I am writing a servlet to run terminal commands, I have to run three commands one after the another on the same terminal.
When I use exec as shown below I am able to get the result for the single command,
Runtime rt = Runtime.getRuntime();
process proc = rt.exec("zsh");
but when I attempt to run,
Runtime rt = Runtime.getRuntime();
Process proc = rt.exec("zsh", "source ./myenv/bin/activate", "python runner.py");
it shows a warning (doesn't execute) as follows,
The method exec(String, String[], File) in the type Runtime is not applicable for the arguments (String, String, String).
I've also tried running three differed exec commands but they do not happen in the same sequence and on the same terminal, what should I do to make the above three commands to run on the same terminal sequentially and give me the output after the third command?
The three commands I intent to run are,
1. zsh
2. source ./myenv/bin/activate
3. python runner.py
all the three must be executed one after the other in the same sequence.
exec takes a String[] not a varargs list so you need to run:
Process proc = rt.exec(new String[] {"zsh", "source ./myenv/bin/activate",
"python runner.py"}, null, new File("parentdirectoryofmyenv"));
As shown you also need to include the working directory for the process or it won't be able to find "./myenv".
EDIT:
Simplifying this further. I am assuming that "source ./myenv/bin/activate" is setting the environment for the process. This can be done as follows:
Process proc = rt.exec(
new String[] {"python", "runner.py"},
new String[] {"ENV1=VAL1", "ENV2=VAL2"},
new File("parentdirectoryofrunnerpy"));
Related
I can run the following command from the terminal in Windows:
D:\myProject> node ./node_modules/someModule/create.js -c control -b 1
But not if I try to run this within Runtime.getRuntime().exec(cmdarray, envp, dir).
String[] cmdarray = {"node", "./node_modules/someModule/create.js"};
String[] envp = {"-c=control", "-b=1"};
File startingPath = new File("D:\myProject");
Process process = Runtime.getRuntime().exec(cmdarray, envp, startingPath);
I also tried to the cmdarray as a single entry and even adding the arguments at the end and leaving envp empty.
But it's not working.
How would be the correct way to write the command? And is there a difference, when I run this on Windows and Mac?
You shouldn't put command line options into the environment. They are not environment variables! Put them into the command array ... as individual array elements; e.g.
String[] cmdarray = {
"node", "./node_modules/someModule/create.js",
"-c", "control", "-b", "1"};
And is there a difference, when I run this on Windows and Mac?
If you do it this way, there should be no difference between Windows and Mac. But obviously it is up to you to test your code on all platforms you intend to support!
Note also that when you use a simple command name (e.g. node) the command needs to be on command search path; i.e. $PATH or %PATH%.
I was developing my spring boot server on Windows. Now I have upgraded to Ubuntu 20.04.
the project executes a python script which should return a result as a txt file with this command:
python3 -c "from main import *;main(function,'/tmp/execution12480676806364930620/executionResponse.txt')"
Thanks to this code:
List<String> items = Arrays.asList(project.getExecutorType().buildAndGetExecutionCommandByProject(project));
ProcessBuilder pb = new ProcessBuilder(items);
pb.directory(new File(project.getPath()));
Process p = pb.start();
p.waitFor(5, TimeUnit.SECONDS);
when I print in the console the array passed in the Item variable:
[python3, -c, "from main import *;main(function, '/tmp/execution12480676806364930620/executionResponse.txt')"]
and the path of the array passed in pb.directory :
/tmp/execution12480676806364930620
My problem is that the project is not running and returning nothing.
when i go to the folder and run the same command from terminal everything works.
And that on windows 10 this same process worked fine.
Looking at similar issues I modified my code like this but it doesn't change anything:
List<String> items = Arrays.asList(project.getExecutorType().buildAndGetExecutionCommandByProject(project));
ProcessBuilder pb = new ProcessBuilder();
pb.command(items);
pb.redirectErrorStream(true);
pb.directory(new File(project.getPath()));
Process p = pb.start();
p.waitFor(5, TimeUnit.SECONDS);
What am I doing wrong?
Edit :
My command for read outputs :
private String inputStreamToString(InputStream inputStream){
return new BufferedReader(
new InputStreamReader(inputStream, StandardCharsets.UTF_8)).lines()
.collect(Collectors.joining("\n"));
}
And I call it like that :
System.out.println(this.inputStreamToString(p.getErrorStream()));
System.out.println(this.inputStreamToString(p.getInputStream()));
What works, when I just run "python main.py" I get the errors and print them out.
I can easily add the command at the end of the main file but I don't understand why the python -c "..." is not working? I am not receiving any errors ... I manage several languages and this could be a problem for me later
Aha! On closer inspection I think you're right it's not executing anything (and thus not producing any output either normal or error for you to see).
