Develop Reference

Reg Ex strictly match word start with a pattern

I'm trying to extract a text after a sequence. But I have multiple sequences. the regex should ideally match first occurrence of any of these sequences.
my sequences are
PIN, PIN :, PIN IN, PIN IN:, PIN OUT,PIN OUT :
So I came up with the below regex
(PIN)(\sOUT|\sIN)?\:?\s*
It is doing the job except that the regex is also matching strings like
quote lupin in, pippin etc.
My question is how can I strictly select the string that match the pattern being the whole word
note: I tried ^(PIN)(\sOUT|\sON)?\:?\s* but of no use.
I'm new to java, any help is appreciated

It’s always recommended to have the documentation at hand when using regular expressions.
There, under Boundary matchers we find:
\b          A word boundary
So you may use the pattern \bPIN(\sOUT|\sIN)?:?\s* to enforce that PIN matches at the beginning of a word only, i.e. stands at the beginning of a string/line or is preceded by non-word characters like space or punctuation. A boundary only matches a position, rather than characters, so if a preceding non-word character makes this a word boundary, the character still is not part of the match.
Note that the first (…) grouping was unnecessary for the literal match PIN, further the colon : has no special meaning and doesn’t need to be escaped.

Restrict consecutive characters using Java Regex

I need to allow alphanumeric characters , "?","." , "/" and "-" in the given string. But I need to restrict consecutive - only.
For example:
www.google.com/flights-usa should be valid
www.google.com/flights--usa should be invalid
currently I'm using ^[a-zA-Z0-9\\/\\.\\?\\_\\-]+$.
Please suggest me how to restrict consecutive - only.

You may use grouping with quantifiers:
^[a-zA-Z0-9/.?_]+(?:-[a-zA-Z0-9/.?_]+)*$
See the regex demo
Details:
^ - start of string
[a-zA-Z0-9/.?_]+ - 1 or more characters from the set defined in the character class (can be replaced with [\w/.?]+)
(?:-[a-zA-Z0-9/.?_]+)* - zero or more sequences ((?:...)*) of:
- - hyphen
[a-zA-Z0-9/.?_]+ - see above
$ - end of string.
Or use a negative lookahead:
^(?!.*--)[a-zA-Z0-9/.?_-]+$
^^^^^^^^^
See the demo here
Details:
^ - start of string
(?!.*--) - a negative lookahead that will fail the match once the regex engine finds a -- substring after any 0+ chars other than a newline
[a-zA-Z0-9/.?_-]+ - 1 or more chars from the set defined in the character class
$ - end of string.
Note that [a-zA-Z0-9_] = \w if you do not use the Pattern.UNICODE_CHARACTER_CLASS flag. So, the first would look like "^[\\w/.?]+(?:-[\\w/.?]+)*$" and the second as "^(?!.*--)[\\w/.?-]+$".

One approach is to restrict multiple dashes with negative look-behind on a dash, like this:
^(?:[a-zA-Z0-9\/\.\?\_]|(?<!-)-)+$
The right side of the |, i.e. (?<!-)-, means "a dash, unless preceded by another dash".
Demo.

I'm not sure of the efficiency of this, but I believe this should work.
^([a-zA-Z0-9\/\.\?\_]|\-([^\-]|$))+$
For each character, this regex checks if it can match [a-zA-Z0-9\/\.\?\_], which is everything you included in your regex except the hyphen. If that does not match, it instead tries to match \-([^\-]|$), which matches a hyphen not followed by another hyphen, or a hyphen at the end of the string.
Here's a demo.

capture all characters between match character (single or repeated) on string

I'm trying to extract the string preceding a specific character (even when character is repeated, like this (ie: underscore '_'):
this_is_my_example_line_0
this_is_my_example_line_1_
this_is_my_example_line_2___
_this_is_my_ _example_line_3_
__this_is_my___example_line_4__
and after running my regex I should get this (the regex should ignore the any instances of the matching character in the middle of the string):
this_is_my_example_line_0
this_is_my_example_line_1
this_is_my_example_line_2
this_is_my_ _example_line_3
this_is_my___example_line_4
In other words I'm trying to 'trim' the matched character(s) at the beginning and end of string.
I'm trying to use a Regex in Java to accomplish this, my idea is to capture the group of characters between the special character(s) at the end or beginning of the line.
So far I can only do this successfully for example 3 with this regexp:
/[^_]+|_+(.*)[_$]+|_$+/
[^_]+ not 'underscore' once or more
| OR
_+ underscore once or more
(.*) capture all characters
[_$]+ not 'underscore' once or more followed by end of line
|_$+ OR 'underscore' once or more followed by end of line
I just realized that this excludes the first word of the message on example 0,1,2 since the string doesn't start with underscore and it only starts matching after finding a underscore..
Is there an easier way not involving regex?
I don't really care about the first character (although it would be nice) I only need to ignore the repeating character at the end.. it looks that (by this regex tester) just doing this, would work? /()_+$/ the empty parenthesis matches anything before a single or repeting matches at the end of the line.. would that be correct?
Thank you!

