Develop Reference

check if the word in the set equals word in outside file

I have a set of words and an outside file.
I want to check if a word in the set is already present in the outside file. If the word is already in the file, then do nothing, if the word is not in the outside file already, then add it to the outside file.
This is the code I have written:
public static void toFile(Set<String> vocab, String filename)
{
try
{
for(String vocabWord : vocab)
{
File file = new File(filename);
Scanner sc2 = new Scanner(file);
while(sc2.hasNextLine())
{
String docWord = sc2.nextLine();
if (!(vocabWord.equals(docWord)))
{
FileWriter myWriter = new FileWriter(filename, true);
PrintWriter printWriter = new PrintWriter(myWriter);
printWriter.println(vocabWord);
printWriter.close();
}
else
break;
}
}
}
catch(IOException e)
{
e.printStackTrace();
}
}
I am using three different text documents to test it, have the line "test file one", "test file two", and "test file three".
The output I was expecting was: "test file three" (it is connected with a stop list which one and two are part of, and has been working)
However, when I run it, either with only one of the files or all three consecutively, the file always comes out empty.
I tried changing up things in the method, but nothing has worked, I either get an infinite loop or nothing in the outside file.
I am not sure what I am missing... I would really appreciate any help.

I tried this and added some comments for explanation. I have tested on local machine and it works
public static void toFile(Set<String> vocab, String filename) {
try {
for(String vocabWord : vocab) {
//task for each String in our Set
File file = new File(filename);
Scanner sc2 = new Scanner(file);
boolean exists = false;//lets say it doesn't exist
while(sc2.hasNextLine()) {
//task for each line in the text
//search the whole file first for the word
String docWord = sc2.nextLine();
if (docWord.equals(vocabWord)){
exists = true;
break;
}
}
if (!exists) {
//add the vocabWord only if it doesnt exists
FileWriter myWriter = new FileWriter(filename, true);
PrintWriter printWriter = new PrintWriter(myWriter);
printWriter.println(vocabWord);
printWriter.close();
}
}
} catch(IOException e) {
e.printStackTrace();
}
}

To append the missing vocabulary in order of vocab, you can reduce the file operations
as such:
public static void toFile(Set<String> vocab, String filename) {
try {
Charset charset = Charset.defaultCharset();
Path path = Paths.get(filename);
Set<String> existing = Files.lines(path, charset)
.collect(Collectors.toSet());
if (!existing.isEmpty()) {
try (BufferedWriter bw = Files.newBufferedWriter(path, charset,
StandardOpenOption.APPEND);
PrintWriter printWriter = new PrintWriter(bw)) {
vocab.stream()
.filter(word -> !existing.contains(word))
.forEach(word -> printWriter.println(word));
}
}
} catch (IOException e) {
e.printStackTrace();
}
}

How to rename a txt file using Java after copying contents from another txt file

I have created a program where there is a file called groups.txt. This file contains a list of names. To delete a group, it has to exist within the file. I used the Scanner method to search through each line for the name. If it contains the line, it sets val as 1. Which triggers the val == 1 condition. What I wanted to do during this block, is try to delete groupName from the groups.txt file. To do this, I created a new txt file called TempFile which copies all the names from groups.txt EXCEPT groupName. This file is then renamed to groups.txt and the old groups.txt file is deleted.
Everything works as intended, except the renaming. The temp.txt file still exists and the groups.txt file is unchanged. I checked the boolean success, and it always returns as false. Any ideas how to solve this?
if (method.equals("delete group")){
int val = 0;
String groupName = myClient.readLine();
try {
Scanner file = new Scanner(new File("groups.txt"));
while (file.hasNextLine()){
String line = file.nextLine();
if (line.indexOf(groupName) != -1){
val = 1;
}
}
if (val == 1){
try {
File groupFile = new File("groups.txt");
File tempFile = new File("temp.txt");
BufferedReader reader = new BufferedReader(new FileReader(groupFile));
BufferedWriter writer = new BufferedWriter(new FileWriter(tempFile));
String currentLine;
System.out.println(groupName);
while ((currentLine = reader.readLine()) != null){
String trimLine = currentLine.trim();
if (trimLine.equals(groupName)){
continue;
} else {
writer.write(currentLine + System.getProperty("line.separator"));
}
}
writer.close();
reader.close();
groupFile.delete();
boolean success = tempFile.renameTo("groups.txt");
} catch (IOException f){
System.err.println("File Not Found: " + f.getMessage());
} }
} catch (FileNotFoundException f){
System.err.println("File Not Found Exception: " + f.getMessage());
}
}
CODE BEFORE THE ABOVE:
if (command.equals("group")){
String method = myClient.readLine();
if (method.equals("create group")){
String groupName = myClient.readLine();
int val = 0;
try {
Scanner file = new Scanner(new File("groups.txt"));
while (file.hasNextLine()){
String line = file.nextLine();
if (line.indexOf(groupName) != -1){
Report.error("group name already exists, please pick another");
val = 1;
}
}
} catch (FileNotFoundException f){
System.err.println("File Not Found: " + f.getMessage());
}
if (val == 0){
try {
PrintWriter out = new PrintWriter(new FileWriter("groups.txt", true));
out.println(groupName);
out.close();
} catch (IOException e){
Report.error("IOException: " + e.getMessage());
}
}
In the second part of the code, this is where I originally update the groups.txt file. So every time the user adds a group, it updates the groups.txt file by adding the new groupName to the end of the file. First, I make sure the groupName doesn't already exist using Scanner. myClient is a BufferedReader which reads from another class which stores what the user types in the command line.

