I've made the code so it asks the user various questions, and if the input.trim().isEmpty() a message will be given to the user and will ask the user to input again. So if the user just writes blank spaces, message given. If the user gives a few blank spaces and some characters, it will accept.
Problem right now is that I want to capitalize the first letter of the Word, but it doesn't really work. Say if the user's input start with a letter then that will be capitalized. But if there's whitespace it wont capitalize at all.
So if input is:
katka
Output is:
katka
Another example:
katka
Output is:
Katka
Code is:
String askWork = input.nextLine();
String workplace = askWork.trim().substring(0,1).toUpperCase()
+ askWork.substring(1);
while (askWork.trim().isEmpty()){
String askWork = input.nextLine();
String workplace = askWork.trim().substring(0,1).toUpperCase()
+ askWork.substring(1);
}
I've tried different approaches but no success.
The problem is because of whitespace as all the indices you refer while converting to uppercase are not accurate.
So first trim() the String so you can clear all leading and trailing whitespace and then capitalize it.
better check empty string and all whitespace to avoid exception.
String askWork = input.nextLine().trim();
String capitalized = askWork.substring(0, 1).toUpperCase() + askWork.substring(1)
The trim() method on String will clear all leading and trailing whitespace. The trimmed String must become your new String so that all indices you refer to after that are accurate. You will no longer need the replaceAll("\\s",""). You also need logic to test for empty input. You use the isEmpty() method on String for that. I've written a toy main() that keeps asking for a word and then capitalizes and prints it once it gets one. It will test for blank input, input with no characters, etc.
public static void main(String[] args) throws Exception {
BufferedReader input = new BufferedReader(new InputStreamReader(System.in));
String askWork = "";
while (askWork.isEmpty()) {
System.out.println("Enter a word:");
askWork = input.readLine().trim();
}
String workPlace = askWork.substring(0,1).toUpperCase() + askWork.substring(1);
System.out.println(workPlace);
}
Try trimming your input to remove the whitespace, before attempting to capitalize it.
String askWork = input.nextLine().trim();
String capitalized = askWork.substring(0, 1).toUpperCase() + askWork.substring(1)
However, if the input is only whitespace, this will result in an IndexOutOfBoundsException because after trim() is called askWork is set to the empty string ("") and you then try to access the first character of the empty (length 0) string.
String askWork = input.nextLine().trim();
if(askWork.isEmpty()) {
// Display error
JOptionPane.showMessageDialog(null, "Bad!");
else {
String capitalized = askWork.substring(0, 1).toUpperCase() + askWork.substring(1)
JOptionPane.showMessageDialog(null, "It worked! -- " + capitalized);
}
You will need to trim the input before you start manipulating its contents:
String askWork = input.nextLine().trim();
String workplace = askWork.substring(0,1).toUpperCase() + askWork.substring(1);
Another solution without substrings:
public static void main(String[] args) {
Scanner input = new Scanner(System.in);
String askWork = input.nextLine().trim();
while (askWork.isEmpty())
askWork = input.nextLine().trim();
char[] workChars = askWork.toCharArray();
workChars[0] = workChars[0].toUpperCase();
String workplace = String.valueOf(workChars);
// Work with workplace
input.close();
}
I've never been good with regex and I can't seem to get this...
I am trying to match statements along these lines (these are two lines in a text file I'm reading)
Lname Fname 12.35 1
Jones Bananaman 7.1 3
Currently I am using this for a while statement
reader.hasNext("\\w+ \\w+ \\d*\\.\\d{1,2} [0-5]")
But it doesn't enter the while statement.
The program reads the text file just fine when I remove the while.
The code segment is this:
private void initializeFileData(){
try {
Scanner reader = new Scanner(openedPath);
while(reader.hasNext("\\w+ \\w+ \\d*\\.\\d{1,2} [0-5]")){
employeeInfo.add(new EmployeeFile(reader.next(), reader.next(), reader.nextDouble(), reader.nextInt(), new employeeRemove()));
}
for(EmployeeFile element: employeeInfo){
output.add(element);
}
} catch (FileNotFoundException e) {
e.printStackTrace();
}
}
Use the \s character class for the spaces between words:
while(reader.hasNext("\\w+\\s\\w+\\s\\d*\\.\\d{1,2}\\s[0-5]"))
Update:
According to the javadoc for the Scanner class, by default it splits it's tokens using whitespace. You can change the delimiter it uses with the useDelimiter(String pattern) method of Scanner.
private void initializeFileData(){
try {
Scanner reader = new Scanner(openedPath).useDelimiter("\\n");
...
