The Prepared Statement is a slightly more powerful version of a Statement, and should always be at least as quick and easy to handle as a Statement.
The Prepared Statement may be parametrized
Most relational databases handles a JDBC / SQL query in four steps:
Parse the incoming SQL query
Compile the SQL query
Plan/optimize the data acquisition path
Execute the optimized query / acquire and return data
A Statement will always proceed through the four steps above for each SQL query sent to the database. A Prepared Statement pre-executes steps (1) - (3) in the execution process above. Thus, when creating a Prepared Statement some pre-optimization is performed immediately. The effect is to lessen the load on the database engine at execution time.
Now my question is this:
"Is there any other advantage of using Prepared Statement?"
Advantages of a PreparedStatement:
Precompilation and DB-side caching of the SQL statement leads to overall faster execution and the ability to reuse the same SQL statement in batches.
Automatic prevention of SQL injection attacks by builtin escaping of quotes and other special characters. Note that this requires that you use any of the PreparedStatement setXxx() methods to set the values
preparedStatement = connection.prepareStatement("INSERT INTO Person (name, email, birthdate, photo) VALUES (?, ?, ?, ?)");
preparedStatement.setString(1, person.getName());
preparedStatement.setString(2, person.getEmail());
preparedStatement.setTimestamp(3, new Timestamp(person.getBirthdate().getTime()));
preparedStatement.setBinaryStream(4, person.getPhoto());
preparedStatement.executeUpdate();
and thus don't inline the values in the SQL string by string-concatenating.
preparedStatement = connection.prepareStatement("INSERT INTO Person (name, email) VALUES ('" + person.getName() + "', '" + person.getEmail() + "'");
preparedStatement.executeUpdate();
Eases setting of non-standard Java objects in a SQL string, e.g. Date, Time, Timestamp, BigDecimal, InputStream (Blob) and Reader (Clob). On most of those types you can't "just" do a toString() as you would do in a simple Statement. You could even refactor it all to using PreparedStatement#setObject() inside a loop as demonstrated in the utility method below:
public static void setValues(PreparedStatement preparedStatement, Object... values) throws SQLException {
for (int i = 0; i < values.length; i++) {
preparedStatement.setObject(i + 1, values[i]);
}
}
Which can be used as below:
preparedStatement = connection.prepareStatement("INSERT INTO Person (name, email, birthdate, photo) VALUES (?, ?, ?, ?)");
setValues(preparedStatement, person.getName(), person.getEmail(), new Timestamp(person.getBirthdate().getTime()), person.getPhoto());
preparedStatement.executeUpdate();
They are pre-compiled (once), so faster for repeated execution of dynamic SQL (where parameters change)
Database statement caching boosts DB execution performance
Databases store caches of execution plans for previously executed statements. This allows the database engine to reuse the plans for statements that have been executed previously. Because PreparedStatement uses parameters, each time it is executed it appears as the same SQL, the database can reuse the previous access plan, reducing processing. Statements "inline" the parameters into the SQL string and so do not appear as the same SQL to the DB, preventing cache usage.
Binary communications protocol means less bandwidth and faster comms calls to DB server
Prepared statements are normally executed through a non-SQL binary protocol. This means that there is less data in the packets, so communications to the server is faster. As a rule of thumb network operations are an order of magnitude slower than disk operations which are an order of magnitude slower than in-memory CPU operations. Hence, any reduction in amount of data sent over the network will have a good effect on overall performance.
They protect against SQL injection, by escaping text for all the parameter values provided.
They provide stronger separation between the query code and the parameter values (compared to concatenated SQL strings), boosting readability and helping code maintainers quickly understand inputs and outputs of the query.
In java, can call getMetadata() and getParameterMetadata() to reflect on the result set fields and the parameter fields, respectively
In java, intelligently accepts java objects as parameter types via setObject, setBoolean, setByte, setDate, setDouble, setDouble, setFloat, setInt, setLong, setShort, setTime, setTimestamp - it converts into JDBC type format that is comprehendible to DB (not just toString() format).
In java, accepts SQL ARRAYs, as parameter type via setArray method
In java, accepts CLOBs, BLOBs, OutputStreams and Readers as parameter "feeds" via setClob/setNClob, setBlob, setBinaryStream, setCharacterStream/setAsciiStream/setNCharacterStream methods, respectively
In java, allows DB-specific values to be set for SQL DATALINK, SQL ROWID, SQL XML, and NULL via setURL, setRowId, setSQLXML ans setNull methods
In java, inherits all methods from Statement. It inherits the addBatch method, and additionally allows a set of parameter values to be added to match the set of batched SQL commands via addBatch method.
