Develop Reference

How do I create a Set with a Tuple value which will read the points in the Tuple [duplicate]

Recently I read through this
Developer Works Document.
The document is all about defining hashCode() and equals() effectively and correctly, however I am not able to figure out why we need to override these two methods.
How can I take the decision to implement these methods efficiently?

Joshua Bloch says on Effective Java
You must override hashCode() in every class that overrides equals(). Failure to do so will result in a violation of the general contract for Object.hashCode(), which will prevent your class from functioning properly in conjunction with all hash-based collections, including HashMap, HashSet, and Hashtable.
Let's try to understand it with an example of what would happen if we override equals() without overriding hashCode() and attempt to use a Map.
Say we have a class like this and that two objects of MyClass are equal if their importantField is equal (with hashCode() and equals() generated by eclipse)
public class MyClass {
private final String importantField;
private final String anotherField;
public MyClass(final String equalField, final String anotherField) {
this.importantField = equalField;
this.anotherField = anotherField;
}
#Override
public int hashCode() {
final int prime = 31;
int result = 1;
result = prime * result
+ ((importantField == null) ? 0 : importantField.hashCode());
return result;
}
#Override
public boolean equals(final Object obj) {
if (this == obj)
return true;
if (obj == null)
return false;
if (getClass() != obj.getClass())
return false;
final MyClass other = (MyClass) obj;
if (importantField == null) {
if (other.importantField != null)
return false;
} else if (!importantField.equals(other.importantField))
return false;
return true;
}
}
Imagine you have this
MyClass first = new MyClass("a","first");
MyClass second = new MyClass("a","second");
Override only equals
If only equals is overriden, then when you call myMap.put(first,someValue) first will hash to some bucket and when you call myMap.put(second,someOtherValue) it will hash to some other bucket (as they have a different hashCode). So, although they are equal, as they don't hash to the same bucket, the map can't realize it and both of them stay in the map.
Although it is not necessary to override equals() if we override hashCode(), let's see what would happen in this particular case where we know that two objects of MyClass are equal if their importantField is equal but we do not override equals().
Override only hashCode
If you only override hashCode then when you call myMap.put(first,someValue) it takes first, calculates its hashCode and stores it in a given bucket. Then when you call myMap.put(second,someOtherValue) it should replace first with second as per the Map Documentation because they are equal (according to the business requirement).
But the problem is that equals was not redefined, so when the map hashes second and iterates through the bucket looking if there is an object k such that second.equals(k) is true it won't find any as second.equals(first) will be false.
Hope it was clear

Collections such as HashMap and HashSet use a hashcode value of an object to determine how it should be stored inside a collection, and the hashcode is used again in order to locate the object
in its collection.
Hashing retrieval is a two-step process:
Find the right bucket (using hashCode())
Search the bucket for the right element (using equals() )
Here is a small example on why we should overrride equals() and hashcode().
Consider an Employee class which has two fields: age and name.
public class Employee {
String name;
int age;
public Employee(String name, int age) {
this.name = name;
this.age = age;
}
public String getName() {
return name;
}
public void setName(String name) {
this.name = name;
}
public int getAge() {
return age;
}
public void setAge(int age) {
this.age = age;
}
#Override
public boolean equals(Object obj) {
if (obj == this)
return true;
if (!(obj instanceof Employee))
return false;
Employee employee = (Employee) obj;
return employee.getAge() == this.getAge()
&& employee.getName() == this.getName();
}
// commented
/* #Override
public int hashCode() {
int result=17;
result=31*result+age;
result=31*result+(name!=null ? name.hashCode():0);
return result;
}
*/
}
Now create a class, insert Employee object into a HashSet and test whether that object is present or not.
public class ClientTest {
public static void main(String[] args) {
Employee employee = new Employee("rajeev", 24);
Employee employee1 = new Employee("rajeev", 25);
Employee employee2 = new Employee("rajeev", 24);
HashSet<Employee> employees = new HashSet<Employee>();
employees.add(employee);
System.out.println(employees.contains(employee2));
System.out.println("employee.hashCode(): " + employee.hashCode()
+ " employee2.hashCode():" + employee2.hashCode());
}
}
It will print the following:
false
employee.hashCode(): 321755204 employee2.hashCode():375890482
Now uncomment hashcode() method , execute the same and the output would be:
true
employee.hashCode(): -938387308 employee2.hashCode():-938387308
Now can you see why if two objects are considered equal, their hashcodes must
also be equal? Otherwise, you'd never be able to find the object since the default
hashcode method in class Object virtually always comes up with a unique number
for each object, even if the equals() method is overridden in such a way that two
or more objects are considered equal. It doesn't matter how equal the objects are if
their hashcodes don't reflect that. So one more time: If two objects are equal, their
hashcodes must be equal as well.

You must override hashCode() in every
class that overrides equals(). Failure
to do so will result in a violation of
the general contract for
Object.hashCode(), which will prevent
your class from functioning properly
in conjunction with all hash-based
collections, including HashMap,
HashSet, and Hashtable.
   from Effective Java, by Joshua Bloch
By defining equals() and hashCode() consistently, you can improve the usability of your classes as keys in hash-based collections. As the API doc for hashCode explains: "This method is supported for the benefit of hashtables such as those provided by java.util.Hashtable."
The best answer to your question about how to implement these methods efficiently is suggesting you to read Chapter 3 of Effective Java.