while(reader.hasNext("\\w+\\s\\w+\\s\\d*\\.\\d{1,2}\\s[0-5]")){
...
http://docs.oracle.com/javase/1.5.0/docs/api/java/util/Scanner.html
From what I can see (And correct me if I'm wrong, because regex always seems to trick my brain :p), you're not handling the spaces correctly. You need to use \s, not just the standard ' ' character
EDIT: Sorry, \s. Someone else beat me to it :p
Actually
\w+
is going to catch [Lname, Fname, 12, 35, 1] for Lname Fname 12.35 1. So you can just store reader.nextLine() and then extract all regex matches from there. From there, you can abstract it a bit for instance by :
class EmployeeFile {
.....
public EmployeeFile(String firstName, String lastName,
Double firstDouble, int firstInt,
EmployeeRemove er){
.....
}
public EmployeeFile(String line) {
//TODO : extract all the required info from the string array
// instead of doing it while reading at the same time.
// Keep input parsing separate from input reading.
// Turn this into a string array using the regex pattern
// mentioned above
}
}
I created my own version, without files and the last loop, that goes like that:
private static void initializeFileData() {
String[] testStrings = {"Lname Fname 12.35 1", "Jones Bananaman 7.1 3"};
Pattern myPattern = Pattern.compile("(\\w+)\\s+(\\w+)\\s+(\\d*\\.\\d{1,2})\\s+([0-5])");
for (String s : testStrings) {
Matcher myMatcher = myPattern.matcher(s);
if (myMatcher.groupCount() == 4) {
String lastName = myMatcher.group(1);
String firstName = myMatcher.group(2);
double firstValue = Double.parseDouble(myMatcher.group(3) );
int secondValue = Integer.parseInt(myMatcher.group(4));
//employeeInfo.add(new EmployeeFile(lastName, firstName, firstValue, secondValue, new employeeRemove()));
}
}
}
Notice that I removed the slash before the dot (you want a dot, not any character) and inserted the parenthesis, in order to create the groups.
I hope it helps.
I have a code like,
String str = " " ;
while( cond ) {
str = str + "\n" ;
}
Now, I don't know why at the time of printing, the output string is not printing the newline character. However, when I add any other character like ( str = str + "c"), it is printing properly. Can anybody help me, how to solve this problem and why this happening ?
The newline character is considered a control character, which doesn't print a special character to the screen by default.
As an example, try this:
String str = "Hi";
while (cond) {
str += "\n"; // Syntactically equivalent to your code
}
str += "Bye";
System.out.println(str);
Looks like you are trying to run the above code on Windows. Well the line separator or new line is different on Windows ( '\r\n' ) and Unix flavors ('\n').
So, instead of hard coding and using '\n' as new line. Try getting new line from the system like:
String newLine = System.getProperty("line.separator");
String str = " " ;
while( cond ) {
str = str + newLine ;
}
If you really want \n, to get printed, do it like this.
String first = "C:/Mine/Java" + "\\n";
System.out.println(first);
OUTPUT is as follows :
For a good reference as to why is this happening, visit JAVA Tutorials
As referred in that TUTORIAL : A character preceded by a backslash is an escape sequence, and has a special meaning to the compiler. When an escape sequence is encountered in a print statement, the compiler interprets it accordingly
Hope this might help.
Regards
Based on your sample, the only reason it would not show a new line character is that cond is never true and thus the while loop never runs...
Looking for quick, simple way in Java to change this string
" hello there "
to something that looks like this
"hello there"
where I replace all those multiple spaces with a single space, except I also want the one or more spaces at the beginning of string to be gone.
Something like this gets me partly there
String mytext = " hello there ";
mytext = mytext.replaceAll("( )+", " ");
but not quite.
Try this:
String after = before.trim().replaceAll(" +", " ");
See also
String.trim()
Returns a copy of the string, with leading and trailing whitespace omitted.
regular-expressions.info/Repetition
No trim() regex
It's also possible to do this with just one replaceAll, but this is much less readable than the trim() solution. Nonetheless, it's provided here just to show what regex can do:
String[] tests = {
" x ", // [x]
" 1 2 3 ", // [1 2 3]
"", // []
" ", // []
};
for (String test : tests) {
System.out.format("[%s]%n",
test.replaceAll("^ +| +$|( )+", "$1")
);
}
There are 3 alternates:
^_+ : any sequence of spaces at the beginning of the string
Match and replace with $1, which captures the empty string
_+$ : any sequence of spaces at the end of the string
Match and replace with $1, which captures the empty string
(_)+ : any sequence of spaces that matches none of the above, meaning it's in the middle
Match and replace with $1, which captures a single space
See also
regular-expressions.info/Anchors
You just need a:
replaceAll("\\s{2,}", " ").trim();
where you match one or more spaces and replace them with a single space and then trim whitespaces at the beginning and end (you could actually invert by first trimming and then matching to make the regex quicker as someone pointed out).
