Related
I have a file name with this format yy_MM_someRandomString_originalFileName.
example:
02_01_fEa3129E_my Pic.png
I want replace the first 2 underscores with / so that the example becomes:
02/01/fEa3129E_my Pic.png
That can be done with replaceAll, but the problem is that files may contain underscores as well.
#Test
void test() {
final var input = "02_01_fEa3129E_my Pic.png";
final var formatted = replaceNMatches(input, "_", "/", 2);
assertEquals("02/01/fEa3129E_my Pic.png", formatted);
}
private String replaceNMatches(String input, String regex,
String replacement, int numberOfTimes) {
for (int i = 0; i < numberOfTimes; i++) {
input = input.replaceFirst(regex, replacement);
}
return input;
}
I solved this using a loop, but is there a pure regex way to do this?
EDIT: this way should be able to let me change a parameter and increase the amount of underscores from 2 to n.
You could use 2 capturing groups and use those in the replacement where the match of the _ will be replaced by /
^([^_]+)_([^_]+)_
Replace with:
$1/$2/
Regex demo | Java demo
For example:
String regex = "^([^_]+)_([^_]+)_";
String string = "02_01_fEa3129E_my Pic.png";
String subst = "$1/$2/";
Pattern pattern = Pattern.compile(regex);
Matcher matcher = pattern.matcher(string);
String result = matcher.replaceFirst(subst);
System.out.println(result);
Result
02/01/fEa3129E_my Pic.png
Your current solution has few problems:
It is inefficient - because each replaceFirst need to start from beginning of string so it needs to iterate over same starting characters many times.
It has a bug - because of point 1. while iterating from beginning instead of last modified place, we can replace value which was inserted previously.
For instance if we want to replace single character two times, each with X like abc -> XXc after code like
String input = "abc";
input = input.replaceFirst(".", "X"); // replaces a with X -> Xbc
input = input.replaceFirst(".", "X"); // replaces X with X -> Xbc
we will end up with Xbc instead of XXc because second replaceFirst will replace X with X instead of b with X.
To avoid that kind of problems you can rewrite your code to use Matcher#appendReplacement and Matcher#appendTail methods which ensures that we will iterate over input once and can replace each matched part with value we want
private static String replaceNMatches(String input, String regex,
String replacement, int numberOfTimes) {
Matcher m = Pattern.compile(regex).matcher(input);
StringBuilder sb = new StringBuilder();
int i = 0;
while(i++ < numberOfTimes && m.find() ){
m.appendReplacement(sb, replacement); // replaces currently matched part with replacement,
// and writes replaced version to StringBuilder
// along with text before the match
}
m.appendTail(sb); //lets add to builder text after last match
return sb.toString();
}
Usage example:
System.out.println(replaceNMatches("abcdefgh", "[efgh]", "X", 2)); //abcdXXgh
I have a multiline string which is delimited by a set of different delimiters:
(Text1)(DelimiterA)(Text2)(DelimiterC)(Text3)(DelimiterB)(Text4)
I can split this string into its parts, using String.split, but it seems that I can't get the actual string, which matched the delimiter regex.
In other words, this is what I get:
Text1
Text2
Text3
Text4
This is what I want
Text1
DelimiterA
Text2
DelimiterC
Text3
DelimiterB
Text4
Is there any JDK way to split the string using a delimiter regex but also keep the delimiters?
You can use lookahead and lookbehind, which are features of regular expressions.
System.out.println(Arrays.toString("a;b;c;d".split("(?<=;)")));
System.out.println(Arrays.toString("a;b;c;d".split("(?=;)")));
System.out.println(Arrays.toString("a;b;c;d".split("((?<=;)|(?=;))")));
And you will get:
[a;, b;, c;, d]
[a, ;b, ;c, ;d]
[a, ;, b, ;, c, ;, d]
The last one is what you want.
((?<=;)|(?=;)) equals to select an empty character before ; or after ;.
EDIT: Fabian Steeg's comments on readability is valid. Readability is always a problem with regular expressions. One thing I do to make regular expressions more readable is to create a variable, the name of which represents what the regular expression does. You can even put placeholders (e.g. %1$s) and use Java's String.format to replace the placeholders with the actual string you need to use; for example:
static public final String WITH_DELIMITER = "((?<=%1$s)|(?=%1$s))";
public void someMethod() {
final String[] aEach = "a;b;c;d".split(String.format(WITH_DELIMITER, ";"));
...
}
You want to use lookarounds, and split on zero-width matches. Here are some examples:
public class SplitNDump {
static void dump(String[] arr) {
for (String s : arr) {
System.out.format("[%s]", s);
}
System.out.println();
}
public static void main(String[] args) {
dump("1,234,567,890".split(","));
// "[1][234][567][890]"
dump("1,234,567,890".split("(?=,)"));
// "[1][,234][,567][,890]"
dump("1,234,567,890".split("(?<=,)"));
// "[1,][234,][567,][890]"
dump("1,234,567,890".split("(?<=,)|(?=,)"));
// "[1][,][234][,][567][,][890]"
dump(":a:bb::c:".split("(?=:)|(?<=:)"));
// "[][:][a][:][bb][:][:][c][:]"
dump(":a:bb::c:".split("(?=(?!^):)|(?<=:)"));
// "[:][a][:][bb][:][:][c][:]"
dump(":::a::::b b::c:".split("(?=(?!^):)(?<!:)|(?!:)(?<=:)"));
// "[:::][a][::::][b b][::][c][:]"
dump("a,bb:::c d..e".split("(?!^)\\b"));
// "[a][,][bb][:::][c][ ][d][..][e]"
dump("ArrayIndexOutOfBoundsException".split("(?<=[a-z])(?=[A-Z])"));
// "[Array][Index][Out][Of][Bounds][Exception]"
dump("1234567890".split("(?<=\\G.{4})"));
// "[1234][5678][90]"
// Split at the end of each run of letter
dump("Boooyaaaah! Yippieeee!!".split("(?<=(?=(.)\\1(?!\\1))..)"));
// "[Booo][yaaaa][h! Yipp][ieeee][!!]"
}
}
And yes, that is triply-nested assertion there in the last pattern.
Related questions
Java split is eating my characters.
Can you use zero-width matching regex in String split?
How do I convert CamelCase into human-readable names in Java?
Backreferences in lookbehind
See also
regular-expressions.info/Lookarounds
A very naive solution, that doesn't involve regex would be to perform a string replace on your delimiter along the lines of (assuming comma for delimiter):
string.replace(FullString, "," , "~,~")
Where you can replace tilda (~) with an appropriate unique delimiter.
Then if you do a split on your new delimiter then i believe you will get the desired result.
import java.util.regex.*;
import java.util.LinkedList;
public class Splitter {
private static final Pattern DEFAULT_PATTERN = Pattern.compile("\\s+");
private Pattern pattern;
private boolean keep_delimiters;
public Splitter(Pattern pattern, boolean keep_delimiters) {
this.pattern = pattern;
this.keep_delimiters = keep_delimiters;
}
public Splitter(String pattern, boolean keep_delimiters) {
this(Pattern.compile(pattern==null?"":pattern), keep_delimiters);
}
public Splitter(Pattern pattern) { this(pattern, true); }
public Splitter(String pattern) { this(pattern, true); }
public Splitter(boolean keep_delimiters) { this(DEFAULT_PATTERN, keep_delimiters); }
public Splitter() { this(DEFAULT_PATTERN); }
public String[] split(String text) {
if (text == null) {
text = "";
}
int last_match = 0;
LinkedList<String> splitted = new LinkedList<String>();
Matcher m = this.pattern.matcher(text);
while (m.find()) {
splitted.add(text.substring(last_match,m.start()));
if (this.keep_delimiters) {
splitted.add(m.group());
}
last_match = m.end();
}
splitted.add(text.substring(last_match));
return splitted.toArray(new String[splitted.size()]);
}
public static void main(String[] argv) {
if (argv.length != 2) {
System.err.println("Syntax: java Splitter <pattern> <text>");
return;
}
Pattern pattern = null;
try {
pattern = Pattern.compile(argv[0]);
}
catch (PatternSyntaxException e) {
System.err.println(e);
return;
}
Splitter splitter = new Splitter(pattern);
String text = argv[1];
int counter = 1;
for (String part : splitter.split(text)) {
System.out.printf("Part %d: \"%s\"\n", counter++, part);
}
}
}
/*
Example:
> java Splitter "\W+" "Hello World!"
