I expected this to be very simple and straightforward, but tooltiptext is not showing upon hovering the mouse over. I tried printing the text and it prints correctly. Any comments what I'm doing wrong?
public class gui2 extends JFrame {
private JLabel item1;
public gui2() {
super("The title bar");
setLayout(new FlowLayout());
item1 = new JLabel("label 1");
item1.setToolTipText("This is a message");
String str = item1.getToolTipText();
System.out.println(str);
add(item1);
}
class gui {
public static void main(String[] args) {
gui2 g2 = new gui2();
g2.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
g2.setSize(400, 200);
g2.setVisible(true);
}
}
}
Your code does not compile even if you add the imports. Here is your code corrected and working :
import java.awt.FlowLayout;
import javax.swing.JFrame;
import javax.swing.JLabel;
public class Gui {
public static void main(String[] args) {
Window window = new Window();
window.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
window.setSize(400, 200);
window.setVisible(true);
}
}
class Window extends JFrame {
private static final long serialVersionUID = 1L;
private JLabel jlabel;
public Window() {
super("The title bar");
setLayout(new FlowLayout());
jlabel = new JLabel("label 1");
jlabel.setToolTipText("This is a message");
String str = jlabel.getToolTipText();
System.out.println(str);
add(jlabel);
}
}
As mentioned by #restricteur your code does not compile.
This is due to the fact that your class gui which holds the main(..) is nested within another class, hence no static declaration of method is allowed unless the nested class is marked static. ( I simply moved/un-nested Gui out from Gui2)
Besides that your code does work, I think you are being hasty - hold the mouse over JLabel for like 3-4 seconds and you should see the ToolTip appear:
(using your code with no compilation error of course):
Suggestions on code:
1) Please watch java naming conventions i.e class names should begin with a capital letter and each new word thereafter should also i.e gui becomes Gui or GUI but I prefer the former.
2) Dont call setSize on JFrame use and= appropriate LayoutManager and call pack() on JFrame before setting it visible (but after components have been added).
3) Dont extend JFrame unnecessarily simply create an instance and use that.
4) Always create and manipulate Swing Components on Event Dispatch Thread via SwingUtilities.invokeLater(Runnable r) block.
5) Opt for setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE); unless using Timers as this will allow main(..) to continue regardless if GUI is exited.
Here is code with above fixes:
import java.awt.FlowLayout;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.SwingUtilities;
class Gui2 {
private JLabel item1;
private JFrame frame;
public Gui2() {
frame = new JFrame("The title bar");
frame.setLayout(new FlowLayout());
item1 = new JLabel("label 1");
item1.setToolTipText("This is a message");
String str = item1.getToolTipText();
System.out.println(str);
frame.add(item1);
frame.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
frame.pack();
frame.setVisible(true);
}
}
class Gui {
public static void main(String[] args) {
SwingUtilities.invokeLater(new Runnable() {
#Override
public void run() {
new Gui2();
}
});
}
}
Related
Hey I am a beginner and I have wrote the following code in java, but I can´t click on the JButtons. The program includes three clases - Main, Frame and Actionhandler. My goal was to create a Frame with two buttons: Singleplayer and Mulitplayer. I wanted to test if they work, but I can´t click them. Can anyone help me please?
