Develop Reference

J field unknown in where clause Mysql

just as in the title I have this error every time I launch my request, do you have the solution? it seems to me that this is a problem of apostrophe
stm.executeUpdate("UPDATE client SET Nom='"+txtno.getText()+"',Prenom='"
+txtpr.getText()+"',DateArrivee='"+txtda.getText()
+"',DataFin='"+txtdad.getText()+"',chambre='"
+txtid.getSelectedItem().toString()+"',Nb_personne='"
+txtnomb.getText()+"',Categorie='"+txtca.getText()
+"' WHERE 'Prix'='" +txtpri.getText());

You don't need (') around Prix. Try without it.

If apostrophe is the issue you can try to add slashes for apostrophe in getText method of the variables.
Also 'Prix' stands out form other variables please check it as mentioned below
stm.executeUpdate("UPDATE client SET Nom='"+txtno.getText()+"',Prenom='"+txtpr.getText()+ "',DateArrivee='"+txtda.getText()+"',DataFin='"+txtdad.getText()+"',chambre='"+txtid.getSelectedItem().toString()+"',Nb_personne='"+txtnomb.getText()+ "',Categorie='"+txtca.getText()+"' WHERE Prix=" +txtpri.getText());

Regex: Read value between multiple brackets

I currently working on translating a website (Smarty) with Poedit. To get all the text from the .tpl files i'm using regex to get the data between the {t} and {/t}. so an example:
{t}Password incorrect, please try again{/t}
The regex will read Password incorrect, please try again and place it in a .po file. This is all working fine. It goes wrong when it gets a little more advanced.
Sometimes the text between the {t} tags uses a parameter. this looks like this:
{t 1=$email|escape 2=$mailbox}No $1 given, please check your $2{/t}
This is also working great.
The real problem start when i use brackets inside the parameter like this:
{t 1={site info='name'} 2=$mailbox}visit %1 or go to your %2{/t}
My regex will close when it sees the first closing brackets so the result will be 2=$mailbox}visit %1 or go to your %2.
My regex looks like this:
\{t.*?\}?[}]([^\{]+)\{\/t\}|\{t\}([^\{]+)\{\/t\}
The regex is used inside a java program.
Does anybody has a way to fix this problem?

The easiest solution I see on this is to normalize the .tpl files. Just use a regex which matches all tags something like this one:
{[^}]*[^{]*}
I had the same issue to solve and it worked pretty good with the normalizing.
The normalizing-method would look like this:
final String regex = "\\{[^\\}]*[^\\{]*\\}";
private String normalizeContent(String content) {
return content.replaceAll(regex, "");
}

Selenium via java - sendKeys doesn't send specific chars to input

I'm having a strange condition where i'm trying to type into input by using sendKeys , the reuslt is that specific chars doesn't seem to be implemented in the input at all.
What i'm trying to do:
webDriver.findElement(By.id("additionalInfo(token_autocompleteSelectInputId)")).sendKeys("(test)");
the result is that input field is now : test) and the missing char is '(' .
If i will try
webDriver.findElement(By.id("additionalInfo(token_autocompleteSelectInputId)")).sendKeys("((((((((((")
the result is that the input is empty.
Anyone ever faced this issue before? it is happening on a very specific input in the app, couldn't find anything related to it in the html code.
Thanks in advance.
Edit: I can manually type ( in the input field.

Maybe it's a special character for selenium, have you tried using escape characters? Something like backslash before it if it allows it.
Edit: I found some issue report on github from last year, not sure if they agreed to not fix it. Executing a script to type "(" seems to be an alternative.
Source: https://github.com/seleniumhq/selenium/issues/674

try declaring the key as a string first
String keyToSend = "(test)";
webDriver.findElement(By.id("additionalInfo(token_autocompleteSelectInputId)")).sendKeys(keyToSend);

