I have installed Java 8 and set my JAVA_HOME and JRE_HOME paths and added %JAVA_HOME% to the start of the path variable.
I created a helloworld.java application and am able to compile it using:
javac helloworld.java
However, when I try to run:
java helloworld
I get the error:
The system cannot find the file C:\ProgramData\Oracle\Java\javapath\java.exe
How can I solve this?
1.Just go to C:\ProgramData\Oracle\Java\javapath\
2.You will find there shortcuts for java.exe,javaw.exe,javaws.exe which are pointing to a location where they actually are not existing now
3.Go to the jre location where you have installed java like C:\Program Files\Java\jre6\bin
You will find java.exe,javaw.exe,javaws.exe
Create shortcuts for these files and replace with the ones which are present in C:\ProgramData\Oracle\Java\javapath.
It works
Just set %JAVA_HOME%/bin to your path variable.
If you are blocked from modifying system variables from command line, but are able to open up an elevated command prompt, then run a command like this:
setx \M JAVA_HOME "C:\Program Files\Java\jdk1.8.0_25"
But of course, change the directory to point to your installed version of java. Note that the JAVA_HOME path does not point into the bin directory, it stops one level above bin.
I was able to solve this issue. To do so I used the advice from this answer:
Java SE Development Kit 8u25 on a 64-bit Windows 8
Set the following user environment variables (== environment variables of type user variables)
•JAVA_HOME : C:\Program Files\Java\jdk1.8.0_25
•JDK_HOME : %JAVA_HOME%
•JRE_HOME : %JAVA_HOME%\jre
•CLASSPATH : .;%JAVA_HOME%\lib;%JAVA_HOME%\jre\lib
•PATH : your-unique-entries;%JAVA_HOME%\bin
(make sure that the longish your-unique-entries does not contain any other references to another Java installation folder.)
Related
I have installed Java 8 and set my JAVA_HOME and JRE_HOME paths and added %JAVA_HOME% to the start of the path variable.
When I try to run simple java program I get error as
"The system cannot find the file C:\spl\java\bin\bin\java.exe".
The above path contains extra bin.
Where as environment variable and JAVA_HOME has C:\spl\java\bin\ this path.
I cannot understand from where this extra bin directory is coming.
Please help.
From where does system is taking C:\spl\java\bin\bin\ this path?
Your JAVA_HOME should point to the ...\Java\jdk1.8.. directory.
In Your path you should have %JAVA_HOME%\bin.
Some applications refer to JAVA_HOME and add \bin on their own, so you must not add \bin to your JAVA_HOME. Otherwise, you'll receive correct error saying, that C:\spl\java\bin\bin\ doesn't contain Java.exe
Solution:
Remove \bin from your JAVA_HOME
It is quite clear from your example: the system is taking %JAVA_HOME% as the "home" of your java installation, not its bin directory. So when you try to start java.exe, it looks in %JAVA_HOME%\bin. Just remove the bin part of your JAVA_HOME.
When I am trying to run my Modular Audio Recognition Framework (MARF) jar files, it gives me the message:
C:\Program Files (x86)\Java\jre1.8.0_65\lib\i386\jvm.cfg
I see that the directory it is trying to look for the file is incorrect. I have an updated Java jre folder in Program Files. Is there a way to redirect it?
I have tried going to the Environment variables and none actually point to this folder.
CLASSPATH=C:\Program Files\Java\jre1.8.0_60
JAVA_HOME=C:\Program Files\Java\jdk1.8.0_60
PATH=C:\Program Files\Java\jdk1.8.0_60\bin
What happen if you run following from the command line?
set environment variables
set JAVA_HOME=C:\Program Files\Java\jre1.8.0_60
set PATH=%JAVA_HOME%\bin;%PATH%
check the Java version
java -version
run your application
java -jar SpeakerIdent.jar
When I do ant -version on command line, it says not recognized. Any ideas on how to fix? I'm trying to make a build.xml for a Java project.
You have set JAVA_HOME and ANT_HOME as User environment variable. The path you set is in System environment variable.
You can fix it by many ways. One way will be to define JAVA_HOME and ANT_HOME in System Environment setting.
Another way will be to modify PATH variable in user environment section.
Make sure your JAVA_HOME and ANT_HOME and PATH are set correctly.
ANT_HOME is used by the launcher script for finding the libraries.
JAVA_HOME is used by the launcher for finding the JDK/JRE to use. (JDK is recommended as some tasks require the java tools.) If not set, the launcher tries to find one via the %PATH% environment variable.
PATH is set for user convenience. With that set you can just start ant instead of always typing the/complete/path/to/your/ant/installation/bin/ant.
Set these variables correctly and open a new cmd window (don't use old cmd window, please open new window)
type echo %PATH% , should show java and ant
Open command window(cmd) and type
java -version
If this shows java version , this means java is in your path and working.
finally type ant -version
I want to use elastic search with my PHP application.
after running service install command , I am getting fallowing error.
