Im trying to make a fullscreen application.
I would like to know how to make the component that I add on the JFrame to occupy a part of the screen on every resolution.
Design tab mode:
When I run on fullscreen i get this:
how can I make this following interface adjust to full screen?
Here's an idea of the some of the basic layout managers and which ones respect preferred sizes (meaning if preferred size is respected, as container expands, component will not expand with it, and vice versa)
That being said, you may want to use a BorderLayout, and place your top component at the BorderLayout.PAGE_START. Ad the screen increases, so will the component contained in that layout position. (Note: the example's main container uses a BorderLayout)
As far as the image, if you want to stretch, I'd take a look at StretchIcon from Darryl Burke. This will keep the image to a relative size.
Also a common practice is to nest panels with different layout managers, to get your desired result. You can see an example here by Andrew Thompson
Also see more about layout managers at Visual Guide to Layout Managers
Related
Okay, I am kind of desperate right now. I hope you guys can help.
I need to layout content panels with Java Swing. The Problem is, that every content is different. So I need a panel that resize itself for every content. Basically what LayoutManagers are invented for.
I need a left panel and a right panel. The widths of the panels should be fixed. The heights should adjust to the given content
|<---- 30% ------->|<----- 70% -------------------->|
Easy going I thought, but it just wont work. I tried different layout managers. Some of them keep the 30% rule, but doesn't wrap the content and just display them in one single line (BorderLayout).
If a LayoutManager does support line-break (even if its just for HTML text but that is fine for me) it wont support the fixed width. A combination of both didn't worked for me either.
Note that I need to stick to Swing and can not use another more advanced library because the system I am developing for is stuck to Java 1.5. Furthermore, I know the total screenwidth so I could calculate the width of the panels to work with fixed widths, but I need to be flexible with the height.
You can achieve this by using nested BorderLayouts. Start by setting your Panel's layout as BorderLayout.
After that, for each left and right panels, set layouts as BorderLayout again. At this level, you will set %30 and %70 ratio.
Within this layouts, add your contents to NORTH layouts. This will enable your panels' height to match given content.
Not sure if what I need is possible.
I have a container (JPanel) that contains some internal elements.
I was wondering if it is possible to force internal elements to fit into the container's size.
I need them to be fully visible i.e., resize to fit inside the Panel's size and not cut some parts of the internal elements.
Scrolling is not an option.
Is this possible by using a Layout or something?
EDIT: Important clarification:
The thing is that I do not have access to the internal elements neither to their properties so I would say that a Layoutmanager capable of resizing child elements to fit to its size is needed. I tested BorderLayout and GridBagLayout but the result is always the same, the internal elements are cut out.
It's for exactly that reason that LayoutManagers exist. All the LayoutManagers work for simple containers directly, excluding GridBagLayout which is to able to handle most complete GUIs directly.
For most complete GUI's you have some choices as follows:
Look for a 3rd party layout such as MigLayout or here
Use GridBagLayout
Very easy way is use nested layout, where there is more than one JPanel and each has child JPanels with the same or different LayoutManager
Or custom layout, should be hard..., but same as using GridBagLayout
You could set the JPanel layout to border layout, then add the single child to the center. If there are multiple children, this approach becomes less useful since components added to the the NORTH, SOUTH, EAST, and WEST will remain statically sized while the centre resizes to fill the remainder.
In short, this isn't an ideal solution. All layouting in Swing is made all the more complex by the fact that different components behave in different ways, so you really need to provide further details of the child components you wish to add to your panel, and any behaviour that has been overridden on those components.
The best way is to try a couple of simple examples to see what mileage you get and whether subtle redesign of your child component nesting could help.
you can use a layout, like GridBagLayout, or BorderLayout depending on the situation. With proper weights it is possible.
this sounds to me like you should just peek an appropriate layout manager and use it. For example, look at BorderLayout - put your component in the CENTER and it will occupy all the area. Its up to each concrete layout manager to decide what will be the size of the components.
