Java convert string to number, floating point only when needed? - java

I want to conver a string to number in Java. I already tried with two methods but both work bad with integers, adding an unneeded floating point: "1" > 1.0 (when I want "1" > 1 and "1.5" > 1.5). I found a couple more ways to convert strings to numbers but they either don't work or are many lines long, I cannot believe it's so complicated coming from javascript where I only need parseFloat().
This is what I'm trying now:
String numString = "1".trim().replaceAll(",","");
float num = (Float.valueOf(numString)).floatValue(); // First try
Double num2 = Double.parseDouble(numString); // Second try
System.out.println(num + " - " + num2); // returns 1.0 - 1.0
How can I have the floating point only when needed?


To format a float as you wish, use DecimalFormat :
DecimalFormat df = new DecimalFormat("#.###");
System.out.println(df.format(1.0f)); // prints 1
System.out.println(df.format(1.5f)); // prints 1.5
In your case, you could use
System.out.println(df.format(num) + " - " + df.format(num2));


I think what you're looking for is DecimalFormat
DecimalFormat format = new DecimalFormat("#.##");
double doubleFromTextField = Double.parseDouble(myField.getText());
System.out.println(format.format(doubleFromTextField));


The problem is with your question really in a type-safe language and I think you are mixing conversion and string representation. In Java or C# or C++ you convert to some predictable/expected type, looks like you expect the "Variant" behavior that you are used to in JavaScript.
What you could do in a type-safe language is this:
public static Object convert(String val)
{
// try to convert to int and if u could then return Integer
ELSE
//try to convert to float and if you could then return it
ELSE
//try to convert to double
etc...
}
Of course this is very inefficient just like JavaScript is compared to C++ or Java. Variants/polymorphism (using Object) comes at cost
Then you could do toString() to get integer formatted as integer, float as float and double as double polymorphically. But your question is ambiguous at best that leads me to believe that there is conceptual problem.

Related

Convert double with 8 or more characters to sting in java [duplicate]

I want to print a double value in Java without exponential form.
double dexp = 12345678;
System.out.println("dexp: "+dexp);
It shows this E notation: 1.2345678E7.
I want it to print it like this: 12345678
What is the best way to prevent this?

Java prevent E notation in a double:
Five different ways to convert a double to a normal number:
import java.math.BigDecimal;
import java.text.DecimalFormat;
public class Runner {
public static void main(String[] args) {
double myvalue = 0.00000021d;
//Option 1 Print bare double.
System.out.println(myvalue);
//Option2, use decimalFormat.
DecimalFormat df = new DecimalFormat("#");
df.setMaximumFractionDigits(8);
System.out.println(df.format(myvalue));
//Option 3, use printf.
System.out.printf("%.9f", myvalue);
System.out.println();
//Option 4, convert toBigDecimal and ask for toPlainString().
System.out.print(new BigDecimal(myvalue).toPlainString());
System.out.println();
//Option 5, String.format
System.out.println(String.format("%.12f", myvalue));
}
}
This program prints:
2.1E-7
.00000021
0.000000210
0.000000210000000000000001085015324114868562332958390470594167709350585
0.000000210000
Which are all the same value.
Protip: If you are confused as to why those random digits appear beyond a certain threshold in the double value, this video explains: computerphile why does 0.1+0.2 equal 0.30000000000001?
http://youtube.com/watch?v=PZRI1IfStY0

You could use printf() with %f:
double dexp = 12345678;
System.out.printf("dexp: %f\n", dexp);
This will print dexp: 12345678.000000. If you don't want the fractional part, use
System.out.printf("dexp: %.0f\n", dexp);
0 in %.0f means 0 places in fractional part i.e no fractional part. If you want to print fractional part with desired number of decimal places then instead of 0 just provide the number like this %.8f. By default fractional part is printed up to 6 decimal places.
This uses the format specifier language explained in the documentation.
The default toString() format used in your original code is spelled out here.

