Related
In this case, the MAX is only 5, so I could check the duplicates one by one, but how could I do this in a simpler way? For example, what if the MAX has a value of 20?
Thanks.
int MAX = 5;
for (i = 1 , i <= MAX; i++)
{
drawNum[1] = (int)(Math.random()*MAX)+1;
while (drawNum[2] == drawNum[1])
{
drawNum[2] = (int)(Math.random()*MAX)+1;
}
while ((drawNum[3] == drawNum[1]) || (drawNum[3] == drawNum[2]) )
{
drawNum[3] = (int)(Math.random()*MAX)+1;
}
while ((drawNum[4] == drawNum[1]) || (drawNum[4] == drawNum[2]) || (drawNum[4] == drawNum[3]) )
{
drawNum[4] = (int)(Math.random()*MAX)+1;
}
while ((drawNum[5] == drawNum[1]) ||
(drawNum[5] == drawNum[2]) ||
(drawNum[5] == drawNum[3]) ||
(drawNum[5] == drawNum[4]) )
{
drawNum[5] = (int)(Math.random()*MAX)+1;
}
}
The simplest way would be to create a list of the possible numbers (1..20 or whatever) and then shuffle them with Collections.shuffle. Then just take however many elements you want. This is great if your range is equal to the number of elements you need in the end (e.g. for shuffling a deck of cards).
That doesn't work so well if you want (say) 10 random elements in the range 1..10,000 - you'd end up doing a lot of work unnecessarily. At that point, it's probably better to keep a set of values you've generated so far, and just keep generating numbers in a loop until the next one isn't already present:
if (max < numbersNeeded)
{
throw new IllegalArgumentException("Can't ask for more numbers than are available");
}
Random rng = new Random(); // Ideally just create one instance globally
// Note: use LinkedHashSet to maintain insertion order
Set<Integer> generated = new LinkedHashSet<Integer>();
while (generated.size() < numbersNeeded)
{
Integer next = rng.nextInt(max) + 1;
// As we're adding to a set, this will automatically do a containment check
generated.add(next);
}
Be careful with the set choice though - I've very deliberately used LinkedHashSet as it maintains insertion order, which we care about here.
Yet another option is to always make progress, by reducing the range each time and compensating for existing values. So for example, suppose you wanted 3 values in the range 0..9. On the first iteration you'd generate any number in the range 0..9 - let's say you generate a 4.
On the second iteration you'd then generate a number in the range 0..8. If the generated number is less than 4, you'd keep it as is... otherwise you add one to it. That gets you a result range of 0..9 without 4. Suppose we get 7 that way.
On the third iteration you'd generate a number in the range 0..7. If the generated number is less than 4, you'd keep it as is. If it's 4 or 5, you'd add one. If it's 6 or 7, you'd add two. That way the result range is 0..9 without 4 or 6.
Here's how I'd do it
import java.util.ArrayList;
import java.util.Random;
public class Test {
public static void main(String[] args) {
int size = 20;
ArrayList<Integer> list = new ArrayList<Integer>(size);
for(int i = 1; i <= size; i++) {
list.add(i);
}
Random rand = new Random();
while(list.size() > 0) {
int index = rand.nextInt(list.size());
System.out.println("Selected: "+list.remove(index));
}
}
}
As the esteemed Mr Skeet has pointed out:
If n is the number of randomly selected numbers you wish to choose and N is the total sample space of numbers available for selection:
If n << N, you should just store the numbers that you have picked and check a list to see if the number selected is in it.
If n ~= N, you should probably use my method, by populating a list containing the entire sample space and then removing numbers from it as you select them.
//random numbers are 0,1,2,3
ArrayList<Integer> numbers = new ArrayList<Integer>();
Random randomGenerator = new Random();
while (numbers.size() < 4) {
int random = randomGenerator .nextInt(4);
if (!numbers.contains(random)) {
numbers.add(random);
}
}
This would be a lot simpler in java-8:
Stream.generate(new Random()::ints)
.flatMap(IntStream::boxed)
.distinct()
.limit(16) // whatever limit you might need
.toArray(Integer[]::new);
There is another way of doing "random" ordered numbers with LFSR, take a look at:
http://en.wikipedia.org/wiki/Linear_feedback_shift_register
with this technique you can achieve the ordered random number by index and making sure the values are not duplicated.
But these are not TRUE random numbers because the random generation is deterministic.
But depending your case you can use this technique reducing the amount of processing on random number generation when using shuffling.
Here a LFSR algorithm in java, (I took it somewhere I don't remeber):
public final class LFSR {
private static final int M = 15;
// hard-coded for 15-bits
private static final int[] TAPS = {14, 15};
private final boolean[] bits = new boolean[M + 1];
public LFSR() {
this((int)System.currentTimeMillis());
}
public LFSR(int seed) {
for(int i = 0; i < M; i++) {
bits[i] = (((1 << i) & seed) >>> i) == 1;
}
}
/* generate a random int uniformly on the interval [-2^31 + 1, 2^31 - 1] */
public short nextShort() {
//printBits();
// calculate the integer value from the registers
short next = 0;
for(int i = 0; i < M; i++) {
next |= (bits[i] ? 1 : 0) << i;
}
// allow for zero without allowing for -2^31
if (next < 0) next++;
// calculate the last register from all the preceding
bits[M] = false;
for(int i = 0; i < TAPS.length; i++) {
bits[M] ^= bits[M - TAPS[i]];
}
// shift all the registers
for(int i = 0; i < M; i++) {
bits[i] = bits[i + 1];
}
return next;
}
/** returns random double uniformly over [0, 1) */
public double nextDouble() {
return ((nextShort() / (Integer.MAX_VALUE + 1.0)) + 1.0) / 2.0;
}
/** returns random boolean */
public boolean nextBoolean() {
return nextShort() >= 0;
}
public void printBits() {
System.out.print(bits[M] ? 1 : 0);
System.out.print(" -> ");
for(int i = M - 1; i >= 0; i--) {
System.out.print(bits[i] ? 1 : 0);
}
System.out.println();
}
public static void main(String[] args) {
LFSR rng = new LFSR();
Vector<Short> vec = new Vector<Short>();
for(int i = 0; i <= 32766; i++) {
short next = rng.nextShort();
// just testing/asserting to make
// sure the number doesn't repeat on a given list
if (vec.contains(next))
throw new RuntimeException("Index repeat: " + i);
vec.add(next);
System.out.println(next);
}
}
}
Another approach which allows you to specify how many numbers you want with size and the min and max values of the returned numbers
public static int getRandomInt(int min, int max) {
Random random = new Random();
return random.nextInt((max - min) + 1) + min;
}
public static ArrayList<Integer> getRandomNonRepeatingIntegers(int size, int min,
int max) {
ArrayList<Integer> numbers = new ArrayList<Integer>();
while (numbers.size() < size) {
int random = getRandomInt(min, max);
if (!numbers.contains(random)) {
numbers.add(random);
}
}
return numbers;
}
To use it returning 7 numbers between 0 and 25.
