Develop Reference

Load resources from a jar

How can I get the file object from the resource folder from a built jar? I can easily do it from the IDE by doing the following however this does not work with jar files. The code bellow just creates a copy of a file in my resource folder and saves it on the users machine.
final ClassLoader classloader = Thread.currentThread().getContextClassLoader();
final InputStream configIs = classloader.getResourceAsStream("config.yml");
if(configIs != null) {
final File configFile = new File(chosenPath + "/config.yml");
Files.copy(configIs, configFile.toPath(), StandardCopyOption.REPLACE_EXISTING);
configIs.close();
}
I have been trying to figure out how to do the same from within a jar without much success even after reading many other articles. Based on my research the following was suggested. The code bellow loops through all of the paths that reference the resource path. This produces a 500+ KB text file so I am not exactly sure which one is correct but even if I find the correct one what do I do with it? Since the last if statement checks name starts with resourcePath I assume this is the correct entry
Entry:config.yml path:resources/problems.json
But how do I go from that to an input stream? If there is a better way of doing this let me know but so far I have not found any other resources on this topic.
final String resourcePath = "resources/problems.json";
final File jarFile = new File(getClass().getProtectionDomain().getCodeSource().getLocation().getPath());
if(jarFile.exists() && jarFile.isFile()) { // Run with JAR file
System.out.println("Run as jar");
try {
final JarFile jar = new JarFile(jarFile);
final Enumeration<JarEntry> entries = jar.entries(); //gives ALL entries in jar
while(entries.hasMoreElements()) {
final String name = entries.nextElement().getName();
System.out.println("Entry:" + name + " path:" + resourcePath);
if (name.startsWith(resourcePath)) { //filter according to the path
System.out.println(name);
}
}
jar.close();
} catch (IOException exception) {
exception.printStackTrace();
}
}

Perhaps this will help a bit:
/**
* Text files loaded with this method should work either within the IDE or your
* distributive JAR file.<br><br>
*
* <b>Example Usage:</b><pre>
* {#code
* try {
* List<String> list = loadFileFromResources("/resources/textfiles/data_2.txt");
* for (String str : list) {
* System.out.println(str);
* }
* }
* catch (IOException ex) {
* System.err.println(ex);
* } }</pre><br>
*
* As shown in the example usage above the file path requires the Resource
* folder to be named "resources" which also contains a sub-folder named
* "textfiles". This resource folder is to be located directly within the
* Project "src" folder, for example:<pre>
*
* ProjectDirectoryName
* bin
* build
* lib
* dist
* src
* resources
* images
* myImage_1.png
* myImage_2.jpg
* myImage_3.gif
* textfiles
* data_1.txt
* data_2.txt
* data_3.txt
* test</pre><br>
*
* Upon creating the resources/images and resources/textfiles folders within
* the src folder, your IDE should have created two packages within the Project
* named resources.images and resources.textfiles. Images would of course be
* related to the resources.images package and Text Files would be related to
* the resources.textfiles package.<br>
*
* #param filePath (String) Based on the example folder structure above this
* would be (as an example):<pre>
*
* <b> "/resources/textfiles/data_2.txt" </b></pre>
*
* #return ({#code List<String>}) A List of String containing the file's content.
*/
public List<String> loadFileFromResources(String filePath) throws java.io.IOException {
List<String> lines = new ArrayList<>();
try (java.io.InputStream in = getClass().getResourceAsStream(filePath);
java.io.BufferedReader reader = new java.io.BufferedReader(new java.io.InputStreamReader(in))) {
String line;
while ((line = reader.readLine()) != null) {
lines.add(line);
}
reader.close();
}
return lines;
}

How to get the location of the program you're running and store it in a File object [duplicate]

Want to improve this post? Provide detailed answers to this question, including citations and an explanation of why your answer is correct. Answers without enough detail may be edited or deleted.
My code runs inside a JAR file, say foo.jar, and I need to know, in the code, in which folder the running foo.jar is.
So, if foo.jar is in C:\FOO\, I want to get that path no matter what my current working directory is.

return new File(MyClass.class.getProtectionDomain().getCodeSource().getLocation()
.toURI()).getPath();
Replace "MyClass" with the name of your class.
Obviously, this will do odd things if your class was loaded from a non-file location.

Best solution for me:
String path = Test.class.getProtectionDomain().getCodeSource().getLocation().getPath();
String decodedPath = URLDecoder.decode(path, "UTF-8");
This should solve the problem with spaces and special characters.

To obtain the File for a given Class, there are two steps:
Convert the Class to a URL
Convert the URL to a File
It is important to understand both steps, and not conflate them.
Once you have the File, you can call getParentFile to get the containing folder, if that is what you need.
Step 1: Class to URL
As discussed in other answers, there are two major ways to find a URL relevant to a Class.
URL url = Bar.class.getProtectionDomain().getCodeSource().getLocation();
URL url = Bar.class.getResource(Bar.class.getSimpleName() + ".class");
Both have pros and cons.
The getProtectionDomain approach yields the base location of the class (e.g., the containing JAR file). However, it is possible that the Java runtime's security policy will throw SecurityException when calling getProtectionDomain(), so if your application needs to run in a variety of environments, it is best to test in all of them.
The getResource approach yields the full URL resource path of the class, from which you will need to perform additional string manipulation. It may be a file: path, but it could also be jar:file: or even something nastier like bundleresource://346.fwk2106232034:4/foo/Bar.class when executing within an OSGi framework. Conversely, the getProtectionDomain approach correctly yields a file: URL even from within OSGi.
Note that both getResource("") and getResource(".") failed in my tests, when the class resided within a JAR file; both invocations returned null. So I recommend the #2 invocation shown above instead, as it seems safer.
Step 2: URL to File
Either way, once you have a URL, the next step is convert to a File. This is its own challenge; see Kohsuke Kawaguchi's blog post about it for full details, but in short, you can use new File(url.toURI()) as long as the URL is completely well-formed.
Lastly, I would highly discourage using URLDecoder. Some characters of the URL, : and / in particular, are not valid URL-encoded characters. From the URLDecoder Javadoc:
It is assumed that all characters in the encoded string are one of the following: "a" through "z", "A" through "Z", "0" through "9", and "-", "_", ".", and "*". The character "%" is allowed but is interpreted as the start of a special escaped sequence.
...
There are two possible ways in which this decoder could deal with illegal strings. It could either leave illegal characters alone or it could throw an IllegalArgumentException. Which approach the decoder takes is left to the implementation.
In practice, URLDecoder generally does not throw IllegalArgumentException as threatened above. And if your file path has spaces encoded as %20, this approach may appear to work. However, if your file path has other non-alphameric characters such as + you will have problems with URLDecoder mangling your file path.
Working code
To achieve these steps, you might have methods like the following:
/**
* Gets the base location of the given class.
* <p>
* If the class is directly on the file system (e.g.,
* "/path/to/my/package/MyClass.class") then it will return the base directory
* (e.g., "file:/path/to").
* </p>
* <p>
* If the class is within a JAR file (e.g.,
* "/path/to/my-jar.jar!/my/package/MyClass.class") then it will return the
* path to the JAR (e.g., "file:/path/to/my-jar.jar").
* </p>
*
* #param c The class whose location is desired.
* #see FileUtils#urlToFile(URL) to convert the result to a {#link File}.
*/
public static URL getLocation(final Class<?> c) {
if (c == null) return null; // could not load the class
// try the easy way first
try {
final URL codeSourceLocation =
c.getProtectionDomain().getCodeSource().getLocation();
if (codeSourceLocation != null) return codeSourceLocation;
}
catch (final SecurityException e) {
// NB: Cannot access protection domain.
}
catch (final NullPointerException e) {
// NB: Protection domain or code source is null.
}
// NB: The easy way failed, so we try the hard way. We ask for the class
// itself as a resource, then strip the class's path from the URL string,
// leaving the base path.
// get the class's raw resource path
final URL classResource = c.getResource(c.getSimpleName() + ".class");
if (classResource == null) return null; // cannot find class resource
final String url = classResource.toString();
final String suffix = c.getCanonicalName().replace('.', '/') + ".class";
if (!url.endsWith(suffix)) return null; // weird URL
// strip the class's path from the URL string
final String base = url.substring(0, url.length() - suffix.length());
String path = base;
// remove the "jar:" prefix and "!/" suffix, if present
if (path.startsWith("jar:")) path = path.substring(4, path.length() - 2);
try {
return new URL(path);
}
catch (final MalformedURLException e) {
e.printStackTrace();
return null;
}
}
/**
* Converts the given {#link URL} to its corresponding {#link File}.
* <p>
* This method is similar to calling {#code new File(url.toURI())} except that
* it also handles "jar:file:" URLs, returning the path to the JAR file.
* </p>
*
* #param url The URL to convert.
* #return A file path suitable for use with e.g. {#link FileInputStream}
* #throws IllegalArgumentException if the URL does not correspond to a file.
*/
public static File urlToFile(final URL url) {
return url == null ? null : urlToFile(url.toString());
}
/**
* Converts the given URL string to its corresponding {#link File}.
*
* #param url The URL to convert.
* #return A file path suitable for use with e.g. {#link FileInputStream}
* #throws IllegalArgumentException if the URL does not correspond to a file.
*/
public static File urlToFile(final String url) {
String path = url;
if (path.startsWith("jar:")) {
// remove "jar:" prefix and "!/" suffix
final int index = path.indexOf("!/");
path = path.substring(4, index);
}
try {
if (PlatformUtils.isWindows() && path.matches("file:[A-Za-z]:.*")) {
path = "file:/" + path.substring(5);
}
return new File(new URL(path).toURI());
}
catch (final MalformedURLException e) {
// NB: URL is not completely well-formed.
}
catch (final URISyntaxException e) {
// NB: URL is not completely well-formed.
}
if (path.startsWith("file:")) {
// pass through the URL as-is, minus "file:" prefix
path = path.substring(5);
return new File(path);
}
throw new IllegalArgumentException("Invalid URL: " + url);
}
You can find these methods in the SciJava Common library:
org.scijava.util.ClassUtils
org.scijava.util.FileUtils.

