Develop Reference

Application in Tomcat is not responding

We are trying to access an application from the tomcat which is on a different host, but it is not loading even though the tomcat is running. It was running fine for the past 3 months. We restarted the tomcat now it is working fine.
But, we could not able to zero in on what happened.
Any idea how to trace / what might have caused this?
The CPU usage was normal and the tomcat memory was 1205640.
the memory setting of tomcat are 1024- 2048(min-max)
We are using tomcat 7.
Help much appreciated....thanks in advance.....cheers!!

...also - not sure on Windows - you may be running out of file descriptors. This typically happens when streams are not properly closed in finally blocks.
In addition, check with netstat if you have a lot of sockets remaining open or accumulating in wait state.
Less likely, the application is creating threads and never releasing them.
The application is leaking something (memory, file descriptors, sockets, threads,...) and running over a limit.
There are different ways to track this. A profiler may help or more simply, running JVM dumps at regular intervals and checking what is accumulating. The excellent MAT will help you analyze the dumps.

Memory leak problems are not uncommon. If your Tomcat instance was running for three months and suddenly the contained application became unresponsive maybe that was the case. One solution (and if your resources allow you to do so) could be monitoring that Tomcat instance though JMX using jconsole to see how it behaves

Tomcat dies suddenly

Trying to diagnose some bizarre Tomcat (7.0.21) and/or JVM errors on a 64-bit linux (CentOS) machine.
I'm load testing our server application and tried hitting it with 100K messages. Launched jvisualvm and kept my eye on the heap the whole time. Everything was looking great* (see below) until I got to about 93K processed messages and then Tomcat just died. Ran a ps on Tomcat's PID number to confirm it was dead.
Up until this crash:
Load test had been running for about 90 minutes; should have finished shortly thereafter since we were at 93K/100K)
CPU was holding strong around 45%
Used heap was around 2GB (plus or minus a bunch after GCs) but heap size grew from 4GB to MAX_HEAP after about 30 minutes
Class loading/unloading was cycling normally
Thread dumps were normal
Nowhere in the server code are any calls to System.exit() - so we can rule that right out (and yes I've double-checked!!!).
I'm not sure if this is Tomcat crashing or the JVM (how do I tell?). And even if I did know, I can't seem to find any indication of what went wrong:
All of the server app's logs just stop without any ERROR messages (even though we have logging universally set to DEBUG and higher)
Tomcat's catalina.out and respect localhost_access_* files just stop without any info
I've heard it is possible to have Tomcat log a coredump when it does but not sure how to do that and online examples aren't helping much.
How would SO go about diagnosing this? What steps should I take to start ruling out all of the possible factors?
Thanks in advance!

If the JVM crashes, you should have a hs_err_pidNNN.log file; you don't have to do anything to enable this. Its location depends on your OS and how you are running Tomcat. On Windows, they can show up on your desktop, unless you are running as a service. Otherwise, they should be in the current working directory of the crashed process.
Your operating system probably provides additional tools for process monitoring; you could describe your environment more, or perhaps ask at serverfault.com.
It's also possible that jvisualvm is actually causing the crash.
I'd try reproducing the problem, and progressively simplify the scenario to help isolate the cause.

Another possibility is that the OS is running out of memory and the OOM Killer is killing your process. In this case, the JVM wouldn't get an opportunity to write a heap dump, or an hs_err_pid file.

You can use the option java -XX:+HeapDumpOnOutOfMemoryError to create a heap dump for jvm crash due to out of memory error.
More details here Using HeapDumpOnOutOfMemoryError parameter for heap dump for JBoss.

Sorry I had to remove the green check from #erickson. I finally figured out what was killing Tomcat.
It looks like a profiler plugin is not configured correctly with VisualVM and attempting to run a profile on the Tomcat process killed it.
Investigating why right now, and will update this answer once I know more.

