Related
How does Java handle integer underflows and overflows?
Leading on from that, how would you check/test that this is occurring?
If it overflows, it goes back to the minimum value and continues from there. If it underflows, it goes back to the maximum value and continues from there.
You can check that beforehand as follows:
public static boolean willAdditionOverflow(int left, int right) {
if (right < 0 && right != Integer.MIN_VALUE) {
return willSubtractionOverflow(left, -right);
} else {
return (~(left ^ right) & (left ^ (left + right))) < 0;
}
}
public static boolean willSubtractionOverflow(int left, int right) {
if (right < 0) {
return willAdditionOverflow(left, -right);
} else {
return ((left ^ right) & (left ^ (left - right))) < 0;
}
}
(you can substitute int by long to perform the same checks for long)
If you think that this may occur more than often, then consider using a datatype or object which can store larger values, e.g. long or maybe java.math.BigInteger. The last one doesn't overflow, practically, the available JVM memory is the limit.
If you happen to be on Java8 already, then you can make use of the new Math#addExact() and Math#subtractExact() methods which will throw an ArithmeticException on overflow.
public static boolean willAdditionOverflow(int left, int right) {
try {
Math.addExact(left, right);
return false;
} catch (ArithmeticException e) {
return true;
}
}
public static boolean willSubtractionOverflow(int left, int right) {
try {
Math.subtractExact(left, right);
return false;
} catch (ArithmeticException e) {
return true;
}
}
The source code can be found here and here respectively.
Of course, you could also just use them right away instead of hiding them in a boolean utility method.
Well, as far as primitive integer types go, Java doesnt handle Over/Underflow at all (for float and double the behaviour is different, it will flush to +/- infinity just as IEEE-754 mandates).
When adding two int's, you will get no indication when an overflow occurs. A simple method to check for overflow is to use the next bigger type to actually perform the operation and check if the result is still in range for the source type:
public int addWithOverflowCheck(int a, int b) {
// the cast of a is required, to make the + work with long precision,
// if we just added (a + b) the addition would use int precision and
// the result would be cast to long afterwards!
long result = ((long) a) + b;
if (result > Integer.MAX_VALUE) {
throw new RuntimeException("Overflow occured");
} else if (result < Integer.MIN_VALUE) {
throw new RuntimeException("Underflow occured");
}
// at this point we can safely cast back to int, we checked before
// that the value will be withing int's limits
return (int) result;
}
What you would do in place of the throw clauses, depends on your applications requirements (throw, flush to min/max or just log whatever). If you want to detect overflow on long operations, you're out of luck with primitives, use BigInteger instead.
Edit (2014-05-21): Since this question seems to be referred to quite frequently and I had to solve the same problem myself, its quite easy to evaluate the overflow condition by the same method a CPU would calculate its V flag.
Its basically a boolean expression that involves the sign of both operands as well as the result:
/**
* Add two int's with overflow detection (r = s + d)
*/
public static int add(final int s, final int d) throws ArithmeticException {
int r = s + d;
if (((s & d & ~r) | (~s & ~d & r)) < 0)
throw new ArithmeticException("int overflow add(" + s + ", " + d + ")");
return r;
}
In java its simpler to apply the expression (in the if) to the entire 32 bits, and check the result using < 0 (this will effectively test the sign bit). The principle works exactly the same for all integer primitive types, changing all declarations in above method to long makes it work for long.
For smaller types, due to the implicit conversion to int (see the JLS for bitwise operations for details), instead of checking < 0, the check needs to mask the sign bit explicitly (0x8000 for short operands, 0x80 for byte operands, adjust casts and parameter declaration appropiately):
/**
* Subtract two short's with overflow detection (r = d - s)
*/
public static short sub(final short d, final short s) throws ArithmeticException {
int r = d - s;
if ((((~s & d & ~r) | (s & ~d & r)) & 0x8000) != 0)
throw new ArithmeticException("short overflow sub(" + s + ", " + d + ")");
return (short) r;
}
(Note that above example uses the expression need for subtract overflow detection)
So how/why do these boolean expressions work? First, some logical thinking reveals that an overflow can only occur if the signs of both arguments are the same. Because, if one argument is negative and one positive, the result (of add) must be closer to zero, or in the extreme case one argument is zero, the same as the other argument. Since the arguments by themselves can't create an overflow condition, their sum can't create an overflow either.
So what happens if both arguments have the same sign? Lets take a look at the case both are positive: adding two arguments that create a sum larger than the types MAX_VALUE, will always yield a negative value, so an overflow occurs if arg1 + arg2 > MAX_VALUE. Now the maximum value that could result would be MAX_VALUE + MAX_VALUE (the extreme case both arguments are MAX_VALUE). For a byte (example) that would mean 127 + 127 = 254. Looking at the bit representations of all values that can result from adding two positive values, one finds that those that overflow (128 to 254) all have bit 7 set, while all that do not overflow (0 to 127) have bit 7 (topmost, sign) cleared. Thats exactly what the first (right) part of the expression checks:
if (((s & d & ~r) | (~s & ~d & r)) < 0)
(~s & ~d & r) becomes true, only if, both operands (s, d) are positive and the result (r) is negative (the expression works on all 32 bits, but the only bit we're interested in is the topmost (sign) bit, which is checked against by the < 0).