You don't show how the array of strings is created, but your printout suggests you have actually put quotemarks in the third string. That's wrong. When you give the shell command line python -c "import this; dothat" the shell uses the quotemarks to control parsing of this command line, but it does not pass them to the python process; the args passed to the python process (shown vertically for clarity, and omitting the argv[0]=program used in C but omitted in Java) are actually
-c
import this; dothat
If you pass an argument actually containing quotemarks like
-c
"import this; dothat"
then python doesn't execute the commands import and dothat; instead it evaluates the string literal "import this; dothat" and (since it isn't running interactively) discards the result.
Try not including, or removing, the " at the beginning and end. But leave the ' inside the string value because you do want python to receive those.
In Java, I start one new Process using Runtime.exec(), and this process in turn spawns several child processes.
I want to be able to kill all the processes, and have previously been trying process.destroy() and process.destroyForcibly() - but the docs say that destroyForcibly() just calls destroy() in the default implementation and destroy() may not kill all subprocesses (I've tried and it clearly doesn't kill the child processes).
I'm now trying a different approach, looking up the PID of the parent process using the method suggested here and then calling ps repeatedly to traverse the PIDs of child processes, then killing them all using kill. (It only needs to run on Linux).
I've managed the first bit - looking up the PID, and am trying the following command to call ps to get the child PIDs:
String command = "/bin/ps --ppid " + pid;
Process process = new ProcessBuilder(command).start();
process.waitFor();
Unfortunately the 2nd line above is throwing an IOException, with the following message: java.io.IOException: Cannot run program "/bin/ps --ppid 21886": error=2, No such file or directory
The command runs fine if I paste it straight into the terminal on Ubuntu 16.04.
Any ideas would be very much appreciated.
Thanks
Calling the command you wish to run this way is always destined to fail.
Since Process does not effectively run a shell session, the command is basically handed over to the underlying OS to run. This means that it'll fail, since the path to t he program to be executed (in this case ps), is not the full one hence the error you're getting.
Also, testing whether your command works using a terminal is not correct. Using a terminal contains the notion of performing an action with an active logged in user with a correct path etc etc. All the above are not the case though when running a command through Process as these are not taken into consideration.
Furthermore, you also need to account for cases where the actual java application could be running under a different user, with a different set of permissions, paths etc.
In order for your to fix this, you can simply do either of the following:
1) Invoke your ps command using the full path to it (still not sure if it would work)
2) Change the way your create the Process object into something like: p = new ProcessBuilder("bash", "-c", command).start();
The second, will effectively run a bash session, passing in the ps command as an argument thus obtaining the desired result.
http://commons.apache.org/proper/commons-exec/tutorial.html
```
String line = "AcroRd32.exe /p /h " + file.getAbsolutePath();
CommandLine cmdLine = CommandLine.parse(line);
DefaultExecutor executor = new DefaultExecutor();
int exitValue = executor.execute(cmdLine);
```
It's not the first time I have tried to execute a system command from Java; but this time it turns out to be very hard. I have a script that executes just fine from the terminal. It reads input from a file (input.txt), it processes it and exports the result in another file (ouput.txt). The whole thing lasts no more than 1sec. But, when I try to execute it from Java, it gets stuck and never finishes. This is my code:
Process p = new ProcessBuilder("./runCalculator.sh").start();
p.waitFor();
I have also tried with Runtime.getRuntime().exec("./runCalculator.sh") but all the same. I've read both the InputStream and the ErrorStream of the process. The error stream returns nothing but a message like "Starting Calculation..."
Any ideas?
You need to use the following code:
ProcessBuilder pb = new ProcessBuilder();
pb.command("bash", "-c", "./runCalculator.sh");
Process process = pb.start();
int retValue = process.waitFor();
You likely need to invoke the unix command interpreter/processor for this to work. Please see: When Runtime.exec() won't.
Try this:
Process p = new ProcessBuilder("sh ./runCalculator.sh").start();
Another, simplier solution is that you can open program by entering the name of the program (this assumes that program is installed) instead of creating script and calling it.
Note that the name of the program isn't always what you see in Gnome's menu, for example Gnome's calculator is "gnome-calculator". Regarding this facts, you can run calculator by the folowing line:
Process p = Runtime.getRuntime().exec("gnome-calculator");
In that case you don't have a need for any sh scripts (in your case runCalculator.sh).
I have written a java program named Automate.java, in which the another java program named newsmail will be executed.
The problem i face here is, Automate.java is in Desktop location(should be in desktop only always due to some requirements) and newsmail is in /home/Admin/GATE521/LN_RB this location.
What must be done before the below code, such that the command prompt automatically goes to the required folder and executes the program.
String command = "java newsmail";
Process child = Runtime.getRuntime().exec(command);
You can use this exec() :
Process child = Runtime.getRuntime().exec(command, null, new File("/home/Admin/GATE521/LN_RB"));
Resources :
javadoc - Runtime.exec()
Use the new ProcessBuilder class, instead of Runtime.exec().
ProcessBuilder pb = new ProcessBuilder("java", "newsmail");
pb.directory("/home/Admin/GATE521/LN_RB");
pb.start();
You can even look at pb.environment() to change environment variables if necessary.