Why we override equals() method
In Java we can not overload how operators like ==, +=, -+ behave. They are behaving a certain way. So let's focus on the operator == for our case here.
How operator == works.
It checks if 2 references that we compare point to the same instance in memory. Operator == will resolve to true only if those 2 references represent the same instance in memory.
So now let's consider the following example
public class Person {
private Integer age;
private String name;
..getters, setters, constructors
}
So let's say that in your program you have built 2 Person objects on different places and you wish to compare them.
Person person1 = new Person("Mike", 34);
Person person2 = new Person("Mike", 34);
System.out.println ( person1 == person2 ); --> will print false!
Those 2 objects from business perspective look the same right? For JVM they are not the same. Since they are both created with new keyword those instances are located in different segments in memory. Therefore the operator == will return false
But if we can not override the == operator how can we say to JVM that we want those 2 objects to be treated as same. There comes the .equals() method in play.
You can override equals() to check if some objects have same values for specific fields to be considered equal.
You can select which fields you want to be compared. If we say that 2 Person objects will be the same if and only if they have the same age and same name, then the IDE will create something like the following for automatic generation of equals()
#Override
public boolean equals(Object o) {
if (this == o) return true;
if (o == null || getClass() != o.getClass()) return false;
Person person = (Person) o;
return age == person.age &&
name.equals(person.name);
}
Let's go back to our previous example
Person person1 = new Person("Mike", 34);
Person person2 = new Person("Mike", 34);
System.out.println ( person1 == person2 ); --> will print false!
System.out.println ( person1.equals(person2) ); --> will print true!
So we can not overload == operator to compare objects the way we want but Java gave us another way, the equals() method, which we can override as we want.
Keep in mind however, if we don't provide our custom version of .equals() (aka override) in our class then the predefined .equals() from Object class and == operator will behave exactly the same.
Default equals() method which is inherited from Object will check whether both compared instances are the same in memory!
Why we override hashCode() method
Some Data Structures in java like HashSet, HashMap store their elements based on a hash function which is applied on those elements. The hashing function is the hashCode()
If we have a choice of overriding .equals() method then we must also have a choice of overriding hashCode() method. There is a reason for that.
Default implementation of hashCode() which is inherited from Object considers all objects in memory unique!
Let's get back to those hash data structures. There is a rule for those data structures.
HashSet can not contain duplicate values and HashMap can not contain duplicate keys
HashSet is implemented with a HashMap behind the scenes where each value of a HashSet is stored as a key in a HashMap.
So we have to understand how a HashMap works.
In a simple way a HashMap is a native array that has some buckets. Each bucket has a linkedList. In that linkedList our keys are stored. HashMap locates the correct linkedList for each key by applying hashCode() method and after that it iterates through all elements of that linkedList and applies equals() method on each of these elements to check if that element is already contained there. No duplicate keys are allowed.
When we put something inside a HashMap, the key is stored in one of those linkedLists. In which linkedList that key will be stored is shown by the result of hashCode() method on that key. So if key1.hashCode() has as a result 4, then that key1 will be stored on the 4th bucket of the array, in the linkedList that exists there.
By default hashCode() method returns a different result for each different instance. If we have the default equals() which behaves like == which considers all instances in memory as different objects we don't have any problem.
But in our previous example we said we want Person instances to be considered equal if their ages and names match.
Person person1 = new Person("Mike", 34);
Person person2 = new Person("Mike", 34);
System.out.println ( person1.equals(person2) ); --> will print true!
Now let's create a map to store those instances as keys with some string as pair value
Map<Person, String> map = new HashMap();
map.put(person1, "1");
map.put(person2, "2");
In Person class we have not overridden the hashCode method but we have overridden equals method. Since the default hashCode provides different results for different java instances person1.hashCode() and person2.hashCode() have big chances of having different results.
Our map might end with those persons in different linkedLists.
This is against the logic of a HashMap
A HashMap is not allowed to have multiple equal keys!
But ours now has and the reason is that the default hashCode() which was inherited from Object Class was not enough. Not after we have overridden the equals() method on Person Class.
That is the reason why we must override hashCode() method after we have overridden equals method.
Now let's fix that. Let's override our hashCode() method to consider the same fields that equals() considers, namely age, name
public class Person {
private Integer age;
private String name;
..getters, setters, constructors
#Override
public boolean equals(Object o) {
if (this == o) return true;
if (o == null || getClass() != o.getClass()) return false;
Person person = (Person) o;
return age == person.age &&
name.equals(person.name);
}
#Override
public int hashCode() {
return Objects.hash(name, age);
}
}
Now let's try again to save those keys in our HashMap
Map<Person, String> map = new HashMap();
map.put(person1, "1");
map.put(person2, "2");
person1.hashCode() and person2.hashCode() will definitely be the same. Let's say it is 0.
HashMap will go to bucket 0 and in that LinkedList will save the person1 as key with the value "1". For the second put HashMap is intelligent enough and when it goes again to bucket 0 to save person2 key with value "2" it will see that another equal key already exists there. So it will overwrite the previous key. So in the end only person2 key will exist in our HashMap.
Now we are aligned with the rule of Hash Map that says no multiple equal keys are allowed!

Identity is not equality.
equals operator == test identity.
equals(Object obj) method compares equality test(i.e. we need to tell equality by overriding the method)
Why do I need to override the equals and hashCode methods in Java?
First we have to understand the use of equals method.
In order to identity differences between two objects we need to override equals method.
For example:
Customer customer1=new Customer("peter");
Customer customer2=customer1;
customer1.equals(customer2); // returns true by JVM. i.e. both are refering same Object
------------------------------
Customer customer1=new Customer("peter");
Customer customer2=new Customer("peter");
customer1.equals(customer2); //return false by JVM i.e. we have two different peter customers.
------------------------------
Now I have overriden Customer class equals method as follows:
#Override
public boolean equals(Object obj) {
if (this == obj) // it checks references
return true;
if (obj == null) // checks null
return false;
if (getClass() != obj.getClass()) // both object are instances of same class or not
return false;
Customer other = (Customer) obj;
if (name == null) {
if (other.name != null)
return false;
} else if (!name.equals(other.name)) // it again using bulit in String object equals to identify the difference
return false;
return true;
}
Customer customer1=new Customer("peter");
Customer customer2=new Customer("peter");
Insteady identify the Object equality by JVM, we can do it by overring equals method.
customer1.equals(customer2); // returns true by our own logic
Now hashCode method can understand easily.
hashCode produces integer in order to store object in data structures like HashMap, HashSet.
Assume we have override equals method of Customer as above,
customer1.equals(customer2); // returns true by our own logic
While working with data structure when we store object in buckets(bucket is a fancy name for folder). If we use built-in hash technique, for above two customers it generates two different hashcode. So we are storing the same identical object in two different places. To avoid this kind of issues we should override the hashCode method also based on the following principles.
un-equal instances may have same hashcode.
equal instances should return same hashcode.