In short:
If you want to get rid of trailing zeros and Locale problems, then you should use:
double myValue = 0.00000021d;
DecimalFormat df = new DecimalFormat("0", DecimalFormatSymbols.getInstance(Locale.ENGLISH));
df.setMaximumFractionDigits(340); // 340 = DecimalFormat.DOUBLE_FRACTION_DIGITS
System.out.println(df.format(myValue)); // Output: 0.00000021
Explanation:
Why other answers did not suit me:
Double.toString() or System.out.println or FloatingDecimal.toJavaFormatString uses scientific notations if double is less than 10^-3 or greater than or equal to 10^7
By using %f, the default decimal precision is 6, otherwise you can hardcode it, but it results in extra zeros added if you have fewer decimals. Example:
double myValue = 0.00000021d;
String.format("%.12f", myvalue); // Output: 0.000000210000
By using setMaximumFractionDigits(0); or %.0f you remove any decimal precision, which is fine for integers/longs, but not for double:
double myValue = 0.00000021d;
System.out.println(String.format("%.0f", myvalue)); // Output: 0
DecimalFormat df = new DecimalFormat("0");
System.out.println(df.format(myValue)); // Output: 0
By using DecimalFormat, you are local dependent. In French locale, the decimal separator is a comma, not a point:
double myValue = 0.00000021d;
DecimalFormat df = new DecimalFormat("0");
df.setMaximumFractionDigits(340);
System.out.println(df.format(myvalue)); // Output: 0,00000021
Using the ENGLISH locale makes sure you get a point for decimal separator, wherever your program will run.
Why using 340 then for setMaximumFractionDigits?
Two reasons:
setMaximumFractionDigits accepts an integer, but its implementation has a maximum digits allowed of DecimalFormat.DOUBLE_FRACTION_DIGITS which equals 340
Double.MIN_VALUE = 4.9E-324 so with 340 digits you are sure not to round your double and lose precision.

You can try it with DecimalFormat. With this class you are very flexible in parsing your numbers.
You can exactly set the pattern you want to use.
In your case for example:
double test = 12345678;
DecimalFormat df = new DecimalFormat("#");
df.setMaximumFractionDigits(0);
System.out.println(df.format(test)); //12345678

I've got another solution involving BigDecimal's toPlainString(), but this time using the String-constructor, which is recommended in the javadoc:
this constructor is compatible with the values returned by Float.toString and Double.toString. This is generally the preferred way to convert a float or double into a BigDecimal, as it doesn't suffer from the unpredictability of the BigDecimal(double) constructor.
It looks like this in its shortest form:
return new BigDecimal(myDouble.toString()).stripTrailingZeros().toPlainString();
NaN and infinite values have to be checked extra, so looks like this in its complete form:
public static String doubleToString(Double d) {
if (d == null)
return null;
if (d.isNaN() || d.isInfinite())
return d.toString();
return new BigDecimal(d.toString()).stripTrailingZeros().toPlainString();
}
This can also be copied/pasted to work nicely with Float.
For Java 7 and below, this results in "0.0" for any zero-valued Doubles, so you would need to add:
if (d.doubleValue() == 0)
return "0";

Java/Kotlin compiler converts any value greater than 9999999 (greater than or equal to 10 million) to scientific notation ie. Epsilion notation.
Ex: 12345678 is converted to 1.2345678E7
Use this code to avoid automatic conversion to scientific notation:
fun setTotalSalesValue(String total) {
var valueWithoutEpsilon = total.toBigDecimal()
/* Set the converted value to your android text view using setText() function */
salesTextView.setText( valueWithoutEpsilon.toPlainString() )
}

This will work as long as your number is a whole number:
double dnexp = 12345678;
System.out.println("dexp: " + (long)dexp);
If the double variable has precision after the decimal point it will truncate it.

I needed to convert some double to currency values and found that most of the solutions were OK, but not for me.
The DecimalFormat was eventually the way for me, so here is what I've done:
public String foo(double value) //Got here 6.743240136E7 or something..
{
DecimalFormat formatter;
if(value - (int)value > 0.0)
formatter = new DecimalFormat("0.00"); // Here you can also deal with rounding if you wish..
else
formatter = new DecimalFormat("0");
return formatter.format(value);
}
As you can see, if the number is natural I get - say - 20000000 instead of 2E7 (etc.) - without any decimal point.
And if it's decimal, I get only two decimal digits.

I think everyone had the right idea, but all answers were not straightforward.
I can see this being a very useful piece of code. Here is a snippet of what will work:
System.out.println(String.format("%.8f", EnterYourDoubleVariableHere));
the ".8" is where you set the number of decimal places you would like to show.
I am using Eclipse and it worked no problem.
Hope this was helpful. I would appreciate any feedback!