You can also use:
CodeSource codeSource = YourMainClass.class.getProtectionDomain().getCodeSource();
File jarFile = new File(codeSource.getLocation().toURI().getPath());
String jarDir = jarFile.getParentFile().getPath();

Use ClassLoader.getResource() to find the URL for your current class.
For example:
package foo;
public class Test
{
public static void main(String[] args)
{
ClassLoader loader = Test.class.getClassLoader();
System.out.println(loader.getResource("foo/Test.class"));
}
}
(This example taken from a similar question.)
To find the directory, you'd then need to take apart the URL manually. See the JarClassLoader tutorial for the format of a jar URL.

I'm surprised to see that none recently proposed to use Path. Here follows a citation: "The Path class includes various methods that can be used to obtain information about the path, access elements of the path, convert the path to other forms, or extract portions of a path"
Thus, a good alternative is to get the Path objest as:
Path path = Paths.get(Test.class.getProtectionDomain().getCodeSource().getLocation().toURI());

The only solution that works for me on Linux, Mac and Windows:
public static String getJarContainingFolder(Class aclass) throws Exception {
CodeSource codeSource = aclass.getProtectionDomain().getCodeSource();
File jarFile;
if (codeSource.getLocation() != null) {
jarFile = new File(codeSource.getLocation().toURI());
}
else {
String path = aclass.getResource(aclass.getSimpleName() + ".class").getPath();
String jarFilePath = path.substring(path.indexOf(":") + 1, path.indexOf("!"));
jarFilePath = URLDecoder.decode(jarFilePath, "UTF-8");
jarFile = new File(jarFilePath);
}
return jarFile.getParentFile().getAbsolutePath();
}

If you are really looking for a simple way to get the folder in which your JAR is located you should use this implementation.
Solutions like this are hard to find and many solutions are no longer supported, many others provide the path of the file instead of the actual directory. This is easier than other solutions you are going to find and works for java version 1.12.
new File(".").getCanonicalPath()
Gathering the Input from other answers this is a simple one too:
String localPath=new File(getClass().getProtectionDomain().getCodeSource().getLocation().toURI()).getParentFile().getPath()+"\\";
Both will return a String with this format:
"C:\Users\User\Desktop\Folder\"
In a simple and concise line.

I had the the same problem and I solved it that way:
File currentJavaJarFile = new File(Main.class.getProtectionDomain().getCodeSource().getLocation().getPath());
String currentJavaJarFilePath = currentJavaJarFile.getAbsolutePath();
String currentRootDirectoryPath = currentJavaJarFilePath.replace(currentJavaJarFile.getName(), "");
I hope I was of help to you.

Here's upgrade to other comments, that seem to me incomplete for the specifics of
using a relative "folder" outside .jar file (in the jar's same
location):
String path =
YourMainClassName.class.getProtectionDomain().
getCodeSource().getLocation().getPath();
path =
URLDecoder.decode(
path,
"UTF-8");
BufferedImage img =
ImageIO.read(
new File((
new File(path).getParentFile().getPath()) +
File.separator +
"folder" +
File.separator +
"yourfile.jpg"));

For getting the path of running jar file I have studied the above solutions and tried all methods which exist some difference each other. If these code are running in Eclipse IDE they all should be able to find the path of the file including the indicated class and open or create an indicated file with the found path.
But it is tricky, when run the runnable jar file directly or through the command line, it will be failed as the path of jar file gotten from the above methods will give an internal path in the jar file, that is it always gives a path as
rsrc:project-name (maybe I should say that it is the package name of the main class file - the indicated class)
I can not convert the rsrc:... path to an external path, that is when run the jar file outside the Eclipse IDE it can not get the path of jar file.
The only possible way for getting the path of running jar file outside Eclipse IDE is
System.getProperty("java.class.path")
this code line may return the living path (including the file name) of the running jar file (note that the return path is not the working directory), as the java document and some people said that it will return the paths of all class files in the same directory, but as my tests if in the same directory include many jar files, it only return the path of running jar (about the multiple paths issue indeed it happened in the Eclipse).

Other answers seem to point to the code source which is Jar file location which is not a directory.
Use
return new File(MyClass.class.getProtectionDomain().getCodeSource().getLocation().toURI().getPath()).getParentFile();

the selected answer above is not working if you run your jar by click on it from Gnome desktop environment (not from any script or terminal).
Instead, I have fond that the following solution is working everywhere:
try {
return URLDecoder.decode(ClassLoader.getSystemClassLoader().getResource(".").getPath(), "UTF-8");
} catch (UnsupportedEncodingException e) {
return "";
}

I had to mess around a lot before I finally found a working (and short) solution.
It is possible that the jarLocation comes with a prefix like file:\ or jar:file\, which can be removed by using String#substring().
URL jarLocationUrl = MyClass.class.getProtectionDomain().getCodeSource().getLocation();
String jarLocation = new File(jarLocationUrl.toString()).getParent();

For the jar file path:
String jarPath = new File(MyClass.class.getProtectionDomain().getCodeSource().getLocation()
.toURI()).getPath();
For getting the directory path of that jar file:
String dirPath = new File(MyClass.class.getProtectionDomain().getCodeSource().getLocation()
.toURI()).getParent();
The results of the two lines above are like this:
/home/user/MyPrograms/myapp/myjar.jar (value of jarPath)
/home/user/MyPrograms/myapp (value of dirPath)

public static String dir() throws URISyntaxException
{
URI path=Main.class.getProtectionDomain().getCodeSource().getLocation().toURI();
String name= Main.class.getPackage().getName()+".jar";
String path2 = path.getRawPath();
path2=path2.substring(1);
if (path2.contains(".jar"))
{
path2=path2.replace(name, "");
}
return path2;}
Works good on Windows

I tried to get the jar running path using
String folder = MyClassName.class.getProtectionDomain().getCodeSource().getLocation().getPath();
c:\app>java -jar application.jar
Running the jar application named "application.jar", on Windows in the folder "c:\app", the value of the String variable "folder" was "\c:\app\application.jar" and I had problems testing for path's correctness
File test = new File(folder);
if(file.isDirectory() && file.canRead()) { //always false }
So I tried to define "test" as:
String fold= new File(folder).getParentFile().getPath()
File test = new File(fold);
to get path in a right format like "c:\app" instead of "\c:\app\application.jar" and I noticed that it work.

The simplest solution is to pass the path as an argument when running the jar.
You can automate this with a shell script (.bat in Windows, .sh anywhere else):
java -jar my-jar.jar .
I used . to pass the current working directory.
UPDATE
You may want to stick the jar file in a sub-directory so users don't accidentally click it. Your code should also check to make sure that the command line arguments have been supplied, and provide a good error message if the arguments are missing.

