I want to split the string "004-034556" into two strings by the delimiter "-":
part1 = "004";
part2 = "034556";
That means the first string will contain the characters before '-', and the second string will contain the characters after '-'.
I also want to check if the string has '-' in it.
Use the appropriately named method String#split().
String string = "004-034556";
String[] parts = string.split("-");
String part1 = parts[0]; // 004
String part2 = parts[1]; // 034556
Note that split's argument is assumed to be a regular expression, so remember to escape special characters if necessary.
there are 12 characters with special meanings: the backslash \, the caret ^, the dollar sign $, the period or dot ., the vertical bar or pipe symbol |, the question mark ?, the asterisk or star *, the plus sign +, the opening parenthesis (, the closing parenthesis ), and the opening square bracket [, the opening curly brace {, These special characters are often called "metacharacters".
For instance, to split on a period/dot . (which means "any character" in regex), use either backslash \ to escape the individual special character like so split("\\."), or use character class [] to represent literal character(s) like so split("[.]"), or use Pattern#quote() to escape the entire string like so split(Pattern.quote(".")).
String[] parts = string.split(Pattern.quote(".")); // Split on the exact string.
To test beforehand if the string contains certain character(s), just use String#contains().
if (string.contains("-")) {
// Split it.
} else {
throw new IllegalArgumentException("String " + string + " does not contain -");
}
Note, this does not take a regular expression. For that, use String#matches() instead.
If you'd like to retain the split character in the resulting parts, then make use of positive lookaround. In case you want to have the split character to end up in left hand side, use positive lookbehind by prefixing ?<= group on the pattern.
String string = "004-034556";
String[] parts = string.split("(?<=-)");
String part1 = parts[0]; // 004-
String part2 = parts[1]; // 034556
In case you want to have the split character to end up in right hand side, use positive lookahead by prefixing ?= group on the pattern.
String string = "004-034556";
String[] parts = string.split("(?=-)");
String part1 = parts[0]; // 004
String part2 = parts[1]; // -034556
If you'd like to limit the number of resulting parts, then you can supply the desired number as 2nd argument of split() method.
String string = "004-034556-42";
String[] parts = string.split("-", 2);
String part1 = parts[0]; // 004
String part2 = parts[1]; // 034556-42
An alternative to processing the string directly would be to use a regular expression with capturing groups. This has the advantage that it makes it straightforward to imply more sophisticated constraints on the input. For example, the following splits the string into two parts, and ensures that both consist only of digits:
import java.util.regex.Pattern;
import java.util.regex.Matcher;
class SplitExample
{
private static Pattern twopart = Pattern.compile("(\\d+)-(\\d+)");
public static void checkString(String s)
{
Matcher m = twopart.matcher(s);
if (m.matches()) {
System.out.println(s + " matches; first part is " + m.group(1) +
", second part is " + m.group(2) + ".");
} else {
System.out.println(s + " does not match.");
}
}
public static void main(String[] args) {
checkString("123-4567");
checkString("foo-bar");
checkString("123-");
checkString("-4567");
checkString("123-4567-890");
}
}
As the pattern is fixed in this instance, it can be compiled in advance and stored as a static member (initialised at class load time in the example). The regular expression is:
(\d+)-(\d+)
The parentheses denote the capturing groups; the string that matched that part of the regexp can be accessed by the Match.group() method, as shown. The \d matches and single decimal digit, and the + means "match one or more of the previous expression). The - has no special meaning, so just matches that character in the input. Note that you need to double-escape the backslashes when writing this as a Java string. Some other examples:
([A-Z]+)-([A-Z]+) // Each part consists of only capital letters
([^-]+)-([^-]+) // Each part consists of characters other than -
([A-Z]{2})-(\d+) // The first part is exactly two capital letters,
// the second consists of digits
Use:
String[] result = yourString.split("-");
if (result.length != 2)
throw new IllegalArgumentException("String not in correct format");
This will split your string into two parts. The first element in the array will be the part containing the stuff before the -, and the second element in the array will contain the part of your string after the -.
If the array length is not 2, then the string was not in the format: string-string.
Check out the split() method in the String class.
This:
String[] out = string.split("-");
should do the thing you want. The string class has many method to operate with a string.
