I am created two bodies in Box2d, they are: Player and Platform;
I wanted to create game like Doodle Jump, but I don't know how to create "infinite world with generating platforms";
There is my code where I am creating Array:
buckets = new Array<Bucket>();
for(int i=1;i<BUCKET_COUNT;i++){
buckets.add(new Bucket(W/2,BUCKET_MARGIN*i, world));
}
And this code where I am "Trying" to change position of each platform when camera position is change:
for(Bucket bucket : buckets){
if(cam.position.y - (cam.viewportHeight/2) > bucket.getBody().getPosition().y + 22/PPM){
bucket.repos(W/2,bucket.getBody().getPosition().y + BUCKET_MARGIN);
}
}
It works! But it changes last platform position to very far bottom:
Regarding how to create an infinite world?
Use the world instance shift origin method. In the Box2D 2.3.2 C++ library code, this is the b2World::ShiftOrigin(const b2Vec2& newOrigin) method. Here's an excerpt of this method's declaration along with its documentation:
/// Shift the world origin. Useful for large worlds.
/// The body shift formula is: position -= newOrigin
/// #param newOrigin the new origin with respect to the old origin
void ShiftOrigin(const b2Vec2& newOrigin);
In Java, you should be able to find a similar interface method.
With shift origin you keep the viewport to the physics world centered on (or near) the physical world origin (of 0, 0). This is basically the practical means of accomplishing what Yevhen Danchenko suggested in the comments.
A reason for using this is that the implementation of floating-point arithmetic which Box2D relies on, is itself not infinitely wide ranging nor infinitely accurate. So shifting things helps keep things closer to the origin where the floating-point values are more accurate and keeps things from going off the range of practically usable values assuming that you'll only ever be showing a limited range of x and y values.
The zero-crossing rate is the rate of sign-changes along a signal, i.e., the rate at which the signal changes from positive to negative or back.
The zero-crossing rate Zn can be used to:
1-Distinguish voiced/unvoiced speech
2-Seperate unvoiced speech from static background noise.
It is a simple (yet effective) way to distinguish between
voiced and unvoiced speech regions:
• Voiced region: lower zero-crossing rate
• Unvoiced region: higher zero-crossing rate
and here is the code i am using:
public double evaluate(){
int numZC=0;
int size=signals.length;
for (int i=0; i<size-1; i++){
if((signals[i]>=0 && signals[i+1]<0) || (signals[i]<0 && signals[i+1]>=0)){
numZC++;
}
}
return numZC/lengthInSecond;
}
MY questions are:
1- My goal of using zero crossing is to eliminate the unvoiced part of the signal,,, and this code gives back the ZERO-CROSSING RATE. SO how will i do that?!
2- How will i know how much is a "low" zero-crossing rate and how much is a "high" zero-crossing rate???
The fundamental problem is that while you've found a way to calculate the zero crossing rate of a block of samples, you can't use that to distinguish sounds within that block because it only gives you one number that describes your entire block.
One potential solution is to divide your big block into small blocks, and then work on those. If you do that, you will soon find that your small blocks, which you made arbitrarily, don't fit into neat categories of voiced and unvoiced, and simply removing one block or setting a block's volume to zero will leave you with "choppy" sounds or even harsh clicking sounds, and won't divide the parts of speech as cleanly as you like.
This may be a worthwhile point to start with, because it's closer to your existing code, but it won't work out in the long run, unless you are just looking to do something rough (in which case, this might be good enough!).
To resolve this, you may want to consider calculating an "instantaneous zero crossing rate"1 that updates the Zr for each sample.
My goal of using zero crossing is to eliminate the unvoiced part of the signal,,, and this code gives back the ZERO-CROSSING RATE. SO how will i do that?! It's not clear what you want. What do you mean by "eliminate"? Do you want silence or do you want to skip those sections? For silence, simply replace the unwanted sections with zero. To skip, simply remove those samples. Of course, you will still end up with clicks and pops, but I assume you know how to get rid of that. If not, maybe you can read up on linear interpolation. Keep in mind that you will almost certainly have to apply some heuristics like "don't remove any sections that are smaller than n samples".
How will i know how much is a "low" zero-crossing rate and how much is a "high" zero-crossing rate??? I would guess a good threshold will be roughly around 400Hz, but speech is not my specialty. Moreover it will vary a bit by speaker and possibly by language and other factors. I suggest you make some samples and see for yourself.
