Develop Reference

Keras Neural Network output different than Java TensorFlowInferenceInterface output

I have created a neural network in Keras using the InceptionV3 pretrained model:
base_model = applications.inception_v3.InceptionV3(weights='imagenet', include_top=False)
# add a global spatial average pooling layer
x = base_model.output
x = GlobalAveragePooling2D()(x)
# let's add a fully-connected layer
x = Dense(2048, activation='relu')(x)
x = Dropout(0.5)(x)
predictions = Dense(len(labels_list), activation='sigmoid')(x)
I trained the model successfully and want to following image: https://imgur.com/a/hoNjDfR. Therefore, the image is cropped to 299x299 and normalized (just devided by 255):
def img_to_array(img, data_format='channels_last', dtype='float32'):
if data_format not in {'channels_first', 'channels_last'}:
raise ValueError('Unknown data_format: %s' % data_format)
# Numpy array x has format (height, width, channel)
# or (channel, height, width)
# but original PIL image has format (width, height, channel)
x = np.asarray(img, dtype=dtype)
if len(x.shape) == 3:
if data_format == 'channels_first':
x = x.transpose(2, 0, 1)
elif len(x.shape) == 2:
if data_format == 'channels_first':
x = x.reshape((1, x.shape[0], x.shape[1]))
else:
x = x.reshape((x.shape[0], x.shape[1], 1))
else:
raise ValueError('Unsupported image shape: %s' % (x.shape,))
return x
def load_image_as_array(path):
if pil_image is not None:
_PIL_INTERPOLATION_METHODS = {
'nearest': pil_image.NEAREST,
'bilinear': pil_image.BILINEAR,
'bicubic': pil_image.BICUBIC,
}
# These methods were only introduced in version 3.4.0 (2016).
if hasattr(pil_image, 'HAMMING'):
_PIL_INTERPOLATION_METHODS['hamming'] = pil_image.HAMMING
if hasattr(pil_image, 'BOX'):
_PIL_INTERPOLATION_METHODS['box'] = pil_image.BOX
# This method is new in version 1.1.3 (2013).
if hasattr(pil_image, 'LANCZOS'):
_PIL_INTERPOLATION_METHODS['lanczos'] = pil_image.LANCZOS
with open(path, 'rb') as f:
img = pil_image.open(io.BytesIO(f.read()))
width_height_tuple = (IMG_HEIGHT, IMG_WIDTH)
resample = _PIL_INTERPOLATION_METHODS['nearest']
img = img.resize(width_height_tuple, resample)
return img_to_array(img, data_format=K.image_data_format())
img_array = load_image_as_array('https://imgur.com/a/hoNjDfR')
img_array = img_array/255
Then I predict it with the trained model in Keras:
predict(img_array.reshape(1,img_array.shape[0],img_array.shape[1],img_array.shape[2]))
The result is the following:
array([[0.02083278, 0.00425783, 0.8858412 , 0.17453966, 0.2628744 ,
0.00428194, 0.2307986 , 0.01038828, 0.07561868, 0.00983179,
0.09568241, 0.03087404, 0.00751176, 0.00651798, 0.03731382,
0.02220723, 0.0187968 , 0.02018479, 0.3416505 , 0.00586909,
0.02030778, 0.01660049, 0.00960067, 0.02457979, 0.9711478 ,
0.00666443, 0.01468313, 0.0035468 , 0.00694743, 0.03057212,
0.00429407, 0.01556832, 0.03173089, 0.01407397, 0.35166138,
0.00734553, 0.0508953 , 0.00336689, 0.0169737 , 0.07512951,
0.00484502, 0.01656419, 0.01643038, 0.02031735, 0.8343202 ,
0.02500874, 0.02459189, 0.01325032, 0.00414564, 0.08371573,
0.00484318]], dtype=float32)
The important point is that it has four values with a value greater than 0.8:
>>> y[y>=0.8]
array([0.9100583 , 0.96635956, 0.91707945, 0.9711707 ], dtype=float32))
Now I have converted my network to .pb and imported it in an android project. I wanted to predict the same image in android. Therefore I also resize the image and normalize it like I did in Python by using the following code:
// Resize image:
InputStream imageStream = getAssets().open("test3.jpg");
Bitmap bitmap = BitmapFactory.decodeStream(imageStream);
Bitmap resized_image = utils.processBitmap(bitmap,299);
and then normalize by using the following function:
public static float[] normalizeBitmap(Bitmap source,int size){
float[] output = new float[size * size * 3];
int[] intValues = new int[source.getHeight() * source.getWidth()];
source.getPixels(intValues, 0, source.getWidth(), 0, 0, source.getWidth(), source.getHeight());
for (int i = 0; i < intValues.length; ++i) {
final int val = intValues[i];
output[i * 3] = Color.blue(val) / 255.0f;
output[i * 3 + 1] = Color.green(val) / 255.0f;
output[i * 3 + 2] = Color.red(val) / 255.0f ;
}
return output;
}
But in java I get other values. None of the four indices has a value greater than 0.8.
The value of the four indices are between 0.1 and 0.4!!!
I have checked my code several times, but I don't understand why in android I don't get the same values for the same image? Any idea or hint?