This is the Main class:
public class Main {
public static void main (String [] args) {
new Frame ();
}
}
This is the Frame class:
import java.awt.Color;
import java.awt.Font;
import java.awt.GridLayout;
import javax.swing.BorderFactory;
import javax.swing.JButton;
import javax.swing.JFrame;
public class Frame extends JFrame {
public static Object multi;
public static Object single;
Frame() {
// Frame
this.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
this.setExtendedState(JFrame.MAXIMIZED_BOTH);
this.setLocationRelativeTo(null);
//Layout in Frame
this.setLayout(new GridLayout(2,1));
this.setVisible(true);
// Buttons in Main Menu
JButton single = new JButton("Singleplayer");
JButton multi = new JButton("Multiplayer");
// specify single button
single.setBounds(200,100,250,80);
single.setForeground(Color.GREEN);
single.setBackground(Color.LIGHT_GRAY);
single.setOpaque(true);
single.setBorder(BorderFactory.createLineBorder(Color.BLACK));
single.setFont(new Font("Comic Sans",Font.BOLD,25));
single.addActionListener(new ActionHandler());
//specify multi button
multi.setBounds(800,100,250,80);
multi.setForeground(Color.GREEN);
multi.setBackground(Color.GRAY);
multi.setOpaque(true);
multi.setFont(new Font("Comic Sans",Font.BOLD,25));
multi.setBorder(BorderFactory.createLineBorder(Color.BLACK));
multi.addActionListener(new ActionHandler());
// add Buttons to Frame
this.add(single);
this.add(multi);
}
}
This is the ActionHandler class:
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
public class ActionHandler implements ActionListener{
#Override
public void actionPerformed(ActionEvent e) {
if(e.getSource() == Frame.multi) {
System.out.println("You have clicked on Singleplayer");
if(e.getSource() == Frame.single) {
System.out.println("You have clicked on Multiplayer");
}
}};
}
You can click on the buttons fine. They just won't do anything because of how you've wired the program:
public class Frame extends JFrame {
public static Object multi; // this is null
public static Object single; // and so is this
Frame() {
// Frame
this.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
this.setExtendedState(JFrame.MAXIMIZED_BOTH);
this.setLocationRelativeTo(null);
//Layout in Frame
this.setLayout(new GridLayout(2,1));
this.setVisible(true);
// Buttons in Main Menu
JButton single = new JButton("Singleplayer"); // this is a new *local* variable
JButton multi = new JButton("Multiplayer"); // and so is this:
You are initializing local variables that have the same name as your static class fields, and you're leaving the same static class fields null, a situation known as "variable shadowing", and so in your listeners, you check if the source is the null static field. Which won't work.
So in your listener:
public void actionPerformed(ActionEvent e) {
if(e.getSource() == Frame.multi) {
You're testing if a null variable is the button that was pressed, and this will not work.
One simple solution is to not re-declare the multi and single variables, to assign your JButtons to these public static fields by changing this:
JButton single = new JButton("Singleplayer");
JButton multi = new JButton("Multiplayer");
to this:
single = new JButton("Singleplayer");
multi = new JButton("Multiplayer");
This would sort-of work. You'd have do do some casting to add these JButton objects to the container since the variables are Object, not JButton. But this would be a bad idea because you'd be throwing out the OOPs baby with the bathwater, discarding encapsulation completely.
Best not to throw out OOPs rules with public static (non-constant) fields and instead work with them. Better to use constant Strings to be passed into your JButtons and then test for them using the ActionEvent's actionCommand property:
public class Frame extends JFrame {
public static String SINGLE_PLAYER = "Single Player";
public static String MULTI_PLAYER = "Multi Player";
Frame() {
// Frame
this.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
this.setExtendedState(JFrame.MAXIMIZED_BOTH);
this.setLocationRelativeTo(null);
//Layout in Frame
this.setLayout(new GridLayout(2,1));
this.setVisible(true);
// Buttons in Main Menu
JButton single = new JButton(SINGLE_PLAYER); // this is a new *local* variable
JButton multi = new JButton(MULTI_PLAYER); // and so is this:
in the listener:
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
public class ActionHandler implements ActionListener{
#Override
public void actionPerformed(ActionEvent e) {
if(e.getActionCommand().equals(Frame.MULTI_PLAYER)) {
System.out.println("You have clicked on Multi Player");
} else {
// ...
}
}};
}
Other problems with your code include:
Don't name your class Frame since this clashes with the name of class in the core Java library, java.awt.Frame. Name it something unique to avoid confusion
Avoid setting bounds, sizes and such. Let the GUI, its layout managers and component preferred sizes do the sizing by calling pack() on the top-level window (JFrame, JDialog,...) after adding components
Call .setVisible(true) on the top-level window after adding all components.
This looks like it will display as a sub-window or dialog window, and you might want to show this portion of the GUI in a modal JDialog, not in a JFrame.
I have 2 jframes, 1 is kinda like the main menu, i want an attribute to change in the level jframe when a button is pressed so i tried:
SpeelVeld frame = new SpeelVeld();
frame.level = 1;
System.out.println(frame.level);
I used the sout to see what really happens because it wasnt working, but i see that the level goes from 0 to 1 back to 0 and goes on and on, does someone know why and how to fix?