There are a couple of options here, you could either replace matches of ^_+|_+$ with an empty string, or extract the contents of the first capture group from the match of ^_*(.*?)_*$. Note that if your strings may be multiple lines and you want to perform the replacement on each line then you will need to use the Pattern.MULTILINE flag for either approach. If your strings may be multiple lines and you only want to replacement to occur at the very beginning and end, don't use Pattern.MULTILINE but use Pattern.DOTALL for the second approach.
For example: http://regexr.com?355ff

How about [^_\n\r](.*[^_\n\r])??
Demo
String data=
"this_is_my_example_line_0\n" +
"this_is_my_example_line_1_\n" +
"this_is_my_example_line_2___\n" +
"_this_is_my_ _example_line_3_\n" +
"__this_is_my___example_line_4__";
Pattern p=Pattern.compile("[^_\n\r](.*[^_\n\r])?");
Matcher m=p.matcher(data);
while(m.find()){
System.out.println(m.group());
}
output:
this_is_my_example_line_0
this_is_my_example_line_1
this_is_my_example_line_2
this_is_my_ _example_line_3
this_is_my___example_line_4

What is the responsibility of (.*) in the Java String?

What is the responsibility of (.*) in the third line and how it works?
String Str = new String("Welcome to Tutorialspoint.com");
System.out.print("Return Value :" );
System.out.println(Str.matches("(.*)Tutorials(.*)"));

.matches() is a call to parse Str using the regex provided.
Regex, or Regular Expressions, are a way of parsing strings into groups. In the example provided, this matches any string which contains the word "Tutorials". (.*) simply means "a group of zero or more of any character".
This page is a good regex reference (for very basic syntax and examples).

Your expression matches any word prefixed and suffixed by any character of word Tutorial. .* means occurrence of any character any number of times including zero times.
The . represents regular expression meta-character which means any character.
The * is a regular expression quantifier, which means 0 or more occurrences of the expression character it was associated with.

matches takes regular expression string as parameter and (.*) means capture any character zero or more times greedily

.* means a group of zero or more of any character

In Regex:
.
Wildcard: Matches any single character except \n
for example pattern a.e matches ave in nave and ate in water
*
Matches the previous element zero or more times
for example pattern \d*\.\d matches .0, 19.9, 219.9

There is no reason to put parentheses around the .*, nor is there a reason to instantiate a String if you've already got a literal String. But worse is the fact that the matches() method is out of place here.
What it does is greedily matching any character from the start to the end of a String. Then it backtracks until it finds "Tutorials", after which it will again match any characters (except newlines).
It's better and more clear to use the find method. The find method simply finds the first "Tutorials" within the String, and you can remove the "(.*)" parts from the pattern.
As a one liner for convenience:
System.out.printf("Return value : %b%n", Pattern.compile("Tutorials").matcher("Welcome to Tutorialspoint.com").find());

Check string contains whitespace along with some other char sequence using regex in java

am using regex expression to check if a string contains white space.
my regex is : ^\\s+$
for example if my string is my name then regex matches should return true.
but it is returning true only if my string contains only spaces no other character.
How to check if a string contains a whitespace or tab or carriage return characters in between/start/end of some string.

^(.*\s+.*)+$ seems to work for me. Accepts anything as long as there is at least one space in the string. This will match the entire string.
If you only want to check for the presence of a space, you can just use \s without any begin or end markers in the string. The difference is that this will only match the individual spaces.

Your regex is not correct.
That's a string representing a regular expression. (as tchrist pointed out correctly)
The corresponding pattern that you get when using Pattern.compile() matches only strings containing one or more whitespace characters, starting from the beginning until the end. Thus, the matching string only consists of whitespace characters.
Try this string instead for Pattern.compile():
"\\s+"
The difference is that without the anchors "^" and "$" there may be other characters around the whitespace character. The whitespace character(s) may be everywhere in the string.
Using this pattern-string the whitespace character(s) must be at the beginning:
"^\\s+"
And here the sequence of whitespace characters has to be at the end:
"\\s+$"

Use org.apache.commons.lang.StringUtils.containsAny(). See http://commons.apache.org/lang/api-3.1/org/apache/commons/lang3/StringUtils.html.