ArrayList<Integer> list = getRandomNonRepeatingIntegers(7, 0, 25);
for (int i = 0; i < list.size(); i++) {
System.out.println("" + list.get(i));
}
The most efficient, basic way to have non-repeating random numbers is explained by this pseudo-code. There is no need to have nested loops or hashed lookups:
// get 5 unique random numbers, possible values 0 - 19
// (assume desired number of selections < number of choices)
const int POOL_SIZE = 20;
const int VAL_COUNT = 5;
declare Array mapping[POOL_SIZE];
declare Array results[VAL_COUNT];
declare i int;
declare r int;
declare max_rand int;
// create mapping array
for (i=0; i<POOL_SIZE; i++) {
mapping[i] = i;
}
max_rand = POOL_SIZE-1; // start loop searching for maximum value (19)
for (i=0; i<VAL_COUNT; i++) {
r = Random(0, max_rand); // get random number
results[i] = mapping[r]; // grab number from map array
mapping[r] = max_rand; // place item past range at selected location
max_rand = max_rand - 1; // reduce random scope by 1
}
Suppose first iteration generated random number 3 to start (from 0 - 19). This would make results[0] = mapping[3], i.e., the value 3. We'd then assign mapping[3] to 19.
In the next iteration, the random number was 5 (from 0 - 18). This would make results[1] = mapping[5], i.e., the value 5. We'd then assign mapping[5] to 18.
Now suppose the next iteration chose 3 again (from 0 - 17). results[2] would be assigned the value of mapping[3], but now, this value is not 3, but 19.
This same protection persists for all numbers, even if you got the same number 5 times in a row. E.g., if the random number generator gave you 0 five times in a row, the results would be: [ 0, 19, 18, 17, 16 ].
You would never get the same number twice.
Generating all the indices of a sequence is generally a bad idea, as it might take a lot of time, especially if the ratio of the numbers to be chosen to MAX is low (the complexity becomes dominated by O(MAX)). This gets worse if the ratio of the numbers to be chosen to MAX approaches one, as then removing the chosen indices from the sequence of all also becomes expensive (we approach O(MAX^2/2)). But for small numbers, this generally works well and is not particularly error-prone.
Filtering the generated indices by using a collection is also a bad idea, as some time is spent in inserting the indices into the sequence, and progress is not guaranteed as the same random number can be drawn several times (but for large enough MAX it is unlikely). This could be close to complexity O(k n log^2(n)/2), ignoring the duplicates and assuming the collection uses a tree for efficient lookup (but with a significant constant cost k of allocating the tree nodes and possibly having to rebalance).
Another option is to generate the random values uniquely from the beginning, guaranteeing progress is being made. That means in the first round, a random index in [0, MAX] is generated:
items i0 i1 i2 i3 i4 i5 i6 (total 7 items)
idx 0 ^^ (index 2)
In the second round, only [0, MAX - 1] is generated (as one item was already selected):
items i0 i1 i3 i4 i5 i6 (total 6 items)
idx 1 ^^ (index 2 out of these 6, but 3 out of the original 7)
The values of the indices then need to be adjusted: if the second index falls in the second half of the sequence (after the first index), it needs to be incremented to account for the gap. We can implement this as a loop, allowing us to select arbitrary number of unique items.
For short sequences, this is quite fast O(n^2/2) algorithm:
void RandomUniqueSequence(std::vector<int> &rand_num,
const size_t n_select_num, const size_t n_item_num)
{
assert(n_select_num <= n_item_num);
rand_num.clear(); // !!
// b1: 3187.000 msec (the fastest)
// b2: 3734.000 msec
for(size_t i = 0; i < n_select_num; ++ i) {
int n = n_Rand(n_item_num - i - 1);
// get a random number
size_t n_where = i;
for(size_t j = 0; j < i; ++ j) {
if(n + j < rand_num[j]) {
n_where = j;
break;
}
}
// see where it should be inserted
rand_num.insert(rand_num.begin() + n_where, 1, n + n_where);
// insert it in the list, maintain a sorted sequence
}
// tier 1 - use comparison with offset instead of increment
}
Where n_select_num is your 5 and n_number_num is your MAX. The n_Rand(x) returns random integers in [0, x] (inclusive). This can be made a bit faster if selecting a lot of items (e.g. not 5 but 500) by using binary search to find the insertion point. To do that, we need to make sure that we meet the requirements.
We will do binary search with the comparison n + j < rand_num[j] which is the same as n < rand_num[j] - j. We need to show that rand_num[j] - j is still a sorted sequence for a sorted sequence rand_num[j]. This is fortunately easily shown, as the lowest distance between two elements of the original rand_num is one (the generated numbers are unique, so there is always difference of at least 1). At the same time, if we subtract the indices j from all the elements rand_num[j], the differences in index are exactly 1. So in the "worst" case, we get a constant sequence - but never decreasing. The binary search can therefore be used, yielding O(n log(n)) algorithm:
struct TNeedle { // in the comparison operator we need to make clear which argument is the needle and which is already in the list; we do that using the type system.
int n;
TNeedle(int _n)
:n(_n)
{}
};
class CCompareWithOffset { // custom comparison "n < rand_num[j] - j"
protected:
std::vector<int>::iterator m_p_begin_it;
public:
CCompareWithOffset(std::vector<int>::iterator p_begin_it)
:m_p_begin_it(p_begin_it)
{}
bool operator ()(const int &r_value, TNeedle n) const
{
size_t n_index = &r_value - &*m_p_begin_it;
// calculate index in the array
return r_value < n.n + n_index; // or r_value - n_index < n.n
}
bool operator ()(TNeedle n, const int &r_value) const
{
size_t n_index = &r_value - &*m_p_begin_it;
// calculate index in the array
return n.n + n_index < r_value; // or n.n < r_value - n_index
}
};
And finally:
void RandomUniqueSequence(std::vector<int> &rand_num,
const size_t n_select_num, const size_t n_item_num)
{
assert(n_select_num <= n_item_num);
rand_num.clear(); // !!
// b1: 3578.000 msec
// b2: 1703.000 msec (the fastest)
for(size_t i = 0; i < n_select_num; ++ i) {
int n = n_Rand(n_item_num - i - 1);
// get a random number
std::vector<int>::iterator p_where_it = std::upper_bound(rand_num.begin(), rand_num.end(),
TNeedle(n), CCompareWithOffset(rand_num.begin()));
// see where it should be inserted
rand_num.insert(p_where_it, 1, n + p_where_it - rand_num.begin());
// insert it in the list, maintain a sorted sequence
}
// tier 4 - use binary search
}
I have tested this on three benchmarks. First, 3 numbers were chosen out of 7 items, and a histogram of the items chosen was accumulated over 10,000 runs:
4265 4229 4351 4267 4267 4364 4257
This shows that each of the 7 items was chosen approximately the same number of times, and there is no apparent bias caused by the algorithm. All the sequences were also checked for correctness (uniqueness of contents).
The second benchmark involved choosing 7 numbers out of 5000 items. The time of several versions of the algorithm was accumulated over 10,000,000 runs. The results are denoted in comments in the code as b1. The simple version of the algorithm is slightly faster.
The third benchmark involved choosing 700 numbers out of 5000 items. The time of several versions of the algorithm was again accumulated, this time over 10,000 runs. The results are denoted in comments in the code as b2. The binary search version of the algorithm is now more than two times faster than the simple one.