Simply put, the equals-method in Object check for reference equality, where as two instances of your class could still be semantically equal when the properties are equal. This is for instance important when putting your objects into a container that utilizes equals and hashcode, like HashMap and Set. Let's say we have a class like:
public class Foo {
String id;
String whatevs;
Foo(String id, String whatevs) {
this.id = id;
this.whatevs = whatevs;
}
}
We create two instances with the same id:
Foo a = new Foo("id", "something");
Foo b = new Foo("id", "something else");
Without overriding equals we are getting:
a.equals(b) is false because they are two different instances
a.equals(a) is true since it's the same instance
b.equals(b) is true since it's the same instance
Correct? Well maybe, if this is what you want. But let's say we want objects with the same id to be the same object, regardless if it's two different instances. We override the equals (and hashcode):
public class Foo {
String id;
String whatevs;
Foo(String id, String whatevs) {
this.id = id;
this.whatevs = whatevs;
}
#Override
public boolean equals(Object other) {
if (other instanceof Foo) {
return ((Foo)other).id.equals(this.id);
}
}
#Override
public int hashCode() {
return this.id.hashCode();
}
}
As for implementing equals and hashcode I can recommend using Guava's helper methods

Let me explain the concept in very simple words.
Firstly from a broader perspective we have collections, and hashmap is one of the datastructure in the collections.
To understand why we have to override the both equals and hashcode method, if need to first understand what is hashmap and what is does.
A hashmap is a datastructure which stores key value pairs of data in array fashion. Lets say a[], where each element in 'a' is a key value pair.
Also each index in the above array can be linked list thereby having more than one values at one index.
Now why is a hashmap used?
If we have to search among a large array then searching through each if them will not be efficient, so what hash technique tells us that lets pre process the array with some logic and group the elements based on that logic i.e. Hashing
EG: we have array 1,2,3,4,5,6,7,8,9,10,11 and we apply a hash function mod 10 so 1,11 will be grouped in together. So if we had to search for 11 in previous array then we would have to iterate the complete array but when we group it we limit our scope of iteration thereby improving speed. That datastructure used to store all the above information can be thought of as a 2d array for simplicity
Now apart from the above hashmap also tells that it wont add any Duplicates in it. And this is the main reason why we have to override the equals and hashcode
So when its said that explain the internal working of hashmap , we need to find what methods the hashmap has and how does it follow the above rules which i explained above
so the hashmap has method called as put(K,V) , and according to hashmap it should follow the above rules of efficiently distributing the array and not adding any duplicates
so what put does is that it will first generate the hashcode for the given key to decide which index the value should go in.if nothing is present at that index then the new value will be added over there, if something is already present over there then the new value should be added after the end of the linked list at that index. but remember no duplicates should be added as per the desired behavior of the hashmap. so lets say you have two Integer objects aa=11,bb=11.
As every object derived from the object class, the default implementation for comparing two objects is that it compares the reference and not values inside the object. So in the above case both though semantically equal will fail the equality test, and possibility that two objects which same hashcode and same values will exists thereby creating duplicates. If we override then we could avoid adding duplicates.
You could also refer to Detail working
import java.util.HashMap;
public class Employee {
String name;
String mobile;
public Employee(String name,String mobile) {
this.name = name;
this.mobile = mobile;
}
#Override
public int hashCode() {
System.out.println("calling hascode method of Employee");
String str = this.name;
int sum = 0;
for (int i = 0; i < str.length(); i++) {
sum = sum + str.charAt(i);
}
return sum;
}
#Override
public boolean equals(Object obj) {
// TODO Auto-generated method stub
System.out.println("calling equals method of Employee");
Employee emp = (Employee) obj;
if (this.mobile.equalsIgnoreCase(emp.mobile)) {
System.out.println("returning true");
return true;
} else {
System.out.println("returning false");
return false;
}
}
public static void main(String[] args) {
// TODO Auto-generated method stub
Employee emp = new Employee("abc", "hhh");
Employee emp2 = new Employee("abc", "hhh");
HashMap<Employee, Employee> h = new HashMap<>();
//for (int i = 0; i < 5; i++) {
h.put(emp, emp);
h.put(emp2, emp2);
//}
System.out.println("----------------");
System.out.println("size of hashmap: "+h.size());
}
}

hashCode() :
If you only override the hash-code method nothing happens, because it always returns a new hashCode for each object as an Object class.
equals() :
If you only override the equals method, if a.equals(b) is true it means the hashCode of a and b must be the same but that does not happen since you did not override the hashCode method.
Note : hashCode() method of Object class always returns a new hashCode for each object.
So when you need to use your object in the hashing based collection, you must override both equals() and hashCode().

Java puts a rule that
"If two objects are equal using Object class equals method, then the hashcode method should give the same value for these two objects."
So, if in our class we override equals() we should override hashcode() method also to follow this rule.
Both methods, equals() and hashcode(), are used in Hashtable, for example, to store values as key-value pairs. If we override one and not the other, there is a possibility that the Hashtable may not work as we want, if we use such object as a key.

Adding to #Lombo 's answer
When will you need to override equals() ?
The default implementation of Object's equals() is
public boolean equals(Object obj) {
return (this == obj);
}
which means two objects will be considered equal only if they have the same memory address which will be true only if you are
comparing an object with itself.
But you might want to consider two objects the same if they have the same value for one
or more of their properties (Refer the example given in #Lombo 's answer).
So you will override equals() in these situations and you would give your own conditions for equality.
I have successfully implemented equals() and it is working great.So why are they asking to override hashCode() as well?
Well.As long as you don't use "Hash" based Collections on your user-defined class,it is fine.
But some time in the future you might want to use HashMap or HashSet and if you don't override and "correctly implement" hashCode(), these Hash based collection won't work as intended.
Override only equals (Addition to #Lombo 's answer)
myMap.put(first,someValue)
myMap.contains(second); --> But it should be the same since the key are the same.But returns false!!! How?
First of all,HashMap checks if the hashCode of second is the same as first.
Only if the values are the same,it will proceed to check the equality in the same bucket.
But here the hashCode is different for these 2 objects (because they have different memory address-from default implementation).
Hence it will not even care to check for equality.
If you have a breakpoint inside your overridden equals() method,it wouldn't step in if they have different hashCodes.
contains() checks hashCode() and only if they are the same it would call your equals() method.
Why can't we make the HashMap check for equality in all the buckets? So there is no necessity for me to override hashCode() !!
Then you are missing the point of Hash based Collections.
Consider the following :
Your hashCode() implementation : intObject%9.
The following are the keys stored in the form of buckets.
Bucket 1 : 1,10,19,... (in thousands)
Bucket 2 : 2,20,29...
Bucket 3 : 3,21,30,...
...
Say,you want to know if the map contains the key 10.
Would you want to search all the buckets? or Would you want to search only one bucket?
Based on the hashCode,you would identify that if 10 is present,it must be present in Bucket 1.
So only Bucket 1 will be searched !!

Because if you do not override them you will be use the default implentation in Object.
Given that instance equality and hascode values generally require knowledge of what makes up an object they generally will need to be redefined in your class to have any tangible meaning.

