Develop Reference

Get folder from Resources folder JAVA

Hi everyone I can't figure out with this problem : this line of code should work
File[] file = (new File(getClass().getResource("resources/images_resultats"))).listFiles();
I want a list of File, these Files are under "images_resultats" under "resources".

It won't work if resources/images_resultats is not in your classpath and/or if it is in a jar file.
Your code is not even correct it should something like:
File[] file = (new File(getClass().getResource("/my/path").toURI())).listFiles();

You can determine what files are in a folder in resources (even if its in a jar) using the FileSystem class.
public static void doSomethingWithResourcesFolder(String inResourcesPath) throws URISyntaxException {
URI uri = ResourcesFolderUts.class.getResource(inResourcesPath).toURI();
try( FileSystem fileSystem = FileSystems.newFileSystem(uri, Collections.emptyMap() ) ){
Path folderRootPath = fileSystem.getPath(inResourcesPath);
Stream<Path> walk = Files.walk(folderRootPath, 1);
walk.forEach(childFileOrFolder -> {
//do something with the childFileOrFolder
});
} catch (IOException e) {
throw new RuntimeException(e);
}
}
inResourcesPath should be something like "/images_resultats"
Note that the childFileOrFolder paths can only be used while the FileSystem remains open, if you try to (for example) return the paths then use them later you've get a file system closed exception.
Change ResourcesFolderUts for one of your own classes

Assuming that resources folder is in classpath, this might work.
String folder = getClass().getResource("images_resultats").getFile();
File[] test = new File(folder).listFiles();

Moving file from one directory to another and delete from source directory using java

I am trying to move files from one directory to another delete that file from source directory after moving.
for (File file : files) {
if (file != null) {
boolean status = moveFile(file, filePath, name, docGroupId);
if (status) {
//some operations....
}
}
}
public static boolean moveFile(final File file, final String filePath, final String groupName, Integer docGroupId) {
// TODO Auto-generated method stub
String selectedDirectory = filePath + File.separator + groupName;
InputStream in = null;
OutputStream out = null;
try {
if (!file.isDirectory()) {
File dir = new File(selectedDirectory);
if (!dir.exists()) {
dir.mkdirs();
}
String newFilString = dir.getAbsolutePath() +
File.separator + file.getName();
File newFile = new File(newFilString);
in = new FileInputStream(file);
out = new FileOutputStream(newFile);
byte[] moveBuff = new byte[1024];
int butesRead;
while ((butesRead = in.read(moveBuff)) > 0) {
out.write(moveBuff, 0, butesRead);
}
}
in.close();
out.close();
if(file.delete())
return true;
} catch (Exception e) {
return false;
}
}
The program works on Linux-Ubuntu and all files are moved to another directory and deleted from source directory, but in Windows system all files are moved but failed to delete one or two files from source directory. Please note that while debugging the program is working fine.

Consider using Files.delete instead of File.delete. The javadoc says:
Note that the Files class defines the delete method to throw an IOException when a file cannot be deleted. This is useful for error reporting and to diagnose why a file cannot be deleted.
This should provide the information necessary to diagnose the problem.

So, if problem comes with delete, possible explanations:
you do file.delete() on every files and directories. How do you know the directory is empty ? If not, it will fail, then what happen to next instructions ?
file deletion is OS-dependant. On Windows, you can have many security issues, depending on which user, which rights, which location. You should check with a file-delete-alone program;
last: files can be locked by other programs (even explorer), it is also OS-dependant.

You don't need any of this if the source and target are in the same file system. Just use File.renameTo().