The second method starts being faster for choosing more than cca 75 items on my machine (note that the complexity of either algorithm does not depend on the number of items, MAX).
It is worth mentioning that the above algorithms generate the random numbers in ascending order. But it would be simple to add another array to which the numbers would be saved in the order in which they were generated, and returning that instead (at negligible additional cost O(n)). It is not necessary to shuffle the output: that would be much slower.
Note that the sources are in C++, I don't have Java on my machine, but the concept should be clear.
EDIT:
For amusement, I have also implemented the approach that generates a list with all the indices 0 .. MAX, chooses them randomly and removes them from the list to guarantee uniqueness. Since I've chosen quite high MAX (5000), the performance is catastrophic:
// b1: 519515.000 msec
// b2: 20312.000 msec
std::vector<int> all_numbers(n_item_num);
std::iota(all_numbers.begin(), all_numbers.end(), 0);
// generate all the numbers
for(size_t i = 0; i < n_number_num; ++ i) {
assert(all_numbers.size() == n_item_num - i);
int n = n_Rand(n_item_num - i - 1);
// get a random number
rand_num.push_back(all_numbers[n]); // put it in the output list
all_numbers.erase(all_numbers.begin() + n); // erase it from the input
}
// generate random numbers
I have also implemented the approach with a set (a C++ collection), which actually comes second on benchmark b2, being only about 50% slower than the approach with the binary search. That is understandable, as the set uses a binary tree, where the insertion cost is similar to binary search. The only difference is the chance of getting duplicate items, which slows down the progress.
// b1: 20250.000 msec
// b2: 2296.000 msec
std::set<int> numbers;
while(numbers.size() < n_number_num)
numbers.insert(n_Rand(n_item_num - 1)); // might have duplicates here
// generate unique random numbers
rand_num.resize(numbers.size());
std::copy(numbers.begin(), numbers.end(), rand_num.begin());
// copy the numbers from a set to a vector
Full source code is here.
Your problem seems to reduce to choose k elements at random from a collection of n elements. The Collections.shuffle answer is thus correct, but as pointed out inefficient: its O(n).
Wikipedia: Fisher–Yates shuffle has a O(k) version when the array already exists. In your case, there is no array of elements and creating the array of elements could be very expensive, say if max were 10000000 instead of 20.
The shuffle algorithm involves initializing an array of size n where every element is equal to its index, picking k random numbers each number in a range with the max one less than the previous range, then swapping elements towards the end of the array.
You can do the same operation in O(k) time with a hashmap although I admit its kind of a pain. Note that this is only worthwhile if k is much less than n. (ie k ~ lg(n) or so), otherwise you should use the shuffle directly.
You will use your hashmap as an efficient representation of the backing array in the shuffle algorithm. Any element of the array that is equal to its index need not appear in the map. This allows you to represent an array of size n in constant time, there is no time spent initializing it.
Pick k random numbers: the first is in the range 0 to n-1, the second 0 to n-2, the third 0 to n-3 and so on, thru n-k.
Treat your random numbers as a set of swaps. The first random index swaps to the final position. The second random index swaps to the second to last position. However, instead of working against a backing array, work against your hashmap. Your hashmap will store every item that is out of position.
int getValue(i)
{
if (map.contains(i))
return map[i];
return i;
}
void setValue(i, val)
{
if (i == val)
map.remove(i);
else
map[i] = val;
}
int[] chooseK(int n, int k)
{
for (int i = 0; i < k; i++)
{
int randomIndex = nextRandom(0, n - i); //(n - i is exclusive)
int desiredIndex = n-i-1;
int valAtRandom = getValue(randomIndex);
int valAtDesired = getValue(desiredIndex);
setValue(desiredIndex, valAtRandom);
setValue(randomIndex, valAtDesired);
}
int[] output = new int[k];
for (int i = 0; i < k; i++)
{
output[i] = (getValue(n-i-1));
}
return output;
}
You could use one of the classes implementing the Set interface (API), and then each number you generate, use Set.add() to insert it.
If the return value is false, you know the number has already been generated before.
Instead of doing all this create a LinkedHashSet object and random numbers to it by Math.random() function .... if any duplicated entry occurs the LinkedHashSet object won't add that number to its List ... Since in this Collection Class no duplicate values are allowed .. in the end u get a list of random numbers having no duplicated values .... :D
With Java 8 upwards you can use the ints method from the IntStream interface:
Returns an effectively unlimited stream of pseudorandom int values.
Random r = new Random();
int randomNumberOrigin = 0;
int randomNumberBound = 10;
int size = 5;
int[] unique = r.ints(randomNumberOrigin, randomNumberBound)
.distinct()
.limit(size)
.toArray();
Following code create a sequence random number between [1,m] that was not generated before.
public class NewClass {
public List<Integer> keys = new ArrayList<Integer>();
public int rand(int m) {
int n = (int) (Math.random() * m + 1);
if (!keys.contains(n)) {
keys.add(n);
return n;
} else {
return rand(m);
}
}
public static void main(String[] args) {
int m = 4;
NewClass ne = new NewClass();
for (int i = 0; i < 4; i++) {
System.out.println(ne.rand(m));
}
System.out.println("list: " + ne.keys);
}
}
The most easy way is use nano DateTime as long format.
System.nanoTime();
There is algorithm of card batch: you create ordered array of numbers (the "card batch") and in every iteration you select a number at random position from it (removing the selected number from the "card batch" of course).
Here is an efficient solution for fast creation of a randomized array. After randomization you can simply pick the n-th element e of the array, increment n and return e. This solution has O(1) for getting a random number and O(n) for initialization, but as a tradeoff requires a good amount of memory if n gets large enough.
There is a more efficient and less cumbersome solution for integers than a Collections.shuffle.
The problem is the same as successively picking items from only the un-picked items in a set and setting them in order somewhere else. This is exactly like randomly dealing cards or drawing winning raffle tickets from a hat or bin.
This algorithm works for loading any array and achieving a random order at the end of the load. It also works for adding into a List collection (or any other indexed collection) and achieving a random sequence in the collection at the end of the adds.
It can be done with a single array, created once, or a numerically ordered collectio, such as a List, in place. For an array, the initial array size needs to be the exact size to contain all the intended values. If you don't know how many values might occur in advance, using a numerically orderred collection, such as an ArrayList or List, where the size is not immutable, will also work. It will work universally for an array of any size up to Integer.MAX_VALUE which is just over 2,000,000,000. List objects will have the same index limits. Your machine may run out of memory before you get to an array of that size. It may be more efficient to load an array typed to the object types and convert it to some collection, after loading the array. This is especially true if the target collection is not numerically indexed.
This algorithm, exactly as written, will create a very even distribution where there are no duplicates. One aspect that is VERY IMPORTANT is that it has to be possible for the insertion of the next item to occur up to the current size + 1. Thus, for the second item, it could be possible to store it in location 0 or location 1. For the 20th item, it could be possible to store it in any location, 0 through 19. It is just as possible the first item to stay in location 0 as it is for it to end up in any other location. It is just as possible for the next new item to go anywhere, including the next new location.
The randomness of the sequence will be as random as the randomness of the random number generator.
