Related
What's the advantage of using getters and setters - that only get and set - instead of simply using public fields for those variables?
If getters and setters are ever doing more than just the simple get/set, I can figure this one out very quickly, but I'm not 100% clear on how:
public String foo;
is any worse than:
private String foo;
public void setFoo(String foo) { this.foo = foo; }
public String getFoo() { return foo; }
Whereas the former takes a lot less boilerplate code.
There are actually many good reasons to consider using accessors rather than directly exposing fields of a class - beyond just the argument of encapsulation and making future changes easier.
Here are the some of the reasons I am aware of:
Encapsulation of behavior associated with getting or setting the property - this allows additional functionality (like validation) to be added more easily later.
Hiding the internal representation of the property while exposing a property using an alternative representation.
Insulating your public interface from change - allowing the public interface to remain constant while the implementation changes without affecting existing consumers.
Controlling the lifetime and memory management (disposal) semantics of the property - particularly important in non-managed memory environments (like C++ or Objective-C).
Providing a debugging interception point for when a property changes at runtime - debugging when and where a property changed to a particular value can be quite difficult without this in some languages.
Improved interoperability with libraries that are designed to operate against property getter/setters - Mocking, Serialization, and WPF come to mind.
Allowing inheritors to change the semantics of how the property behaves and is exposed by overriding the getter/setter methods.
Allowing the getter/setter to be passed around as lambda expressions rather than values.
Getters and setters can allow different access levels - for example the get may be public, but the set could be protected.
Because 2 weeks (months, years) from now when you realize that your setter needs to do more than just set the value, you'll also realize that the property has been used directly in 238 other classes :-)
A public field is not worse than a getter/setter pair that does nothing except returning the field and assigning to it. First, it's clear that (in most languages) there is no functional difference. Any difference must be in other factors, like maintainability or readability.
An oft-mentioned advantage of getter/setter pairs, isn't. There's this claim that you can change the implementation and your clients don't have to be recompiled. Supposedly, setters let you add functionality like validation later on and your clients don't even need to know about it. However, adding validation to a setter is a change to its preconditions, a violation of the previous contract, which was, quite simply, "you can put anything in here, and you can get that same thing later from the getter".
So, now that you broke the contract, changing every file in the codebase is something you should want to do, not avoid. If you avoid it you're making the assumption that all the code assumed the contract for those methods was different.
If that should not have been the contract, then the interface was allowing clients to put the object in invalid states. That's the exact opposite of encapsulation If that field could not really be set to anything from the start, why wasn't the validation there from the start?
This same argument applies to other supposed advantages of these pass-through getter/setter pairs: if you later decide to change the value being set, you're breaking the contract. If you override the default functionality in a derived class, in a way beyond a few harmless modifications (like logging or other non-observable behaviour), you're breaking the contract of the base class. That is a violation of the Liskov Substitutability Principle, which is seen as one of the tenets of OO.
If a class has these dumb getters and setters for every field, then it is a class that has no invariants whatsoever, no contract. Is that really object-oriented design? If all the class has is those getters and setters, it's just a dumb data holder, and dumb data holders should look like dumb data holders:
class Foo {
public:
int DaysLeft;
int ContestantNumber;
};
Adding pass-through getter/setter pairs to such a class adds no value. Other classes should provide meaningful operations, not just operations that fields already provide. That's how you can define and maintain useful invariants.
Client: "What can I do with an object of this class?"
Designer: "You can read and write several variables."
Client: "Oh... cool, I guess?"
There are reasons to use getters and setters, but if those reasons don't exist, making getter/setter pairs in the name of false encapsulation gods is not a good thing. Valid reasons to make getters or setters include the things often mentioned as the potential changes you can make later, like validation or different internal representations. Or maybe the value should be readable by clients but not writable (for example, reading the size of a dictionary), so a simple getter is a nice choice. But those reasons should be there when you make the choice, and not just as a potential thing you may want later. This is an instance of YAGNI (You Ain't Gonna Need It).
Lots of people talk about the advantages of getters and setters but I want to play devil's advocate. Right now I'm debugging a very large program where the programmers decided to make everything getters and setters. That might seem nice, but its a reverse-engineering nightmare.
Say you're looking through hundreds of lines of code and you come across this:
person.name = "Joe";
It's a beautifully simply piece of code until you realize its a setter. Now, you follow that setter and find that it also sets person.firstName, person.lastName, person.isHuman, person.hasReallyCommonFirstName, and calls person.update(), which sends a query out to the database, etc. Oh, that's where your memory leak was occurring.
Understanding a local piece of code at first glance is an important property of good readability that getters and setters tend to break. That is why I try to avoid them when I can, and minimize what they do when I use them.
In a pure object-oriented world getters and setters is a terrible anti-pattern. Read this article: Getters/Setters. Evil. Period. In a nutshell, they encourage programmers to think about objects as of data structures, and this type of thinking is pure procedural (like in COBOL or C). In an object-oriented language there are no data structures, but only objects that expose behavior (not attributes/properties!)
You may find more about them in Section 3.5 of Elegant Objects (my book about object-oriented programming).
There are many reasons. My favorite one is when you need to change the behavior or regulate what you can set on a variable. For instance, lets say you had a setSpeed(int speed) method. But you want that you can only set a maximum speed of 100. You would do something like:
public void setSpeed(int speed) {
if ( speed > 100 ) {
this.speed = 100;
} else {
this.speed = speed;
}
}
Now what if EVERYWHERE in your code you were using the public field and then you realized you need the above requirement? Have fun hunting down every usage of the public field instead of just modifying your setter.
My 2 cents :)
One advantage of accessors and mutators is that you can perform validation.
For example, if foo was public, I could easily set it to null and then someone else could try to call a method on the object. But it's not there anymore! With a setFoo method, I could ensure that foo was never set to null.
Accessors and mutators also allow for encapsulation - if you aren't supposed to see the value once its set (perhaps it's set in the constructor and then used by methods, but never supposed to be changed), it will never been seen by anyone. But if you can allow other classes to see or change it, you can provide the proper accessor and/or mutator.
Thanks, that really clarified my thinking. Now here is (almost) 10 (almost) good reasons NOT to use getters and setters:
When you realize you need to do more than just set and get the value, you can just make the field private, which will instantly tell you where you've directly accessed it.
Any validation you perform in there can only be context free, which validation rarely is in practice.
You can change the value being set - this is an absolute nightmare when the caller passes you a value that they [shock horror] want you to store AS IS.
You can hide the internal representation - fantastic, so you're making sure that all these operations are symmetrical right?
You've insulated your public interface from changes under the sheets - if you were designing an interface and weren't sure whether direct access to something was OK, then you should have kept designing.
Some libraries expect this, but not many - reflection, serialization, mock objects all work just fine with public fields.
Inheriting this class, you can override default functionality - in other words you can REALLY confuse callers by not only hiding the implementation but making it inconsistent.
The last three I'm just leaving (N/A or D/C)...
Depends on your language. You've tagged this "object-oriented" rather than "Java", so I'd like to point out that ChssPly76's answer is language-dependent. In Python, for instance, there is no reason to use getters and setters. If you need to change the behavior, you can use a property, which wraps a getter and setter around basic attribute access. Something like this:
class Simple(object):
def _get_value(self):
return self._value -1
def _set_value(self, new_value):
self._value = new_value + 1
def _del_value(self):
self.old_values.append(self._value)
del self._value
value = property(_get_value, _set_value, _del_value)
Well i just want to add that even if sometimes they are necessary for the encapsulation and security of your variables/objects, if we want to code a real Object Oriented Program, then we need to STOP OVERUSING THE ACCESSORS, cause sometimes we depend a lot on them when is not really necessary and that makes almost the same as if we put the variables public.
EDIT: I answered this question because there are a bunch of people learning programming asking this, and most of the answers are very technically competent, but they're not as easy to understand if you're a newbie. We were all newbies, so I thought I'd try my hand at a more newbie friendly answer.
The two main ones are polymorphism, and validation. Even if it's just a stupid data structure.
Let's say we have this simple class:
public class Bottle {
public int amountOfWaterMl;
public int capacityMl;
}
A very simple class that holds how much liquid is in it, and what its capacity is (in milliliters).
What happens when I do:
Bottle bot = new Bottle();
bot.amountOfWaterMl = 1500;
bot.capacityMl = 1000;
Well, you wouldn't expect that to work, right?
