Recently I have encountered some problem which seems a little strange to me.
In order to use some predefined class, I imported two .jar files say foo.jar and bar.jar(Both were written by others)
And my source code is like the following:
package jerry.deque
public class Deque {
.....
.....
Foo item = new Foo(); //Already defined in the foo.jar
.....
}
I added the external library exactly as what How to Import a Jar in Eclipse
did. But when I tried to use the class defined in foo.jar Eclipse shows me that "Foo can't be resolved to a type".
I spent a lot of time to fix this problem and finally succeeded after I removed
the clause: "package jerry.deque" at the beginning of my class file.
I think this is weird because just a few days ago when I was doing some Android development, I followed the same way to add a Twitter API library. And it works fine even when I declared "package jerry.search_twittes" at the beginning of my .java
file. I'm confused by this problem and couldn't figure out what's going wrong. Could someone help me to explain it in detail? Thanks very much.
Check that Foo is same package as Deque class. If they are not same
package, you need to import Foo class in Deque class.
For example,
package jerry.deque;
import packagename.foo; // packagename.foo
public class Deque {
.....
.....
Foo item = new Foo(); //Already defined in the foo.jar
.....
}
Added Explanation
I want you to check access modifier of Foo class carefully.
There are 2 access level for top level(class) access control . These
are public, or package-private (no explicit modifier).
Your Foo class is under default package(not specified package)and may be no explicit access modifier. Hope so! Then, all classes under default package can access to Foo class. That's why when you remove package jerry.deque clause, it works.
Similarly, I want you to check Android development java code in which it works fine even when you declared "package jerry.search_twittes". In that case, classes inside Twitter API library's access modifier is public.So you can access it from anywhere.
For more information you can read this.Is this information helpful???
Foo is in default package. Classes from default package cannot be imported directly.
So when you remove the package declaration in your code, you don't get the error.
You can look for reflection api or write a proxy in the default package for that class.
Related
I'm new in java, please help me to understand this.
I can see there is ReadHtml class and defined with one public method. But when i put this code in ecplise, it shows red mark under WebClient with tag that "this cannot resolved to a type". May I know what does it mean? Gone through all about method definition but couldn't find any remedy to understand this.
Can I get any help ?
public class ReadHtml {
public static LinkedList<String> readJacksonCounty(String urlName, String pStartDate,String pFinishDate)
{
LinkedList<String> xmlListReturn=new LinkedList<String>();
System.getProperties().put("org.apache.commons.logging.simplelog.defaultlog", "error");
final WebClient webClient1 = new WebClient(BrowserVersion.CHROME);
webClient1.setJavaScriptTimeout(60000);
webClient1.getCookieManager().setCookiesEnabled(true);//enable cookies
webClient1.getCache().clear();
You are missing an import of this library:
import com.gargoylesoftware.htmlunit.WebClient;
Add this to the top of your file (and read dsp_user's comment for future reference).
Basically "...cannot be resolved to a type" means that type is not available on the class path. If you're just using eclipse refere to How to import a jar in Eclipse.
If you already added the needed jar onto your class path, you are missing the import statement. Imports just make it so that you dont have to use a class's fully qualified name. (you can type
MyClass myClass;
as opposed to
com.some.package.MyClass myClass;
if you add
import com.some.package.MyClass;
at the top of your file.
Note that if you want to build a jar from your project you'll need some kind of build tool. If you choose to use Maven, which is very common, just read any tutorial on how to get started and manage dependencies.
I would like to reference a class Bag in a JAR file, but Eclipse is telling me that Bag cannot be resolved to a type. I have added the JAR in which Bag is defined to the classpath for the project, but the error is still there. What am I doing wrong?
I think you can't do that, because the Bag class in algs4.jar is inside the default package.
Before J2SE 1.4, we still can import classes from the default package using a syntax like this:
import Unfinished;
But from J2SE 1.5, that's no longer allowed. So if we want to access a default package class from within a packaged class requires moving the default package class into a package of its own. Read here for more detail explanation :
How to access java-classes in the default-package?
Some options you can choose :
Access the class via reflection or some other indirect method. But it is a little bit hard, something like this :
Class fooClass = Class.forName("FooBar");
Method fooMethod = fooClass.getMethod("fooMethod", new Class[] { String.class });
String fooReturned = fooMethod.invoke(fooClass.newInstance(), new String("I did it"));
If you own the source code of that jar library, you need to put it in properly package and wrap it again as a new jar library.
You may need to either fully qualify the Bag class, or import it.
It's a simple class and I am a beginner with Java.
I don't know why this code is not running and why it gives an error :
Could not find or load main class
class tuto{
public static void main(String[] args){
System.out.println("Hello World");
}
}
There are a couple things which jump out at me when I look at your question.
The first thing is that you have unresolved compiler errors. If you see that red 'x' on the Problems tab, you should fix all the errors there before trying to run anything.
The second thing is that your class name doesn't match the file name in which it is defined. For public classes the name of the class and the name of the file must match, and while your class isn't public, this is a widely followed Java convention and you will confuse people if you don't follow it.