How to edit image with opencv to read text with OCR

I'm developing an android app to recognize text in particular plate, as in photo here:
I have to recognize the texts in white (e.g. near to "Mod."). I'm using Google ML Kit's text recognition APIs, but it fails. So, I'm using OpenCV to edit image but I don't know how to emphasize the (white) texts so OCR recognize it. I tried more stuff, like contrast, brightness, gamma correction, adaptive thresholding, but the cases vary a lot depending on how the photo is taken. Do you have any ideas?
Thank u very much.

I coded this example in Python (since OpenCV's SIFT in Android is paid) but you can still use this to understand how to solve it.
First I created this image as a template:
Step 1: Load images
""" 1. Load images """
# load image of plate
src_path = "nRHzD.jpg"
src = cv2.imread(src_path)
# load template of plate (to be looked for)
src_template_path = "nRHzD_template.jpg"
src_template = cv2.imread(src_template_path)
Step 2: Find the template using SIFT and perspective transformation
# convert images to gray scale
src_gray = cv2.cvtColor(src, cv2.COLOR_BGR2GRAY)
src_template_gray = cv2.cvtColor(src_template, cv2.COLOR_BGR2GRAY)
# use SIFT to find template
n_matches_min = 10
template_found, homography = find_template(src_gray, src_template_gray, n_matches_min)
warp = transform_perspective_and_crop(homography, src, src_gray, src_template)
warp_gray = cv2.cvtColor(warp, cv2.COLOR_BGR2GRAY)
warp_hsv = cv2.cvtColor(warp, cv2.COLOR_BGR2HSV)
template_hsv = cv2.cvtColor(src_template, cv2.COLOR_BGR2HSV)
Step 3: Find regions of interest (using the green parts of the template image)
green_hsv_lower_bound = [50, 250, 250]
green_hsv_upper_bound = [60, 255, 255]
mask_rois, mask_rois_img = crop_img_in_hsv_range(warp, template_hsv, green_hsv_lower_bound, green_hsv_upper_bound)
roi_list = separate_rois(mask_rois, warp_gray)
# sort the rois by distance to top right corner -> x (value[1]) + y (value[2])
roi_list = sorted(roi_list, key=lambda values: values[1]+values[2])
Step 4: Apply a Canny Edge detection to the rois (regions of interest)
for i, roi in enumerate(roi_list):
roi_img, roi_x_offset, roi_y_offset = roi
print("#roi:{} x:{} y:{}".format(i, roi_x_offset, roi_y_offset))
roi_img_blur_threshold = cv2.Canny(roi_img, 40, 200)
cv2.imshow("ROI image", roi_img_blur_threshold)
cv2.waitKey()
There are many ways for you to detect the digits, one of the easiest approaches is to run a K-Means Clustering on each of the contours.
Full code:
""" This code shows a way of getting the digit's edges in a pre-defined position (in green) """
import cv2
import numpy as np
def find_template(src_gray, src_template_gray, n_matches_min):
# Initiate SIFT detector
sift = cv2.xfeatures2d.SIFT_create()
""" find grid using SIFT """
# find the keypoints and descriptors with SIFT
kp1, des1 = sift.detectAndCompute(src_template_gray, None)
kp2, des2 = sift.detectAndCompute(src_gray, None)
FLANN_INDEX_KDTREE = 0
index_params = dict(algorithm = FLANN_INDEX_KDTREE, trees = 5)
search_params = dict(checks = 50)
flann = cv2.FlannBasedMatcher(index_params, search_params)
matches = flann.knnMatch(des1, des2, k=2)
# store all the good matches as per Lowe's ratio test.
good = []
for m,n in matches:
if m.distance < 0.7*n.distance:
good.append(m)
if len(good) > n_matches_min:
src_pts = np.float32([kp1[m.queryIdx].pt for m in good ]).reshape(-1,1,2)