The following code detects if the provided number is presented in scientific notation. If so it is represented in normal presentation with a maximum of '25' digits.
static String convertFromScientificNotation(double number) {
// Check if in scientific notation
if (String.valueOf(number).toLowerCase().contains("e")) {
System.out.println("The scientific notation number'"
+ number
+ "' detected, it will be converted to normal representation with 25 maximum fraction digits.");
NumberFormat formatter = new DecimalFormat();
formatter.setMaximumFractionDigits(25);
return formatter.format(number);
} else
return String.valueOf(number);
}

This may be a tangent.... but if you need to put a numerical value as an integer (that is too big to be an integer) into a serializer (JSON, etc.) then you probably want "BigInterger"
Example:
value is a string - 7515904334
We need to represent it as a numerical in a Json message:
{
"contact_phone":"800220-3333",
"servicer_id":7515904334,
"servicer_name":"SOME CORPORATION"
}
We can't print it or we'll get this:
{
"contact_phone":"800220-3333",
"servicer_id":"7515904334",
"servicer_name":"SOME CORPORATION"
}
Adding the value to the node like this produces the desired outcome:
BigInteger.valueOf(Long.parseLong(value, 10))
I'm not sure this is really on-topic, but since this question was my top hit when I searched for my solution, I thought I would share here for the benefit of others, lie me, who search poorly. :D

use String.format ("%.0f", number)
%.0f for zero decimal
String numSring = String.format ("%.0f", firstNumber);
System.out.println(numString);

I had this same problem in my production code when I was using it as a string input to a math.Eval() function which takes a string like "x + 20 / 50"
I looked at hundreds of articles... In the end I went with this because of the speed. And because the Eval function was going to convert it back into its own number format eventually and math.Eval() didn't support the trailing E-07 that other methods returned, and anything over 5 dp was too much detail for my application anyway.
This is now used in production code for an application that has 1,000+ users...
double value = 0.0002111d;
String s = Double.toString(((int)(value * 100000.0d))/100000.0d); // Round to 5 dp
s display as: 0.00021

This will work not only for a whole numbers:
double dexp = 12345678.12345678;
BigDecimal bigDecimal = new BigDecimal(Double.toString(dexp));
System.out.println("dexp: "+ bigDecimal.toPlainString());

My solution:
String str = String.format ("%.0f", yourDouble);

For integer values represented by a double, you can use this code, which is much faster than the other solutions.
public static String doubleToString(final double d) {
// check for integer, also see https://stackoverflow.com/a/9898613/868941 and
// https://github.com/google/guava/blob/master/guava/src/com/google/common/math/DoubleMath.java
if (isMathematicalInteger(d)) {
return Long.toString((long)d);
} else {
// or use any of the solutions provided by others, this is the best
DecimalFormat df =
new DecimalFormat("0", DecimalFormatSymbols.getInstance(Locale.ENGLISH));
df.setMaximumFractionDigits(340); // 340 = DecimalFormat.DOUBLE_FRACTION_DIGITS
return df.format(d);
}
}
// Java 8+
public static boolean isMathematicalInteger(final double d) {
return StrictMath.rint(d) == d && Double.isFinite(d);
}

This works for me. The output will be a String.
String.format("%.12f", myvalue);

Good way to convert scientific e notation
String.valueOf(YourDoubleValue.longValue())

Not able to print exact value of Double data Type variable [duplicate]

I want to print a double value in Java without exponential form.
double dexp = 12345678;
System.out.println("dexp: "+dexp);
It shows this E notation: 1.2345678E7.
I want it to print it like this: 12345678
What is the best way to prevent this?

Java prevent E notation in a double:
Five different ways to convert a double to a normal number:
import java.math.BigDecimal;
import java.text.DecimalFormat;
public class Runner {
public static void main(String[] args) {
double myvalue = 0.00000021d;
//Option 1 Print bare double.
System.out.println(myvalue);
//Option2, use decimalFormat.
DecimalFormat df = new DecimalFormat("#");
df.setMaximumFractionDigits(8);
System.out.println(df.format(myvalue));
//Option 3, use printf.
System.out.printf("%.9f", myvalue);
System.out.println();
//Option 4, convert toBigDecimal and ask for toPlainString().
System.out.print(new BigDecimal(myvalue).toPlainString());
System.out.println();
//Option 5, String.format
System.out.println(String.format("%.12f", myvalue));
}
}
This program prints:
2.1E-7
.00000021
0.000000210
0.000000210000000000000001085015324114868562332958390470594167709350585
0.000000210000
Which are all the same value.
Protip: If you are confused as to why those random digits appear beyond a certain threshold in the double value, this video explains: computerphile why does 0.1+0.2 equal 0.30000000000001?
http://youtube.com/watch?v=PZRI1IfStY0

You could use printf() with %f:
double dexp = 12345678;
System.out.printf("dexp: %f\n", dexp);
This will print dexp: 12345678.000000. If you don't want the fractional part, use
System.out.printf("dexp: %.0f\n", dexp);
0 in %.0f means 0 places in fractional part i.e no fractional part. If you want to print fractional part with desired number of decimal places then instead of 0 just provide the number like this %.8f. By default fractional part is printed up to 6 decimal places.
This uses the format specifier language explained in the documentation.
The default toString() format used in your original code is spelled out here.