This algorithm can also be used to load reference types into random locations in an array. Since this works with an array, it can also work with collections. That means you don't have to create the collection and then shuffle it or have it ordered on whatever orders the objects being inserted. The collection need only have the ability to insert an item anywhere in the collection or append it.
// RandomSequence.java
import java.util.Random;
public class RandomSequence {
public static void main(String[] args) {
// create an array of the size and type for which
// you want a random sequence
int[] randomSequence = new int[20];
Random randomNumbers = new Random();
for (int i = 0; i < randomSequence.length; i++ ) {
if (i == 0) { // seed first entry in array with item 0
randomSequence[i] = 0;
} else { // for all other items...
// choose a random pointer to the segment of the
// array already containing items
int pointer = randomNumbers.nextInt(i + 1);
randomSequence[i] = randomSequence[pointer];
randomSequence[pointer] = i;
// note that if pointer & i are equal
// the new value will just go into location i and possibly stay there
// this is VERY IMPORTANT to ensure the sequence is really random
// and not biased
} // end if...else
} // end for
for (int number: randomSequence) {
System.out.printf("%2d ", number);
} // end for
} // end main
} // end class RandomSequence
It really all depends on exactly WHAT you need the random generation for, but here's my take.
First, create a standalone method for generating the random number.
Be sure to allow for limits.
public static int newRandom(int limit){
return generatedRandom.nextInt(limit); }
Next, you will want to create a very simple decision structure that compares values. This can be done in one of two ways. If you have a very limited amount of numbers to verify, a simple IF statement will suffice:
public static int testDuplicates(int int1, int int2, int int3, int int4, int int5){
boolean loopFlag = true;
while(loopFlag == true){
if(int1 == int2 || int1 == int3 || int1 == int4 || int1 == int5 || int1 == 0){
int1 = newRandom(75);
loopFlag = true; }
else{
loopFlag = false; }}
return int1; }
The above compares int1 to int2 through int5, as well as making sure that there are no zeroes in the randoms.
With these two methods in place, we can do the following:
num1 = newRandom(limit1);
num2 = newRandom(limit1);
num3 = newRandom(limit1);
num4 = newRandom(limit1);
num5 = newRandom(limit1);
Followed By:
num1 = testDuplicates(num1, num2, num3, num4, num5);
num2 = testDuplicates(num2, num1, num3, num4, num5);
num3 = testDuplicates(num3, num1, num2, num4, num5);
num4 = testDuplicates(num4, num1, num2, num3, num5);
num5 = testDuplicates(num5, num1, num2, num3, num5);
If you have a longer list to verify, then a more complex method will yield better results both in clarity of code and in processing resources.
Hope this helps. This site has helped me so much, I felt obliged to at least TRY to help as well.
I created a snippet that generates no duplicate random integer. the advantage of this snippet is that you can assign the list of an array to it and generate the random item, too.
No duplication random generator class
With Java 8 using the below code, you can create 10 distinct random Integer Numbers within a range of 1000.
Random random = new Random();
Integer[] input9 = IntStream.range(1, 10).map(i -> random.nextInt(1000)).boxed().distinct()
.toArray(Integer[]::new);
System.out.println(Arrays.toString(input9));
Modify the range to generate more numbers example : range(1,X). It will generate X distinct random numbers.
Modify the nextInt value to select the random number range : random.nextInt(Y)::random number will be generated within the range Y
I got this interview question and I am still very confused about it.
The question was as the title suggest, i'll explain.
You are given a random creation function to use.
the function input is an integer n. let's say I call it with 3.
it should give me a permutation of the numbers from 1 - 3. so for example it will give me 2, 3 , 1.
after i call the function again, it won't give me the same permutation, now it will give me 1, 2, 3 for example.
Now if i will call it with n = 4. I may get 1,4,3,2.
Calling it with 3 again will not output 2,3,1 nor 1,2,3 as was outputed before, it will give me a different permutation out of the 3! possible permutations.
I was confused about this question there and I still am now. How is this possible within normal running time ? As I see it, there has to be some static variable that remembers what was called before or after the function finishes executing.
So my thought is creating a static hashtable (key,value) that gets the input as key and the value is an array of the length of the n!.
Then we use the random method to output a random instance out of these and move this instance to the back, so it will not be called again, thus keeping the output unique.
The space time complexity seems huge to me.
Am I missing something in this question ?
Jonathan Rosenne's answer was downvoted because it was link-only, but it is still the right answer in my opinion, being that this is such a well-known problem. You can also see a minimal explanation in wikipedia: https://en.wikipedia.org/wiki/Permutation#Generation_in_lexicographic_order.
To address your space-complexity concern, generating permutations in lexicographical ordering has O(1) space complexity, you don't need to store nothing other than the current permutation. The algorithm is quite simple, but most of all, its correctness is quite intuitive. Imagine you had the set of all permutations and you order them lexicographically. Advancing to the next in order and then cycling back will give you the maximum cycle without repetitions. The problem with that is again the space-complexity, since you would need to store all possible permutations; the algorithm gives you a way to get the next permutation without storing anything. It may take a while to understand, but once I got it it was quite enlightening.
You can store a static variable as a seed for the next permutation
In this case, we can change which slot each number will be put in with an int (for example this is hard coded to sets of 4 numbers)
private static int seed = 0;
public static int[] generate()
{
//s is a copy of seed, and increment seed for the next generation
int s = seed++ & 0x7FFFFFFF; //ensure s is positive
int[] out = new int[4];
//place 4-2
for(int i = out.length; i > 1; i--)
{
int pos = s % i;
s /= i;
for(int j = 0; j < out.length; j++)
if(out[j] == 0)
if(pos-- == 0)
{
out[j] = i;
break;
}
}
//place 1 in the last spot open
for(int i = 0; i < out.length; i++)
if(out[i] == 0)
{
out[i] = 1;
break;
}
return out;
}
Here's a version that takes the size as an input, and uses a HashMap to store the seeds
private static Map<Integer, Integer> seeds = new HashMap<Integer, Integer>();
public static int[] generate(int size)
{
//s is a copy of seed, and increment seed for the next generation
int s = seeds.containsKey(size) ? seeds.get(size) : 0; //can replace 0 with a Math.random() call to seed randomly
seeds.put(size, s + 1);
s &= 0x7FFFFFFF; //ensure s is positive
int[] out = new int[size];
//place numbers 2+
for(int i = out.length; i > 1; i--)
{
int pos = s % i;
s /= i;
for(int j = 0; j < out.length; j++)
if(out[j] == 0)
if(pos-- == 0)
{
out[j] = i;
break;
}
}
//place 1 in the last spot open
for(int i = 0; i < out.length; i++)
if(out[i] == 0)
{
out[i] = 1;
break;
}
return out;
}
This method works because the seed stores the locations of each element to be placed
For size 4:
Get the lowest digit in base 4, since there are 4 slots remaining
Place a 4 in that slot
Shift the number to remove the data used (divide by 4)
Get the lowest digit in base 3, since there are 3 slots remaining
Place a 3 in that slot
Shift the number to remove the data used (divide by 3)
Get the lowest digit in base 2, since there are 2 slots remaining
Place a 2 in that slot
Shift the number to remove the data used (divide by 2)
There is only one slot remaining
Place a 1 in that slot
This method is expandable up to 12! for ints, 13! overflows, or 20! for longs (21! overflows)
If you need to use bigger numbers, you may be able to replace the seeds with BigIntegers
int num = 10;
Random rand = new Random();
int ran = rand.nextInt(num);
if (ran==0){
ran= ran+1;
}
System.out.println("random : "+ran);
This is what i have coded so far, is there a better way to do this? I feel that this is hard coding when random is 0, I added 1.
