I want to resize my buttons to be the same size and place then in a Panel on a JApplet. I have tried using
public void init() {
// TODO start asynchronous download of heavy resources
JButton btnWestern=new JButton("Western");
JButton btnPop=new JButton("Pop");
GridBagConstraints c4=new GridBagConstraints();
JPanel jPanel1 = new JPanel();
getContentPane().setLayout(new java.awt.GridBagLayout());
jPanel1.setLayout(new java.awt.GridBagLayout());
c4.gridx = 0;
c4.gridy = 0;
c4.insets = new Insets(36, 10, 0, 249);
jPanel1.add(btnWestern, c4);
c4.gridx = 0;
c4.gridy = 1;
c4.insets = new Insets(33, 10, 0, 249);
jPanel1.add(btnPop, c4);
add(jPanel1, new java.awt.GridBagConstraints());
}
When I run, this is what I get
But I noticed that if I change the button text to be the same or have the same length, like
JButton btnWestern=new JButton("Button1");
JButton btnPop=new JButton("Button2");
I get the desired output
What can I do to make sure that even the text of the buttons are not the same length, the buttons are the same size?
I'd suggest reading through the How to Use GridBagLayout tutorial if you haven't already. GridBagLayout is powerful but it is also one of the more complex LayoutManagers available.
I believe you need to set the GridBagConstraints.fill property to get the behavior you desire.
In your case this should be something like
c4.fill = GridBagConstraints.HORIZONTAL;
Edit (A bit of explanation for the observed behavior) When you use the same text on both buttons, their calculated size ends up being the same, so they are rendered as you want. When you use different size text, the buttons will render in a size that fits the text by default. The default value for GridBagConstraints.fill is GridBagConstraints.NONE which indicates to the LayoutManger to not resize the component. Changing the fill to GridBagConstraints.HORIZONTAL tells the LayoutManger to resize the component horizontally to fill the display area.
Related
I have some JLabel components in a JPanel (taskPanel) with a BoxLayout (which is in a panel with a GridBagLayout) and the labels are refusing to be aligned to the right. They keep aligning to the left no matter how I manipulate them.
Here I setup the GridBagConstraints for the panel that has the labels
GridBagConstraints taskPanelC = new GridBagConstraints();
taskPanelC.gridx = 4;
taskPanelC.gridy = 0;
taskPanelC.gridwidth = 1;
taskPanelC.anchor = GridBagConstraints.NORTHEAST;
taskPanelC.weighty = 1;
taskPanelC.weightx = 1;
taskPanelC.insets = new Insets(10, 10, 10, 10);
timePanel.add(taskPanel, taskPanelC);
Here are the GridBagConstraints for the panel before the task panel
//Setup the gridBagLayout
GridBagConstraints timeTextC = new GridBagConstraints();
timeTextC.gridx = 1;
timeTextC.gridy = 0;
timeTextC.gridwidth = 3;
timeTextC.anchor = GridBagConstraints.CENTER;
timeTextC.weighty = 1;
timeTextC.weightx = 1;
Here I add a header to the taskPanel (I don't really care how this is aligned)
taskListLabel = new JLabel("Task List");
taskListLabel.setFont(new Font("Helvetica", Font.BOLD, 24));
taskPanel.add(taskListLabel);
Here is where I am adding the labels I want to be right-justified/aligned. I have tried setHorizontalTextPosition and setAlignmentX and both do not work, causing the text to stay left aligned. However, when I tried setAlignmentX, the header became unaligned with the task labels
JLabel task = new JLabel(name, SwingConstants.RIGHT);
//Allow deleting of the label
task.addMouseListener(new ClickListener());
//Add task to the task panel
taskPanel.add(task);
This is what it currently looks like
I want the text under task list to be right-aligned so the time is always on the right
Here is a link to the full code in case the summary was not enough: Github Repo
Check out the following methods from the JLabel API:
setHorizontalAlignment(...) - used to align the text when the width of the label is greater than the width of the text
setAlignmentX(...) - might be used by the layout manager to align component
I copied the entire code from the link
https://github.com/kennyftang/WorkflowTimer/blob/master/src/WorkflowTimer.java
I guess the code is incomplete, as addTask(String name) method is not called anywhere in the code.
I am really confused about which label you want to be on the right side? As I observed that the "task list" are already on the right side.
Please provide the image explaining which label you want on which side? Also, don't use so many layouts and get confused for this small UI just one layout is enough.
Step 1 Comment the following line.
// taskPanel.add(taskListLabel);
Step2 Add the following 4 lines in that place,
JPanel panel = new JPanel();
panel.setLayout(new BorderLayout());
panel.add(taskListLabel, BorderLayout.EAST);
taskPanel.add(panel,BorderLayout.LINE_END);
Step3 Comment the following line.