Part 1: "Hello"
Part 2: " "
Part 3: "World"
Part 4: "!"
Part 5: ""
*/
I don't really like the other way, where you get an empty element in front and back. A delimiter is usually not at the beginning or at the end of the string, thus you most often end up wasting two good array slots.
Edit: Fixed limit cases. Commented source with test cases can be found here: http://snippets.dzone.com/posts/show/6453
Pass the 3rd aurgument as "true". It will return delimiters as well.
StringTokenizer(String str, String delimiters, true);
I know this is a very-very old question and answer has also been accepted. But still I would like to submit a very simple answer to original question. Consider this code:
String str = "Hello-World:How\nAre You&doing";
inputs = str.split("(?!^)\\b");
for (int i=0; i<inputs.length; i++) {
System.out.println("a[" + i + "] = \"" + inputs[i] + '"');
}
OUTPUT:
a[0] = "Hello"
a[1] = "-"
a[2] = "World"
a[3] = ":"
a[4] = "How"
a[5] = "
"
a[6] = "Are"
a[7] = " "
a[8] = "You"
a[9] = "&"
a[10] = "doing"
I am just using word boundary \b to delimit the words except when it is start of text.
I got here late, but returning to the original question, why not just use lookarounds?
Pattern p = Pattern.compile("(?<=\\w)(?=\\W)|(?<=\\W)(?=\\w)");
System.out.println(Arrays.toString(p.split("'ab','cd','eg'")));
System.out.println(Arrays.toString(p.split("boo:and:foo")));
output:
[', ab, ',', cd, ',', eg, ']
[boo, :, and, :, foo]
EDIT: What you see above is what appears on the command line when I run that code, but I now see that it's a bit confusing. It's difficult to keep track of which commas are part of the result and which were added by Arrays.toString(). SO's syntax highlighting isn't helping either. In hopes of getting the highlighting to work with me instead of against me, here's how those arrays would look it I were declaring them in source code:
{ "'", "ab", "','", "cd", "','", "eg", "'" }
{ "boo", ":", "and", ":", "foo" }
I hope that's easier to read. Thanks for the heads-up, #finnw.
I had a look at the above answers and honestly none of them I find satisfactory. What you want to do is essentially mimic the Perl split functionality. Why Java doesn't allow this and have a join() method somewhere is beyond me but I digress. You don't even need a class for this really. Its just a function. Run this sample program:
Some of the earlier answers have excessive null-checking, which I recently wrote a response to a question here:
https://stackoverflow.com/users/18393/cletus
Anyway, the code:
public class Split {
public static List<String> split(String s, String pattern) {
assert s != null;
assert pattern != null;
return split(s, Pattern.compile(pattern));
}
public static List<String> split(String s, Pattern pattern) {
assert s != null;
assert pattern != null;
Matcher m = pattern.matcher(s);
List<String> ret = new ArrayList<String>();
int start = 0;
while (m.find()) {
ret.add(s.substring(start, m.start()));
ret.add(m.group());
start = m.end();
}
ret.add(start >= s.length() ? "" : s.substring(start));
return ret;
}
private static void testSplit(String s, String pattern) {
System.out.printf("Splitting '%s' with pattern '%s'%n", s, pattern);
List<String> tokens = split(s, pattern);
System.out.printf("Found %d matches%n", tokens.size());
int i = 0;
for (String token : tokens) {
System.out.printf(" %d/%d: '%s'%n", ++i, tokens.size(), token);
}
System.out.println();
}
public static void main(String args[]) {
testSplit("abcdefghij", "z"); // "abcdefghij"
testSplit("abcdefghij", "f"); // "abcde", "f", "ghi"
testSplit("abcdefghij", "j"); // "abcdefghi", "j", ""
testSplit("abcdefghij", "a"); // "", "a", "bcdefghij"
testSplit("abcdefghij", "[bdfh]"); // "a", "b", "c", "d", "e", "f", "g", "h", "ij"
}
}
I like the idea of StringTokenizer because it is Enumerable.
But it is also obsolete, and replace by String.split which return a boring String[] (and does not includes the delimiters).
So I implemented a StringTokenizerEx which is an Iterable, and which takes a true regexp to split a string.
A true regexp means it is not a 'Character sequence' repeated to form the delimiter:
'o' will only match 'o', and split 'ooo' into three delimiter, with two empty string inside:
[o], '', [o], '', [o]
But the regexp o+ will return the expected result when splitting "aooob"
[], 'a', [ooo], 'b', []
To use this StringTokenizerEx:
final StringTokenizerEx aStringTokenizerEx = new StringTokenizerEx("boo:and:foo", "o+");
final String firstDelimiter = aStringTokenizerEx.getDelimiter();
for(String aString: aStringTokenizerEx )
{
// uses the split String detected and memorized in 'aString'
final nextDelimiter = aStringTokenizerEx.getDelimiter();
}
The code of this class is available at DZone Snippets.
As usual for a code-challenge response (one self-contained class with test cases included), copy-paste it (in a 'src/test' directory) and run it. Its main() method illustrates the different usages.
Note: (late 2009 edit)
The article Final Thoughts: Java Puzzler: Splitting Hairs does a good work explaning the bizarre behavior in String.split().
Josh Bloch even commented in response to that article:
Yes, this is a pain. FWIW, it was done for a very good reason: compatibility with Perl.
The guy who did it is Mike "madbot" McCloskey, who now works with us at Google. Mike made sure that Java's regular expressions passed virtually every one of the 30K Perl regular expression tests (and ran faster).
The Google common-library Guava contains also a Splitter which is:
simpler to use
maintained by Google (and not by you)
So it may worth being checked out. From their initial rough documentation (pdf):
JDK has this:
String[] pieces = "foo.bar".split("\\.");
It's fine to use this if you want exactly what it does:
- regular expression
- result as an array
- its way of handling empty pieces
Mini-puzzler: ",a,,b,".split(",") returns...
(a) "", "a", "", "b", ""
(b) null, "a", null, "b", null
(c) "a", null, "b"
(d) "a", "b"
(e) None of the above
Answer: (e) None of the above.
",a,,b,".split(",")
returns
"", "a", "", "b"
Only trailing empties are skipped! (Who knows the workaround to prevent the skipping? It's a fun one...)
In any case, our Splitter is simply more flexible: The default behavior is simplistic:
Splitter.on(',').split(" foo, ,bar, quux,")
--> [" foo", " ", "bar", " quux", ""]
If you want extra features, ask for them!
Splitter.on(',')
.trimResults()
.omitEmptyStrings()
.split(" foo, ,bar, quux,")
--> ["foo", "bar", "quux"]
Order of config methods doesn't matter -- during splitting, trimming happens before checking for empties.
