Develop Reference

read a huge amount of data

In a java program (Eclipse ISE on a PC) I want to read a huge amount of data (around 1640188 bytes) from a web site. With Wireshark I can see that these datas come in many blocks of 1460 bytes.
When I use the following code I read only the first block seen at high level (size around 18000 bytes). How could I do to have the other blocks?
URLConnection con = url.openConnection();
InputStream input = con.getInputStream();
while(input.available()>0)
{
System.out.println(input.available());
int n = input.available();
byte[] mydataTab = new byte[n];
input.read(mydataTab, 0, n);
String str = new String(mydataTab);
memoData += str;
}

First:
Do not
int n = input.available();
byte[] mydataTab = new byte[n];
because:
Note that while some implementations of InputStream will return the
total number of bytes in the stream, many will not. It is never
correct to use the return value of this method to allocate a buffer
intended to hold all data in this stream.
Java InputStream Documentation
Second:
Try to use some predefined chunck size for your reading, so you can do:
int chuncksize = 1024;
int sizeRead = input.read(mydataTab, 0, n);
where the sizeRead is the amount of bytes that you read.
And keep reading the chunks until the end of the streaming.

Java Reading large files into byte array chunk by chunk

So I've been trying to make a small program that inputs a file into a byte array, then it will turn that byte array into hex, then binary. It will then play with the binary values (I haven't thought of what to do when I get to this stage) and then save it as a custom file.
I studied a lot of internet code and I can turn a file into a byte array and into hex, but the problem is I can't turn huge files into byte arrays (out of memory).
This is the code that is not a complete failure
public void rundis(Path pp) {
byte bb[] = null;
try {
bb = Files.readAllBytes(pp); //Files.toByteArray(pathhold);
System.out.println("byte array made");
} catch (Exception e) {
e.printStackTrace();
}
if (bb.length != 0 || bb != null) {
System.out.println("byte array filled");
//send to method to turn into hex
} else {
System.out.println("byte array NOT filled");
}
}
I know how the process should go, but I don't know how to code that properly.
The process if you are interested:
Input file using File
Read the chunk by chunk of the file into a byte array. Ex. each byte array record hold 600 bytes
Send that chunk to be turned into a Hex value --> Integer.tohexstring
Send that hex value chunk to be made into a binary value --> Integer.toBinarystring
Mess around with the Binary value
Save to custom file line by line
Problem:: I don't know how to turn a huge file into a byte array chunk by chunk to be processed.
Any and all help will be appreciated, thank you for reading :)

To chunk your input use a FileInputStream:
Path pp = FileSystems.getDefault().getPath("logs", "access.log");
final int BUFFER_SIZE = 1024*1024; //this is actually bytes
FileInputStream fis = new FileInputStream(pp.toFile());
byte[] buffer = new byte[BUFFER_SIZE];
int read = 0;
while( ( read = fis.read( buffer ) ) > 0 ){
// call your other methodes here...
}
fis.close();

To stream a file, you need to step away from Files.readAllBytes(). It's a nice utility for small files, but as you noticed not so much for large files.
In pseudocode it would look something like this:
while there are more bytes available
read some bytes
process those bytes
(write the result back to a file, if needed)
In Java, you can use a FileInputStream to read a file byte by byte or chunk by chunk. Lets say we want to write back our processed bytes. First we open the files:
FileInputStream is = new FileInputStream(new File("input.txt"));
FileOutputStream os = new FileOutputStream(new File("output.txt"));
We need the FileOutputStream to write back our results - we don't want to just drop our precious processed data, right? Next we need a buffer which holds a chunk of bytes:
byte[] buf = new byte[4096];
How many bytes is up to you, I kinda like chunks of 4096 bytes. Then we need to actually read some bytes
int read = is.read(buf);
this will read up to buf.length bytes and store them in buf. It will return the total bytes read. Then we process the bytes:
//Assuming the processing function looks like this:
//byte[] process(byte[] data, int bytes);
byte[] ret = process(buf, read);
process() in above example is your processing method. It takes in a byte-array, the number of bytes it should process and returns the result as byte-array.
Last, we write the result back to a file:
os.write(ret);
We have to execute this in a loop until there are no bytes left in the file, so lets write a loop for it:
int read = 0;
while((read = is.read(buf)) > 0) {
byte[] ret = process(buf, read);
os.write(ret);
}
and finally close the streams
is.close();
os.close();
And thats it. We processed the file in 4096-byte chunks and wrote the result back to a file. It's up to you what to do with the result, you could also send it over TCP or even drop it if it's not needed, or even read from TCP instead of a file, the basic logic is the same.
This still needs some proper error-handling to work around missing files or wrong permissions but that's up to you to implement that.
A example implementation for the process method:
//returns the hex-representation of the bytes
public static byte[] process(byte[] bytes, int length) {
final char[] hexchars = "0123456789ABCDEF".toCharArray();
char[] ret = new char[length * 2];
for ( int i = 0; i < length; ++i) {
int b = bytes[i] & 0xFF;
ret[i * 2] = hexchars[b >>> 4];
ret[i * 2 + 1] = hexchars[b & 0x0F];
}
return ret;
}