You want there to be some kind of sanity check. And worse, what if I never specified the maximum capacity? Oh dear, we have a problem.
But there's another problem too. What if bottles were just one type of container? What if we had several containers, all with capacities and amounts of liquid filled? If we could just make an interface, we could let the rest of our program accept that interface, and bottles, jerrycans and all sorts of stuff would just work interchangably. Wouldn't that be better? Since interfaces demand methods, this is also a good thing.
We'd end up with something like:
public interface LiquidContainer {
public int getAmountMl();
public void setAmountMl(int amountMl);
public int getCapacityMl();
}
Great! And now we just change Bottle to this:
public class Bottle implements LiquidContainer {
private int capacityMl;
private int amountFilledMl;
public Bottle(int capacityMl, int amountFilledMl) {
this.capacityMl = capacityMl;
this.amountFilledMl = amountFilledMl;
checkNotOverFlow();
}
public int getAmountMl() {
return amountFilledMl;
}
public void setAmountMl(int amountMl) {
this.amountFilled = amountMl;
checkNotOverFlow();
}
public int getCapacityMl() {
return capacityMl;
}
private void checkNotOverFlow() {
if(amountOfWaterMl > capacityMl) {
throw new BottleOverflowException();
}
}
I'll leave the definition of the BottleOverflowException as an exercise to the reader.
Now notice how much more robust this is. We can deal with any type of container in our code now by accepting LiquidContainer instead of Bottle. And how these bottles deal with this sort of stuff can all differ. You can have bottles that write their state to disk when it changes, or bottles that save on SQL databases or GNU knows what else.
And all these can have different ways to handle various whoopsies. The Bottle just checks and if it's overflowing it throws a RuntimeException. But that might be the wrong thing to do.
(There is a useful discussion to be had about error handling, but I'm keeping it very simple here on purpose. People in comments will likely point out the flaws of this simplistic approach. ;) )
And yes, it seems like we go from a very simple idea to getting much better answers quickly.
Please note also that you can't change the capacity of a bottle. It's now set in stone. You could do this with an int by declaring it final. But if this was a list, you could empty it, add new things to it, and so on. You can't limit the access to touching the innards.
There's also the third thing that not everyone has addressed: getters and setters use method calls. That means that they look like normal methods everywhere else does. Instead of having weird specific syntax for DTOs and stuff, you have the same thing everywhere.
I know it's a bit late, but I think there are some people who are interested in performance.
I've done a little performance test. I wrote a class "NumberHolder" which, well, holds an Integer. You can either read that Integer by using the getter method
anInstance.getNumber() or by directly accessing the number by using anInstance.number. My programm reads the number 1,000,000,000 times, via both ways. That process is repeated five times and the time is printed. I've got the following result:
Time 1: 953ms, Time 2: 741ms
Time 1: 655ms, Time 2: 743ms
Time 1: 656ms, Time 2: 634ms
Time 1: 637ms, Time 2: 629ms
Time 1: 633ms, Time 2: 625ms
(Time 1 is the direct way, Time 2 is the getter)
You see, the getter is (almost) always a bit faster. Then I tried with different numbers of cycles. Instead of 1 million, I used 10 million and 0.1 million.
The results:
10 million cycles:
Time 1: 6382ms, Time 2: 6351ms
Time 1: 6363ms, Time 2: 6351ms
Time 1: 6350ms, Time 2: 6363ms
Time 1: 6353ms, Time 2: 6357ms
Time 1: 6348ms, Time 2: 6354ms
With 10 million cycles, the times are almost the same.
Here are 100 thousand (0.1 million) cycles:
Time 1: 77ms, Time 2: 73ms
Time 1: 94ms, Time 2: 65ms
Time 1: 67ms, Time 2: 63ms
Time 1: 65ms, Time 2: 65ms
Time 1: 66ms, Time 2: 63ms
Also with different amounts of cycles, the getter is a little bit faster than the regular way. I hope this helped you.
Don't use getters setters unless needed for your current delivery I.e. Don't think too much about what would happen in the future, if any thing to be changed its a change request in most of the production applications, systems.
Think simple, easy, add complexity when needed.
I would not take advantage of ignorance of business owners of deep technical know how just because I think it's correct or I like the approach.
I have massive system written without getters setters only with access modifiers and some methods to validate n perform biz logic. If you absolutely needed the. Use anything.
We use getters and setters:
for reusability
to perform validation in later stages of programming
Getter and setter methods are public interfaces to access private class members.
Encapsulation mantra
The encapsulation mantra is to make fields private and methods public.
Getter Methods: We can get access to private variables.
Setter Methods: We can modify private fields.
Even though the getter and setter methods do not add new functionality, we can change our mind come back later to make that method
better;
safer; and
faster.
Anywhere a value can be used, a method that returns that value can be added. Instead of:
int x = 1000 - 500
use
int x = 1000 - class_name.getValue();
In layman's terms
Suppose we need to store the details of this Person. This Person has the fields name, age and sex. Doing this involves creating methods for name, age and sex. Now if we need create another person, it becomes necessary to create the methods for name, age, sex all over again.
Instead of doing this, we can create a bean class(Person) with getter and setter methods. So tomorrow we can just create objects of this Bean class(Person class) whenever we need to add a new person (see the figure). Thus we are reusing the fields and methods of bean class, which is much better.
I spent quite a while thinking this over for the Java case, and I believe the real reasons are:
Code to the interface, not the implementation
Interfaces only specify methods, not fields
In other words, the only way you can specify a field in an interface is by providing a method for writing a new value and a method for reading the current value.
Those methods are the infamous getter and setter....
It can be useful for lazy-loading. Say the object in question is stored in a database, and you don't want to go get it unless you need it. If the object is retrieved by a getter, then the internal object can be null until somebody asks for it, then you can go get it on the first call to the getter.
I had a base page class in a project that was handed to me that was loading some data from a couple different web service calls, but the data in those web service calls wasn't always used in all child pages. Web services, for all of the benefits, pioneer new definitions of "slow", so you don't want to make a web service call if you don't have to.
I moved from public fields to getters, and now the getters check the cache, and if it's not there call the web service. So with a little wrapping, a lot of web service calls were prevented.
So the getter saves me from trying to figure out, on each child page, what I will need. If I need it, I call the getter, and it goes to find it for me if I don't already have it.
protected YourType _yourName = null;
public YourType YourName{
get
{
if (_yourName == null)
{
_yourName = new YourType();
return _yourName;
}
}
}
One aspect I missed in the answers so far, the access specification:
for members you have only one access specification for both setting and getting
for setters and getters you can fine tune it and define it separately
In languages which don't support "properties" (C++, Java) or require recompilation of clients when changing fields to properties (C#), using get/set methods is easier to modify. For example, adding validation logic to a setFoo method will not require changing the public interface of a class.
In languages which support "real" properties (Python, Ruby, maybe Smalltalk?) there is no point to get/set methods.
One of the basic principals of OO design: Encapsulation!
It gives you many benefits, one of which being that you can change the implementation of the getter/setter behind the scenes but any consumer of that value will continue to work as long as the data type remains the same.
You should use getters and setters when:
You're dealing with something that is conceptually an attribute, but:
Your language doesn't have properties (or some similar mechanism, like Tcl's variable traces), or
Your language's property support isn't sufficient for this use case, or
Your language's (or sometimes your framework's) idiomatic conventions encourage getters or setters for this use case.
So this is very rarely a general OO question; it's a language-specific question, with different answers for different languages (and different use cases).
From an OO theory point of view, getters and setters are useless. The interface of your class is what it does, not what its state is. (If not, you've written the wrong class.) In very simple cases, where what a class does is just, e.g., represent a point in rectangular coordinates,* the attributes are part of the interface; getters and setters just cloud that. But in anything but very simple cases, neither the attributes nor getters and setters are part of the interface.
Put another way: If you believe that consumers of your class shouldn't even know that you have a spam attribute, much less be able to change it willy-nilly, then giving them a set_spam method is the last thing you want to do.
* Even for that simple class, you may not necessarily want to allow setting the x and y values. If this is really a class, shouldn't it have methods like translate, rotate, etc.? If it's only a class because your language doesn't have records/structs/named tuples, then this isn't really a question of OO…
But nobody is ever doing general OO design. They're doing design, and implementation, in a specific language. And in some languages, getters and setters are far from useless.
If your language doesn't have properties, then the only way to represent something that's conceptually an attribute, but is actually computed, or validated, etc., is through getters and setters.