In order to use our own class objects as keys in collections like HashMap, Hashtable etc.. , we should override both methods ( hashCode() and equals() ) by having an awareness on internal working of collection. Otherwise, it leads to wrong results which we are not expected.

class A {
int i;
// Hashing Algorithm
if even number return 0 else return 1
// Equals Algorithm,
if i = this.i return true else false
}
put('key','value') will calculate the hash value using hashCode() to determine the
bucket and uses equals() method to find whether the value is already
present in the Bucket. If not it will added else it will be replaced with current value
get('key') will use hashCode() to find the Entry (bucket) first and
equals() to find the value in Entry
if Both are overridden,
Map<A>
Map.Entry 1 --> 1,3,5,...
Map.Entry 2 --> 2,4,6,...
if equals is not overridden
Map<A>
Map.Entry 1 --> 1,3,5,...,1,3,5,... // Duplicate values as equals not overridden
Map.Entry 2 --> 2,4,6,...,2,4,..
If hashCode is not overridden
Map<A>
Map.Entry 1 --> 1
Map.Entry 2 --> 2
Map.Entry 3 --> 3
Map.Entry 4 --> 1
Map.Entry 5 --> 2
Map.Entry 6 --> 3 // Same values are Stored in different hasCodes violates Contract 1
So on...
HashCode Equal Contract
Two keys equal according to equal method should generate same hashCode
Two Keys generating same hashCode need not be equal (In above example all even numbers generate same hash Code)

1) The common mistake is shown in the example below.
public class Car {
private String color;
public Car(String color) {
this.color = color;
}
public boolean equals(Object obj) {
if(obj==null) return false;
if (!(obj instanceof Car))
return false;
if (obj == this)
return true;
return this.color.equals(((Car) obj).color);
}
public static void main(String[] args) {
Car a1 = new Car("green");
Car a2 = new Car("red");
//hashMap stores Car type and its quantity
HashMap<Car, Integer> m = new HashMap<Car, Integer>();
m.put(a1, 10);
m.put(a2, 20);
System.out.println(m.get(new Car("green")));
}
}
the green Car is not found
2. Problem caused by hashCode()
The problem is caused by the un-overridden method hashCode(). The contract between equals() and hashCode() is:
If two objects are equal, then they must have the same hash code.
If two objects have the same hash code, they may or may not be equal.
public int hashCode(){
return this.color.hashCode();
}

It is useful when using Value Objects. The following is an excerpt from the Portland Pattern Repository:
Examples of value objects are things
like numbers, dates, monies and
strings. Usually, they are small
objects which are used quite widely.
Their identity is based on their state
rather than on their object identity.
This way, you can have multiple copies
of the same conceptual value object.
So I can have multiple copies of an
object that represents the date 16 Jan
1998. Any of these copies will be equal to each other. For a small
object such as this, it is often
easier to create new ones and move
them around rather than rely on a
single object to represent the date.
A value object should always override
.equals() in Java (or = in Smalltalk).
(Remember to override .hashCode() as
well.)

Assume you have class (A) that aggregates two other (B) (C), and you need to store instances of (A) inside hashtable. Default implementation only allows distinguishing of instances, but not by (B) and (C). So two instances of A could be equal, but default wouldn't allow you to compare them in correct way.

Consider collection of balls in a bucket all in black color. Your Job is to color those balls as follows and use it for appropriate game,
For Tennis - Yellow, Red.
For Cricket - White
Now bucket has balls in three colors Yellow, Red and White. And that now you did the coloring Only you know which color is for which game.
Coloring the balls - Hashing.
Choosing the ball for game - Equals.
If you did the coloring and some one chooses the ball for either cricket or tennis they wont mind the color!!!

I was looking into the explanation " If you only override hashCode then when you call myMap.put(first,someValue) it takes first, calculates its hashCode and stores it in a given bucket. Then when you call myMap.put(first,someOtherValue) it should replace first with second as per the Map Documentation because they are equal (according to our definition)." :
I think 2nd time when we are adding in myMap then it should be the 'second' object like myMap.put(second,someOtherValue)

The methods equals and hashcode are defined in the object class. By default if the equals method returns true, then the system will go further and check the value of the hash code. If the hash code of the 2 objects is also same only then the objects will be considered as same. So if you override only equals method, then even though the overridden equals method indicates 2 objects to be equal , the system defined hashcode may not indicate that the 2 objects are equal. So we need to override hash code as well.

Equals and Hashcode methods in Java
They are methods of java.lang.Object class which is the super class of all the classes (custom classes as well and others defined in java API).
Implementation:
public boolean equals(Object obj)
public int hashCode()
public boolean equals(Object obj)
This method simply checks if two object references x and y refer to the same object. i.e. It checks if x == y.
It is reflexive: for any reference value x, x.equals(x) should return true.
It is symmetric: for any reference values x and y, x.equals(y) should return true if and only if y.equals(x) returns true.
It is transitive: for any reference values x, y, and z, if x.equals(y) returns true and y.equals(z) returns true, then x.equals(z) should return true.
It is consistent: for any reference values x and y, multiple invocations of x.equals(y) consistently return true or consistently return false, provided no information used in equals comparisons on the object is modified.
For any non-null reference value x, x.equals(null) should return
false.
public int hashCode()
This method returns the hash code value for the object on which this method is invoked. This method returns the hash code value as an integer and is supported for the benefit of hashing based collection classes such as Hashtable, HashMap, HashSet etc. This method must be overridden in every class that overrides the equals method.
The general contract of hashCode is:
Whenever it is invoked on the same object more than once during an execution of a Java application, the hashCode method must consistently return the same integer, provided no information used in equals comparisons on the object is modified.
This integer need not remain consistent from one execution of an application to another execution of the same application.
If two objects are equal according to the equals(Object) method, then calling the hashCode method on each of the two objects must produce the same integer result.
It is not required that if two objects are unequal according to the equals(java.lang.Object) method, then calling the hashCode method on each of the two objects must produce distinct integer results. However, the programmer should be aware that producing distinct integer results for unequal objects may improve the performance of hashtables.
Equal objects must produce the same hash code as long as they are
equal, however unequal objects need not produce distinct hash codes.
Resources:
JavaRanch
Picture