In short:
If you want to get rid of trailing zeros and Locale problems, then you should use:
double myValue = 0.00000021d;
DecimalFormat df = new DecimalFormat("0", DecimalFormatSymbols.getInstance(Locale.ENGLISH));
df.setMaximumFractionDigits(340); // 340 = DecimalFormat.DOUBLE_FRACTION_DIGITS
System.out.println(df.format(myValue)); // Output: 0.00000021
Explanation:
Why other answers did not suit me:
Double.toString() or System.out.println or FloatingDecimal.toJavaFormatString uses scientific notations if double is less than 10^-3 or greater than or equal to 10^7
By using %f, the default decimal precision is 6, otherwise you can hardcode it, but it results in extra zeros added if you have fewer decimals. Example:
double myValue = 0.00000021d;
String.format("%.12f", myvalue); // Output: 0.000000210000
By using setMaximumFractionDigits(0); or %.0f you remove any decimal precision, which is fine for integers/longs, but not for double:
double myValue = 0.00000021d;
System.out.println(String.format("%.0f", myvalue)); // Output: 0
DecimalFormat df = new DecimalFormat("0");
System.out.println(df.format(myValue)); // Output: 0
By using DecimalFormat, you are local dependent. In French locale, the decimal separator is a comma, not a point:
double myValue = 0.00000021d;
DecimalFormat df = new DecimalFormat("0");
df.setMaximumFractionDigits(340);
System.out.println(df.format(myvalue)); // Output: 0,00000021
Using the ENGLISH locale makes sure you get a point for decimal separator, wherever your program will run.
Why using 340 then for setMaximumFractionDigits?
Two reasons:
setMaximumFractionDigits accepts an integer, but its implementation has a maximum digits allowed of DecimalFormat.DOUBLE_FRACTION_DIGITS which equals 340
Double.MIN_VALUE = 4.9E-324 so with 340 digits you are sure not to round your double and lose precision.

You can try it with DecimalFormat. With this class you are very flexible in parsing your numbers.
You can exactly set the pattern you want to use.
In your case for example:
double test = 12345678;
DecimalFormat df = new DecimalFormat("#");
df.setMaximumFractionDigits(0);
System.out.println(df.format(test)); //12345678

I've got another solution involving BigDecimal's toPlainString(), but this time using the String-constructor, which is recommended in the javadoc:
this constructor is compatible with the values returned by Float.toString and Double.toString. This is generally the preferred way to convert a float or double into a BigDecimal, as it doesn't suffer from the unpredictability of the BigDecimal(double) constructor.
It looks like this in its shortest form:
return new BigDecimal(myDouble.toString()).stripTrailingZeros().toPlainString();
NaN and infinite values have to be checked extra, so looks like this in its complete form:
public static String doubleToString(Double d) {
if (d == null)
return null;
if (d.isNaN() || d.isInfinite())
return d.toString();
return new BigDecimal(d.toString()).stripTrailingZeros().toPlainString();
}
This can also be copied/pasted to work nicely with Float.
For Java 7 and below, this results in "0.0" for any zero-valued Doubles, so you would need to add:
if (d.doubleValue() == 0)
return "0";

Java/Kotlin compiler converts any value greater than 9999999 (greater than or equal to 10 million) to scientific notation ie. Epsilion notation.
Ex: 12345678 is converted to 1.2345678E7
Use this code to avoid automatic conversion to scientific notation:
fun setTotalSalesValue(String total) {
var valueWithoutEpsilon = total.toBigDecimal()
/* Set the converted value to your android text view using setText() function */
salesTextView.setText( valueWithoutEpsilon.toPlainString() )
}

This will work as long as your number is a whole number:
double dnexp = 12345678;
System.out.println("dexp: " + (long)dexp);
If the double variable has precision after the decimal point it will truncate it.

