I'm using Mockrunner to create a mock result set for a select statement. I have a loop that executes the select statement (which returns a single value). I want to have the result set return a different value each time, but I have been unable to find anything about how to specify the result set return value based on the times the statement has been called. Here's a pseudocode snippet of the code:
In the test Code:
String selectSQL = "someselectStmt";
StatementResultSetHandler stmtHandler = conn.GetStatementResultSetHandler();
MockResultSet result = stmtHandler.createResultSet();
result.addRow(new Integer[]{new Integer(1)});
stmtHandler.prepareResultSet(selectSQL, result);
In the Actual Target Class:
Integer[] Results = getResults(selectSQL);
while(Results.length != 0){
//do some stuff that change what gets returned in the select stmt
Results = getResults(selectSQL)
}
So essentially I'd like to return something like 1 on the first time through, 2 on the 2nd and nothing on the 3rd. I haven't found anything so far that I'd be able to leverage that could achieve this. The mocked select statement will always return whatever the last result set was to be associated with it (for instance if I created two MockResultSets and associated both with the same select stmt). Is this idea possible?
Looping Control Flow Working Within Java and SQL
If you're coding this one in Java, a way to make your code execution calls return different, sequenced results can be accomplished throughh a looping control flow statement such as a do-while-loop. This Wikipedia reference has a good discussion using the contrast of the do-while-loop between implementations in Java and also in different programming lanugages.
Some Additional Influences through Observation:
A clue from your work with the Mockrunner tool:
The mocked select statement will always return whatever the last result set was to be associated with it (for instance if I created two MockResultSets and associated both with the same select stmt)
This is the case because the SELECT statement must actually change as well or else repeating the query will also repeat the result output. A clue is that your SQL exists as a literal string value throughout the execution of the code. Strings can be altered through code and simple string manipulations.
String selectSQL = "someselectStmt";
StatementResultSetHandler stmtHandler = conn.GetStatementResultSetHandler();
MockResultSet result = stmtHandler.createResultSet();
result.addRow(new Integer[]{new Integer(1)});
stmtHandler.prepareResultSet(selectSQL, result);
in addition to the selectSQL variable, also add a line for a numeric variable to keep track of how many times the SQL statement is executed:
Int queryLoopCount = 0;
In the following target class:
Integer[] Results = getResults(selectSQL);
while(Results.length != 0){
//do some stuff that change what gets returned in the select stmt
Results = getResults(selectSQL)
}
Try rewriting this WHILE loop control following this example. In your pseudocode, you will keep pulling the same data from the call to getResults(selectSQL); because the query remains the same through every pass made through the code.
Setting up the Test Schema and Example SQL Statement
Here is a little workup using a single MySQL table that contains "testdata" output to be fed into some result set. The ID column could be a way of uniquely identifying each different record or "test case"
SQL Fiddle
MySQL 5.5.32 Schema Setup:
CREATE TABLE testCaseData
(
id int primary key,
testdata_col1 int,
testdata_col2 varchar(20),
details varchar(30)
);
INSERT INTO testCaseData
(id, testdata_col1, testdata_col2, details)
VALUES
(1, 2021, 'alkaline gab', 'First Test'),
(2, 322, 'rebuked girdle', '2nd Test'),
(3, 123, 'municipal shunning', '3rd Test'),
(4, 4040, 'regal limerick', 'Skip Test'),
(5, 5550, 'admonished hundredth', '5th Test'),
(6, 98, 'docile pushover', '6th Test'),
(7, 21, 'mousiest festivity', 'Last Test');
commit;
Query 1 A Look at All the Test Data:
SELECT id, testdata_col1, testdata_col2, details
FROM testCaseData
Results:
| ID | TESTDATA_COL1 | TESTDATA_COL2 | DETAILS |
|----|---------------|----------------------|------------|
| 1 | 2021 | alkaline gab | First Test |
| 2 | 322 | rebuked girdle | 2nd Test |
| 3 | 123 | municipal shunning | 3rd Test |
| 4 | 4040 | regal limerick | Skip Test |
| 5 | 5550 | admonished hundredth | 5th Test |
| 6 | 98 | docile pushover | 6th Test |
| 7 | 21 | mousiest festivity | Last Test |
Query 2 Querying Only the First Record in the Table:
SELECT id, testdata_col1, testdata_col2, details
FROM testCaseData
WHERE id = 1
Results:
| ID | TESTDATA_COL1 | TESTDATA_COL2 | DETAILS |
|----|---------------|---------------|------------|
| 1 | 2021 | alkaline gab | First Test |
Query 3 Querying a Specific Test Record Within the Table:
SELECT id, testdata_col1, testdata_col2, details
FROM testCaseData
WHERE id = 2
Results:
| ID | TESTDATA_COL1 | TESTDATA_COL2 | DETAILS |
|----|---------------|----------------|----------|
| 2 | 322 | rebuked girdle | 2nd Test |
Query 4 Returning and Limiting the Output Set Size:
SELECT id, testdata_col1, testdata_col2, details
FROM testCaseData
WHERE id < 5
Results:
| ID | TESTDATA_COL1 | TESTDATA_COL2 | DETAILS |
|----|---------------|--------------------|------------|
| 1 | 2021 | alkaline gab | First Test |
| 2 | 322 | rebuked girdle | 2nd Test |
| 3 | 123 | municipal shunning | 3rd Test |
| 4 | 4040 | regal limerick | Skip Test |
Writing a Parameterized SQL Statement
I do not know if this difference in syntax yields the exact same results as your pseudocode, but I am recommending it from references of code structures that I know already work.