dst_pts = np.float32([kp2[m.trainIdx].pt for m in good ]).reshape(-1,1,2)
M, mask = cv2.findHomography(src_pts, dst_pts, cv2.RANSAC,5.0)
matchesMask = mask.ravel().tolist()
h_template, w_template = src_template_gray.shape
pts = np.float32([[0, 0], [0, h_template - 1], [w_template - 1, h_template - 1], [w_template - 1,0]]).reshape(-1,1,2)
homography = cv2.perspectiveTransform(pts, M)
else:
print "Not enough matches are found - %d/%d" % (len(good), n_matches_min)
matchesMask = None
# show matches
draw_params = dict(matchColor = (0, 255, 0), # draw matches in green color
singlePointColor = None,
matchesMask = matchesMask, # draw only inliers
flags = 2)
if matchesMask:
src_gray_copy = src_gray.copy()
sift_matches = cv2.polylines(src_gray_copy, [np.int32(homography)], True, 255, 2, cv2.LINE_AA)
sift_matches = cv2.drawMatches(src_template_gray, kp1, src_gray_copy, kp2, good, None, **draw_params)
return sift_matches, homography
def transform_perspective_and_crop(homography, src, src_gray, src_template_gray):
""" get mask and contour of template """
mask_img_template = np.zeros(src_gray.shape, dtype=np.uint8)
mask_img_template = cv2.polylines(mask_img_template, [np.int32(homography)], True, 255, 1, cv2.LINE_AA)
_ret, contours, hierarchy = cv2.findContours(mask_img_template, cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_SIMPLE)
template_contour = None
# approximate the contour
c = contours[0]
peri = cv2.arcLength(c, True)
approx = cv2.approxPolyDP(c, 0.02 * peri, True)
# if our approximated contour has four points, then
# we can assume that we have found our template
warp = None
if len(approx) == 4:
template_contour = approx
cv2.drawContours(mask_img_template, [template_contour] , -1, (255,0,0), -1)
""" Transform perspective """
# now that we have our template contour, we need to determine
# the top-left, top-right, bottom-right, and bottom-left
# points so that we can later warp the image -- we'll start
# by reshaping our contour to be our finals and initializing
# our output rectangle in top-left, top-right, bottom-right,
# and bottom-left order
pts = template_contour.reshape(4, 2)
rect = np.zeros((4, 2), dtype = "float32")
# the top-left point has the smallest sum whereas the
# bottom-right has the largest sum
s = pts.sum(axis = 1)
rect[0] = pts[np.argmin(s)]
rect[2] = pts[np.argmax(s)]
# compute the difference between the points -- the top-right
# will have the minumum difference and the bottom-left will
# have the maximum difference
diff = np.diff(pts, axis = 1)
rect[1] = pts[np.argmin(diff)]
rect[3] = pts[np.argmax(diff)]
# now that we have our rectangle of points, let's compute
# the width of our new image
(tl, tr, br, bl) = rect
widthA = np.sqrt(((br[0] - bl[0]) ** 2) + ((br[1] - bl[1]) ** 2))
widthB = np.sqrt(((tr[0] - tl[0]) ** 2) + ((tr[1] - tl[1]) ** 2))
# ...and now for the height of our new image
heightA = np.sqrt(((tr[0] - br[0]) ** 2) + ((tr[1] - br[1]) ** 2))
heightB = np.sqrt(((tl[0] - bl[0]) ** 2) + ((tl[1] - bl[1]) ** 2))
# take the maximum of the width and height values to reach
# our final dimensions
maxWidth = max(int(widthA), int(widthB))
maxHeight = max(int(heightA), int(heightB))
# construct our destination points which will be used to
# map the screen to a top-down, "birds eye" view
homography = np.array([
[0, 0],
[maxWidth - 1, 0],
[maxWidth - 1, maxHeight - 1],
[0, maxHeight - 1]], dtype = "float32")
# calculate the perspective transform matrix and warp
# the perspective to grab the screen
M = cv2.getPerspectiveTransform(rect, homography)