I needed to convert some double to currency values and found that most of the solutions were OK, but not for me.
The DecimalFormat was eventually the way for me, so here is what I've done:
public String foo(double value) //Got here 6.743240136E7 or something..
{
DecimalFormat formatter;
if(value - (int)value > 0.0)
formatter = new DecimalFormat("0.00"); // Here you can also deal with rounding if you wish..
else
formatter = new DecimalFormat("0");
return formatter.format(value);
}
As you can see, if the number is natural I get - say - 20000000 instead of 2E7 (etc.) - without any decimal point.
And if it's decimal, I get only two decimal digits.

I think everyone had the right idea, but all answers were not straightforward.
I can see this being a very useful piece of code. Here is a snippet of what will work:
System.out.println(String.format("%.8f", EnterYourDoubleVariableHere));
the ".8" is where you set the number of decimal places you would like to show.
I am using Eclipse and it worked no problem.
Hope this was helpful. I would appreciate any feedback!

The following code detects if the provided number is presented in scientific notation. If so it is represented in normal presentation with a maximum of '25' digits.
static String convertFromScientificNotation(double number) {
// Check if in scientific notation
if (String.valueOf(number).toLowerCase().contains("e")) {
System.out.println("The scientific notation number'"
+ number
+ "' detected, it will be converted to normal representation with 25 maximum fraction digits.");
NumberFormat formatter = new DecimalFormat();
formatter.setMaximumFractionDigits(25);
return formatter.format(number);
} else
return String.valueOf(number);
}

This may be a tangent.... but if you need to put a numerical value as an integer (that is too big to be an integer) into a serializer (JSON, etc.) then you probably want "BigInterger"
Example:
value is a string - 7515904334
We need to represent it as a numerical in a Json message:
{
"contact_phone":"800220-3333",
"servicer_id":7515904334,
"servicer_name":"SOME CORPORATION"
}
We can't print it or we'll get this:
{
"contact_phone":"800220-3333",
"servicer_id":"7515904334",
"servicer_name":"SOME CORPORATION"
}
Adding the value to the node like this produces the desired outcome:
BigInteger.valueOf(Long.parseLong(value, 10))
I'm not sure this is really on-topic, but since this question was my top hit when I searched for my solution, I thought I would share here for the benefit of others, lie me, who search poorly. :D

use String.format ("%.0f", number)
%.0f for zero decimal
String numSring = String.format ("%.0f", firstNumber);
System.out.println(numString);

I had this same problem in my production code when I was using it as a string input to a math.Eval() function which takes a string like "x + 20 / 50"
I looked at hundreds of articles... In the end I went with this because of the speed. And because the Eval function was going to convert it back into its own number format eventually and math.Eval() didn't support the trailing E-07 that other methods returned, and anything over 5 dp was too much detail for my application anyway.
This is now used in production code for an application that has 1,000+ users...
double value = 0.0002111d;
String s = Double.toString(((int)(value * 100000.0d))/100000.0d); // Round to 5 dp
s display as: 0.00021

This will work not only for a whole numbers:
double dexp = 12345678.12345678;
BigDecimal bigDecimal = new BigDecimal(Double.toString(dexp));
System.out.println("dexp: "+ bigDecimal.toPlainString());

My solution:
String str = String.format ("%.0f", yourDouble);

For integer values represented by a double, you can use this code, which is much faster than the other solutions.
public static String doubleToString(final double d) {
// check for integer, also see https://stackoverflow.com/a/9898613/868941 and
// https://github.com/google/guava/blob/master/guava/src/com/google/common/math/DoubleMath.java
if (isMathematicalInteger(d)) {
return Long.toString((long)d);
} else {
// or use any of the solutions provided by others, this is the best
DecimalFormat df =
new DecimalFormat("0", DecimalFormatSymbols.getInstance(Locale.ENGLISH));
df.setMaximumFractionDigits(340); // 340 = DecimalFormat.DOUBLE_FRACTION_DIGITS
return df.format(d);
}
}
// Java 8+
public static boolean isMathematicalInteger(final double d) {
return StrictMath.rint(d) == d && Double.isFinite(d);
}

This works for me. The output will be a String.
String.format("%.12f", myvalue);

Good way to convert scientific e notation
String.valueOf(YourDoubleValue.longValue())

How to remove decimal in java without removing the remaining digits

Is there any method to remove the . in java into a double value?
Example :
56.11124
to
5611124

I don't think there's a mathematical way to find out how many decimals there are in a double. You can convert to a String, replace the dot, and then convert it back:
Double.parseDouble(Double.toString(56.11124).replace(".", ""));
Be careful of overflows when you parse the result though!