Also do not forget to close Scanner. First you should make delete() work and make sure you know your current working directory, and write your filepath relative to it. Check with:
File file = new File("abc.txt");
System.out.println(file.getAbsolutePath());
One thing might be unrelated, also check your environment because
In the Unix'esque O/S's you cannot renameTo() across file systems. This behavior is different than the Unix "mv" command. When crossing file systems mv does a copy and delete which is what you'll have to do if this is the case. The same thing would happen on Windows if you tried to renameTo a different drive, i.e. C: -> D:

Edit Linux Network Configuration File("/etc/network/interfaces") through code

I want to add a functionality in the App where the user can change machine IP scheme (IP, SubnetMask, DefaultGateway) permanently, So I want to do Read/Write operation on the Linux Network Configuration File ("/etc/network/interfaces") using following code.
File file = new File("/etc/network/interfaces");
boolean exists = file.exists();
String line = "";
FileWriter fw = new FileWriter(file.getAbsoluteFile());
BufferedWriter bw = new BufferedWriter(fw);
try
{
FileReader fr = new FileReader(file.getAbsoluteFile());
//BufferedReader br = new BufferedReader(fr);
Scanner scan = new Scanner(new FileInputStream(file));
if(exists)
{
while(scan.hasNext()) //while((line = br.readLine()) != null)
{
// Any Write operation
}
scan.close(); // br.close
}
}
bw.close();
Problem is that the check on while() loop keeps returning false.
I did some research for any alternative for that which includes using BufferedReader or Scanner to read the file but didn't work. All the following checks just keep returning false.
while(scan.hasNext())
while(scan.hasNextLine())
while((line = br.readLine()) != null)
Although file does exist, it contains its content But every time I try to read it with the above code all file content gets removed and the file gets empty.
Am I missing something? Is there any better alternative? I've also tried reading another file in the same directory which has full permission of read/write/execute for all users but still same result

As I'm trying to open the file to write and read was what causing the issue and loop gets terminated in the beginning. So it turns out that You should not use FileWriter before FileReader for same file. Doing so at the same time causing File reader to read empty file and loop terminates as it gets EndOfFile right at the beginning. Afterwards it closes the file empty hence all its contents are being lost.
Better way was to
First open the file for 'Read' only.
Scan through file line by line & keep a buffer of each line parsed (List in my case).
Add the content you wish to update in the file when you get to your Marker line & update you buffer as well.
Now open the file to 'Write' you updated list on it
Note: This is suitable if the file size is reasonably small to accommodate the file processing time.
File file = new File("/etc/network/interfaces");
boolean exists = file.exists();
Scanner scanner = null;
PrintWriter wirtter = null;
String line = "";
List<String> fileLines = new ArrayList<String>();
if(exists)
{
try {
scanner = new Scanner(new FileInputStream(file));
while(scanner.hasNextLine())
{
line = scanner.nextLine();
fileLines.add(line);
if(line.trim().startsWith("iface eth0 inet static"))
{
while(scanner.hasNextLine())
{
line = scanner.nextLine();
fileLines.add(line);
if(line.trim().startsWith("address"))
{
String updateStr = "\taddress "+ipAddress+"\t";
fileLines.remove(fileLines.size()-1);
fileLines.add(updateStr);
System.out.println("IP add updated");
}
else if(line.trim().startsWith("netmask"))
{
String updateStr = "\tnetmask "+subnetMask+"\t";
fileLines.remove(fileLines.size()-1);
fileLines.add(updateStr);
System.out.println("subnet add updated");
}
else if(line.trim().startsWith("gateway"))
{
String updateStr = "\tgateway "+defaultGateway+"\t";
fileLines.remove(fileLines.size()-1);
fileLines.add(updateStr);
System.out.println("Gatway add updated");
}
}
}
}
} catch (FileNotFoundException e) {
e.printStackTrace();
}
finally{
if(scanner != null)
scanner.close();
}
Now do the Writing Separately. And Also you'd want to restart the networking service
try {
wirtter = new PrintWriter(file);
for (String lineW : fileLines)
wirtter.println(lineW);
} catch (FileNotFoundException e) {
e.printStackTrace();
}
finally{
if(wirtter != null)
wirtter.close();
}
}
synchronized (p) {
String cmd = "sudo /etc/init.d/networking restart ";
p.exec(cmd);
p.wait(10000);
System.out.println("finishing restart 'Networking:' service");
}