Actually here is a better version - the old one failed if a folder name had a space in it.
private String getJarFolder() {
// get name and path
String name = getClass().getName().replace('.', '/');
name = getClass().getResource("/" + name + ".class").toString();
// remove junk
name = name.substring(0, name.indexOf(".jar"));
name = name.substring(name.lastIndexOf(':')-1, name.lastIndexOf('/')+1).replace('%', ' ');
// remove escape characters
String s = "";
for (int k=0; k<name.length(); k++) {
s += name.charAt(k);
if (name.charAt(k) == ' ') k += 2;
}
// replace '/' with system separator char
return s.replace('/', File.separatorChar);
}
As for failing with applets, you wouldn't usually have access to local files anyway. I don't know much about JWS but to handle local files might it not be possible to download the app.?

String path = getClass().getResource("").getPath();
The path always refers to the resource within the jar file.

Try this:
String path = new File("").getAbsolutePath();

This code worked for me to identify if the program is being executed inside a JAR file or IDE:
private static boolean isRunningOverJar() {
try {
String pathJar = Application.class.getResource(Application.class.getSimpleName() + ".class").getFile();
if (pathJar.toLowerCase().contains(".jar")) {
return true;
} else {
return false;
}
} catch (Exception e) {
return false;
}
}
If I need to get the Windows full path of JAR file I am using this method:
private static String getPathJar() {
try {
final URI jarUriPath =
Application.class.getResource(Application.class.getSimpleName() + ".class").toURI();
String jarStringPath = jarUriPath.toString().replace("jar:", "");
String jarCleanPath = Paths.get(new URI(jarStringPath)).toString();
if (jarCleanPath.toLowerCase().contains(".jar")) {
return jarCleanPath.substring(0, jarCleanPath.lastIndexOf(".jar") + 4);
} else {
return null;
}
} catch (Exception e) {
log.error("Error getting JAR path.", e);
return null;
}
}
My complete code working with a Spring Boot application using CommandLineRunner implementation, to ensure that the application always be executed within of a console view (Double clicks by mistake in JAR file name), I am using the next code:
#SpringBootApplication
public class Application implements CommandLineRunner {
public static void main(String[] args) throws IOException {
Console console = System.console();
if (console == null && !GraphicsEnvironment.isHeadless() && isRunningOverJar()) {
Runtime.getRuntime().exec(new String[]{"cmd", "/c", "start", "cmd", "/k",
"java -jar \"" + getPathJar() + "\""});
} else {
SpringApplication.run(Application.class, args);
}
}
#Override
public void run(String... args) {
/*
Additional code here...
*/
}
private static boolean isRunningOverJar() {
try {
String pathJar = Application.class.getResource(Application.class.getSimpleName() + ".class").getFile();
if (pathJar.toLowerCase().contains(".jar")) {
return true;
} else {
return false;
}
} catch (Exception e) {
return false;
}
}
private static String getPathJar() {
try {
final URI jarUriPath =
Application.class.getResource(Application.class.getSimpleName() + ".class").toURI();
String jarStringPath = jarUriPath.toString().replace("jar:", "");
String jarCleanPath = Paths.get(new URI(jarStringPath)).toString();
if (jarCleanPath.toLowerCase().contains(".jar")) {
return jarCleanPath.substring(0, jarCleanPath.lastIndexOf(".jar") + 4);
} else {
return null;
}
} catch (Exception e) {
return null;
}
}
}

Something that is frustrating is that when you are developing in Eclipse MyClass.class.getProtectionDomain().getCodeSource().getLocation() returns the /bin directory which is great, but when you compile it to a jar, the path includes the /myjarname.jar part which gives you illegal file names.
To have the code work both in the ide and once it is compiled to a jar, I use the following piece of code:
URL applicationRootPathURL = getClass().getProtectionDomain().getCodeSource().getLocation();
File applicationRootPath = new File(applicationRootPathURL.getPath());
File myFile;
if(applicationRootPath.isDirectory()){
myFile = new File(applicationRootPath, "filename");
}
else{
myFile = new File(applicationRootPath.getParentFile(), "filename");
}

Not really sure about the others but in my case it didn't work with a "Runnable jar" and i got it working by fixing codes together from phchen2 answer and another from this link :How to get the path of a running JAR file?
The code:
String path=new java.io.File(Server.class.getProtectionDomain()
.getCodeSource()
.getLocation()
.getPath())
.getAbsolutePath();
path=path.substring(0, path.lastIndexOf("."));
path=path+System.getProperty("java.class.path");

Have tried several of the solutions up there but none yielded correct results for the (probably special) case that the runnable jar has been exported with "Packaging external libraries" in Eclipse. For some reason all solutions based on the ProtectionDomain do result in null in that case.
From combining some solutions above I managed to achieve the following working code:
String surroundingJar = null;
// gets the path to the jar file if it exists; or the "bin" directory if calling from Eclipse
String jarDir = new File(ClassLoader.getSystemClassLoader().getResource(".").getPath()).getAbsolutePath();
// gets the "bin" directory if calling from eclipse or the name of the .jar file alone (without its path)
String jarFileFromSys = System.getProperty("java.class.path").split(";")[0];
// If both are equal that means it is running from an IDE like Eclipse
if (jarFileFromSys.equals(jarDir))
{
System.out.println("RUNNING FROM IDE!");
// The path to the jar is the "bin" directory in that case because there is no actual .jar file.
surroundingJar = jarDir;
}
else
{
// Combining the path and the name of the .jar file to achieve the final result
surroundingJar = jarDir + jarFileFromSys.substring(1);
}
System.out.println("JAR File: " + surroundingJar);

The above methods didn't work for me in my Spring environment, since Spring shades the actual classes into a package called BOOT-INF, thus not the actual location of the running file. I found another way to retrieve the running file through the Permissions object which have been granted to the running file:
public static Path getEnclosingDirectory() {
return Paths.get(FileUtils.class.getProtectionDomain().getPermissions()
.elements().nextElement().getName()).getParent();
}

Mention that it is checked only in Windows but i think it works perfect on other Operating Systems [Linux,MacOs,Solaris] :).
I had 2 .jar files in the same directory . I wanted from the one .jar file to start the other .jar file which is in the same directory.
The problem is that when you start it from the cmd the current directory is system32.
Warnings!
The below seems to work pretty well in all the test i have done even
with folder name ;][[;'57f2g34g87-8+9-09!2##!$%^^&() or ()%&$%^##
it works well.
I am using the ProcessBuilder with the below as following:
🍂..
//The class from which i called this was the class `Main`
String path = getBasePathForClass(Main.class);
String applicationPath= new File(path + "application.jar").getAbsolutePath();
System.out.println("Directory Path is : "+applicationPath);
//Your know try catch here
//Mention that sometimes it doesn't work for example with folder `;][[;'57f2g34g87-8+9-09!2##!$%^^&()`
ProcessBuilder builder = new ProcessBuilder("java", "-jar", applicationPath);
builder.redirectErrorStream(true);
Process process = builder.start();
//...code
🍂getBasePathForClass(Class<?> classs):
/**
* Returns the absolute path of the current directory in which the given
* class
* file is.
*
* #param classs
* #return The absolute path of the current directory in which the class
* file is.
* #author GOXR3PLUS[StackOverFlow user] + bachden [StackOverFlow user]
*/
public static final String getBasePathForClass(Class<?> classs) {
// Local variables
File file;
String basePath = "";
boolean failed = false;
// Let's give a first try
try {
file = new File(classs.getProtectionDomain().getCodeSource().getLocation().toURI().getPath());
if (file.isFile() || file.getPath().endsWith(".jar") || file.getPath().endsWith(".zip")) {
basePath = file.getParent();
} else {
basePath = file.getPath();
}
} catch (URISyntaxException ex) {
failed = true;
Logger.getLogger(classs.getName()).log(Level.WARNING,
"Cannot firgue out base path for class with way (1): ", ex);
}
// The above failed?
if (failed) {
try {
file = new File(classs.getClassLoader().getResource("").toURI().getPath());
basePath = file.getAbsolutePath();
// the below is for testing purposes...
// starts with File.separator?
// String l = local.replaceFirst("[" + File.separator +
// "/\\\\]", "")
} catch (URISyntaxException ex) {
Logger.getLogger(classs.getName()).log(Level.WARNING,
"Cannot firgue out base path for class with way (2): ", ex);
}
}
// fix to run inside eclipse
if (basePath.endsWith(File.separator + "lib") || basePath.endsWith(File.separator + "bin")
|| basePath.endsWith("bin" + File.separator) || basePath.endsWith("lib" + File.separator)) {
basePath = basePath.substring(0, basePath.length() - 4);
}
// fix to run inside netbeans
if (basePath.endsWith(File.separator + "build" + File.separator + "classes")) {
basePath = basePath.substring(0, basePath.length() - 14);
}
// end fix
if (!basePath.endsWith(File.separator)) {
basePath = basePath + File.separator;
}
return basePath;
}