1 this name is a bit misleading and you could say "there's no such thing as an instantaneous zero crossing rate". I'm not here to argue that; rather I want to use that phrase because it expresses what I mean and I hope you understand it. Suffice it to say you should do your best to update Zr as often as you can. eg. something like this:
int lastSign = 0;
int lastCrossing = 0;
float nextZeroCrossing( float newSample ) {
int thisSign = newSample > 0 ? 1 : -1 ;
if( thisSign != lastSign ) {
lastSign = thisSign;
//zero crossing has happened. Update our estimate of Zr using lastCrossing and return that
} else {
++lastCrossing;
//zero crossing has not happened. Return existing Zr
}
}
You may want to "smooth" the output of nextZeroCrossing(), as it will tend to jump around a lot. A simple exponential or moving average filter will work great.
I have been trying to follow the example here, but it is not working, and I have not been able to find any other sources:
[ http://www.softsynth.com/jsyn/tutorial/osc_control.php ][1]
As far as I can tell, I have followed this sample code snippet exactly (except that I found out that AddUnit changed to Add sometime since that webpage was updated):
[...]make the frequency to waver slightly about a central frequency that is in a more useful range. We can do this by using an AddUnit to add the output of an oscillator to a constant value that we can set. We can also reduce the amplitude of the first oscillator to be within a smaller range.
AddUnit freqAdder = new AddUnit();
sineOsc1.output.connect( freqAdder.inputA ); // pass through adder
freqAdder.output.connect( sineOsc2.frequency ); // control second oscillator freq
freqAdder.inputB.set( 500.0 ); // add constant that will center us at 500 Hz
sineOsc1.amplitude.set( 100.0 ); // reduce offset to +/- 100 Hz
Thus the frequency of sineOsc2 will be sineOsc1.output plus inputB.
Can anybody see what is wrong with my code (below)? I already have a simple oscillator sound working. I just can't hear this second, more complicated sound, which is supposed to be siren-like.
It may be a problem with my coding of the siren sound, or it may just be a problem with my coding of generating two sounds. (Are 2 Synthesizers required? I have tried it with 1 and 2 Synthesizers.) (Are 2 lineOuts required? Other web sources say "no".)
Here is my code with 2 synthesizers and 1 output:
(Comments in quotes are from other sample code. I only understand a little of what those comments are getting at.)
import com.jsyn.JSyn;
import com.jsyn.Synthesizer;
import com.jsyn.unitgen.Add;
import com.jsyn.unitgen.LineOut;
import com.jsyn.unitgen.SineOscillator;
[...]
com.jsyn.Synthesizer synthPCMSonification = JSyn.createSynthesizer();
com.jsyn.Synthesizer synthPCMAlarm = JSyn.createSynthesizer();
// "an instance of Synthesizer"
com.jsyn.unitgen.SineOscillator oscData = new SineOscillator();
SineOscillator oscAlarmWaverEnvelope = new SineOscillator();
SineOscillator oscAlarmComplete = new SineOscillator();
// "a unit"
com.jsyn.unitgen.LineOut oscsLineOut = new LineOut();
// "a unit"
[...]
// "start synthesis engine"
synthPCMSonification.start();
synthPCMAlarm.start();
// "build unit generators"
synthPCMSonification.add(oscData);
//synthPCM.add(oscAlarmWaverEnvelope); //TODO: Figure out if need line
synthPCMAlarm.add(oscAlarmComplete);
synthPCMSonification.add(oscsLineOut);
synthPCMAlarm.add(oscsLineOut);
oscData.frequency.set(LOWEST_FREQUENCY_C);
oscData.amplitude.set(volSonification);
//create a frequency adder for a siren-like alarm
com.jsyn.unitgen.Add oscAlarmFreqAdder = new Add(); //used to be AddUnit
//set the alarm centre frequency
alarmCentreFreq = (LOWEST_FREQUENCY_C
* Math.pow(2, OCTAVES_SPANNED_C + 1));
//This formula centres the alarm one octave
//above the threshold's sonification freqency
alarmWaverFreq = alarmCentreFreq / 10;
//This sets the waver at one tenth of the centre freq
//Unfortunately, the waver appears to need to be the
//same amount above and below the centre
//(linear, vice perceptually-linear (exponential))
System.out.println(alarmCentreFreq + "-Hz alarm centre frequency");
oscAlarmFreqAdder.inputB.set(alarmCentreFreq);
//set the alarm waver envelope
//(alarm will range between centre-waver and centre+waver)
oscAlarmWaverEnvelope.frequency.set(alarmCentreFreq / 10);
//"pass through adder" (??)
oscAlarmWaverEnvelope.output.connect(oscAlarmFreqAdder.inputA);
//(entered this with by starting to type, then hitting [Ctrl]+[Space]!)