i want to change the text in a file, my code is searching the word but not replacing the word

I am trying to replace a string from a js file which have content like this
........
minimumSupportedVersion: '1.1.0',
........
now 'm trying to replace the 1.1.0 with 1.1.1. My code is searching the text but not replacing. Can anyone help me with this. Thanks in advance.
public class replacestring {
public static void main(String[] args)throws Exception
{
try{
FileReader fr = new FileReader("G:/backup/default0/default.js");
BufferedReader br = new BufferedReader(fr);
String line;
while((line=br.readLine()) != null) {
if(line.contains("1.1.0"))
{
System.out.println("searched");
line.replace("1.1.0","1.1.1");
System.out.println("String replaced");
}
}
}
catch(Exception e){
e.printStackTrace();
}
}
}

First, make sure you are assigning the result of the replace to something, otherwise it's lost, remember, String is immutable, it can't be changed...
line = line.replace("1.1.0","1.1.1");
Second, you will need to write the changes back to some file. I'd recommend that you create a temporary file, to which you can write each `line and when finished, delete the original file and rename the temporary file back into its place
Something like...
File original = new File("G:/backup/default0/default.js");
File tmp = new File("G:/backup/default0/tmpdefault.js");
boolean replace = false;
try (FileReader fr = new FileReader(original);
BufferedReader br = new BufferedReader(fr);
FileWriter fw = new FileWriter(tmp);
BufferedWriter bw = new BufferedWriter(fw)) {
String line = null;
while ((line = br.readLine()) != null) {
if (line.contains("1.1.0")) {
System.out.println("searched");
line = line.replace("1.1.0", "1.1.1");
bw.write(line);
bw.newLine();
System.out.println("String replaced");
}
}
replace = true;
} catch (Exception e) {
e.printStackTrace();
}
// Doing this here because I want the files to be closed!
if (replace) {
if (original.delete()) {
if (tmp.renameTo(original)) {
System.out.println("File was updated successfully");
} else {
System.err.println("Failed to rename " + tmp + " to " + original);
}
} else {
System.err.println("Failed to delete " + original);
}
}
for example.
You may also like to take a look at The try-with-resources Statement and make sure you are managing your resources properly

If you're working with Java 7 or above, use the new File I/O API (aka NIO) as
// Get the file path
Path jsFile = Paths.get("C:\\Users\\UserName\\Desktop\\file.js");
// Read all the contents
byte[] content = Files.readAllBytes(jsFile);
// Create a buffer
StringBuilder buffer = new StringBuilder(
new String(content, StandardCharsets.UTF_8)
);
// Search for version code
int pos = buffer.indexOf("1.1.0");
if (pos != -1) {
// Replace if found
buffer.replace(pos, pos + 5, "1.1.1");
// Overwrite with new contents
Files.write(jsFile,
buffer.toString().getBytes(StandardCharsets.UTF_8),
StandardOpenOption.TRUNCATE_EXISTING);
}
I'm assuming your script file size doesn't cross into MBs; use buffered I/O classes otherwise.

