue();
}
// one way to let outside classes listen for changes
public void addSliderListener(ChangeListener listener) {
slider.addChangeListener(listener);
}
}
You ask about decimal labels, and yes this can be done but requires use of a label table. For example,
JSlider slider = new JSlider(0, 100, 50);
slider.setPaintLabels(true);
slider.setPaintTicks(true);
slider.setMajorTickSpacing(20);
slider.setMinorTickSpacing(2);
Dictionary<Integer, JLabel> labels = new Hashtable<>();
for (int i = 0; i <= 100; i += 20) {
labels.put(i, new JLabel(String.format("%.1f", i / 200.0)));
}
slider.setLabelTable(labels);
Which displays as:
You would also have to translate the value back from int to its corresponding floating point number.
I know there were similar questions but I have some different problem...
I'd like to remove all elements of JFrame after clicking a button:
It works:
button.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent arg0)
{
frame.getContentPane().removeAll();
frame.revalidate();
frame.repaint();
}
});
All elements disappeared. But after that I need to putelements on this JFrame... After these 3 lines above (below frame.repaint()) I call method initialize (method that I call when I create my window at the beginning):
private void initialize()
{
frame = new JFrame();
frame.setBounds(100, 100, 1454, 860);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.getContentPane().setLayout(null);
JButton btnNewSubject = new JButton("New subject");
btnNewSubject.setBounds(647, 788, 137, 23);
frame.getContentPane().add(btnNewSubject);
JButton btnRefresh = new JButton("Refresh");
btnRefresh.setBounds(1339, 788, 89, 23);
frame.getContentPane().add(btnRefresh);
JLabel lblNewLabel = new JLabel("Subject");
lblNewLabel.setBounds(235, 11, 75, 14);
frame.getContentPane().add(lblNewLabel);
JLabel lblOwner = new JLabel("Owner");
lblOwner.setBounds(662, 11, 46, 14);
frame.getContentPane().add(lblOwner);
JLabel lblStatus = new JLabel("Status");
lblStatus.setBounds(883, 11, 46, 14);
frame.getContentPane().add(lblStatus);
JLabel lblDateOfAdded = new JLabel("Date of added");
lblDateOfAdded.setBounds(1104, 11, 116, 14);
frame.getContentPane().add(lblDateOfAdded);
}
Nothing happens. :( JFrame is still empty. Even if I call revalidate and repaint().
What is wrong?
You are creating a completely new JFrame in your method here
frame = new JFrame();
and you never display it, you never call setVisible(true) on it, and so it will remain invisible. It almost sounds as if you're creating two JFrames without realizing it, that you are adding components to the second non-displayed JFrame, but are leaving displaying just the first one, the one without new components.
More importantly, you will want to use a CardLayout to help you swap your JPanel views as this situation is exactly what it's built for. Also, Your program uses null layout and setBounds(...) something that results in a rigid GUI that may look good on one system but will usually look poor on any other system or screen resolution. Programs created this way are very hard to debug, maintain and upgrade. Instead use the layout managers as this is what they excel at: at creating complex flexible GUI's that can be enhanced and changed easily.
Note that your removeAll() call does not remove the root pane as Ludovic is stating because you're calling this on the contentPane not the JFrame, and the contentPane does not contain the root pane.