Even if your language does have properties, there may be cases where they're insufficient or inappropriate. For example, if you want to allow subclasses to control the semantics of an attribute, in languages without dynamic access, a subclass can't substitute a computed property for an attribute.
As for the "what if I want to change my implementation later?" question (which is repeated multiple times in different wording in both the OP's question and the accepted answer): If it really is a pure implementation change, and you started with an attribute, you can change it to a property without affecting the interface. Unless, of course, your language doesn't support that. So this is really just the same case again.
Also, it's important to follow the idioms of the language (or framework) you're using. If you write beautiful Ruby-style code in C#, any experienced C# developer other than you is going to have trouble reading it, and that's bad. Some languages have stronger cultures around their conventions than others.—and it may not be a coincidence that Java and Python, which are on opposite ends of the spectrum for how idiomatic getters are, happen to have two of the strongest cultures.
Beyond human readers, there will be libraries and tools that expect you to follow the conventions, and make your life harder if you don't. Hooking Interface Builder widgets to anything but ObjC properties, or using certain Java mocking libraries without getters, is just making your life more difficult. If the tools are important to you, don't fight them.
From a object orientation design standpoint both alternatives can be damaging to the maintenance of the code by weakening the encapsulation of the classes. For a discussion you can look into this excellent article: http://typicalprogrammer.com/?p=23
Code evolves. private is great for when you need data member protection. Eventually all classes should be sort of "miniprograms" that have a well-defined interface that you can't just screw with the internals of.
That said, software development isn't about setting down that final version of the class as if you're pressing some cast iron statue on the first try. While you're working with it, code is more like clay. It evolves as you develop it and learn more about the problem domain you are solving. During development classes may interact with each other than they should (dependency you plan to factor out), merge together, or split apart. So I think the debate boils down to people not wanting to religiously write
int getVar() const { return var ; }
So you have:
doSomething( obj->getVar() ) ;
Instead of
doSomething( obj->var ) ;
Not only is getVar() visually noisy, it gives this illusion that gettingVar() is somehow a more complex process than it really is. How you (as the class writer) regard the sanctity of var is particularly confusing to a user of your class if it has a passthru setter -- then it looks like you're putting up these gates to "protect" something you insist is valuable, (the sanctity of var) but yet even you concede var's protection isn't worth much by the ability for anyone to just come in and set var to whatever value they want, without you even peeking at what they are doing.
So I program as follows (assuming an "agile" type approach -- ie when I write code not knowing exactly what it will be doing/don't have time or experience to plan an elaborate waterfall style interface set):
1) Start with all public members for basic objects with data and behavior. This is why in all my C++ "example" code you'll notice me using struct instead of class everywhere.
2) When an object's internal behavior for a data member becomes complex enough, (for example, it likes to keep an internal std::list in some kind of order), accessor type functions are written. Because I'm programming by myself, I don't always set the member private right away, but somewhere down the evolution of the class the member will be "promoted" to either protected or private.
3) Classes that are fully fleshed out and have strict rules about their internals (ie they know exactly what they are doing, and you are not to "fuck" (technical term) with its internals) are given the class designation, default private members, and only a select few members are allowed to be public.
I find this approach allows me to avoid sitting there and religiously writing getter/setters when a lot of data members get migrated out, shifted around, etc. during the early stages of a class's evolution.
There is a good reason to consider using accessors is there is no property inheritance. See next example:
public class TestPropertyOverride {
public static class A {
public int i = 0;
public void add() {
i++;
}
public int getI() {
return i;
}
}
public static class B extends A {
public int i = 2;
#Override
public void add() {
i = i + 2;
}
#Override
public int getI() {
return i;
}
}
public static void main(String[] args) {
A a = new B();
System.out.println(a.i);
a.add();
System.out.println(a.i);
System.out.println(a.getI());
}
}
Output:
0
0
4
Getters and setters are used to implement two of the fundamental aspects of Object Oriented Programming which are:
Abstraction
Encapsulation
Suppose we have an Employee class:
package com.highmark.productConfig.types;
public class Employee {
private String firstName;
private String middleName;
private String lastName;
public String getFirstName() {
return firstName;
}
public void setFirstName(String firstName) {
this.firstName = firstName;
}
public String getMiddleName() {
return middleName;
}
public void setMiddleName(String middleName) {
this.middleName = middleName;
}
public String getLastName() {
return lastName;
}
public void setLastName(String lastName) {
this.lastName = lastName;
}
public String getFullName(){
return this.getFirstName() + this.getMiddleName() + this.getLastName();
}
}
Here the implementation details of Full Name is hidden from the user and is not accessible directly to the user, unlike a public attribute.
There is a difference between DataStructure and Object.
Datastructure should expose its innards and not behavior.
An Object should not expose its innards but it should expose its behavior, which is also known as the Law of Demeter
Mostly DTOs are considered more of a datastructure and not Object. They should only expose their data and not behavior. Having Setter/Getter in DataStructure will expose behavior instead of data inside it. This further increases the chance of violation of Law of Demeter.
Uncle Bob in his book Clean code explained the Law of Demeter.
There is a well-known heuristic called the Law of Demeter that says a
module should not know about the innards of the objects it
manipulates. As we saw in the last section, objects hide their data
and expose operations. This means that an object should not expose its
internal structure through accessors because to do so is to expose,
rather than to hide, its internal structure.
More precisely, the Law of Demeter says that a method f of a class C
should only call the methods of these:
C
An object created by f
An object passed as an argument to f
An object held in an instance variable of C
The method should not invoke methods on objects that are returned by any of the allowed functions.
In other words, talk to friends, not to strangers.
So according this, example of LoD violation is:
final String outputDir = ctxt.getOptions().getScratchDir().getAbsolutePath();
Here, the function should call the method of its immediate friend which is ctxt here, It should not call the method of its immediate friend's friend. but this rule doesn't apply to data structure. so here if ctxt, option, scratchDir are datastructure then why to wrap their internal data with some behavior and doing a violation of LoD.
Instead, we can do something like this.
final String outputDir = ctxt.options.scratchDir.absolutePath;
This fulfills our needs and doesn't even violate LoD.
Inspired by Clean Code by Robert C. Martin(Uncle Bob)
If you don't require any validations and not even need to maintain state i.e. one property depends on another so we need to maintain the state when one is change. You can keep it simple by making field public and not using getter and setters.
I think OOPs complicates things as the program grows it becomes nightmare for developer to scale.
A simple example; we generate c++ headers from xml. The header contains simple field which does not require any validations. But still as in OOPS accessor are fashion we generates them as following.
const Filed& getfield() const
Field& getField()
void setfield(const Field& field){...}
which is very verbose and is not required. a simple
struct
{
Field field;
};
is enough and readable.
Functional programming don't have the concept of data hiding they even don't require it as they do not mutate the data.
Additionally, this is to "future-proof" your class. In particular, changing from a field to a property is an ABI break, so if you do later decide that you need more logic than just "set/get the field", then you need to break ABI, which of course creates problems for anything else already compiled against your class.
One other use (in languages that support properties) is that setters and getters can imply that an operation is non-trivial. Typically, you want to avoid doing anything that's computationally expensive in a property.
One relatively modern advantage of getters/setters is that is makes it easier to browse code in tagged (indexed) code editors. E.g. If you want to see who sets a member, you can open the call hierarchy of the setter.
On the other hand, if the member is public, the tools don't make it possible to filter read/write access to the member. So you have to trudge though all uses of the member.
Getters and setters coming from data hiding. Data Hiding means We
are hiding data from outsiders or outside person/thing cannot access
our data.This is a useful feature in OOP.
As a example:
If you create a public variable, you can access that variable and change value in anywhere(any class). But if you create as private that variable cannot see/access in any class except declared class.
public and private are access modifiers.
So how can we access that variable outside:
This is the place getters and setters coming from. You can declare variable as private then you can implement getter and setter for that variable.
Example(Java):
private String name;
public String getName(){
return this.name;
}
public void setName(String name){
this.name= name;
}
Advantage:
When anyone want to access or change/set value to balance variable, he/she must have permision.
//assume we have person1 object
//to give permission to check balance
person1.getName()
//to give permission to set balance
person1.setName()
You can set value in constructor also but when later on when you want
to update/change value, you have to implement setter method.
What's the advantage of using getters and setters - that only get and set - instead of simply using public fields for those variables?