Here is a simple clean implementation which is consistent with Pattern#split and works with variable length patterns, which look behind cannot support, and it is easier to use. It is similar to the solution provided by #cletus.
public static String[] split(CharSequence input, String pattern) {
return split(input, Pattern.compile(pattern));
}
public static String[] split(CharSequence input, Pattern pattern) {
Matcher matcher = pattern.matcher(input);
int start = 0;
List<String> result = new ArrayList<>();
while (matcher.find()) {
result.add(input.subSequence(start, matcher.start()).toString());
result.add(matcher.group());
start = matcher.end();
}
if (start != input.length()) result.add(input.subSequence(start, input.length()).toString());
return result.toArray(new String[0]);
}
I don't do null checks here, Pattern#split doesn't, why should I. I don't like the if at the end but it is required for consistency with the Pattern#split . Otherwise I would unconditionally append, resulting in an empty string as the last element of the result if the input string ends with the pattern.
I convert to String[] for consistency with Pattern#split, I use new String[0] rather than new String[result.size()], see here for why.
Here are my tests:
#Test
public void splitsVariableLengthPattern() {
String[] result = Split.split("/foo/$bar/bas", "\\$\\w+");
Assert.assertArrayEquals(new String[] { "/foo/", "$bar", "/bas" }, result);
}
#Test
public void splitsEndingWithPattern() {
String[] result = Split.split("/foo/$bar", "\\$\\w+");
Assert.assertArrayEquals(new String[] { "/foo/", "$bar" }, result);
}
#Test
public void splitsStartingWithPattern() {
String[] result = Split.split("$foo/bar", "\\$\\w+");
Assert.assertArrayEquals(new String[] { "", "$foo", "/bar" }, result);
}
#Test
public void splitsNoMatchesPattern() {
String[] result = Split.split("/foo/bar", "\\$\\w+");
Assert.assertArrayEquals(new String[] { "/foo/bar" }, result);
}
I will post my working versions also(first is really similar to Markus).
public static String[] splitIncludeDelimeter(String regex, String text){
List<String> list = new LinkedList<>();
Matcher matcher = Pattern.compile(regex).matcher(text);
int now, old = 0;
while(matcher.find()){
now = matcher.end();
list.add(text.substring(old, now));
old = now;
}
if(list.size() == 0)
return new String[]{text};
//adding rest of a text as last element
String finalElement = text.substring(old);
list.add(finalElement);
return list.toArray(new String[list.size()]);
}
And here is second solution and its round 50% faster than first one:
public static String[] splitIncludeDelimeter2(String regex, String text){
List<String> list = new LinkedList<>();
Matcher matcher = Pattern.compile(regex).matcher(text);
StringBuffer stringBuffer = new StringBuffer();
while(matcher.find()){
matcher.appendReplacement(stringBuffer, matcher.group());
list.add(stringBuffer.toString());
stringBuffer.setLength(0); //clear buffer
}
matcher.appendTail(stringBuffer); ///dodajemy reszte ciagu
list.add(stringBuffer.toString());
return list.toArray(new String[list.size()]);
}
Another candidate solution using a regex. Retains token order, correctly matches multiple tokens of the same type in a row. The downside is that the regex is kind of nasty.
package javaapplication2;
import java.util.ArrayList;
import java.util.List;
import java.util.regex.Matcher;
import java.util.regex.Pattern;
public class JavaApplication2 {
/**
* #param args the command line arguments
*/
public static void main(String[] args) {
String num = "58.5+variable-+98*78/96+a/78.7-3443*12-3";
// Terrifying regex:
// (a)|(b)|(c) match a or b or c
// where
// (a) is one or more digits optionally followed by a decimal point
// followed by one or more digits: (\d+(\.\d+)?)
// (b) is one of the set + * / - occurring once: ([+*/-])
// (c) is a sequence of one or more lowercase latin letter: ([a-z]+)
Pattern tokenPattern = Pattern.compile("(\\d+(\\.\\d+)?)|([+*/-])|([a-z]+)");
Matcher tokenMatcher = tokenPattern.matcher(num);
List<String> tokens = new ArrayList<>();
while (!tokenMatcher.hitEnd()) {
if (tokenMatcher.find()) {
tokens.add(tokenMatcher.group());
} else {
// report error
break;
}
}
System.out.println(tokens);
}
}
Sample output:
[58.5, +, variable, -, +, 98, *, 78, /, 96, +, a, /, 78.7, -, 3443, *, 12, -, 3]
I don't know of an existing function in the Java API that does this (which is not to say it doesn't exist), but here's my own implementation (one or more delimiters will be returned as a single token; if you want each delimiter to be returned as a separate token, it will need a bit of adaptation):
static String[] splitWithDelimiters(String s) {
if (s == null || s.length() == 0) {
return new String[0];
}
LinkedList<String> result = new LinkedList<String>();
StringBuilder sb = null;
boolean wasLetterOrDigit = !Character.isLetterOrDigit(s.charAt(0));
for (char c : s.toCharArray()) {
if (Character.isLetterOrDigit(c) ^ wasLetterOrDigit) {
if (sb != null) {
result.add(sb.toString());
}
sb = new StringBuilder();
wasLetterOrDigit = !wasLetterOrDigit;
}
sb.append(c);
}
result.add(sb.toString());
return result.toArray(new String[0]);
}
I suggest using Pattern and Matcher, which will almost certainly achieve what you want. Your regular expression will need to be somewhat more complicated than what you are using in String.split.
I don't think it is possible with String#split, but you can use a StringTokenizer, though that won't allow you to define your delimiter as a regex, but only as a class of single-digit characters:
new StringTokenizer("Hello, world. Hi!", ",.!", true); // true for returnDelims
If you can afford, use Java's replace(CharSequence target, CharSequence replacement) method and fill in another delimiter to split with.
Example:
I want to split the string "boo:and:foo" and keep ':' at its righthand String.
String str = "boo:and:foo";
str = str.replace(":","newdelimiter:");
String[] tokens = str.split("newdelimiter");
Important note: This only works if you have no further "newdelimiter" in your String! Thus, it is not a general solution.
But if you know a CharSequence of which you can be sure that it will never appear in the String, this is a very simple solution.
Fast answer: use non physical bounds like \b to split. I will try and experiment to see if it works (used that in PHP and JS).
It is possible, and kind of work, but might split too much. Actually, it depends on the string you want to split and the result you need. Give more details, we will help you better.
Another way is to do your own split, capturing the delimiter (supposing it is variable) and adding it afterward to the result.
My quick test:
String str = "'ab','cd','eg'";
String[] stra = str.split("\\b");
for (String s : stra) System.out.print(s + "|");
System.out.println();
Result:
'|ab|','|cd|','|eg|'|
A bit too much... :-)
Tweaked Pattern.split() to include matched pattern to the list
Added
// add match to the list
matchList.add(input.subSequence(start, end).toString());
Full source
public static String[] inclusiveSplit(String input, String re, int limit) {
int index = 0;
boolean matchLimited = limit > 0;
ArrayList<String> matchList = new ArrayList<String>();
Pattern pattern = Pattern.compile(re);
Matcher m = pattern.matcher(input);
// Add segments before each match found
while (m.find()) {
int end = m.end();
if (!matchLimited || matchList.size() < limit - 1) {
int start = m.start();
String match = input.subSequence(index, start).toString();
matchList.add(match);
// add match to the list
matchList.add(input.subSequence(start, end).toString());
index = end;
} else if (matchList.size() == limit - 1) { // last one
String match = input.subSequence(index, input.length())
.toString();
matchList.add(match);
index = end;
}
}
// If no match was found, return this
if (index == 0)
return new String[] { input.toString() };
// Add remaining segment
if (!matchLimited || matchList.size() < limit)
matchList.add(input.subSequence(index, input.length()).toString());
// Construct result
int resultSize = matchList.size();
if (limit == 0)
while (resultSize > 0 && matchList.get(resultSize - 1).equals(""))
resultSize--;
String[] result = new String[resultSize];
return matchList.subList(0, resultSize).toArray(result);
}
Here's a groovy version based on some of the code above, in case it helps. It's short, anyway. Conditionally includes the head and tail (if they are not empty). The last part is a demo/test case.