Edit
For example,
import java.awt.BorderLayout;
import java.awt.CardLayout;
import java.awt.Component;
import java.awt.Dimension;
import java.awt.Font;
import java.awt.GridLayout;
import java.awt.Window;
import java.awt.event.ActionEvent;
import java.awt.event.KeyEvent;
import javax.swing.*;
import javax.swing.table.DefaultTableModel;
public class CardLayoutEg extends JPanel {
private CardLayout cardlayout = new CardLayout();
private TitlePanel titlePanel = new TitlePanel(this);
private SubjectPanel subjectPanel = new SubjectPanel(this);
public CardLayoutEg() {
setLayout(cardlayout);
add(titlePanel, titlePanel.getName());
add(subjectPanel, subjectPanel.getName());
}
public void nextCard() {
cardlayout.next(this);
}
public void showCard(String key) {
cardlayout.show(this, key);
}
private static void createAndShowGui() {
JFrame frame = new JFrame("CardLayout Example");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.getContentPane().add(new CardLayoutEg());
frame.pack();
frame.setLocationRelativeTo(null);
frame.setVisible(true);
}
public static void main(String[] args) {
SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGui();
}
});
}
}
class TitlePanel extends JPanel {
public static final String TITLE_PANEL = "title panel";
private static final int PREF_W = 900;
private static final int PREF_H = 750;
private static final String TITLE = "My Application Title";
private static final float POINTS = 46f;
private CardLayoutEg cardLayoutEg;
public TitlePanel(CardLayoutEg cardLayoutEg) {
setName(TITLE_PANEL);
this.cardLayoutEg = cardLayoutEg;
JLabel titleLabel = new JLabel(TITLE, SwingConstants.CENTER);
titleLabel.setFont(titleLabel.getFont().deriveFont(Font.BOLD, POINTS));
JButton subjectButton = new JButton(new SubjectAction("Subjects"));
JPanel buttonPanel = new JPanel();
buttonPanel.add(subjectButton);
setLayout(new BorderLayout());
add(titleLabel, BorderLayout.CENTER);
add(buttonPanel, BorderLayout.PAGE_END);
}
#Override
public Dimension getPreferredSize() {
if (isPreferredSizeSet()) {
return super.getPreferredSize();
}
return new Dimension(PREF_W, PREF_H);
}
private class SubjectAction extends AbstractAction {
public SubjectAction(String name) {
super(name);
int mnemonic = (int) name.charAt(0);
putValue(MNEMONIC_KEY, mnemonic);
}
#Override
public void actionPerformed(ActionEvent e) {
cardLayoutEg.showCard(SubjectPanel.SUBJECT_PANEL);
}
}
}
class SubjectPanel extends JPanel {
public static final String SUBJECT_PANEL = "subject panel";
private static final String[] COLUMN_NAMES = {"Subject", "Owner", "Status", "Date Added"};
DefaultTableModel tableModel = new DefaultTableModel(COLUMN_NAMES, 10);
private JTable table = new JTable(tableModel);
private CardLayoutEg cardLayoutEg;
public SubjectPanel(CardLayoutEg cardLayoutEg) {
setBorder(BorderFactory.createTitledBorder("Subject Panel"));
setName(SUBJECT_PANEL);
this.cardLayoutEg = cardLayoutEg;
JPanel buttonPanel = new JPanel();
buttonPanel.setLayout(new GridLayout(1, 0, 10, 0));
buttonPanel.add(new JButton("New Subject"));
buttonPanel.add(new JButton("Refresh"));
buttonPanel.add(new JButton(new TitleAction("Title")));
buttonPanel.add(new JButton(new ExitAction("Exit")));
JPanel bottomPanel = new JPanel();
bottomPanel.setLayout(new BoxLayout(bottomPanel, BoxLayout.LINE_AXIS));
bottomPanel.add(Box.createHorizontalGlue());
bottomPanel.add(buttonPanel);
setLayout(new BorderLayout());
add(new JScrollPane(table), BorderLayout.CENTER);
add(bottomPanel, BorderLayout.PAGE_END);
}
private class TitleAction extends AbstractAction {
public TitleAction(String name) {
super(name);
int mnemonic = (int) name.charAt(0);
putValue(MNEMONIC_KEY, mnemonic);
}
#Override
public void actionPerformed(ActionEvent e) {
cardLayoutEg.showCard(TitlePanel.TITLE_PANEL);
}
}
private class ExitAction extends AbstractAction {
public ExitAction(String name) {
super(name);
int mnemonic = KeyEvent.VK_X;
putValue(MNEMONIC_KEY, mnemonic);
}
#Override
public void actionPerformed(ActionEvent e) {
Component component = (Component) e.getSource();
Window win = SwingUtilities.getWindowAncestor(component);
win.dispose();
}
}
}
So with the help of others here I finally managed to code a button that alternates the label "Hello World!" to "Hello Universe!" and back again. I used the code below, and used the same way to try and change the color, but it didn't work as expected. I've been searching for hours on this, but with no avail. Thank you for reading, anything helps!