This code worked for me:
private static String getJarPath() throws IOException, URISyntaxException {
File f = new File(LicensingApp.class.getProtectionDomain().().getLocation().toURI());
String jarPath = f.getCanonicalPath().toString();
String jarDir = jarPath.substring( 0, jarPath.lastIndexOf( File.separator ));
return jarDir;
}

The getProtectionDomain approach might not work sometimes e.g. when you have to find the jar for some of the core java classes (e.g in my case StringBuilder class within IBM JDK), however following works seamlessly:
public static void main(String[] args) {
System.out.println(findSource(MyClass.class));
// OR
System.out.println(findSource(String.class));
}
public static String findSource(Class<?> clazz) {
String resourceToSearch = '/' + clazz.getName().replace(".", "/") + ".class";
java.net.URL location = clazz.getResource(resourceToSearch);
String sourcePath = location.getPath();
// Optional, Remove junk
return sourcePath.replace("file:", "").replace("!" + resourceToSearch, "");
}

I have another way to get the String location of a class.
URL path = Thread.currentThread().getContextClassLoader().getResource("");
Path p = Paths.get(path.toURI());
String location = p.toString();
The output String will have the form of
C:\Users\Administrator\new Workspace\...
The spaces and other characters are handled, and in the form without file:/. So will be easier to use.

How to get the absolute path of the Jar file? [duplicate]

Want to improve this post? Provide detailed answers to this question, including citations and an explanation of why your answer is correct. Answers without enough detail may be edited or deleted.
My code runs inside a JAR file, say foo.jar, and I need to know, in the code, in which folder the running foo.jar is.
So, if foo.jar is in C:\FOO\, I want to get that path no matter what my current working directory is.

return new File(MyClass.class.getProtectionDomain().getCodeSource().getLocation()
.toURI()).getPath();
Replace "MyClass" with the name of your class.
Obviously, this will do odd things if your class was loaded from a non-file location.

Best solution for me:
String path = Test.class.getProtectionDomain().getCodeSource().getLocation().getPath();
String decodedPath = URLDecoder.decode(path, "UTF-8");
This should solve the problem with spaces and special characters.

To obtain the File for a given Class, there are two steps:
Convert the Class to a URL
Convert the URL to a File
It is important to understand both steps, and not conflate them.
Once you have the File, you can call getParentFile to get the containing folder, if that is what you need.
Step 1: Class to URL
As discussed in other answers, there are two major ways to find a URL relevant to a Class.
URL url = Bar.class.getProtectionDomain().getCodeSource().getLocation();
URL url = Bar.class.getResource(Bar.class.getSimpleName() + ".class");
Both have pros and cons.
The getProtectionDomain approach yields the base location of the class (e.g., the containing JAR file). However, it is possible that the Java runtime's security policy will throw SecurityException when calling getProtectionDomain(), so if your application needs to run in a variety of environments, it is best to test in all of them.
The getResource approach yields the full URL resource path of the class, from which you will need to perform additional string manipulation. It may be a file: path, but it could also be jar:file: or even something nastier like bundleresource://346.fwk2106232034:4/foo/Bar.class when executing within an OSGi framework. Conversely, the getProtectionDomain approach correctly yields a file: URL even from within OSGi.
Note that both getResource("") and getResource(".") failed in my tests, when the class resided within a JAR file; both invocations returned null. So I recommend the #2 invocation shown above instead, as it seems safer.
Step 2: URL to File
Either way, once you have a URL, the next step is convert to a File. This is its own challenge; see Kohsuke Kawaguchi's blog post about it for full details, but in short, you can use new File(url.toURI()) as long as the URL is completely well-formed.
Lastly, I would highly discourage using URLDecoder. Some characters of the URL, : and / in particular, are not valid URL-encoded characters. From the URLDecoder Javadoc:
It is assumed that all characters in the encoded string are one of the following: "a" through "z", "A" through "Z", "0" through "9", and "-", "_", ".", and "*". The character "%" is allowed but is interpreted as the start of a special escaped sequence.
...
There are two possible ways in which this decoder could deal with illegal strings. It could either leave illegal characters alone or it could throw an IllegalArgumentException. Which approach the decoder takes is left to the implementation.
In practice, URLDecoder generally does not throw IllegalArgumentException as threatened above. And if your file path has spaces encoded as %20, this approach may appear to work. However, if your file path has other non-alphameric characters such as + you will have problems with URLDecoder mangling your file path.
Working code
To achieve these steps, you might have methods like the following:
/**
* Gets the base location of the given class.
* <p>
* If the class is directly on the file system (e.g.,
* "/path/to/my/package/MyClass.class") then it will return the base directory
* (e.g., "file:/path/to").
* </p>
* <p>
* If the class is within a JAR file (e.g.,
* "/path/to/my-jar.jar!/my/package/MyClass.class") then it will return the
* path to the JAR (e.g., "file:/path/to/my-jar.jar").
* </p>
*
* #param c The class whose location is desired.
* #see FileUtils#urlToFile(URL) to convert the result to a {#link File}.
*/
public static URL getLocation(final Class<?> c) {
if (c == null) return null; // could not load the class
// try the easy way first
try {
final URL codeSourceLocation =
c.getProtectionDomain().getCodeSource().getLocation();
if (codeSourceLocation != null) return codeSourceLocation;
}
catch (final SecurityException e) {
// NB: Cannot access protection domain.
}
catch (final NullPointerException e) {
// NB: Protection domain or code source is null.
}
// NB: The easy way failed, so we try the hard way. We ask for the class
// itself as a resource, then strip the class's path from the URL string,
// leaving the base path.
// get the class's raw resource path
final URL classResource = c.getResource(c.getSimpleName() + ".class");
if (classResource == null) return null; // cannot find class resource
final String url = classResource.toString();
final String suffix = c.getCanonicalName().replace('.', '/') + ".class";
if (!url.endsWith(suffix)) return null; // weird URL
// strip the class's path from the URL string
final String base = url.substring(0, url.length() - suffix.length());
String path = base;
// remove the "jar:" prefix and "!/" suffix, if present
if (path.startsWith("jar:")) path = path.substring(4, path.length() - 2);
try {
return new URL(path);
}
catch (final MalformedURLException e) {
e.printStackTrace();
return null;
}
}
/**
* Converts the given {#link URL} to its corresponding {#link File}.
* <p>
* This method is similar to calling {#code new File(url.toURI())} except that
* it also handles "jar:file:" URLs, returning the path to the JAR file.
* </p>
*
* #param url The URL to convert.
* #return A file path suitable for use with e.g. {#link FileInputStream}
* #throws IllegalArgumentException if the URL does not correspond to a file.
*/
public static File urlToFile(final URL url) {
return url == null ? null : urlToFile(url.toString());
}
/**
* Converts the given URL string to its corresponding {#link File}.
*
* #param url The URL to convert.
* #return A file path suitable for use with e.g. {#link FileInputStream}
* #throws IllegalArgumentException if the URL does not correspond to a file.
*/
public static File urlToFile(final String url) {
String path = url;
if (path.startsWith("jar:")) {
// remove "jar:" prefix and "!/" suffix
final int index = path.indexOf("!/");
path = path.substring(4, index);
}
try {
if (PlatformUtils.isWindows() && path.matches("file:[A-Za-z]:.*")) {
path = "file:/" + path.substring(5);
}
return new File(new URL(path).toURI());
}
catch (final MalformedURLException e) {
// NB: URL is not completely well-formed.
}
catch (final URISyntaxException e) {
// NB: URL is not completely well-formed.
}
if (path.startsWith("file:")) {
// pass through the URL as-is, minus "file:" prefix
path = path.substring(5);
return new File(path);
}
throw new IllegalArgumentException("Invalid URL: " + url);
}
You can find these methods in the SciJava Common library:
org.scijava.util.ClassUtils
org.scijava.util.FileUtils.