List splitWithTokens(str, pat) {
def tokens=[]
def lastMatch=0
def m = str=~pat
while (m.find()) {
if (m.start() > 0) tokens << str[lastMatch..<m.start()]
tokens << m.group()
lastMatch=m.end()
}
if (lastMatch < str.length()) tokens << str[lastMatch..<str.length()]
tokens
}
[['<html><head><title>this is the title</title></head>',/<[^>]+>/],
['before<html><head><title>this is the title</title></head>after',/<[^>]+>/]
].each {
println splitWithTokens(*it)
}
An extremely naive and inefficient solution which works nevertheless.Use split twice on the string and then concatenate the two arrays
String temp[]=str.split("\\W");
String temp2[]=str.split("\\w||\\s");
int i=0;
for(String string:temp)
System.out.println(string);
String temp3[]=new String[temp.length-1];
for(String string:temp2)
{
System.out.println(string);
if((string.equals("")!=true)&&(string.equals("\\s")!=true))
{
temp3[i]=string;
i++;
}
// System.out.println(temp.length);
// System.out.println(temp2.length);
}
System.out.println(temp3.length);
String[] temp4=new String[temp.length+temp3.length];
int j=0;
for(i=0;i<temp.length;i++)
{
temp4[j]=temp[i];
j=j+2;
}
j=1;
for(i=0;i<temp3.length;i++)
{
temp4[j]=temp3[i];
j+=2;
}
for(String s:temp4)
System.out.println(s);
String expression = "((A+B)*C-D)*E";
expression = expression.replaceAll("\\+", "~+~");
expression = expression.replaceAll("\\*", "~*~");
expression = expression.replaceAll("-", "~-~");
expression = expression.replaceAll("/+", "~/~");
expression = expression.replaceAll("\\(", "~(~"); //also you can use [(] instead of \\(
expression = expression.replaceAll("\\)", "~)~"); //also you can use [)] instead of \\)
expression = expression.replaceAll("~~", "~");
if(expression.startsWith("~")) {
expression = expression.substring(1);
}
String[] expressionArray = expression.split("~");
System.out.println(Arrays.toString(expressionArray));
One of the subtleties in this question involves the "leading delimiter" question: if you are going to have a combined array of tokens and delimiters you have to know whether it starts with a token or a delimiter. You could of course just assume that a leading delim should be discarded but this seems an unjustified assumption. You might also want to know whether you have a trailing delim or not. This sets two boolean flags accordingly.
Written in Groovy but a Java version should be fairly obvious:
String tokenRegex = /[\p{L}\p{N}]+/ // a String in Groovy, Unicode alphanumeric
def finder = phraseForTokenising =~ tokenRegex
// NB in Groovy the variable 'finder' is then of class java.util.regex.Matcher
def finderIt = finder.iterator() // extra method added to Matcher by Groovy magic
int start = 0
boolean leadingDelim, trailingDelim
def combinedTokensAndDelims = [] // create an array in Groovy
while( finderIt.hasNext() )
{
def token = finderIt.next()
int finderStart = finder.start()
String delim = phraseForTokenising[ start .. finderStart - 1 ]
// Groovy: above gets slice of String/array
if( start == 0 ) leadingDelim = finderStart != 0
if( start > 0 || leadingDelim ) combinedTokensAndDelims << delim
combinedTokensAndDelims << token // add element to end of array
start = finder.end()
}
// start == 0 indicates no tokens found
if( start > 0 ) {
// finish by seeing whether there is a trailing delim
trailingDelim = start < phraseForTokenising.length()
if( trailingDelim ) combinedTokensAndDelims << phraseForTokenising[ start .. -1 ]
println( "leading delim? $leadingDelim, trailing delim? $trailingDelim, combined array:\n $combinedTokensAndDelims" )
}
If you want keep character then use split method with loophole in .split() method.
See this example:
public class SplitExample {
public static void main(String[] args) {
String str = "Javathomettt";
System.out.println("method 1");
System.out.println("Returning words:");
String[] arr = str.split("t", 40);
for (String w : arr) {
System.out.println(w+"t");
}
System.out.println("Split array length: "+arr.length);
System.out.println("method 2");
System.out.println(str.replaceAll("t", "\n"+"t"));
}
I don't know Java too well, but if you can't find a Split method that does that, I suggest you just make your own.
string[] mySplit(string s,string delimiter)
{
string[] result = s.Split(delimiter);
for(int i=0;i<result.Length-1;i++)
{
result[i] += delimiter; //this one would add the delimiter to each items end except the last item,
//you can modify it however you want
}
}
string[] res = mySplit(myString,myDelimiter);
Its not too elegant, but it'll do.
I'm facing a problem in replacing character in a string with its index.
e.g I wanna replace every '?' With its index String:
"a?ghmars?bh?" -> will be "a1ghmars8bh11".
Any help is truly appreciated.
P.s I need to solve this assignment today so I can pass it to my instructor.
Thanks in adv.
So far I get to manage replacing the ? With 0; through this piece of code:
public static void main(String[] args) {
String name = "?tsds?dsds?";
String myarray[] = name.split("");
for (int i = 0; i < myarray.length; i++) {
name = name.replace("?", String.valueOf(i++));
}
System.out.println(name);
output:
0tsds0dsds0
it should be:
0tsds5dsds10
For simple replace operations, String.replaceAll is sufficient. For more complex operations, you have to retrace partly, what this method does.
The documentation of String.replaceAll says that it is equivalent to
Pattern.compile(regex).matcher(str).replaceAll(repl)
whereas the linked documentation of replaceAll contains a reference to the method appendReplacement which is provided by Java’s regex package publicly for exactly the purpose of supporting customized replace operations. It’s documentation also gives a code example of the ordinary replaceAll operation:
Pattern p = Pattern.compile("cat");
Matcher m = p.matcher("one cat two cats in the yard");
StringBuffer sb = new StringBuffer();
while (m.find()) {
m.appendReplacement(sb, "dog");
}
m.appendTail(sb);
System.out.println(sb.toString());
Using this template, we can implement the desired operation as follows:
String name = "?tsds?dsds?";
Matcher m=Pattern.compile("?", Pattern.LITERAL).matcher(name);
StringBuffer sb=new StringBuffer();
while(m.find()) {
m.appendReplacement(sb, String.valueOf(m.start()));
}
m.appendTail(sb);
name=sb.toString();
System.out.println(name);
The differences are that we use a LITERAL pattern to inhibit the special meaning of ? in regular expressions (that’s easier to read than using "\\?" as pattern). Further, we specify a String representation of the found match’s location as the replacement (which is what your question was all about). That’s it.
