Develop Reference

How to change the number graphically when receiving data?

Good afternoon, I am using stm32 Blue Pill on USB raised com - port, development environment "IAR".
The problem is the following, when I connect through the application, the number "3"
does not change to the number "50" after the arrow, but on the contrary is shown next !
See Figure 1.2. I work under the protocol.
How do you achieve this?
I'm using the controlP5 library and cp5.addNumberbox.
Data in "IAR".
int Bullet = 50; // variable for result
sprintf((char *)str, "(,%d,-Ђ",Bullet); // sending a command with data to stm32.
In the code of the Displaydata tab, the line "case 40" is the symbol (
The command can also be sent through the terminal using a virtual com port.
Command: (, 50 ,! Figure 3.
I'll have to lay out the whole little project for you to check it out.
Com_Interface1:
import processing.serial.*;
import controlP5.*;
ControlP5 cp5;
DropdownList serialPortsList;
Serial serialPort;
final int BAUD_RATE = 9600;
char parity = 'N';
int dataBits = 8;
float stopBits = 1.0;
public void setup() {
background(50);
size(700, 420, P3D);
surface.setTitle("TEST");
surface.setResizable(false);
setupUI();
smooth();
frameRate(30);
writeOutgioing[lengthmas-1]=1;
String[] portNames = Serial.list();
//serialPort.clear(); // Why does not it work?
for (int i = 0; i < portNames.length; i++) serialPortsList.addItem(portNames[i], i);
}
public void toplug (int theValue)
{ // Start button on click sends a commad 1.
println("Button click events: "+theValue);
strata =!strata;
if (!strata) {
connection.setLabel("Пуск");
serialPort.dispose();
Vin.setText("Voltage K.V - ");
inputPULI.setLabel("Bullet");
} else {
connection.setLabel("СТОП");
serialports((int)serialPortsList.getValue());
writeOutgioing[0]=1;
writeOut();
}
}
public void serialports(int theValue) {
try {
serialPort = new Serial(this, Serial.list()[theValue], BAUD_RATE, parity, dataBits, stopBits);
serialPort.bufferUntil('\n');
println("COM connected: "+ Serial.list()[theValue] );
/*Send.unlock();
connection.unlock();*/ // locking buttons in applications if not connected via rs-232.
}
catch(Exception e) {
System.err.println("Error opening serial port" + Serial.list()[theValue]);
e.printStackTrace();
}
}
/*void controlEvent(ControlEvent event){
println(event.getController().getName(),"changed value to",event.getValue(),"inputPULI = ",PUL,"inputNapryzenieKV = ",NapryzenieKV,"CheckBoxuvum= ",
UV/UM,"P4 = ",std2,);
}*/
Displaydata:
void Displaydata() {
switch(x)
{
case 20:
// What to write?
// label(testRead[1]+" Мин."); // ImageButton
// min=testRead[1];
break;
case 30:
// What to write?
// P4.setText("std2"+ testRead[1]); // CheckBox
break;
case 40:
inputPULI.setLabel("Bullet: " + testRead[1] );
break;
case 70:
inputNapryzenieKV.setLabel("Voltage: " + testRead[1] );
break;
case 60:
Vin.setText("Voltage K.V: " + testRead[1] + " " + testRead[2]);
break;
case 50:
// What to write?
//CheckBoxuvum.setText("UV/UM - " +testRead[1] ); // RadioButton
break;
default:
println("DisplayData(): no case selected.");
break; // technically not necessary, but I like my switches tidy
}
}
GUI:
int PUL;
float NapryzenieKV;
boolean strata=false;
ImageButton button;
Numberbox inputPULI;
Numberbox inputNapryzenieKV;
RadioButton CheckBoxuvum;
CheckBox P4;
Textlabel Vin;
Button connection;
Button Send;
public void setupUI()
{
cp5 = new ControlP5(this);
PFont fontn = createFont("Times New Roman", 18);
PFont p = createFont("Times New Roman", 18);
ControlFont font=new
ControlFont(p);
cp5.setFont(font);
connection = cp5.addButton("toplug")
.setCaptionLabel("ПУСК")
.setPosition(387, 30)
.setSize(150, 30);
serialPortsList = cp5.addDropdownList("Порт")
.setPosition(130, 30)
.setSize(150, 200)
.setItemHeight(30)
.setBarHeight(30);
PImage[] imgs = {loadImage("button101.png"), loadImage("button102.png"), loadImage("button103.png")};
Send = cp5.addButton("toapply")
//.setCaptionLabel("Apply")
//.setPosition(510, 370)
//.setSize(150, 30);
.setPosition(590, 330)
.setImages(imgs)
.updateSize();
//.lock()
Vin = cp5.addTextlabel("naprazhenie kondencatora")
.setText("Voltage K.V")
.setFont(p)
.setColor(color(#00ffff))
.setPosition(45, 320);
CheckBoxuvum = cp5.addRadioButton("UV/UM")
.setPosition(155, 360)
.setSize(15, 15)
.setColorActive(color(255))
.setItemsPerRow(2)
.setSpacingColumn(85)
.addItem("+", 1)
.addItem("-", 2);
P4 = cp5.addCheckBox("std2")
.setPosition(150, 190)
.setSize(15, 15)
.setItemsPerRow(1)
.setSpacingColumn(30)
.setSpacingRow(20)
.addItem("Check", 2);
inputPULI = cp5.addNumberbox("PUL")
.setLabel("Bullet")
.setPosition(220, 220)
.setSize(80, 30)
.setColorValue(0xffffff00)
.setFont(p)
.setScrollSensitivity(1.1)
.setDirection(Controller.HORIZONTAL)
.setRange(1, 199)
.setValue(3);
Label labelinputPULI = inputPULI.getCaptionLabel();