In java, a special type of PreparedStatement (the subclass CallableStatement) allows stored procedures to be executed - supporting high performance, encapsulation, procedural programming and SQL, DB administration/maintenance/tweaking of logic, and use of proprietary DB logic & features
PreparedStatement is a very good defense (but not foolproof) in preventing SQL injection attacks. Binding parameter values is a good way to guarding against "little Bobby Tables" making an unwanted visit.
Some of the benefits of PreparedStatement over Statement are:
PreparedStatement helps us in preventing SQL injection attacks because it automatically escapes the special characters.
PreparedStatement allows us to execute dynamic queries with parameter inputs.
PreparedStatement provides different types of setter methods to set the input parameters for the query.
PreparedStatement is faster than Statement. It becomes more visible when we reuse the PreparedStatement or use it’s batch processing methods for executing multiple queries.
PreparedStatement helps us in writing object Oriented code with setter methods whereas with Statement we have to use String Concatenation to create the query. If there are multiple parameters to set, writing Query using String concatenation looks very ugly and error prone.
Read more about SQL injection issue at http://www.journaldev.com/2489/jdbc-statement-vs-preparedstatement-sql-injection-example
nothing much to add,
1 - if you want to execute a query in a loop (more than 1 time), prepared statement can be faster, because of optimization that you mentioned.
2 - parameterized query is a good way to avoid SQL Injection. Parameterized querys are only available in PreparedStatement.
Statement is static and prepared statement is dynamic.
Statement is suitable for DDL and prepared statment for DML.
Statement is slower while prepared statement is faster.
more differences (archived)
Can't do CLOBs in a Statement.
And: (OraclePreparedStatement) ps
As Quoted by mattjames
The use of a Statement in JDBC should be 100% localized to being used
for DDL (ALTER, CREATE, GRANT, etc) as these are the only statement
types that cannot accept BIND VARIABLES. PreparedStatements or
CallableStatements should be used for EVERY OTHER type of statement
(DML, Queries). As these are the statement types that accept bind
variables.
This is a fact, a rule, a law -- use prepared statements EVERYWHERE.
Use STATEMENTS almost no where.
Statement will be used for executing static SQL statements and it can't accept input parameters.
PreparedStatement will be used for executing SQL statements many times dynamically. It will accept input parameters.
sql injection is ignored by prepared statement so security is increase in prepared statement
It's easier to read
You can easily make the query string a constant
Statement interface executes static SQL statements without parameters
PreparedStatement interface (extending Statement) executes a precompiled SQL statement with/without parameters
Efficient for repeated executions
It is precompiled so it's faster
Another characteristic of Prepared or Parameterized Query: Reference taken from this article.
This statement is one of features of the database system in which same SQL statement executes repeatedly with high efficiency. The prepared statements are one kind of the Template and used by application with different parameters.
The statement template is prepared and sent to the database system and database system perform parsing, compiling and optimization on this template and store without executing it.
Some of parameter like, where clause is not passed during template creation later application, send these parameters to the database system and database system use template of SQL Statement and executes as per request.
Prepared statements are very useful against SQL Injection because the application can prepare parameter using different techniques and protocols.
When the number of data is increasing and indexes are changing frequently at that time Prepared Statements might be fail because in this situation require a new query plan.
Dont get confusion : simply remember
Statement is used for static queries like DDLs i.e. create,drop,alter and prepareStatement is used for dynamic queries i.e. DML query.
In Statement, the query is not precompiled while in prepareStatement query is precompiled, because of this prepareStatement is time efficient.
prepareStatement takes argument at the time of creation while Statement does not take arguments.
For Example if you want to create table and insert element then ::
Create table (static) by using Statement and Insert element (dynamic)by using prepareStatement.
I followed all the answers of this question to change a working legacy code using - Statement ( but having SQL Injections ) to a solution using PreparedStatement with a much slower code because of poor understanding of semantics around Statement.addBatch(String sql) & PreparedStatement.addBatch().
So I am listing my scenario here so others don't make same mistake.
My scenario was
Statement statement = connection.createStatement();
for (Object object : objectList) {
//Create a query which would be different for each object
// Add this query to statement for batch using - statement.addBatch(query);
}
statement.executeBatch();
So in above code , I had thousands of different queries, all added to same statement and this code worked faster because statements not being cached was good & this code executed rarely in the app.
Now to fix SQL Injections, I changed this code to ,
List<PreparedStatement> pStatements = new ArrayList<>();
for (Object object : objectList) {
//Create a query which would be different for each object
PreparedStatement pStatement =connection.prepareStatement(query);
// This query can't be added to batch because its a different query so I used list.
//Set parameter to pStatement using object
pStatements.add(pStatement);
}// Object loop
// In place of statement.executeBatch(); , I had to loop around the list & execute each update separately
for (PreparedStatement ps : pStatements) {
ps.executeUpdate();
}
So you see, I started creating thousands of PreparedStatement objects & then eventually not able to utilize batching because my scenario demanded that - there are thousands of UPDATE or INSERT queries & all of these queries happen to be different.