Out of Memory on Tomcat Shutdown

Short description of my problem: I start up Tomcat with my deployed Wicket application. When I want to shut down tomcat I get this error message:
Error occurred during initialization of VM
java.lang.OutOfMemoryError: unable to create new native thread
at java.lang.Thread.start0(Native Method)
at java.lang.Thread.start(Thread.java:640)
at java.lang.ref.Reference.<clinit>(Reference.java:145)
I am running the following setup:
Ubuntu Linux: 10.04 (lucid) with a 2.6.18-028stab094.3 kernel
Java Version: "1.6.0_26" Java HotSpot(TM) 64-Bit Server VM
Tomcat Version: 7.0.23
jvm_args: -Xms512m -Xmx512m -XX:MaxPermSize=205m (these are added via CATALINA_OPTS, nothing else)
Wicket 1.5.1
Tomcat is configured with two virtual hosts on subdomains with ModProxy
My application is deployed as ROOT.war in the appbase directory (it makes no difference if I deploy one or both applications)
'''No application deployed does not result in OOM on shutdown''', unless I mess around with the jvm args
The size of the war is about 500k, all libraries are deployed in tomcat/common/lib (directory which I added to common.loader in conf/catalina.properties)
ulimit -u -> unlimited
When I check the Tomcat manager app it says the following about the JVM memory:
Free memory: 470.70 MB Total memory: 490.68 MB Max memory: 490.68 MB
(http connector) Max threads: 200 Current thread count: 6 Current thread busy: 1
'top' or 'free -m' is similar:
Mem: 2097152k total, 1326772k used, 770380k free, 0k buffers
20029 myuser 18 0 805m 240m 11m S 0 11.7 0:19.24 java
I tried to start jmap to get a dump of the heap, it also fails with an OutOfMemoryError. Actually as long as one or both of my applications are deployed any other java process fails with the same OOM Error (see top).
The problem occurs while the application is deployed. So something is seriously wrong with it. However the application is actually running smoothly for quite a while. But I have seen OOMs in the application as well, so I don't trust the calm.
My application is using a custom filter class? Could that be it?
For completeness (hopefully), here's the list of libraries in my common/lib:
activation-1.1.jar
antlr-2.7.6.jar
antlr-runtime-3.3.jar
asm-3.1.jar
asm-commons-3.1.jar
asm-tree-3.1.jar
c3p0-0.9.1.1.jar
commons-collections-3.1.jar
commons-email-1.2.jar
dependencies-provided.tgz
dom4j-1.6.1.jar
ejb3-persistence-1.0.2.GA.jar
geronimo-annotation_1.0_spec-1.1.1.jar
geronimo-jaspic_1.0_spec-1.0.jar
geronimo-jta_1.1_spec-1.1.1.jar
hibernate-annotations-3.4.0.GA.jar
hibernate-commons-annotations-3.1.0.GA.jar
hibernate-core-3.3.0.SP1.jar
hibernate-entitymanager-3.4.0.GA.jar
hibernate-search-3.1.0.GA.jar
javassist-3.4.GA.jar
joda-time-1.6.2.jar
jta-1.1.jar
log4j-1.2.16.jar
lombok-0.9.3.jar
lucene-core-2.4.0.jar
mail-1.4.1.jar
mysql-connector-java-5.1.14.jar
persistence-api-1.0.jar
quartz-2.1.1.jar
servlet-api-2.5.jar
slf4j-api-1.6.1.jar
slf4j-log4j12-1.6.1.jar
stringtemplate-4.0.2.jar
wicket-auth-roles-1.5.1.jar
wicket-core-1.5.1.jar
wicket-datetime-1.5.1.jar
wicket-extensions-1.5.1.jar
wicket-request-1.5.1.jar
wicket-util-1.5.1.jar
xml-apis-1.0.b2.jar
I appreciate any hint or even speculation that gives me additional ideas what to try.
Update: I tested some more and found that this behaviour only occurs while one or both of my applications are deployed. The behaviour does not occur on "empty" tomcat (that was a mistake on my part messing with jvm args)
Update2: I am currently experimenting trying to reproduce this behaviour in a virtual box, I want to debug this with a profiler. I am still not convinved that it should be impossible to run my setup on 2GB RAM.
Update3 (10/01/12): I am trying to run jenkins instead of my own application. Same behaviour, so it is definitely server configuration issues. Jenkins jobs fail when maven is called, so I need not even try the shutdown hack suggested below because I need a second java process while running Jenkins. It was suggested to me that because this is a Virtual Server ulimits may be imposed from outside and I would not be able to see them. I think I'll ask a new question regarding this. Thx all.
Update4 (02/05/12): see below for the answer that contains the hint. I'll clarify some more up here: I am now 95% sure that the errors occur because I am reaching my thread limit. However because this is a virtual server the method described below would not work to check this value because it is not visible with ulimit, that was what was confusing me and only today I found out that this is the "numproc" value that I can see in the Parallels Power Panel that I can log into for my virtual server. There were Resource Alerts for numproc but I did not see those either until just now. The value has a hard limit of 96 which I cannot change of course. The current value of numproc corresponds to the number of processes I see with "top" after toggling "H" to see threads. I had a very hard time finding this because this numproc value is hidden deep inside the panel. Sadly 96 is a rather low number if you want to run a tomcat with apache and mysql. I am also very sad that I cannot even find this value in the small print of my hosting contract and it is rather relevant to my application I dare say. So I guess I'll need a server upgrade.
Thanks all for your helpful answers in the end everyone helped me a bit to find out what the problem was.