//taskPanel.add(task);
Step4 Add the following 4 lines in that place,
JPanel panel = new JPanel();
panel.setLayout(new BorderLayout());
panel.add(task,BorderLayout.EAST);
taskPanel.add(panel,BorderLayout.LINE_END);
Let me know if you have any issues. Thanks.
I know this is bit heavy solution, here instead of Jpanel we may use some even light weight component as well.
I have a dialog with several JTabbedPanes that can be minimized/maximized. However I have an issue when the tab is in minimized mode.
A small example of the code:
JDialog dialog = new JDialog();
JPanel main = new JPanel();
main.setLayout(new BoxLayout(main, BoxLayout.Y_AXIS));
JPanel tabPanel = new JPanel();
JTabbedPane tabPane = new JTabbedPane();
for (int i = 0; i < 5; i++) {
tabPane.addTab("Test" + i, new JPanel());
System.out.println(tabPane.getPreferredSize().height);
}
tabPanel.add(tabPane, BorderLayout.NORTH);
main.add(tabPanel, BorderLayout.CENTER);
dialog.add(main);
dialog.setPreferredSize(new Dimension(50, 100);
dialog.pack();
dialog.setVisible(true);
What I expected was a tab pane to be the smallest size possible, but I noticed that as I added more tabs, the height of the tabbed pane was increasing. This was the result from the print statement:
37, 55, 73, 91, 109
The fact that the height is increasing when tabs are added does not seem right to me since according to the documentation in https://docs.oracle.com/javase/tutorial/uiswing/components/tabbedpane.html, "The preferred size of the tabbed pane is just big enough to display its tallest child at its preferred height, and its widest child at its preferred width." I would expect that since I'm adding empty panels, the size would not change, but this does not seem to be the case. Is there anyway around this?
FYI, I am using the latest version of Java.
I need to design a swing GUI which has a JFrame with a Menu on top and another main panel having three more panels in center and a separate panel in the bottom of the panel. The required design of the UI is as below
But when I run my swing application I get the output like this (all the panels are packed in the center of the window)
Below is my code
import java.awt.*;
import javax.swing.*;
public class FrontEndView {
private JFrame mainFrame;
private JPanel mainPanel,subPanelUp,subPanelDown,panelLeft,panelRight,panelCenter,panelDown;
private JScrollPane scrollPane;
private JList logViewList;
private JPanel panel1;
public FrontEndView(){
this.prepareGUI();
}
public void prepareGUI(){
mainFrame=new JFrame("GUI");
Toolkit tk = Toolkit.getDefaultToolkit();
int xSize = ((int) tk.getScreenSize().getWidth());
int ySize = ((int) tk.getScreenSize().getHeight());
mainFrame.setSize(xSize,ySize);
mainFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
mainFrame.setResizable(true);
mainFrame.setLayout(new BorderLayout());
mainPanel=new JPanel();
mainPanel.setLayout(new GridBagLayout());
mainPanel.setComponentOrientation(ComponentOrientation.LEFT_TO_RIGHT);
GridBagConstraints gridbagConstMain = new GridBagConstraints();
GridBagConstraints gridbagConstSub = new GridBagConstraints();
subPanelUp=new JPanel();
subPanelUp.setLayout(new GridBagLayout());
subPanelUp.setComponentOrientation(ComponentOrientation.LEFT_TO_RIGHT);
panelLeft=new JPanel();
panelLeft.setBorder(BorderFactory.createTitledBorder("Message Defs"));
gridbagConstSub.fill = GridBagConstraints.HORIZONTAL;
gridbagConstSub.weightx = 0.5;
gridbagConstSub.gridx = 0;
gridbagConstSub.gridy = 0;
subPanelUp.add(panelLeft, gridbagConstSub);
panelCenter=new JPanel();
panelCenter.setBorder(BorderFactory.createTitledBorder("Main Workspace"));
gridbagConstSub.fill = GridBagConstraints.HORIZONTAL;
gridbagConstSub.weightx = 0.5;
gridbagConstSub.gridx = 1;
gridbagConstSub.gridy = 0;
subPanelUp.add(panelCenter, gridbagConstSub);
panelRight=new JPanel();
panelRight.setBorder(BorderFactory.createTitledBorder("Script Viewer"));
gridbagConstSub.fill = GridBagConstraints.HORIZONTAL;
gridbagConstSub.weightx = 0.5;
gridbagConstSub.gridx = 2;
gridbagConstSub.gridy = 0;
subPanelUp.add(panelRight, gridbagConstSub);
mainPanel.add(subPanelUp,gridbagConstMain);
subPanelDown=new JPanel();
subPanelDown.setLayout(new BorderLayout());
panelDown=new JPanel();
panelDown.setBorder(BorderFactory.createTitledBorder("Log View"));
logViewList= new JList();
panelDown.add(logViewList);
gridbagConstSub.fill = GridBagConstraints.HORIZONTAL;
//gridbagConst.ipady=20;
//gridbagConst.weightx = 0.0;
gridbagConstSub.gridwidth = 5;
gridbagConstSub.gridx = 0;
gridbagConstSub.gridy = 0;
subPanelDown.add(panelDown,BorderLayout.PAGE_END);
mainPanel.add(subPanelDown, gridbagConstSub);
scrollPane=new JScrollPane(mainPanel,ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED,ScrollPaneConstants.HORIZONTAL_SCROLLBAR_AS_NEEDED);
mainFrame.add(scrollPane);
mainFrame.setVisible(true);
}
public static void main(String[] args){
FrontEndView frontEnd = new FrontEndView();
}
}
I want to fill the GridBagLayout's cells with the relevant panel/control it holds as shown in the design and also each panel should have its controls filled inside (I need to add a JList inside the panelDown whose size should be the size of the panelDown JPanel).Simply I don't need any extra space visible in my JFrame. Please guide me on what is missing in my code.