You can also use:
CodeSource codeSource = YourMainClass.class.getProtectionDomain().getCodeSource();
File jarFile = new File(codeSource.getLocation().toURI().getPath());
String jarDir = jarFile.getParentFile().getPath();

Use ClassLoader.getResource() to find the URL for your current class.
For example:
package foo;
public class Test
{
public static void main(String[] args)
{
ClassLoader loader = Test.class.getClassLoader();
System.out.println(loader.getResource("foo/Test.class"));
}
}
(This example taken from a similar question.)
To find the directory, you'd then need to take apart the URL manually. See the JarClassLoader tutorial for the format of a jar URL.

I'm surprised to see that none recently proposed to use Path. Here follows a citation: "The Path class includes various methods that can be used to obtain information about the path, access elements of the path, convert the path to other forms, or extract portions of a path"
Thus, a good alternative is to get the Path objest as:
Path path = Paths.get(Test.class.getProtectionDomain().getCodeSource().getLocation().toURI());

The only solution that works for me on Linux, Mac and Windows:
public static String getJarContainingFolder(Class aclass) throws Exception {
CodeSource codeSource = aclass.getProtectionDomain().getCodeSource();
File jarFile;
if (codeSource.getLocation() != null) {
jarFile = new File(codeSource.getLocation().toURI());
}
else {
String path = aclass.getResource(aclass.getSimpleName() + ".class").getPath();
String jarFilePath = path.substring(path.indexOf(":") + 1, path.indexOf("!"));
jarFilePath = URLDecoder.decode(jarFilePath, "UTF-8");
jarFile = new File(jarFilePath);
}
return jarFile.getParentFile().getAbsolutePath();
}

If you are really looking for a simple way to get the folder in which your JAR is located you should use this implementation.
Solutions like this are hard to find and many solutions are no longer supported, many others provide the path of the file instead of the actual directory. This is easier than other solutions you are going to find and works for java version 1.12.
new File(".").getCanonicalPath()
Gathering the Input from other answers this is a simple one too:
String localPath=new File(getClass().getProtectionDomain().getCodeSource().getLocation().toURI()).getParentFile().getPath()+"\\";
Both will return a String with this format:
"C:\Users\User\Desktop\Folder\"
In a simple and concise line.

I had the the same problem and I solved it that way:
File currentJavaJarFile = new File(Main.class.getProtectionDomain().getCodeSource().getLocation().getPath());
String currentJavaJarFilePath = currentJavaJarFile.getAbsolutePath();
String currentRootDirectoryPath = currentJavaJarFilePath.replace(currentJavaJarFile.getName(), "");
I hope I was of help to you.

Here's upgrade to other comments, that seem to me incomplete for the specifics of
using a relative "folder" outside .jar file (in the jar's same
location):
String path =
YourMainClassName.class.getProtectionDomain().
getCodeSource().getLocation().getPath();
path =
URLDecoder.decode(
path,
"UTF-8");
BufferedImage img =
ImageIO.read(
new File((
new File(path).getParentFile().getPath()) +
File.separator +
"folder" +
File.separator +
"yourfile.jpg"));

For getting the path of running jar file I have studied the above solutions and tried all methods which exist some difference each other. If these code are running in Eclipse IDE they all should be able to find the path of the file including the indicated class and open or create an indicated file with the found path.
But it is tricky, when run the runnable jar file directly or through the command line, it will be failed as the path of jar file gotten from the above methods will give an internal path in the jar file, that is it always gives a path as
rsrc:project-name (maybe I should say that it is the package name of the main class file - the indicated class)
I can not convert the rsrc:... path to an external path, that is when run the jar file outside the Eclipse IDE it can not get the path of jar file.
The only possible way for getting the path of running jar file outside Eclipse IDE is
System.getProperty("java.class.path")
this code line may return the living path (including the file name) of the running jar file (note that the return path is not the working directory), as the java document and some people said that it will return the paths of all class files in the same directory, but as my tests if in the same directory include many jar files, it only return the path of running jar (about the multiple paths issue indeed it happened in the Eclipse).

Other answers seem to point to the code source which is Jar file location which is not a directory.
Use
return new File(MyClass.class.getProtectionDomain().getCodeSource().getLocation().toURI().getPath()).getParentFile();

the selected answer above is not working if you run your jar by click on it from Gnome desktop environment (not from any script or terminal).
Instead, I have fond that the following solution is working everywhere:
try {
return URLDecoder.decode(ClassLoader.getSystemClassLoader().getResource(".").getPath(), "UTF-8");
} catch (UnsupportedEncodingException e) {
return "";
}

I had to mess around a lot before I finally found a working (and short) solution.
It is possible that the jarLocation comes with a prefix like file:\ or jar:file\, which can be removed by using String#substring().
URL jarLocationUrl = MyClass.class.getProtectionDomain().getCodeSource().getLocation();
String jarLocation = new File(jarLocationUrl.toString()).getParent();

For the jar file path:
String jarPath = new File(MyClass.class.getProtectionDomain().getCodeSource().getLocation()
.toURI()).getPath();
For getting the directory path of that jar file:
String dirPath = new File(MyClass.class.getProtectionDomain().getCodeSource().getLocation()
.toURI()).getParent();
The results of the two lines above are like this:
/home/user/MyPrograms/myapp/myjar.jar (value of jarPath)
/home/user/MyPrograms/myapp (value of dirPath)

public static String dir() throws URISyntaxException
{
URI path=Main.class.getProtectionDomain().getCodeSource().getLocation().toURI();
String name= Main.class.getPackage().getName()+".jar";
String path2 = path.getRawPath();
path2=path2.substring(1);
if (path2.contains(".jar"))
{
path2=path2.replace(name, "");
}
return path2;}
Works good on Windows

I tried to get the jar running path using
String folder = MyClassName.class.getProtectionDomain().getCodeSource().getLocation().getPath();
c:\app>java -jar application.jar
Running the jar application named "application.jar", on Windows in the folder "c:\app", the value of the String variable "folder" was "\c:\app\application.jar" and I had problems testing for path's correctness
File test = new File(folder);
if(file.isDirectory() && file.canRead()) { //always false }
So I tried to define "test" as:
String fold= new File(folder).getParentFile().getPath()
File test = new File(fold);
to get path in a right format like "c:\app" instead of "\c:\app\application.jar" and I noticed that it work.

The simplest solution is to pass the path as an argument when running the jar.
You can automate this with a shell script (.bat in Windows, .sh anywhere else):
java -jar my-jar.jar .
I used . to pass the current working directory.
UPDATE
You may want to stick the jar file in a sub-directory so users don't accidentally click it. Your code should also check to make sure that the command line arguments have been supplied, and provide a good error message if the arguments are missing.

Actually here is a better version - the old one failed if a folder name had a space in it.
private String getJarFolder() {
// get name and path
String name = getClass().getName().replace('.', '/');
name = getClass().getResource("/" + name + ".class").toString();
// remove junk
name = name.substring(0, name.indexOf(".jar"));
name = name.substring(name.lastIndexOf(':')-1, name.lastIndexOf('/')+1).replace('%', ' ');
// remove escape characters
String s = "";
for (int k=0; k<name.length(); k++) {
s += name.charAt(k);
if (name.charAt(k) == ' ') k += 2;
}
// replace '/' with system separator char
return s.replace('/', File.separatorChar);
}
As for failing with applets, you wouldn't usually have access to local files anyway. I don't know much about JWS but to handle local files might it not be possible to download the app.?

String path = getClass().getResource("").getPath();
The path always refers to the resource within the jar file.