If getters and setters are ever doing more than just the simple get/set, I can figure this one out very quickly, but I'm not 100% clear on how:
public String foo;
is any worse than:
private String foo;
public void setFoo(String foo) { this.foo = foo; }
public String getFoo() { return foo; }
Whereas the former takes a lot less boilerplate code.
There are actually many good reasons to consider using accessors rather than directly exposing fields of a class - beyond just the argument of encapsulation and making future changes easier.
Here are the some of the reasons I am aware of:
Encapsulation of behavior associated with getting or setting the property - this allows additional functionality (like validation) to be added more easily later.
Hiding the internal representation of the property while exposing a property using an alternative representation.
Insulating your public interface from change - allowing the public interface to remain constant while the implementation changes without affecting existing consumers.
Controlling the lifetime and memory management (disposal) semantics of the property - particularly important in non-managed memory environments (like C++ or Objective-C).
Providing a debugging interception point for when a property changes at runtime - debugging when and where a property changed to a particular value can be quite difficult without this in some languages.
Improved interoperability with libraries that are designed to operate against property getter/setters - Mocking, Serialization, and WPF come to mind.
Allowing inheritors to change the semantics of how the property behaves and is exposed by overriding the getter/setter methods.
Allowing the getter/setter to be passed around as lambda expressions rather than values.
Getters and setters can allow different access levels - for example the get may be public, but the set could be protected.
Because 2 weeks (months, years) from now when you realize that your setter needs to do more than just set the value, you'll also realize that the property has been used directly in 238 other classes :-)
A public field is not worse than a getter/setter pair that does nothing except returning the field and assigning to it. First, it's clear that (in most languages) there is no functional difference. Any difference must be in other factors, like maintainability or readability.
An oft-mentioned advantage of getter/setter pairs, isn't. There's this claim that you can change the implementation and your clients don't have to be recompiled. Supposedly, setters let you add functionality like validation later on and your clients don't even need to know about it. However, adding validation to a setter is a change to its preconditions, a violation of the previous contract, which was, quite simply, "you can put anything in here, and you can get that same thing later from the getter".
So, now that you broke the contract, changing every file in the codebase is something you should want to do, not avoid. If you avoid it you're making the assumption that all the code assumed the contract for those methods was different.
If that should not have been the contract, then the interface was allowing clients to put the object in invalid states. That's the exact opposite of encapsulation If that field could not really be set to anything from the start, why wasn't the validation there from the start?
This same argument applies to other supposed advantages of these pass-through getter/setter pairs: if you later decide to change the value being set, you're breaking the contract. If you override the default functionality in a derived class, in a way beyond a few harmless modifications (like logging or other non-observable behaviour), you're breaking the contract of the base class. That is a violation of the Liskov Substitutability Principle, which is seen as one of the tenets of OO.
If a class has these dumb getters and setters for every field, then it is a class that has no invariants whatsoever, no contract. Is that really object-oriented design? If all the class has is those getters and setters, it's just a dumb data holder, and dumb data holders should look like dumb data holders:
class Foo {
public:
int DaysLeft;
int ContestantNumber;
};
Adding pass-through getter/setter pairs to such a class adds no value. Other classes should provide meaningful operations, not just operations that fields already provide. That's how you can define and maintain useful invariants.
Client: "What can I do with an object of this class?"
Designer: "You can read and write several variables."
Client: "Oh... cool, I guess?"
There are reasons to use getters and setters, but if those reasons don't exist, making getter/setter pairs in the name of false encapsulation gods is not a good thing. Valid reasons to make getters or setters include the things often mentioned as the potential changes you can make later, like validation or different internal representations. Or maybe the value should be readable by clients but not writable (for example, reading the size of a dictionary), so a simple getter is a nice choice. But those reasons should be there when you make the choice, and not just as a potential thing you may want later. This is an instance of YAGNI (You Ain't Gonna Need It).
Lots of people talk about the advantages of getters and setters but I want to play devil's advocate. Right now I'm debugging a very large program where the programmers decided to make everything getters and setters. That might seem nice, but its a reverse-engineering nightmare.
Say you're looking through hundreds of lines of code and you come across this:
person.name = "Joe";
It's a beautifully simply piece of code until you realize its a setter. Now, you follow that setter and find that it also sets person.firstName, person.lastName, person.isHuman, person.hasReallyCommonFirstName, and calls person.update(), which sends a query out to the database, etc. Oh, that's where your memory leak was occurring.
Understanding a local piece of code at first glance is an important property of good readability that getters and setters tend to break. That is why I try to avoid them when I can, and minimize what they do when I use them.
In a pure object-oriented world getters and setters is a terrible anti-pattern. Read this article: Getters/Setters. Evil. Period. In a nutshell, they encourage programmers to think about objects as of data structures, and this type of thinking is pure procedural (like in COBOL or C). In an object-oriented language there are no data structures, but only objects that expose behavior (not attributes/properties!)
You may find more about them in Section 3.5 of Elegant Objects (my book about object-oriented programming).
There are many reasons. My favorite one is when you need to change the behavior or regulate what you can set on a variable. For instance, lets say you had a setSpeed(int speed) method. But you want that you can only set a maximum speed of 100. You would do something like:
public void setSpeed(int speed) {
if ( speed > 100 ) {
this.speed = 100;
} else {
this.speed = speed;
}
}
Now what if EVERYWHERE in your code you were using the public field and then you realized you need the above requirement? Have fun hunting down every usage of the public field instead of just modifying your setter.
My 2 cents :)
One advantage of accessors and mutators is that you can perform validation.
For example, if foo was public, I could easily set it to null and then someone else could try to call a method on the object. But it's not there anymore! With a setFoo method, I could ensure that foo was never set to null.
Accessors and mutators also allow for encapsulation - if you aren't supposed to see the value once its set (perhaps it's set in the constructor and then used by methods, but never supposed to be changed), it will never been seen by anyone. But if you can allow other classes to see or change it, you can provide the proper accessor and/or mutator.
Thanks, that really clarified my thinking. Now here is (almost) 10 (almost) good reasons NOT to use getters and setters:
When you realize you need to do more than just set and get the value, you can just make the field private, which will instantly tell you where you've directly accessed it.
Any validation you perform in there can only be context free, which validation rarely is in practice.
You can change the value being set - this is an absolute nightmare when the caller passes you a value that they [shock horror] want you to store AS IS.
You can hide the internal representation - fantastic, so you're making sure that all these operations are symmetrical right?
You've insulated your public interface from changes under the sheets - if you were designing an interface and weren't sure whether direct access to something was OK, then you should have kept designing.
Some libraries expect this, but not many - reflection, serialization, mock objects all work just fine with public fields.
Inheriting this class, you can override default functionality - in other words you can REALLY confuse callers by not only hiding the implementation but making it inconsistent.
The last three I'm just leaving (N/A or D/C)...
Depends on your language. You've tagged this "object-oriented" rather than "Java", so I'd like to point out that ChssPly76's answer is language-dependent. In Python, for instance, there is no reason to use getters and setters. If you need to change the behavior, you can use a property, which wraps a getter and setter around basic attribute access. Something like this:
class Simple(object):
def _get_value(self):
return self._value -1
def _set_value(self, new_value):
self._value = new_value + 1
def _del_value(self):
self.old_values.append(self._value)
del self._value
value = property(_get_value, _set_value, _del_value)
Well i just want to add that even if sometimes they are necessary for the encapsulation and security of your variables/objects, if we want to code a real Object Oriented Program, then we need to STOP OVERUSING THE ACCESSORS, cause sometimes we depend a lot on them when is not really necessary and that makes almost the same as if we put the variables public.
EDIT: I answered this question because there are a bunch of people learning programming asking this, and most of the answers are very technically competent, but they're not as easy to understand if you're a newbie. We were all newbies, so I thought I'd try my hand at a more newbie friendly answer.
The two main ones are polymorphism, and validation. Even if it's just a stupid data structure.
Let's say we have this simple class:
public class Bottle {
public int amountOfWaterMl;
public int capacityMl;
}
A very simple class that holds how much liquid is in it, and what its capacity is (in milliliters).
What happens when I do:
Bottle bot = new Bottle();
bot.amountOfWaterMl = 1500;
bot.capacityMl = 1000;
Well, you wouldn't expect that to work, right?
You want there to be some kind of sanity check. And worse, what if I never specified the maximum capacity? Oh dear, we have a problem.