If you override equals() and not hashcode(), you will not find any problem unless you or someone else uses that class type in a hashed collection like HashSet.
People before me have clearly explained the documented theory multiple times, I am just here to provide a very simple example.
Consider a class whose equals() need to mean something customized :-
public class Rishav {
private String rshv;
public Rishav(String rshv) {
this.rshv = rshv;
}
/**
* #return the rshv
*/
public String getRshv() {
return rshv;
}
/**
* #param rshv the rshv to set
*/
public void setRshv(String rshv) {
this.rshv = rshv;
}
#Override
public boolean equals(Object obj) {
if (obj instanceof Rishav) {
obj = (Rishav) obj;
if (this.rshv.equals(((Rishav) obj).getRshv())) {
return true;
} else {
return false;
}
} else {
return false;
}
}
#Override
public int hashCode() {
return rshv.hashCode();
}
}
Now consider this main class :-
import java.util.HashSet;
import java.util.Set;
public class TestRishav {
public static void main(String[] args) {
Rishav rA = new Rishav("rishav");
Rishav rB = new Rishav("rishav");
System.out.println(rA.equals(rB));
System.out.println("-----------------------------------");
Set<Rishav> hashed = new HashSet<>();
hashed.add(rA);
System.out.println(hashed.contains(rB));
System.out.println("-----------------------------------");
hashed.add(rB);
System.out.println(hashed.size());
}
}
This will yield the following output :-
true
-----------------------------------
true
-----------------------------------
1
I am happy with the results. But if I have not overridden hashCode(), it will cause nightmare as objects of Rishav with same member content will no longer be treated as unique as the hashCode will be different, as generated by default behavior, here's the would be output :-
true
-----------------------------------
false
-----------------------------------
2

In the example below, if you comment out the override for equals or hashcode in the Person class, this code will fail to look up Tom's order. Using the default implementation of hashcode can cause failures in hashtable lookups.
What I have below is a simplified code that pulls up people's order by Person. Person is being used as a key in the hashtable.
public class Person {
String name;
int age;
String socialSecurityNumber;
public Person(String name, int age, String socialSecurityNumber) {
this.name = name;
this.age = age;
this.socialSecurityNumber = socialSecurityNumber;
}
#Override
public boolean equals(Object p) {
//Person is same if social security number is same
if ((p instanceof Person) && this.socialSecurityNumber.equals(((Person) p).socialSecurityNumber)) {
return true;
} else {
return false;
}
}
#Override
public int hashCode() { //I am using a hashing function in String.java instead of writing my own.
return socialSecurityNumber.hashCode();
}
}
public class Order {
String[] items;
public void insertOrder(String[] items)
{
this.items=items;
}
}
import java.util.Hashtable;
public class Main {
public static void main(String[] args) {
Person p1=new Person("Tom",32,"548-56-4412");
Person p2=new Person("Jerry",60,"456-74-4125");
Person p3=new Person("Sherry",38,"418-55-1235");
Order order1=new Order();
order1.insertOrder(new String[]{"mouse","car charger"});
Order order2=new Order();
order2.insertOrder(new String[]{"Multi vitamin"});
Order order3=new Order();
order3.insertOrder(new String[]{"handbag", "iPod"});
Hashtable<Person,Order> hashtable=new Hashtable<Person,Order>();
hashtable.put(p1,order1);
hashtable.put(p2,order2);
hashtable.put(p3,order3);
//The line below will fail if Person class does not override hashCode()
Order tomOrder= hashtable.get(new Person("Tom", 32, "548-56-4412"));
for(String item:tomOrder.items)
{
System.out.println(item);
}
}
}

hashCode() method is used to get a unique integer for given object. This integer is used for determining the bucket location, when this object needs to be stored in some HashTable, HashMap like data structure. By default, Object’s hashCode() method returns and integer representation of memory address where object is stored.
The hashCode() method of objects is used when we insert them into a HashTable, HashMap or HashSet. More about HashTables on Wikipedia.org for reference.
To insert any entry in map data structure, we need both key and value. If both key and values are user define data types, the hashCode() of the key will be determine where to store the object internally. When require to lookup the object from the map also, the hash code of the key will be determine where to search for the object.
The hash code only points to a certain "area" (or list, bucket etc) internally. Since different key objects could potentially have the same hash code, the hash code itself is no guarantee that the right key is found. The HashTable then iterates this area (all keys with the same hash code) and uses the key's equals() method to find the right key. Once the right key is found, the object stored for that key is returned.
So, as we can see, a combination of the hashCode() and equals() methods are used when storing and when looking up objects in a HashTable.
NOTES:
Always use same attributes of an object to generate hashCode() and equals() both. As in our case, we have used employee id.
equals() must be consistent (if the objects are not modified, then it must keep returning the same value).
Whenever a.equals(b), then a.hashCode() must be same as b.hashCode().
If you override one, then you should override the other.
http://parameshk.blogspot.in/2014/10/examples-of-comparable-comporator.html

String class and wrapper classes have different implementation of equals() and hashCode() methods than Object class. equals() method of Object class compares the references of the objects, not the contents. hashCode() method of Object class returns distinct hashcode for every single object whether the contents are same.
It leads problem when you use Map collection and the key is of Persistent type, StringBuffer/builder type. Since they don't override equals() and hashCode() unlike String class, equals() will return false when you compare two different objects even though both have same contents. It will make the hashMap storing same content keys. Storing same content keys means it is violating the rule of Map because Map doesnt allow duplicate keys at all.
Therefore you override equals() as well as hashCode() methods in your class and provide the implementation(IDE can generate these methods) so that they work same as String's equals() and hashCode() and prevent same content keys.
You have to override hashCode() method along with equals() because equals() work according hashcode.
Moreover overriding hashCode() method along with equals() helps to intact the equals()-hashCode() contract: "If two objects are equal, then they must have the same hash code."
When do you need to write custom implementation for hashCode()?
As we know that internal working of HashMap is on principle of Hashing. There are certain buckets where entrysets get stored. You customize the hashCode() implementation according your requirement so that same category objects can be stored into same index.
when you store the values into Map collection using put(k,v)method, the internal implementation of put() is:
put(k, v){
hash(k);
index=hash & (n-1);
}
Means, it generates index and the index is generated based on the hashcode of particular key object. So make this method generate hashcode according your requirement because same hashcode entrysets will be stored into same bucket or index.
That's it!

IMHO, it's as per the rule says - If two objects are equal then they should have same hash, i.e., equal objects should produce equal hash values.
Given above, default equals() in Object is == which does comparison on the address, hashCode() returns the address in integer(hash on actual address) which is again distinct for distinct Object.
If you need to use the custom Objects in the Hash based collections, you need to override both equals() and hashCode(), example If I want to maintain the HashSet of the Employee Objects, if I don't use stronger hashCode and equals I may endup overriding the two different Employee Objects, this happen when I use the age as the hashCode(), however I should be using the unique value which can be the Employee ID.

To help you check for duplicate Objects, we need a custom equals and hashCode.
Since hashcode always returns a number its always fast to retrieve an object using a number rather than an alphabetic key. How will it do? Assume we created a new object by passing some value which is already available in some other object. Now the new object will return the same hash value as of another object because the value passed is same. Once the same hash value is returned, JVM will go to the same memory address every time and if in case there are more than one objects present for the same hash value it will use equals() method to identify the correct object.