In this case you should try using JavascriptExecutor as below :-
WebElement el = webDriver.findElement(By.id("additionalInfo(token_autocompleteSelectInputId)"));
((JavascriptExecutor)webDriver).executeScript("arguments[0].value = arguments[1]", el, "(test)");
Hope it helps..:)

get all values using get paremeters in java

I'm passing the some values url from flex to java example:
URL format:
../mahesh/initUser.do?method=fwdAccDetails&securityId=mUuB3/p/ky5JhZPY5T8Znf01YCcIarIalQiGEXPMMsOkWDX+KtT4fx2gMML+uup8
After I'm tiring to get "securityId" values in java like
request.getParameter("securityId")
But I'm getting following values only
mUuB3/p/ky5JhZPY5T8Znf01YCcIarIalQiGEXPMMsOkWDX KtT4fx2gMML uup8
symbol getting empty space in java side..
Here is my Flex code:
navigateToURL(new URLRequest('../mahesh/initUser.do?method=fwdAccDetails&securityId='+value+'),'_s‌​elf');
I didn't get full values.. any one can help me how I will get correct values in Java..

You should use the encodeURIComponent()-Function to properly encode your securityId.
value = encodeURIComponent(value);
navigateToURL(new URLRequest('../mahesh/initUser.do?method=fwdAccDetails&securityId='+value+'),'_s‌​elf');
That way your String will be correct on the Java side.
If you want to read more about proper escaping, have a look at When are you supposed to use escape instead of encodeURI / encodeURIComponent? (Same arguments apply for Flex and JavaScript).

i just resolve my issue for following code in a javURLDecoder.decode(param1AfterEncoding.replace("+", "%2B"), "UTF-8").replace("%2B", "+")
Now its working fine only.. i dint other special character will work fine.. i will check it later..

Velocity - How to avoid ParseErrorException when using jQuery?

I'm trying to add a jQuery post to some JavaScript on a web page. The entire page is built up of several Velocity templates. Everything has been fine until I've tried to add the jQuery post, now I get:
org.apache.velocity.exception.ParseErrorException: Encountered "," at line 282, column 24 of /WEB-INF/velocity/www/comments.vm
Was expecting one of:
"(" ...
<RPAREN> ...
<ESCAPE_DIRECTIVE> ...
~~~snip~~~
Line 282 is $.post(... and column 24 appears to be the first "," character. Initially I had the JSON on this line, but I moved it up (to the var myJSONObject ... line)as I thought the error related to invalid JSON (tabs at the start of the line gave a misleading column number).
var myJSONObject = {"body": "", "action": "postcomment", "submitted": "true", "ajax": "true"};
myJSONObject.body = $("body").val();
$.post("$!{articleurl}", myJSONObject, function(result){
btn.textContent='Comment sent successfully.';
});
Minor Update
I changed the following lines:
var url = "$articleurl";
$.post(url, myJSONObject, function(result){
~~~snip~~~
The parse exception still focuses on the first ",". I'm assuming the issue is that Velocity thinks it should be able to resolve $.post - when in fact, it's jQuery. I've used jQuery in other Velocity VM templates without any problem. Is there a way to get Velocity to ignore certain lines / statements when parsing?
Update 2
I found this link about escaping references in Velocity, but it does not resolve my issue. Adding a "\" before $.post gives me the exact same error, but the column is one extra, because of the character added at the start of the line.

You can wrap your javascript with #[[ ... ]]# which tells Velocity to not parse the enclosed block (new in Velocity 1.7)
#[[
<script>
...
</script>
]]#

Ok, there appears to be two solutions for this:
First, with jQuery we can just avoid using the global alias $ and instead use the jQuery object directly:
jQuery.post(url, myJSONObject, function(result){
~~~snip~~~
In my case, the above works great. But I suspect in other scenarios (non-jQuery) this may not be possible. In which case, we can 'hide' our character within a valid Velocity reference like this:
#set( $D = '$' )
${D}
Source: http://velocity.apache.org/engine/devel/user-guide.html#escapinginvalidvtlreferences
I'd still like to know why the backslash escape didn't work, but the above will at least get me moving again. :)

I think this is a bug in version 1.6.x, because it works fine in 1.7(If it did not, please tell me, I test it many times..), according to the reference, the $ takes effect only when it is followed by a-zA-Z. I want to try do debug what happened really, but the translation code is generated by Java CC tool, it is too hard to recognize the logic...

you must create a js file with your javascript code
and import your js file into your vm code

I couldn't get it to work with any of the other fixes like escaping "$" in velocity unfortunately. I got it working by loading an external js-file with the jQuery instead of writing jQuery directly in velocity. Worked out for me at least, hope it helps someone :)
/björn