labelinputPULI.setFont(font);
labelinputPULI.setColor(color(#00ffff));
labelinputPULI.toUpperCase(false);
labelinputPULI.setText("Bullet");
labelinputPULI.align(ControlP5.LEFT_OUTSIDE, CENTER);
labelinputPULI.getStyle().setPaddingLeft(-25);
inputNapryzenieKV = cp5.addNumberbox("NapryzenieKV")
.setLabel("Voltage")
.setPosition(150, 270)
.setSize(80, 30)
.setColorValue(0xffffff00)
.setFont(p)
.setScrollSensitivity(1.1)
.setMin(25)
.setMax(99)
.setMultiplier(0.01)
.setDirection(Controller.HORIZONTAL)
.setValue(25);
Label labelinputNapryzenieKV = inputNapryzenieKV.getCaptionLabel();
labelinputNapryzenieKV.setFont(font);
labelinputNapryzenieKV.setColor(color(#00ffff));
labelinputNapryzenieKV.toUpperCase(false);
labelinputNapryzenieKV.setText("Напряжение");
labelinputNapryzenieKV.align(ControlP5.LEFT_OUTSIDE, CENTER);
labelinputNapryzenieKV.getStyle().setPaddingLeft(-45);
textFont(fontn);
{
// button dimensions
int w = 99;
int h = 25;
// test with generated images
button = new ImageButton(555, 230, w, h,
new PImage[]{
loadImage("0.png"), // off
loadImage("1.png"), // 10
loadImage("2.png"), // 20
loadImage("3.png"), // 30
loadImage("4.png"), // 40
loadImage("5.png"), // 50
loadImage("6.png"), // 60
});
}
}
void mousePressed() {
button.mousePressed(mouseX, mouseY);
println(button.min);
}
// test images to represent loaded state images
PImage getImage(int w, int h, int c) {
PImage img = createImage(w, h, RGB);
java.util.Arrays.fill(img.pixels, c);
img.updatePixels();
return img;
}
// make a custom image button class
class ImageButton {
// minutes is the data it stores
int min = 0;
// images for each state
PImage[] stateImages;
// which image to display
int stateIndex;
// position
int x, y;
// dimensions: width , height
int w, h;
// text to display
String label = "ВЫКЛ";
ImageButton(int x, int y, int w, int h, PImage[] stateImages) {
this.x = x;
this.y = y;
this.w = w;
this.h = h;
this.stateImages = stateImages;
}
void mousePressed(int mx, int my) {
// check the cursor is within the button bounds
boolean isOver = ((mx >= x && mx <= x + w) && // check horizontal
(my >= y && my <= y + h) ); // check vertical
if (isOver) {
min += 10;
stateIndex++;
if (min>60) {
min = 0;
stateIndex = 0;
label = "ВЫКЛ";
} else {
label = (str(min) + "Мин");
}
}
}
void draw() {
// if the images and index are valid
if (stateImages != null && stateIndex < stateImages.length) {
image(stateImages[stateIndex], x, y, w, h);
} else {
println("error displaying button state image");
println("stateImages: ");
printArray(stateImages);
println("stateIndex: " + stateIndex);
}
// display text
//text(label, x + 17, y + h - 8);
}
}
void controlEvent(ControlEvent theEvent) {
if (theEvent.isFrom(CheckBoxuvum)) {
//myColorBackground = 0;
print("got an event from "+CheckBoxuvum.getName()+"\t\n");
// checkbox uses arrayValue to store the state of
// individual checkbox-items. usage:
println(CheckBoxuvum.getArrayValue());
int col = 0;
for (int i=0; i<CheckBoxuvum.getArrayValue().length; i++) {
int n = (int)CheckBoxuvum.getArrayValue()[i];
print(n);
if (n==1) {
//myColorBackground += CheckBoxuvum.getItem(i).internalValue();
}
}
println();
}
if (theEvent.isGroup()) {
// check if the Event was triggered from a ControlGroup
println("event from group : "+theEvent.getGroup().getValue()+" from "+theEvent.getGroup());
} else if (theEvent.isController()) {
println("event from controller : "+theEvent.getController().getValue()+" from "+theEvent.getController());
}
}
Protocol:
int lengthmas = 7;
int RC = 0x21; // -128 separating byte в java
int[] writeOutgioing = new int[lengthmas];
String incomingData= null;
String outgoingData=null;
String[] testRead = new String[lengthmas];
int x;
void readInc() {
while ( serialPort.available() > 0)
{
incomingData = serialPort.readStringUntil(RC);
testRead = split (incomingData, ',' );
if (testRead != null)
{
x = (int) testRead[0].charAt(0);
Displaydata();
}
}
}
void writeOut() {
outgoingData=str(writeOutgioing[0])+str(writeOutgioing[1])+str(writeOutgioing[2])+str(writeOutgioing[3])+str(writeOutgioing[4])+str(writeOutgioing[5])+str(writeOutgioing[6]); // sending data as a string.
serialPort.write(outgoingData);
}
Senddata:
public void toapply()
{
}
loop:
void draw()
{
background(50);
button.draw();
if (strata)
{
readInc();
}
}
code:
inputPULI = cp5.addNumberbox("PUL")
.setLabel("Bullet")
.setPosition(220, 220)
.setSize(80, 30)
.setColorValue(0xffffff00)
.setFont(p)
.setScrollSensitivity(1.1)
.setDirection(Controller.HORIZONTAL)
.setRange(1, 199)
.setValue(3);
Label labelinputPULI = inputPULI.getCaptionLabel();
labelinputPULI.setFont(font);
labelinputPULI.setColor(color(#00ffff));
labelinputPULI.toUpperCase(false);
labelinputPULI.setText("Bullet");
labelinputPULI.align(ControlP5.LEFT_OUTSIDE, CENTER);
labelinputPULI.getStyle().setPaddingLeft(-25);

