I am very new to jxfs things. I have a requirement to call jxfs server which is in cloud server from the jxfs client which is in ATM environment.. How can i call?.. I need to call this one through the Jxfs RMI concept. It would be appreciated one if any example code is available. If atleast you are having code for calling from jxfs server to jxfs client, please post it.
Thanks in advance guys.
One of the interesting things about J/XFS and remote device access (based on RMI) is that it is just matter of configuration.
You need to configure a J/XFS repository in order to handle a remote device (basically set 'remoteAccess' to true).
Then accessing these devices from the programming point of view is just the same as they were local devices.
Architecture is explained here: ftp://ftp.cencenelec.eu/CWA/CEN/WS-J-XFS/cwa14923/cwa14923-01-2004-May.pdf
Details, when programming may differ depending on the J/XFS implementation you are using.
Trying to answer your question below:
Whenever you want to access a device remotely in J/XFS, RMI is used. You need to make the following setup:
On a server (should be accessible) you need to start a JxfsServer. The JxfsServer will use a Read.repository
whith all the ATM's and devices configured on them as workstations, with the right IP addresses.
On the ATM, you need to install:
J/XFS libs
J/XFS device services for the devices on the ATM
Setup the DSstarter:
Will use the SpecificDeviceManagerRMI connecting to the JxfsServer you started before.
On your server (cloud) wherever you are going to use the J/XFS client you can get the remote controls by performing
the J/XFS initialization as follows:
jxfsDM_ = JxfsDeviceManager.getReference();
jxfsDM_.initialize("com.jxfs.forum.communication.rmi.SpecificDeviceManagerRMI,<atmWorkstation>,AppTest,2006;<jxfsserverhostname>,");
Then you can get the remote device controls with getDevice(...), and start using them as if they were local devices.
Please, note that handling RMI ports can be tricky, specially in a secured environment as ATM network. Make sure all the ports you need are open.
Related
I basically need to create a test server, something that I can use locally to perform tasks for my application.
So my android app is basically a search engine, however the search queries will be made on the server and the results then fetched from the server on the mobile device as JSON objects.
Is there any way to replicate this functionality locally? I would just like to set up a server, include the Spring framework, the Google Custom Search API and develop it all in Java, then ship it to a live server directly when it's finished. (Most presumably a free tier Amazon AWS server, either EC2 or Lambda, not sure what the difference is).
Not quite sure where or how to get started so any help is appreciated, thank you!
p.s. I may try dabbling in some machine learning at a later date, but I don't know if this will affect anything, this will most likely be after I've got a live server up and running.
EDIT: Sorry, so how would I fetch data from a local server from my mobile device? Do I need special software? Do I need to configure a local server? How can my mobile device fetch data from a second project when its being run on the first?
My app will fetch data from a server, so how can I create a dummy server, for it to fetch data from? Will I need to create a fully functioning online server, or can this just be done through creating a local server of some sort and then simply plugging my android device in and running the code? I have absolutely no idea how to test it without putting it online.
You can run a local installation of Tomcat server on your own machine.
Access the server by visiting "http://localhost:8080/" (or) http://127.0.0.1:8080". You can basically listening to your own local machine / host's 8080 port. Sometimes, it could be port 80 instead of 8080.
Please explore on how to host a Spring or Java application on a local server.
A good starting point would be to learn J2EE or Enterprise Java. You can configure Databases from your local installation.
If you opt for PHP as your language on server side, there is a pre-defined package called WAMP (for Windows), LAMP (for Linux), MAMP (for MAC) and XAMPP.
The above package are nothing but a package which contains a Server, Database and a Server side language usually PHP, if needed Python or Perl.
Please explain in which step you are getting issues so that anyone can help you exactly.
I am working on an application where I need to establish a server on a Windows/Linux/Mac machine which will need to communicate to an Android/iOS device over an existing WiFi network.
I am just in the research phase for now, and though I can find answers for communicating between PC-Android, PC-iOS, Mac-iOS etcetera, I cannot find an answer using which I can do all of it.
The mobile application will be different for both the platforms, of-course, but the server application should ideally be the same, and should be cross-platform.
I should also mention that the server and the clients(mobile-apps) will maintain a 1:n relation, meaning that several Android/iOS devices will be communicating with the server at once.