When you want to store and retrieve your custom object as a key in Map, then you should always override equals and hashCode in your custom Object .
Eg:
Person p1 = new Person("A",23);
Person p2 = new Person("A",23);
HashMap map = new HashMap();
map.put(p1,"value 1");
map.put(p2,"value 2");
Here p1 & p2 will consider as only one object and map size will be only 1 because they are equal.

public class Employee {
private int empId;
private String empName;
public Employee(int empId, String empName) {
super();
this.empId = empId;
this.empName = empName;
}
public int getEmpId() {
return empId;
}
public void setEmpId(int empId) {
this.empId = empId;
}
public String getEmpName() {
return empName;
}
public void setEmpName(String empName) {
this.empName = empName;
}
#Override
public String toString() {
return "Employee [empId=" + empId + ", empName=" + empName + "]";
}
#Override
public int hashCode() {
return empId + empName.hashCode();
}
#Override
public boolean equals(Object obj) {
if (this == obj) {
return true;
}
if (!(this instanceof Employee)) {
return false;
}
Employee emp = (Employee) obj;
return this.getEmpId() == emp.getEmpId() && this.getEmpName().equals(emp.getEmpName());
}
}
Test Class
public class Test {
public static void main(String[] args) {
Employee emp1 = new Employee(101,"Manash");
Employee emp2 = new Employee(101,"Manash");
Employee emp3 = new Employee(103,"Ranjan");
System.out.println(emp1.hashCode());
System.out.println(emp2.hashCode());
System.out.println(emp1.equals(emp2));
System.out.println(emp1.equals(emp3));
}
}
In Object Class equals(Object obj) is used to compare address comparesion thats why when in Test class if you compare two objects then equals method giving false but when we override hashcode() the it can compare content and give proper result.

Both the methods are defined in Object class. And both are in its simplest implementation. So when you need you want add some more implementation to these methods then you have override in your class.
For Ex: equals() method in object only checks its equality on the reference. So if you need compare its state as well then you can override that as it is done in String class.

There's no mention in this answer of testing the equals/hashcode contract.
I've found the EqualsVerifier library to be very useful and comprehensive. It is also very easy to use.
Also, building equals() and hashCode() methods from scratch involves a lot of boilerplate code. The Apache Commons Lang library provides the EqualsBuilder and HashCodeBuilder classes. These classes greatly simplify implementing equals() and hashCode() methods for complex classes.
As an aside, it's worth considering overriding the toString() method to aid debugging. Apache Commons Lang library provides the ToStringBuilder class to help with this.

When we make hashcode of 2 objects to point to one address,why it is temporary?

Here Equals_to_operator is a Class and have a parameterized constructor public Equals_to_operator(int dd, int mm, int yy).
e and f are two object which calls the parameterized constructor with same argument.
I have overriden the hashCode and made both the hashCode of objects same.
Eventhough making the hashcode same(memory location of object same) it gives Output:not equals
I want to perform same by making hashcode same,where i am going wrong?
public class Equals_to_operator {
private int dd,mm,yy;
public Equals_to_operator(int dd, int mm, int yy) {
this.dd = dd;
this.mm = mm;
this.yy = yy;
}
#Override
public String toString() {
return "Equals_to_operator [dd=" + dd + ", mm=" + mm + ", yy=" + yy + "]";
}
public int hashCode() {
return 1;
}
public static void main(String[] args) {
Equals_to_operator e=new Equals_to_operator(7, 1, 2016);
System.out.println(e+"\n"+e.hashCode());
Equals_to_operator f=new Equals_to_operator(7, 1, 2016);
System.out.println(f+"\n"+f.hashCode());
if (e==f)
System.out.println("equals");
else
System.out.println("not equals");
}

You appear to have a fundamental misunderstanding over the way equals and hashCode interact. These two methods work in collaboration, not as substitutes for one another. Moreover, you seem to misunderstand the way these two methods interact with operator ==: they don't; operator == checks object identity, so in your program it will return false even if you properly override hashCode and equals.
You must always override both these methods in pairs, and call equals to check equality.
Returning the same hash code tells hash-based containers that your objects may be equal, thus triggering an additional call to equals; returning different hash codes allows hash containers to skip the call to equals.
Required reading: documentation for hashCode and equals.

Eventhough making the hashcode same(memory location of object same) it gives Output:not equals
Having same hashcode doesn't mean that objects are equal.
memory location of object same ... That's not what hashcode does. where from did you get that?
if (e==f)
It means that condition will be true iff both e and f are pointing to same object.
Based on your equals method, both the objects pointed by e and f are equal but == but checks reference equality not the contents.

== // checks equality in terms of memory address
something.equals(somethingElse) // enforces your own terms of what "equals" is if. If you wish to do this, override "equals()"
hashCode() // used when you're trying to use a collection such as a hashmap to map a key object to a value
You probably should look into the documentation for these items, but the difference between == and .equals() is something that you really need to understand.
EDIT: a side-note: If when you're looking more into hashCode() you read somewhere that the toString() representation of an Object by default (no overridden toString()) is a form of the memory address, that's a common misconception. It's actually the hashCode--but I digress.

In Java, Whenever we override equals method, do we need to override hashcode also? [duplicate]

Recently I read through this
Developer Works Document.
The document is all about defining hashCode() and equals() effectively and correctly, however I am not able to figure out why we need to override these two methods.
How can I take the decision to implement these methods efficiently?

Joshua Bloch says on Effective Java
You must override hashCode() in every class that overrides equals(). Failure to do so will result in a violation of the general contract for Object.hashCode(), which will prevent your class from functioning properly in conjunction with all hash-based collections, including HashMap, HashSet, and Hashtable.
Let's try to understand it with an example of what would happen if we override equals() without overriding hashCode() and attempt to use a Map.
Say we have a class like this and that two objects of MyClass are equal if their importantField is equal (with hashCode() and equals() generated by eclipse)
public class MyClass {
private final String importantField;
private final String anotherField;
public MyClass(final String equalField, final String anotherField) {
this.importantField = equalField;
this.anotherField = anotherField;
}
#Override
public int hashCode() {
final int prime = 31;
int result = 1;
result = prime * result
+ ((importantField == null) ? 0 : importantField.hashCode());
return result;
}
#Override
public boolean equals(final Object obj) {
if (this == obj)
return true;
if (obj == null)
return false;
if (getClass() != obj.getClass())
return false;
final MyClass other = (MyClass) obj;
if (importantField == null) {
if (other.importantField != null)
return false;
} else if (!importantField.equals(other.importantField))
return false;
return true;
}
}
Imagine you have this
MyClass first = new MyClass("a","first");
MyClass second = new MyClass("a","second");
Override only equals
If only equals is overriden, then when you call myMap.put(first,someValue) first will hash to some bucket and when you call myMap.put(second,someOtherValue) it will hash to some other bucket (as they have a different hashCode). So, although they are equal, as they don't hash to the same bucket, the map can't realize it and both of them stay in the map.
Although it is not necessary to override equals() if we override hashCode(), let's see what would happen in this particular case where we know that two objects of MyClass are equal if their importantField is equal but we do not override equals().
Override only hashCode
If you only override hashCode then when you call myMap.put(first,someValue) it takes first, calculates its hashCode and stores it in a given bucket. Then when you call myMap.put(second,someOtherValue) it should replace first with second as per the Map Documentation because they are equal (according to the business requirement).
But the problem is that equals was not redefined, so when the map hashes second and iterates through the bucket looking if there is an object k such that second.equals(k) is true it won't find any as second.equals(first) will be false.
Hope it was clear