Here's one way to do it,
First, convert the double to a string. Then, call replace to replace . with an empty string. After that, parse the result into an int:
double d = 5.1;
String doubleString = Double.toString(5.1);
String removedDot = doubleString.replace(".", "");
int result = Integer.parseInt(removedDot);
Obviously, this wouldn't work if the double's string representation is in scientific notation like 5e16. This also does not work on integral double values, like 5, as its string representation is 5.0.
doubles are inaccurate by nature. 5 and 5.0 are the same value. This is why you can't really do this kind of operation. Do you expect different results for a and b?
double a = 5;
double b = 5.0;
If you do, then you can't really do this, since there is no way of knowing what the programmer wrote exactly at runtime.

This might work
class Example {
public static void main(String[] args) {
double val = 56.1112;
while( (double)((int)val) != val )
{
val *= 10;
}
System.out.printf( "%.0f", val );
}
}
Output: 561112
This works by casting the double to int which truncates the floating information 56.11124 => 56. While the values aren't equal you multiply it by the base to push the . out. I don't know if this is the best way.

You can convert to BigDecimal and use the unscaledValue method:
BigInteger unscaled = new BigDecimal(myDouble).unscaledValue();
Depending on your intended output, you might also use BigDecimal#valueof(double) to create the intermediate BigDecimal.
Javadoc for BigDecimal#new(double)
Javadoc for BigDecimal#valueOf(double)
Javadoc for BigDecimal#unscaledValue()

You can convert it to a String and remove the . and convert it back to double something like
double value = 56.11124;
value = Double.valueOf(("" + value).replace(".", "")).doubleValue();
This will return 5611124.0 since its a double you will have the floating point. You can convert it to an int, but you have to take care of the possible overflow. Otherwise it would look like this
int normalized = (int) value;

Move decimal point in double

I have this code:
Long dval = new Long((new Date()).getTime());
System.out.println("ogval:"+dval);
Double dd = (double)dval;
System.out.println("dval:"+dd);
Here is the output:
ogval:1381490769636
dval:1.381490769636E12
When I convert the value to Double, it adds a decimal point. Can I do the typecasting and get the value in double as it is?
The desired output would be:
ogval:1381490769636
dval:1381490769636
I have a function whose argument accepts only double value. When I try to pass a timestamp, it passes the decimal value inside the method.
I can't edit the function because its an inbuilt function of some package.

Simple answer is no.
Floating types can contain integer up to some arbitrary value, given by the way floats are stored. If the number is too big, it gets converted to decimal.
If you need to work with big integer values use BigInteger class.
Great tool to examine those imperfections is this float converter.
Try 123456789 in the float converter, it won't be stored exactly.

Use DecimalFormat, like:
Long dval = new Long((new Date()).getTime());
System.out.println("ogval:" + dval);
Double dd = (double) dval;
DecimalFormat format=new DecimalFormat("##########");
System.out.println("dval:" + format.format(dd));

Your problem is not with the type that you are using, but with the format that you are applying to it. Currently, the default format is used, because string + double implicitly calls Double.toString, which converts your specific double to a String using scientific notation. You can force a different format if you wish by using printf or any other formatting method that Java makes available to you:
System.out.printf("dval: %12.0f", dd);
(demo)

as an alternative you can try using bigdecimal
Long dval = new Long((new Date()).getTime());
System.out.println("ogval:"+dval);
Double dd = (double)dval;
System.out.println("dval:"+dd);
BigDecimal bd = new BigDecimal(dval);
System.out.println("bdval:"+bd.toPlainString());

How do I print a double value without scientific notation using Java?

I want to print a double value in Java without exponential form.
double dexp = 12345678;
System.out.println("dexp: "+dexp);
It shows this E notation: 1.2345678E7.
I want it to print it like this: 12345678
What is the best way to prevent this?

Java prevent E notation in a double:
Five different ways to convert a double to a normal number:
import java.math.BigDecimal;
import java.text.DecimalFormat;
public class Runner {
public static void main(String[] args) {
double myvalue = 0.00000021d;
//Option 1 Print bare double.
System.out.println(myvalue);
//Option2, use decimalFormat.
DecimalFormat df = new DecimalFormat("#");
df.setMaximumFractionDigits(8);
System.out.println(df.format(myvalue));
//Option 3, use printf.
System.out.printf("%.9f", myvalue);
System.out.println();
//Option 4, convert toBigDecimal and ask for toPlainString().
System.out.print(new BigDecimal(myvalue).toPlainString());
System.out.println();
//Option 5, String.format
System.out.println(String.format("%.12f", myvalue));
}
}
This program prints:
2.1E-7
.00000021
0.000000210
0.000000210000000000000001085015324114868562332958390470594167709350585
0.000000210000
Which are all the same value.
Protip: If you are confused as to why those random digits appear beyond a certain threshold in the double value, this video explains: computerphile why does 0.1+0.2 equal 0.30000000000001?
http://youtube.com/watch?v=PZRI1IfStY0