Code:
package game;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Javagame extends JPanel implements ActionListener{
protected JButton changetext;
protected JButton red;
protected JButton green;
private JLabel label;
public Javagame() {
add(changetext = new JButton("Button!"));
changetext.setPreferredSize(new Dimension(50, 50));
changetext.setActionCommand("change");
add(red = new JButton("Red"));
red.setPreferredSize(new Dimension(50, 50));
red.setActionCommand("changecolorRed");
add(green = new JButton("Green"));
green.setPreferredSize(new Dimension(50, 50));
green.setActionCommand("changecolorGreen");
changetext.addActionListener(this);
label = new JLabel("Hello World!", SwingConstants.CENTER);
label.setFont(new Font("Arial", Font.BOLD, 20));
label.setForeground(new Color(0x009900));
setLayout(new BorderLayout());
add(label, BorderLayout.CENTER);
add(changetext, BorderLayout.NORTH);
add(red, BorderLayout.WEST);
add(green, BorderLayout.EAST);
}
public void actionPerformed(ActionEvent e) {
if ("change".equals(e.getActionCommand())) {
label.setText("Hello Universe!");
changetext.setActionCommand("changeBack");
}
if ("changeBack".equals(e.getActionCommand())) {
label.setText("Hello World!");
changetext.setActionCommand("change");
}
if ("changecolorRed".equals(e.getActionCommand())) {
label.setForeground(new Color(0xFF0000));
}
if ("changecolorGreen".equals(e.getActionCommand())) {
label.setForeground(new Color(0x009900));
}
}
private static void createWindow(){
JFrame frame = new JFrame("Javagame");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setPreferredSize(new Dimension(500,500));
JPanel panel = new JPanel(new BorderLayout());
Javagame newContentPane = new Javagame();
newContentPane.setOpaque(true);
frame.setContentPane(newContentPane);
frame.setLocationRelativeTo(null);
frame.pack();
frame.setVisible(true);
}
public static void main(String[] args) {
createWindow();
}
}
You need to add ActionListeners to buttons for them to work.
This is usually done via a simple method call: red.addActionListener(someListener);
Also:
get rid of your setPreferredsize(...) method calls, and instead let components set their own size. At the most you can override getPreferredSize() if need be, but try to limit that.
Avoid having your GUI code implement your listener interfaces as that leads to confusing and difficult to manage code. Better to use anonymous inner listeners or private inner classes or stand alone listener classes.
For example:
import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.Dimension;
import java.awt.Font;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.*;
public class JavaGame2 extends JPanel {
private static final int PREF_W = 600;
private static final int PREF_H = 400;
private static final Font LABEL_FONT = new Font("Arial", Font.BOLD, 20);
private static final Color[] FOREGROUNDS = { new Color(0x009900),
new Color(0x990000), new Color(0x000099), new Color(0x999900),
new Color(0x990099), new Color(0x009999) };
private static final String[] LABEL_TEXTS = { "Hello World!",
"Goodbye World!", "Hola Todo el Mundo!", "Hasta la Vista Baby!",
"Whatever!!" };
private JButton changetextButton;
private JButton changeColorButton;
private JLabel label;
private int labelTextIndex = 0;
private int foregroundIndex = 0;
public JavaGame2() {
label = new JLabel(LABEL_TEXTS[labelTextIndex], SwingConstants.CENTER);
label.setFont(LABEL_FONT);
label.setForeground(FOREGROUNDS[foregroundIndex]);
// example of anonymous inner ActionListener:
changetextButton = new JButton("Change Text");
changetextButton.addActionListener(new ActionListener() {
#Override
public void actionPerformed(ActionEvent evt) {
labelTextIndex++;
labelTextIndex %= LABEL_TEXTS.length;
label.setText(LABEL_TEXTS[labelTextIndex]);
}
});
// example of use of an anonymous AbstractAction:
changeColorButton = new JButton(new AbstractAction("Change Color") {
#Override
public void actionPerformed(ActionEvent e) {
foregroundIndex++;
foregroundIndex %= FOREGROUNDS.length;
label.setForeground(FOREGROUNDS[foregroundIndex]);
}
});
setLayout(new BorderLayout());
add(changetextButton, BorderLayout.NORTH);
add(changeColorButton, BorderLayout.SOUTH);
add(label, BorderLayout.CENTER);
}
#Override
public Dimension getPreferredSize() {
return new Dimension(PREF_W, PREF_H);
}
private static void createAndShowGui() {
JavaGame2 mainPanel = new JavaGame2();
JFrame frame = new JFrame("Java Game 2");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.getContentPane().add(mainPanel);
frame.pack();
frame.setLocationByPlatform(true);
frame.setVisible(true);
}
public static void main(String[] args) {
SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGui();
}
});
}
}
I am making a battleship game and I'm trying to figure out a way to control buttons in a pane so that I can drag drop them and keep track of their indexes with a default list model.If I add string or ImageIcons it works fine but with buttons I get something different.