warp = cv2.warpPerspective(src, M, (maxWidth, maxHeight))
# resize warp
h_template, w_template, _n_channels = src_template_gray.shape
warp = cv2.resize(warp, (w_template, h_template), interpolation=cv2.INTER_AREA)
return warp
def crop_img_in_hsv_range(img, hsv, lower_bound, upper_bound):
mask = cv2.inRange(hsv, np.array(lower_bound), np.array(upper_bound))
# do an MORPH_OPEN (erosion followed by dilation) to remove isolated pixels
kernel = np.ones((5,5), np.uint8)
mask = cv2.morphologyEx(mask, cv2.MORPH_OPEN, kernel)
# Bitwise-AND mask and original image
res = cv2.bitwise_and(img, img, mask=mask)
return mask, res
def separate_rois(column_mask, img_gray):
# go through each of the boxes
# https://stackoverflow.com/questions/41592039/contouring-a-binary-mask-with-opencv-python
border = cv2.copyMakeBorder(column_mask, 1, 1, 1, 1, cv2.BORDER_CONSTANT, value=0)
_, contours, hierarchy = cv2.findContours(border, cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_NONE, offset=(-1, -1))
cell_list = []
for contour in contours:
cell_mask = np.zeros_like(img_gray) # Create mask where white is what we want, black otherwise
cv2.drawContours(cell_mask, [contour], -1, 255, -1) # Draw filled contour in mask
# turn that mask into a rectangle
(x,y,w,h) = cv2.boundingRect(contour)
#print("x:{} y:{} w:{} h:{}".format(x, y, w, h))
cv2.rectangle(cell_mask, (x, y), (x+w, y+h), 255, -1)
# copy the img_gray using that mask
img_tmp_region = cv2.bitwise_and(img_gray, img_gray, mask= cell_mask)
# Now crop
(y, x) = np.where(cell_mask == 255)
(top_y, top_x) = (np.min(y), np.min(x))
(bottom_y, bottom_x) = (np.max(y), np.max(x))
img_tmp_region = img_tmp_region[top_y:bottom_y+1, top_x:bottom_x+1]
cell_list.append([img_tmp_region, top_x, top_y])
return cell_list
""" 1. Load images """
# load image of plate
src_path = "nRHzD.jpg"
src = cv2.imread(src_path)
# load template of plate (to be looked for)
src_template_path = "nRHzD_template.jpg"
src_template = cv2.imread(src_template_path)
""" 2. Find the plate (using the template image) and crop it into a rectangle """
# convert images to gray scale
src_gray = cv2.cvtColor(src, cv2.COLOR_BGR2GRAY)
src_template_gray = cv2.cvtColor(src_template, cv2.COLOR_BGR2GRAY)
# use SIFT to find template
n_matches_min = 10
template_found, homography = find_template(src_gray, src_template_gray, n_matches_min)
warp = transform_perspective_and_crop(homography, src, src_gray, src_template)
warp_gray = cv2.cvtColor(warp, cv2.COLOR_BGR2GRAY)
warp_hsv = cv2.cvtColor(warp, cv2.COLOR_BGR2HSV)
template_hsv = cv2.cvtColor(src_template, cv2.COLOR_BGR2HSV)
""" 3. Find regions of interest (using the green parts of the template image) """
green_hsv_lower_bound = [50, 250, 250]
green_hsv_upper_bound = [60, 255, 255]
mask_rois, mask_rois_img = crop_img_in_hsv_range(warp, template_hsv, green_hsv_lower_bound, green_hsv_upper_bound)
roi_list = separate_rois(mask_rois, warp_gray)
# sort the rois by distance to top right corner -> x (value[1]) + y (value[2])
roi_list = sorted(roi_list, key=lambda values: values[1]+values[2])
""" 4. Apply a Canny Edge detection to the rois (regions of interest) """
for i, roi in enumerate(roi_list):
roi_img, roi_x_offset, roi_y_offset = roi
print("#roi:{} x:{} y:{}".format(i, roi_x_offset, roi_y_offset))
roi_img_blur_threshold = cv2.Canny(roi_img, 40, 200)
cv2.imshow("ROI image", roi_img_blur_threshold)
cv2.waitKey()