Now if both arguments are negative, their sum can never be closer to zero than any of the arguments, the sum must be closer to minus infinity. The most extreme value we can produce is MIN_VALUE + MIN_VALUE, which (again for byte example) shows that for any in range value (-1 to -128) the sign bit is set, while any possible overflowing value (-129 to -256) has the sign bit cleared. So the sign of the result again reveals the overflow condition. Thats what the left half (s & d & ~r) checks for the case where both arguments (s, d) are negative and a result that is positive. The logic is largely equivalent to the positive case; all bit patterns that can result from adding two negative values will have the sign bit cleared if and only if an underflow occured.
By default, Java's int and long math silently wrap around on overflow and underflow. (Integer operations on other integer types are performed by first promoting the operands to int or long, per JLS 4.2.2.)
As of Java 8, java.lang.Math provides addExact, subtractExact, multiplyExact, incrementExact, decrementExact and negateExact static methods for both int and long arguments that perform the named operation, throwing ArithmeticException on overflow. (There's no divideExact method -- you'll have to check the one special case (MIN_VALUE / -1) yourself.)
As of Java 8, java.lang.Math also provides toIntExact to cast a long to an int, throwing ArithmeticException if the long's value does not fit in an int. This can be useful for e.g. computing the sum of ints using unchecked long math, then using toIntExact to cast to int at the end (but be careful not to let your sum overflow).
If you're still using an older version of Java, Google Guava provides IntMath and LongMath static methods for checked addition, subtraction, multiplication and exponentiation (throwing on overflow). These classes also provide methods to compute factorials and binomial coefficients that return MAX_VALUE on overflow (which is less convenient to check). Guava's primitive utility classes, SignedBytes, UnsignedBytes, Shorts and Ints, provide checkedCast methods for narrowing larger types (throwing IllegalArgumentException on under/overflow, not ArithmeticException), as well as saturatingCast methods that return MIN_VALUE or MAX_VALUE on overflow.
Java doesn't do anything with integer overflow for either int or long primitive types and ignores overflow with positive and negative integers.
This answer first describes the of integer overflow, gives an example of how it can happen, even with intermediate values in expression evaluation, and then gives links to resources that give detailed techniques for preventing and detecting integer overflow.
Integer arithmetic and expressions reslulting in unexpected or undetected overflow are a common programming error. Unexpected or undetected integer overflow is also a well-known exploitable security issue, especially as it affects array, stack and list objects.
Overflow can occur in either a positive or negative direction where the positive or negative value would be beyond the maximum or minimum values for the primitive type in question. Overflow can occur in an intermediate value during expression or operation evaluation and affect the outcome of an expression or operation where the final value would be expected to be within range.
Sometimes negative overflow is mistakenly called underflow. Underflow is what happens when a value would be closer to zero than the representation allows. Underflow occurs in integer arithmetic and is expected. Integer underflow happens when an integer evaluation would be between -1 and 0 or 0 and 1. What would be a fractional result truncates to 0. This is normal and expected with integer arithmetic and not considered an error. However, it can lead to code throwing an exception. One example is an "ArithmeticException: / by zero" exception if the result of integer underflow is used as a divisor in an expression.
Consider the following code:
int bigValue = Integer.MAX_VALUE;
int x = bigValue * 2 / 5;
int y = bigValue / x;
which results in x being assigned 0 and the subsequent evaluation of bigValue / x throws an exception, "ArithmeticException: / by zero" (i.e. divide by zero), instead of y being assigned the value 2.
The expected result for x would be 858,993,458 which is less than the maximum int value of 2,147,483,647. However, the intermediate result from evaluating Integer.MAX_Value * 2, would be 4,294,967,294, which exceeds the maximum int value and is -2 in accordance with 2s complement integer representations. The subsequent evaluation of -2 / 5 evaluates to 0 which gets assigned to x.
Rearranging the expression for computing x to an expression that, when evaluated, divides before multiplying, the following code:
int bigValue = Integer.MAX_VALUE;
int x = bigValue / 5 * 2;
int y = bigValue / x;
results in x being assigned 858,993,458 and y being assigned 2, which is expected.
The intermediate result from bigValue / 5 is 429,496,729 which does not exceed the maximum value for an int. Subsequent evaluation of 429,496,729 * 2 doesn't exceed the maximum value for an int and the expected result gets assigned to x. The evaluation for y then does not divide by zero. The evaluations for x and y work as expected.