In previous answer wrong read question, sorry. This code replace every "?" with its index
String string = "a?ghmars?bh?das?";
while ( string.contains( "?" ) )
{
Integer index = string.indexOf( "?" );
string = string.replaceFirst( "\\?", index.toString() );
System.out.println( string );
}
So from "a?ghmars?bh?das?" we got "a1ghmars8bh11das16"
You are (more or less) replacing each target with the cardinal number of the occurrence (1 for 1st, 2 for 2nd, etc) but you want the index.
Use a StringBuilder - you only need a few lines:
StringBuilder sb = new StringBuilder(name);
for (int i = name.length - 1; i <= 0; i--)
if (name.charAt(i) == '?')
sb.replace(i, i + 1, i + "");
Note counting down, not up, allowing for the replacement index to be multiple digits, which if you counted up would change the index of subsequent calls (eg everything would get shuffled to the right by one char when the index of "?" was 10 or more).
I think this may work i have not checked it.
public class Stack{
public static void main(String[] args) {
String name = "?tsds?dsds?";
int newvalue=50;
int countspecialcharacter=0;
for(int i=0;i<name.length();i++)
{
char a=name.charAt(i);
switch(a)
{
case'?':
countspecialcharacter++;
if(countspecialcharacter>1)
{
newvalue=newvalue+50;
System.out.print(newvalue);
}
else
{
System.out.print(i);
}
break;
default:
System.out.print(a);
break;
}
}
}
}
Check below code
String string = "a?ghmars?bh?das?";
for (int i = 0; i < string.length(); i++) {
Character r=string.charAt(i);
if(r.toString().equals("?"))
System.out.print(i);
else
System.out.print(r);
}
I am writing a method which should replace all words which matches with ones from the list with '****'
characters. So far I have code which works but all special characters are ignored.
I have tried with "\\W" in my expression but looks like I didn't use it well so I could use some help.
Here's code I have so far:
for(int i = 0; i < badWords.size(); i++) {
if (StringUtils.containsIgnoreCase(stringToCheck, badWords.get(i))) {
stringToCheck = stringToCheck.replaceAll("(?i)\\b" + badWords.get(i) + "\\b", "****");
}
}
E.g. I have list of words ['bad', '#$$'].
If I have a string: "This is bad string with #$$" I am expecting this method to return "This is **** string with ****"
Note that method should be aware of case sensitive words, e.g. TesT and test should handle same.
I'm not sure why you use the StringUtils you can just directly replace words that match the bad words. This code works for me:
public static void main(String[] args) {
ArrayList<String> badWords = new ArrayList<String>();
badWords.add("test");
badWords.add("BadTest");
badWords.add("\\$\\$");
String test = "This is a TeSt and a $$ with Badtest.";
for(int i = 0; i < badWords.size(); i++) {
test = test.replaceAll("(?i)" + badWords.get(i), "****");
}
test = test.replaceAll("\\w*\\*{4}", "****");
System.out.println(test);
}
Output:
This is a **** and a **** with ****.
The problem is that these special characters e.g. $ are regex control characters and not literal characters. You'll need to escape any occurrence of the following characters in the bad word using two backslashes:
{}()\[].+*?^$|
My guess is that your list of bad words contains special characters that have particular meanings when interpreted in a regular expression (which is what the replaceAll method does). $, for example, typically matches the end of the string/line. So I'd recommend a combination of things:
Don't use containsIgnoreCase to identify whether a replacement needs to be done. Just let the replaceAll run each time - if there is no match against the bad word list, nothing will be done to the string.
The characters like $ that have special meanings in regular expressions should be escaped when they are added into the bad word list. For example, badwords.add("#\\$\\$");
Try something like this:
String stringToCheck = "This is b!d string with #$$";
List<String> badWords = asList("b!d","#$$");
for(int i = 0; i < badWords.size(); i++) {
if (StringUtils.containsIgnoreCase(stringToCheck,badWords.get(i))) {
stringToCheck = stringToCheck.replaceAll("["+badWords.get(i)+"]+","****");
}
}
System.out.println(stringToCheck);
Another solution: bad words matched with word boundaries (and case insensitive).
Pattern badWords = Pattern.compile("\\b(a|b|ĉĉĉ|dddd)\\b",
Pattern.UNICODE_CASE | Pattern.CASE_INSENSITIVE);
String text = "adfsa a dfs bb addfdsaf ĉĉĉ adsfs dddd asdfaf a";
Matcher m = badWords.matcher(text);
StringBuffer sb = new StringBuffer(text.length());
while (m.find()) {
m.appendReplacement(sb, stars(m.group(1)));
}
m.appendTail(sb);
String cleanText = sb.toString();
System.out.println(text);
System.out.println(cleanText);
}
private static String stars(String s) {
return s.replaceAll("(?su).", "*");
/*
int cpLength = s.codePointCount(0, s.length());
final String stars = "******************************";
return cpLength >= stars.length() ? stars : stars.substring(0, cpLength);
*/
}
And then (in comment) the stars with the correct count: one star for a Unicode code point giving two surrogate pairs (two UTF-16 chars).
I have a multiline string which is delimited by a set of different delimiters:
(Text1)(DelimiterA)(Text2)(DelimiterC)(Text3)(DelimiterB)(Text4)
I can split this string into its parts, using String.split, but it seems that I can't get the actual string, which matched the delimiter regex.
In other words, this is what I get:
Text1
Text2
Text3
Text4
This is what I want
Text1
DelimiterA
Text2
DelimiterC
Text3
DelimiterB
Text4
Is there any JDK way to split the string using a delimiter regex but also keep the delimiters?
You can use lookahead and lookbehind, which are features of regular expressions.
System.out.println(Arrays.toString("a;b;c;d".split("(?<=;)")));
System.out.println(Arrays.toString("a;b;c;d".split("(?=;)")));
System.out.println(Arrays.toString("a;b;c;d".split("((?<=;)|(?=;))")));
And you will get:
[a;, b;, c;, d]
[a, ;b, ;c, ;d]
[a, ;, b, ;, c, ;, d]
The last one is what you want.
((?<=;)|(?=;)) equals to select an empty character before ; or after ;.
EDIT: Fabian Steeg's comments on readability is valid. Readability is always a problem with regular expressions. One thing I do to make regular expressions more readable is to create a variable, the name of which represents what the regular expression does. You can even put placeholders (e.g. %1$s) and use Java's String.format to replace the placeholders with the actual string you need to use; for example:
static public final String WITH_DELIMITER = "((?<=%1$s)|(?=%1$s))";
public void someMethod() {
final String[] aEach = "a;b;c;d".split(String.format(WITH_DELIMITER, ";"));
...
}
You want to use lookarounds, and split on zero-width matches. Here are some examples:
public class SplitNDump {
static void dump(String[] arr) {
for (String s : arr) {
System.out.format("[%s]", s);
}
System.out.println();
}
public static void main(String[] args) {
dump("1,234,567,890".split(","));
// "[1][234][567][890]"
dump("1,234,567,890".split("(?=,)"));
// "[1][,234][,567][,890]"
dump("1,234,567,890".split("(?<=,)"));
// "[1,][234,][567,][890]"
dump("1,234,567,890".split("(?<=,)|(?=,)"));
// "[1][,][234][,][567][,][890]"
dump(":a:bb::c:".split("(?=:)|(?<=:)"));
// "[][:][a][:][bb][:][:][c][:]"
dump(":a:bb::c:".split("(?=(?!^):)|(?<=:)"));
// "[:][a][:][bb][:][:][c][:]"
dump(":::a::::b b::c:".split("(?=(?!^):)(?<!:)|(?!:)(?<=:)"));
// "[:::][a][::::][b b][::][c][:]"
dump("a,bb:::c d..e".split("(?!^)\\b"));
// "[a][,][bb][:::][c][ ][d][..][e]"
dump("ArrayIndexOutOfBoundsException".split("(?<=[a-z])(?=[A-Z])"));
// "[Array][Index][Out][Of][Bounds][Exception]"
dump("1234567890".split("(?<=\\G.{4})"));
// "[1234][5678][90]"
// Split at the end of each run of letter
dump("Boooyaaaah! Yippieeee!!".split("(?<=(?=(.)\\1(?!\\1))..)"));
// "[Booo][yaaaa][h! Yipp][ieeee][!!]"