You could use printf() with %f:
double dexp = 12345678;
System.out.printf("dexp: %f\n", dexp);
This will print dexp: 12345678.000000. If you don't want the fractional part, use
System.out.printf("dexp: %.0f\n", dexp);
0 in %.0f means 0 places in fractional part i.e no fractional part. If you want to print fractional part with desired number of decimal places then instead of 0 just provide the number like this %.8f. By default fractional part is printed up to 6 decimal places.
This uses the format specifier language explained in the documentation.
The default toString() format used in your original code is spelled out here.

In short:
If you want to get rid of trailing zeros and Locale problems, then you should use:
double myValue = 0.00000021d;
DecimalFormat df = new DecimalFormat("0", DecimalFormatSymbols.getInstance(Locale.ENGLISH));
df.setMaximumFractionDigits(340); // 340 = DecimalFormat.DOUBLE_FRACTION_DIGITS
System.out.println(df.format(myValue)); // Output: 0.00000021
Explanation:
Why other answers did not suit me:
Double.toString() or System.out.println or FloatingDecimal.toJavaFormatString uses scientific notations if double is less than 10^-3 or greater than or equal to 10^7
By using %f, the default decimal precision is 6, otherwise you can hardcode it, but it results in extra zeros added if you have fewer decimals. Example:
double myValue = 0.00000021d;
String.format("%.12f", myvalue); // Output: 0.000000210000
By using setMaximumFractionDigits(0); or %.0f you remove any decimal precision, which is fine for integers/longs, but not for double:
double myValue = 0.00000021d;
System.out.println(String.format("%.0f", myvalue)); // Output: 0
DecimalFormat df = new DecimalFormat("0");
System.out.println(df.format(myValue)); // Output: 0
By using DecimalFormat, you are local dependent. In French locale, the decimal separator is a comma, not a point:
double myValue = 0.00000021d;
DecimalFormat df = new DecimalFormat("0");
df.setMaximumFractionDigits(340);
System.out.println(df.format(myvalue)); // Output: 0,00000021
Using the ENGLISH locale makes sure you get a point for decimal separator, wherever your program will run.
Why using 340 then for setMaximumFractionDigits?
Two reasons:
setMaximumFractionDigits accepts an integer, but its implementation has a maximum digits allowed of DecimalFormat.DOUBLE_FRACTION_DIGITS which equals 340
Double.MIN_VALUE = 4.9E-324 so with 340 digits you are sure not to round your double and lose precision.

You can try it with DecimalFormat. With this class you are very flexible in parsing your numbers.
You can exactly set the pattern you want to use.
In your case for example:
double test = 12345678;
DecimalFormat df = new DecimalFormat("#");
df.setMaximumFractionDigits(0);
System.out.println(df.format(test)); //12345678

I've got another solution involving BigDecimal's toPlainString(), but this time using the String-constructor, which is recommended in the javadoc:
this constructor is compatible with the values returned by Float.toString and Double.toString. This is generally the preferred way to convert a float or double into a BigDecimal, as it doesn't suffer from the unpredictability of the BigDecimal(double) constructor.
It looks like this in its shortest form:
return new BigDecimal(myDouble.toString()).stripTrailingZeros().toPlainString();
NaN and infinite values have to be checked extra, so looks like this in its complete form:
public static String doubleToString(Double d) {
if (d == null)
return null;
if (d.isNaN() || d.isInfinite())
return d.toString();
return new BigDecimal(d.toString()).stripTrailingZeros().toPlainString();
}
This can also be copied/pasted to work nicely with Float.
For Java 7 and below, this results in "0.0" for any zero-valued Doubles, so you would need to add:
if (d.doubleValue() == 0)
return "0";

Java/Kotlin compiler converts any value greater than 9999999 (greater than or equal to 10 million) to scientific notation ie. Epsilion notation.
Ex: 12345678 is converted to 1.2345678E7
Use this code to avoid automatic conversion to scientific notation:
fun setTotalSalesValue(String total) {
var valueWithoutEpsilon = total.toBigDecimal()
/* Set the converted value to your android text view using setText() function */
salesTextView.setText( valueWithoutEpsilon.toPlainString() )
}

This will work as long as your number is a whole number:
double dnexp = 12345678;
System.out.println("dexp: " + (long)dexp);
If the double variable has precision after the decimal point it will truncate it.