Java integer values are stored as and behave in accordance with 2s complement signed integer representations. When a resulting value would be larger or smaller than the maximum or minimum integer values, a 2's complement integer value results instead. In situations not expressly designed to use 2s complement behavior, which is most ordinary integer arithmetic situations, the resulting 2s complement value will cause a programming logic or computation error as was shown in the example above. An excellent Wikipedia article describes 2s compliment binary integers here: Two's complement - Wikipedia
There are techniques for avoiding unintentional integer overflow. Techinques may be categorized as using pre-condition testing, upcasting and BigInteger.
Pre-condition testing comprises examining the values going into an arithmetic operation or expression to ensure that an overflow won't occur with those values. Programming and design will need to create testing that ensures input values won't cause overflow and then determine what to do if input values occur that will cause overflow.
Upcasting comprises using a larger primitive type to perform the arithmetic operation or expression and then determining if the resulting value is beyond the maximum or minimum values for an integer. Even with upcasting, it is still possible that the value or some intermediate value in an operation or expression will be beyond the maximum or minimum values for the upcast type and cause overflow, which will also not be detected and will cause unexpected and undesired results. Through analysis or pre-conditions, it may be possible to prevent overflow with upcasting when prevention without upcasting is not possible or practical. If the integers in question are already long primitive types, then upcasting is not possible with primitive types in Java.
The BigInteger technique comprises using BigInteger for the arithmetic operation or expression using library methods that use BigInteger. BigInteger does not overflow. It will use all available memory, if necessary. Its arithmetic methods are normally only slightly less efficient than integer operations. It is still possible that a result using BigInteger may be beyond the maximum or minimum values for an integer, however, overflow will not occur in the arithmetic leading to the result. Programming and design will still need to determine what to do if a BigInteger result is beyond the maximum or minimum values for the desired primitive result type, e.g., int or long.
The Carnegie Mellon Software Engineering Institute's CERT program and Oracle have created a set of standards for secure Java programming. Included in the standards are techniques for preventing and detecting integer overflow. The standard is published as a freely accessible online resource here: The CERT Oracle Secure Coding Standard for Java
The standard's section that describes and contains practical examples of coding techniques for preventing or detecting integer overflow is here: NUM00-J. Detect or prevent integer overflow
Book form and PDF form of The CERT Oracle Secure Coding Standard for Java are also available.
Having just kinda run into this problem myself, here's my solution (for both multiplication and addition):
static boolean wouldOverflowOccurwhenMultiplying(int a, int b) {
// If either a or b are Integer.MIN_VALUE, then multiplying by anything other than 0 or 1 will result in overflow
if (a == 0 || b == 0) {
return false;
} else if (a > 0 && b > 0) { // both positive, non zero
return a > Integer.MAX_VALUE / b;
} else if (b < 0 && a < 0) { // both negative, non zero
return a < Integer.MAX_VALUE / b;
} else { // exactly one of a,b is negative and one is positive, neither are zero
if (b > 0) { // this last if statements protects against Integer.MIN_VALUE / -1, which in itself causes overflow.
return a < Integer.MIN_VALUE / b;
} else { // a > 0
return b < Integer.MIN_VALUE / a;
}
}
}
boolean wouldOverflowOccurWhenAdding(int a, int b) {
if (a > 0 && b > 0) {
return a > Integer.MAX_VALUE - b;
} else if (a < 0 && b < 0) {
return a < Integer.MIN_VALUE - b;
}
return false;
}
feel free to correct if wrong or if can be simplified. I've done some testing with the multiplication method, mostly edge cases, but it could still be wrong.
There are libraries that provide safe arithmetic operations, which check integer overflow/underflow . For example, Guava's IntMath.checkedAdd(int a, int b) returns the sum of a and b, provided it does not overflow, and throws ArithmeticException if a + b overflows in signed int arithmetic.
It wraps around.
e.g:
public class Test {
public static void main(String[] args) {
int i = Integer.MAX_VALUE;
int j = Integer.MIN_VALUE;
System.out.println(i+1);
System.out.println(j-1);
}
}
prints
-2147483648
2147483647
Since java8 the java.lang.Math package has methods like addExact() and multiplyExact() which will throw an ArithmeticException when an overflow occurs.
I think you should use something like this and it is called Upcasting:
public int multiplyBy2(int x) throws ArithmeticException {
long result = 2 * (long) x;
if (result > Integer.MAX_VALUE || result < Integer.MIN_VALUE){
throw new ArithmeticException("Integer overflow");
}
return (int) result;
}
You can read further here:
Detect or prevent integer overflow
It is quite reliable source.
It doesn't do anything -- the under/overflow just happens.
A "-1" that is the result of a computation that overflowed is no different from the "-1" that resulted from any other information. So you can't tell via some status or by inspecting just a value whether it's overflowed.