The problem with that code is that 1 is twice as likely as other numbers (as your effective result is 1 when nextInt() returns 0 or 1).
The best solution is to just always add 1 and request random numbers from a smaller range:
int rnd = rand.nextInt(num - 1) + 1;
I guess you are trying to get a random number between 1 and 'num'.
a more generic way can be :
int Low = 1;
int High = 10;
int R = r.nextInt(High-Low) + Low;
This gives you a random number in between 1 (inclusive) and 10 (exclusive). ( or use High=11 for 10 inclusive)
Random random = new Random();
int ran = random.nextInt(9) + 1; //10 is maxRandom value for this code. 1-10
you also could do the following:
int randomNumber = 0;
do {
randomNumber = rand.nextInt(maxValue);
} while(randomNumber == 0);
Try this:
int num,max=10,min=1;
Random r=new Random();
num=r.nextInt(max-min)+1;
You'll need this import at the beginning of your file:
import java.util.Random;
Just lower the bound (num variable) by 1 and add 1 to the ran variable
int num = 10;
Random rand = new Random();
int ran = rand.nextInt(num - 1) + 1;
// or decrease num first n-- and then int ran = rand.nextInt(num) + 1
now the bound(limit) is 8 (inclusive for example, the final number is always exclusive) and if it comes 0, it will increase to 1 and if it comes 8, it will increase to 9, which was originally supposed to be the bound.
Don't expect this functionality from Random and do it yourself as you should. One can do pretty much anything with the result - multiply, add (e.g. 2*nextInt(n)+1 for random odd number), use logarithmic scale for musical note frequencies, use a map or enum to obtain random objects ...
Method nextInt(n) is here only to give you n different values (from 0 to n-1). Don't ask more of it, implement the rest by yourself. If I understand your question well, you require numbers 1..9, so you should ask for nextInt(9)+1 to get 0..8 and then add 1.
I hope this explanation helps, I saw many answers, but I didn't like the explanation in any of them.
Try:
int num = 10;
Random rand = new Random();
int ran = rand.nextInt(num) + 1;
class fibo {
//int firstNumber = 0;
public static void main(String args[]){
//int firstNumber = 0;
int length = 4000000;
int[] series = new int[length];
//long[] sum = new long[4000000];
long sum =0;
series[0] = 0;
series[1] = 1;
for (int i = 2; i<4000000; i++){
//firstNumber = firstNumber + i;
//System.out.println("fibo" + i);
series[i] = series[i-1] + series[i-2];
if(series[i] %2 == 0) {
sum = sum + series[i];
}
}
for(int j=0;j<length; j++){
System.out.println("fibo Series" + series[j]);
}
}
}
I got the answer, but the approach was different. What's wrong with this code?. Can anyone give an insight on this.
The same code works when the length is 10. I am not getting any expection on this, but the answer seems to be different. Its something -92719184589087346 which is incorrect.
What's wrong with this code?
Well it's taking the sum of the even numbers within the first four million Fibonacci numbers, not the even numbers within the sequence of Fibonacci numbers less than four million.
It's also creating an array of all the Fibonacci numbers it's seen, for no reason: you only ever need the last two at a time, so you can do that in constant space.
I'm guessing you are trying to get the sum where the sum is less than 4million? because that isn't what you are calculating. You are calculating the sum at the 4 millionth index which is completely different.
The reason your answer is wrong (besides your logic being wrong) is that a long can't fit the number you are calculating. The 4 millionth entry in the fibonacci sequence is some number so incredibly large that it is overflowing your long. The overflow will make it wrap back into the negatives (probably multiple times).
In this case, the MAX is only 5, so I could check the duplicates one by one, but how could I do this in a simpler way? For example, what if the MAX has a value of 20?
Thanks.
int MAX = 5;
for (i = 1 , i <= MAX; i++)
{
drawNum[1] = (int)(Math.random()*MAX)+1;
while (drawNum[2] == drawNum[1])
{
drawNum[2] = (int)(Math.random()*MAX)+1;
}
while ((drawNum[3] == drawNum[1]) || (drawNum[3] == drawNum[2]) )
{
drawNum[3] = (int)(Math.random()*MAX)+1;
}
while ((drawNum[4] == drawNum[1]) || (drawNum[4] == drawNum[2]) || (drawNum[4] == drawNum[3]) )
{
drawNum[4] = (int)(Math.random()*MAX)+1;
}
while ((drawNum[5] == drawNum[1]) ||
(drawNum[5] == drawNum[2]) ||
(drawNum[5] == drawNum[3]) ||
(drawNum[5] == drawNum[4]) )
{
drawNum[5] = (int)(Math.random()*MAX)+1;
}
}
The simplest way would be to create a list of the possible numbers (1..20 or whatever) and then shuffle them with Collections.shuffle. Then just take however many elements you want. This is great if your range is equal to the number of elements you need in the end (e.g. for shuffling a deck of cards).
That doesn't work so well if you want (say) 10 random elements in the range 1..10,000 - you'd end up doing a lot of work unnecessarily. At that point, it's probably better to keep a set of values you've generated so far, and just keep generating numbers in a loop until the next one isn't already present:
if (max < numbersNeeded)
{
throw new IllegalArgumentException("Can't ask for more numbers than are available");
}
Random rng = new Random(); // Ideally just create one instance globally
// Note: use LinkedHashSet to maintain insertion order
Set<Integer> generated = new LinkedHashSet<Integer>();
while (generated.size() < numbersNeeded)
{
Integer next = rng.nextInt(max) + 1;
// As we're adding to a set, this will automatically do a containment check
generated.add(next);
}
Be careful with the set choice though - I've very deliberately used LinkedHashSet as it maintains insertion order, which we care about here.
Yet another option is to always make progress, by reducing the range each time and compensating for existing values. So for example, suppose you wanted 3 values in the range 0..9. On the first iteration you'd generate any number in the range 0..9 - let's say you generate a 4.
On the second iteration you'd then generate a number in the range 0..8. If the generated number is less than 4, you'd keep it as is... otherwise you add one to it. That gets you a result range of 0..9 without 4. Suppose we get 7 that way.
On the third iteration you'd generate a number in the range 0..7. If the generated number is less than 4, you'd keep it as is. If it's 4 or 5, you'd add one. If it's 6 or 7, you'd add two. That way the result range is 0..9 without 4 or 6.
Here's how I'd do it
import java.util.ArrayList;
import java.util.Random;
public class Test {
public static void main(String[] args) {
int size = 20;
ArrayList<Integer> list = new ArrayList<Integer>(size);
for(int i = 1; i <= size; i++) {
list.add(i);
}
Random rand = new Random();
while(list.size() > 0) {
int index = rand.nextInt(list.size());
System.out.println("Selected: "+list.remove(index));
}
}
}
As the esteemed Mr Skeet has pointed out:
If n is the number of randomly selected numbers you wish to choose and N is the total sample space of numbers available for selection:
If n << N, you should just store the numbers that you have picked and check a list to see if the number selected is in it.