Tensorflow in Android: How do i use my linear regression model to predict a value in an android application?

I currently have a ipynb file (ipython notebook) that contains a linear regression code / model(im not entirely sure if it's a model) that I've created earlier.
How do i implement this model in an android application such that if I were to input a value of 'x' in a text box, it'll output in a textview the predicted value of 'y'. Function: Y = mx + b.
I've tried looking at different tutorials, but they were mostly not "step-by-step" guides, which made it really hard to understand, I'm a beginner at coding.
Here's my code for the model:
import tensorflow as tf
import pandas as pd
import numpy as np
import matplotlib.pyplot as plt
%matplotlib inline
rng = np.random
from numpy import genfromtxt
from sklearn.datasets import load_boston
# Parameters
learning_rate = 0.0001
training_epochs = 1000
display_step = 50
n_samples = 222
X = tf.placeholder("float") # create symbolic variables
Y = tf.placeholder("float")
filename_queue = tf.train.string_input_producer(["C://Users//Shiina//battdata.csv"],shuffle=False)
reader = tf.TextLineReader() # skip_header_lines=1 if csv has headers
key, value = reader.read(filename_queue)
# Default values, in case of empty columns. Also specifies the type of the
# decoded result.
record_defaults = [[1.], [1.]]
height, soc= tf.decode_csv(
value, record_defaults=record_defaults)
features = tf.stack([height])
# Set model weights
W = tf.Variable(rng.randn(), name="weight")
b = tf.Variable(rng.randn(), name="bias")
# Construct a linear model
pred_soc = tf.add(tf.multiply(height, W), b) # XW + b <- y = mx + b where W is gradient, b is intercept
# Mean squared error
cost = tf.reduce_sum(tf.pow(pred_soc-soc, 2))/(2*n_samples)
# Gradient descent
optimizer = tf.train.GradientDescentOptimizer(learning_rate).minimize(cost)
# Initializing the variables
init = tf.global_variables_initializer()
with tf.Session() as sess:
# Start populating the filename queue.
coord = tf.train.Coordinator()
threads = tf.train.start_queue_runners(coord=coord)
sess.run(init)
# Fit all training data
for epoch in range(training_epochs):
_, cost_value = sess.run([optimizer,cost])
#Display logs per epoch step
if (epoch+1) % display_step == 0:
c = sess.run(cost)
print( "Epoch:", '%04d' % (epoch+1), "cost=", "{:.9f}".format(c), \
"W=", sess.run(W), "b=", sess.run(b))
print("Optimization Finished!")
training_cost = sess.run(cost)
print ("Training cost=", training_cost, "W=", sess.run(W), "b=", sess.run(b), '\n')
#Plot data after completing training
train_X = []
train_Y = []
for i in range(n_samples): #Your input data size to loop through once
X, Y = sess.run([height, pred_soc]) # Call pred, to get the prediction with the updated weights
train_X.append(X)
train_Y.append(Y)
#Graphic display
plt.plot(train_X, train_Y, 'ro', label='Original data')
plt.ylabel("SoC")
plt.xlabel("Height")
plt.axis([0, 1, 0, 100])
plt.plot(train_X, train_Y, linewidth=2.0)
plt.legend()
plt.show()
coord.request_stop()
coord.join(threads)

OpenCV 2.4 Bilateral filtering

In OpenCV android, is it possible to apply bilateral filtering? I know that I can do gaussian blurring like Imgproc.GaussianBlur(gray, gray, new Size(15,15), 0); but I cannot seem to find the code for bilateral filtering.