I figured it out myself, I had to write setLabel->setValueLabel

MPandroidChart) How to apply two colors to setFillColor

example
What I've tried.
Please help me.. I really don't know.
I think it's related to canvas class.
CustomLineChartRenderer
It seems to me that color is not filled according to x value, but color is filled at once.
It's hard because I'm not used to canvas. Please help me.
Here are three methods for drawing lines and filling in colors.
#Override
protected void drawLinearFill(Canvas c, ILineDataSet dataSet, Transformer trans, XBounds bounds) {
final Path filled = mGenerateFilledPathBuffer;
final int startingIndex = bounds.min;
final int endingIndex = bounds.range + bounds.min;
final int indexInterval = 128;
int currentStartIndex = 0;
int currentEndIndex = indexInterval;
int iterations = 0;
// Doing this iteratively in order to avoid OutOfMemory errors that can happen on large bounds sets.
do {
currentStartIndex = startingIndex + (iterations * indexInterval);
currentEndIndex = currentStartIndex + indexInterval;
currentEndIndex = currentEndIndex > endingIndex ? endingIndex : currentEndIndex;
if (currentStartIndex <= currentEndIndex) {
generateFilledPath(dataSet, currentStartIndex, currentEndIndex, filled);
trans.pathValueToPixel(filled);
final Drawable drawable = dataSet.getFillDrawable();
if (drawable != null) {
drawFilledPath(c, filled, drawable);
} else {
//////Here part of applying color
drawFilledPath(c, filled, dataSet.getFillColor(), dataSet.getFillAlpha());
}
}
iterations++;
} while (currentStartIndex <= currentEndIndex);
}
#Override
protected void drawFilledPath(Canvas c, Path filledPath, int fillColor, int fillAlpha) {
int color = (fillAlpha << 24) | (fillColor & 0xffffff);
if (clipPathSupported()) {
Log.e("clipPathSupported","1");
int save = c.save();
c.clipPath(filledPath);
c.drawColor(color);
c.restoreToCount(save);
} else {
Log.e("clipPathSupported","2");
// save
Paint.Style previous = mRenderPaint.getStyle();
int previousColor = mRenderPaint.getColor();
// set
mRenderPaint.setStyle(Paint.Style.FILL);
mRenderPaint.setColor(color);
c.drawPath(filledPath, mRenderPaint);
// restore
mRenderPaint.setColor(previousColor);
mRenderPaint.setStyle(previous);
}
}
private void generateFilledPath(final ILineDataSet dataSet, final int startIndex, final int endIndex, final Path outputPath) {
final float fillMin = dataSet.getFillFormatter().getFillLinePosition(dataSet, mChart);
final float phaseY = mAnimator.getPhaseY();
final boolean isDrawSteppedEnabled = dataSet.getMode() == LineDataSet.Mode.STEPPED;
final Path filled = outputPath;
filled.reset();
final Entry entry = dataSet.getEntryForIndex(startIndex);
filled.moveTo(entry.getX(), fillMin);
filled.lineTo(entry.getX(), entry.getY() * phaseY);
// create a new path
Entry currentEntry = null;
Entry previousEntry = entry;
for (int x = startIndex + 1; x <= endIndex; x++) {
currentEntry = dataSet.getEntryForIndex(x);
if (isDrawSteppedEnabled) {
filled.lineTo(currentEntry.getX(), previousEntry.getY() * phaseY);
}
filled.lineTo(currentEntry.getX(), currentEntry.getY() * phaseY);
previousEntry = currentEntry;
}
// close up
if (currentEntry != null) {
filled.lineTo(currentEntry.getX(), fillMin);
}
filled.close();
}