//"control the 2nd oscillator frequency" (?)
oscAlarmFreqAdder.output.connect(oscAlarmComplete.frequency);
//set alarm volume
oscAlarmComplete.amplitude.set(volAlarm);
// "connect unit generators"
// connect oscillator to both channels of stereo player
oscAlarmComplete.output.connect(0, oscsLineOut.input, 0);
oscAlarmComplete.output.connect(0, oscsLineOut.input, 1);
// "startUnitGenerators"
// "start execution of units. JSyn 'pulls' data so the only unit
// you have to start() is the last one, in this case our LineOut"
oscsLineOut.start();
How many people out there know and use JSyn? How about meta-oscillators?
If you have ever connected different JSyn parts together, or even just got it to output more than one sound at once, you know more than I do...
There are a number of things that could be improved here.
1) You created two synthesizers:
com.jsyn.Synthesizer synthPCMSonification = JSyn.createSynthesizer();
com.jsyn.Synthesizer synthPCMAlarm = JSyn.createSynthesizer();
That is only needed if you are running some synthesis in non-real-time or at a different sample rate. I highly recommend only using one synthesizer. Connecting units across synthesizers or running the same unit on both synthesizers will cause problems. I suspect that is the main error.
You can have multiple LineOut units in one synth. Or you can mix automatically by connecting multiple units to the LineOut.
2) I recommend starting with just one oscillator connected to a LineOut. After you can get that to make sound, add the modulation.
3) You can get exponential frequency (pitch) modulation using the optimized PowerOfTwo unit.
http://www.softsynth.com/jsyn/docs/javadocs/com/jsyn/unitgen/PowerOfTwo.html
Connect the LFO to a PowerOfTwo unit. Then use a Multiply unit to scale the center frequency. An LFO that goes from +1.0 to -1.0 will scale the frequency up and down an octave.
4) The tutorial uses the old JSyn API. I need to update it. Note that in the new JSyn API you rarely need an Add unit because the input ports will automatically sum any connected inputs.
5) StackOverflow is great but you can get support from the JSyn community of over 600 people by signing up for the JSyn mail list.
http://www.softsynth.com/jsyn/support/index.php
(Note: I really wanted to just add this to the answer #philburk gave, as his answer certainly helped, but my requests to add this to his answer were rejected, so I have to give this as a separate answer. I am torn on whether I should move the 'accept' to this answer or not, though, even though this is the actual fix.)
The code in the question can be fixed by adding (or changing to, in the case of the frequency line) the following lines of code:
synthPCM.add(oscAlarmWaverEnvelope) //(this is the line I already suspected I needed)
oscAlarmWaverEnvelope.frequency.set(4.0);
oscAlarmWaverEnvelope.amplitude.set(alarmCentreFreq / 10);
...meaning:
An oscillator still needs to be connected to the synthesizer even if it will not be heard directly (and a line like this was missing from the sample code, probably because the sample code assumed a person had some previous sample code from the tutorial in it).
An envelope oscillator should be set to a very low frequency in order for its effect to be heard.
An envelope oscillator should be given an amplitude, and this needs to be on the order of the frequency being altered in order for its effect to be heard.
I've started differentiating two images by counting the number of different pixels using a simple algorithm:
private int returnCountOfDifferentPixels(String pic1, String pic2)
{
Bitmap i1 = loadBitmap(pic1);
Bitmap i2 = loadBitmap(pic2);
int count=0;
for (int y = 0; y < i1.getHeight(); ++y)
for (int x = 0; x < i1.getWidth(); ++x)
if (i1.getPixel(x, y) != i2.getPixel(x, y))
{
count++;
}
return count;
}
However this approach seems to be inefficient in its initial form, as there is always a very high number of pixels which differ even in very similar photos.