SpeelVeld frame = new SpeelVeld();
frame.setBounds(0,0,519,591);
frame.setLocationRelativeTo(null);
frame.getContentPane().setBackground(Color.WHITE);
frame.setTitle("RWINA");
frame.setVisible(true);
frame.setLevel(1);
this is in the main method of my original GameProject file.
How can i make a jdialog
I have 2 jframes, 1 is kinda like the main menu,
You shouldn't use 2 JFrames for this. The dependent sub-window, likely your main menu window, should in fact be a JDialog, probably a non-modal dialog from the looks of it.
I want an attribute to change in the level jframe when a button is pressed so i tried:
SpeelVeld frame = new SpeelVeld();
frame.level = 1;
System.out.println(frame.level);
and here's a big problem. Understand that in this code, you're creating a new SpeelVeld object, the stress being on the word new. Changing the state of this object will have no effect on the other SeelVeld object that is currently being displayed. Do do that, your second window will need a valid reference to the displayed SeelVeld object. How to do this will depend all on code not yet shown, but often it can be done simply by passing in the displayed SpeelVeld object into the main menu object by use of a constructor parameter or setter method.
For example:
import java.awt.Dialog.ModalityType;
import javax.swing.*;
import javax.swing.event.ChangeEvent;
import javax.swing.event.ChangeListener;
// JPanel for our main GUI
public class SpeelVeldFoo {
private static void createAndShowGui() {
// JPanel used by the main JFrame
SpeelVeldPanel speelVeldPanel = new SpeelVeldPanel();
// JPanel used by the main menu JDialog. Pass the above into it
MainMenuPanel mainMenuPanel = new MainMenuPanel(speelVeldPanel);
// create your JFrame
JFrame frame = new JFrame("Speel Veld");
frame.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
frame.getContentPane().add(speelVeldPanel); // add the JPanel
frame.pack();
frame.setLocationByPlatform(true);
frame.setVisible(true);
// create your non-modal JDialog
JDialog menuDialog = new JDialog(frame, "Main Menu", ModalityType.MODELESS);
menuDialog.add(mainMenuPanel); // add the JPanel that holds its "guts"
menuDialog.pack();
menuDialog.setLocationByPlatform(true);
menuDialog.setVisible(true);
}
public static void main(String[] args) {
SwingUtilities.invokeLater(() -> {
createAndShowGui();
});
}
}
#SuppressWarnings("serial")
class SpeelVeldPanel extends JPanel {
private int level = 1; // simple example just has a level int
private JLabel levelLabel = new JLabel("1"); // and displays it in a JLabel
public SpeelVeldPanel() {
add(new JLabel("Level:"));
add(levelLabel);
int ebGap = 50;
setBorder(BorderFactory.createEmptyBorder(ebGap, 2 * ebGap, ebGap, 2 * ebGap));
}
public int getLevel() {
return level;
}
public void setLevel(int level) {
// whenever level is changed, update the display
this.level = level;
levelLabel.setText(String.valueOf(level));
}
}
// class for the JPanel held by the JDialog
#SuppressWarnings("serial")
class MainMenuPanel extends JPanel {
private JSpinner levelSpinner = new JSpinner(new SpinnerNumberModel(1, 1, 5, 1));
private SpeelVeldPanel speelVeldPanel = null; // reference to the main GUI
// note the parameter.... you pass in the displayed main GUI so you can
// change it
public MainMenuPanel(final SpeelVeldPanel speelVeldPanel) {
this.speelVeldPanel = speelVeldPanel; // set the field
// respond when the spinner's data changes
levelSpinner.addChangeListener(new LevelListener());
add(new JLabel("Set the Speel Veld's level:"));
add(levelSpinner);
int ebGap = 10;
setBorder(BorderFactory.createEmptyBorder(ebGap, ebGap, ebGap, ebGap));
}
private class LevelListener implements ChangeListener {
#Override
public void stateChanged(ChangeEvent e) {
// when the spinner's data changes
int level = (int) levelSpinner.getValue(); // get the data
speelVeldPanel.setLevel(level); // and send it to the main GUI
}
}
}
You'll note that I don't like extending JFrame or JDialog if I can avoid it. My feeling is that one can paint oneself into a corner by having your class extend JFrame, forcing you to create and display JFrames, when often more flexibility is called for. More commonly your GUI classes will be geared towards creating JPanels, which can then be placed into JFrames or JDialogs, or JTabbedPanes, or swapped via CardLayouts, wherever needed. This will greatly increase the flexibility of your GUI coding.