// This leaves the regexes issue out of question
// But we must remember that each character in the Delimiter String is treated
// like a single delimiter
public static String[] SplitUsingTokenizer(String subject, String delimiters) {
StringTokenizer strTkn = new StringTokenizer(subject, delimiters);
ArrayList<String> arrLis = new ArrayList<String>(subject.length());
while(strTkn.hasMoreTokens())
arrLis.add(strTkn.nextToken());
return arrLis.toArray(new String[0]);
}
With Java 8:
List<String> stringList = Pattern.compile("-")
.splitAsStream("004-034556")
.collect(Collectors.toList());
stringList.forEach(s -> System.out.println(s));
Use org.apache.commons.lang.StringUtils' split method which can split strings based on the character or string you want to split.
Method signature:
public static String[] split(String str, char separatorChar);
In your case, you want to split a string when there is a "-".
You can simply do as follows:
String str = "004-034556";
String split[] = StringUtils.split(str,"-");
Output:
004
034556
Assume that if - does not exists in your string, it returns the given string, and you will not get any exception.
The requirements left room for interpretation. I recommend writing a method,
public final static String[] mySplit(final String s)
which encapsulate this function. Of course you can use String.split(..) as mentioned in the other answers for the implementation.
You should write some unit-tests for input strings and the desired results and behaviour.
Good test candidates should include:
- "0022-3333"
- "-"
- "5555-"
- "-333"
- "3344-"
- "--"
- ""
- "553535"
- "333-333-33"
- "222--222"
- "222--"
- "--4555"
With defining the according test results, you can specify the behaviour.
For example, if "-333" should return in [,333] or if it is an error.
Can "333-333-33" be separated in [333,333-33] or [333-333,33] or is it an error? And so on.
To summarize: there are at least five ways to split a string in Java:
String.split():
String[] parts ="10,20".split(",");
Pattern.compile(regexp).splitAsStream(input):
List<String> strings = Pattern.compile("\\|")
.splitAsStream("010|020202")
.collect(Collectors.toList());
StringTokenizer (legacy class):
StringTokenizer strings = new StringTokenizer("Welcome to EXPLAINJAVA.COM!", ".");
while(strings.hasMoreTokens()){
String substring = strings.nextToken();
System.out.println(substring);
}
Google Guava Splitter:
Iterable<String> result = Splitter.on(",").split("1,2,3,4");
Apache Commons StringUtils:
String[] strings = StringUtils.split("1,2,3,4", ",");
So you can choose the best option for you depending on what you need, e.g. return type (array, list, or iterable).
Here is a big overview of these methods and the most common examples (how to split by dot, slash, question mark, etc.)
You can try like this also
String concatenated_String="hi^Hello";
String split_string_array[]=concatenated_String.split("\\^");
Assuming, that
you don't really need regular expressions for your split
you happen to already use apache commons lang in your app
The easiest way is to use StringUtils#split(java.lang.String, char). That's more convenient than the one provided by Java out of the box if you don't need regular expressions. Like its manual says, it works like this:
A null input String returns null.
StringUtils.split(null, *) = null
StringUtils.split("", *) = []
StringUtils.split("a.b.c", '.') = ["a", "b", "c"]
StringUtils.split("a..b.c", '.') = ["a", "b", "c"]
StringUtils.split("a:b:c", '.') = ["a:b:c"]
StringUtils.split("a b c", ' ') = ["a", "b", "c"]
I would recommend using commong-lang, since usually it contains a lot of stuff that's usable. However, if you don't need it for anything else than doing a split, then implementing yourself or escaping the regex is a better option.
For simple use cases String.split() should do the job. If you use guava, there is also a Splitter class which allows chaining of different string operations and supports CharMatcher:
Splitter.on('-')
.trimResults()
.omitEmptyStrings()
.split(string);
The fastest way, which also consumes the least resource could be:
String s = "abc-def";
int p = s.indexOf('-');
if (p >= 0) {
String left = s.substring(0, p);
String right = s.substring(p + 1);
} else {
// s does not contain '-'
}
String Split with multiple characters using Regex
public class StringSplitTest {
public static void main(String args[]) {
String s = " ;String; String; String; String, String; String;;String;String; String; String; ;String;String;String;String";
//String[] strs = s.split("[,\\s\\;]");
String[] strs = s.split("[,\\;]");
System.out.println("Substrings length:"+strs.length);
for (int i=0; i < strs.length; i++) {
System.out.println("Str["+i+"]:"+strs[i]);
}
}
}
Output:
Substrings length:17
Str[0]:
Str[1]:String
Str[2]: String
Str[3]: String
Str[4]: String
Str[5]: String
Str[6]: String
Str[7]:
Str[8]:String
Str[9]:String
Str[10]: String
Str[11]: String
Str[12]:
Str[13]:String
Str[14]:String
Str[15]:String
Str[16]:String
But do not expect the same output across all JDK versions. I have seen one bug which exists in some JDK versions where the first null string has been ignored. This bug is not present in the latest JDK version, but it exists in some versions between JDK 1.7 late versions and 1.8 early versions.