But you can be smart about your computations in order to avoid overflow, if it matters, or at least know when it will happen. What's your situation?
static final int safeAdd(int left, int right)
throws ArithmeticException {
if (right > 0 ? left > Integer.MAX_VALUE - right
: left < Integer.MIN_VALUE - right) {
throw new ArithmeticException("Integer overflow");
}
return left + right;
}
static final int safeSubtract(int left, int right)
throws ArithmeticException {
if (right > 0 ? left < Integer.MIN_VALUE + right
: left > Integer.MAX_VALUE + right) {
throw new ArithmeticException("Integer overflow");
}
return left - right;
}
static final int safeMultiply(int left, int right)
throws ArithmeticException {
if (right > 0 ? left > Integer.MAX_VALUE/right
|| left < Integer.MIN_VALUE/right
: (right < -1 ? left > Integer.MIN_VALUE/right
|| left < Integer.MAX_VALUE/right
: right == -1
&& left == Integer.MIN_VALUE) ) {
throw new ArithmeticException("Integer overflow");
}
return left * right;
}
static final int safeDivide(int left, int right)
throws ArithmeticException {
if ((left == Integer.MIN_VALUE) && (right == -1)) {
throw new ArithmeticException("Integer overflow");
}
return left / right;
}
static final int safeNegate(int a) throws ArithmeticException {
if (a == Integer.MIN_VALUE) {
throw new ArithmeticException("Integer overflow");
}
return -a;
}
static final int safeAbs(int a) throws ArithmeticException {
if (a == Integer.MIN_VALUE) {
throw new ArithmeticException("Integer overflow");
}
return Math.abs(a);
}
There is one case, that is not mentioned above:
int res = 1;
while (res != 0) {
res *= 2;
}
System.out.println(res);
will produce:
0
This case was discussed here:
Integer overflow produces Zero.
I think this should be fine.
static boolean addWillOverFlow(int a, int b) {
return (Integer.signum(a) == Integer.signum(b)) &&
(Integer.signum(a) != Integer.signum(a+b));
}
How does Java handle integer underflows and overflows?
Leading on from that, how would you check/test that this is occurring?
If it overflows, it goes back to the minimum value and continues from there. If it underflows, it goes back to the maximum value and continues from there.
You can check that beforehand as follows:
public static boolean willAdditionOverflow(int left, int right) {
if (right < 0 && right != Integer.MIN_VALUE) {
return willSubtractionOverflow(left, -right);
} else {
return (~(left ^ right) & (left ^ (left + right))) < 0;
}
}
public static boolean willSubtractionOverflow(int left, int right) {
if (right < 0) {
return willAdditionOverflow(left, -right);
} else {
return ((left ^ right) & (left ^ (left - right))) < 0;
}
}
(you can substitute int by long to perform the same checks for long)
If you think that this may occur more than often, then consider using a datatype or object which can store larger values, e.g. long or maybe java.math.BigInteger. The last one doesn't overflow, practically, the available JVM memory is the limit.
If you happen to be on Java8 already, then you can make use of the new Math#addExact() and Math#subtractExact() methods which will throw an ArithmeticException on overflow.
public static boolean willAdditionOverflow(int left, int right) {
try {
Math.addExact(left, right);
return false;
} catch (ArithmeticException e) {
return true;
}
}
public static boolean willSubtractionOverflow(int left, int right) {
try {
Math.subtractExact(left, right);
return false;
} catch (ArithmeticException e) {
return true;
}
}
The source code can be found here and here respectively.
Of course, you could also just use them right away instead of hiding them in a boolean utility method.
Well, as far as primitive integer types go, Java doesnt handle Over/Underflow at all (for float and double the behaviour is different, it will flush to +/- infinity just as IEEE-754 mandates).
When adding two int's, you will get no indication when an overflow occurs. A simple method to check for overflow is to use the next bigger type to actually perform the operation and check if the result is still in range for the source type:
public int addWithOverflowCheck(int a, int b) {
// the cast of a is required, to make the + work with long precision,
// if we just added (a + b) the addition would use int precision and
// the result would be cast to long afterwards!
long result = ((long) a) + b;
if (result > Integer.MAX_VALUE) {
throw new RuntimeException("Overflow occured");
} else if (result < Integer.MIN_VALUE) {
throw new RuntimeException("Underflow occured");
}
// at this point we can safely cast back to int, we checked before
// that the value will be withing int's limits
return (int) result;
}
What you would do in place of the throw clauses, depends on your applications requirements (throw, flush to min/max or just log whatever). If you want to detect overflow on long operations, you're out of luck with primitives, use BigInteger instead.
Edit (2014-05-21): Since this question seems to be referred to quite frequently and I had to solve the same problem myself, its quite easy to evaluate the overflow condition by the same method a CPU would calculate its V flag.