You can use shader, same :
mRenderPaint.shader = LinearGradient(fromX, fromY, toX, toY, color1,
color2,
Shader.TileMode.CLAMP)

Saving serial data in Processing

Hello all for the second time,
Initially I was looking for a broad answer, but this thread got blocked for being "too broad"... so I've got no choice, but to go into detail. My apologies if asking the question again is against the forum guidelines, I'm new to stackoverflow so please be kind.
I’ve got data coming into a serial port at 250Hz and I’d like to save it all to a .csv file. Of course draw() is not going to be able to keep up with that rate of data...
At the moment I am using the serialEvent(port) to collect and parse the data. Once parsed out, I'm calling a function in draw to add the data to a new line in a table and then saving that table every 5 seconds...
Yes, I see the obvious flaw that if I'm saving the current data in draw then of course it's not going to be able to save all the data coming in, but rather just the data that happens to be present when the data saving function is called... but I'm not sure of the best way to solve that. A buffer scheme? Or can I have a separate thread that just adds ALL data coming in to a table?
which lead to my initial (broad) question...
Is there a way to save all incoming data to a file without polling?
Thanks to all in advance.. code below:
Twain
import processing.serial.*;
import static javax.swing.JOptionPane.*;
Table table;
String Path = "PathProvidedHere.csv";
String message;
//Some time keeping variables
int hours, minutes, seconds, milliseconds;
float SaveTime;
//Serial port selection
Serial myPort;
String COMx, COMlist = "";
final boolean debug = true;
String portName;
// Data variables
float yaw = 0.0; float pitch = 0.0; float roll = 0.0;
float A1, A2, A3, A4;
float E1, E2, E3, E4;
void setup()
{
//Set up GIU box
size(1024, 768, P3D);
frameRate(250);
smooth();
//Some other setups like fonts, graphs, etc.
//Set up the logging table
table = new Table();
table.addColumn("A1"); table.addColumn("A2"); table.addColumn("A3"); table.addColumn("A4");
table.addColumn(""); table.addColumn("E1"); table.addColumn("E3"); table.addColumn("E4");
table.addColumn(" "); table.addColumn("min"); table.addColumn("sec"); table.addColumn("milli");
portName = chooseCOM();
delay(1000);
}
void draw()
{
SavetoCSV();
//serialEvent(myPort); // read and parse incoming serial message
ACouple();
Unrelated();
FunctionsHere();
if(millis() - SaveTime > 5000)
{
saveTable(table, Path);
SaveTime=millis();
}
}
String chooseCOM()
{
setupP2 = true;
try
{
if (debug) printArray(Serial.list());
int i = Serial.list().length;
if (i != 0)
{
if (i >= 2)
{
// need to check which port the inst uses -
// for now we'll just let the user decide
for (int j = 0; j < i; )
{
COMlist += char(j+'a') + " = " + Serial.list()[j];
if (++j < i) COMlist += ", ";
}
COMx = showInputDialog("Which COM port is correct? (a,b,..):\n"+COMlist);
if (COMx == null) exit();
if (COMx.isEmpty()) exit();
i = int(COMx.toLowerCase().charAt(0) - 'a') + 1;
}
String portName = Serial.list()[i-1];
if (debug) //println(portName + " Selected");
myPort = new Serial(this, portName, 115200); // change baud rate to your liking
myPort.bufferUntil(13); // buffer until CR/LF appears, but not required..
return portName;
}
else
{
showMessageDialog(frame, "Device is not connected to the PC");
exit();
}
}
catch (Exception e)
{ //Print the type of error
showMessageDialog(frame, "COM port is not available (may\nbe in use by another program)");
//println("Error:", e);
exit();
}
return "noPort";
}
void serialEvent(Serial myPort)
{
int newLine = 13; // new line character in ASCII
do
{
message = myPort.readStringUntil(newLine); // read from port until new line
if (message != null)
{
String[] list = split(trim(message), " ");
if (list.length == 4 && list[0].equals("i"))
{
yaw = float(list[1]); // convert to float yaw
pitch = float(list[2]); // convert to float pitch
roll = float(list[3]); // convert to float roll
}
else if (list.length == 5 && list[0].equals("s"))
{
A1 = float(list[1]);
A2 = float(list[2]);
A3 = float(list[3]);
A4 = float(list[4]);
}
else if (list.length >=2 && list[0].equals("b"))
{
Battery = int(list[1]);
}
else if (list.length >= 2 && list[0].equals("m"))
{
MACid = int(list[1]);
}
else
{
//print anything extra to console
//println(message);
}
}
} while (message != null);
}
void SavetoCSV()
{
if (A1 != 0)
{
TableRow newRow = table.addRow();
newRow.setFloat("A1", (A1));
newRow.setFloat("A2", (A2));
newRow.setFloat("A3", (A3));
newRow.setFloat("A4", (A4));
//saveTable(table, Path);
}
}
Additional info:
- Processing P3
- For the record, with the rest of my script I can get draw up to 80hz or so
- I'd be okay with saving all the data and parsing it later