set condition value before loop
do{
// do some work
// update condition value
}while(condition);
The WHILE condition is instead at the end of the statement and should be based on a change to a value made within the looping block. We will now introduce the second variable, an int which tracks the number of times that the loop is iterated over:
String selectSQL = "someselectStmt";
String[] Results; = getResults(selectSQL);
// set condition value before loop
queryLoopCount = 0
do{
// do some work
Results = getResults(selectSQL);
// update condition value
queryLoopCount = queryLoopcount + 1;
}while(queryLoopCount < 6);
Where selectSQL comes from:
SELECT id, testdata_col1, testdata_col2, details
FROM testCaseData
WHERE id = 2;
And adapts with a built in parameter to:
selectSQL = 'SELECT id, testdata_col1, testdata_col2, details
FROM testCaseData
WHERE id = ' + queryLoopCount;
Mixing the string and integer values may not be a problem as in this reference on concatenated(+) values suggests: Anything concatenated to a string is converted to string (eg, "weight = " + kilograms).
Ideas for Specialized Case Requirements
You could introduce your own numbering sequence to get the records of each case to cycle through the reference table. There are a lot of possibilities by introducing an ORDER BY statement and altering the key ORDER BY value.
The "Skip" case. Within the Do-While loop, add a IF-THEN statement to conditionally skip a specific record.
set condition value before loop
do{
if ( queryLoopCount <> 4 ) {
// do some work}
// update condition value
queryLoopCount = queryLoopCount + 1;
}while(condition);
Using an if-then loop, this code sample will process all test records but will skip over the record of ID = 4 and continue through until the while loop condition is met.
Related
Need: To filter out data in list - 1 based on the values present in list - 2 with multiple criteria i.e. combination of Date & Order Number
Issue: Able to filter based on 1 criteria. But when I try adding another filter condition it treats it as 2 separate & not as combination. Unable to figure out how to make it as a combination.
Hope issue faced is clear.
Research: I referred to my earlier query on similar need - Link1 . Also checked - Link2
List 1: (All Orders)
[Date | OrderNumber | Time | Company | Rate ]
[2014-10-01 | 12345 | 10:00:01 | CompA | 1000]
[2015-03-01 | 23456 | 08:00:01 | CompA | 2200]
[2016-08-01 | 34567 | 09:00:01 | CompA | 3300]
[2017-09-01 | 12345 | 11:00:01 | CompA | 4400]
[2017-09-01 | 98765 | 12:00:01 | CompA | 7400]
List 2: (Completed Orders)
[Date | OrderNumber | Time]
[2014-10-01 | 12345 | 10:00:01]
[2015-03-01 | 23456 | 08:00:01]
[2016-08-01 | 34567 | 09:00:01]
[2017-09-01 | 98765 | 12:00:01]
Expected O/p after filter :
[Date | OrderNumber | Time | Company | Rate]
[2017-09-01 | 12345 | 11:00:01 | CompA | 4400]
Code:
// Data extracted from MySQL database
// List 1: All Orders
List<ModelAllOrders> listOrders = getDataFromDatabase.getTable1();
// List 2: Completed Orders
List<ModelCompletedOrders> listCompletedOrders = getDataFromDatabase.getTable2();
// Filter with 1 criteria works
Set<Integer> setOrderNumbers = listCompletedOrders.stream().map(ModelCompletedOrders::getOrderNumber).collect(Collectors.toSet());
listOrders = listOrders.stream().filter(p -> !setOrderNumbers.contains(p.getOrderNumber()).collect(Collectors.toList());
// Below not working as expected when trying to combinational filter
Set<LocalDate> setDates = listCompletedOrders.stream().map(ModelCompletedOrders::getDate).collect(Collectors.toSet());
listOrders = listOrders.stream().filter(p -> !setDates.contains(p.getDate()) && !setOrderNumbers.contains(p.getOrderNumber()))
.collect(Collectors.toList());
You've asked for logic that will do this:
The combination of Date & Order Number is unique. I need to check if that unique combination is present in List-2, if yes then filter out, if not then output should contain that row.