You probably want the JFrame to be the top-level container, then have a JPanel that holds your menu. The menu could be whatever you want, I'm using a JTextArea. Then, you need a JButton for the JPanel or JFrame that when pressed, changes the text in the JTextArea. Here is an implementation that you could work from. I'm using the ActionEvent as the trigger for when to mess with the JTextArea:
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JTextArea;
public class SimpleSwing {
public static void main(String[] args) {
JFrame mainFrame = new JFrame();
JPanel mainMenuPanel = new JPanel();
JTextArea textAttribute = new JTextArea("Original Text");
JButton changeAttributeButton = new JButton("Change Attribute");
changeAttributeButton.addActionListener(new ActionListener() {
#Override
public void actionPerformed(ActionEvent e) {
textAttribute.setText("Whatever new text you want");
}
});
mainMenuPanel.add(textAttribute);
mainMenuPanel.add(changeAttributeButton);
mainFrame.add(mainMenuPanel);
mainFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
mainFrame.setSize(500, 500);
mainFrame.setVisible(true);
}
}
I have a problem which is most likely "simple" however I can't figure it out. I am trying to reference my current JFrame so that I can dispose of it, and create a new one, thus "resetting" the program, however I and having trouble figuring out how to reference the JFrame, I have tried, super, this and getParent(), but none of the seem to work. Thanks for any / all help. ^^
Here is my code:
Main Class, just sets up the Jframe and calls the class that creates everything:
public static void main(String args[]) {
JFrame window = new JFrame();
Director director = new Director(window, args);
window.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
window.setLocationRelativeTo(null);
window.pack();
window.setVisible(true);
}
}
Class the creates everything:
import java.awt.Color;
import java.awt.BorderLayout;
import java.awt.GridLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.ButtonGroup;
import javax.swing.JButton;
import javax.swing.JComponent;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JRadioButton;
public class Director extends JFrame implements CollisionListener {
private BrickWall wall;
private JLabel gameTitle, gameScore, gameLives;
private JPanel controlPanel;
private JButton reset, quit;
private JRadioButton hard, normal, easy;
private int score = 6, lives = 5;
private ButtonGroup difficulty;
public Director(JFrame window, String[] args) {
window.getContentPane().add(makeGamePanel(), BorderLayout.CENTER);
window.getContentPane().add(gameControlPanel(), BorderLayout.NORTH);
}
public void collisionDetected(CollisionEvent e) {
wall.setBrick(e.getRow(), e.getColumn(), null);
}
private JComponent makeGamePanel() {
wall = new BrickWall();
wall.addCollisionListener(this);
wall.buildWall(3, 6, 1, wall.getColumns(), Color.GRAY);
return wall;
}
// Reset method I'm trying to dispose of the JFrame in.
private void reset() {
JFrame frame = new JFrame();
frame.getContentPane().add(makeGamePanel(), BorderLayout.CENTER);
frame.getContentPane().add(gameControlPanel(), BorderLayout.NORTH);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.pack();
frame.setVisible(true);
}
private JComponent gameControlPanel() {
// CONTROL PANEL PANEL!
controlPanel = new JPanel();
gameTitle = new JLabel("Brickles");
gameScore = new JLabel("Score:" + " " + score);
gameLives = new JLabel("Lives:" + " " + lives);
reset = new JButton("Reset");
quit = new JButton("Quit");
hard = new JRadioButton("Hard", false);
normal = new JRadioButton("Normal", true);
easy = new JRadioButton("Easy", false);
difficulty = new ButtonGroup();
difficulty.add(hard);
difficulty.add(normal);
difficulty.add(easy);
controlPanel.setLayout(new GridLayout(4, 2));
controlPanel.add(gameTitle);
controlPanel.add(gameScore);
controlPanel.add(hard);
controlPanel.add(gameLives);
controlPanel.add(normal);
controlPanel.add(reset);
controlPanel.add(easy);
controlPanel.add(quit);
// Action Listener, where I'm caling the reset method.