Its basically a boolean expression that involves the sign of both operands as well as the result:
/**
* Add two int's with overflow detection (r = s + d)
*/
public static int add(final int s, final int d) throws ArithmeticException {
int r = s + d;
if (((s & d & ~r) | (~s & ~d & r)) < 0)
throw new ArithmeticException("int overflow add(" + s + ", " + d + ")");
return r;
}
In java its simpler to apply the expression (in the if) to the entire 32 bits, and check the result using < 0 (this will effectively test the sign bit). The principle works exactly the same for all integer primitive types, changing all declarations in above method to long makes it work for long.
For smaller types, due to the implicit conversion to int (see the JLS for bitwise operations for details), instead of checking < 0, the check needs to mask the sign bit explicitly (0x8000 for short operands, 0x80 for byte operands, adjust casts and parameter declaration appropiately):
/**
* Subtract two short's with overflow detection (r = d - s)
*/
public static short sub(final short d, final short s) throws ArithmeticException {
int r = d - s;
if ((((~s & d & ~r) | (s & ~d & r)) & 0x8000) != 0)
throw new ArithmeticException("short overflow sub(" + s + ", " + d + ")");
return (short) r;
}
(Note that above example uses the expression need for subtract overflow detection)
So how/why do these boolean expressions work? First, some logical thinking reveals that an overflow can only occur if the signs of both arguments are the same. Because, if one argument is negative and one positive, the result (of add) must be closer to zero, or in the extreme case one argument is zero, the same as the other argument. Since the arguments by themselves can't create an overflow condition, their sum can't create an overflow either.
So what happens if both arguments have the same sign? Lets take a look at the case both are positive: adding two arguments that create a sum larger than the types MAX_VALUE, will always yield a negative value, so an overflow occurs if arg1 + arg2 > MAX_VALUE. Now the maximum value that could result would be MAX_VALUE + MAX_VALUE (the extreme case both arguments are MAX_VALUE). For a byte (example) that would mean 127 + 127 = 254. Looking at the bit representations of all values that can result from adding two positive values, one finds that those that overflow (128 to 254) all have bit 7 set, while all that do not overflow (0 to 127) have bit 7 (topmost, sign) cleared. Thats exactly what the first (right) part of the expression checks:
if (((s & d & ~r) | (~s & ~d & r)) < 0)
(~s & ~d & r) becomes true, only if, both operands (s, d) are positive and the result (r) is negative (the expression works on all 32 bits, but the only bit we're interested in is the topmost (sign) bit, which is checked against by the < 0).
Now if both arguments are negative, their sum can never be closer to zero than any of the arguments, the sum must be closer to minus infinity. The most extreme value we can produce is MIN_VALUE + MIN_VALUE, which (again for byte example) shows that for any in range value (-1 to -128) the sign bit is set, while any possible overflowing value (-129 to -256) has the sign bit cleared. So the sign of the result again reveals the overflow condition. Thats what the left half (s & d & ~r) checks for the case where both arguments (s, d) are negative and a result that is positive. The logic is largely equivalent to the positive case; all bit patterns that can result from adding two negative values will have the sign bit cleared if and only if an underflow occured.
By default, Java's int and long math silently wrap around on overflow and underflow. (Integer operations on other integer types are performed by first promoting the operands to int or long, per JLS 4.2.2.)
As of Java 8, java.lang.Math provides addExact, subtractExact, multiplyExact, incrementExact, decrementExact and negateExact static methods for both int and long arguments that perform the named operation, throwing ArithmeticException on overflow. (There's no divideExact method -- you'll have to check the one special case (MIN_VALUE / -1) yourself.)
As of Java 8, java.lang.Math also provides toIntExact to cast a long to an int, throwing ArithmeticException if the long's value does not fit in an int. This can be useful for e.g. computing the sum of ints using unchecked long math, then using toIntExact to cast to int at the end (but be careful not to let your sum overflow).
If you're still using an older version of Java, Google Guava provides IntMath and LongMath static methods for checked addition, subtraction, multiplication and exponentiation (throwing on overflow). These classes also provide methods to compute factorials and binomial coefficients that return MAX_VALUE on overflow (which is less convenient to check). Guava's primitive utility classes, SignedBytes, UnsignedBytes, Shorts and Ints, provide checkedCast methods for narrowing larger types (throwing IllegalArgumentException on under/overflow, not ArithmeticException), as well as saturatingCast methods that return MIN_VALUE or MAX_VALUE on overflow.
Java doesn't do anything with integer overflow for either int or long primitive types and ignores overflow with positive and negative integers.
This answer first describes the of integer overflow, gives an example of how it can happen, even with intermediate values in expression evaluation, and then gives links to resources that give detailed techniques for preventing and detecting integer overflow.
Integer arithmetic and expressions reslulting in unexpected or undetected overflow are a common programming error. Unexpected or undetected integer overflow is also a well-known exploitable security issue, especially as it affects array, stack and list objects.