java: read large binary file

I need to read out a given large file that contains 500000001 binaries. Afterwards I have to translate them into ASCII.
My Problem occurs while trying to store the binaries in a large array. I get the warning at the definition of the array ioBuf:
"The literal 16000000032 of type int is out of range."
I have no clue how to save these numbers to work with them! Has somebody an idea?
Here is my code:
public byte[] read(){
try{
BufferedInputStream in = new BufferedInputStream(new FileInputStream("data.dat"));
ByteArrayOutputStream bs = new ByteArrayOutputStream();
BufferedOutputStream out = new BufferedOutputStream(bs);
byte[] ioBuf = new byte[16000000032];
int bytesRead;
while ((bytesRead = in.read(ioBuf)) != -1){
out.write(ioBuf, 0, bytesRead);
}
out.close();
in.close();
return bs.toByteArray();
}

The maximum Index of an Array is Integer.MAX_VALUE and 16000000032 is greater than Integer.MAX_VALUE
Integer.MAX_VALUE = 2^31-1 = 2147483647
2147483647 < 16000000032
You could overcome this by checking if the Array is full and create another and continue reading.
But i'm not quite sure if your approach is the best way to perform this. byte[Integer_MAX_VALUE] is huge ;)
Maybe you can split the input file in smaller chunks process them.
EDIT: This is how you could read a single int of your file. You can resize the buffer's size to the amount of data you want to read. But you tried to read the whole file at once.
//Allocate buffer with 4byte = 32bit = Integer.SIZE
byte[] ioBuf = new byte[4];
int bytesRead;
while ((bytesRead = in.read(ioBuf)) != -1){
//if bytesRead == 4 you read 1 int
//do your stuff
}

If you need to declare a large constant, append an 'L' to it which indicates to the compiler that is a long constant. However, as mentioned in another answer you can't declare arrays that large.
I suspect the purpose of the exercise is to learn how to use the java.nio.Buffer family of classes.

I made some progress by starting from scratch! But I still have a problem.
My idea is to read up the first 32 bytes, convert them to a int number. Then the next 32 bytes etc. Unfortunately I just get the first and don't know how to proceed.
I discovered following method for converting these numbers to int:
public static int byteArrayToInt(byte[] b){
final ByteBuffer bb = ByteBuffer.wrap(b);
bb.order(ByteOrder.LITTLE_ENDIAN);
return bb.getInt();
}
so now I have:
BufferedInputStream in=null;
byte[] buf = new byte[32];
try {
in = new BufferedInputStream(new FileInputStream("ndata.dat"));
in.read(buf);
System.out.println(byteArrayToInt(buf));
in.close();
} catch (IOException e) {
System.out.println("error while reading ndata.dat file");
}

Byte [] used as a BufferInputStream ok but

Ok I know a buffer is actually an array of byte, however I have never seen the following declaration (taken from here)
URLConnection con = new URL("http://maps...").openConnection();
InputStream is = con.getInputStream();
byte bytes[] = new byte[con.getContentLength()];
is.read(bytes);
Is it the right way to avoid using a BufferInputStream object? Here we have an unbuffered stream reading from a byte []? should not be the other way around?
thanks in advance.