Error in reading file java.io

So i'm trying to read the following string from the text file addToLibrary.txt
file:/Users/JEAcomputer/Music/iTunes/iTunes%20Media/Music/Flight%20Of%20The%20Conchords/Flight%20Of%20The%20Conchords/06%20Mutha'uckas.mp3
But when I do i get the following error:
java.io.FileNotFoundException: file:/Users/JEAcomputer/Music/iTunes/iTunes%20Media/Music/Flight%20Of%20The%20Conchords/Flight%20Of%20The%20Conchords/06%20Mutha'uckas.mp3 (No such file or directory)
Whats odd is that I got that string from a fileChooser using this method:
public static void addToLibrary(File f) {
String fileName = "addToLibrary.txt";
try {
FileWriter filewriter = new FileWriter(fileName, true);
BufferedWriter bufferedWriter = new BufferedWriter(filewriter);
bufferedWriter.newLine();
bufferedWriter.write(f.toURI().toString());
System.out.println("Your file has been written");
bufferedWriter.close();
} catch (IOException ex) {
System.out.println(
"Error writing to file '"
+ fileName + "'");
} finally {
}
}
An even stranger error is that my file reader can read things in another folder but not anything in iTunes Media.
I attempt to read all the files in the different folders with the following method:
public void getMusicDirectory() {
int index = 0;
try {
File[] contents = musicDir.listFiles();
//System.out.println(contents[3].toString());
for (int i = 0; i < contents.length; i++) {
//System.out.println("----------------------------------------"+contents.length);
String name = contents[i].getName();
//System.out.println(name);
if (name.indexOf(".mp3") == -1) {
continue;
}
FileInputStream file = new FileInputStream(contents[i]);
file.read();
System.out.println(contents[i].toURI().toString());
songsDir.add(new Song((new MediaPlayer(new Media(contents[i].toURI().toString()))), contents[i]));
file.close();
}
} catch (Exception e) {
System.out.println("Error -- " + e.toString());
}
try(BufferedReader br = new BufferedReader(new FileReader("addToLibrary.txt"))) {
//System.out.println("In check login try");
for (String line; (line = br.readLine()) != null; ) {
FileInputStream file = new FileInputStream(new File(line));
file.read();
songsDir.add(new Song(new MediaPlayer(new Media(line)), new File(line)));
file.close();
}
// line is not visible here.
} catch (Exception e) {
System.out.println("Error reading add to library-- " + e.toString());
}
}
So how can i make this work? why does the first part of the method work but not the second?

You are not having a problem reading the string
file:/Users/JEAcomputer/Music/iTunes/iTunes%20Media/Music/Flight%20Of%20The%20Conchords/Flight%20Of%20The%20Conchords/06%20Mutha'uckas.mp3
from a file. That part works fine. Your problem is after that, when you try to open the file with the path:
file:/Users/JEAcomputer/Music/iTunes/iTunes%20Media/Music/Flight%20Of%20The%20Conchords/Flight%20Of%20The%20Conchords/06%20Mutha'uckas.mp3
because that's not actually a path; it's a URI (although it can be converted to a path).
You could convert this to a path, in order to open it, but you have no reason to - your code doesn't actually read from the file (apart from the first byte, which it does nothing with) so there's no point in opening it. Delete the following lines:
FileInputStream file = new FileInputStream(contents[i]); // THIS ONE
file.read(); // THIS ONE
System.out.println(contents[i].toURI().toString());
songsDir.add(new Song((new MediaPlayer(new Media(contents[i].toURI().toString()))), contents[i]));
file.close(); // THIS ONE
and
FileInputStream file = new FileInputStream(new File(line)); // THIS ONE
file.read(); // THIS ONE
songsDir.add(new Song(new MediaPlayer(new Media(line)), new File(line)));
file.close(); // THIS ONE

file:/Users/JEAcomputer/Music/iTunes/iTunes%20Media/Music/Flight%20Of%20The%20Conchords/Flight%20Of%20The%20Conchords/06%20Mutha'uckas.mp3 is not a valid File reference, especially under Windows.
Since you've idendtified the String as a URI, you should treat it as such...
URI uri = URI.create("file:/Users/JEAcomputer/Music/iTunes/iTunes%20Media/Music/Flight%20Of%20The%20Conchords/Flight%20Of%20The%20Conchords/06%20Mutha'uckas.mp3");
Okay, but, there's no real way to read URI, but you can read a URL, so we need to convert the URI to URL, luckily, this is quite simple...
URL url = uri.toURL();
From there you can use URL#openStream to open an InputStream (which you can wrap in a InputStreamReader) and read the contents of the file, for example...
String imageFile = "file:/...";
URI uri = URI.create(imageFile);
try {
URL url = uri.toURL();
try (InputStream is = url.openStream()) {
byte[] bytes = new byte[1024 * 4];
int bytesRead = -1;
int totalBytesRead = 0;
while ((bytesRead = is.read(bytes)) != -1) {
// Somthing, something, something, bytes
totalBytesRead += bytesRead;
}
System.out.println("Read a total of " + totalBytesRead);
} catch (IOException ex) {
ex.printStackTrace();
}
} catch (MalformedURLException ex) {
ex.printStackTrace();
}
You could, however, save your self a lot of issues and stop using things like f.toURI().toString()); (File#toURI#toString) and simply use File#getPath instead...This would allow you to simply create a new File reference from the String...
Also, your resource management needs some work, basically, if you open it, you should close it. See The try-with-resources Statement for some more ideas