If n ~= N, you should probably use my method, by populating a list containing the entire sample space and then removing numbers from it as you select them.
//random numbers are 0,1,2,3
ArrayList<Integer> numbers = new ArrayList<Integer>();
Random randomGenerator = new Random();
while (numbers.size() < 4) {
int random = randomGenerator .nextInt(4);
if (!numbers.contains(random)) {
numbers.add(random);
}
}
This would be a lot simpler in java-8:
Stream.generate(new Random()::ints)
.flatMap(IntStream::boxed)
.distinct()
.limit(16) // whatever limit you might need
.toArray(Integer[]::new);
There is another way of doing "random" ordered numbers with LFSR, take a look at:
http://en.wikipedia.org/wiki/Linear_feedback_shift_register
with this technique you can achieve the ordered random number by index and making sure the values are not duplicated.
But these are not TRUE random numbers because the random generation is deterministic.
But depending your case you can use this technique reducing the amount of processing on random number generation when using shuffling.
Here a LFSR algorithm in java, (I took it somewhere I don't remeber):
public final class LFSR {
private static final int M = 15;
// hard-coded for 15-bits
private static final int[] TAPS = {14, 15};
private final boolean[] bits = new boolean[M + 1];
public LFSR() {
this((int)System.currentTimeMillis());
}
public LFSR(int seed) {
for(int i = 0; i < M; i++) {
bits[i] = (((1 << i) & seed) >>> i) == 1;
}
}
/* generate a random int uniformly on the interval [-2^31 + 1, 2^31 - 1] */
public short nextShort() {
//printBits();
// calculate the integer value from the registers
short next = 0;
for(int i = 0; i < M; i++) {
next |= (bits[i] ? 1 : 0) << i;
}
// allow for zero without allowing for -2^31
if (next < 0) next++;
// calculate the last register from all the preceding
bits[M] = false;
for(int i = 0; i < TAPS.length; i++) {
bits[M] ^= bits[M - TAPS[i]];
}
// shift all the registers
for(int i = 0; i < M; i++) {
bits[i] = bits[i + 1];
}
return next;
}
/** returns random double uniformly over [0, 1) */
public double nextDouble() {
return ((nextShort() / (Integer.MAX_VALUE + 1.0)) + 1.0) / 2.0;
}
/** returns random boolean */
public boolean nextBoolean() {
return nextShort() >= 0;
}
public void printBits() {
System.out.print(bits[M] ? 1 : 0);
System.out.print(" -> ");
for(int i = M - 1; i >= 0; i--) {
System.out.print(bits[i] ? 1 : 0);
}
System.out.println();
}
public static void main(String[] args) {
LFSR rng = new LFSR();
Vector<Short> vec = new Vector<Short>();
for(int i = 0; i <= 32766; i++) {
short next = rng.nextShort();
// just testing/asserting to make
// sure the number doesn't repeat on a given list
if (vec.contains(next))
throw new RuntimeException("Index repeat: " + i);
vec.add(next);
System.out.println(next);
}
}
}
Another approach which allows you to specify how many numbers you want with size and the min and max values of the returned numbers
public static int getRandomInt(int min, int max) {
Random random = new Random();
return random.nextInt((max - min) + 1) + min;
}
public static ArrayList<Integer> getRandomNonRepeatingIntegers(int size, int min,
int max) {
ArrayList<Integer> numbers = new ArrayList<Integer>();
while (numbers.size() < size) {
int random = getRandomInt(min, max);
if (!numbers.contains(random)) {
numbers.add(random);
}
}
return numbers;
}
To use it returning 7 numbers between 0 and 25.
ArrayList<Integer> list = getRandomNonRepeatingIntegers(7, 0, 25);
for (int i = 0; i < list.size(); i++) {
System.out.println("" + list.get(i));
}
The most efficient, basic way to have non-repeating random numbers is explained by this pseudo-code. There is no need to have nested loops or hashed lookups:
// get 5 unique random numbers, possible values 0 - 19
// (assume desired number of selections < number of choices)
const int POOL_SIZE = 20;
const int VAL_COUNT = 5;
declare Array mapping[POOL_SIZE];
declare Array results[VAL_COUNT];
declare i int;
declare r int;
declare max_rand int;
// create mapping array
for (i=0; i<POOL_SIZE; i++) {
mapping[i] = i;
}
max_rand = POOL_SIZE-1; // start loop searching for maximum value (19)
for (i=0; i<VAL_COUNT; i++) {
r = Random(0, max_rand); // get random number
results[i] = mapping[r]; // grab number from map array
mapping[r] = max_rand; // place item past range at selected location
max_rand = max_rand - 1; // reduce random scope by 1
}
Suppose first iteration generated random number 3 to start (from 0 - 19). This would make results[0] = mapping[3], i.e., the value 3. We'd then assign mapping[3] to 19.
In the next iteration, the random number was 5 (from 0 - 18). This would make results[1] = mapping[5], i.e., the value 5. We'd then assign mapping[5] to 18.
Now suppose the next iteration chose 3 again (from 0 - 17). results[2] would be assigned the value of mapping[3], but now, this value is not 3, but 19.
This same protection persists for all numbers, even if you got the same number 5 times in a row. E.g., if the random number generator gave you 0 five times in a row, the results would be: [ 0, 19, 18, 17, 16 ].
You would never get the same number twice.
Generating all the indices of a sequence is generally a bad idea, as it might take a lot of time, especially if the ratio of the numbers to be chosen to MAX is low (the complexity becomes dominated by O(MAX)). This gets worse if the ratio of the numbers to be chosen to MAX approaches one, as then removing the chosen indices from the sequence of all also becomes expensive (we approach O(MAX^2/2)). But for small numbers, this generally works well and is not particularly error-prone.
Filtering the generated indices by using a collection is also a bad idea, as some time is spent in inserting the indices into the sequence, and progress is not guaranteed as the same random number can be drawn several times (but for large enough MAX it is unlikely). This could be close to complexity O(k n log^2(n)/2), ignoring the duplicates and assuming the collection uses a tree for efficient lookup (but with a significant constant cost k of allocating the tree nodes and possibly having to rebalance).
Another option is to generate the random values uniquely from the beginning, guaranteeing progress is being made. That means in the first round, a random index in [0, MAX] is generated:
items i0 i1 i2 i3 i4 i5 i6 (total 7 items)
idx 0 ^^ (index 2)
In the second round, only [0, MAX - 1] is generated (as one item was already selected):
items i0 i1 i3 i4 i5 i6 (total 6 items)
idx 1 ^^ (index 2 out of these 6, but 3 out of the original 7)
The values of the indices then need to be adjusted: if the second index falls in the second half of the sequence (after the first index), it needs to be incremented to account for the gap. We can implement this as a loop, allowing us to select arbitrary number of unique items.
For short sequences, this is quite fast O(n^2/2) algorithm:
void RandomUniqueSequence(std::vector<int> &rand_num,
const size_t n_select_num, const size_t n_item_num)
{
assert(n_select_num <= n_item_num);
rand_num.clear(); // !!