C:\elasticsearch-0.90.10\bin>service install
JAVA_HOME points to an invalid Java installation (no java.exe found in "C:\Progr
am Files (x86)\Java\jdk1.7.0_25\bin"). Existing...
Open up and Look into the service.bat file:
It searches for:
%JAVA_HOME%\bin\java.exe
hence your %JAVA_HOME% should not include bin in it.
A workaround if you do not have privileges to set up the environmental variables:
open the service.bat file,
a) Remove the line:
if NOT DEFINED JAVA_HOME goto err
b) Replace %JAVA_HOME% with your java jdk path, something like: C:\Program Files\Java\jdk1.7.0_51
Note: This is just a workaround which works all the time.
from your error message we can see your JAVA_HOME points to
C:\Program Files (x86)\Java\jdk1.7.0_25\bin
while it should point to
C:\Program Files (x86)\Java\jdk1.7.0_25
I think the error message is fairly descriptive , you should look in this folder
is java.exe there ? If not then your JAVA_HOME environment variable to point to the correct installation
heres a page showing how to do that
https://confluence.atlassian.com/display/DOC/Setting+the+JAVA_HOME+Variable+in+Windows
1st hit on google.
Either JAVA_HOME points to the wrong location or you don't have Java installed. Check and see if there's an install of Java in the location specified.
Also note that the JAVA_HOME variable should point to the root of the Java install not the /bin folder. This is being added by the program you're executing.
To change the JAVA_HOME variable to test further use the following in the command prompt:
set JAVA_HOME=c:\xxxx
Once you've established the correct value to use this can be permanently changed in Control Panel>>System>>Advanced System Settings>>Advanced>>Environment Variables
set JAVA_HOME=C:\Program Files (x86)\Java
Above must fix the issue, I came across the same issue while installing the elastic search.
i gave a try by giving "bin" part of path but it did not work, so i just give the top folder "java" in path, it worked.
Just to add my own experience.
i was setting JAVA_HOME using tab autocompletion.
It ends up something like "C:\Program files...:" and it didn't work saying that it cannot find the java program. I solved typing the JAVA_HOME path in the set command without using tab completion. The problem was probably related to the " in the env variable
What can I do when I keep receiving the error
'javac' is not recognized as an internal or external command, operable program or batch file
when I want to compile my jar or .class file?
Thanks
Make sure %JAVA_HOME%/bin is on your %PATH% (or $JAVA_HOME on the $PATH in *nix).
It means that it is not in your path. You have the following options:
1) Change to the directory where javac lives before calling it.
2) Use the full path to javac when making the call, e.g. C:\java\jdk1.6.0_12\bin\javac ...
3) Add the javac directory to the PATH environment variable
This just means that javac isn't in your PATH variable.
On Windows, you just have to add the folder that contains javac.exe to the PATH environment variable (Win+Pause/Break).
On Linux/Mac/Unix, just append that directory to $PATH in .bashrc or similar.
The error that you are seeing is generated by Windows, and isn't specific to Java. That error means that you typed a command and Windows could not find the command by that name.
The easiest way of rectifying the situation is to ensure that Java is properly installed in your system's PATH.
First, ensure that you have a JDK installed (and not just a JRE). Your next best bet is to add an environment variable called JAVA_HOME and point it at the base install directory for the version of Java that you installed.
Next, modify your PATH environment variable by prepending the string %JAVA_HOME%\bin; to whatever is already in your PATH. If you look at the contents of that directory, you will see that javac is in there (along with a number of other Java development tools).
You have to install JDK (which includes javac compiler) and ensure that it's in the path. See http://java.sun.com/javase/downloads/index.jsp
Common Error Messages from SUN Tutorial page
Step 4 (Update the PATH variable) of the JDK installation instructions explains what you should do to make it so that you can just type javac in the command prompt window.
The link below gives a step by step explanation on how to set up java_home and path variables.
JAVA_HOME setup
Even if I had
JDK installed
JAVA_HOME defined
%JAVA_HOME%\bin present in my %PATH%
I still had this error. I resolved it by eliminating the JRE from my path variable. It was put before JAVA_HOME, has no javac. It seems Windows can't find javac in JAVA_HOME\bin in this case.
For Windows
Control Panel > System...Then click Advanced System Setting (left pane)...then popup window will open...then click Environment Variables...Then another window will open...click New and add enter information below
Variable name: PATH
Variable value: C:\Program Files\Java\jdk1.7.0_45\bin [*make sure this is the right path for you]
Then it should work
Check whether you have JDK installed; if not installed, Install
If JDK is installed, navigate into the bin folder of the installation, and try to execute javac.
If javac executes, proceed (+:
If javac does not execute, check your system path, and java path, and return to 2 above!