I needed to convert some double to currency values and found that most of the solutions were OK, but not for me.
The DecimalFormat was eventually the way for me, so here is what I've done:
public String foo(double value) //Got here 6.743240136E7 or something..
{
DecimalFormat formatter;
if(value - (int)value > 0.0)
formatter = new DecimalFormat("0.00"); // Here you can also deal with rounding if you wish..
else
formatter = new DecimalFormat("0");
return formatter.format(value);
}
As you can see, if the number is natural I get - say - 20000000 instead of 2E7 (etc.) - without any decimal point.
And if it's decimal, I get only two decimal digits.

I think everyone had the right idea, but all answers were not straightforward.
I can see this being a very useful piece of code. Here is a snippet of what will work:
System.out.println(String.format("%.8f", EnterYourDoubleVariableHere));
the ".8" is where you set the number of decimal places you would like to show.
I am using Eclipse and it worked no problem.
Hope this was helpful. I would appreciate any feedback!

The following code detects if the provided number is presented in scientific notation. If so it is represented in normal presentation with a maximum of '25' digits.
static String convertFromScientificNotation(double number) {
// Check if in scientific notation
if (String.valueOf(number).toLowerCase().contains("e")) {
System.out.println("The scientific notation number'"
+ number
+ "' detected, it will be converted to normal representation with 25 maximum fraction digits.");
NumberFormat formatter = new DecimalFormat();
formatter.setMaximumFractionDigits(25);
return formatter.format(number);
} else
return String.valueOf(number);
}

This may be a tangent.... but if you need to put a numerical value as an integer (that is too big to be an integer) into a serializer (JSON, etc.) then you probably want "BigInterger"
Example:
value is a string - 7515904334
We need to represent it as a numerical in a Json message:
{
"contact_phone":"800220-3333",
"servicer_id":7515904334,
"servicer_name":"SOME CORPORATION"
}
We can't print it or we'll get this:
{
"contact_phone":"800220-3333",
"servicer_id":"7515904334",
"servicer_name":"SOME CORPORATION"
}
Adding the value to the node like this produces the desired outcome:
BigInteger.valueOf(Long.parseLong(value, 10))
I'm not sure this is really on-topic, but since this question was my top hit when I searched for my solution, I thought I would share here for the benefit of others, lie me, who search poorly. :D

use String.format ("%.0f", number)
%.0f for zero decimal
String numSring = String.format ("%.0f", firstNumber);
System.out.println(numString);

I had this same problem in my production code when I was using it as a string input to a math.Eval() function which takes a string like "x + 20 / 50"
I looked at hundreds of articles... In the end I went with this because of the speed. And because the Eval function was going to convert it back into its own number format eventually and math.Eval() didn't support the trailing E-07 that other methods returned, and anything over 5 dp was too much detail for my application anyway.
This is now used in production code for an application that has 1,000+ users...
double value = 0.0002111d;
String s = Double.toString(((int)(value * 100000.0d))/100000.0d); // Round to 5 dp
s display as: 0.00021

This will work not only for a whole numbers:
double dexp = 12345678.12345678;
BigDecimal bigDecimal = new BigDecimal(Double.toString(dexp));
System.out.println("dexp: "+ bigDecimal.toPlainString());

My solution:
String str = String.format ("%.0f", yourDouble);

For integer values represented by a double, you can use this code, which is much faster than the other solutions.
public static String doubleToString(final double d) {
// check for integer, also see https://stackoverflow.com/a/9898613/868941 and
// https://github.com/google/guava/blob/master/guava/src/com/google/common/math/DoubleMath.java
if (isMathematicalInteger(d)) {
return Long.toString((long)d);
} else {
// or use any of the solutions provided by others, this is the best
DecimalFormat df =
new DecimalFormat("0", DecimalFormatSymbols.getInstance(Locale.ENGLISH));
df.setMaximumFractionDigits(340); // 340 = DecimalFormat.DOUBLE_FRACTION_DIGITS
return df.format(d);
}
}
// Java 8+
public static boolean isMathematicalInteger(final double d) {
return StrictMath.rint(d) == d && Double.isFinite(d);
}

This works for me. The output will be a String.
String.format("%.12f", myvalue);

Good way to convert scientific e notation
String.valueOf(YourDoubleValue.longValue())

Categories

Resources