Fixing SQL injection was mandatory at no cost of performance degradation and I don't think that it is possible with PreparedStatement in this scenario.
Also, when you use inbuilt batching facility, you have to worry about closing only one Statement but with this List approach, you need to close statement before reuse , Reusing a PreparedStatement
I am using odbc to connect mysql database in Java
I write a function "ExecuteQuery", it takes a string parameter as sql statement and returns its resultset. However, when should I close the statement object?
If I close it in function ExecuteQuery, the returned resultset will be closed as well.
If I don't close it, memory leak occurs as I do not have the reference of statement object in caller. Thank you
You're taking wrong approach. If you really need such function (which is doubtful), make it accept a Statement as a parameter and make a separate function to create and set up that statement. Then you may wrap your function and ResultSet work in a try..finally block and close the statement in finally.
E.g.
Statement statement = getStatement();
try {
ResultSet rs = executeQuery(statement, query);
...
} finally {
statement.close();
}
However, if you're facing such problems, you may want to re-consider your architecture. Take a look at Hibernate, for example.
I can successfully connect to an oracle database and print out the list of all table names using the getAllTableNames() method.
My next Idea is to filter specific tables and display all of their columns.
I am running this query at the moment (I am including the entire method.)
static void getLengths(){
String query = "SELECT column_name from user_tab_columns where table_name = '<MytableName>'"
try{
ResultSet rs = db.runQuery(query);
System.out.println(rs):
} catch (Exception ex) {
System.out.println(ex);
//Seems to be successful
}
} //End of Method
In the System.out Window I am receiving this which makes me think I just need to view my result set somehow?
oracle.jdbc.driver.DcrollableResultSet#(different number everytime I run code)
Is my result set hiding somewhere? What is the best way to go about viewing it?
System.out.println(rs) just prints out the class name and handle of the ResultSet object. This is pretty useless.
You need to loop through the result set and read the appropriate fields. Generally you write something like:
ResultSet rs=db.runQuery(query) // I don't know where this function is coming from, but okay
while (rs.next())
{
String myColumn=rs.getString("column_name");
System.out.println(myColumn);
}
rs.close();
You might want to read up on JDBC in general, and look at the Java Docs for Connection, Statement, and ResultSet.
You have to iterate over your ResultSet to get the values.
Do something like that
while(rs.next()) {System.out.println(rs.getString("COLUMN_NAME"));}
ResultSet javadoc states
A table of data representing a database result set, which is usually generated by executing a statement that queries the database.
So, you'll have to use the appropriate getXXX(int index) methods where XXX is your equivalent Java Datatype. And don't forget to invoke next() before doing anything else!
Read Retrieving and Modifying Values from Result Sets to see an example of what you're trying to accomplish.
You will need to step through the result set, very rusty on my java, but you can probably call "toString()" on the resultset to at least show you what was returned although its not going to be very usable.
System.out.println(rs.toString())
Is recommended to create just one Statement object and execute multiple executeUpdate() on it?
// Vantages/drawbacks of this solution?
conn.setAutocommit(false);
Statement stmt = conn.createStatement();
stmt.executeUpdate('[ANY_INSERT_SQL]');
stmt.executeUpdate('[ANY_INSERT_SQL]');
stmt.executeUpdate('[ANY_INSERT_SQL]');
conn.commit();
Or is better one Statement object for each executeUpdate:
// Vantages/drawbacks of this solution?
conn.setAutocommit(false);
Statement stmt1 = conn.createStatement();
stmt1.executeUpdate('[ANY_INSERT_SQL]');
Statement stmt2 = conn.createStatement();
stmt2.executeUpdate('[ANY_INSERT_SQL]');
Statement stmt3 = conn.createStatement();
stmt3.executeUpdate('[ANY_INSERT_SQL]');
conn.commit();
Thanks in advance.
PS: I know PreparedStatement class and I use it often, but my doubt is about Statement usage.
It doesn't matter, just make sure you close all statement objects.
Based on the javadoc, A statement can have only one associated ResultSet object.
The object used for executing a static
SQL statement and returning the
results it produces.
By default, only one ResultSet object
per Statement object can be open at
the same time. Therefore, if the
reading of one ResultSet object is
interleaved with the reading of
another, each must have been generated
by different Statement objects. All
execution methods in the Statement
interface implicitly close a
statment's current ResultSet object if
an open one exists.
http://download.oracle.com/javase/1.4.2/docs/api/java/sql/Statement.html
If you need to process multiple results sets at the same time, perhaps, more statements make sense.
Probably more often than not, you only need to use one.
Performance-wise, probably better as it keeps fewer resources active.