There are only two methods you really need to consider.
Use String.split for a one-character delimiter or you don't care about performance
If performance is not an issue, or if the delimiter is a single character that is not a regular expression special character (i.e., not one of .$|()[{^?*+\) then you can use String.split.
String[] results = input.split(",");
The split method has an optimization to avoid using a regular expression if the delimeter is a single character and not in the above list. Otherwise, it has to compile a regular expression, and this is not ideal.
Use Pattern.split and precompile the pattern if using a complex delimiter and you care about performance.
If performance is an issue, and your delimiter is not one of the above, you should pre-compile a regular expression pattern which you can then reuse.
// Save this somewhere
Pattern pattern = Pattern.compile("[,;:]");
/// ... later
String[] results = pattern.split(input);
This last option still creates a new Matcher object. You can also cache this object and reset it for each input for maximum performance, but that is somewhat more complicated and not thread-safe.
You can split a string by a line break by using the following statement:
String textStr[] = yourString.split("\\r?\\n");
You can split a string by a hyphen/character by using the following statement:
String textStr[] = yourString.split("-");
public class SplitTest {
public static String[] split(String text, String delimiter) {
java.util.List<String> parts = new java.util.ArrayList<String>();
text += delimiter;
for (int i = text.indexOf(delimiter), j=0; i != -1;) {
String temp = text.substring(j,i);
if(temp.trim().length() != 0) {
parts.add(temp);
}
j = i + delimiter.length();
i = text.indexOf(delimiter,j);
}
return parts.toArray(new String[0]);
}
public static void main(String[] args) {
String str = "004-034556";
String delimiter = "-";
String result[] = split(str, delimiter);
for(String s:result)
System.out.println(s);
}
}
Please don't use StringTokenizer class as it is a legacy class that is retained for compatibility reasons, and its use is discouraged in new code. And we can make use of the split method as suggested by others as well.
String[] sampleTokens = "004-034556".split("-");
System.out.println(Arrays.toString(sampleTokens));
And as expected it will print:
[004, 034556]
In this answer I also want to point out one change that has taken place for split method in Java 8. The String#split() method makes use of Pattern.split, and now it will remove empty strings at the start of the result array. Notice this change in documentation for Java 8:
When there is a positive-width match at the beginning of the input
sequence then an empty leading substring is included at the beginning
of the resulting array. A zero-width match at the beginning however
never produces such empty leading substring.
It means for the following example:
String[] sampleTokensAgain = "004".split("");
System.out.println(Arrays.toString(sampleTokensAgain));
we will get three strings: [0, 0, 4] and not four as was the case in Java 7 and before. Also check this similar question.
One way to do this is to run through the String in a for-each loop and use the required split character.
public class StringSplitTest {
public static void main(String[] arg){
String str = "004-034556";
String split[] = str.split("-");
System.out.println("The split parts of the String are");
for(String s:split)
System.out.println(s);
}
}
Output:
The split parts of the String are:
004
034556
import java.io.*;
public class BreakString {
public static void main(String args[]) {
String string = "004-034556-1234-2341";
String[] parts = string.split("-");
for(int i=0;i<parts.length;i++) ｛
System.out.println(parts[i]);
}
}
}
You can use Split():
import java.io.*;
public class Splitting
{
public static void main(String args[])
{
String Str = new String("004-034556");
String[] SplittoArray = Str.split("-");
String string1 = SplittoArray[0];
String string2 = SplittoArray[1];
}
}
Else, you can use StringTokenizer:
import java.util.*;
public class Splitting
{
public static void main(String[] args)
{
StringTokenizer Str = new StringTokenizer("004-034556");
String string1 = Str.nextToken("-");
String string2 = Str.nextToken("-");
}
}
Here are two ways two achieve it.