Collections such as HashMap and HashSet use a hashcode value of an object to determine how it should be stored inside a collection, and the hashcode is used again in order to locate the object
in its collection.
Hashing retrieval is a two-step process:
Find the right bucket (using hashCode())
Search the bucket for the right element (using equals() )
Here is a small example on why we should overrride equals() and hashcode().
Consider an Employee class which has two fields: age and name.
public class Employee {
String name;
int age;
public Employee(String name, int age) {
this.name = name;
this.age = age;
}
public String getName() {
return name;
}
public void setName(String name) {
this.name = name;
}
public int getAge() {
return age;
}
public void setAge(int age) {
this.age = age;
}
#Override
public boolean equals(Object obj) {
if (obj == this)
return true;
if (!(obj instanceof Employee))
return false;
Employee employee = (Employee) obj;
return employee.getAge() == this.getAge()
&& employee.getName() == this.getName();
}
// commented
/* #Override
public int hashCode() {
int result=17;
result=31*result+age;
result=31*result+(name!=null ? name.hashCode():0);
return result;
}
*/
}
Now create a class, insert Employee object into a HashSet and test whether that object is present or not.
public class ClientTest {
public static void main(String[] args) {
Employee employee = new Employee("rajeev", 24);
Employee employee1 = new Employee("rajeev", 25);
Employee employee2 = new Employee("rajeev", 24);
HashSet<Employee> employees = new HashSet<Employee>();
employees.add(employee);
System.out.println(employees.contains(employee2));
System.out.println("employee.hashCode(): " + employee.hashCode()
+ " employee2.hashCode():" + employee2.hashCode());
}
}
It will print the following:
false
employee.hashCode(): 321755204 employee2.hashCode():375890482
Now uncomment hashcode() method , execute the same and the output would be:
true
employee.hashCode(): -938387308 employee2.hashCode():-938387308
Now can you see why if two objects are considered equal, their hashcodes must
also be equal? Otherwise, you'd never be able to find the object since the default
hashcode method in class Object virtually always comes up with a unique number
for each object, even if the equals() method is overridden in such a way that two
or more objects are considered equal. It doesn't matter how equal the objects are if
their hashcodes don't reflect that. So one more time: If two objects are equal, their
hashcodes must be equal as well.

You must override hashCode() in every
class that overrides equals(). Failure
to do so will result in a violation of
the general contract for
Object.hashCode(), which will prevent
your class from functioning properly
in conjunction with all hash-based
collections, including HashMap,
HashSet, and Hashtable.
   from Effective Java, by Joshua Bloch
By defining equals() and hashCode() consistently, you can improve the usability of your classes as keys in hash-based collections. As the API doc for hashCode explains: "This method is supported for the benefit of hashtables such as those provided by java.util.Hashtable."
The best answer to your question about how to implement these methods efficiently is suggesting you to read Chapter 3 of Effective Java.

Why we override equals() method
In Java we can not overload how operators like ==, +=, -+ behave. They are behaving a certain way. So let's focus on the operator == for our case here.
How operator == works.
It checks if 2 references that we compare point to the same instance in memory. Operator == will resolve to true only if those 2 references represent the same instance in memory.
So now let's consider the following example
public class Person {
private Integer age;
private String name;
..getters, setters, constructors
}
So let's say that in your program you have built 2 Person objects on different places and you wish to compare them.
Person person1 = new Person("Mike", 34);
Person person2 = new Person("Mike", 34);
System.out.println ( person1 == person2 ); --> will print false!
Those 2 objects from business perspective look the same right? For JVM they are not the same. Since they are both created with new keyword those instances are located in different segments in memory. Therefore the operator == will return false
But if we can not override the == operator how can we say to JVM that we want those 2 objects to be treated as same. There comes the .equals() method in play.
You can override equals() to check if some objects have same values for specific fields to be considered equal.
You can select which fields you want to be compared. If we say that 2 Person objects will be the same if and only if they have the same age and same name, then the IDE will create something like the following for automatic generation of equals()
#Override
public boolean equals(Object o) {
if (this == o) return true;
if (o == null || getClass() != o.getClass()) return false;
Person person = (Person) o;
return age == person.age &&
name.equals(person.name);
}
Let's go back to our previous example
Person person1 = new Person("Mike", 34);
Person person2 = new Person("Mike", 34);
System.out.println ( person1 == person2 ); --> will print false!
System.out.println ( person1.equals(person2) ); --> will print true!
So we can not overload == operator to compare objects the way we want but Java gave us another way, the equals() method, which we can override as we want.
Keep in mind however, if we don't provide our custom version of .equals() (aka override) in our class then the predefined .equals() from Object class and == operator will behave exactly the same.
Default equals() method which is inherited from Object will check whether both compared instances are the same in memory!
Why we override hashCode() method
Some Data Structures in java like HashSet, HashMap store their elements based on a hash function which is applied on those elements. The hashing function is the hashCode()
If we have a choice of overriding .equals() method then we must also have a choice of overriding hashCode() method. There is a reason for that.
Default implementation of hashCode() which is inherited from Object considers all objects in memory unique!
Let's get back to those hash data structures. There is a rule for those data structures.
HashSet can not contain duplicate values and HashMap can not contain duplicate keys
HashSet is implemented with a HashMap behind the scenes where each value of a HashSet is stored as a key in a HashMap.
So we have to understand how a HashMap works.
In a simple way a HashMap is a native array that has some buckets. Each bucket has a linkedList. In that linkedList our keys are stored. HashMap locates the correct linkedList for each key by applying hashCode() method and after that it iterates through all elements of that linkedList and applies equals() method on each of these elements to check if that element is already contained there. No duplicate keys are allowed.
When we put something inside a HashMap, the key is stored in one of those linkedLists. In which linkedList that key will be stored is shown by the result of hashCode() method on that key. So if key1.hashCode() has as a result 4, then that key1 will be stored on the 4th bucket of the array, in the linkedList that exists there.
By default hashCode() method returns a different result for each different instance. If we have the default equals() which behaves like == which considers all instances in memory as different objects we don't have any problem.
But in our previous example we said we want Person instances to be considered equal if their ages and names match.
Person person1 = new Person("Mike", 34);
Person person2 = new Person("Mike", 34);
System.out.println ( person1.equals(person2) ); --> will print true!
Now let's create a map to store those instances as keys with some string as pair value
Map<Person, String> map = new HashMap();
map.put(person1, "1");
map.put(person2, "2");
In Person class we have not overridden the hashCode method but we have overridden equals method. Since the default hashCode provides different results for different java instances person1.hashCode() and person2.hashCode() have big chances of having different results.
Our map might end with those persons in different linkedLists.
This is against the logic of a HashMap
A HashMap is not allowed to have multiple equal keys!
But ours now has and the reason is that the default hashCode() which was inherited from Object Class was not enough. Not after we have overridden the equals() method on Person Class.
That is the reason why we must override hashCode() method after we have overridden equals method.
Now let's fix that. Let's override our hashCode() method to consider the same fields that equals() considers, namely age, name
public class Person {
private Integer age;
private String name;
..getters, setters, constructors
#Override
public boolean equals(Object o) {
if (this == o) return true;
if (o == null || getClass() != o.getClass()) return false;
Person person = (Person) o;
return age == person.age &&
name.equals(person.name);
}
#Override
public int hashCode() {
return Objects.hash(name, age);
}
}
Now let's try again to save those keys in our HashMap
Map<Person, String> map = new HashMap();
map.put(person1, "1");
map.put(person2, "2");
person1.hashCode() and person2.hashCode() will definitely be the same. Let's say it is 0.
HashMap will go to bucket 0 and in that LinkedList will save the person1 as key with the value "1". For the second put HashMap is intelligent enough and when it goes again to bucket 0 to save person2 key with value "2" it will see that another equal key already exists there. So it will overwrite the previous key. So in the end only person2 key will exist in our HashMap.
Now we are aligned with the rule of Hash Map that says no multiple equal keys are allowed!