// b1: 3187.000 msec (the fastest)
// b2: 3734.000 msec
for(size_t i = 0; i < n_select_num; ++ i) {
int n = n_Rand(n_item_num - i - 1);
// get a random number
size_t n_where = i;
for(size_t j = 0; j < i; ++ j) {
if(n + j < rand_num[j]) {
n_where = j;
break;
}
}
// see where it should be inserted
rand_num.insert(rand_num.begin() + n_where, 1, n + n_where);
// insert it in the list, maintain a sorted sequence
}
// tier 1 - use comparison with offset instead of increment
}
Where n_select_num is your 5 and n_number_num is your MAX. The n_Rand(x) returns random integers in [0, x] (inclusive). This can be made a bit faster if selecting a lot of items (e.g. not 5 but 500) by using binary search to find the insertion point. To do that, we need to make sure that we meet the requirements.
We will do binary search with the comparison n + j < rand_num[j] which is the same as n < rand_num[j] - j. We need to show that rand_num[j] - j is still a sorted sequence for a sorted sequence rand_num[j]. This is fortunately easily shown, as the lowest distance between two elements of the original rand_num is one (the generated numbers are unique, so there is always difference of at least 1). At the same time, if we subtract the indices j from all the elements rand_num[j], the differences in index are exactly 1. So in the "worst" case, we get a constant sequence - but never decreasing. The binary search can therefore be used, yielding O(n log(n)) algorithm:
struct TNeedle { // in the comparison operator we need to make clear which argument is the needle and which is already in the list; we do that using the type system.
int n;
TNeedle(int _n)
:n(_n)
{}
};
class CCompareWithOffset { // custom comparison "n < rand_num[j] - j"
protected:
std::vector<int>::iterator m_p_begin_it;
public:
CCompareWithOffset(std::vector<int>::iterator p_begin_it)
:m_p_begin_it(p_begin_it)
{}
bool operator ()(const int &r_value, TNeedle n) const
{
size_t n_index = &r_value - &*m_p_begin_it;
// calculate index in the array
return r_value < n.n + n_index; // or r_value - n_index < n.n
}
bool operator ()(TNeedle n, const int &r_value) const
{
size_t n_index = &r_value - &*m_p_begin_it;
// calculate index in the array
return n.n + n_index < r_value; // or n.n < r_value - n_index
}
};
And finally:
void RandomUniqueSequence(std::vector<int> &rand_num,
const size_t n_select_num, const size_t n_item_num)
{
assert(n_select_num <= n_item_num);
rand_num.clear(); // !!
// b1: 3578.000 msec
// b2: 1703.000 msec (the fastest)
for(size_t i = 0; i < n_select_num; ++ i) {
int n = n_Rand(n_item_num - i - 1);
// get a random number
std::vector<int>::iterator p_where_it = std::upper_bound(rand_num.begin(), rand_num.end(),
TNeedle(n), CCompareWithOffset(rand_num.begin()));
// see where it should be inserted
rand_num.insert(p_where_it, 1, n + p_where_it - rand_num.begin());
// insert it in the list, maintain a sorted sequence
}
// tier 4 - use binary search
}
I have tested this on three benchmarks. First, 3 numbers were chosen out of 7 items, and a histogram of the items chosen was accumulated over 10,000 runs:
4265 4229 4351 4267 4267 4364 4257
This shows that each of the 7 items was chosen approximately the same number of times, and there is no apparent bias caused by the algorithm. All the sequences were also checked for correctness (uniqueness of contents).
The second benchmark involved choosing 7 numbers out of 5000 items. The time of several versions of the algorithm was accumulated over 10,000,000 runs. The results are denoted in comments in the code as b1. The simple version of the algorithm is slightly faster.
The third benchmark involved choosing 700 numbers out of 5000 items. The time of several versions of the algorithm was again accumulated, this time over 10,000 runs. The results are denoted in comments in the code as b2. The binary search version of the algorithm is now more than two times faster than the simple one.
The second method starts being faster for choosing more than cca 75 items on my machine (note that the complexity of either algorithm does not depend on the number of items, MAX).
It is worth mentioning that the above algorithms generate the random numbers in ascending order. But it would be simple to add another array to which the numbers would be saved in the order in which they were generated, and returning that instead (at negligible additional cost O(n)). It is not necessary to shuffle the output: that would be much slower.
Note that the sources are in C++, I don't have Java on my machine, but the concept should be clear.
EDIT:
For amusement, I have also implemented the approach that generates a list with all the indices 0 .. MAX, chooses them randomly and removes them from the list to guarantee uniqueness. Since I've chosen quite high MAX (5000), the performance is catastrophic:
// b1: 519515.000 msec
// b2: 20312.000 msec
std::vector<int> all_numbers(n_item_num);
std::iota(all_numbers.begin(), all_numbers.end(), 0);
// generate all the numbers
for(size_t i = 0; i < n_number_num; ++ i) {
assert(all_numbers.size() == n_item_num - i);
int n = n_Rand(n_item_num - i - 1);
// get a random number
rand_num.push_back(all_numbers[n]); // put it in the output list
all_numbers.erase(all_numbers.begin() + n); // erase it from the input
}
// generate random numbers
I have also implemented the approach with a set (a C++ collection), which actually comes second on benchmark b2, being only about 50% slower than the approach with the binary search. That is understandable, as the set uses a binary tree, where the insertion cost is similar to binary search. The only difference is the chance of getting duplicate items, which slows down the progress.
// b1: 20250.000 msec
// b2: 2296.000 msec
std::set<int> numbers;
while(numbers.size() < n_number_num)
numbers.insert(n_Rand(n_item_num - 1)); // might have duplicates here
// generate unique random numbers
rand_num.resize(numbers.size());
std::copy(numbers.begin(), numbers.end(), rand_num.begin());
// copy the numbers from a set to a vector
Full source code is here.
Your problem seems to reduce to choose k elements at random from a collection of n elements. The Collections.shuffle answer is thus correct, but as pointed out inefficient: its O(n).
Wikipedia: Fisher–Yates shuffle has a O(k) version when the array already exists. In your case, there is no array of elements and creating the array of elements could be very expensive, say if max were 10000000 instead of 20.
The shuffle algorithm involves initializing an array of size n where every element is equal to its index, picking k random numbers each number in a range with the max one less than the previous range, then swapping elements towards the end of the array.
You can do the same operation in O(k) time with a hashmap although I admit its kind of a pain. Note that this is only worthwhile if k is much less than n. (ie k ~ lg(n) or so), otherwise you should use the shuffle directly.
You will use your hashmap as an efficient representation of the backing array in the shuffle algorithm. Any element of the array that is equal to its index need not appear in the map. This allows you to represent an array of size n in constant time, there is no time spent initializing it.
Pick k random numbers: the first is in the range 0 to n-1, the second 0 to n-2, the third 0 to n-3 and so on, thru n-k.
