public Object countOccurrences(String string)
{
int e = 0;
int i = 0;
while ( i < sentence.length())
{
if(sentence.contains(string))
{
e++;
i++;
return e;
}
else
{
break;
}
}
return e;
}
What is wrong with my code that won't allow me to pass the test? is there anyway I can use the substring method inside a loop to do this?
#Test
public void testCountOccurrences()
{
assertEquals(1, sc1.countOccurrences("ence"));
assertEquals(2, sc1.countOccurrences("en"));
assertEquals(1, sc2.countOccurrences("that"));
assertEquals(0, sc2.countOccurrences("This"));
}
What is wrong with my code that won't allow me to pass the test?
Before doing anything else, you should consider how you could have worked out what was wrong for your code to start with. Did you debug through it? At what point did it behave differently to how you expected it to? If you haven't learned how to use a debugger yet, now is a great time to start.
As for the next step, look at this code:
if(sentence.contains(string))
{
e++;
i++;
return e;
}
That condition doesn't depend on i or e, just on sentence and string. So as long as sentence is of length at least 1, you'll either return 1 or 0. Your code can never return more than 1.
That's what's wrong with your code at the moment - as for how to fix it, I'd start looking at String.indexOf(String, int). In other words, you want to find the first occurrence, then find the next occurrence, then the next occurrence, until you can't find any more. (Use the return value to work out where to start looking on the next iteration, as well as checking that there was a match.)
A couple of situations to be careful of:
How many times does "abbbc" contain "bb"?
How many times does "abbbc" contain ""?
I'd also urge a couple of other changes:
Your method has a return type of Object - why? Surely it's always going to return an integer, so a return type of int would be more appropriate
This is a great candidate for parameterized testing. Look into how you can effectively separate your single test into multiple test cases which can pass or fail independently, but without the source overhead of lots of test methods... (Hint: each test case should have the sentence, the text you're looking for, and the expected number of matches.)
public Object countOccurrences(String string) {
int e = 0;
int i = 0;
while (i <= (sentence.length() - string.length() + 1)) {
if (sentence.substr(i, string.length() - 1).equals(string)) {
e++;
}
i++;
}
return e;
}
I didn't got to try it myself but it should work.
I am building a Sudoku solver that use the Try and Fail technique to solve any problem. My algorithm is:
1)Update (method that remove any possible value that already given as a final value to element in the same Row, column or squar)
2)Get the minimum element that has minimum number of possible values
3)start solve assuming the first possible value is the final value
4)save the current sate into a stack
5)Try to solve
5-a)If solved, return
5-b)if not solved and with invalid Sudoku, then Pop previous state
6)Repeat step 3) for all possible vaues (9)
7)Repeat step 2) until the puzzel is solved
This is my code
Stack<Element[][]> myStack= new Stack<>();
private Element[][] mySudoku;
public void solve(){
update();//remove all final values from all possible values for each element
if(isSudokuSolved(mySudoku)){
return;
}
//find a cell that is not confirmed and has the minimal candidates
int celli=-1,cellj=-1, p=10;
for(int i=0;i<9;i++){
for(int j=0;j<9;j++){
if(mySudoku[i][j].getValue()==0){
if(mySudoku[i][j].getPossibleValues().size()<p){
celli=i;
cellj=j;
p=mySudoku[i][j].getPossibleValues().size();
}
}
}
}
try {
for (int c = 0; c < mySudoku[celli][cellj].getPossibleValues().size() - 1; c++) {
//save state
Element[][] copy=deepCopy(mySudoku);//copy the current state
myStack.push(copy);
//apply candidate to cell
mySudoku[celli][cellj].setValue(mySudoku[celli][cellj].getPossibleValues().get(c));
update();//check is solved
if(checkValidInputSudoku(mySudoku)){
solve();
}else{
try {
mySudoku = myStack.pop();
} catch (EmptyStackException est) {
//do nothing
}
}
}
} catch (Exception e) {
}
//if we have reached here then we are at the last possible value for the candidates so confirm candidate in cell
if(celli!=-1 && cellj!=-1 && p!=10) {//Some problems happen here "out of Boundry -1 Error"
mySudoku[celli][cellj].setValue(mySudoku[celli][cellj].getPossibleValues().get(mySudoku[celli][cellj].getPossibleValues().size()-1));
}
}//end of solve method
I have spent more than 6 hours trying to find out the problem. I have checked for the Update() method, deepCopy() method and checkValidInputSudoku() method. They all works fine. Thank you in Advance
I can see one problem in your code. You have a loop that is sawing off the branch it sits on:
for(int c = 0; c < mySudoku[celli][cellj].getPossibleValues().size() - 1; c++) {
...
mySudoku[celli][cellj].setValue(mySudoku[celli]cellj].getPossibleValues().get(c));
...