Here's my code:
public class ListModelExample extends JPanel {
JList list;
DefaultListModel model;
int counter = 15;
public ListModelExample() {
setLayout(new BorderLayout());
model = new DefaultListModel();
list = new JList(model);
JScrollPane pane = new JScrollPane(list);
JButton addButton = new JButton("Add Element");
JButton removeButton = new JButton("Remove Element");
final JButton button = new JButton("button");
for (int i = 0; i < 5; i++)
model.addElement(button);
addButton.addActionListener(new ActionListener() {
#Override
public void actionPerformed(ActionEvent e) {
model.addElement(button);
counter++;
}
});
removeButton.addActionListener(new ActionListener() {
#Override
public void actionPerformed(ActionEvent e) {
if (model.getSize() > 0)
model.removeElementAt(0);
}
});
add(pane, BorderLayout.NORTH);
add(addButton, BorderLayout.WEST);
add(removeButton, BorderLayout.EAST);
}
public static void main(String s[]) {
JFrame frame = new JFrame("List Model Example");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setContentPane(new ListModelExample());
frame.setSize(260, 200);
frame.setVisible(true);
}
}
If I add Buttons I get this result:
So my question is: How is it possible to make buttons appear normally and not as text in a default list model?
this could be done only by Renderer, put only String value to the DefaultListModel
don't put any JComponents to the XxxModel
I'd be use JPanel with JButtons instead of JList as containers (required to change getScrollableBlockIncrement / getScrollableUnitIncrement for natural scrolling in compare with JList or JTable)
example about both a.m. ways
import java.awt.*;
import java.awt.event.AdjustmentEvent;
import java.awt.event.AdjustmentListener;
import javax.swing.*;
public class ListButtons extends JFrame {
private static final long serialVersionUID = 1L;
public ListButtons() {
setLayout(new GridLayout(0, 2, 10, 10));
DefaultListModel model = new DefaultListModel();
model.addElement(createButtons("one"));
model.addElement(createButtons("two"));
model.addElement(createButtons("three"));
model.addElement(createButtons("four"));
model.addElement(createButtons("five"));
model.addElement(createButtons("six"));
model.addElement(createButtons("seven"));
model.addElement(createButtons("eight"));
model.addElement(createButtons("nine"));
model.addElement(createButtons("ten"));
model.addElement(createButtons("eleven"));
model.addElement(createButtons("twelwe"));
JList list = new JList(model);
list.setCellRenderer(new PanelRenderer());
JScrollPane scroll1 = new JScrollPane(list);
final JScrollBar scrollBar = scroll1.getVerticalScrollBar();
scrollBar.addAdjustmentListener(new AdjustmentListener() {
#Override
public void adjustmentValueChanged(AdjustmentEvent e) {
System.out.println("JScrollBar's current value = " + scrollBar.getValue());
}
});
add(scroll1);
JScrollPane scroll2 = new JScrollPane(createPanel());
add(scroll2);
final JScrollBar scrollBar1 = scroll2.getVerticalScrollBar();
scrollBar1.addAdjustmentListener(new AdjustmentListener() {
#Override
public void adjustmentValueChanged(AdjustmentEvent e) {
System.out.println("JScrollBar's current value = " + scrollBar1.getValue());
}
});
}
public static JPanel createPanel() {
JPanel panel = new JPanel();
panel.setLayout(new GridLayout(0, 1, 1, 1));
panel.add(createButtons("one"));
panel.add(createButtons("two"));
panel.add(createButtons("three"));
panel.add(createButtons("four"));
panel.add(createButtons("five"));
panel.add(createButtons("six"));
panel.add(createButtons("seven"));
panel.add(createButtons("eight"));
panel.add(createButtons("nine"));
panel.add(createButtons("ten"));
panel.add(createButtons("eleven"));
panel.add(createButtons("twelwe"));
return panel;
}
public static JButton createButtons(String text) {
JButton button = new JButton(text);
return button;
}
public static void main(String[] args) {
SwingUtilities.invokeLater(new Runnable() {
public void run() {
ListButtons frame = new ListButtons();
frame.setDefaultCloseOperation(EXIT_ON_CLOSE);
//frame.pack();
frame.setSize(270, 200);
frame.setVisible(true);
}
});
}
class PanelRenderer implements ListCellRenderer {
public Component getListCellRendererComponent(JList list, Object value, int index, boolean isSelected, boolean cellHasFocus) {
JButton renderer = (JButton) value;
renderer.setBackground(isSelected ? Color.red : list.getBackground());
return renderer;
}
}
}
I just created an applet
public class HomeApplet extends JApplet {
private static final long serialVersionUID = -7650916407386219367L;
//Called when this applet is loaded into the browser.
public void init() {
//Execute a job on the event-dispatching thread; creating this applet's GUI.