Treat your random numbers as a set of swaps. The first random index swaps to the final position. The second random index swaps to the second to last position. However, instead of working against a backing array, work against your hashmap. Your hashmap will store every item that is out of position.
int getValue(i)
{
if (map.contains(i))
return map[i];
return i;
}
void setValue(i, val)
{
if (i == val)
map.remove(i);
else
map[i] = val;
}
int[] chooseK(int n, int k)
{
for (int i = 0; i < k; i++)
{
int randomIndex = nextRandom(0, n - i); //(n - i is exclusive)
int desiredIndex = n-i-1;
int valAtRandom = getValue(randomIndex);
int valAtDesired = getValue(desiredIndex);
setValue(desiredIndex, valAtRandom);
setValue(randomIndex, valAtDesired);
}
int[] output = new int[k];
for (int i = 0; i < k; i++)
{
output[i] = (getValue(n-i-1));
}
return output;
}
You could use one of the classes implementing the Set interface (API), and then each number you generate, use Set.add() to insert it.
If the return value is false, you know the number has already been generated before.
Instead of doing all this create a LinkedHashSet object and random numbers to it by Math.random() function .... if any duplicated entry occurs the LinkedHashSet object won't add that number to its List ... Since in this Collection Class no duplicate values are allowed .. in the end u get a list of random numbers having no duplicated values .... :D
With Java 8 upwards you can use the ints method from the IntStream interface:
Returns an effectively unlimited stream of pseudorandom int values.
Random r = new Random();
int randomNumberOrigin = 0;
int randomNumberBound = 10;
int size = 5;
int[] unique = r.ints(randomNumberOrigin, randomNumberBound)
.distinct()
.limit(size)
.toArray();
Following code create a sequence random number between [1,m] that was not generated before.
public class NewClass {
public List<Integer> keys = new ArrayList<Integer>();
public int rand(int m) {
int n = (int) (Math.random() * m + 1);
if (!keys.contains(n)) {
keys.add(n);
return n;
} else {
return rand(m);
}
}
public static void main(String[] args) {
int m = 4;
NewClass ne = new NewClass();
for (int i = 0; i < 4; i++) {
System.out.println(ne.rand(m));
}
System.out.println("list: " + ne.keys);
}
}
The most easy way is use nano DateTime as long format.
System.nanoTime();
There is algorithm of card batch: you create ordered array of numbers (the "card batch") and in every iteration you select a number at random position from it (removing the selected number from the "card batch" of course).
Here is an efficient solution for fast creation of a randomized array. After randomization you can simply pick the n-th element e of the array, increment n and return e. This solution has O(1) for getting a random number and O(n) for initialization, but as a tradeoff requires a good amount of memory if n gets large enough.
There is a more efficient and less cumbersome solution for integers than a Collections.shuffle.
The problem is the same as successively picking items from only the un-picked items in a set and setting them in order somewhere else. This is exactly like randomly dealing cards or drawing winning raffle tickets from a hat or bin.
This algorithm works for loading any array and achieving a random order at the end of the load. It also works for adding into a List collection (or any other indexed collection) and achieving a random sequence in the collection at the end of the adds.
It can be done with a single array, created once, or a numerically ordered collectio, such as a List, in place. For an array, the initial array size needs to be the exact size to contain all the intended values. If you don't know how many values might occur in advance, using a numerically orderred collection, such as an ArrayList or List, where the size is not immutable, will also work. It will work universally for an array of any size up to Integer.MAX_VALUE which is just over 2,000,000,000. List objects will have the same index limits. Your machine may run out of memory before you get to an array of that size. It may be more efficient to load an array typed to the object types and convert it to some collection, after loading the array. This is especially true if the target collection is not numerically indexed.
This algorithm, exactly as written, will create a very even distribution where there are no duplicates. One aspect that is VERY IMPORTANT is that it has to be possible for the insertion of the next item to occur up to the current size + 1. Thus, for the second item, it could be possible to store it in location 0 or location 1. For the 20th item, it could be possible to store it in any location, 0 through 19. It is just as possible the first item to stay in location 0 as it is for it to end up in any other location. It is just as possible for the next new item to go anywhere, including the next new location.
The randomness of the sequence will be as random as the randomness of the random number generator.
This algorithm can also be used to load reference types into random locations in an array. Since this works with an array, it can also work with collections. That means you don't have to create the collection and then shuffle it or have it ordered on whatever orders the objects being inserted. The collection need only have the ability to insert an item anywhere in the collection or append it.
// RandomSequence.java
import java.util.Random;
public class RandomSequence {
public static void main(String[] args) {
// create an array of the size and type for which
// you want a random sequence
int[] randomSequence = new int[20];
Random randomNumbers = new Random();
for (int i = 0; i < randomSequence.length; i++ ) {
if (i == 0) { // seed first entry in array with item 0
randomSequence[i] = 0;
} else { // for all other items...
// choose a random pointer to the segment of the
// array already containing items
int pointer = randomNumbers.nextInt(i + 1);
randomSequence[i] = randomSequence[pointer];
randomSequence[pointer] = i;
// note that if pointer & i are equal
// the new value will just go into location i and possibly stay there
// this is VERY IMPORTANT to ensure the sequence is really random
// and not biased
} // end if...else
} // end for
for (int number: randomSequence) {
System.out.printf("%2d ", number);
} // end for
} // end main
} // end class RandomSequence
It really all depends on exactly WHAT you need the random generation for, but here's my take.
First, create a standalone method for generating the random number.
Be sure to allow for limits.
public static int newRandom(int limit){
return generatedRandom.nextInt(limit); }
Next, you will want to create a very simple decision structure that compares values. This can be done in one of two ways. If you have a very limited amount of numbers to verify, a simple IF statement will suffice:
public static int testDuplicates(int int1, int int2, int int3, int int4, int int5){
boolean loopFlag = true;
while(loopFlag == true){
if(int1 == int2 || int1 == int3 || int1 == int4 || int1 == int5 || int1 == 0){
int1 = newRandom(75);
loopFlag = true; }
else{
loopFlag = false; }}
return int1; }
The above compares int1 to int2 through int5, as well as making sure that there are no zeroes in the randoms.
With these two methods in place, we can do the following:
num1 = newRandom(limit1);
num2 = newRandom(limit1);
num3 = newRandom(limit1);
num4 = newRandom(limit1);
num5 = newRandom(limit1);
Followed By:
num1 = testDuplicates(num1, num2, num3, num4, num5);
num2 = testDuplicates(num2, num1, num3, num4, num5);
num3 = testDuplicates(num3, num1, num2, num4, num5);
num4 = testDuplicates(num4, num1, num2, num3, num5);
num5 = testDuplicates(num5, num1, num2, num3, num5);
If you have a longer list to verify, then a more complex method will yield better results both in clarity of code and in processing resources.
Hope this helps. This site has helped me so much, I felt obliged to at least TRY to help as well.
I created a snippet that generates no duplicate random integer. the advantage of this snippet is that you can assign the list of an array to it and generate the random item, too.
No duplication random generator class
With Java 8 using the below code, you can create 10 distinct random Integer Numbers within a range of 1000.
Random random = new Random();
Integer[] input9 = IntStream.range(1, 10).map(i -> random.nextInt(1000)).boxed().distinct()
.toArray(Integer[]::new);
System.out.println(Arrays.toString(input9));
Modify the range to generate more numbers example : range(1,X). It will generate X distinct random numbers.
Modify the nextInt value to select the random number range : random.nextInt(Y)::random number will be generated within the range Y