Seems it's possible like:
Imgproc.bilateralFilter(mat, dstMat, 10, 50, 0);
from here and here.
Update
This:
E/AndroidRuntime: FATAL EXCEPTION: Thread-1376 Process: PID: 30368 CvException [org.opencv.core.CvException: cv::Exception: /Volumes/build-storage/build/2_4_pack-android/opencv/modules‌​/imgproc/src/smooth.‌​cpp:1925: error: (-215) (src.type() == CV_8UC1 || src.type() == CV_8UC3) && src.type() == dst.type() && src.size() == dst.size() && src.data != dst.data in function void cv::bilateralFilter_8u(const cv::Mat&, cv::Mat&, int, double, double, int)
is because wrong color format of processing Mat. You should convert 4 channels RGBA format to 3 channels RGB for bilateralFilter() apply (like in bilateralFilterTutorial() method here). So, You code should be like that:
// load Mat from somewhere (e.g. from assets)
mSourceImageMat = Utils.loadResource(this, R.drawable.<your_image>);
// convert 4 channel Mat to 3 channel Mat
Imgproc.cvtColor(mSourceImageMat, mSourceImageMat, Imgproc.COLOR_BGRA2BGR);
// create dest Mat
Mat dstMat = mSourceImageMat.clone();
// apply bilateral filter
Imgproc.bilateralFilter(mSourceImageMat, dstMat, 10, 250, 50);
// convert to 4 channels Mat back
Imgproc.cvtColor(dstMat, dstMat, Imgproc.COLOR_RGB2RGBA);
// create result bitmap and convert Mat to it
Bitmap bm = Bitmap.createBitmap(mSourceImageMat.cols(), mSourceImageMat.rows(), Bitmap.Config.ARGB_8888);
Utils.matToBitmap(dstMat, bm);
// show bitmap on ImageView
mImageView.setImageBitmap(bm);

The problem could be, that you use PNG image, which has a 4th channel for transparency. Convert it from 4 channel to 3 channel, before use.
Imgproc.cvtColor(src,dst,Imgproc.COLOR_BGRA2BGR);

OpenCV Java inpaint image format requirement

Been trying to get inpainting to work on Android,
int height = (int) viewMat.size().height;
int width = (int) viewMat.size().width;
Mat maskMat = new Mat();
maskMat.create(viewMat.size(), CvType.CV_8U);
maskMat.setTo(bColor);
Point r1 = new Point(width/2-width/10, height/2-height/10);
Point r2 = new Point(width/2+width/10, height/2+height/10);
Scalar color = new Scalar(1);
Core.rectangle(maskMat, r1, r2, color, Core.FILLED);
outMat.create(viewMat.size(), CvType.CV_8UC3);
viewMat.convertTo(outMat, CvType.CV_8UC3);
Photo.inpaint(outMat, maskMat, outMat, 1, Photo.INPAINT_TELEA);
Was greeted with,
Caused by: CvException [org.opencv.core.CvException: /home/reports/ci/slave_desktop/50-SDK/opencv/modules/photo/src/inpaint.cpp:744:
error: (-210) Only 8-bit 1-channel and 3-channel input/output images are supported in function void cvInpaint(const CvArr*, const CvArr*, CvArr*, double, int)
in logcat.
Been trying for hours creating Mats in various ways but to no valid.
CV_8U = 8 bit per channel, 1 channel. Right?
CV_8UC3 = 8 bit per channel, 3 channels. Right?
So what am I missing? I'm totally stumped.

...
Point r2 = new Point(width/2+width/10, height/2+height/10);
Scalar color = new Scalar(1);
Core.rectangle(maskMat, r1, r2, color, Core.FILLED);
Imgproc.cvtColor(viewMat, outMat, Imgproc.COLOR_RGBA2RGB);
Photo.inpaint(outMat, maskMat, outMat, 1, Photo.INPAINT_TELEA);
...
Turned out it was simply a matter of getting rid of the alpha channel via color conversion.

Image Inpaint Using OpenCv Android Studio
ImgMat = Mat()
Maskmat = Mat()
destmat=Mat()
Utils.bitmapToMat(BitmapImage, ImgMat)
Utils.bitmapToMat(BitmapMask, Maskmat)
Imgproc.cvtColor(ImgMat, ImgMat, Imgproc.COLOR_RGB2XYZ)
Imgproc.cvtColor(Maskmat, Maskmat, Imgproc.COLOR_BGR2GRAY)
Photo.inpaint(ImgMat,Maskmat,destmat, 15.0, INPAINT_NS)
InpaintBitmap= Bitmap.createBitmap(BitmapImage.getWidth(),
BitmapImage.getHeight(),
Bitmap.Config.ARGB_8888)
Imgproc.cvtColor(destmat, destmat, Imgproc.COLOR_XYZ2RGB);
Utils.matToBitmap(destmat, InpaintBitmap)
Description:
InpaintBitmap is an Inpaint color Bitmap
src image is a 3 channel image but mask bitmap is a 1 channel image