I was thinking of a way of to determine if two pixels are really THAT different.
the bitmap.getpixel(x,y) from android returns a Color object.
How can I implement a proper differentiation between two Color objects, to help with my motion detection?
You are right, because of noise and other factors there is usually a lot of raw pixel change in a video stream. Here are some options you might want to consider:
Blurring the image first, ideally with a Gaussian filter or with a simple box filter. This just means that you take the (weighted) average over the neighboring pixel and the pixel itself. This should reduce the sensor noise quite a bit already.
Only adding the difference to count if it's larger than some threshold. This has the effect of only considering pixels that have really changed a lot. This is very easy to implement and might already solve your problem alone.
Thinking about it, try these two options first. If they don't work out, I can give you some more options.
EDIT: I just saw that you're not actually summing up differences but just counting different pixels. This is fine if you combine it with Option 2. Option 1 still works, but it might be an overkill.
Also, to find out the difference between two colors, use the methods of the Color class:
int p1 = i1.getPixel(x, y);
int p2 = i2.getPixel(x, y);
int totalDiff = Color.red(p1) - Color.red(p2) + Color.green(p1) - Color.green(p2) + Color.blue(p1) - Color.blue(p2);
Now you can come up with a threshold the totalDiff must exceed to contribute to count.
Of course, you can play around with these numbers in various ways. The above code for example only computes changes in pixel intensity (brightness). If you also wanted to take into account changes in hue and saturation, you would have to compute totalDifflike this:
int totalDiff = Math.abs(Color.red(p1) - Color.red(p2)) + Math.abs(Color.green(p1) - Color.green(p2)) + Math.abs(Color.blue(p1) - Color.blue(p2));
Also, have a look at the other methods of Color, for example RGBToHSV(...).
I know that this is essentially very similar another answer here but I think be restating it in a different form it might prove useful to those seeking the solution. This involves have more than two images over time. If you only literally then this will not work but an equivilent method will.
Do the history for all pixels on each frame. For example, for each pixel:
history[x, y] = (history[x, y] * (w - 1) + get_pixel(x, y)) / w
Where w might be w = 20. The higher w the larger the spike for motion but the longer motion has to be missing for it to reset.
Then to determine if something has changed you can do this for each pixel:
changed_delta = abs(history[x, y] - get_pixel(x, y))
total_delta += changed_delta
You will find that it stabilizes most of the noise and when motion happens you will get a large difference. You are essentially taking many frames and detecting motion from the many against the newest frame.
Also, for detecting positions of motion consider breaking the image into smaller pieces and doing them individually. Then you can find objects and track them across the screen by treating a single image as a grid of separate images.
Any clever ideas on how to generate random coordinates (latitude / longitude) of places on Earth? Latitude / Longitude. Precision to 5 points and avoid bodies of water.
double minLat = -90.00;
double maxLat = 90.00;
double latitude = minLat + (double)(Math.random() * ((maxLat - minLat) + 1));
double minLon = 0.00;
double maxLon = 180.00;
double longitude = minLon + (double)(Math.random() * ((maxLon - minLon) + 1));
DecimalFormat df = new DecimalFormat("#.#####");
log.info("latitude:longitude --> " + df.format(latitude) + "," + df.format(longitude));
Maybe i'm living in a dream world and the water topic is unavoidable ... but hopefully there's a nicer, cleaner and more efficient way to do this?
EDIT
Some fantastic answers/ideas -- however, at scale, let's say I need to generate 25,000 coordinates. Going to an external service provider may not be the best option due to latency, cost and a few other factors.
To deal with the body of water problem is going to be largely a data issue, e.g. do you just want to miss the oceans or do you need to also miss small streams. Either you need to use a service with the quality of data that you need, or, you need to obtain the data yourself and run it locally. From your edit, it sounds like you want to go the local data route, so I'll focus on a way to do that.
One method is to obtain a shapefile for either land areas or water areas. You can then generate a random point and determine if it intersects a land area (or alternatively, does not intersect a water area).
To get started, you might get some low resolution data here and then get higher resolution data here for when you want to get better answers on coast lines or with lakes/rivers/etc. You mentioned that you want precision in your points to 5 decimal places, which is a little over 1m. Do be aware that if you get data to match that precision, you will have one giant data set. And, if you want really good data, be prepared to pay for it.