// setSize(400, 400);
try {
SwingUtilities.invokeAndWait(new Runnable() {
public void run() {
createGUI();
}
});
} catch (Exception e) {
System.err.println("createGUI didn't complete successfully");
}
}
private void createGUI() {
RconSection rconSection = new RconSection();
rconSection.setOpaque(true);
// CommandArea commandArea = new CommandArea();
// commandArea.setOpaque(true);
JTabbedPane tabbedPane = new JTabbedPane();
// tabbedPane.setSize(400, 400);
tabbedPane.addTab("Rcon Details", rconSection);
// tabbedPane.addTab("Commad Area", commandArea);
setContentPane(tabbedPane);
}
}
where the fisrt tab is:
package com.rcon;
import java.awt.BorderLayout;
import java.awt.GridLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JLabel;
import javax.swing.JOptionPane;
import javax.swing.JPanel;
import javax.swing.JTextField;
import com.Bean.RconBean;
import com.util.Utility;
public class RconSection extends JPanel implements ActionListener{
/**
*
*/
private static final long serialVersionUID = -9021500288377975786L;
private static String TEST_COMMAND = "test";
private static String CLEAR_COMMAND = "clear";
private static JTextField ipText = new JTextField();
private static JTextField portText = new JTextField();
private static JTextField rPassText = new JTextField();
// private DynamicTree treePanel;
public RconSection() {
// super(new BorderLayout());
JLabel ip = new JLabel("IP");
JLabel port = new JLabel("Port");
JLabel rPass = new JLabel("Rcon Password");
JButton testButton = new JButton("Test");
testButton.setActionCommand(TEST_COMMAND);
testButton.addActionListener(this);
JButton clearButton = new JButton("Clear");
clearButton.setActionCommand(CLEAR_COMMAND);
clearButton.addActionListener(this);
JPanel panel = new JPanel(new GridLayout(3,2));
panel.add(ip);
panel.add(ipText);
panel.add(port);
panel.add(portText);
panel.add(rPass);
panel.add(rPassText);
JPanel panel1 = new JPanel(new GridLayout(1,3));
panel1.add(testButton);
panel1.add(clearButton);
add(panel);
add(panel1);
// add(panel, BorderLayout.NORTH);
// add(panel1, BorderLayout.SOUTH);
}
#Override
public void actionPerformed(ActionEvent arg0) {
if(arg0.getActionCommand().equals(TEST_COMMAND)){
String ip = ipText.getText().trim();
if(!Utility.checkIp(ip)){
ipText.requestFocusInWindow();
ipText.selectAll();
JOptionPane.showMessageDialog(this,"Invalid Ip!!!");
return;
}
String port = portText.getText().trim();
if(port.equals("") || !Utility.isIntNumber(port)){
portText.requestFocusInWindow();
portText.selectAll();
JOptionPane.showMessageDialog(this,"Invalid Port!!!");
return;
}
String pass = rPassText.getText().trim();
if(pass.equals("")){
rPassText.requestFocusInWindow();
rPassText.selectAll();
JOptionPane.showMessageDialog(this,"Enter Rcon Password!!!");
return;
}
RconBean rBean = RconBean.getBean();
rBean.setIp(ip);
rBean.setPassword(pass);
rBean.setPort(Integer.parseInt(port));
if(!Utility.testConnection()){
rPassText.requestFocusInWindow();
rPassText.selectAll();
JOptionPane.showMessageDialog(this,"Invalid Rcon!!!");
return;
}else{
JOptionPane.showMessageDialog(this,"Correct Rcon!!!");
return;
}
}
else if(arg0.getActionCommand().equals(CLEAR_COMMAND)){
ipText.setText("");
portText.setText("");
rPassText.setText("");
}
}
}
it appears as
is has cropped some data how to display it full and make the applet non resizable as well. i tried setSize(400, 400); but it didnt helped the inner area remains the same and outer boundaries increases
Here's another variation on your layout. Using #Andrew's tag-in-source method, it's easy to test from the command line:
$ /usr/bin/appletviewer HomeApplet.java
// <applet code='HomeApplet' width='400' height='200'></applet>
import java.awt.BorderLayout;
import java.awt.GridLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JApplet;
import javax.swing.JButton;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JTabbedPane;
import javax.swing.JTextField;