Overflow can occur in either a positive or negative direction where the positive or negative value would be beyond the maximum or minimum values for the primitive type in question. Overflow can occur in an intermediate value during expression or operation evaluation and affect the outcome of an expression or operation where the final value would be expected to be within range.
Sometimes negative overflow is mistakenly called underflow. Underflow is what happens when a value would be closer to zero than the representation allows. Underflow occurs in integer arithmetic and is expected. Integer underflow happens when an integer evaluation would be between -1 and 0 or 0 and 1. What would be a fractional result truncates to 0. This is normal and expected with integer arithmetic and not considered an error. However, it can lead to code throwing an exception. One example is an "ArithmeticException: / by zero" exception if the result of integer underflow is used as a divisor in an expression.
Consider the following code:
int bigValue = Integer.MAX_VALUE;
int x = bigValue * 2 / 5;
int y = bigValue / x;
which results in x being assigned 0 and the subsequent evaluation of bigValue / x throws an exception, "ArithmeticException: / by zero" (i.e. divide by zero), instead of y being assigned the value 2.
The expected result for x would be 858,993,458 which is less than the maximum int value of 2,147,483,647. However, the intermediate result from evaluating Integer.MAX_Value * 2, would be 4,294,967,294, which exceeds the maximum int value and is -2 in accordance with 2s complement integer representations. The subsequent evaluation of -2 / 5 evaluates to 0 which gets assigned to x.
Rearranging the expression for computing x to an expression that, when evaluated, divides before multiplying, the following code:
int bigValue = Integer.MAX_VALUE;
int x = bigValue / 5 * 2;
int y = bigValue / x;
results in x being assigned 858,993,458 and y being assigned 2, which is expected.
The intermediate result from bigValue / 5 is 429,496,729 which does not exceed the maximum value for an int. Subsequent evaluation of 429,496,729 * 2 doesn't exceed the maximum value for an int and the expected result gets assigned to x. The evaluation for y then does not divide by zero. The evaluations for x and y work as expected.
Java integer values are stored as and behave in accordance with 2s complement signed integer representations. When a resulting value would be larger or smaller than the maximum or minimum integer values, a 2's complement integer value results instead. In situations not expressly designed to use 2s complement behavior, which is most ordinary integer arithmetic situations, the resulting 2s complement value will cause a programming logic or computation error as was shown in the example above. An excellent Wikipedia article describes 2s compliment binary integers here: Two's complement - Wikipedia
There are techniques for avoiding unintentional integer overflow. Techinques may be categorized as using pre-condition testing, upcasting and BigInteger.
Pre-condition testing comprises examining the values going into an arithmetic operation or expression to ensure that an overflow won't occur with those values. Programming and design will need to create testing that ensures input values won't cause overflow and then determine what to do if input values occur that will cause overflow.
Upcasting comprises using a larger primitive type to perform the arithmetic operation or expression and then determining if the resulting value is beyond the maximum or minimum values for an integer. Even with upcasting, it is still possible that the value or some intermediate value in an operation or expression will be beyond the maximum or minimum values for the upcast type and cause overflow, which will also not be detected and will cause unexpected and undesired results. Through analysis or pre-conditions, it may be possible to prevent overflow with upcasting when prevention without upcasting is not possible or practical. If the integers in question are already long primitive types, then upcasting is not possible with primitive types in Java.
The BigInteger technique comprises using BigInteger for the arithmetic operation or expression using library methods that use BigInteger. BigInteger does not overflow. It will use all available memory, if necessary. Its arithmetic methods are normally only slightly less efficient than integer operations. It is still possible that a result using BigInteger may be beyond the maximum or minimum values for an integer, however, overflow will not occur in the arithmetic leading to the result. Programming and design will still need to determine what to do if a BigInteger result is beyond the maximum or minimum values for the desired primitive result type, e.g., int or long.
The Carnegie Mellon Software Engineering Institute's CERT program and Oracle have created a set of standards for secure Java programming. Included in the standards are techniques for preventing and detecting integer overflow. The standard is published as a freely accessible online resource here: The CERT Oracle Secure Coding Standard for Java
The standard's section that describes and contains practical examples of coding techniques for preventing or detecting integer overflow is here: NUM00-J. Detect or prevent integer overflow
Book form and PDF form of The CERT Oracle Secure Coding Standard for Java are also available.