To test this out quickly try:
System.out.println(new String(" hello there ").trim().replaceAll("\\s{2,}", " "));
and it will return:
"hello there"
Use the Apache commons StringUtils.normalizeSpace(String str) method. See docs here
This worked perfectly for me : sValue = sValue.trim().replaceAll("\\s+", " ");
trim() method removes the leading and trailing spaces and using replaceAll("regex", "string to replace") method with regex "\s+" matches more than one space and will replace it with a single space
myText = myText.trim().replaceAll("\\s+"," ");
The following code will compact any whitespace between words and remove any at the string's beginning and end
String input = "\n\n\n a string with many spaces, \n"+
" a \t tab and a newline\n\n";
String output = input.trim().replaceAll("\\s+", " ");
System.out.println(output);
This will output a string with many spaces, a tab and a newline
Note that any non-printable characters including spaces, tabs and newlines will be compacted or removed
For more information see the respective documentation:
String#trim() method
String#replaceAll(String regex, String replacement) method
For information about Java's regular expression implementation see the documentation of the Pattern class
"[ ]{2,}"
This will match more than one space.
String mytext = " hello there ";
//without trim -> " hello there"
//with trim -> "hello there"
mytext = mytext.trim().replaceAll("[ ]{2,}", " ");
System.out.println(mytext);
OUTPUT:
hello there
To eliminate spaces at the beginning and at the end of the String, use String#trim() method. And then use your mytext.replaceAll("( )+", " ").
You can first use String.trim(), and then apply the regex replace command on the result.
Try this one.
Sample Code
String str = " hello there ";
System.out.println(str.replaceAll("( +)"," ").trim());
OUTPUT
hello there
First it will replace all the spaces with single space. Than we have to supposed to do trim String because Starting of the String and End of the String it will replace the all space with single space if String has spaces at Starting of the String and End of the String So we need to trim them. Than you get your desired String.
String blogName = "how to do in java . com";
String nameWithProperSpacing = blogName.replaceAll("\\\s+", " ");
trim()
Removes only the leading & trailing spaces.
From Java Doc,
"Returns a string whose value is this string, with any leading and trailing whitespace removed."
System.out.println(" D ev Dum my ".trim());
"D ev Dum my"
replace(), replaceAll()
Replaces all the empty strings in the word,
System.out.println(" D ev Dum my ".replace(" ",""));
System.out.println(" D ev Dum my ".replaceAll(" ",""));
System.out.println(" D ev Dum my ".replaceAll("\\s+",""));
Output:
"DevDummy"
"DevDummy"
"DevDummy"
Note: "\s+" is the regular expression similar to the empty space character.
Reference : https://www.codedjava.com/2018/06/replace-all-spaces-in-string-trim.html
In Kotlin it would look like this
val input = "\n\n\n a string with many spaces, \n"
val cleanedInput = input.trim().replace(Regex("(\\s)+"), " ")
A lot of correct answers been provided so far and I see lot of upvotes. However, the mentioned ways will work but not really optimized or not really readable.
I recently came across the solution which every developer will like.
String nameWithProperSpacing = StringUtils.normalizeSpace( stringWithLotOfSpaces );
You are done.
This is readable solution.
You could use lookarounds also.
test.replaceAll("^ +| +$|(?<= ) ", "");
OR
test.replaceAll("^ +| +$| (?= )", "")
<space>(?= ) matches a space character which is followed by another space character. So in consecutive spaces, it would match all the spaces except the last because it isn't followed by a space character. This leaving you a single space for consecutive spaces after the removal operation.
Example:
String[] tests = {
" x ", // [x]
" 1 2 3 ", // [1 2 3]
"", // []
" ", // []
};
for (String test : tests) {
System.out.format("[%s]%n",
test.replaceAll("^ +| +$| (?= )", "")
);
}
See String.replaceAll.
Use the regex "\s" and replace with " ".
Then use String.trim.