I would suggest you can use nested panels with different layout managers to solve the problem.
The default layout of a frame is a BorderLayout.
So you could create a panel and add it to the PAGE_END so it displays the entire width at the bottom.
Then you can create another panel that uses a GridLayout. You can then add 3 child panels to this panel and each panel can use its own layout. Then you add this panel to the CENTER of the frame. As the frame size changes the extra spaces will be allocated to the CENTER so the panels will dynamically grow.
Edit:
Too many panels for me to take the time to understand what is happening
I was suggesting a structure like this:
frame (which by default uses a BorderLayout)
--- CENTER
panel using GrigBagLayout
childPanel1
childPanel2
childPanel3
---- PAGE_END
JScrollPane containing the JList
When you create the JList the basic code would be:
JList list = new JList(...);
list.setVisibleRowCount(5);
JScrollPane scrollPane = new JScrollPane( list );
There is no need to create a panel just to add the list to another panel. The point of setting the visible row count is to give the JList a fixed height. Scrollbars will then appear in the scroll pane as needed.
Now that the PAGE_END has a fixed height component all the reset of the space will go to the component that you add to the CENTER of the frame.
all the panels are packed in the center of the window)
The panels are displayed at their preferred sizes when you use the GridBagLayout. If the total size of all the panels is less than the size of the scrollpane then they will be in the center. If you want the panels to fill the space available, then I believe you need to use the weightx/y constraints. Read the section from the Swing tutorial on How to Use GridBagLayout which describes all the constraints.
That is why I suggested a GridLayout instead. It will make all the panels the same size and will fill the viewport of the scroll pane without playing with constraints.
mainFrame.add(menubar,BorderLayout.NORTH);
That is not how you add a menubar to the frame.
You should be using:
mainFrame.setJMenuBar(menuBar);
You were told this in your last question. Why did you not listen to the advice??? Why should we take the time to help when you don't pay attention to what is suggested.
Based on your instructions I changed my design in a way all of the outer panels are used with Border Layout and the inner most ones with more controls were used with Grid, GridBag and FlowLayouts based on the requirement. In that way the entire design could be done nicely.
Also if a particular panel within a cell of a layout needs to be expanded, I used the setPreferredSize(new Dimension(int,int)) whenever required.
I'm learning swing gui and I get this result when I use the following code:-
The code I use :-
private void initUI() {
JTextArea visualize=new JTextArea();
visualize.setEditable(false);
//DEFINE BUTTONS....
JButton[] buttons1={addition,subtraction,division,multiplication};
JButton [] buttons2={expr,date,conversion};
JPanel numerical=new JPanel(new FlowLayout());
numerical.setPreferredSize(new Dimension(350, 50));
for(int i=0;i<buttons1.length;i++){
numerical.add(buttons1[i]);
}
numerical.setBorder(new TitledBorder("Numerical Operations"));
JPanel nonnum=new JPanel(new FlowLayout());
nonnum.setPreferredSize(new Dimension(500, 50));
for(int i=0;i<buttons2.length;i++){
nonnum.add(buttons2[i]);
}
nonnum.setBorder(new TitledBorder("Non-numerical Operations"));
JPanel operations = new JPanel(new BorderLayout(2,2));
operations.setBorder(BorderFactory.createEmptyBorder(10, 10, 10, 10));
operations.setSize(800, 100);
operations.add(numerical,BorderLayout.WEST);
operations.add(nonnum,BorderLayout.EAST);
JTable sheet = new JTable(10,5);
add(visualize, BorderLayout.NORTH);
add(sheet,BorderLayout.SOUTH);
add(operations,BorderLayout.CENTER);
pack();
setSize(1000, 700);
setTitle("Spreadsheet Application");
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
setLocationRelativeTo(null);
}
But what I really want is this:-
My questions :-
Why is the operations panel too long?