Went the buffer route.... I think I'm getting close now. Unsure if I'm saving the data in the right order or if the saving process will halt the rest of the processes...
Code:
import processing.serial.*;
import static javax.swing.JOptionPane.*;
//Arrays to save the data
LinkedList<Integer> A1c = new LinkedList<Integer>();
LinkedList<Integer> A2c = new LinkedList<Integer>();
LinkedList<Integer> A3c = new LinkedList<Integer>();
LinkedList<Integer> A4c = new LinkedList<Integer>();
int bufferLength = 500;
int bufflen = 0;
//Serial port selection
Serial myPort;
String COMx, COMlist = "";
final boolean debug = true;
String portName;
// Data variables
float yaw = 0.0; float pitch = 0.0; float roll = 0.0;
float A1, A2, A3, A4;
//Data log variables
Table table;
String Path = "PathtoFile.csv";
void setup() {
//Set up GIU box
size(1024, 768, P3D);
frameRate(250);
strokeWeight(50);
smooth();
//Set up the logging table
table = new Table();
table.addColumn("A1"); table.addColumn("A2"); table.addColumn("A3"); table.addColumn("A4");
portName = chooseCOM();
}
void draw() {
//SavetoCSV now called within SerialEvent()
//SavetoCSV();
//serialEvent(myPort); // read and parse incoming serial message
Some();
Unrelated();
FunctionsHere();
}
void serialEvent(Serial myPort) {
int newLine = 13; // new line character in ASCII
do {
message = myPort.readStringUntil(newLine); // read from port until new line
if (message != null) {
String[] list = split(trim(message), " ");
if (list.length == 4 && list[0].equals("i")) {
yaw = float(list[1]); // convert to float yaw
pitch = float(list[2]); // convert to float pitch
roll = float(list[3]); // convert to float roll
} else if (list.length == 5 && list[0].equals("s")) {
A1 = float(list[1]);
A2 = float(list[2]);
A3 = float(list[3]);
A4 = float(list[4]);
if (bufflen < bufferLength) {
A1c.push(int(A1));
A2c.push(int(A2));
A3c.push(int(A3));
A4c.push(int(A4));
bufflen++;
}
else{
bufflen = 0;
SavetoCSV();
}
} else if (list.length >=2 && list[0].equals("b")) {
Battery = int(list[1]);
} else if (list.length >= 2 && list[0].equals("m")) {
MACid = int(list[1]);
} else {
//print anything extra to console
//println(message);
}
}
} while (message != null);
}
void SavetoCSV() {
if (A1 != 0) {
for (int i = bufferLength - 1; i >= 0; i--){
if (i < bufferLength){
TableRow newRow = table.addRow();
newRow.setFloat("A1", (A1c.get(i)));
newRow.setFloat("A2", (A2c.get(i)));
newRow.setFloat("A3", (A3c.get(i)));
newRow.setFloat("A4", (A4c.get(i)));
} else saveTable(table, Path);
}
}
}
String chooseCOM() {
setupP2 = true;
try {
if (debug) printArray(Serial.list());
int i = Serial.list().length;
if (i != 0) {
if (i >= 2) {
// need to check which port the inst uses -
// for now we'll just let the user decide
for (int j = 0; j < i; ) {
COMlist += char(j+'a') + " = " + Serial.list()[j];
if (++j < i) COMlist += ", ";
}
COMx = showInputDialog("Which COM port is correct? (a,b,..):\n"+COMlist);
if (COMx == null) exit();
if (COMx.isEmpty()) exit();
i = int(COMx.toLowerCase().charAt(0) - 'a') + 1;
}
String portName = Serial.list()[i-1];
if (debug) //println(portName + " Selected");
myPort = new Serial(this, portName, 115200); // change baud rate to your liking
myPort.bufferUntil(13); // buffer until CR/LF appears, but not required..
return portName;
} else {
showMessageDialog(frame, "Device is not connected to the PC");
exit();
}
}
catch (Exception e)
{ //Print the type of error
showMessageDialog(frame, "COM port is not available (may\nbe in use by another program)");
//println("Error:", e);
exit();
}
return "noPort";
}