No, it is not the right way. Method read() reads up to N bytes where N is the length of your array. It can read less bytes (even 0) if no more byte are available. Number of bytes that have been read is returned by method read(). When end of stream is reached the method returns -1.
Therefore the right way is to read bytes in loop:
byte[] buf = new buf[MAX];
int n = 0;
while ((n = stream.read(buf)) >= 0) {
// deal with n first bytes from buf
}

or use Apache commons-io
InputStream is;
byte[] bytes = IOUtils.toByteArray(is);

Reading a binary input stream into a single byte array in Java

The documentation says that one should not use available() method to determine the size of an InputStream. How can I read the whole content of an InputStream into a byte array?
InputStream in; //assuming already present
byte[] data = new byte[in.available()];
in.read(data);//now data is filled with the whole content of the InputStream
I could read multiple times into a buffer of a fixed size, but then, I will have to combine the data I read into a single byte array, which is a problem for me.

The simplest approach IMO is to use Guava and its ByteStreams class:
byte[] bytes = ByteStreams.toByteArray(in);
Or for a file:
byte[] bytes = Files.toByteArray(file);
Alternatively (if you didn't want to use Guava), you could create a ByteArrayOutputStream, and repeatedly read into a byte array and write into the ByteArrayOutputStream (letting that handle resizing), then call ByteArrayOutputStream.toByteArray().
Note that this approach works whether you can tell the length of your input or not - assuming you have enough memory, of course.

Please keep in mind that the answers here assume that the length of the file is less than or equal to Integer.MAX_VALUE(2147483647).
If you are reading in from a file, you can do something like this:
File file = new File("myFile");
byte[] fileData = new byte[(int) file.length()];
DataInputStream dis = new DataInputStream(new FileInputStream(file));
dis.readFully(fileData);
dis.close();
UPDATE (May 31, 2014):
Java 7 adds some new features in the java.nio.file package that can be used to make this example a few lines shorter. See the readAllBytes() method in the java.nio.file.Files class. Here is a short example:
import java.nio.file.FileSystems;
import java.nio.file.Files;
import java.nio.file.Path;
// ...
Path p = FileSystems.getDefault().getPath("", "myFile");
byte [] fileData = Files.readAllBytes(p);
Android has support for this starting in Api level 26 (8.0.0, Oreo).

You can use Apache commons-io for this task:
Refer to this method:
public static byte[] readFileToByteArray(File file) throws IOException
Update:
Java 7 way:
byte[] bytes = Files.readAllBytes(Paths.get(filename));
and if it is a text file and you want to convert it to String (change encoding as needed):
StandardCharsets.UTF_8.decode(ByteBuffer.wrap(bytes)).toString()

You can read it by chunks (byte buffer[] = new byte[2048]) and write the chunks to a ByteArrayOutputStream. From the ByteArrayOutputStream you can retrieve the contents as a byte[], without needing to determine its size beforehand.

I believe buffer length needs to be specified, as memory is finite and you may run out of it
Example:
InputStream in = new FileInputStream(strFileName);
long length = fileFileName.length();
if (length > Integer.MAX_VALUE) {
throw new IOException("File is too large!");
}
byte[] bytes = new byte[(int) length];
int offset = 0;
int numRead = 0;
while (offset < bytes.length && (numRead = in.read(bytes, offset, bytes.length - offset)) >= 0) {
offset += numRead;
}
if (offset < bytes.length) {
throw new IOException("Could not completely read file " + fileFileName.getName());
}
in.close();

Max value for array index is Integer.MAX_INT - it's around 2Gb (2^31 / 2 147 483 647).
Your input stream can be bigger than 2Gb, so you have to process data in chunks, sorry.
InputStream is;
final byte[] buffer = new byte[512 * 1024 * 1024]; // 512Mb
while(true) {
final int read = is.read(buffer);
if ( read < 0 ) {
break;
}
// do processing
}