Try this:
String path = new File("").getAbsolutePath();

This code worked for me to identify if the program is being executed inside a JAR file or IDE:
private static boolean isRunningOverJar() {
try {
String pathJar = Application.class.getResource(Application.class.getSimpleName() + ".class").getFile();
if (pathJar.toLowerCase().contains(".jar")) {
return true;
} else {
return false;
}
} catch (Exception e) {
return false;
}
}
If I need to get the Windows full path of JAR file I am using this method:
private static String getPathJar() {
try {
final URI jarUriPath =
Application.class.getResource(Application.class.getSimpleName() + ".class").toURI();
String jarStringPath = jarUriPath.toString().replace("jar:", "");
String jarCleanPath = Paths.get(new URI(jarStringPath)).toString();
if (jarCleanPath.toLowerCase().contains(".jar")) {
return jarCleanPath.substring(0, jarCleanPath.lastIndexOf(".jar") + 4);
} else {
return null;
}
} catch (Exception e) {
log.error("Error getting JAR path.", e);
return null;
}
}
My complete code working with a Spring Boot application using CommandLineRunner implementation, to ensure that the application always be executed within of a console view (Double clicks by mistake in JAR file name), I am using the next code:
#SpringBootApplication
public class Application implements CommandLineRunner {
public static void main(String[] args) throws IOException {
Console console = System.console();
if (console == null && !GraphicsEnvironment.isHeadless() && isRunningOverJar()) {
Runtime.getRuntime().exec(new String[]{"cmd", "/c", "start", "cmd", "/k",
"java -jar \"" + getPathJar() + "\""});
} else {
SpringApplication.run(Application.class, args);
}
}
#Override
public void run(String... args) {
/*
Additional code here...
*/
}
private static boolean isRunningOverJar() {
try {
String pathJar = Application.class.getResource(Application.class.getSimpleName() + ".class").getFile();
if (pathJar.toLowerCase().contains(".jar")) {
return true;
} else {
return false;
}
} catch (Exception e) {
return false;
}
}
private static String getPathJar() {
try {
final URI jarUriPath =
Application.class.getResource(Application.class.getSimpleName() + ".class").toURI();
String jarStringPath = jarUriPath.toString().replace("jar:", "");
String jarCleanPath = Paths.get(new URI(jarStringPath)).toString();
if (jarCleanPath.toLowerCase().contains(".jar")) {
return jarCleanPath.substring(0, jarCleanPath.lastIndexOf(".jar") + 4);
} else {
return null;
}
} catch (Exception e) {
return null;
}
}
}

Something that is frustrating is that when you are developing in Eclipse MyClass.class.getProtectionDomain().getCodeSource().getLocation() returns the /bin directory which is great, but when you compile it to a jar, the path includes the /myjarname.jar part which gives you illegal file names.
To have the code work both in the ide and once it is compiled to a jar, I use the following piece of code:
URL applicationRootPathURL = getClass().getProtectionDomain().getCodeSource().getLocation();
File applicationRootPath = new File(applicationRootPathURL.getPath());
File myFile;
if(applicationRootPath.isDirectory()){
myFile = new File(applicationRootPath, "filename");
}
else{
myFile = new File(applicationRootPath.getParentFile(), "filename");
}

Not really sure about the others but in my case it didn't work with a "Runnable jar" and i got it working by fixing codes together from phchen2 answer and another from this link :How to get the path of a running JAR file?
The code:
String path=new java.io.File(Server.class.getProtectionDomain()
.getCodeSource()
.getLocation()
.getPath())
.getAbsolutePath();
path=path.substring(0, path.lastIndexOf("."));
path=path+System.getProperty("java.class.path");

Have tried several of the solutions up there but none yielded correct results for the (probably special) case that the runnable jar has been exported with "Packaging external libraries" in Eclipse. For some reason all solutions based on the ProtectionDomain do result in null in that case.
From combining some solutions above I managed to achieve the following working code:
String surroundingJar = null;
// gets the path to the jar file if it exists; or the "bin" directory if calling from Eclipse
String jarDir = new File(ClassLoader.getSystemClassLoader().getResource(".").getPath()).getAbsolutePath();
// gets the "bin" directory if calling from eclipse or the name of the .jar file alone (without its path)
String jarFileFromSys = System.getProperty("java.class.path").split(";")[0];
// If both are equal that means it is running from an IDE like Eclipse
if (jarFileFromSys.equals(jarDir))
{
System.out.println("RUNNING FROM IDE!");
// The path to the jar is the "bin" directory in that case because there is no actual .jar file.
surroundingJar = jarDir;
}
else
{
// Combining the path and the name of the .jar file to achieve the final result
surroundingJar = jarDir + jarFileFromSys.substring(1);
}
System.out.println("JAR File: " + surroundingJar);

The above methods didn't work for me in my Spring environment, since Spring shades the actual classes into a package called BOOT-INF, thus not the actual location of the running file. I found another way to retrieve the running file through the Permissions object which have been granted to the running file:
public static Path getEnclosingDirectory() {
return Paths.get(FileUtils.class.getProtectionDomain().getPermissions()
.elements().nextElement().getName()).getParent();
}

Mention that it is checked only in Windows but i think it works perfect on other Operating Systems [Linux,MacOs,Solaris] :).
I had 2 .jar files in the same directory . I wanted from the one .jar file to start the other .jar file which is in the same directory.
The problem is that when you start it from the cmd the current directory is system32.
Warnings!
The below seems to work pretty well in all the test i have done even
with folder name ;][[;'57f2g34g87-8+9-09!2##!$%^^&() or ()%&$%^##
it works well.
I am using the ProcessBuilder with the below as following:
🍂..
//The class from which i called this was the class `Main`
String path = getBasePathForClass(Main.class);
String applicationPath= new File(path + "application.jar").getAbsolutePath();
System.out.println("Directory Path is : "+applicationPath);
//Your know try catch here
//Mention that sometimes it doesn't work for example with folder `;][[;'57f2g34g87-8+9-09!2##!$%^^&()`
ProcessBuilder builder = new ProcessBuilder("java", "-jar", applicationPath);
builder.redirectErrorStream(true);
Process process = builder.start();
//...code
🍂getBasePathForClass(Class<?> classs):
/**
* Returns the absolute path of the current directory in which the given
* class
* file is.
*
* #param classs
* #return The absolute path of the current directory in which the class
* file is.
* #author GOXR3PLUS[StackOverFlow user] + bachden [StackOverFlow user]
*/
public static final String getBasePathForClass(Class<?> classs) {
// Local variables
File file;
String basePath = "";
boolean failed = false;
// Let's give a first try
try {
file = new File(classs.getProtectionDomain().getCodeSource().getLocation().toURI().getPath());
if (file.isFile() || file.getPath().endsWith(".jar") || file.getPath().endsWith(".zip")) {
basePath = file.getParent();
} else {
basePath = file.getPath();
}
} catch (URISyntaxException ex) {
failed = true;
Logger.getLogger(classs.getName()).log(Level.WARNING,
"Cannot firgue out base path for class with way (1): ", ex);
}
// The above failed?
if (failed) {
try {
file = new File(classs.getClassLoader().getResource("").toURI().getPath());
basePath = file.getAbsolutePath();
// the below is for testing purposes...
// starts with File.separator?
// String l = local.replaceFirst("[" + File.separator +
// "/\\\\]", "")
} catch (URISyntaxException ex) {
Logger.getLogger(classs.getName()).log(Level.WARNING,
"Cannot firgue out base path for class with way (2): ", ex);
}
}
// fix to run inside eclipse
if (basePath.endsWith(File.separator + "lib") || basePath.endsWith(File.separator + "bin")
|| basePath.endsWith("bin" + File.separator) || basePath.endsWith("lib" + File.separator)) {
basePath = basePath.substring(0, basePath.length() - 4);
}
// fix to run inside netbeans
if (basePath.endsWith(File.separator + "build" + File.separator + "classes")) {
basePath = basePath.substring(0, basePath.length() - 14);
}
// end fix
if (!basePath.endsWith(File.separator)) {
basePath = basePath + File.separator;
}
return basePath;
}

This code worked for me:
private static String getJarPath() throws IOException, URISyntaxException {
File f = new File(LicensingApp.class.getProtectionDomain().().getLocation().toURI());
String jarPath = f.getCanonicalPath().toString();
String jarDir = jarPath.substring( 0, jarPath.lastIndexOf( File.separator ));
return jarDir;
}

The getProtectionDomain approach might not work sometimes e.g. when you have to find the jar for some of the core java classes (e.g in my case StringBuilder class within IBM JDK), however following works seamlessly:
public static void main(String[] args) {
System.out.println(findSource(MyClass.class));
// OR
System.out.println(findSource(String.class));
}
public static String findSource(Class<?> clazz) {
String resourceToSearch = '/' + clazz.getName().replace(".", "/") + ".class";
java.net.URL location = clazz.getResource(resourceToSearch);
String sourcePath = location.getPath();
// Optional, Remove junk
return sourcePath.replace("file:", "").replace("!" + resourceToSearch, "");
}

I have another way to get the String location of a class.
URL path = Thread.currentThread().getContextClassLoader().getResource("");
Path p = Paths.get(path.toURI());
String location = p.toString();
The output String will have the form of
C:\Users\Administrator\new Workspace\...
The spaces and other characters are handled, and in the form without file:/. So will be easier to use.