How to combine 2 images to form hybrid image?

I am implementing hybrid image with ImageJ and stuck at merging low filter image and high filter image to form a hybrid image.
This is what I already done.I have 2 images from Gaussian Blur and Laplician of Gaussian filer. I need to merge these 2 images by layer after that. Any idea how to achieve it?
import ij.*;
import ij.process.*;
import ij.gui.*;
import java.awt.*;
import ij.plugin.filter.*;
import ij.plugin.*;
import ij.io.*;
import java.io.*;
public class HybridImage_Plugin implements PlugInFilter{
int cfsize=3;
String img_lowPass;
String img_highPass;
private double[][] filter;
private double sigma;
float w=2 ,delta=0 , thr=0;
int mode=0;
//dialogbox
private boolean GUI()
{
GenericDialog gd = new GenericDialog("Enter Values", IJ.getInstance());
gd.addNumericField("Sigma (3,5,9,17,35)", cfsize, 0);
gd.addStringField("Low-Pass", "/home/atrx/ImageJ/plugins/hybridimage/l1.tif");
gd.addStringField("High-Pass", "/home/atrx/ImageJ/plugins/hybridimage/l2.tif");
return getUserParams(gd);
}
//get parameters
private boolean getUserParams(GenericDialog gd)
{
gd.showDialog();
if (gd.wasCanceled())
{
return false;
}
cfsize = (int) gd.getNextNumber();
img_lowPass = gd.getNextString();
img_highPass= gd.getNextString();
return true;
}
public int setup(String arg, ImagePlus imp) {
return PlugInFilter.NO_IMAGE_REQUIRED;
}
public void run(ImageProcessor ip) {
int[][] result;
if(GUI() == false)
{
return;
}
else
{
Opener opener1 = new Opener();
Opener opener2 = new Opener();
ImagePlus imp1= opener1.openImage(img_lowPass);
ImagePlus imp2= opener2.openImage(img_highPass);
//imp1.show("Low Pass Image");
//imp2.show("HighPass Image");
ImageProcessor ip1 = imp1.getProcessor();
ImageProcessor ip2 = imp2.getProcessor();
//lowpass filter(Gaussian Blur)
ip1.blurGaussian(cfsize);
showProcessor(ip1,"Low Pass Filtered Image");
//highpass filter(LoG)
int csize = ip2.getHeight();
int rsize = ip2.getWidth();
Rectangle rect = ip2.getRoi();
int d0,a0,acr,dow,it;
int i,x,y;
double h12, h21, ft, h1h2, h2h1, fmu, dh, dv;
double r, dt, dmx, dmn;
float logaus[] = new float[(rect.width>rect.height)? rect.width : rect.height];
float gaus[] = new float[(rect.width>rect.height)? rect.width : rect.height];
float dgaus[] = new float[(rect.width>rect.height)? rect.width : rect.height];
long zcn =0;
byte pixels[] = (byte[])ip2.getPixels();
int img_in[] = new int[rect.width*rect.height];
if (cfsize<0) cfsize=3;
if (cfsize>35) cfsize=35;
if(w<0) w=0;
int fsize = (int)(cfsize*w);
if (fsize%2 == 0)
{
fsize += 1;
}
double dimg[] = new double[rect.height*rect.width];
double dr[] = new double[rect.height*rect.width];
i=0;
for(y=rect.y;y<(rect.y+rect.height);y++)
{
for(x=rect.x;x<(rect.x+rect.width);x++)
{