}
Apart from that, you are missing one of the values, it should be for(c=0; c!=size; ++c), i.e. not size - 1. Also, calling getPossibleValues() just once would make this code much more readable. Lastly, catching and ignoring a stack underflow is just stupid, because it hides errors in your algorithm, as far as I can tell. If you don't know how to handle an error, don't just silence it. Since java requires you to catch it, put it in the outermost place possible or at least abort or do something, but don't ignore it!
One more thing: You are recursing and passing the context data via mySodoku and myStack. This is completely missing the point of recursion (or at least the way it's typically used), because the function call stack is the only stack you need. Using these to pass parameters only makes things more complicated than necessary. Instead, the function should return a partial sodoku puzzle and return either the fully solved puzzle or null. Using is easier to distinguish than the exception you're using now, and it's a regular and expected thing, not really exceptional. Then, when trying different choices, you set the cell to the values in turn and recurse, until the call doesn't return null. If none of the choices returns a solution, you clear the cell and return null yourself.
solve(sodoku):
if sodoku is solved:
return true
if sodoku is invalid:
return false
c = some empty cell
for v in 1...9:
// set to a value and recurse
c = v
if solve(sodoku):
// found a solution
return true
// no solution found, clear cell and return failure
c = null
return false
BTW: This strategy is called "backtracking". Using a cell with the least amount of possible values is called "pruning", which allows you to cut off whole branches from the search tree. Actually determining the possible values also helps avoiding a few futile attempts.
i have recrusive function which works fine. The problem is it gives stackoverflow error when the number of lines are huge. I want to put it in iterative, probably using a for loop. Need some help in doing it.
private TreeSet validate(int curLine, TreeSet errorSet) {
int increment = 0;
int nextLine = 0;
if (curLine == lines.length || errorSet.size() != 0) {
return errorSet;
} else {
String line = lines[curLine];
//validation starts. After validation, line is incremented as per the requirements
increment = 1 //As per requirement. Depends on validation results of the line
if (increment > 0) {
try{
Thread.currentThread().sleep(100);
}catch(Exception ex){
System.out.println(ex);
}
nextLine = (curLine + increment);
validate(nextLine, errorSet);
}
}
return errorSet;
}
Poster's description of the method:
The method does validates textlines, these lines has instructions of how much line has to be skipped, if the line is valid. So, if the line is valid that many of lines will be skipped using the increment. if the line is not valid increment will be 0.
I'm not sure why this was ever recursive in the first place. This is perfectly suited for the use of a FOR loop. use something like so:
private TreeSet validate(int curLine, TreeSet errorSet) {
int increment = 0;
if (errorSet.size() != 0)
return errorSet;
for (int curLine = 0; curLine < lines.Length; curLine += increment)
{
// put your processing logic in here
// set the proper increment here.
}
}
If the increment is always going to be 1, then you can just use curr++ instead of curLine += increment
for(String line : lines) {
// validate line here
if(!errorSet.isEmpty()) {
break;
}
}
The solution for your problem could be simple for loop or while, with logical expression for stop condition. Typically we use for loop when we have to pass through all elements of Iterable or array. In case when we are not aware how many loops we are going to do we use a while loop. Advantage of for loop over while, is that we for free have localized variables so we ca not use them out side of the loop, therefore we reduce possibility to have some bug.
You problem is that you have to break the program on two conditions:
When errorSet is not empty.
When the array of lines have no longer items.
As contradiction, we can say that your program should continue:
Until errorSet is empty,
and until line number is smaller than array size where they are stored.
This provide us to simply expression
errorSet.isEmpty()
lineNumber < lines.length()
We can combine them using logical operator && and use as a stop rule in for loop.
for(int lineNumber= 0; errorSet.isEmpty() && lineNumber< lines.length(); lineNumber++) {
//code to operate
}
Note:
Typically for logical expression is used operator &&, that assure that every part of the logical expression is evaluated. An alternative for this is &, that in case of false do not operate longer and return false. We could be tempted to use this operator for this expression but i would be bad idea. Because when we would traversed all lines without error code will generate IndexOutOfBoundException, if we switch the places then we would not have any optimization as first expression would be evaluated same number of times.