Access external .jar resources from java

I am working on a multi module Java project, it consists of multiple projects in Eclipse that depend on each other, now to add GUI Theme support I have created a Java project that does not contain any code, just the icons and pictures needed for the GUI, I made it a Java project so Maven will build it into a .jar. Now there's a main Application that loads the multiple projects into a main GUI, which gets its icons from resources within the actual modules at the moment. All I want to do is load all these resources from the external dummy .jar that is included in the classpath of the main application's .jar. Every method I have found so far does not seem to work. The .jar contains no actual java .classes, so there is no ClassLoader to reference. Are there any other methods to load the pictures without extracting the .jar?

Three things you might try:
Create a dummy class in the resource jar, which you could use to get the ClassLoader reference.
Use URLClassLoader, if you know, where your jar-File resides.
You always have the possibility to create your own ClassLoader by extending java.lang.ClassLoader.

Treat the external jar file as a zip-archive and read the images/resource something like this:
public ZipStuff(String filename) throws IOException
{
ZipFile zf = new ZipFile(filename);
Enumeration<? extends ZipEntry> entries = zf.entries();
while (entries.hasMoreElements()) {
ZipEntry ze = entries.nextElement();
ImageIcon ii = new ImageIcon(ImageIO.read(zf.getInputStream(ze)));
JLabel l = new JLabel(ii);
getContentPane().add(l);
}
setVisible(true);
pack();
}
In this case I have a jar file with one single image which I load into a JLabel. The ZipStuff-class is a JFrame.

You could get all of the resources (all jar files on classpath should work even one without classes):
Enumeration<URL> resources = null;
try {
resources = Thread.currentThread().getContextClassLoader().getResources(someResource);
} catch (Exception ex) {
//no op
}
if (resources == null || !resources.hasMoreElements()) {
resources = ClasspathReader.class.getClassLoader().getResources(someResource);
}
Then check to see if the current resource is a file. Files you can deal with direct as files.
But your question was about jar files so I wont go there.
while (resources.hasMoreElements()) {
URL resource = resources.nextElement();
if (resource.getProtocol().equals("file")) {
//if it is a file then we can handle it the normal way.
handleFile(resource, namespace);
continue;
}
At this point you should have only jar:file resources so...
Split up the string that looks like this:
jar:file:/Users/rick/.m2/repository/invoke/invoke/1.0-SNAPSHOT/invoke-1.0-SNAPSHOT.jar!/org/node/
into this
/Users/rick/.m2/repository/invoke/invoke/1.0-SNAPSHOT/invoke-1.0-SNAPSHOT.jar
and this
/org/node/
Here is the code to do the above devoid of pesky error checking. :)
String[] split = resource.toString().split(":");
String[] split2 = split[2].split("!");
String zipFileName = split2[0];
String sresource = split2[1];
System.out.printf("After split zip file name = %s," +
" \nresource in zip %s \n", zipFileName, sresource);
Now we have the zip file name so we can read it:
ZipFile zipFile = new ZipFile(zipFileName);
Now we can iterate through its entries:
Enumeration<? extends ZipEntry> entries = zipFile.entries();
while (entries.hasMoreElements()) {
ZipEntry entry = entries.nextElement();
/* If it is a directory, then skip it. */
if (entry.isDirectory()) {
continue;
}
String entryName = entry.getName();
System.out.printf("zip entry name %s \n", entryName);
See if it starts with the resource we are looking for.
if (!entryName.startsWith(someResource)) {
continue;
}
There were two tricks I did earlier to see if it was a directory
boolean isDir = !someResource.endsWith(".txt");
This only works because I am looking for resources that ends with .txt and I assume if it does not end with .txt that it is an dir /foo/dir and /foo/dir/ both work.
The other trick was this:
if (someResource.startsWith("/")) {
someResource = someResource.substring(1);
}
Classpath resource can never really start with a starting slash. Logically they do, but in reality you have to strip it. This is a known behavior of classpath resources. It works with a slash unless the resource is in a jar file. Bottom line, by stripping it, it always works.
We need to get the actual fileName of the darn thing. The fileName part from the entry name.
where /foo/bar/foo/bee/bar.txt, and we want 'bar.txt' which is the fileName. Back inside of our while loop.
while (entries.hasMoreElements()) {
ZipEntry entry = entries.nextElement();
...
String entryName = entry.getName(); //entry is zipEntry
String fileName = entryName.substring(entryName.lastIndexOf("/") + 1);
/** See if the file starts with our namespace and ends with our extension. */
if (fileName.startsWith(namespace) && fileName.endsWith(".txt")) {
Next we see if these entry matches our criteria and if so read contents of the file to System.out.
try (Reader reader = new InputStreamReader(zipFile.getInputStream(entry))) {
StringBuilder builder = new StringBuilder();
int ch = 0;
while ((ch = reader.read()) != -1) {
builder.append((char) ch);
}
System.out.printf("zip fileName = %s\n\n####\n contents of file %s\n###\n",
entryName, builder);
} catch (Exception ex) {
ex.printStackTrace();//it is an example/proto :)
}
}
You can see the full example here: Sleepless in Pleasanton.

How do I read a resource file from a Java jar file?

I'm trying to access an XML file within a jar file, from a separate jar that's running as a desktop application. I can get the URL to the file I need, but when I pass that to a FileReader (as a String) I get a FileNotFoundException saying "The file name, directory name, or volume label syntax is incorrect."
As a point of reference, I have no trouble reading image resources from the same jar, passing the URL to an ImageIcon constructor. This seems to indicate that the method I'm using to get the URL is correct.
URL url = getClass().getResource("/xxx/xxx/xxx/services.xml");
ServicesLoader jsl = new ServicesLoader( url.toString() );
Inside the ServicesLoader class I have
XMLReader xr = XMLReaderFactory.createXMLReader();
xr.setContentHandler( this );
xr.setErrorHandler( this );
xr.parse( new InputSource( new FileReader( filename )));
What's wrong with using this technique to read the XML file?

Looks like you want to use java.lang.Class.getResourceAsStream(String), see
https://docs.oracle.com/javase/8/docs/api/java/lang/Class.html#getResourceAsStream-java.lang.String-

You don't say if this is a desktop or web app. I would use the getResourceAsStream() method from an appropriate ClassLoader if it's a desktop or the Context if it's a web app.

It looks as if you are using the URL.toString result as the argument to the FileReader constructor. URL.toString is a bit broken, and instead you should generally use url.toURI().toString(). In any case, the string is not a file path.
Instead, you should either:
Pass the URL to ServicesLoader and let it call openStream or similar.
Use Class.getResourceAsStream and just pass the stream over, possibly inside an InputSource. (Remember to check for nulls as the API is a bit messy.)

The problem was that I was going a step too far in calling the parse method of XMLReader. The parse method accepts an InputSource, so there was no reason to even use a FileReader. Changing the last line of the code above to
xr.parse( new InputSource( filename ));
works just fine.