The tomcat shutdown procedure consits of sending an command/word via a tcp port to the running tomcat VM. This port is configured in the server.xml (if I remember corretly, writting on my phone right now). So far so good.
Unfortunately, the shutdown script does this by starting a 2. VM using the same java options used for the tomcat. Your system simply has not enough memory for this.
As a sollution you could write your own stop script using telnet or something.
I could help with later if needed.
Hope that helps.
Viele grüsse Bert

Seems you have too many threads open.
Use this command :
ulimit -u
What is the result ?
Should be something like :
max user processes (-u) 100
If this is correct, you can edit this file :
/etc/security/limits.conf
and the the following modifications :
#<domain> <type> <item> <value>
user soft nproc 10000
user hard nproc 10000

You can probably survive for a while like this. All you need to do is kill the tomcat process whenever you need to restart it. It is not a nice approach, but the main concern is that your application runs correctly.
It seems to me though, that on the long run, you might need to order a hosting plan with more RAM available.

I was having a similar problem with a tomcat installation just last week. I managed to fix it by giving tomcat a smaller heap. Something like this:
export CATALINA_OPTS=”-Xms256m -Xmx512m”
Before starting Tomcat may help. In the meantime you'll have to kill it the old fashioned way, with a kill -9 ;)
EDIT: you could also take look here, it appears tomcat automatically creates a bunch of "spare" threads, but you can limit those as well as your max thread count in the config. Hope it helps.

Weblogic administration console way too slow

I've installed weblogic 10.3.3, configured simple domain with default configuration. And after starting weblogic I cannot use it via admin console because it is starting too slow (~10 mins). It seems that admin console application is being deployed incorrectly. Even when I enable 'staging' mode in AdminConsole deployment options, it does not help. Does anybody have a solution for this problem? It really bugs me out.
Configuration properties:
Server: Dell PowerEdge r410 server (Six-core Intel® Xeon® x64 CPU, 8GB RAM)
OS: Ubuntu Maverick 10.10 x86_64
Weblogic: 10.3.3 x64 (used wls1033_generic.jar file for installation)
Java: 1.6.0_17_i586 (tried with different jdk's including x64, but it does not work either)