Stream::filter() will return a subset of the stream where the filter predicate returns true (i.e. it filters out those objects in the stream where the predicate is false).
listOrders = listOrders.stream().filter(p -> !setDates.contains(p.getDate()) && !setOrderNumbers.contains(p.getOrderNumber()))
.collect(Collectors.toList());
Your code expression here says "show me orders where the order's date does not appear in the list of prior orders AND where the order's order number does not appear in the list of prior orders". Your logical expression is wrong (you're getting confused between what in electronics would be called positive vs negative logic).
You want either:
listOrders = listOrders.stream().filter(p -> !(setDates.contains(p.getDate()) && setOrderNumbers.contains(p.getOrderNumber())))
.collect(Collectors.toList());
"show me orders where both the order's date and order's id are not
present in the list of prior orders"
or:
listOrders = listOrders.stream().filter(p -> !setDates.contains(p.getDate()) || !setOrderNumbers.contains(p.getOrderNumber()))
.collect(Collectors.toList());
"show me orders where either the order's date has not been seen before
OR the order's id has not been seen before"
I'm new at Java so this is probably an easy issue to a long time Java programmer.
Anyways, my issue is with using the JTable. I am wanting to load/save the data in that JTable. Problem being is that I am not sure how to go about saving a cell that the user has changed in some way.
The click event looks like this that I have:
#SuppressWarnings("serial")
class EditableTableModel extends AbstractTableModel {
String[] columnTitles;
Object[][] dataEntries;
int rowCount;
public void setValueAt(Object value, int row, int column) {
//Any change to the table
dataEntries[row][column] = value;
}
}
This function fires off just fine whenever I change any of the cells in the jTable. It also gives me the Row and the Column number from that edited cell along with, of course, the value that it was changed to. But my question is that:
How would I go about saving this data into my database if its just a cell value at a time?
My database structure looks like this (which has the same layout/order as the jTable structure):
ID | Data_script | data_status | data_users | data_error | data_rundate | lastUserWhoMod
-------------------------------------------------------------------------------------------
1 | Inquiries | Passed | Bob | No errors | 01/20/2019 | Bob
2 | Reporting | Passed | Jenny | No errors | 01/20/2019 | Bob
3 | Background | Failed | Bob | Lines 4,8 | 01/20/2019 | Jenny
4 | Maintenance | Passed | George | No errors | 01/20/2019 | Bob
So as an example, if I change the 1st row 3rd column which is data_users from Jenny to George then how would I map that to the database in order to save it in the correct spot (row, column)?
Need to consider also the table_key (pk assume id).
public void setValueAt(Object value, int row, int column) {
Object obj_key = dataEntries[row][0]; //assume id
//Any change to the table
dataEntries[row][column] = value;
//obj_key mapped inside method from Object to int
//get appropriate field_name from column index
run_sql(obj_key, row, column)
}
Raw update query
update table_name
set [computed_field_name] = column_new_value (dataEntries[row][column])
where id = obj_key
Since you know ahead corresponding names for cols, need also to set up properly
field_name ( if col=1 then data_script ...etc )
add a variable
int lastChanged = 0;
In setValueAt, add
lastChanged = row;
and call a function in a separate thread to update the database for the whole record, pointed out by lastChanged. That function must reset the value of lastChanged to -1.
The call to the DB must be performed in a separate thread, since setValueAt will be executing in the thread Java uses to paint the GUI's.
I am finding a solution to pass each scenario outline example row as object in cucuber-jvm.
So as for example if I consider a scenario
Scenario Outline: example
Given I have a url
When I choose <input_1>
Then page should hold field1 value as <validation field1> field2 value as <validation field2> fieldn value as <validation fieldn>
Examples:
| input_1 | validation field1 |validation field2|validation field n|
| input_1_case_1 | expected value 1 |expected value 1 |expected value n |
So in Step file
public void validationMethod(String validation field2,String validation field2,String validation field3){
............
............
}
So if I have more field then my method also consume more argument.
Now I want to pass all validation field as object in method. So is it possible using cucumber jvm? If possible could any one can please provide some suggestion with sample code.