}
}
And yes, that is triply-nested assertion there in the last pattern.
Related questions
Java split is eating my characters.
Can you use zero-width matching regex in String split?
How do I convert CamelCase into human-readable names in Java?
Backreferences in lookbehind
See also
regular-expressions.info/Lookarounds
A very naive solution, that doesn't involve regex would be to perform a string replace on your delimiter along the lines of (assuming comma for delimiter):
string.replace(FullString, "," , "~,~")
Where you can replace tilda (~) with an appropriate unique delimiter.
Then if you do a split on your new delimiter then i believe you will get the desired result.
import java.util.regex.*;
import java.util.LinkedList;
public class Splitter {
private static final Pattern DEFAULT_PATTERN = Pattern.compile("\\s+");
private Pattern pattern;
private boolean keep_delimiters;
public Splitter(Pattern pattern, boolean keep_delimiters) {
this.pattern = pattern;
this.keep_delimiters = keep_delimiters;
}
public Splitter(String pattern, boolean keep_delimiters) {
this(Pattern.compile(pattern==null?"":pattern), keep_delimiters);
}
public Splitter(Pattern pattern) { this(pattern, true); }
public Splitter(String pattern) { this(pattern, true); }
public Splitter(boolean keep_delimiters) { this(DEFAULT_PATTERN, keep_delimiters); }
public Splitter() { this(DEFAULT_PATTERN); }
public String[] split(String text) {
if (text == null) {
text = "";
}
int last_match = 0;
LinkedList<String> splitted = new LinkedList<String>();
Matcher m = this.pattern.matcher(text);
while (m.find()) {
splitted.add(text.substring(last_match,m.start()));
if (this.keep_delimiters) {
splitted.add(m.group());
}
last_match = m.end();
}
splitted.add(text.substring(last_match));
return splitted.toArray(new String[splitted.size()]);
}
public static void main(String[] argv) {
if (argv.length != 2) {
System.err.println("Syntax: java Splitter <pattern> <text>");
return;
}
Pattern pattern = null;
try {
pattern = Pattern.compile(argv[0]);
}
catch (PatternSyntaxException e) {
System.err.println(e);
return;
}
Splitter splitter = new Splitter(pattern);
String text = argv[1];
int counter = 1;
for (String part : splitter.split(text)) {
System.out.printf("Part %d: \"%s\"\n", counter++, part);
}
}
}
/*
Example:
> java Splitter "\W+" "Hello World!"
Part 1: "Hello"
Part 2: " "
Part 3: "World"
Part 4: "!"
Part 5: ""
*/
I don't really like the other way, where you get an empty element in front and back. A delimiter is usually not at the beginning or at the end of the string, thus you most often end up wasting two good array slots.
Edit: Fixed limit cases. Commented source with test cases can be found here: http://snippets.dzone.com/posts/show/6453
Pass the 3rd aurgument as "true". It will return delimiters as well.
StringTokenizer(String str, String delimiters, true);
I know this is a very-very old question and answer has also been accepted. But still I would like to submit a very simple answer to original question. Consider this code:
String str = "Hello-World:How\nAre You&doing";
inputs = str.split("(?!^)\\b");
for (int i=0; i<inputs.length; i++) {
System.out.println("a[" + i + "] = \"" + inputs[i] + '"');
}
OUTPUT:
a[0] = "Hello"
a[1] = "-"
a[2] = "World"
a[3] = ":"
a[4] = "How"
a[5] = "
"
a[6] = "Are"
a[7] = " "
a[8] = "You"
a[9] = "&"
a[10] = "doing"
I am just using word boundary \b to delimit the words except when it is start of text.
I got here late, but returning to the original question, why not just use lookarounds?
Pattern p = Pattern.compile("(?<=\\w)(?=\\W)|(?<=\\W)(?=\\w)");
System.out.println(Arrays.toString(p.split("'ab','cd','eg'")));
System.out.println(Arrays.toString(p.split("boo:and:foo")));
output:
[', ab, ',', cd, ',', eg, ']
[boo, :, and, :, foo]
EDIT: What you see above is what appears on the command line when I run that code, but I now see that it's a bit confusing. It's difficult to keep track of which commas are part of the result and which were added by Arrays.toString(). SO's syntax highlighting isn't helping either. In hopes of getting the highlighting to work with me instead of against me, here's how those arrays would look it I were declaring them in source code:
{ "'", "ab", "','", "cd", "','", "eg", "'" }
{ "boo", ":", "and", ":", "foo" }
I hope that's easier to read. Thanks for the heads-up, #finnw.
I had a look at the above answers and honestly none of them I find satisfactory. What you want to do is essentially mimic the Perl split functionality. Why Java doesn't allow this and have a join() method somewhere is beyond me but I digress. You don't even need a class for this really. Its just a function. Run this sample program:
Some of the earlier answers have excessive null-checking, which I recently wrote a response to a question here:
https://stackoverflow.com/users/18393/cletus
Anyway, the code:
public class Split {
public static List<String> split(String s, String pattern) {
assert s != null;
assert pattern != null;
return split(s, Pattern.compile(pattern));
}
public static List<String> split(String s, Pattern pattern) {
assert s != null;
assert pattern != null;
Matcher m = pattern.matcher(s);
List<String> ret = new ArrayList<String>();
int start = 0;
while (m.find()) {
ret.add(s.substring(start, m.start()));
ret.add(m.group());
start = m.end();
}
ret.add(start >= s.length() ? "" : s.substring(start));
return ret;
}
private static void testSplit(String s, String pattern) {
System.out.printf("Splitting '%s' with pattern '%s'%n", s, pattern);
List<String> tokens = split(s, pattern);
System.out.printf("Found %d matches%n", tokens.size());
int i = 0;
for (String token : tokens) {
System.out.printf(" %d/%d: '%s'%n", ++i, tokens.size(), token);
}
System.out.println();
}
public static void main(String args[]) {
testSplit("abcdefghij", "z"); // "abcdefghij"
testSplit("abcdefghij", "f"); // "abcde", "f", "ghi"
testSplit("abcdefghij", "j"); // "abcdefghi", "j", ""
testSplit("abcdefghij", "a"); // "", "a", "bcdefghij"
testSplit("abcdefghij", "[bdfh]"); // "a", "b", "c", "d", "e", "f", "g", "h", "ij"
}
}
I like the idea of StringTokenizer because it is Enumerable.
But it is also obsolete, and replace by String.split which return a boring String[] (and does not includes the delimiters).
So I implemented a StringTokenizerEx which is an Iterable, and which takes a true regexp to split a string.