I have a loop that looks something like this:
for (int i = 0; i < max; i++) {
String myString = ...;
float myNum = Float.parseFloat(myString);
myFloats[i] = myNum;
}
This is the main content of a method whose sole purpose is to return the array of floats. I want this method to return null if there is an error, so I put the loop inside a try...catch block, like this:
try {
for (int i = 0; i < max; i++) {
String myString = ...;
float myNum = Float.parseFloat(myString);
myFloats[i] = myNum;
}
} catch (NumberFormatException ex) {
return null;
}
But then I also thought of putting the try...catch block inside the loop, like this:
for (int i = 0; i < max; i++) {
String myString = ...;
try {
float myNum = Float.parseFloat(myString);
} catch (NumberFormatException ex) {
return null;
}
myFloats[i] = myNum;
}
Is there any reason, performance or otherwise, to prefer one over the other?
Edit: The consensus seems to be that it is cleaner to put the loop inside the try/catch, possibly inside its own method. However, there is still debate on which is faster. Can someone test this and come back with a unified answer?
PERFORMANCE:
There is absolutely no performance difference in where the try/catch structures are placed. Internally, they are implemented as a code-range table in a structure that is created when the method is called. While the method is executing, the try/catch structures are completely out of the picture unless a throw occurs, then the location of the error is compared against the table.
Here's a reference: http://www.javaworld.com/javaworld/jw-01-1997/jw-01-hood.html
The table is described about half-way down.
Performance: as Jeffrey said in his reply, in Java it doesn't make much difference.
Generally, for readability of the code, your choice of where to catch the exception depends upon whether you want the loop to keep processing or not.
In your example you returned upon catching an exception. In that case, I'd put the try/catch around the loop. If you simply want to catch a bad value but carry on processing, put it inside.
The third way: You could always write your own static ParseFloat method and have the exception handling dealt with in that method rather than your loop. Making the exception handling isolated to the loop itself!
class Parsing
{
public static Float MyParseFloat(string inputValue)
{
try
{
return Float.parseFloat(inputValue);
}
catch ( NumberFormatException e )
{
return null;
}
}
// .... your code
for(int i = 0; i < max; i++)
{
String myString = ...;
Float myNum = Parsing.MyParseFloat(myString);
if ( myNum == null ) return;
myFloats[i] = (float) myNum;
}
}
All right, after Jeffrey L Whitledge said that there was no performance difference (as of 1997), I went and tested it. I ran this small benchmark:
public class Main {
private static final int NUM_TESTS = 100;
private static int ITERATIONS = 1000000;
// time counters
private static long inTime = 0L;
private static long aroundTime = 0L;
public static void main(String[] args) {
for (int i = 0; i < NUM_TESTS; i++) {
test();
ITERATIONS += 1; // so the tests don't always return the same number
}
System.out.println("Inside loop: " + (inTime/1000000.0) + " ms.");
System.out.println("Around loop: " + (aroundTime/1000000.0) + " ms.");
}
public static void test() {
aroundTime += testAround();
inTime += testIn();
}
public static long testIn() {
long start = System.nanoTime();
Integer i = tryInLoop();
long ret = System.nanoTime() - start;
System.out.println(i); // don't optimize it away
return ret;
}
public static long testAround() {
long start = System.nanoTime();
Integer i = tryAroundLoop();
long ret = System.nanoTime() - start;
System.out.println(i); // don't optimize it away
return ret;
}
public static Integer tryInLoop() {
int count = 0;
for (int i = 0; i < ITERATIONS; i++) {
try {
count = Integer.parseInt(Integer.toString(count)) + 1;
} catch (NumberFormatException ex) {
return null;
}
}
return count;
}
public static Integer tryAroundLoop() {
int count = 0;
try {
for (int i = 0; i < ITERATIONS; i++) {
count = Integer.parseInt(Integer.toString(count)) + 1;
}
return count;
} catch (NumberFormatException ex) {
return null;
}
}
}
I checked the resulting bytecode using javap to make sure that nothing got inlined.
The results showed that, assuming insignificant JIT optimizations, Jeffrey is correct; there is absolutely no performance difference on Java 6, Sun client VM (I did not have access to other versions). The total time difference is on the order of a few milliseconds over the entire test.
Therefore, the only consideration is what looks cleanest. I find that the second way is ugly, so I will stick to either the first way or Ray Hayes's way.