I need advice on which language/library shall I use for the server which would let the it communicate to both the mobile platforms.
Advice on the libraries I should use for the mobile platforms will also be helpful, though it's not important until I complete the server.
I am just looking for links to helpful resources, though I will be very grateful if you share some code.
I shall also mention, I know Python/Java/C++ which I can use for the server, but you are open to suggest another language which may make the work easier.
EDIT: What I forgot to mention is that, this will be a local server, that is, it needs to communicate with these devices on a LAN (devices on the same wifi network).
If you Know Java for the server side you cab create an application that hosts a RestFull API running on a tomcat server that you call with a local address (such as http://ip_adress:port/appname)
Tomcat can run on Windows, Linux or Mac.
If you need more informations just ask
I'm developing an Android application and want it to connect to an OpenVPN Server.
Since Android 4.0 there is a VPNService class. This class however needs to intercept all the network packets(and require special permissions) because it is apperently running on the Internet Protocol. However as far as I understand, OpenVPN is running on-top of TCP or UDP(my server is configured to use UDP). I only need to tunnel the traffic from my own application through the VPN tunnel.
Shouldn't it theoretically be possible to avoid this(because I don't need to intercept all the traffic, but only the UDP-OpenVPN packets targeting my application)?
Do you know of a library for Android that fulfills my needs?
If not, would it be possible to implement the OpenVPN protocol in Android on-top of UDP without the need of the VPNService class?
I found the follwing project: ics-openvpn. However it also uses the VPNService class and intercepts all the packages.
Sure, you can theoretically do UDP/OpenVPN in userspace/inside your app. But you would need to implement the whole TCP/IP inside your app since you need to emulate the whole VPN stack.
For a one app VPN like solution you are probably much better of using a SOCKS/HTTP proxy etc. library.
You need to use VpnService for creating an application of OpenVPN which takes ovpn file as input for configuration on client side like OpenVPN Connect. So any person can change configuration according to their need. Also, you have to configure the server for OpenVPN. Take server of AWS EC2 or any other. While in configuring VPN on server side follow this link.
I want to connect my android application to an applet which is running on my pc on Google chrome on Wi-fi.. where my phone works as a wi-fi hotspot and pc as the connected device. I want the connection to work uniquely as I want commands to be passed from my application to the specific applet, on the execution of which my applet does specific tasks. Please tell me the APIs which I can look in both Java and Android or the technology I have to use to make it work..
You need to use any program, such as wamp server, to make your computer to be a localserver. It will install PHP 5, MySQL and Apache. In other hand, you will also need a little bit of knowledge in Php language to create you own web services.
Another thing you need to be aware is that to handle you connection between server and device (and by this I mean which IP you are going to use) you will have a little headache; but first things first..break your problem in little parts thus will be easier to solve them.
I recommend this tutorial.
I think the simple way to connect these two softwares is using UDP.
It is fast, it is easy to program but it is generally unreliable according to TCP. But it is already local network. I dont think that is a case you need to take care in your local wifi network.
So take a look at this tutorial http://tutorials.jenkov.com/java-networking/udp-datagram-sockets.html
There are other ways like https://www.alljoyn.org/. It has more functinality but more complicated.
You must install Server on your PC(Apache httpd or apache tomcat or other based on your interest). A server listens to request from clients. When your mobile is connected to your pc(doesn't matter wire or wireless), you can make a request to an url(say, localhost:8080/welcome) from your app.
Create an applet and connect it with your web application(in the server) using java.net.URL and java.net.URLConnection.
On performing some operation on the client, call the url of the server application and forward the response to the applet.
Initially, ip-addresses from the ISP are always changing. I am working on an android app and I need to connect from outside my home to my internal network. I need a server connected to my modem/router and the server should save the public ip of my home network every time it changes.
Goal: make a communication between my android app and the modem/router.
My question is:
Do I have to program an app on the server side to do this job, or is there an app already available?
If none are available, could you please tell me the steps to create one, or any references to that end?
Thank you!
I think your best bet is to use a dynamic dns service. That will allow you to give your machine a string name, run the app they'll give you (or many routers support this built-in), and just reference the computer by name when you need it. See http://en.wikipedia.org/wiki/Dynamic_DNS