But there's another problem too. What if bottles were just one type of container? What if we had several containers, all with capacities and amounts of liquid filled? If we could just make an interface, we could let the rest of our program accept that interface, and bottles, jerrycans and all sorts of stuff would just work interchangably. Wouldn't that be better? Since interfaces demand methods, this is also a good thing.
We'd end up with something like:
public interface LiquidContainer {
public int getAmountMl();
public void setAmountMl(int amountMl);
public int getCapacityMl();
}
Great! And now we just change Bottle to this:
public class Bottle implements LiquidContainer {
private int capacityMl;
private int amountFilledMl;
public Bottle(int capacityMl, int amountFilledMl) {
this.capacityMl = capacityMl;
this.amountFilledMl = amountFilledMl;
checkNotOverFlow();
}
public int getAmountMl() {
return amountFilledMl;
}
public void setAmountMl(int amountMl) {
this.amountFilled = amountMl;
checkNotOverFlow();
}
public int getCapacityMl() {
return capacityMl;
}
private void checkNotOverFlow() {
if(amountOfWaterMl > capacityMl) {
throw new BottleOverflowException();
}
}
I'll leave the definition of the BottleOverflowException as an exercise to the reader.
Now notice how much more robust this is. We can deal with any type of container in our code now by accepting LiquidContainer instead of Bottle. And how these bottles deal with this sort of stuff can all differ. You can have bottles that write their state to disk when it changes, or bottles that save on SQL databases or GNU knows what else.
And all these can have different ways to handle various whoopsies. The Bottle just checks and if it's overflowing it throws a RuntimeException. But that might be the wrong thing to do.
(There is a useful discussion to be had about error handling, but I'm keeping it very simple here on purpose. People in comments will likely point out the flaws of this simplistic approach. ;) )
And yes, it seems like we go from a very simple idea to getting much better answers quickly.
Please note also that you can't change the capacity of a bottle. It's now set in stone. You could do this with an int by declaring it final. But if this was a list, you could empty it, add new things to it, and so on. You can't limit the access to touching the innards.
There's also the third thing that not everyone has addressed: getters and setters use method calls. That means that they look like normal methods everywhere else does. Instead of having weird specific syntax for DTOs and stuff, you have the same thing everywhere.
I know it's a bit late, but I think there are some people who are interested in performance.
I've done a little performance test. I wrote a class "NumberHolder" which, well, holds an Integer. You can either read that Integer by using the getter method
anInstance.getNumber() or by directly accessing the number by using anInstance.number. My programm reads the number 1,000,000,000 times, via both ways. That process is repeated five times and the time is printed. I've got the following result:
Time 1: 953ms, Time 2: 741ms
Time 1: 655ms, Time 2: 743ms
Time 1: 656ms, Time 2: 634ms
Time 1: 637ms, Time 2: 629ms
Time 1: 633ms, Time 2: 625ms
(Time 1 is the direct way, Time 2 is the getter)
You see, the getter is (almost) always a bit faster. Then I tried with different numbers of cycles. Instead of 1 million, I used 10 million and 0.1 million.
The results:
10 million cycles:
Time 1: 6382ms, Time 2: 6351ms
Time 1: 6363ms, Time 2: 6351ms
Time 1: 6350ms, Time 2: 6363ms
Time 1: 6353ms, Time 2: 6357ms
Time 1: 6348ms, Time 2: 6354ms
With 10 million cycles, the times are almost the same.
Here are 100 thousand (0.1 million) cycles:
Time 1: 77ms, Time 2: 73ms
Time 1: 94ms, Time 2: 65ms
Time 1: 67ms, Time 2: 63ms
Time 1: 65ms, Time 2: 65ms
Time 1: 66ms, Time 2: 63ms
Also with different amounts of cycles, the getter is a little bit faster than the regular way. I hope this helped you.
Don't use getters setters unless needed for your current delivery I.e. Don't think too much about what would happen in the future, if any thing to be changed its a change request in most of the production applications, systems.
Think simple, easy, add complexity when needed.
I would not take advantage of ignorance of business owners of deep technical know how just because I think it's correct or I like the approach.
I have massive system written without getters setters only with access modifiers and some methods to validate n perform biz logic. If you absolutely needed the. Use anything.
We use getters and setters:
for reusability
to perform validation in later stages of programming
Getter and setter methods are public interfaces to access private class members.
Encapsulation mantra
The encapsulation mantra is to make fields private and methods public.
Getter Methods: We can get access to private variables.
Setter Methods: We can modify private fields.
Even though the getter and setter methods do not add new functionality, we can change our mind come back later to make that method
better;
safer; and
faster.
Anywhere a value can be used, a method that returns that value can be added. Instead of:
int x = 1000 - 500
use
int x = 1000 - class_name.getValue();
In layman's terms
Suppose we need to store the details of this Person. This Person has the fields name, age and sex. Doing this involves creating methods for name, age and sex. Now if we need create another person, it becomes necessary to create the methods for name, age, sex all over again.
Instead of doing this, we can create a bean class(Person) with getter and setter methods. So tomorrow we can just create objects of this Bean class(Person class) whenever we need to add a new person (see the figure). Thus we are reusing the fields and methods of bean class, which is much better.
I spent quite a while thinking this over for the Java case, and I believe the real reasons are:
Code to the interface, not the implementation
Interfaces only specify methods, not fields
In other words, the only way you can specify a field in an interface is by providing a method for writing a new value and a method for reading the current value.
Those methods are the infamous getter and setter....
It can be useful for lazy-loading. Say the object in question is stored in a database, and you don't want to go get it unless you need it. If the object is retrieved by a getter, then the internal object can be null until somebody asks for it, then you can go get it on the first call to the getter.
I had a base page class in a project that was handed to me that was loading some data from a couple different web service calls, but the data in those web service calls wasn't always used in all child pages. Web services, for all of the benefits, pioneer new definitions of "slow", so you don't want to make a web service call if you don't have to.
I moved from public fields to getters, and now the getters check the cache, and if it's not there call the web service. So with a little wrapping, a lot of web service calls were prevented.
So the getter saves me from trying to figure out, on each child page, what I will need. If I need it, I call the getter, and it goes to find it for me if I don't already have it.
protected YourType _yourName = null;
public YourType YourName{
get
{
if (_yourName == null)
{
_yourName = new YourType();
return _yourName;
}
}
}
One aspect I missed in the answers so far, the access specification:
for members you have only one access specification for both setting and getting
for setters and getters you can fine tune it and define it separately
In languages which don't support "properties" (C++, Java) or require recompilation of clients when changing fields to properties (C#), using get/set methods is easier to modify. For example, adding validation logic to a setFoo method will not require changing the public interface of a class.
In languages which support "real" properties (Python, Ruby, maybe Smalltalk?) there is no point to get/set methods.
One of the basic principals of OO design: Encapsulation!
It gives you many benefits, one of which being that you can change the implementation of the getter/setter behind the scenes but any consumer of that value will continue to work as long as the data type remains the same.
You should use getters and setters when:
You're dealing with something that is conceptually an attribute, but:
Your language doesn't have properties (or some similar mechanism, like Tcl's variable traces), or
Your language's property support isn't sufficient for this use case, or
Your language's (or sometimes your framework's) idiomatic conventions encourage getters or setters for this use case.
So this is very rarely a general OO question; it's a language-specific question, with different answers for different languages (and different use cases).
From an OO theory point of view, getters and setters are useless. The interface of your class is what it does, not what its state is. (If not, you've written the wrong class.) In very simple cases, where what a class does is just, e.g., represent a point in rectangular coordinates,* the attributes are part of the interface; getters and setters just cloud that. But in anything but very simple cases, neither the attributes nor getters and setters are part of the interface.
Put another way: If you believe that consumers of your class shouldn't even know that you have a spam attribute, much less be able to change it willy-nilly, then giving them a set_spam method is the last thing you want to do.
* Even for that simple class, you may not necessarily want to allow setting the x and y values. If this is really a class, shouldn't it have methods like translate, rotate, etc.? If it's only a class because your language doesn't have records/structs/named tuples, then this isn't really a question of OO…
But nobody is ever doing general OO design. They're doing design, and implementation, in a specific language. And in some languages, getters and setters are far from useless.
If your language doesn't have properties, then the only way to represent something that's conceptually an attribute, but is actually computed, or validated, etc., is through getters and setters.