A true regexp means it is not a 'Character sequence' repeated to form the delimiter:
'o' will only match 'o', and split 'ooo' into three delimiter, with two empty string inside:
[o], '', [o], '', [o]
But the regexp o+ will return the expected result when splitting "aooob"
[], 'a', [ooo], 'b', []
To use this StringTokenizerEx:
final StringTokenizerEx aStringTokenizerEx = new StringTokenizerEx("boo:and:foo", "o+");
final String firstDelimiter = aStringTokenizerEx.getDelimiter();
for(String aString: aStringTokenizerEx )
{
// uses the split String detected and memorized in 'aString'
final nextDelimiter = aStringTokenizerEx.getDelimiter();
}
The code of this class is available at DZone Snippets.
As usual for a code-challenge response (one self-contained class with test cases included), copy-paste it (in a 'src/test' directory) and run it. Its main() method illustrates the different usages.
Note: (late 2009 edit)
The article Final Thoughts: Java Puzzler: Splitting Hairs does a good work explaning the bizarre behavior in String.split().
Josh Bloch even commented in response to that article:
Yes, this is a pain. FWIW, it was done for a very good reason: compatibility with Perl.
The guy who did it is Mike "madbot" McCloskey, who now works with us at Google. Mike made sure that Java's regular expressions passed virtually every one of the 30K Perl regular expression tests (and ran faster).
The Google common-library Guava contains also a Splitter which is:
simpler to use
maintained by Google (and not by you)
So it may worth being checked out. From their initial rough documentation (pdf):
JDK has this:
String[] pieces = "foo.bar".split("\\.");
It's fine to use this if you want exactly what it does:
- regular expression
- result as an array
- its way of handling empty pieces
Mini-puzzler: ",a,,b,".split(",") returns...
(a) "", "a", "", "b", ""
(b) null, "a", null, "b", null
(c) "a", null, "b"
(d) "a", "b"
(e) None of the above
Answer: (e) None of the above.
",a,,b,".split(",")
returns
"", "a", "", "b"
Only trailing empties are skipped! (Who knows the workaround to prevent the skipping? It's a fun one...)
In any case, our Splitter is simply more flexible: The default behavior is simplistic:
Splitter.on(',').split(" foo, ,bar, quux,")
--> [" foo", " ", "bar", " quux", ""]
If you want extra features, ask for them!
Splitter.on(',')
.trimResults()
.omitEmptyStrings()
.split(" foo, ,bar, quux,")
--> ["foo", "bar", "quux"]
Order of config methods doesn't matter -- during splitting, trimming happens before checking for empties.
Here is a simple clean implementation which is consistent with Pattern#split and works with variable length patterns, which look behind cannot support, and it is easier to use. It is similar to the solution provided by #cletus.
public static String[] split(CharSequence input, String pattern) {
return split(input, Pattern.compile(pattern));
}
public static String[] split(CharSequence input, Pattern pattern) {
Matcher matcher = pattern.matcher(input);
int start = 0;
List<String> result = new ArrayList<>();
while (matcher.find()) {
result.add(input.subSequence(start, matcher.start()).toString());
result.add(matcher.group());
start = matcher.end();
}
if (start != input.length()) result.add(input.subSequence(start, input.length()).toString());
return result.toArray(new String[0]);
}
I don't do null checks here, Pattern#split doesn't, why should I. I don't like the if at the end but it is required for consistency with the Pattern#split . Otherwise I would unconditionally append, resulting in an empty string as the last element of the result if the input string ends with the pattern.
I convert to String[] for consistency with Pattern#split, I use new String[0] rather than new String[result.size()], see here for why.
Here are my tests:
#Test
public void splitsVariableLengthPattern() {
String[] result = Split.split("/foo/$bar/bas", "\\$\\w+");
Assert.assertArrayEquals(new String[] { "/foo/", "$bar", "/bas" }, result);
}
#Test
public void splitsEndingWithPattern() {
String[] result = Split.split("/foo/$bar", "\\$\\w+");
Assert.assertArrayEquals(new String[] { "/foo/", "$bar" }, result);
}
#Test
public void splitsStartingWithPattern() {
String[] result = Split.split("$foo/bar", "\\$\\w+");
Assert.assertArrayEquals(new String[] { "", "$foo", "/bar" }, result);
}
#Test
public void splitsNoMatchesPattern() {
String[] result = Split.split("/foo/bar", "\\$\\w+");
Assert.assertArrayEquals(new String[] { "/foo/bar" }, result);
}
I will post my working versions also(first is really similar to Markus).
public static String[] splitIncludeDelimeter(String regex, String text){
List<String> list = new LinkedList<>();
Matcher matcher = Pattern.compile(regex).matcher(text);
int now, old = 0;
while(matcher.find()){
now = matcher.end();
list.add(text.substring(old, now));
old = now;
}
if(list.size() == 0)
return new String[]{text};
//adding rest of a text as last element
String finalElement = text.substring(old);
list.add(finalElement);
return list.toArray(new String[list.size()]);
}
And here is second solution and its round 50% faster than first one:
public static String[] splitIncludeDelimeter2(String regex, String text){
List<String> list = new LinkedList<>();
Matcher matcher = Pattern.compile(regex).matcher(text);
StringBuffer stringBuffer = new StringBuffer();
while(matcher.find()){
matcher.appendReplacement(stringBuffer, matcher.group());
list.add(stringBuffer.toString());
stringBuffer.setLength(0); //clear buffer
}
matcher.appendTail(stringBuffer); ///dodajemy reszte ciagu
list.add(stringBuffer.toString());
return list.toArray(new String[list.size()]);
}
Another candidate solution using a regex. Retains token order, correctly matches multiple tokens of the same type in a row. The downside is that the regex is kind of nasty.
package javaapplication2;
import java.util.ArrayList;
import java.util.List;
import java.util.regex.Matcher;
import java.util.regex.Pattern;
public class JavaApplication2 {
/**
* #param args the command line arguments
*/
public static void main(String[] args) {
String num = "58.5+variable-+98*78/96+a/78.7-3443*12-3";
// Terrifying regex:
// (a)|(b)|(c) match a or b or c
// where
// (a) is one or more digits optionally followed by a decimal point
// followed by one or more digits: (\d+(\.\d+)?)
// (b) is one of the set + * / - occurring once: ([+*/-])
// (c) is a sequence of one or more lowercase latin letter: ([a-z]+)
Pattern tokenPattern = Pattern.compile("(\\d+(\\.\\d+)?)|([+*/-])|([a-z]+)");
Matcher tokenMatcher = tokenPattern.matcher(num);
List<String> tokens = new ArrayList<>();
while (!tokenMatcher.hitEnd()) {
if (tokenMatcher.find()) {
tokens.add(tokenMatcher.group());
} else {
// report error
break;
}
}
System.out.println(tokens);
}
}
Sample output:
[58.5, +, variable, -, +, 98, *, 78, /, 96, +, a, /, 78.7, -, 3443, *, 12, -, 3]
I don't know of an existing function in the Java API that does this (which is not to say it doesn't exist), but here's my own implementation (one or more delimiters will be returned as a single token; if you want each delimiter to be returned as a separate token, it will need a bit of adaptation):
static String[] splitWithDelimiters(String s) {
if (s == null || s.length() == 0) {
return new String[0];
}
LinkedList<String> result = new LinkedList<String>();
StringBuilder sb = null;
boolean wasLetterOrDigit = !Character.isLetterOrDigit(s.charAt(0));
for (char c : s.toCharArray()) {
if (Character.isLetterOrDigit(c) ^ wasLetterOrDigit) {
if (sb != null) {
result.add(sb.toString());
}
sb = new StringBuilder();
wasLetterOrDigit = !wasLetterOrDigit;
}
sb.append(c);
}
result.add(sb.toString());
return result.toArray(new String[0]);
}
I suggest using Pattern and Matcher, which will almost certainly achieve what you want. Your regular expression will need to be somewhat more complicated than what you are using in String.split.