How to read File Objects out of a jar

I have a jar file that contains a folder structure ie...
jar/com/foo/bar/images
Inside the Images directory I have several images. I have tried to read them out with getResourceAsStream() and also attempted to get at them via ZipEntries.
All of my attempts have been fruitless, if someone could please give me an example on how this would be done.
P.S don't worry about closing resources and error handling etc. I will be able to put that part in.
Thanks for the help.
here is the zipfile entry code I tried
private File[] getFilesFromPath(String location) {
File[] files = null;
try {
CodeSource src = this.getClass().getProtectionDomain().getCodeSource();
if (src != null) {
URL jar = src.getLocation();
ZipInputStream zip = new ZipInputStream(jar.openStream());
while(true) {
ZipEntry e = zip.getNextEntry();
if (e == null)
break;
String name = e.getName();
if (name.endsWith(location)) {
files = new File(name).listFiles((new FileFilter() {
#Override
public boolean accept(File f) {
return f.isFile();
}
}));
for (File file : files){
System.out.println(file.getName());
}
}
}
}
}catch (IOException e) {
e.printStackTrace();
}
return files;
}

The following code should work in your case as I already used following code to read hbm files from an existing jar to create dynamic session factory. It is simply reading the jar file and yhen looking image folder for given location(com/foo/bar/images) then it assume that all the file in this folder are image file. It convert file to Input stream.
Change the JARCLASSNAME to the one of your class name from jar file.
CodeSource src = JARCLASSNAME.class.getProtectionDomain().getCodeSource();
if (src != null) {
URL jar = src.getLocation();
ZipInputStream zip = new ZipInputStream(jar.openStream());
while(true) {
ZipEntry e = zip.getNextEntry();
if (e == null)
break;
String name = e.getName();
// Check the folder name if folder name match then only read the file
if (name.startsWith("com/foo/bar/images")) {
InputStream inputStream =JARCLASSNAME.class.getClassLoader().getResourceAsStream(name);
}
}
}

How about constructin a URL image?
URL imageURL = JARFILENAME.class.getResource.("pic1.gif");
then make the image like this:
Image yourImage = Toolkit.getDefaultToolKit().getImage(imageURL);
URL: http://www.daniweb.com/software-development/java/threads/21906/accessing-images-in-jar-file

Filtering files in a directory in Java

public class Sorter {
String dir1 = ("C:/Users/Drew/Desktop/test");
String dir2 = ("C:/Users/Drew/Desktop/");
public void SortingAlgo() throws IOException {
// Declare files for moving
File sourceDir = new File(dir1);
File destDir = new File(dir2);
//Get files, list them, grab only mp3 out of the pack, and sort
File[] listOfFiles = sourceDir.listFiles();
if(sourceDir.isDirectory()) {
for(int i = 0; i < listOfFiles.length; i++) {
//list Files
System.out.println(listOfFiles[i]);
String ext = FilenameUtils.getExtension(dir1);
System.out.println(ext);
}
}
}
}
I am trying to filter out only .mp3's in my program. I'm obviously a beginner and tried copying some things off of Google and this website. How can I set a directory (sourceDir) and move those filtered files to it's own folder?

File provides an ability to filter the file list as it's begin generated.
File[] listOfFiles = sourceDir.listFiles(new FileFilter() {
#Override
public boolean accept(File pathname) {
return pathname.getName().toLowerCase().endsWith(".mp3");
}
});
Now, this has a number of benefits, the chief among which is you don't need to post-process the list, again, or have two lists in memory at the same time.
It also provides pluggable capabilities. You could create a MP3FileFilter class for instance and re-use it.

I find the NIO.2 approach using GLOBs or custom filter the cleanest solution. Check out this example on how to use GLOB or filter example in the attached link:
Path directoryPath = Paths.get("C:", "Program Files/Java/jdk1.7.0_40/src/java/nio/file");
if (Files.isDirectory(directoryPath)) {
try (DirectoryStream<Path> stream = Files.newDirectoryStream(directoryPath, "*.mp3")) {
for (Path path : stream) {
System.out.println(path);
}
} catch (IOException e) {
throw new RuntimeException(e);
}
}
For more information about content listing and directory filtering visit Listing and filtering directory contents in NIO.2

if(ext.endWith(".mp3")){
//do what ever you want
}

How can I access a folder inside of a resource folder from inside my jar File?

I have a resources folder/package in the root of my project, I "don't" want to load a certain File. If I wanted to load a certain File, I would use class.getResourceAsStream and I would be fine!! What I actually want to do is to load a "Folder" within the resources folder, loop on the Files inside that Folder and get a Stream to each file and read in the content... Assume that the File names are not determined before runtime... What should I do? Is there a way to get a list of the files inside a Folder in your jar File?
Notice that the Jar file with the resources is the same jar file from which the code is being run...