Even if your language does have properties, there may be cases where they're insufficient or inappropriate. For example, if you want to allow subclasses to control the semantics of an attribute, in languages without dynamic access, a subclass can't substitute a computed property for an attribute.
As for the "what if I want to change my implementation later?" question (which is repeated multiple times in different wording in both the OP's question and the accepted answer): If it really is a pure implementation change, and you started with an attribute, you can change it to a property without affecting the interface. Unless, of course, your language doesn't support that. So this is really just the same case again.
Also, it's important to follow the idioms of the language (or framework) you're using. If you write beautiful Ruby-style code in C#, any experienced C# developer other than you is going to have trouble reading it, and that's bad. Some languages have stronger cultures around their conventions than others.—and it may not be a coincidence that Java and Python, which are on opposite ends of the spectrum for how idiomatic getters are, happen to have two of the strongest cultures.
Beyond human readers, there will be libraries and tools that expect you to follow the conventions, and make your life harder if you don't. Hooking Interface Builder widgets to anything but ObjC properties, or using certain Java mocking libraries without getters, is just making your life more difficult. If the tools are important to you, don't fight them.
From a object orientation design standpoint both alternatives can be damaging to the maintenance of the code by weakening the encapsulation of the classes. For a discussion you can look into this excellent article: http://typicalprogrammer.com/?p=23
Code evolves. private is great for when you need data member protection. Eventually all classes should be sort of "miniprograms" that have a well-defined interface that you can't just screw with the internals of.
That said, software development isn't about setting down that final version of the class as if you're pressing some cast iron statue on the first try. While you're working with it, code is more like clay. It evolves as you develop it and learn more about the problem domain you are solving. During development classes may interact with each other than they should (dependency you plan to factor out), merge together, or split apart. So I think the debate boils down to people not wanting to religiously write
int getVar() const { return var ; }
So you have:
doSomething( obj->getVar() ) ;
Instead of
doSomething( obj->var ) ;
Not only is getVar() visually noisy, it gives this illusion that gettingVar() is somehow a more complex process than it really is. How you (as the class writer) regard the sanctity of var is particularly confusing to a user of your class if it has a passthru setter -- then it looks like you're putting up these gates to "protect" something you insist is valuable, (the sanctity of var) but yet even you concede var's protection isn't worth much by the ability for anyone to just come in and set var to whatever value they want, without you even peeking at what they are doing.
So I program as follows (assuming an "agile" type approach -- ie when I write code not knowing exactly what it will be doing/don't have time or experience to plan an elaborate waterfall style interface set):
1) Start with all public members for basic objects with data and behavior. This is why in all my C++ "example" code you'll notice me using struct instead of class everywhere.
2) When an object's internal behavior for a data member becomes complex enough, (for example, it likes to keep an internal std::list in some kind of order), accessor type functions are written. Because I'm programming by myself, I don't always set the member private right away, but somewhere down the evolution of the class the member will be "promoted" to either protected or private.
3) Classes that are fully fleshed out and have strict rules about their internals (ie they know exactly what they are doing, and you are not to "fuck" (technical term) with its internals) are given the class designation, default private members, and only a select few members are allowed to be public.
I find this approach allows me to avoid sitting there and religiously writing getter/setters when a lot of data members get migrated out, shifted around, etc. during the early stages of a class's evolution.
There is a good reason to consider using accessors is there is no property inheritance. See next example:
public class TestPropertyOverride {
public static class A {
public int i = 0;
public void add() {
i++;
}
public int getI() {
return i;
}
}
public static class B extends A {
public int i = 2;
#Override
public void add() {
i = i + 2;
}
#Override
public int getI() {
return i;
}
}
public static void main(String[] args) {
A a = new B();
System.out.println(a.i);
a.add();
System.out.println(a.i);
System.out.println(a.getI());
}
}
Output:
0
0
4
Getters and setters are used to implement two of the fundamental aspects of Object Oriented Programming which are:
Abstraction
Encapsulation
Suppose we have an Employee class:
package com.highmark.productConfig.types;
public class Employee {
private String firstName;
private String middleName;
private String lastName;
public String getFirstName() {
return firstName;
}
public void setFirstName(String firstName) {
this.firstName = firstName;
}
public String getMiddleName() {
return middleName;
}
public void setMiddleName(String middleName) {
this.middleName = middleName;
}
public String getLastName() {
return lastName;
}
public void setLastName(String lastName) {
this.lastName = lastName;
}
public String getFullName(){
return this.getFirstName() + this.getMiddleName() + this.getLastName();
}
}
Here the implementation details of Full Name is hidden from the user and is not accessible directly to the user, unlike a public attribute.
There is a difference between DataStructure and Object.
Datastructure should expose its innards and not behavior.
An Object should not expose its innards but it should expose its behavior, which is also known as the Law of Demeter
Mostly DTOs are considered more of a datastructure and not Object. They should only expose their data and not behavior. Having Setter/Getter in DataStructure will expose behavior instead of data inside it. This further increases the chance of violation of Law of Demeter.
Uncle Bob in his book Clean code explained the Law of Demeter.
There is a well-known heuristic called the Law of Demeter that says a
module should not know about the innards of the objects it
manipulates. As we saw in the last section, objects hide their data
and expose operations. This means that an object should not expose its
internal structure through accessors because to do so is to expose,
rather than to hide, its internal structure.
More precisely, the Law of Demeter says that a method f of a class C
should only call the methods of these:
C
An object created by f
An object passed as an argument to f
An object held in an instance variable of C
The method should not invoke methods on objects that are returned by any of the allowed functions.
In other words, talk to friends, not to strangers.
So according this, example of LoD violation is:
final String outputDir = ctxt.getOptions().getScratchDir().getAbsolutePath();
Here, the function should call the method of its immediate friend which is ctxt here, It should not call the method of its immediate friend's friend. but this rule doesn't apply to data structure. so here if ctxt, option, scratchDir are datastructure then why to wrap their internal data with some behavior and doing a violation of LoD.
Instead, we can do something like this.
final String outputDir = ctxt.options.scratchDir.absolutePath;
This fulfills our needs and doesn't even violate LoD.
Inspired by Clean Code by Robert C. Martin(Uncle Bob)
If you don't require any validations and not even need to maintain state i.e. one property depends on another so we need to maintain the state when one is change. You can keep it simple by making field public and not using getter and setters.
I think OOPs complicates things as the program grows it becomes nightmare for developer to scale.
A simple example; we generate c++ headers from xml. The header contains simple field which does not require any validations. But still as in OOPS accessor are fashion we generates them as following.
const Filed& getfield() const
Field& getField()
void setfield(const Field& field){...}
which is very verbose and is not required. a simple
struct
{
Field field;
};
is enough and readable.
Functional programming don't have the concept of data hiding they even don't require it as they do not mutate the data.
Additionally, this is to "future-proof" your class. In particular, changing from a field to a property is an ABI break, so if you do later decide that you need more logic than just "set/get the field", then you need to break ABI, which of course creates problems for anything else already compiled against your class.
One other use (in languages that support properties) is that setters and getters can imply that an operation is non-trivial. Typically, you want to avoid doing anything that's computationally expensive in a property.
One relatively modern advantage of getters/setters is that is makes it easier to browse code in tagged (indexed) code editors. E.g. If you want to see who sets a member, you can open the call hierarchy of the setter.
On the other hand, if the member is public, the tools don't make it possible to filter read/write access to the member. So you have to trudge though all uses of the member.
Getters and setters coming from data hiding. Data Hiding means We
are hiding data from outsiders or outside person/thing cannot access
our data.This is a useful feature in OOP.
As a example:
If you create a public variable, you can access that variable and change value in anywhere(any class). But if you create as private that variable cannot see/access in any class except declared class.
public and private are access modifiers.
So how can we access that variable outside:
This is the place getters and setters coming from. You can declare variable as private then you can implement getter and setter for that variable.
Example(Java):
private String name;
public String getName(){
return this.name;
}
public void setName(String name){
this.name= name;
}
Advantage:
When anyone want to access or change/set value to balance variable, he/she must have permision.
//assume we have person1 object
//to give permission to check balance
person1.getName()
//to give permission to set balance
person1.setName()
You can set value in constructor also but when later on when you want
to update/change value, you have to implement setter method.
I'm newbie to Java and I'm learning about encapsulation and saw an example where instance variables are declared as private in a class.
http://www.tutorialspoint.com/java/java_encapsulation.htm
I have 2 queries:
Why are instance variables private? Why not public?