WAY 1: As you have to split two numbers by a special character you can use regex
import java.util.regex.Matcher;
import java.util.regex.Pattern;
public class TrialClass
{
public static void main(String[] args)
{
Pattern p = Pattern.compile("[0-9]+");
Matcher m = p.matcher("004-034556");
while(m.find())
{
System.out.println(m.group());
}
}
}
WAY 2: Using the string split method
public class TrialClass
{
public static void main(String[] args)
{
String temp = "004-034556";
String [] arrString = temp.split("-");
for(String splitString:arrString)
{
System.out.println(splitString);
}
}
}
You can simply use StringTokenizer to split a string in two or more parts whether there are any type of delimiters:
StringTokenizer st = new StringTokenizer("004-034556", "-");
while(st.hasMoreTokens())
{
System.out.println(st.nextToken());
}
Check out the split() method in the String class on javadoc.
https://docs.oracle.com/javase/7/docs/api/java/lang/String.html#split(java.lang.String)
String data = "004-034556-1212-232-232";
int cnt = 1;
for (String item : data.split("-")) {
System.out.println("string "+cnt+" = "+item);
cnt++;
}
Here many examples for split string but I little code optimized.
String str="004-034556"
String[] sTemp=str.split("-");// '-' is a delimiter
string1=004 // sTemp[0];
string2=034556//sTemp[1];
I just wanted to write an algorithm instead of using Java built-in functions:
public static List<String> split(String str, char c){
List<String> list = new ArrayList<>();
StringBuilder sb = new StringBuilder();
for (int i = 0; i < str.length(); i++){
if(str.charAt(i) != c){
sb.append(str.charAt(i));
}
else{
if(sb.length() > 0){
list.add(sb.toString());
sb = new StringBuilder();
}
}
}
if(sb.length() >0){
list.add(sb.toString());
}
return list;
}
You can use the method split:
public class Demo {
public static void main(String args[]) {
String str = "004-034556";
if ((str.contains("-"))) {
String[] temp = str.split("-");
for (String part:temp) {
System.out.println(part);
}
}
else {
System.out.println(str + " does not contain \"-\".");
}
}
}
To split a string, uses String.split(regex). Review the following examples:
String data = "004-034556";
String[] output = data.split("-");
System.out.println(output[0]);
System.out.println(output[1]);
Output
004
034556
Note:
This split (regex) takes a regex as an argument. Remember to escape the regex special characters, like period/dot.
String s = "TnGeneral|DOMESTIC";
String a[]=s.split("\\|");
System.out.println(a.toString());
System.out.println(a[0]);
System.out.println(a[1]);
Output:
TnGeneral
DOMESTIC
String s="004-034556";
for(int i=0;i<s.length();i++)
{
if(s.charAt(i)=='-')
{
System.out.println(s.substring(0,i));
System.out.println(s.substring(i+1));
}
}
As mentioned by everyone, split() is the best option which may be used in your case. An alternative method can be using substring().
I have a question about replacing words. I have some strings, each of which looks like this:
String string = "today is a (happy) day, I would like to (explore) more about Java."
I need to replace the words that have parentheses. I want to replace "(happy)" with "good", and "(explore)" with "learn".
I have some ideas, but I don't know how.
for (int i = 0; i <= string.length(), i++) {
for (int j = 0; j <= string.length(), j++
if ((string.charAt(i)== '(') && (string.charAt(j) == ')')) {
String w1 = line.substring(i+1,j);
string.replace(w1, w2)
}
}
}
My problem is that I can only replace one word with one new word...
I am thinking of using a scanner to prompt me to give a new word and then replace it, how can I do this?
The appendReplacement and appendTail methods of Matcher are designed for this purpose. You can use a regex to scan for your pattern--a pair of parentheses with a word in the middle--then do whatever you need to do to determine the string to replace it with. See the javadoc.
An example, based on the example in the javadoc. I'm assuming you have two methods, replacement(word) that tells what you want to replace the word with (so that replacement("happy") will equal "good" in your example), and hasReplacement(word) that tells whether the word has a replacement or not.
Pattern p = Pattern.compile("\\((.*?)\\)");
Matcher m = p.matcher(source);
StringBuffer sb = new StringBuffer();
while (m.find()) {
String word = m.group(1);
String newWord = hasReplacement(word) ? replacement(word) : m.group(0);
m.appendReplacement(sb, newWord); // appends the replacement, plus any not-yet-used text that comes before the match
}
m.appendTail(sb); // appends any text left over after the last match
String result = sb.toString();
Use below code for replacing the string.
String string = "today is a (happy) day, I would like to (explore) more about Java.";
string = string.replaceAll("\\(happy\\)", "good");
string = string.replaceAll("\\(explore\\)", "learn");
System.out.println(string);`
What you can do is run a loop from 0 to length-1 and if loop encounters a ( then assign its index to a temp1 variable. Now go on further as long as you encounter ).Assign its index to temp2 .Now you can replace that substring using string.replace(string.substring(temp1+1,temp2),"Your desired string")).