Mark
I was using a JInternalFrame inside JDesktopPane. I wanted the internal_frame to auto resize as desktop pane is resized, so I had to implement the AncestorResized event for the internal frame where I placed the following code:
this.setPreferredSize(this.getParent().getPreferredSize());
this.pack();
I have a JFrame with layout BorderLayout, I add JPanels using BorderLayout.CENTER
I have a JPanel(added using CENTER), that uses GridLayout to place 4 buttons.
These buttons are MASSIVE, taking up the whole screen. Or, I do it my way as follows:
I have a JFrame with layout null, I set JPanel bounds and add them.
I have a JPanel:
It sets it's own bounds so it takes up center 1/2 of screen, and is only 1/8 of the screen
tall.
It adds buttons using grid layout, and results in a nice line of buttons.
Obviously the second option looks better, but as I wish to conform to the norm, and always use layouts... How to I mix customization and layouts?(Or just solve my problem at all)
When you add a componeent to BorderLayout.CENTER, it will expand to fill the remaining space of the container not used by the other portions of the BorderLayout. Also, you can only add one component at a time to BorderLayout.CENTER. Subsequent adds will replace the previous component.
As for solving your exact problem, I suggest you start by taking a look at A Visual Guide to Layout Managers. This will give you a primer on what layouts are available in the Swing API. Oracle also has more in-depth tutorials for each layout. By nesting layouts, you can give your UI any look that you wish while leveraging their power, especially auto-calculations when a window is resized or otherwise changed.
I'm using Netbean's form creator and I'm trying out some things. I'm not sure if it's the layout manager, but when I create my own JPanel and add it to the main content pane of the my window, the size of the panel always maximizes inside the FrameView no matter what re-dimensioning methodology I use such as setSize or setPreferred size. I'm very new to AWT and Swing.
With NetBeans WYSIWYG designer it's a peace of cake - just be sure to use Free Form Design and use mouse for resizing. Maybe the panel is itself larger than FrameView, so double click on it (you are editing it exclusively) and make it smaller. Than double click to get back to parent component and you should be fine.
Or maybe check some tutorials at NetBeans site.
You're not supposed to set sizes manually. Leave that to the layout managers, and your GUI will not break when the window size or the font or even just a button label changes.
The trick with layout managers is that you can use not just one but several, in nested JPanels. That way, nearly any layout is possible.
This happens because the layout manager of JPanel's container (perhaps it is either JFrame or another JPanel) instructs the JPanel to maximize.
Do the following:
Find out, who is the parent of this JPanel (take a look at NetBeans's containment object tree)
Check, what layout is defined for the container
Read the documentation about LayoutManager's (they're in java.awt package)
???
PROFIT!
In my experience, Swing is a very picky thing. I'd try setMaximumSize and setPreferedSize. As a side note though: when ever I used GridLayout, it always stretches whatever is in each of the cells (to make it symmetrical I guess). Flow, Box, Border, and I think GridBag don't have that problem though.
-Brett
How would I go about making the length of the tabs automatically resize based on how much room is left in that row of tabs.
Picture:
As you can see the tab's width is based off the text in the tab.
If you need me to explain what I want better then just ask me because I don't know if I made it clear enough.
You can use a custom component and set it's preferred size. For example, in ButtonTabComponent of TabComponentsDemo:
label.setPreferredSize(new Dimension(...));
You have to choose an appropriate dimension based on other aspects of your layout, so it won't be automatic.
I want to define a size for the actual tabbed pan.
The size of the JTabbedPane is a function of the dimensions and LayoutManager of the Container to which it has been added. In the example cited, the default layout of the frame's content pane is BorderLayout, and add(pane) adds it to the center by default.
To accomplish your goal, I see two approaches:
Divide the current width of the enclosing Container among the existing tabs and repaint the tabbed pane, as shown in this example.
Develop your own implementation of TabbedPaneUI and interpret SCROLL_TAB_LAYOUT accordingly.