What if instance variables are made public and accessed directly? Do we see any constraints?
Can you explain with an example as to what will go wrong in case the instance variables are declared as public in a class in Java?
Instance variables are made private to force the users of those class to use methods to access them.
In most cases there are plain getters and setters but other methods might be used as well.
Using methods would allow you, for instance, to restrict access to read only, i.e. a field might be read but not written, if there's no setter. That would not be possible if the field was public.
Additionally, you might add some checks or conversions for the field access, which would not be possible with plain access to a public field. If a field was public and you'd later like to force all access through some method that performs additional checks etc. You'd have to change all usages of that field. If you make it private, you'd just have to change the access methods later on.
If phone was private:
Consider this case:
class Address {
private String phone;
public void setPhone(String phone) {
this.phone = phone;
}
}
//access:
Address a = new Address();
a.setPhone("001-555-12345");
If we started with the class like this and later it would be required to perform checks on the phoneNumber (e.g. some minimum length, digits only etc.) you'd just have to change the setter:
class Address {
private String phone;
public void setPhone(String phone) {
if( !isValid( phone) ) { //the checks are performed in the isValid(...) method
throw new IllegalArgumentException("please set a valid phone number");
}
this.phone = phone;
}
}
//access:
Address a = new Address();
a.setPhone("001-555-12345"); //access is the same
If phone was public:
Someone could set phone like this and you could not do anything about it:
Address a = new Address();
a.phone="001-555-12345";
If you now want to force the validation checks to be performed you'd have to make it private and whoever wrote the above lines would have to change the second line to this:
a.setPhone("001-555-12345");
Thus you couldn't just add the checks without breaking other code (it wouldn't compile anymore).
Additionally, if you access all fields/properties of a class through methods you keep access consistent and the user would not have to worry about whether the property is stored (i.e. is a instance field) or calculated (there are just methods and no instance fields).
They don't have to be private - but they should be. A field is an implementation detail - so you should keep it private. If you want to allow users to fetch or set its value, you use properties to do so (get and set methods) - this lets you do it safely (e.g. validating input) and also allows you to change the implementation details (e.g. to delegate some of the values to other objects etc) without losing backward compatibility.
First, it is not true that all instance variables are private. Some of them are protected, which still preserves encapsulation.
The general idea of encapsulation is that a class should not expose its internal state. It should only use it for performing its methods. The reason is that each class has a so-called "state space". That is, a set of possible values for its fields. It can control its state space, but if it exposes it, others might put it in an invalid state.
For example, if you have two boolean fields, and the class can function properly only in 3 cases: [false, false], [false, true], and [true, false]. If you make the fields public, another object can set [true, true], not knowing the internal constraints, and the next method called on the original object will trigger unexpected results.
Making instance variables public or private is a design tradeoff the
designer makes when declaring the classes. By making instance
variables public, you expose details of the class implementation,
thereby providing higher efficiency and conciseness of expression at
the possible expense of hindering future maintenance efforts. By
hiding details of the internal implementation of a class, you have the
potential to change the implementation of the class in the future
without breaking any code that uses that class.
Oracle White Paper
Like has been pointed out by several answerers already, instance variables don't have to be private, but they are usually at the very least not made public, in order to preserve encapsulation.
I saw an example in (I think) Clean Code, which very well illustrates this. If I recall correctly, it was a complex number (as in a+bi) type; in any case, something very much like that, I don't have the book handy. It exposed methods to get the value of the real and imaginary parts as well as a method to set the value of the instance. The big benefit of this is that it allows the implementation to be completely replaced without breaking any consumers of the code. For example, complex numbers can be stored on one of two forms: as coordinates on the complex plane (a+bi), or in polar form (φ and |z|). Keeping the internal storage format an implementation detail allows you to change back and forth while still exposing the number on both forms, thus letting the user of the class pick whichever is more convenient for the operation they are currently performing.
In other situations, you may have a set of related fields, such as field x must have certain properties if field y falls inside a given range. A simplistic example would be where x must be in the range y through y+z, for numerical values and some arbitrary value z. By exposing accessors and mutators, you can enforce this relationship between the two values; if you expose the instance variables directly, the invariant falls apart immediately, since you cannot guarantee that someone won't set one but not the other, or set them so that the invariant no longer holds.
Of course, considering reflection, it's still possible to access members you aren't supposed to, but if someone is reflecting your class to access private members, they had better realize that what they are doing may very well break things. If they are using the public interface, they might think everything is fine, and then they end up with nasty bugs because they unknowingly did not fully adhere to the implementation details of your particular implementation.
In traditional Object-Oriented design, a class will encapsulate both data (variables) and behavior (methods). Having private data will give you flexibility as to how the behavior is implemented, so for example, an object could store a list of values and have a getAverage() method that computes and returns the mean of these values. Later on, you could optimize and cache the computed average in the class, but the contract (i.e., the methods) would not need to change.
It has become more popular the past few years (for better or worse) to use anemic data models, where a class is nothing but a bunch of fields and corresponding getters and setters. I would argue that in this design you would be better off with public fields, since the getters and setters provide no real encapsulation, but just fool you into thinking you are doing real OO.
UPDATE: The example given in the link in the question is a perfect example of this degenerate encapsulation. I realize the author is trying to provide a simple example, but in doing so, fails to convey any real benefit of encapsulation (at least not in the example code).
Because if you change the structure of the class (removing fields etc.); it will cause bugs. But if you have a getX() method you can calculate the needed value there (if field was removed).
You have the problem then that the class does not know if something is changed and can't guarantee integrity.
Well keeping fields private has many advantages as suggested above.
Next best level is to keep them package private using java default access level.
Default level avoid cluttering in your own code and prevents clients of your code from setting invalid values.
For user of class
We, who are using ide like eclipse, netbins.....
saw that it suggest us for public method, so if creator of class provide getter and setter for private instance variable you do not have to memorize the name of variable. just write set press ctrl+space you are getting all of setter method created by creator of that class and choose your desired method to set your variable value.
For creator of class
Sometimes you need to specify some logic to set variable value.
"suppose you have an integer variable which should store 0
This question already has answers here:
Is it in an anti-pattern to always use get and set methods to access a class's own member fields? [duplicate]
(11 answers)
Closed 9 years ago.
Usually, in my own projects I use getters and setters for any field access, and I followed to do the same on my job. Some time ago, the tech lead of our project asked me why I was doing that and why is this better than just using fields themselves (with an option of declaring them protected if they needed to be accessed by subclasses). I couldn't come up with a clear answer.
So, are there any reasons to using getters and setters inside a class for class' own fields, or is it better to use fields directly?
The most obvious answer is side effects:
int getCost()
{
if (cost == null) {
calculateCost();
}
return cost;
}
If you need the cost, use getCost(). If you want to see if cost has been calculated, use cost.
If there is any business logic around those values (or there is the potential for such logic), then there is a benefit to using getters and setters even for internal calls.
For example, your setter might do validation on its inputs, and throw an exception rather than store an invalid value. Having all your code use that setter rather than simply setting values directly means that the error is caught at the time it is made rather than a long time later when that value is used. A similar case for a getter is when there is a logical default value, which should be used in case of a null. By using a getter, you can safely write local methods without needing continuous null checks or default options.
That said, if there's no business logic in those methods, and no side effects caused by them, then it's mostly a stylistic thing. It is essentially the responsibility of the class to be internally consistent, and as long as it remains so then it's mostly personal/professional preference whether you access the variables directly or through wrapping methods.
You want to declare them as public getters and setters, and private fields. This means external classes (not subclasses) who want to modify the variables all do so through the setters, and get them through the getters. The benefit of this is that if you want to control how or what condition they get or set them, or want to add information or even print debug, it means you only have to put it in the getters and setters.
There's a really good explanation of the benefits on stackoverflow actually:
In Java, difference between default, public, protected, and private
Of course, only make methods when they're actually needed, and similarly, only public when needed by external classes.
Hope that helps the defense!
This is part of the general question as to why you use getters and setters. Many developers use them without though, as a matter of practice. Personally, I only put in getters/setters if I need to.
I would suggest you do what is clearest/simplest to you.
In general, if I can easily add a getter/setter later should I need it, I won't add it. If it would be difficult to add later (or you have an immediate use for them), I would include them.
Some of us are web developers so, we resort to creating JavaBeans and JavaBeans has its own specification. In the specification, it clearly states:
The class must have a public default constructor (no-argument).