Once you have your shape data, you need some tools to help you determine the intersection of your random points. Geotools is a great place to start and probably will work for your needs. You will also end up looking at opengis code (docs under geotools site - not sure if they consumed them or what) and JTS for the geometry handling. Using this you can quickly open the shapefile and start doing some intersection queries.
File f = new File ( "world.shp" );
ShapefileDataStore dataStore = new ShapefileDataStore ( f.toURI ().toURL () );
FeatureSource<SimpleFeatureType, SimpleFeature> featureSource =
dataStore.getFeatureSource ();
String geomAttrName = featureSource.getSchema ()
.getGeometryDescriptor ().getLocalName ();
ResourceInfo resourceInfo = featureSource.getInfo ();
CoordinateReferenceSystem crs = resourceInfo.getCRS ();
Hints hints = GeoTools.getDefaultHints ();
hints.put ( Hints.JTS_SRID, 4326 );
hints.put ( Hints.CRS, crs );
FilterFactory2 ff = CommonFactoryFinder.getFilterFactory2 ( hints );
GeometryFactory gf = JTSFactoryFinder.getGeometryFactory ( hints );
Coordinate land = new Coordinate ( -122.0087, 47.54650 );
Point pointLand = gf.createPoint ( land );
Coordinate water = new Coordinate ( 0, 0 );
Point pointWater = gf.createPoint ( water );
Intersects filter = ff.intersects ( ff.property ( geomAttrName ),
ff.literal ( pointLand ) );
FeatureCollection<SimpleFeatureType, SimpleFeature> features = featureSource
.getFeatures ( filter );
filter = ff.intersects ( ff.property ( geomAttrName ),
ff.literal ( pointWater ) );
features = featureSource.getFeatures ( filter );
Quick explanations:
This assumes the shapefile you got is polygon data. Intersection on lines or points isn't going to give you what you want.
First section opens the shapefile - nothing interesting
you have to fetch the geometry property name for the given file
coordinate system stuff - you specified lat/long in your post but GIS can be quite a bit more complicated. In general, the data I pointed you at is geographic, wgs84, and, that is what I setup here. However, if this is not the case for you then you need to be sure you are dealing with your data in the correct coordinate system. If that all sounds like gibberish, google around for a tutorial on GIS/coordinate systems/datum/ellipsoid.
generating the coordinate geometries and the filters are pretty self-explanatory. The resulting set of features will either be empty, meaning the coordinate is in the water if your data is land cover, or not empty, meaning the opposite.
Note: if you do this with a really random set of points, you are going to hit water pretty often and it could take you a while to get to 25k points. You may want to try to scope your point generation better than truly random (like remove big chunks of the Atlantic/Pacific/Indian oceans).
Also, you may find that your intersection queries are too slow. If so, you may want to look into creating a quadtree index (qix) with a tool like GDAL. I don't recall which index types are supported by geotools, though.
This has being asked a long time ago and I now have the similar need. There are two possibilities I am looking into:
1. Define the surface ranges for the random generator.
Here it's important to identify the level of precision you are going for. The easiest way would be to have a very relaxed and approximate approach. In this case you can divide the world map into "boxes":
Each box has it's own range of lat lon. Then you first randomise to get a random box, then you randomise to get a random lat and random long within the boundaries of that box.
Precisions is of course not the best at all here... Though it depends:) If you do your homework well and define a lot of boxes covering most complex surface shapes - you might be quite ok with the precision.
2. List item
Some API to return continent name from coordinates OR address OR country OR district = something that WATER doesn't have. Google Maps API's can help here. I didn't research this one deeper, but I think it's possible, though you will have to run the check on each generated pair of coordinates and rerun IF it's wrong. So you can get a bit stuck if random generator keeps throwing you in the ocean.
Also - some water does belong to countries, districts...so yeah, not very precise.
For my needs - I am going with "boxes" because I also want to control exact areas from which the random coordinates are taken and don't mind if it lands on a lake or river, just not open ocean:)
Download a truckload of KML files containing land-only locations.
Extract all coordinates from them this might help here.
Pick them at random.
Definitely you should have a map as a resource. You can take it here: http://www.naturalearthdata.com/
Then I would prepare 1bit black and white bitmap resource with 1s marking land and 0x marking water.
The size of bitmap depends on your required precision. If you need 5 degrees then your bitmap will be 360/5 x 180/5 = 72x36 pixels = 2592 bits.