While performance might be the same and what "looks" better is very subjective, there is still a pretty big difference in functionality. Take the following example:
Integer j = 0;
try {
while (true) {
++j;
if (j == 20) { throw new Exception(); }
if (j%4 == 0) { System.out.println(j); }
if (j == 40) { break; }
}
} catch (Exception e) {
System.out.println("in catch block");
}
The while loop is inside the try catch block, the variable 'j' is incremented until it hits 40, printed out when j mod 4 is zero and an exception is thrown when j hits 20.
Before any details, here the other example:
Integer i = 0;
while (true) {
try {
++i;
if (i == 20) { throw new Exception(); }
if (i%4 == 0) { System.out.println(i); }
if (i == 40) { break; }
} catch (Exception e) { System.out.println("in catch block"); }
}
Same logic as above, only difference is that the try/catch block is now inside the while loop.
Here comes the output (while in try/catch):
4
8
12
16
in catch block
And the other output (try/catch in while):
4
8
12
16
in catch block
24
28
32
36
40
There you have quite a significant difference:
while in try/catch breaks out of the loop
try/catch in while keeps the loop active
I agree with all the performance and readability posts. However, there are cases where it really does matter. A couple other people mentioned this, but it might be easier to see with examples.
Consider this slightly modified example:
public static void main(String[] args) {
String[] myNumberStrings = new String[] {"1.2345", "asdf", "2.3456"};
ArrayList asNumbers = parseAll(myNumberStrings);
}
public static ArrayList parseAll(String[] numberStrings){
ArrayList myFloats = new ArrayList();
for(int i = 0; i < numberStrings.length; i++){
myFloats.add(new Float(numberStrings[i]));
}
return myFloats;
}
If you want the parseAll() method to return null if there are any errors (like the original example), you'd put the try/catch on the outside like this:
public static ArrayList parseAll1(String[] numberStrings){
ArrayList myFloats = new ArrayList();
try{
for(int i = 0; i < numberStrings.length; i++){
myFloats.add(new Float(numberStrings[i]));
}
} catch (NumberFormatException nfe){
//fail on any error
return null;
}
return myFloats;
}
In reality, you should probably return an error here instead of null, and generally I don't like having multiple returns, but you get the idea.
On the other hand, if you want it to just ignore the problems, and parse whatever Strings it can, you'd put the try/catch on the inside of the loop like this:
public static ArrayList parseAll2(String[] numberStrings){
ArrayList myFloats = new ArrayList();
for(int i = 0; i < numberStrings.length; i++){
try{
myFloats.add(new Float(numberStrings[i]));
} catch (NumberFormatException nfe){
//don't add just this one
}
}
return myFloats;
}
As already mentioned, the performance is the same. However, user experience isn't necessarily identical. In the first case, you'll fail fast (i.e. after the first error), however if you put the try/catch block inside the loop, you can capture all the errors that would be created for a given call to the method. When parsing an array of values from strings where you expect some formatting errors, there are definitely cases where you'd like to be able to present all the errors to the user so that they don't need to try and fix them one by one.
If its an all-or-nothing fail, then the first format makes sense. If you want to be able to process/return all the non-failing elements, you need to use the second form. Those would be my basic criteria for choosing between the methods. Personally, if it is all-or-nothing, I wouldn't use the second form.
As long as you are aware of what you need to accomplish in the loop you could put the try catch outside the loop. But it is important to understand that the loop will then end as soon as the exception occurs and that may not always be what you want. This is actually a very common error in Java based software. People need to process a number of items, such as emptying a queue, and falsely rely on an outer try/catch statement handling all possible exceptions. They could also be handling only a specific exception inside the loop and not expect any other exception to occur.
Then if an exception occurs that is not handled inside the loop then the loop will be "preemted", it ends possibly prematurely and the outer catch statement handles the exception.
If the loop had as its role in life to empty a queue then that loop very likely could end before that queue was really emptied. Very common fault.
My perspective would be try/catch blocks are necessary to insure proper exception handling, but creating such blocks has performance implications. Since, Loops contain intensive repetitive computations, it is not recommended to put try/catch blocks inside loops. Additionally, it seems where this condition occurs, it is often "Exception" or "RuntimeException" which is caught. RuntimeException being caught in code should be avoided. Again, if if you work in a big company it's essential to log that exception properly, or stop runtime exception to happen. Whole point of this description is PLEASE AVOID USING TRY-CATCH BLOCKS IN LOOPS
In your examples there is no functional difference. I find your first example more readable.