reset.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
reset();
}
});
return controlPanel;
}
}
You can refer to the "outer this" from a nested class with the following syntax:
reset.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
Director.this.reset();
}
});
Yes, you can refer to the outer class by specifying it with the class name as noted in DSquare's good answer (1+ to it), but I urge you not to fling JFrame's at the user as you're program is trying to do. I recommend:
Instead of opening and closing multiple JFrames, use only one JFrame as the main application's window.
If you need helper windows, such as modal windows to get critical information that is absolutely needed, before the program can progress, use modal dialogs such as JDialogs or JOptionPanes.
If you need to swap GUI's, instead of swapping JFrames, swap "views" inside the JFrame via a CardLayout.
Gear your code towards creating these JPanel views and not JFrames as it will make your Swing GUI's much more flexible and portable.
I'm making some test code to practice OOP, and I want to append a JTextArea from the "writeToArea" to the "initialize" method where the JTextArea is defined and initialized. I already tried to directly call the "output" variable, but this returns an "output cannot be resolved" error. I want so that whenever I call the "writeToArea" method in the main class, I'll be able to add lines to the "output" JTextArea in the "initialize" method.
Here's the main class:
public class Pangea {
public static void main(String[] args) {
UI.initialize();
UI.writeToArea();
}
}
Here's the initialize class:
import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.Font;
import javax.swing.JFrame;
import javax.swing.JScrollPane;
import javax.swing.JTextArea;
import javax.swing.JTextField;
public class UI {
static void initialize() {
System.out.println("Initializing GUI.");
JFrame frame = new JFrame();
Font myFont = new Font("Courier", Font.BOLD, 14);
JTextField input = new JTextField("");
JTextArea output = new JTextArea("Initiated Succesfully.");
output.setWrapStyleWord(true);
output.setLineWrap(true);
input.setFont(myFont);
output.setFont(myFont);
input.setForeground(Color.WHITE);
output.setForeground(Color.WHITE);
input.setBackground(Color.BLACK);
input.setCaretColor(Color.WHITE);
output.setBackground(Color.BLACK);
output.setEditable(false);
JScrollPane jp = new JScrollPane(output);
frame.setTitle("PANGEA RPG [0.01 ALPHA][WIP]");
frame.setResizable(false);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.add(input, BorderLayout.SOUTH);
frame.add(jp, BorderLayout.CENTER);
frame.pack();
frame.setSize(800, 500);
frame.setVisible(true);
System.out.println("GUI Initialized.");
}
static void writeToArea() {
System.out.println("\"writeToArea\" running.");
output.append("Hello!");
System.out.println("\"writeToArea\" finished.");
}
}
I've tried to do something similar to this: Updating jtextarea from another class but it didn't work. If anyone has any suggestions I'd be very thankful.
The main error in your code is the lack of OOP design. Making all static is poor design.
Also swing is event based, so you should append text to the textArea when an event happens. See the example i write for you.
public class UI {
private JPanel panel;
private JTextArea output;
public UI(){
initialize();
}
private void initialize() {
panel = new JPanel();
Font myFont = new Font("Courier", Font.BOLD, 14);
final JTextField input = new JTextField(""); // must be declared final cause you use it in anonymous class, you can make it instance variable if you want to as textArea
//add an actionListener then when you press enter this will write to textArea
input.addActionListener(new ActionListener(){
#Override
public void actionPerformed(ActionEvent evt){
writeToArea(input.getText());
}
});
output = new JTextArea("Initiated Succesfully",50,100);// let the component determinate its preferred size.
output.setWrapStyleWord(true);
output.setLineWrap(true);
input.setFont(myFont);
output.setFont(myFont);
input.setForeground(Color.WHITE);
output.setForeground(Color.WHITE);
input.setBackground(Color.BLACK);
input.setCaretColor(Color.WHITE);
output.setBackground(Color.BLACK);
output.setEditable(false);
JScrollPane jp = new JScrollPane(output);
panel.setLayout(new BorderLayout());
panel.add(input, BorderLayout.SOUTH);
panel.add(jp, BorderLayout.CENTER);
}
private void writeToArea(String something) {
System.out.println("\"writeToArea\" running.");
output.append(something);
System.out.println("\"writeToArea\" finished.");
}
public JPanel getPanel(){
return panel;
}
}
And in your client code
public class Pangea {
public static void main(String[] args) {
SwingUtilities.invokeLater(new Runnable(){
#Override
public void run(){
createAndShowGUI();
}
});
}
/**
* Create the GUI and show it. For thread safety,
* this method should be invoked from the
* event dispatch thread.