Finally, I found the solution:
final String path = "sample/folder";
final File jarFile = new File(getClass().getProtectionDomain().getCodeSource().getLocation().getPath());
if(jarFile.isFile()) { // Run with JAR file
final JarFile jar = new JarFile(jarFile);
final Enumeration<JarEntry> entries = jar.entries(); //gives ALL entries in jar
while(entries.hasMoreElements()) {
final String name = entries.nextElement().getName();
if (name.startsWith(path + "/")) { //filter according to the path
System.out.println(name);
}
}
jar.close();
} else { // Run with IDE
final URL url = Launcher.class.getResource("/" + path);
if (url != null) {
try {
final File apps = new File(url.toURI());
for (File app : apps.listFiles()) {
System.out.println(app);
}
} catch (URISyntaxException ex) {
// never happens
}
}
}
The second block just work when you run the application on IDE (not with jar file), You can remove it if you don't like that.

Try the following.
Make the resource path "<PathRelativeToThisClassFile>/<ResourceDirectory>" E.g. if your class path is com.abc.package.MyClass and your resoure files are within src/com/abc/package/resources/:
URL url = MyClass.class.getResource("resources/");
if (url == null) {
// error - missing folder
} else {
File dir = new File(url.toURI());
for (File nextFile : dir.listFiles()) {
// Do something with nextFile
}
}
You can also use
URL url = MyClass.class.getResource("/com/abc/package/resources/");

The following code returns the wanted "folder" as Path regardless of if it is inside a jar or not.
private Path getFolderPath() throws URISyntaxException, IOException {
URI uri = getClass().getClassLoader().getResource("folder").toURI();
if ("jar".equals(uri.getScheme())) {
FileSystem fileSystem = FileSystems.newFileSystem(uri, Collections.emptyMap(), null);
return fileSystem.getPath("path/to/folder/inside/jar");
} else {
return Paths.get(uri);
}
}
Requires java 7+.

I know this is many years ago . But just for other people come across this topic.
What you could do is to use getResourceAsStream() method with the directory path, and the input Stream will have all the files name from that dir. After that you can concat the dir path with each file name and call getResourceAsStream for each file in a loop.

I had the same problem at hands while i was attempting to load some hadoop configurations from resources packed in the jar... on both the IDE and on jar (release version).
I found java.nio.file.DirectoryStream to work the best to iterate over directory contents over both local filesystem and jar.
String fooFolder = "/foo/folder";
....
ClassLoader classLoader = foofClass.class.getClassLoader();
try {
uri = classLoader.getResource(fooFolder).toURI();
} catch (URISyntaxException e) {
throw new FooException(e.getMessage());
} catch (NullPointerException e){
throw new FooException(e.getMessage());
}
if(uri == null){
throw new FooException("something is wrong directory or files missing");
}
/** i want to know if i am inside the jar or working on the IDE*/
if(uri.getScheme().contains("jar")){
/** jar case */
try{
URL jar = FooClass.class.getProtectionDomain().getCodeSource().getLocation();
//jar.toString() begins with file:
//i want to trim it out...
Path jarFile = Paths.get(jar.toString().substring("file:".length()));
FileSystem fs = FileSystems.newFileSystem(jarFile, null);
DirectoryStream<Path> directoryStream = Files.newDirectoryStream(fs.getPath(fooFolder));
for(Path p: directoryStream){
InputStream is = FooClass.class.getResourceAsStream(p.toString()) ;
performFooOverInputStream(is);
/** your logic here **/
}
}catch(IOException e) {
throw new FooException(e.getMessage());
}
}
else{
/** IDE case */
Path path = Paths.get(uri);
try {
DirectoryStream<Path> directoryStream = Files.newDirectoryStream(path);
for(Path p : directoryStream){
InputStream is = new FileInputStream(p.toFile());
performFooOverInputStream(is);
}
} catch (IOException _e) {
throw new FooException(_e.getMessage());
}
}