img_in[i] = (pixels[(y*rsize)+x]&0xff);
i++;
}
}
int size = rect.width + fsize -1;
int image[] = new int[(rect.width+fsize-1)*(rect.height+fsize-1)];
int extension= (fsize/2);
for( i=0; i<rect.height;i++)
{
System.arraycopy(img_in,(i*rect.width),image,( ((i+extension)*(rect.width+fsize-1))+ extension ),rect.width);
}
h1h2= h2h1 = h12 =0.0;
for(i=1; i<( (fsize+1) /2);i++)
{
w = (float)cfsize/(float)2.0/(float)1.414;
ft = i/w;
gaus[i] = (float)Math.exp(-ft*ft/2);
h1h2 += 2.0 *(gaus[i]);
logaus[i] =(float)(1-ft*ft)*(float)Math.exp(-ft*ft/2);
h2h1 += 2.0*(logaus[i]);
dgaus[i] =(float)ft*(float)Math.exp(-ft*ft/2);
}
fmu = (h2h1 + 1)* (h1h2+1);
int prel[] = new int[rect.width+1];
dmx = -99999.9;
dmn = 99999.9;
int limit = ((rect.width+fsize-1)*(rect.height+fsize-1));
for(d0=0;d0<rect.height;d0++)
{
for(a0=0;a0<rect.width;a0++)
{
acr = a0 + fsize/2;
dow = d0 + fsize/2;
dh = dv = 0.0;
h1h2 = h2h1 = 0.0;
for (int j=1; j<(fsize+1)/2; j++)
{
int a0d0, a0d1, a1d0, a1d1;
h12=h21=0.0;
for(i=1;i<(fsize+1)/2;i++)
{
a0d0 = acr-i+((dow-j)*size);
a0d1 = acr-i+((dow+j)*size);
a1d0 = acr+i+((dow-j)*size);
a1d1 = acr+i+((dow+j)*size);
h12 += logaus[i]*(image[a0d0] + image[a0d1]+
image[a1d0] + image[a1d1]);
h21 += gaus[i]* (image[a0d0] + image[a0d1] +
image[a1d0] + image[a1d1]);
}
a0d0 = acr-j+dow*size;
a0d1 = acr+(dow-j)*size;
a1d0 = acr+j+dow*size;
a1d1 = acr+(dow+j)*size;
h1h2 += gaus[j] * (h12+ image[a0d0]+image[a0d1]+
image[a1d0]+image[a1d1]);
h2h1 += logaus[j]*(h21+ image[a0d0]+ image[a0d1] +
image[a1d0] + image[a1d1] );
if(thr != 0.0)
{
dh += dgaus[j] * ( image[a1d0] - image[a0d0] );
dv += dgaus[j] * ( image[a1d1] - image[a0d1] );
}
}
dt = dimg[d0*rect.width+a0] = h1h2 + h2h1 + (2*image[dow*size+acr]) ;
if (dt > dmx) dmx = dt;
if (dt < dmn) dmn = dt;
if( thr!= 0.0)
{
dr[(d0*rect.width)+a0] = Math.abs(dh) + Math.abs(dv);
}
}
}
dmx = (dmx-dmn) / 2;
dmn += dmx;
int row=0, column=0;
for(d0=0;d0<rect.height;d0++)
{
for(a0=0;a0<rect.width;a0++)
{
int id = (d0*rect.width) +a0;
int index = rsize*(rect.y+d0) + (a0+rect.x);
int k = 15;
it = (int)(dt = (dimg[id] - (dmn-delta*dmx))*255 / (dmx*(1+Math.abs(delta))));
switch(mode){
case 0:
pixels[index] = (byte)((dt-dmn+dmx)/dmx*127);
break;
case 1:
pixels[index] = (byte)Math.abs(it);
break;
case 2:
pixels[index] = (byte)( ((dt!=0)?((dt>0) ? 1: -1) : 0) * 192);
break;
case 3:
default:
r = dr[id];
it = ( (dt!=0) ? ((dt>0) ? 1: -1) : 0);
if( it==0 && r>=thr)
{
k = 255;
zcn++;
}
else
{
if( (it*prel[a0]<0 || it*prel[a0+1]<0) && r>=thr)
{
k = 255;
zcn++;
}
}
prel[a0+1] = it;
if(k==255 || mode!=3)
pixels[index] = (byte)k;
break;
}
}
}
showProcessor(ip2,"High Pass Filtered Image");
}
}
static void showProcessor(ImageProcessor ip, String title){
ImagePlus win = new ImagePlus(title,ip);
win.show();
}
}