Having just kinda run into this problem myself, here's my solution (for both multiplication and addition):
static boolean wouldOverflowOccurwhenMultiplying(int a, int b) {
// If either a or b are Integer.MIN_VALUE, then multiplying by anything other than 0 or 1 will result in overflow
if (a == 0 || b == 0) {
return false;
} else if (a > 0 && b > 0) { // both positive, non zero
return a > Integer.MAX_VALUE / b;
} else if (b < 0 && a < 0) { // both negative, non zero
return a < Integer.MAX_VALUE / b;
} else { // exactly one of a,b is negative and one is positive, neither are zero
if (b > 0) { // this last if statements protects against Integer.MIN_VALUE / -1, which in itself causes overflow.
return a < Integer.MIN_VALUE / b;
} else { // a > 0
return b < Integer.MIN_VALUE / a;
}
}
}
boolean wouldOverflowOccurWhenAdding(int a, int b) {
if (a > 0 && b > 0) {
return a > Integer.MAX_VALUE - b;
} else if (a < 0 && b < 0) {
return a < Integer.MIN_VALUE - b;
}
return false;
}
feel free to correct if wrong or if can be simplified. I've done some testing with the multiplication method, mostly edge cases, but it could still be wrong.
There are libraries that provide safe arithmetic operations, which check integer overflow/underflow . For example, Guava's IntMath.checkedAdd(int a, int b) returns the sum of a and b, provided it does not overflow, and throws ArithmeticException if a + b overflows in signed int arithmetic.
It wraps around.
e.g:
public class Test {
public static void main(String[] args) {
int i = Integer.MAX_VALUE;
int j = Integer.MIN_VALUE;
System.out.println(i+1);
System.out.println(j-1);
}
}
prints
-2147483648
2147483647
Since java8 the java.lang.Math package has methods like addExact() and multiplyExact() which will throw an ArithmeticException when an overflow occurs.
I think you should use something like this and it is called Upcasting:
public int multiplyBy2(int x) throws ArithmeticException {
long result = 2 * (long) x;
if (result > Integer.MAX_VALUE || result < Integer.MIN_VALUE){
throw new ArithmeticException("Integer overflow");
}
return (int) result;
}
You can read further here:
Detect or prevent integer overflow
It is quite reliable source.
It doesn't do anything -- the under/overflow just happens.
A "-1" that is the result of a computation that overflowed is no different from the "-1" that resulted from any other information. So you can't tell via some status or by inspecting just a value whether it's overflowed.
But you can be smart about your computations in order to avoid overflow, if it matters, or at least know when it will happen. What's your situation?
static final int safeAdd(int left, int right)
throws ArithmeticException {
if (right > 0 ? left > Integer.MAX_VALUE - right
: left < Integer.MIN_VALUE - right) {
throw new ArithmeticException("Integer overflow");
}
return left + right;
}
static final int safeSubtract(int left, int right)
throws ArithmeticException {
if (right > 0 ? left < Integer.MIN_VALUE + right
: left > Integer.MAX_VALUE + right) {
throw new ArithmeticException("Integer overflow");
}
return left - right;
}
static final int safeMultiply(int left, int right)
throws ArithmeticException {
if (right > 0 ? left > Integer.MAX_VALUE/right
|| left < Integer.MIN_VALUE/right
: (right < -1 ? left > Integer.MIN_VALUE/right
|| left < Integer.MAX_VALUE/right
: right == -1
&& left == Integer.MIN_VALUE) ) {
throw new ArithmeticException("Integer overflow");
}
return left * right;
}
static final int safeDivide(int left, int right)
throws ArithmeticException {
if ((left == Integer.MIN_VALUE) && (right == -1)) {
throw new ArithmeticException("Integer overflow");
}
return left / right;
}
static final int safeNegate(int a) throws ArithmeticException {
if (a == Integer.MIN_VALUE) {
throw new ArithmeticException("Integer overflow");
}
return -a;
}
static final int safeAbs(int a) throws ArithmeticException {
if (a == Integer.MIN_VALUE) {
throw new ArithmeticException("Integer overflow");
}
return Math.abs(a);
}
There is one case, that is not mentioned above:
int res = 1;
while (res != 0) {
res *= 2;
}
System.out.println(res);
will produce:
0
This case was discussed here:
Integer overflow produces Zero.
I think this should be fine.
static boolean addWillOverFlow(int a, int b) {
return (Integer.signum(a) == Integer.signum(b)) &&
(Integer.signum(a) != Integer.signum(a+b));
}
So this the line with the precision error fault;
A[i]= m % 3;
m is long
A is int[];
And my error is
error: possible loss of precision
A[i]= m % 3.
required int
found long.
How can I have error when the only potential answers are 0,1,2?
Isn't there another way than declaring A as long[]?
It's a potentially big array so I don't want that (in fact I would even prefer for A to be short[])
Also I tried error: A[i]= m % 3L , but same result.
The compiler doesn't look at the result, it looks at the type. The type of m%3 is long, and you are trying to put it into an int.
So, the compiler is angry, because potentially, the value stored in a longis bigger than the one you can store into an int.