How can I change it's height?
Doesn't "operations.setSize(..)" work?
Try using GroupLayout.
I'm also new to swing gui and had similar problems - GroupLayout saved the day
JPanel complete=new JPanel();
GroupLayout gl=new GroupLayout(complete);
complete.setLayout(gl);
gl.setAutoCreateContainerGaps(true);
gl.setHorizontalGroup(gl.createParallelGroup() //this is parallel bcz you need components vertically
.addComponent(visualize) //you MUST add components to both horizontal and vertical groups
.addComponent(operations)
.addComponent(sheet)
);
gl.setVerticalGroup(gl.createSequentialGroup() //NOTE that this is sequential
.addComponent(visualize)
.addComponent(operations)
.addGap(50) //you can add gaps if you want
.addComponent(sheet)
);
add(complete);
Because that's how BorderLayout works, take a closer look at How to Use BorderLayout. The CENTRE position will occupy all the remaining space of the frame, where as the NORTH and SOUTH positions will try and honour the preferred sizes of the components.
You could use a GridBagLayout, which will allow you more control over the layout or use a series of compound layouts.
Something like...
setLayout(new GridBagLayout());
GridBagConstraints gbc = new GridBagConstraints();
gbc.gridwidth = GridBagConstraints.REMAINDER;
gbc.weightx = 1;
gbc.fill = GridBagConstraints.BOTH;
add(visualize, gbc);
add(operations, gbc);
gbc.gridy = 1;
add(sheet, gbc);
It is generally discouraged to extend from a top level container like JFrame, instead you should use something like JPanel to define your UIs and then add them to the containers you want. This increases there re-usability and makes it easier to use on different containers
You may also like to take a look at How to Use Scroll Panes
SOME of us find GridBagLayout to be a royal pain, and you may not have to use it to do what you want to do.
The idea behind a layout manager is to let the layout manager control the size and position of its components so that you don't have to futz with them. MP is right, GridBag allows you a lot of control, but that also means you have to get a lot of things right to have it do what you want it to do.
So, an alternative: Make a JPanel to hold the visualize and operations panels; give this new panel a BoxLayout with a Y_AXIS orientation, then add them in the order you want them to appear, top-to-bottom.
Then put sheet in the BorderLayout.CENTER of the JFrame. In fact, I think you'll want to take MP's advice and go through a tutorial on JScrollPane; as best I remember, you create the panel, then create the JScrollPane instance with the panel as a construction parameter, then add the scrollpane instance to the JFrame (in the CENTER, in your case).
Being in the center, it will then expand and contract as the user changes window size.
Good luck. Swing takes some getting used to.
I am trying to make a 3 column layout, in each column i want to be able to absolute position labels and textboxes.
Problem is that my label (jLabel2) never even gets displayed..
Here is my code:
/**
* Top JPanel (Top)
*/
JPanel pnlTop = new JPanel();
pnlTop.setBackground(new java.awt.Color(223, 223, 217));
pnlTop.setBorder(BorderFactory.createMatteBorder(0, 0, 1, 0, new java.awt.Color(173, 173, 166)));
c.gridx = 0;
c.gridy = 0;
c.gridwidth = 5; // five rows
c.gridheight = 1; // one column
c.fill = GridBagConstraints.BOTH;
//c.weighty = 0.04;
add(pnlTop, c);
/**
* Top JPanel Content (Here is where i want to put absolute content)
*/
JPanel pnlTopContent = new JPanel();
pnlTopContent.setLayout(null);
jLabel2.setFont(new java.awt.Font("Lucida Grande", 1, 16)); // NOI18N
jLabel2.setText("Hello");
jLabel2.setLocation(150, 50);
pnlTopContent.add(jLabel2);
pnlTop.add(pnlTopContent);
Any ideas what i am doing wrong?
Then its showing but not in the right place
What does "right place" mean to you? Why are you even adding you label to a second panel? Why not just add the label directly to the pnlTopContent?
GridBagLayout has a constraint that allows you to position the component right/left/center of the column. Read the section from the Swing tutorial on How to Use GridBagLayout. You might want to start with the anchor constraint.
Use layout manager for pnlTopContent. Which one is right depends on what you want. Even the default FlowLayout might work. If you want to center the label, you can for example use FlowLayout with center alignment:
pnlTopContent.setLayout(new FlowLayout(FlowLayout.CENTER));