You could try something like this
Then Use the following values
| <validation field1> | <validation field2> | <validation field3> |
Examples:
| input_1 | validation field1 |validation field2|validation field3 |
| input_1_case_1 | expected value 1 |expected value 2 |expected value 3 |
| input_2_case_2 | expected value 1 |expected value 2 |expected value 3 |
Step Definition
#Then("^Use the following values$")
public void useFollVal(List<String> valFields) {
//The values will be inside the list. Use index to access
}
You can even get an validation object instead of string list ie List<ValidationData>. To do this add a header in the step (not the examples table) with names matching the variables in the ValidationData class and cucumber will populate the data into the object.
Then Use the following values
| valField1 | valField2 | valField3 | <<<--- Header to add
| <validation field1> | <validation field2> | <validation field3> |
valField1 -> private String valField1; in ValidationData
Step Definition
#Then("^Use the following values$")
public void useFollVal(List<ValidationData> valObject) {
}
This is more of a comment: Wouldnt a variable length argument list work for you? You would need to know the sequence of your params though, without the argument names to help out.
public void multiParams(String... val){
}
I have two fields in a database table - date and student number. I want to increment the student number every time I insert something into this table.
I would like to take period-based cut-offs for the student number field. The first record to be inserted in a period should get inserted with student number = 1, the second with student number = 2, the third with student number = 3 and so on.
For example, each day could be treated as one period. Then, if today is 05/02/2016 (May 2, 2016) the first student record to get inserted would get student number = 1. When the date changes to 05/03/2016 (May 3, 2016) I want the student number to be reset to 1.
So the database table should look like this:
---------------------------
| date | student number |
---------------------------
| 05/02/16 | 1 |
| 05/02/16 | 2 |
| 05/02/16 | 3 |
| 05/03/16 | 1 |
---------------------------
This is in my controller code for insertion:
student.setStudentNo(job.getStudentType()
.concat("_")
.concat(Constants.datetimeJobDF.format(new Date()))
.concat("_"));
I already have a database with every user's scores and other stats. But the scores aren't organized in any way that make it usable to make a leaderboard rank.
If the table looks something like this:
+----------+-------+-----+
| Username | Score | ... |
+----------+-------+-----+
| UserA | 900 | ... |
+----------+-------+-----+
| UserB | 200 | ... |
+----------+-------+-----+
| UserC | 850 | ... |
+----------+-------+-----+
| UserD | 450 | ... |
+----------+-------+-----+
There is no relation to position in the database and score. Now, what I want to do is create a query of the database collecting the scores for each user, then rearranging them by score. I figure this would be something like ORDER BY score DESC.
After ordering them in the correct way, I want to input the new values into a table with only username and rank, which I can query ingame to tell the rank of any given player requested.
ex:
+----------+------+
| Username | Rank |
+----------+------+
| UserA | 1 |
+----------+------+
| UserC | 2 |
+----------+------+
| UserD | 3 |
+----------+------+
| UserB | 4 |
+----------+------+
Now if I quered rank where username=UserA I would get 1
So what is my question? How do I, in java, query the database for score & username then rearrange the values into a new table based on the numerical rank, not score.
For specific user, this might work:
select username, score, (select count(h.username)+1 from users u, (select username, score from users) h where u.username = 'UserG' and (h.score > u.score)) as 'rating' from users where username = 'UserG';
Problem with setting a variable #rank like Alain suggested would be in case of duplicate scores, what if 2 users have a score of 100? Query above will rate them both as #5, if that is what you need.
The "In Java" is the only confusing part of your question. You want something like:
CREATE TABLE leaderboard (username varchar(50), score int unsigned, rank int unsigned)
INSERT INTO leaderboard (username, score, rank) SELECT username, score, #rank:=#rank+1 FROM scores_table, (SELECT #rank:=0) as run_once order by rank desc;
Untested, but that would be the concept. When it comes time to recalculate the leaderboard just:
DELETE * from leaderboard;
INSERT INTO leaderboard (username, score, rank) SELECT username, score, #rank:=#rank+1 FROM scores_table, (SELECT #rank:=0) as run_once order by score desc;
Make the database, um, return the data you need in the format you want:
set #rank = 0;
select username, #rank := #rank + 1 as rank
from user_scores
order by score desc
No Java magic required.
There was a similar discussion in this thread.
In general it's better to just select ordering by score and then put the query result into an array list. 0th item would be the person with the best score, 1st item person with second score, etc.
If you really need to select with ranking in the result set try using one of the examples in the linked discussion.