In order to remove the problem, you have to cast the result back into an int:
A[i] = (int) (m % 3);
However, you can do this because you know the result is 0,1 or 2. If you do not know the value of the long you are casting, you may have an integer overflow:
public static void main(String[] args) {
long l = Integer.MAX_VALUE + 1L;
System.out.println(l);
// 2147483648
System.out.println((int)l);
// -2147483648
}
Java 8 gave us Math.addExact() for integers but not decimals.
Is it possible for double and BigDecimal to overflow? Judging by Double.MAX_VALUE and How to get biggest BigDecimal value I'd say the answer is yes.
As such, why don't we have Math.addExact() for those types as well? What's the most maintainable way to check this ourselves?
double overflows to Infinity and -Infinity, it doesn't wrap around. BigDecimal doesn't overflow, period, it is only limited by the amount of memory in your computer. See: How to get biggest BigDecimal value
The only difference between + and .addExact is that it attempts to detect if overflow has occurred and throws an Exception instead of wraps. Here's the source code:
public static int addExact(int x, int y) {
int r = x + y;
// HD 2-12 Overflow iff both arguments have the opposite sign of the result
if (((x ^ r) & (y ^ r)) < 0) {
throw new ArithmeticException("integer overflow");
}
return r;
}
If you want to check that an overflow has occurred, in one sense it's simpler to do it with double anyway because you can simply check for Double.POSITIVE_INFINITY or Double.NEGATIVE_INFINITY; in the case of int and long, it's a slightly more complicated matter because it isn't always one fixed value, but in another, these could be inputs (e.g. Infinity + 10 = Infinity and you probably don't want to throw an exception in this case).
For all these reasons (and we haven't even mentioned NaN yet), this is probably why such an addExact method doesn't exist in the JDK. Of course, you can always add your own implementation to a utility class in your own application.
The reason you do not need a addExact function for floating point digits is because instead of wrapping around, it overflows to Double.Infinity.
Consequently you can very easily check at the end of the operation whether it overflowed or not. Since Double.POSITIVE_INFINITY + Double.NEGATIVE_INFINITY is NaN you also have to check for NaN in case of more complicated expressions.
This is not only faster but also easier to read. Instead of having Math.addExact(Math.addExact(x, y), z) to add 3 doubles together, you can instead write:
double result = x + y + z;
if (Double.isInfinite(result) || Double.isNan(result)) throw ArithmeticException("overflow");
BigDecimal on the other hand will indeed overflow and throw a corresponding exception in that case as well - this is very unlikely to ever happen in practice though.
For double, please check the other answers.
BigDecimal has the addExact() protection already built in. Many arithmetic operation methods (e.g. multiply) of BigDecimal contain a check on the scale of the result:
private int checkScale(long val) {
int asInt = (int)val;
if (asInt != val) {
asInt = val>Integer.MAX_VALUE ? Integer.MAX_VALUE : Integer.MIN_VALUE;
BigInteger b;
if (intCompact != 0 &&
((b = intVal) == null || b.signum() != 0))
throw new ArithmeticException(asInt>0 ? "Underflow":"Overflow");
}
return asInt;
}
I need do to some input validation but run into a question and I do not seem to find an answer (even with Google). The problem is simple: I have 2 positive integers on the input, and I need to check if their product fits int type in Java.
One of my attempts was to compare product with Integer.MAX_VALUE, but it seems if the product is too big for integer, value becomes negative.
I wanted to reason that product is too big by change in sign, but it seems if the product is "way too big" it will become positive again.
Could someone advise me how to detect if number becomes too big?
Many thanks in advance!
If you are doing a UI, you are presumably in no particular hurry. So you could use a BigInteger and then test the product against MAX_VALUE.
Cast the value to int and see if the value is the same. A simple check looks like
double d =
long l =
BigInteger bi =
if (d == (int) d) // can be represented as an int.
if (l == (int) l) // can be represented as an int.
int i = bi.intValue();
if (bi.equals(BigInteger.valueOf(i)))
If the value is the same when cast back, there is no loss of information and you can use an int value.
Searched and found the following:
Java is cavalier about overflow. There are no compile-time warnings or run-time exceptions to let you know when your calculations have become too big to store back in an int or long. There is no warning for float or double overflow either.
/**
* multiplies the two parameters, throwing a MyOverflowException if the result is not an int.
* #param a multiplier
* #param b multiplicand
* #result product
*/
public static int multSafe(int a, int b) throws MyOverflowException
{
long result = (long)a * (long)b;
int desiredhibits = - ((int)( result >>> 31 ) & 1);
int actualhibits = (int)( result >>> 32 );
if ( desiredhibits == actualhibits )
{
return(int)result;
}
else
{
throw new MyOverflowException( a + " * " + b + " = " + result );
}
}
You could create a BigInteger from your input value and use its intValue() method to convert. If the BigInteger is too big to fit in an int, only the low-order 32 bits are returned. So you need to compare the resulting value to your input value to ensure it was not truncated.