The class properties must be accessible using get, set, is (used for boolean properties instead of get) and other methods.
The class should be serializable.
The reason being, JavaBeans were designed for Reusability where JavaBeans could travel through any Java technologies (e.g. Servlets, JSPs, RMI, Web Services, etc.).
That's my 2cent worth on why we have getters/setters. I mostly create JavaBeans.
Some people think that they should always encapsulate all fields by using setters/getters.
Others think that this practice should not be used at all.
If your class does not have any logic for the fields and just is used as a holder, you can skip using methods and just declare your fields as public. This concept is also called a Data Transfer Object (or Messenger.) But as a rule you should use final attribute for such fields to make your class immutable:
public class TwoTuple<A,B> {
public final A first;
public final B second;
public TwoTuple(A a, B b) { first = a; second = b; }
}
However you must/or it's strongly recommended to use setters/getters:
in web applications sometimes there are requirements to use setters/getters. See POJO/JavaBean objects.
if your class is going to be used in concurrent environment. See Java Concurrency in Practice, Section 3.2:
"Whether another thread actually does something with a published reference doesn't really matter, because the risk of misuse is still present.[7] Once an object escapes, you have to assume that another class or thread may, maliciously or carelessly, misuse it. This is a compelling reason to use encapsulation: it makes it practical to analyze programs for correctness and harder to violate design constraints accidentally"
if you want to add some extra logic when you set/get values you must use setters/getters. Just read about encapsulation and its advantages.
My own opinion always declare fields as "private final" and only then, if needed change these properties.
I am new to programming. I am learning Java now, there is something I am not really sure, that the use of private. Why programmer set the variable as private then write , getter and setter to access it. Why not put everything in public since we use it anyway.
public class BadOO {
public int size;
public int weight;
...
}
public class ExploitBadOO {
public static void main (String [] args) {
BadOO b = new BadOO();
b.size = -5; // Legal but bad!!
}
}
I found some code like this, and i saw the comment legal but bad. I don't understand why, please explain me.
The most important reason is to hide the internal implementation details of your class. If you prevent programmers from relying on those details, you can safely modify the implementation without worrying that you will break existing code that uses the class.
So by declaring the field private you prevent a user from accessing the variable directly. By providing gettters and setters you control exactly how a user may control the variable.
The main reason to not just make the variable public in the first place is that if you did make it public, you would create more headaches later on.
For example, one programmer writes public getters and setters around a private member variable. Three months later, he needs to verify that the variable is never "set" to null. He adds in a check in the "setFoo(...)" method, and all attempts to set the variable will then be checked for "setting it to null". Case closed, and with little effort.
Another programmer realizes that putting in public getters and setters around a private member variable is violating the spirit of encapsulation, he sees the futility of the methods and decides to just make the member variable public. Perhaps this gains a bit of a performance boost, or perhaps the programmer just wants to "write it as it is used". Three months later, he needs to verify that the variable is never "set" to null. He scans every access to the variable, effectively searching through the entire code base, including all code that might be accessing the variable via reflection. This includes all 3rd party libraries which has extended his code, and all newly written modules which used his code after it was written. He then either modifies all calls to guarantee that the variable is never set to null. The case is never closed, because he can't effectively find all accesses to the exposed member, nor does he have access to all 3rd party source code. With imperfect knowledge of newly written modules, the survey is guaranteed to be incomplete. Finally he has no control over the future code which may access the public member, and that code may contain lines which set the member variable to null.
Of course the second programmer could then break all existing code by putting "get" and "set" methods around the variable and making it private, but hey, he could have done that three months earlier and saved himself the explanation of why he needed to break everyone else's code.
Call it what you will, but putting public "get" and "set" methods around a private member variable is defensive programming which has been brought about by many years (i.e. decades) of experience.
Anything public in your class is a contract with the users of the class. As you modify the class, you must maintain the contract. You can add to the contract (new methods, variables, etc.), but you can't remove from it. Idealy you want that contract to be as small as possible. It is useful to make everything private that you can. If you need direct access from package members, make it protected. Only make those things public which are required by your users.
Exposing variables means that you are contracting forever, to have that variable and allow users to modify it. As discussed above, you may find you need to invoke behaviour when a variable is accessed. This can be be done if you only contract for the getter and setter methods.
Many of the early Java classes have contracts which require them to be thread safe. This adds significant overhead in cases where only one thread can access the instance. Newer releases have new classes which duplicate or enhance the functionality but drop the syncronization. Hence StringBuilder was added and in most cases should be used instead of StringBuffer.
Its considered bad mainly because you loose control over who can change the value and what happens when the value changes.
In tiny application written by you for you it won't seem that important but as you start developing for larger and larger applications having control over who changes what and when becomes critical.
Imagine from your example above, you publish library as is, other people use it, then you decide you wanted to calculate another value in your bad class when the size changes ... suddenly the bad00 class has no way of knowing and you can't change it because other people rely on it.
Instead if you had a set method you could extend it to say
void SetSize(int newSize)
{
size = newSize;
DoCalculation;
}
You can extend the functionality without breaking other peoples reliance on you.
I highly recommend the book Effective Java, it contains a lot of useful information about how to write better programs in Java.
Your question is addressed in items 13 and 14 of that book:
Item 13: Minimize the accessibility of classes and members
Item 14: In public classes, use accessor methods, not public fields
You shouldn't allow implementations to alter your records directly. Providing getters and setters means that you have exact control over how variables get assigned or what gets returned, etc. The same thing goes for the code in your constructor. What if the setter does something special when you assign a value to size? This won't happen if you assign it directly.
It's a common pet-peeve of many programmers - Java code with private fields and public accessors and mutators. The effect is as you say, those fields might as well been public.
There are programming languages that voice for the other extreme, too. Look at Python; just about everything is public, to some extent.
These are different coding practices and a common thing programmers deal with every day. But in Java, here's my rule of thumb:
If the field is used purely as an attribute, both readable and writeable by anyone, make it public.
If the field is used internally only, use private. Provide a getter if you want read access, and provide a setter if you want write access.
There is a special case: sometimes, you want to process extra data when an attribute is accessed. In that case, you would provide both getters and setters, but inside these property functions, you would do more than just return - for example, if you want to track the number of times an attribute is read by other programs during an object's life time.
That's just a brief overview on access levels. If you're interested, also read up on protected access.
This is indeed used to hide the internal implementation. This also helps is providing extra bit of logic on your variables. Say you need to make sure that the value passed for a varable should not be 0/null, you can provide this logic in the set method. Also in the same way you can provide some logic while getting the value, say you have a object variable which is not initialised and you are accessing that object, in this case you cand provide the logic to null check for that object and always return an object.
C# programmers use this equally as much, or maybe more frequently than I see in Java. C# calls it properties where in Java it is accessors/mutators
For me it makes sense to have getter and setter methods to encapsulate the classes so that no class can change the instance variables of another class.
Okay. We are talking about Objects here. The real world objects. If they are not private,the user of your class is allowed to change. What if for a Circle class, and for the radius attribute/property of the Circle class, the user sets value as '0'. It doesn't make sense for a Circle to exist with radius as '0'. You can avoid such mistakes if you make your attributes private and give a setter method and in which and throw an Exception/Error (instructing the user ) that it is not allowed to create a Circle with radisu as '0'. Basically, the objects that are created out of your class - are meant to exist as you wished to have them exist. This is one of the ways to achieve it.
As stated earlier, the reason for making a variable private is to hide it from the outside. But if you make a getter AND a setter then you may as well make the variable itself public. If you find yourself later in a position that you made the wrong choice, then you must refactor your code from using the public variable into using the getter/setter which may not be a problem. But it can be a problem if other code, which you do not control, starts depending on your code. Then such a refactoring will break the other code. If you use getters and setters from the start you will reduce that risk in exchange for a little effort. So it depends on your situation.
It depends on who access these public variables. Most likely, only by people inside your company/team. Then it's trivial to refactor them into getters/setters when necessary. I say in this case, it's better to leave the variables public; unless you are forced to follow the java bean convention.
If you are writing a framework or a library intended for the public, then you shouldn't expose variables. It's impossible for you to change them into getters/setters later.
But the 2nd case is more rare than the first; people apply extremely unreasonable assumptions when it come to software engineer, as if they are not writing code, instead they are carving code in stone. And as if the whole world is watching while you code - in reality, nobody will ever read your code except yourself