Then I would load this bitmap in Java, generate random integer withing range above, read bit, and regenerate if it was zero.
P.S. Also you can dig here http://geotools.org/ for some ready made solutions.
To get a nice even distribution over latitudes and longitudes you should do something like this to get the right angles:
double longitude = Math.random() * Math.PI * 2;
double latitude = Math.acos(Math.random() * 2 - 1);
As for avoiding bodies of water, do you have the data for where water is already? Well, just resample until you get a hit! If you don't have this data already then it seems some other people have some better suggestions than I would for that...
Hope this helps, cheers.
There is another way to approach this using the Google Earth Api. I know it is javascript, but I thought it was a novel way to solve the problem.
Anyhow, I have put together a full working solution here - notice it works for rivers too: http://www.msa.mmu.ac.uk/~fraser/ge/coord/
The basic idea I have used is implement the hiTest method of the GEView object in the Google Earth Api.
Take a look at the following example of the hitest from Google.
http://earth-api-samples.googlecode.com/svn/trunk/examples/hittest.html
The hitTest method is supplied a random point on the screen in (pixel coordinates) for which it returns a GEHitTestResult object that contains information about the geographic location corresponding to the point. If one uses the GEPlugin.HIT_TEST_TERRAIN mode with the method one can limit results only to land (terrain) as long as we screen the results to points with an altitude > 1m
This is the function I use that implements the hitTest:
var hitTestTerrain = function()
{
var x = getRandomInt(0, 200); // same pixel size as the map3d div height
var y = getRandomInt(0, 200); // ditto for width
var result = ge.getView().hitTest(x, ge.UNITS_PIXELS, y, ge.UNITS_PIXELS, ge.HIT_TEST_TERRAIN);
var success = result && (result.getAltitude() > 1);
return { success: success, result: result };
};
Obviously you also want to have random results from anywhere on the globe (not just random points visible from a single viewpoint). To do this I move the earth view after each successful hitTestTerrain call. This is achieved using a small helper function.
var flyTo = function(lat, lng, rng)
{
lookAt.setLatitude(lat);
lookAt.setLongitude(lng);
lookAt.setRange(rng);
ge.getView().setAbstractView(lookAt);
};
Finally here is a stripped down version of the main code block that calls these two methods.
var getRandomLandCoordinates = function()
{
var test = hitTestTerrain();
if (test.success)
{
coords[coords.length] = { lat: test.result.getLatitude(), lng: test.result.getLongitude() };
}
if (coords.length <= number)
{
getRandomLandCoordinates();
}
else
{
displayResults();
}
};
So, the earth moves randomly to a postition
The other functions in there are just helpers to generate the random x,y and random lat,lng numbers, to output the results and also to toggle the controls etc.
I have tested the code quite a bit and the results are not 100% perfect, tweaking the altitude to something higher, like 50m solves this but obviously it is diminishing the area of possible selected coordinates.
Obviously you could adapt the idea to suit you needs. Maybe running the code multiple times to populate a database or something.
As a plan B, maybe you can pick a random country and then pick a random coordinate inside of this country. To be fair when picking a country, you can use its area as weight.
There is a library here and you can use its .random() method to get a random coordinate. Then you can use GeoNames WebServices to determine whether it is on land or not. They have a list of webservices and you'll just have to use the right one. GeoNames is free and reliable.
Go there http://wiki.openstreetmap.org/
Try to use API: http://wiki.openstreetmap.org/wiki/Databases_and_data_access_APIs
I guess you could use a world map, define a few points on it to delimit most of water bodies as you say and use a polygon.contains method to validate the coordinates.
A faster algorithm would be to use this map, take some random point and check the color beneath, if it's blue, then water... when you have the coordinates, you convert them to lat/long.
You might also do the blue green thing , and then store all the green points for later look up. This has the benifit of being "step wise" refinable. As you figure out a better way to make your list of points you can just point your random graber at a more and more acurate group of points.
Maybe a service provider has an answer to your question already: e.g. https://www.google.com/enterprise/marketplace/viewListing?productListingId=3030+17310026046429031496&pli=1
Elevation api? http://code.google.com/apis/maps/documentation/elevation/ above sea level or below? (no dutch points for you!)