I'd like to point out that one issues is what if the same resources are in multiple jar files.
Let's say you want to read /org/node/foo.txt, but not from one file, but from each and every jar file.
I have run into this same issue several times before.
I was hoping in JDK 7 that someone would write a classpath filesystem, but alas not yet.
Spring has the Resource class which allows you to load classpath resources quite nicely.
I wrote a little prototype to solve this very problem of reading resources form multiple jar files. The prototype does not handle every edge case, but it does handle looking for resources in directories that are in the jar files.
I have used Stack Overflow for quite sometime. This is the second answer that I remember answering a question so forgive me if I go too long (it is my nature).
This is a prototype resource reader. The prototype is devoid of robust error checking.
I have two prototype jar files that I have setup.
<pre>
<dependency>
<groupId>invoke</groupId>
<artifactId>invoke</artifactId>
<version>1.0-SNAPSHOT</version>
</dependency>
<dependency>
<groupId>node</groupId>
<artifactId>node</artifactId>
<version>1.0-SNAPSHOT</version>
</dependency>
The jar files each have a file under /org/node/ called resource.txt.
This is just a prototype of what a handler would look like with classpath://
I also have a resource.foo.txt in my local resources for this project.
It picks them all up and prints them out.
package com.foo;
import java.io.File;
import java.io.FileReader;
import java.io.InputStreamReader;
import java.io.Reader;
import java.net.URI;
import java.net.URL;
import java.util.Enumeration;
import java.util.zip.ZipEntry;
import java.util.zip.ZipFile;
/**
* Prototype resource reader.
* This prototype is devoid of error checking.
*
*
* I have two prototype jar files that I have setup.
* <pre>
* <dependency>
* <groupId>invoke</groupId>
* <artifactId>invoke</artifactId>
* <version>1.0-SNAPSHOT</version>
* </dependency>
*
* <dependency>
* <groupId>node</groupId>
* <artifactId>node</artifactId>
* <version>1.0-SNAPSHOT</version>
* </dependency>
* </pre>
* The jar files each have a file under /org/node/ called resource.txt.
* <br />
* This is just a prototype of what a handler would look like with classpath://
* I also have a resource.foo.txt in my local resources for this project.
* <br />
*/
public class ClasspathReader {
public static void main(String[] args) throws Exception {
/* This project includes two jar files that each have a resource located
in /org/node/ called resource.txt.
*/
/*
Name space is just a device I am using to see if a file in a dir
starts with a name space. Think of namespace like a file extension
but it is the start of the file not the end.
*/
String namespace = "resource";
//someResource is classpath.
String someResource = args.length > 0 ? args[0] :
//"classpath:///org/node/resource.txt"; It works with files
"classpath:///org/node/"; //It also works with directories
URI someResourceURI = URI.create(someResource);
System.out.println("URI of resource = " + someResourceURI);
someResource = someResourceURI.getPath();
System.out.println("PATH of resource =" + someResource);
boolean isDir = !someResource.endsWith(".txt");
/** Classpath resource can never really start with a starting slash.
* Logically they do, but in reality you have to strip it.
* This is a known behavior of classpath resources.
* It works with a slash unless the resource is in a jar file.
* Bottom line, by stripping it, it always works.
*/
if (someResource.startsWith("/")) {
someResource = someResource.substring(1);
}
/* Use the ClassLoader to lookup all resources that have this name.
Look for all resources that match the location we are looking for. */
Enumeration resources = null;
/* Check the context classloader first. Always use this if available. */
try {
resources =
Thread.currentThread().getContextClassLoader().getResources(someResource);
} catch (Exception ex) {
ex.printStackTrace();
}
if (resources == null || !resources.hasMoreElements()) {
resources = ClasspathReader.class.getClassLoader().getResources(someResource);
}
//Now iterate over the URLs of the resources from the classpath
while (resources.hasMoreElements()) {
URL resource = resources.nextElement();
/* if the resource is a file, it just means that we can use normal mechanism
to scan the directory.
*/
if (resource.getProtocol().equals("file")) {
//if it is a file then we can handle it the normal way.
handleFile(resource, namespace);
continue;
}
System.out.println("Resource " + resource);
/*
Split up the string that looks like this:
jar:file:/Users/rick/.m2/repository/invoke/invoke/1.0-SNAPSHOT/invoke-1.0-SNAPSHOT.jar!/org/node/
into
this /Users/rick/.m2/repository/invoke/invoke/1.0-SNAPSHOT/invoke-1.0-SNAPSHOT.jar
and this
/org/node/
*/
String[] split = resource.toString().split(":");
String[] split2 = split[2].split("!");
String zipFileName = split2[0];
String sresource = split2[1];
System.out.printf("After split zip file name = %s," +
" \nresource in zip %s \n", zipFileName, sresource);
/* Open up the zip file. */
ZipFile zipFile = new ZipFile(zipFileName);
/* Iterate through the entries. */
Enumeration entries = zipFile.entries();
while (entries.hasMoreElements()) {
ZipEntry entry = entries.nextElement();
/* If it is a directory, then skip it. */
if (entry.isDirectory()) {
continue;
}
String entryName = entry.getName();
System.out.printf("zip entry name %s \n", entryName);
/* If it does not start with our someResource String
then it is not our resource so continue.
*/
if (!entryName.startsWith(someResource)) {
continue;
}
/* the fileName part from the entry name.
* where /foo/bar/foo/bee/bar.txt, bar.txt is the file
*/
String fileName = entryName.substring(entryName.lastIndexOf("/") + 1);
System.out.printf("fileName %s \n", fileName);
/* See if the file starts with our namespace and ends with our extension.
*/
if (fileName.startsWith(namespace) && fileName.endsWith(".txt")) {
/* If you found the file, print out
the contents fo the file to System.out.*/
try (Reader reader = new InputStreamReader(zipFile.getInputStream(entry))) {
StringBuilder builder = new StringBuilder();
int ch = 0;
while ((ch = reader.read()) != -1) {
builder.append((char) ch);
}
System.out.printf("zip fileName = %s\n\n####\n contents of file %s\n###\n", entryName, builder);
} catch (Exception ex) {
ex.printStackTrace();
}
}
//use the entry to see if it's the file '1.txt'
//Read from the byte using file.getInputStream(entry)
}
}
}
/**
* The file was on the file system not a zip file,
* this is here for completeness for this example.
* otherwise.
*
* #param resource
* #param namespace
* #throws Exception
*/
private static void handleFile(URL resource, String namespace) throws Exception {
System.out.println("Handle this resource as a file " + resource);
URI uri = resource.toURI();
File file = new File(uri.getPath());
if (file.isDirectory()) {
for (File childFile : file.listFiles()) {
if (childFile.isDirectory()) {
continue;
}
String fileName = childFile.getName();
if (fileName.startsWith(namespace) && fileName.endsWith("txt")) {
try (FileReader reader = new FileReader(childFile)) {
StringBuilder builder = new StringBuilder();
int ch = 0;
while ((ch = reader.read()) != -1) {
builder.append((char) ch);
}
System.out.printf("fileName = %s\n\n####\n contents of file %s\n###\n", childFile, builder);
} catch (Exception ex) {
ex.printStackTrace();
}
}
}
} else {
String fileName = file.getName();
if (fileName.startsWith(namespace) && fileName.endsWith("txt")) {
try (FileReader reader = new FileReader(file)) {
StringBuilder builder = new StringBuilder();
int ch = 0;
while ((ch = reader.read()) != -1) {
builder.append((char) ch);
}
System.out.printf("fileName = %s\n\n####\n contents of file %s\n###\n", fileName, builder);
} catch (Exception ex) {
ex.printStackTrace();
}
}
}
}
}
You can see a fuller example here with the sample output.

Here's a sample code on how to read a file properly inside a jar file (in this case, the current executing jar file)
Just change executable with the path of your jar file if it is not the current running one.
Then change the filePath to the path of the file you want to use inside the jar file. I.E. if your file is in
someJar.jar\img\test.gif
. Set the filePath to "img\test.gif"
File executable = new File(BrowserViewControl.class.getProtectionDomain().getCodeSource().getLocation().toURI());
JarFile jar = new JarFile(executable);
InputStream fileInputStreamReader = jar.getInputStream(jar.getJarEntry(filePath));
byte[] bytes = new byte[fileInputStreamReader.available()];
int sizeOrig = fileInputStreamReader.available();
int size = fileInputStreamReader.available();
int offset = 0;
while (size != 0){
fileInputStreamReader.read(bytes, offset, size);
offset = sizeOrig - fileInputStreamReader.available();
size = fileInputStreamReader.available();
}

Outside of your technique, why not use the standard Java JarFile class to get the references you want? From there most of your problems should go away.

If you use resources extensively, you might consider using
Commons VFS.
Also supports:
* Local Files
* FTP, SFTP
* HTTP and HTTPS
* Temporary Files "normal FS backed)
* Zip, Jar and Tar (uncompressed, tgz or tbz2)
* gzip and bzip2
* resources
* ram - "ramdrive"
* mime
There's also JBoss VFS - but it's not much documented.

I have 2 CSV files that I use to read data. The java program is exported as a runnable jar file. When you export it, you will figure out it doesn't export your resources with it.
I added a folder under project called data in eclipse. In that folder i stored my csv files.
When I need to reference those files I do it like this...
private static final String ZIP_FILE_LOCATION_PRIMARY = "free-zipcode-database-Primary.csv";
private static final String ZIP_FILE_LOCATION = "free-zipcode-database.csv";
private static String getFileLocation(){
String loc = new File("").getAbsolutePath() + File.separatorChar +
"data" + File.separatorChar;
if (usePrimaryZipCodesOnly()){
loc = loc.concat(ZIP_FILE_LOCATION_PRIMARY);
} else {
loc = loc.concat(ZIP_FILE_LOCATION);
}
return loc;
}
Then when you put the jar in a location so it can be ran via commandline, make sure that you add the data folder with the resources into the same location as the jar file.