As to your actual question, my best guess is that you have placed your class into a package and not declared it as such in your source code. If you go look at the Problems tab, it will tell you what is wrong and (often) how to fix it.
I can approximate your error message if I do the following:
In this case, I have an error over in the Problems tab complaining about the declared package.
Check to see if you have something similar:
If you do, you can right-click the error message and select "Quick Fix", and eclipse will pop up a dialog offering to add the package declaration for you:
In your code there is a compile error, that is because Syteme change it to System
Syteme.out.println("Hello World");
should be
System.out.println("Hello World");
P.S
And in Java when you have a public class in a file, then file name must be that class name. It is a must. Otherwise you will get an error.
If you have this class in a package then you must specify the package declaration first
e.g
package abc;
System.out.println not Syteme.out.println.
In Java (as somebody has already pointed) the name of the file should be of the same name of the main class within the same file.
Moreover, you should also declare an array using this syntax array_type [] array_id and not array_type array_id [].
There might be a couple of problems:
If the class is in a package, make sure you specify it. eg: package com.pak;
The class with main method always needs to be public. public class apples{}
So I have two Jars I want to use in my project from here http://www.jhlabs.com/ip/filters/index.html
I added both CheckFilter and MarbleFilter to my class path. But when I do
CheckFilter();
It says I have to create a method CheckFilter()
I'm pretty sure that's the method I need to call to use that effect. But when I try any of the other methods in the library Jar it still gives me the same thing.
I have no experience with importing/using external libraries. Any help would be great.
checkFilter = new CheckFilter();
CheckFilter();
I tried above and it says I need to create a local variable checkFilter
How are you writing up the code. I will suggest to use eclipse IDE, it will make your tasks simple
If you are using eclipse. You need to do import the jar Filters.jar to your build path
which as you mentioned you downloaded from JHLabs Download page
I found Filters.jar inside dist directory.
Then you will be able to import the class or package
import com.jhlabs.image.*;
OR
import com.jhlabs.image.CheckFilter;
After importing the class or package you will be able to create object to it by
CheckFilter checkFilter = new CheckFilter();
In case you are totally new you can take help from people over IRC or chat and get going.
Someone would be able to quickly help you out
----==----==----==----==----==----==----==----==----
Read your comments and Question again.
You are totally missing the point. If you call to CheckFilter() directly without invoking new keyword, compiler will consider you are trying to access a method which is inside the class you are writing up. and give you error.
As I mentioned above. Your are trying to accessing Instance variable for the class without declaring it. Either do
CheckFilter checkFilter;
before you access checkFilter variable or directly instantiate the class the way I mentioned.
Seems to me you are missing a log of points :D
Methods don't exist without a class. That is probably the constructor to a class. Use
CheckFilter checkFilter = new CheckFilter();
instead. Then call methods on checkFilter.
From #andy-thomas in this similar question
The import statement imports classes from the jar file, not the jar file itself.
An import statement of the form:
import stdlib.*;
will import all the classes in the package stdlib.
Oracle provides this tutorial on importing.
This statement
CheckFilter();
Tries to call a method CheckFilter defined in your class, which is not the case. If this is a utility function, this may be a static method, in which case you can call it like this
ClassName.CheckFilter(); // replace ClassName with the class containing this function
If not, then you may have to instantiate an object
ClassName obj = new ClassName();
obj.CheckFilter();
or skip the object variable
new ClassName().CheckFilter(); // Not prefered
To add jar files, right click on your project in "Package Explorer", go to "Configure Build Path" and then to "Add External Jars".
Set the jar (libraries) into your classpath and use import statements in your java code to include the required Classes.
So, I have something written in Java, and I want to extend it in Scala... The issue I'm running into is that Scala isn't seeing methods I need.
Here is how it's set up:
Player extends Mob, and Mob extends Entity.
I need to access a method in Player that isn't defined in Mob or Entity, but Scala doesn't think it exists even though Java does.
It can see methods defined by Mob and Entity just fine. Also, all the methods I'm talking about are non-static.
So, am I doing something wrong, or is this a limitation imposed by Scala?
Edit --
Here is the relevant code:
package test
import rsca.gs.model.Player
object Test {
def handle(p:Player): Unit = {
p.getActionSender().sendTeleBubble(0, 0, false);
}
}
Player class:
package rsca.gs.model;
// imports
public final class Player extends Mob {
// Implemented methods (not going to post them, as there are quite a few)
// Relevant code
private MiscPacketBuilder actionSender;
public MiscPacketBuilder getActionSender() {
return actionSender;
}
}
Error:
value getActionSender is not a member of rsca.gs.model.Player
I never encountered such problems, and you probably checked your configuration and everything else twice, so I would guess this is some Eclipse related build issue. You should try to build from the command line in order to see whether Scala or Eclipse is the problem.
Is it possible for you to run a test against the class just to see if you got the right one?
p.getClass.getMethods
... and if possible (may run into NPE) in order to find the source:
p.getClass.getProtectionDomain.getCodeSource.getLocation.getPath
When compiling the Scala class, do something like this:
scalac *.scala *.java
This way, Scala will look a the Java code to see what is available. If, however, the Java code is already compiled and provided as a jar file, just add it to the classpath used when compiling the Scala code.