String str = " hello world"
reduce spaces first
str = str.trim().replaceAll(" +", " ");
capitalize the first letter and lowercase everything else
str = str.substring(0,1).toUpperCase() +str.substring(1,str.length()).toLowerCase();
you should do it like this
String mytext = " hello there ";
mytext = mytext.replaceAll("( +)", " ");
put + inside round brackets.
String str = " this is string ";
str = str.replaceAll("\\s+", " ").trim();
This worked for me
scan= filter(scan, " [\\s]+", " ");
scan= sac.trim();
where filter is following function and scan is the input string:
public String filter(String scan, String regex, String replace) {
StringBuffer sb = new StringBuffer();
Pattern pt = Pattern.compile(regex);
Matcher m = pt.matcher(scan);
while (m.find()) {
m.appendReplacement(sb, replace);
}
m.appendTail(sb);
return sb.toString();
}
The simplest method for removing white space anywhere in the string.
public String removeWhiteSpaces(String returnString){
returnString = returnString.trim().replaceAll("^ +| +$|( )+", " ");
return returnString;
}
check this...
public static void main(String[] args) {
String s = "A B C D E F G\tH I\rJ\nK\tL";
System.out.println("Current : "+s);
System.out.println("Single Space : "+singleSpace(s));
System.out.println("Space count : "+spaceCount(s));
System.out.format("Replace all = %s", s.replaceAll("\\s+", ""));
// Example where it uses the most.
String s = "My name is yashwanth . M";
String s2 = "My nameis yashwanth.M";
System.out.println("Normal : "+s.equals(s2));
System.out.println("Replace : "+s.replaceAll("\\s+", "").equals(s2.replaceAll("\\s+", "")));
}
If String contains only single-space then replace() will not-replace,
If spaces are more than one, Then replace() action performs and removes spacess.
public static String singleSpace(String str){
return str.replaceAll(" +| +|\t|\r|\n","");
}
To count the number of spaces in a String.
public static String spaceCount(String str){
int i = 0;
while(str.indexOf(" ") > -1){
//str = str.replaceFirst(" ", ""+(i++));
str = str.replaceFirst(Pattern.quote(" "), ""+(i++));
}
return str;
}
Pattern.quote("?") returns literal pattern String.
My method before I found the second answer using regex as a better solution. Maybe someone needs this code.
private String replaceMultipleSpacesFromString(String s){
if(s.length() == 0 ) return "";
int timesSpace = 0;
String res = "";
for (int i = 0; i < s.length(); i++) {
char c = s.charAt(i);
if(c == ' '){
timesSpace++;
if(timesSpace < 2)
res += c;
}else{
res += c;
timesSpace = 0;
}
}
return res.trim();
}
Stream version, filters spaces and tabs.
Stream.of(str.split("[ \\t]")).filter(s -> s.length() > 0).collect(Collectors.joining(" "))
I know replaceAll method is much easier but I wanted to post this as well.
public static String removeExtraSpace(String input) {
input= input.trim();
ArrayList <String> x= new ArrayList<>(Arrays.asList(input.split("")));
for(int i=0; i<x.size()-1;i++) {
if(x.get(i).equals(" ") && x.get(i+1).equals(" ")) {
x.remove(i);
i--;
}
}
String word="";
for(String each: x)
word+=each;
return word;
}
String myText = " Hello World ";
myText = myText.trim().replace(/ +(?= )/g,'');
// Output: "Hello World"
string.replaceAll("\s+", " ");
If you already use Guava (v. 19+) in your project you may want to use this:
CharMatcher.whitespace().trimAndCollapseFrom(input, ' ');
or, if you need to remove exactly SPACE symbol ( or U+0020, see more whitespaces) use:
CharMatcher.anyOf(" ").trimAndCollapseFrom(input, ' ');
public class RemoveExtraSpacesEfficient {
public static void main(String[] args) {
String s = "my name is mr space ";
char[] charArray = s.toCharArray();
char prev = s.charAt(0);
for (int i = 0; i < charArray.length; i++) {
char cur = charArray[i];
if (cur == ' ' && prev == ' ') {
} else {
System.out.print(cur);
}
prev = cur;
}
}
}
The above solution is the algorithm with the complexity of O(n) without using any java function.
Please use below code
package com.myjava.string;
import java.util.StringTokenizer;
public class MyStrRemoveMultSpaces {
public static void main(String a[]){
String str = "String With Multiple Spaces";
StringTokenizer st = new StringTokenizer(str, " ");
StringBuffer sb = new StringBuffer();
while(st.hasMoreElements()){
sb.append(st.nextElement()).append(" ");
}
System.out.println(sb.toString().trim());
}
}