import javax.swing.SwingUtilities;
public class HomeApplet extends JApplet {
#Override
public void init() {
try {
SwingUtilities.invokeAndWait(new Runnable() {
#Override
public void run() {
createGUI();
}
});
} catch (Exception e) {
e.printStackTrace(System.err);
}
}
private void createGUI() {
JTabbedPane tabbedPane = new JTabbedPane();
tabbedPane.addTab("Rcon1", new RconSection());
tabbedPane.addTab("Rcon2", new RconSection());
this.add(tabbedPane);
}
private static class RconSection extends JPanel implements ActionListener {
private static final String TEST_COMMAND = "test";
private static final String CLEAR_COMMAND = "clear";
private JTextField ipText = new JTextField();
private JTextField portText = new JTextField();
private JTextField rPassText = new JTextField();
public RconSection() {
super(new BorderLayout());
JLabel ip = new JLabel("IP");
JLabel port = new JLabel("Port");
JLabel rPass = new JLabel("Rcon Password");
JButton testButton = new JButton("Test");
testButton.setActionCommand(TEST_COMMAND);
testButton.addActionListener(this);
JButton clearButton = new JButton("Clear");
clearButton.setActionCommand(CLEAR_COMMAND);
clearButton.addActionListener(this);
JPanel panel = new JPanel(new GridLayout(3, 2));
panel.add(ip);
panel.add(ipText);
panel.add(port);
panel.add(portText);
panel.add(rPass);
panel.add(rPassText);
JPanel buttons = new JPanel(); // default FlowLayout
buttons.add(testButton);
buttons.add(clearButton);
add(panel, BorderLayout.NORTH);
add(buttons, BorderLayout.SOUTH);
}
#Override
public void actionPerformed(ActionEvent e) {
System.out.println(e);
}
}
}
As I mentioned in a comment, this question is really about how to layout components in a container. This example presumes you wish to add the extra space to the text fields and labels. The size of the applet is set in the HTML.
200x130 200x150
/*
<applet
code='FixedSizeLayout'
width='200'
height='150'>
</applet>
*/
import java.awt.*;
import javax.swing.*;
public class FixedSizeLayout extends JApplet {
public void init() {
SwingUtilities.invokeLater(new Runnable() {
public void run() {
initGui();
}
});
}
private void initGui() {
JTabbedPane tb = new JTabbedPane();
tb.addTab("Rcon Details", new RconSection());
setContentPane(tb);
validate();
}
}
class RconSection extends JPanel {
private static String TEST_COMMAND = "test";
private static String CLEAR_COMMAND = "clear";
private static JTextField ipText = new JTextField();
private static JTextField portText = new JTextField();
private static JTextField rPassText = new JTextField();
public RconSection() {
super(new BorderLayout(3,3));
JLabel ip = new JLabel("IP");
JLabel port = new JLabel("Port");
JLabel rPass = new JLabel("Rcon Password");
JButton testButton = new JButton("Test");
testButton.setActionCommand(TEST_COMMAND);
JButton clearButton = new JButton("Clear");
clearButton.setActionCommand(CLEAR_COMMAND);
JPanel panel = new JPanel(new GridLayout(3,2));
panel.add(ip);
panel.add(ipText);
panel.add(port);
panel.add(portText);
panel.add(rPass);
panel.add(rPassText);
JPanel panel1 = new JPanel(new FlowLayout(FlowLayout.CENTER,5,5));
panel1.add(testButton);
panel1.add(clearButton);
add(panel, BorderLayout.CENTER);
add(panel1, BorderLayout.SOUTH);
}
public static void main(String[] args) {
SwingUtilities.invokeLater(new Runnable() {
public void run() {
Container c = new RconSection();
JOptionPane.showMessageDialog(null, c);
}
});
}
}
Size of applet viewer does not depend on your code.
JApplet is not window, so in java code you can't write japplet dimensions. You have to change run settings. I don't know where exactly are in other ide's, but in Eclipse you can change dimensions in Project Properties -> Run/Debug settings -> click on your launch configurations file (for me there were only 1 - main class) -> edit -> Parameters. There you can choose width and height for your applet. save changes and you are good to go