*/
private static void createAndShowGUI() {
//Create and set up the window.
System.out.println("Initializing GUI.");
JFrame frame = new JFrame();
frame.setTitle("PANGEA RPG [0.01 ALPHA][WIP]");
frame.setResizable(false);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
//Add contents to the window.
frame.add(new UI().getPanel());
frame.pack();//sizes the frame
frame.setVisible(true);
System.out.println("GUI Initialized.");
}
}
Here you have a tutorial with better examples than this How to Use Text Areas
I remove your setSize and use pack()
The pack method sizes the frame so that all its contents are at or
above their preferred sizes. An alternative to pack is
to establish a frame size explicitly by calling setSize or setBounds
(which also sets the frame location). In general, using pack is
preferable to calling setSize, since pack leaves the frame layout
manager in charge of the frame size, and layout managers are good at
adjusting to platform dependencies and other factors that affect
component size.
Read the section from the Swing tutorial on How to Use Text Areas. It will show you how to better structure your code so that you don't use static methods and variables everywhere.
Once you have a panel that has a reference to the text area you can add methods that allow you to update the text area on the panel.
I'm trying to parse String to another frame Using JAVA
i have 2 jFrames. jFrame1 have 1 text field and jFrame 2 have 1 text field. i want to parse jFrame1 text filed's text to jframe2's text field.
It's look like this : But this is not code :(
jFrame2.textfield1.setText(jFrame1.textfield1.gettext());
Anyone know how to parse String to another frame Using JAVA?
Thanks in advance!
Assuming that you have two separate GUIs on the screen at the same time because both textFields have the same reference, each JFrame will be a Object in its own right.
Therefore the only way to access another objects variables is with its methods.
Create a setter method in jFrame2 to change the textField in question.
See Working code below.
import java.awt.*;
import javax.swing.*;
import javax.swing.BoxLayout;
import java.awt.event.*;
public class JframeLink {
public static void main(String[] args)
{
new JframeOneGui();
new JframeTwoGui();
}
//JFrame one Object
public static class JframeOneGui extends JFrame implements ActionListener
{
JPanel jPanelOne = new JPanel();
JTextField textField1 = new JTextField("Message for transfer");
JButton buttonOne = new JButton("Transfer");
public JframeOneGui()
{
//setup swing components
textField1.setSize(100,10);
buttonOne.addActionListener(this);
//setup jPanelOne
jPanelOne.setLayout(new BoxLayout(jPanelOne, 1));
jPanelOne.add(textField1);
jPanelOne.add(buttonOne);
//setup JframeOneGui
this.add("Center",jPanelOne);
this.setLocation(25,25);
this.setTitle("JframeOneGui");
this.setSize(200,200);
this.setResizable(false);
this.setVisible(true);
}
public void actionPerformed(ActionEvent e)
{
if(e.getSource() == buttonOne)
{
//Here we are calling JframeTwoGui's Setter method
JframeTwoGui.setTextFieldOne(textField1.getText());
}
}
}
//JFrame two Object
public static class JframeTwoGui extends JFrame
{
JPanel jPanelOne = new JPanel();
static JTextField textField1 = new JTextField();
public JframeTwoGui()
{
jPanelOne.setLayout(new BoxLayout(jPanelOne, 1));
jPanelOne.add(textField1);
this.add("Center",jPanelOne);
this.setLocation(300,25);
this.setTitle("JframeTwoGui");
this.setSize(200,200);
this.setResizable(false);
this.setVisible(true);
}
//Setter to change TextFieldOne in this Object
public static void setTextFieldOne(String text)
{
textField1.setText(text);
}
}
}