You should prefer the outer version over the inner version. This is just a specific version of the rule, move anything outside the loop that you can move outside the loop. Depending on the IL compiler and JIT compiler your two versions may or may not end up with different performance characteristics.
On another note you should probably look at float.TryParse or Convert.ToFloat.
If you put the try/catch inside the loop, you'll keep looping after an exception. If you put it outside the loop you'll stop as soon as an exception is thrown.
I's like to add my own 0.02c about two competing considerations when looking at the general problem of where to position exception handling:
The "wider" the responsibility of the try-catch block (i.e. outside the loop in your case) means that when changing the code at some later point, you may mistakenly add a line which is handled by your existing catch block; possibly unintentionally. In your case, this is less likely because you are explicitly catching a NumberFormatException
The "narrower" the responsibility of the try-catch block, the more difficult refactoring becomes. Particularly when (as in your case) you are executing a "non-local" instruction from within the catch block (the return null statement).
If you want to catch Exception for each iteration, or check at what iteration Exception is thrown and catch every Exceptions in an iteration, place try...catch inside the loop. This will not break the loop if Exception occurs and you can catch every Exception in each iteration throughout the loop.
If you want to break the loop and examine the Exception whenever thrown, use try...catch out of the loop. This will break the loop and execute statements after catch (if any).
It all depends on your need. I prefer using try...catch inside the loop while deploying as, if Exception occurs, the results aren't ambiguous and loop will not break and execute completely.
setting up a special stack frame for the try/catch adds additional overhead, but the JVM may be able to detect the fact that you're returning and optimize this away.
depending on the number of iterations, performance difference will likely be negligible.
However i agree with the others that having it outside the loop make the loop body look cleaner.
If there's a chance that you'll ever want to continue on with the processing rather than exit if there an invalid number, then you would want the code to be inside the loop.
If it's inside, then you'll gain the overhead of the try/catch structure N times, as opposed to just the once on the outside.
Every time a Try/Catch structure is called it adds overhead to the execution of the method. Just the little bit of memory & processor ticks needed to deal with the structure. If you're running a loop 100 times, and for hypothetical sake, let's say the cost is 1 tick per try/catch call, then having the Try/Catch inside the loop costs you 100 ticks, as opposed to only 1 tick if it's outside of the loop.
The whole point of exceptions is to encourage the first style: letting the error handling be consolidated and handled once, not immediately at every possible error site.
put it inside. You can keep processing (if you want) or you can throw a helpful exception that tells the client the value of myString and the index of the array containing the bad value. I think NumberFormatException will already tell you the bad value but the principle is to place all the helpful data in the exceptions that you throw. Think about what would be interesting to you in the debugger at this point in the program.
Consider:
try {
// parse
} catch (NumberFormatException nfe){
throw new RuntimeException("Could not parse as a Float: [" + myString +
"] found at index: " + i, nfe);
}
In the time of need you will really appreciate an exception like this with as much information in it as possible.
That depends on the failure handling. If you just want to skip the error elements, try inside:
for(int i = 0; i < max; i++) {
String myString = ...;
try {
float myNum = Float.parseFloat(myString);
myFloats[i] = myNum;
} catch (NumberFormatException ex) {
--i;
}
}
In any other case i would prefer the try outside. The code is more readable, it is more clean. Maybe it would be better to throw an IllegalArgumentException in the error case instead if returning null.
I'll put my $0.02 in. Sometimes you wind up needing to add a "finally" later on in your code (because who ever writes their code perfectly the first time?). In those cases, suddenly it makes more sense to have the try/catch outside the loop. For example:
try {
for(int i = 0; i < max; i++) {
String myString = ...;
float myNum = Float.parseFloat(myString);
dbConnection.update("MY_FLOATS","INDEX",i,"VALUE",myNum);
}
} catch (NumberFormatException ex) {
return null;
} finally {
dbConnection.release(); // Always release DB connection, even if transaction fails.
}
Because if you get an error, or not, you only want to release your database connection (or pick your favorite type of other resource...) once.
Another aspect not mentioned in the above is the fact that every try-catch has some impact on the stack, which can have implications for recursive methods.
If method "outer()" calls method "inner()" (which may call itself recursively), try to locate the try-catch in method "outer()" if possible. A simple "stack crash" example we use in a performance class fails at about 6,400 frames when the try-catch is in the inner method, and at about 11,600 when it is in the outer method.
In the real world, this can be an issue if you're using the Composite pattern and have large, complex nested structures.