Turns out weblogic uses random number generator during startup. Because of the bug in java it reads random bits from /dev/random. There are almost no problems with /dev/random except that it is extremely slow. It takes sometimes 10 minutes or more to generate one number. Simple solution exists – using /dev/urandom instead. It is not that good as /dev/random, but at least it is instant.
Java somehow maps /dev/urandom file to /dev/random. That’s why default settings in $JAVA_HOME/jre/lib/security/java.security are useless, they just do not make any sense.
Problem fix is very simple – adding string export JAVA_OPTIONS="-Djava.security.egd=file:/dev/./urandom" to the /etc/bash.bashrc file. Usage of /dev/./urandom instead of simple /dev/urandom is another hack. JVM does not understand the option value otherwise.
Be aware of this problem if you try to setup weblogic under UNIX-based OS.

Without looking at the startup logs we could only speculate. Weblogic typically is a beast. It typically takes anywhere fromo 6-8 minutes to start up for me on my development machines, but that seems like a nice server for it to take 10 minutes for you.

The Admin Console should not be this slow, nor should it take 6-8 minute to start a server or deploy the Admin Console. The deployment of the admin console on my machine takes less than 30 seconds, and startup is under 60 seconds. Startup time for WebLogic is a common complaint, but chances are that something is misconfigured if there is a very long startup or admin console deployment time.

Jstack and Not enough storage is available to process this command

I'm trying to run jstack command on my java application. Application is rather big, running inside jboss AS occupying about 4gb of memory. OS is Windows Server 2003 Standard edition. Every time i get an error "Not enough storage is available to process this command". There is enough ram, 16gb, and disk space. So, any ideas?

I ran into this recently on Win2008r2 and thought I'd share my solution since it took a while to figure out. Rob's comment about psexec -s is what did it for me.
It appears that on Vista and later jstack doesn't work against services because of the user context. It has nothing to do with memory. I suspect this is the same reason people have seen this problem on 2003 via remote desktop, unless you use the /admin or /console switch on mstsc. As of Vista the tightened security is probably what broke it.
Starting my app from a cmd window worked fine, but that doesn't help me debug our standard install. Enabling the java debug port (for VisualVM, Eclipse or most any Java debugger) requires an app restart, so you lose the state you're probably trying to capture if you don't already have debugging enabled. Starting the service under my user credentials did not work - I was a little surprised at that. But psexec -s runs jstack from the system context, which worked like a charm. Oh, and you'll need to run psexec from an elevated cmd prompt, if UAC is on.

In the past I have seen this when the JVM is running as a Windows Service on Windows 2003.
First, check to see if this is an issue with the TMP directory.
Second, jstack (or the other utilities like jconsole) will not connect to the local process unless it is running in the same session. If the service is running as a specific user, you may be able to connect by logging into the same session. If you are using Remote Desktop, you can connect using "mstsc /admin" (used to be /console) and try to run jstack again. Definitely check to make sure the TMP directory is set properly if this doesn't fix the problem.
If the service is running as LocalSystem, the above procedure probably will not help much. I don't know if there is a way to log into the same session as LocalSystem.
Some other alternatives may be to set the process up for remote monitoring and use jvisualvm (from the server itself or another machine) to connect over a port and do a thread dump.

We had problems running JStack on a Windows machine with even a modest application (1GB). We ended up doing our stack and heap analysis using Netbeans. This seemed to cope with the parsing of dump files a lot better. YMMV.
Give Netbeans a try for profiling - its very good. Note that VisualVM is a cutdown NB profiler and comes with 6u7.

psexec -s jstack PID >> c:\jstack.log perfectly works on the same machine. For the first time it took some time but again I executed with the redirect to file option, it completed with in few seconds.

This is an error message from the underlying O/S. There's not much you can do in your code to deal with this other than catch the exception which is thrown. Boo to Windows for being so limited.
http://technet.microsoft.com/en-us/library/cc978735.aspx