Generating is easy, the Problem is that they should not be on water. I would import the "Open Streetmap" for example here http://ftp.ecki-netz.de/osm/ and import it to an Database (verry easy data Structure). I would suggest PostgreSQL, it comes with some geo functions http://www.postgresql.org/docs/8.2/static/functions-geometry.html . For that you have to save the points in a "polygon"-column, then you can check with the "&&" operator if it is in an Water polygon. For the attributes of an OpenStreetmap Way-Entry you should have a look at http://wiki.openstreetmap.org/wiki/Category:En:Keys
Supplementary to what bsimic said about digging into GeoNames' Webservices, here is a shortcut:
they have a dedicated WebService for requesting an ocean name.
(I am aware the of OP's constraint to not using public web services due to the amount of requests. Nevertheless I stumbled upon this with the same basic question and consider this helpful.)
Go to http://www.geonames.org/export/web-services.html#astergdem and have a look at "Ocean / reverse geocoding". It is available as XML and JSON. Create a free user account to prevent daily limits on the demo account.
Request example on ocean area (Baltic Sea, JSON-URL):
http://api.geonames.org/oceanJSON?lat=54.049889&lng=10.851388&username=demo
results in
{
"ocean": {
"distance": "0",
"name": "Baltic Sea"
}
}
while some coordinates on land result in
{
"status": {
"message": "we are afraid we could not find an ocean for latitude and longitude :53.0,9.0",
"value": 15
}
}
Do the random points have to be uniformly distributed all over the world? If you could settle for a seemingly uniform distribution, you can do this:
Open your favorite map service, draw a rectangle inside the United States, Russia, China, Western Europe and definitely the northern part of Africa - making sure there are no big lakes or Caspian seas inside the rectangles. Take the corner coordinates of each rectangle, and then select coordinates at random inside those rectangles.
You are guaranteed non of these points will be on any sea or lake. You might find an occasional river, but I'm not sure how many geoservices are going to be accurate enough for that anyway.
This is an extremely interesting question, from both a theoretical and practical perspective. The most suitable solution will largely depend on your exact requirements. Do you need to account for every body of water, or just the major seas and oceans? How critical are accuracy and correctness; Will identifying sea as land or vice-versa be a catastrophic failure?
I think machine learning techniques would be an excellent solution to this problem, provided that you don't mind the (hopefully small) probability that a point of water is incorrectly classified as land. If that's not an issue, then this approach should have a number of advantages against other techniques.
Using a bitmap is a nice solution, simple and elegant. It can be produced to a specified accuracy and the classification is guaranteed to be correct (Or a least as correct as you made the bitmap). But its practicality is dependent on how accurate you need the solution to be. You mention that you want the coordinate accuracy to 5 decimal places (which would be equivalent to mapping the whole surface of the planet to about the nearest metre). Using 1 bit per element, the bitmap would weigh in at ~73.6 terabytes!
We don't need to store all of this data though; We only need to know where the coastlines are. Just by knowing where a point is in relation to the coast, we can determine whether it is on land or sea. As a rough estimate, the CIA world factbook reports that there are 22498km of coastline on Earth. If we were to store coordiates for every metre of coastline, using a 32 bit word for each latitude and longitude, this would take less than 1.35GB to store. It's still a lot if this is for a trivial application, but a few orders of magnitude less than using a bitmap. If having such a high degree of accuracy isn't neccessary though, these numbers would drop considerably. Reducing the mapping to only the nearest kilometre would make the bitmap just ~75GB and the coordinates for the world's coastline could fit on a floppy disk.
What I propose is to use a clustering algorithm to decide whether a point is on land or not. We would first need a suitably large number of coordinates that we already know to be on either land or sea. Existing GIS databases would be suitable for this. Then we can analyse the points to determine clusters of land and sea. The decision boundary between the clusters should fall on the coastlines, and all points not determining the decision boundary can be removed. This process can be iterated to give a progressively more accurate boundary.
Only the points determining the decision boundary/the coastline need to be stored, and by using a simple distance metric we can quickly and easily decide if a set of coordinates are on land or sea. A large amount of resources would be required to train the system, but once complete the classifier would require very little space or time.
Assuming Atlantis isn't in the database, you could randomly select cities. This also provides a more realistic distribution of points if you intend to mimic human activity:
https://simplemaps.com/data/world-cities
There's only 7,300 cities in the free version.