No need to use the nested loops. Better use one loop and store the index when you find opening parenthesis and also for close parenthesis and replace it with the word. Continue the same loop and store next index. As you are replacing the words in same string it changes the length of string you need to maintain copy of string and perform loop and replace on different,
Do not use nested for loop. Search for occurrences of ( and ). Get the substring between these two characters and then replace it with the user entered value. Do it till there are not more ( and ) combinations left.
import java.util.Scanner;
public class ReplaceWords {
public static String replaceWords(String s){
while(s.contains(""+"(") && s.contains(""+")")){
Scanner keyboard = new Scanner(System.in);
String toBeReplaced = s.substring(s.indexOf("("), s.indexOf(")")+1);
System.out.println("Enter the word with which you want to replace "+toBeReplaced+" : ");
String replaceWith = keyboard.nextLine();
s = s.replace(toBeReplaced, replaceWith);
}
return s;
}
public static void main(String[] args) {
String myString ="today is a (happy) day, I would like to (explore) more about Java.";
myString = replaceWords(myString);
System.out.println(myString);
}
}
This snippet works for me, just load the HashMap up with replacements and iterate through:
import java.util.*;
public class Test
{
public static void main(String[] args) {
String string = "today is a (happy) day, I would like to (explore) more about Java.";
HashMap<String, String> hm = new HashMap<String, String>();
hm.put("\\(happy\\)", "good");
hm.put("\\(explore\\)", "learn");
for (Map.Entry<String, String> entry : hm.entrySet()) {
String key = entry.getKey();
String value = entry.getValue();
string = string.replaceAll(key, value);
}
System.out.println(string);
}
}
Remember, replaceAll takes a regex, so you want it to display "\(word\)", which means the slashes themselves must be escaped.
How is it possible to traverse through any given sentence word by word? Is there any in-built functions in java? I have no idea how to begin.
Something like this:
String sentence = "Your sentence here.";
String[] words = sentence.split("\\s+"); // splits by whitespace
for (String word : words) {
System.out.println(word);
}
A lot of people are suggesting to split on spaces, but even this very sentence contains commas, etc. You should split on more than just spaces; split on punctuation characters too:
String words = sentence.split("([\\s.,;:\"?!,.…(){}[\\]%#/]|(- )|( -))+");
This regex splits on all reasonably expected punctuation characters. Note that the in-word hyphen and the apostrophe are not "punctuation"; they are part of the word.
This approach, or something similar, will also handle non-English character sentences.
String[] array = input.split(" ");
That way the string is converted into an array separated by spaces (you can change the separator in the split()'s argumen) and then you can loop through the array as you want.
Start with StringTokenizer for example or use String.split(" ")
Try splitting the sentence by whitespace character.
String sentence = "This is a sentence.";
for(String word: sentence.split("\\s+"){
System.out.println(word);
}
String s="sfgasdfg jhsadfkjashfd sajdfhjkasdfh hjskafhasj";
String wordArray[] =s.split("\\s+");
for(String sT :wordArray)
{
System.out.println(st);
}
Take a look at the String Split function here http://www.tek-tips.com/viewthread.cfm?qid=1167964
Assuming you already have the sentence stored as a string, you could use the String.replaceAll("[./,]"," ") method to remove the stop words and then use the String.split("\\s+") to obtain the individual words making up the phrase.
you can use StringTokenizer class which will divide the string into words.
public static void main(String ae[]){
String st = "This is Java";
StringTokenizer str= new StringTokenizer(st);
while(str.hasMoreTokens()){
System.out.println(str.nextToken());
}
}
I would Say StringTokenizer might help You.
String str = "This is String , split by StringTokenizer, created by mkyong";
StringTokenizer st = new StringTokenizer(str);
System.out.println("---- Split by space ------");
while (st.hasMoreElements()) {
System.out.println(st.nextElement());
}
System.out.println("---- Split by comma ',' ------");
StringTokenizer st2 = new StringTokenizer(str, ",");
while (st2.hasMoreElements()) {
System.out.println(st2.nextElement());
}
Also String.split() may help You:
String[] result = "this is a test".split("\\s");
for (int x=0; x<result.length; x++)
System.out.println(result[x]);
OUTPUT:
this
is
a
test
System.out.println(Arrays.toString(
"Many words//separated.by-different\tcharacters"
.split("\\W+")));
//[Many, words, separated, by, different, characters]