I don't think it is possible with String#split, but you can use a StringTokenizer, though that won't allow you to define your delimiter as a regex, but only as a class of single-digit characters:
new StringTokenizer("Hello, world. Hi!", ",.!", true); // true for returnDelims
If you can afford, use Java's replace(CharSequence target, CharSequence replacement) method and fill in another delimiter to split with.
Example:
I want to split the string "boo:and:foo" and keep ':' at its righthand String.
String str = "boo:and:foo";
str = str.replace(":","newdelimiter:");
String[] tokens = str.split("newdelimiter");
Important note: This only works if you have no further "newdelimiter" in your String! Thus, it is not a general solution.
But if you know a CharSequence of which you can be sure that it will never appear in the String, this is a very simple solution.
Fast answer: use non physical bounds like \b to split. I will try and experiment to see if it works (used that in PHP and JS).
It is possible, and kind of work, but might split too much. Actually, it depends on the string you want to split and the result you need. Give more details, we will help you better.
Another way is to do your own split, capturing the delimiter (supposing it is variable) and adding it afterward to the result.
My quick test:
String str = "'ab','cd','eg'";
String[] stra = str.split("\\b");
for (String s : stra) System.out.print(s + "|");
System.out.println();
Result:
'|ab|','|cd|','|eg|'|
A bit too much... :-)
Tweaked Pattern.split() to include matched pattern to the list
Added
// add match to the list
matchList.add(input.subSequence(start, end).toString());
Full source
public static String[] inclusiveSplit(String input, String re, int limit) {
int index = 0;
boolean matchLimited = limit > 0;
ArrayList<String> matchList = new ArrayList<String>();
Pattern pattern = Pattern.compile(re);
Matcher m = pattern.matcher(input);
// Add segments before each match found
while (m.find()) {
int end = m.end();
if (!matchLimited || matchList.size() < limit - 1) {
int start = m.start();
String match = input.subSequence(index, start).toString();
matchList.add(match);
// add match to the list
matchList.add(input.subSequence(start, end).toString());
index = end;
} else if (matchList.size() == limit - 1) { // last one
String match = input.subSequence(index, input.length())
.toString();
matchList.add(match);
index = end;
}
}
// If no match was found, return this
if (index == 0)
return new String[] { input.toString() };
// Add remaining segment
if (!matchLimited || matchList.size() < limit)
matchList.add(input.subSequence(index, input.length()).toString());
// Construct result
int resultSize = matchList.size();
if (limit == 0)
while (resultSize > 0 && matchList.get(resultSize - 1).equals(""))
resultSize--;
String[] result = new String[resultSize];
return matchList.subList(0, resultSize).toArray(result);
}
Here's a groovy version based on some of the code above, in case it helps. It's short, anyway. Conditionally includes the head and tail (if they are not empty). The last part is a demo/test case.
List splitWithTokens(str, pat) {
def tokens=[]
def lastMatch=0
def m = str=~pat
while (m.find()) {
if (m.start() > 0) tokens << str[lastMatch..<m.start()]
tokens << m.group()
lastMatch=m.end()
}
if (lastMatch < str.length()) tokens << str[lastMatch..<str.length()]
tokens
}
[['<html><head><title>this is the title</title></head>',/<[^>]+>/],
['before<html><head><title>this is the title</title></head>after',/<[^>]+>/]
].each {
println splitWithTokens(*it)
}
An extremely naive and inefficient solution which works nevertheless.Use split twice on the string and then concatenate the two arrays
String temp[]=str.split("\\W");
String temp2[]=str.split("\\w||\\s");
int i=0;
for(String string:temp)
System.out.println(string);
String temp3[]=new String[temp.length-1];
for(String string:temp2)
{
System.out.println(string);
if((string.equals("")!=true)&&(string.equals("\\s")!=true))
{
temp3[i]=string;
i++;
}
// System.out.println(temp.length);
// System.out.println(temp2.length);
}
System.out.println(temp3.length);
String[] temp4=new String[temp.length+temp3.length];
int j=0;
for(i=0;i<temp.length;i++)
{
temp4[j]=temp[i];
j=j+2;
}
j=1;
for(i=0;i<temp3.length;i++)
{
temp4[j]=temp3[i];
j+=2;
}
for(String s:temp4)
System.out.println(s);
String expression = "((A+B)*C-D)*E";
expression = expression.replaceAll("\\+", "~+~");
expression = expression.replaceAll("\\*", "~*~");
expression = expression.replaceAll("-", "~-~");
expression = expression.replaceAll("/+", "~/~");
expression = expression.replaceAll("\\(", "~(~"); //also you can use [(] instead of \\(
expression = expression.replaceAll("\\)", "~)~"); //also you can use [)] instead of \\)
expression = expression.replaceAll("~~", "~");
if(expression.startsWith("~")) {
expression = expression.substring(1);
}
String[] expressionArray = expression.split("~");
System.out.println(Arrays.toString(expressionArray));
One of the subtleties in this question involves the "leading delimiter" question: if you are going to have a combined array of tokens and delimiters you have to know whether it starts with a token or a delimiter. You could of course just assume that a leading delim should be discarded but this seems an unjustified assumption. You might also want to know whether you have a trailing delim or not. This sets two boolean flags accordingly.
Written in Groovy but a Java version should be fairly obvious:
String tokenRegex = /[\p{L}\p{N}]+/ // a String in Groovy, Unicode alphanumeric
def finder = phraseForTokenising =~ tokenRegex
// NB in Groovy the variable 'finder' is then of class java.util.regex.Matcher
def finderIt = finder.iterator() // extra method added to Matcher by Groovy magic
int start = 0
boolean leadingDelim, trailingDelim
def combinedTokensAndDelims = [] // create an array in Groovy
while( finderIt.hasNext() )
{
def token = finderIt.next()
int finderStart = finder.start()
String delim = phraseForTokenising[ start .. finderStart - 1 ]
// Groovy: above gets slice of String/array
if( start == 0 ) leadingDelim = finderStart != 0
if( start > 0 || leadingDelim ) combinedTokensAndDelims << delim
combinedTokensAndDelims << token // add element to end of array
start = finder.end()
}
// start == 0 indicates no tokens found
if( start > 0 ) {
// finish by seeing whether there is a trailing delim
trailingDelim = start < phraseForTokenising.length()
if( trailingDelim ) combinedTokensAndDelims << phraseForTokenising[ start .. -1 ]
println( "leading delim? $leadingDelim, trailing delim? $trailingDelim, combined array:\n $combinedTokensAndDelims" )
}
If you want keep character then use split method with loophole in .split() method.
See this example:
public class SplitExample {
public static void main(String[] args) {
String str = "Javathomettt";
System.out.println("method 1");
System.out.println("Returning words:");
String[] arr = str.split("t", 40);
for (String w : arr) {
System.out.println(w+"t");
}
System.out.println("Split array length: "+arr.length);
System.out.println("method 2");
System.out.println(str.replaceAll("t", "\n"+"t"));
}
I don't know Java too well, but if you can't find a Split method that does that, I suggest you just make your own.
string[] mySplit(string s,string delimiter)
{
string[] result = s.Split(delimiter);
for(int i=0;i<result.Length-1;i++)
{
result[i] += delimiter; //this one would add the delimiter to each items end except the last item,
//you can modify it however you want
}
}
string[] res = mySplit(myString,myDelimiter);
Its not too elegant, but it'll do.