Another solution, you can do it using ResourceLoader like this:
import org.springframework.core.io.Resource;
import org.apache.commons.io.FileUtils;
#Autowire
private ResourceLoader resourceLoader;
...
Resource resource = resourceLoader.getResource("classpath:/path/to/you/dir");
File file = resource.getFile();
Iterator<File> fi = FileUtils.iterateFiles(file, null, true);
while(fi.hasNext()) {
load(fi.next())
}

If you are using Spring you can use org.springframework.core.io.support.PathMatchingResourcePatternResolver and deal with Resource objects rather than files. This works when running inside and outside of a Jar file.
PathMatchingResourcePatternResolver r = new PathMatchingResourcePatternResolver();
Resource[] resources = r.getResources("/myfolder/*");
Then you can access the data using getInputStream and the filename from getFilename.
Note that it will still fail if you try to use the getFile while running from a Jar.

As the other answers point out, once the resources are inside a jar file, things get really ugly. In our case, this solution:
https://stackoverflow.com/a/13227570/516188
works very well in the tests (since when the tests are run the code is not packed in a jar file), but doesn't work when the app actually runs normally. So what I've done is... I hardcode the list of the files in the app, but I have a test which reads the actual list from disk (can do it since that works in tests) and fails if the actual list doesn't match with the list the app returns.
That way I have simple code in my app (no tricks), and I'm sure I didn't forget to add a new entry in the list thanks to the test.

Below code gets .yaml files from a custom resource directory.
ClassLoader classLoader = this.getClass().getClassLoader();
URI uri = classLoader.getResource(directoryPath).toURI();
if("jar".equalsIgnoreCase(uri.getScheme())){
Pattern pattern = Pattern.compile("^.+" +"/classes/" + directoryPath + "/.+.yaml$");
log.debug("pattern {} ", pattern.pattern());
ApplicationHome home = new ApplicationHome(SomeApplication.class);
JarFile file = new JarFile(home.getSource());
Enumeration<JarEntry> jarEntries = file.entries() ;
while(jarEntries.hasMoreElements()){
JarEntry entry = jarEntries.nextElement();
Matcher matcher = pattern.matcher(entry.getName());
if(matcher.find()){
InputStream in =
file.getInputStream(entry);
//work on the stream
}
}
}else{
//When Spring boot application executed through Non-Jar strategy like through IDE or as a War.
String path = uri.getPath();
File[] files = new File(path).listFiles();
for(File file: files){
if(file != null){
try {
InputStream is = new FileInputStream(file);
//work on stream
} catch (Exception e) {
log.error("Exception while parsing file yaml file {} : {} " , file.getAbsolutePath(), e.getMessage());
}
}else{
log.warn("File Object is null while parsing yaml file");
}
}
}

Took me 2-3 days to get this working, in order to have the same url that work for both Jar or in local, the url (or path) needs to be a relative path from the repository root.
..meaning, the location of your file or folder from your src folder.
could be "/main/resources/your-folder/" or "/client/notes/somefile.md"
Whatever it is, in order for your JAR file to find it, the url must be a relative path from the repository root.
it must be "src/main/resources/your-folder/" or "src/client/notes/somefile.md"
Now you get the drill, and luckily for Intellij Idea users, you can get the correct path with a right-click on the folder or file -> copy Path/Reference.. -> Path From Repository Root (this is it)
Last, paste it and do your thing.

Simple ... use OSGi. In OSGi you can iterate over your Bundle's entries with findEntries and findPaths.

Inside my jar file I had a folder called Upload, this folder had three other text files inside it and I needed to have an exactly the same folder and files outside of the jar file, I used the code below:
URL inputUrl = getClass().getResource("/upload/blabla1.txt");
File dest1 = new File("upload/blabla1.txt");
FileUtils.copyURLToFile(inputUrl, dest1);
URL inputUrl2 = getClass().getResource("/upload/blabla2.txt");
File dest2 = new File("upload/blabla2.txt");
FileUtils.copyURLToFile(inputUrl2, dest2);
URL inputUrl3 = getClass().getResource("/upload/blabla3.txt");
File dest3 = new File("upload/Bblabla3.txt");
FileUtils.copyURLToFile(inputUrl3, dest3);