Have you tried performing a weighted sum?
OUT = w*LPF + (1 - w)*HPF
This kind of sum is used everywhere. In particular, image blending, alpha matting and even in some optimization schemes.
However because there are patches of varying spatial frequencies all around your image, you may have to make the weight adaptive. You also have to choose which one you want to emphasize more. Do you want the low pass or high pass information to stand out more? Depending on which you want, you might want to use information in either one of those images and run it through some distance or similarity measure to get the right weight.

JTable table.getSelectedRows() issue

I create a JTable with a customized model and characteristics. I have a long written class that carries out the set up and rendering properly. I see that the .getSelectedRows() method is not working and never evaluates to a value. I was trying to get the index of the first row selected and the last. Here is my code.
public void actionPerformed(ActionEvent event) {
String command = event.getActionCommand();
rows = table.getSelectedRows();
firstRow = rows[0];
int rowCount = rows.length;
lastRow = rows[(rowCount - 1)];
if (command.equals("Run Threw")) {
}else if (command.equals("Shield Bash")) {
this.attack(firstRow, lastRow, command);
}
public boolean block (int defendersRow) {
}
public boolean fumble (int attackersRow) {
}
public boolean dodge (int defendersRow) {
}
public boolean critical (int attackersRow, int attackRoll) {
}
public void attack(int firstRow, int lastRow, String command) {
command = this.command;
firstRow = this.firstRow;
lastRow = this.lastRow;
if (command == "Bludgeon" || command == "React" || command == "ShieldBash") {
attackersRow = this.lastRow;
defendersRow = this.firstRow;
}else if(command == "Attack" || command == "Skill") {
attackersRow = this.firstRow;
defendersRow = this.lastRow;
}else {
}
table.setValueAt(true, attackersRow, 16);
fumbled = this.fumble(attackersRow);
if (fumbled == true) {
outputString = "fumbled";
}
Object maxDamageObject = table.getValueAt(attackersRow, 10);
int maxDamage = (Integer) maxDamageObject;
attackRoll = generator.nextInt(100) + 1;
this.critical(attackersRow, attackRoll);
if (criticaled == true) {
outputString = "criticaled";
}
dodged = this.dodge(defendersRow);
if (dodged == true) {
outputString = "dodged";
}
blocked = this.block(defendersRow);
if (blocked == true) {
outputString = "blocked";
}
int defenseRoll = generator.nextInt(100) + 1;
Object attackBaseObject = table.getValueAt(attackersRow, 6);
Object defenseBaseObject = table.getValueAt(defendersRow, 11);
int attackBase = (Integer) attackBaseObject;
int defenseBase = (Integer) defenseBaseObject;
int attack = attackRoll + attackBase;
int defense = defenseRoll + defenseBase;
Object minDamageObject = table.getValueAt(attackersRow, 9);
int minDamage = (Integer) minDamageObject;
damage = generator.nextInt((maxDamage - minDamage))+minDamage;
if (criticaled == true) {
damage = maxDamage * 2;
}else if (attack >= (defense + 50)) {
damage = damage * 2;
}else if (attack >= defense) {
damage = damage;
}else {
damage = 0;
}
this.outputSelection(outputString, attackersRow, defendersRow, command, damage);
this.damage(defendersRow, damage);
}
private void damage(int defendersRow, int damage) {
}
private void outputSelection(String outputString, int attackersRow, int defendersRow, String command, int damage) {
}

I doesn't see problem with code. May be you can cross check following points:
Are you able to select single / multiple row(s)? Or check what jTableObject.getRowSelectionAllowed() returns
Does your code gets called only after selecting rows. Your code should be executed after some rows are selected so that it can return you expected values.
Listener which calls above mentioned code, is it added to table.
Small points but better to cross check :).

As shown in this working example, you can add a ListSelectionListener to your table's ListSelectionModel and see if anything comes through. It may help pin down where things have gone awry: for example, a local table reference that shadows the intended one.