Identity is not equality.
equals operator == test identity.
equals(Object obj) method compares equality test(i.e. we need to tell equality by overriding the method)
Why do I need to override the equals and hashCode methods in Java?
First we have to understand the use of equals method.
In order to identity differences between two objects we need to override equals method.
For example:
Customer customer1=new Customer("peter");
Customer customer2=customer1;
customer1.equals(customer2); // returns true by JVM. i.e. both are refering same Object
------------------------------
Customer customer1=new Customer("peter");
Customer customer2=new Customer("peter");
customer1.equals(customer2); //return false by JVM i.e. we have two different peter customers.
------------------------------
Now I have overriden Customer class equals method as follows:
#Override
public boolean equals(Object obj) {
if (this == obj) // it checks references
return true;
if (obj == null) // checks null
return false;
if (getClass() != obj.getClass()) // both object are instances of same class or not
return false;
Customer other = (Customer) obj;
if (name == null) {
if (other.name != null)
return false;
} else if (!name.equals(other.name)) // it again using bulit in String object equals to identify the difference
return false;
return true;
}
Customer customer1=new Customer("peter");
Customer customer2=new Customer("peter");
Insteady identify the Object equality by JVM, we can do it by overring equals method.
customer1.equals(customer2); // returns true by our own logic
Now hashCode method can understand easily.
hashCode produces integer in order to store object in data structures like HashMap, HashSet.
Assume we have override equals method of Customer as above,
customer1.equals(customer2); // returns true by our own logic
While working with data structure when we store object in buckets(bucket is a fancy name for folder). If we use built-in hash technique, for above two customers it generates two different hashcode. So we are storing the same identical object in two different places. To avoid this kind of issues we should override the hashCode method also based on the following principles.
un-equal instances may have same hashcode.
equal instances should return same hashcode.

Simply put, the equals-method in Object check for reference equality, where as two instances of your class could still be semantically equal when the properties are equal. This is for instance important when putting your objects into a container that utilizes equals and hashcode, like HashMap and Set. Let's say we have a class like:
public class Foo {
String id;
String whatevs;
Foo(String id, String whatevs) {
this.id = id;
this.whatevs = whatevs;
}
}
We create two instances with the same id:
Foo a = new Foo("id", "something");
Foo b = new Foo("id", "something else");
Without overriding equals we are getting:
a.equals(b) is false because they are two different instances
a.equals(a) is true since it's the same instance
b.equals(b) is true since it's the same instance
Correct? Well maybe, if this is what you want. But let's say we want objects with the same id to be the same object, regardless if it's two different instances. We override the equals (and hashcode):
public class Foo {
String id;
String whatevs;
Foo(String id, String whatevs) {
this.id = id;
this.whatevs = whatevs;
}
#Override
public boolean equals(Object other) {
if (other instanceof Foo) {
return ((Foo)other).id.equals(this.id);
}
}
#Override
public int hashCode() {
return this.id.hashCode();
}
}
As for implementing equals and hashcode I can recommend using Guava's helper methods

Let me explain the concept in very simple words.
Firstly from a broader perspective we have collections, and hashmap is one of the datastructure in the collections.
To understand why we have to override the both equals and hashcode method, if need to first understand what is hashmap and what is does.
A hashmap is a datastructure which stores key value pairs of data in array fashion. Lets say a[], where each element in 'a' is a key value pair.
Also each index in the above array can be linked list thereby having more than one values at one index.
Now why is a hashmap used?
If we have to search among a large array then searching through each if them will not be efficient, so what hash technique tells us that lets pre process the array with some logic and group the elements based on that logic i.e. Hashing
EG: we have array 1,2,3,4,5,6,7,8,9,10,11 and we apply a hash function mod 10 so 1,11 will be grouped in together. So if we had to search for 11 in previous array then we would have to iterate the complete array but when we group it we limit our scope of iteration thereby improving speed. That datastructure used to store all the above information can be thought of as a 2d array for simplicity
Now apart from the above hashmap also tells that it wont add any Duplicates in it. And this is the main reason why we have to override the equals and hashcode
So when its said that explain the internal working of hashmap , we need to find what methods the hashmap has and how does it follow the above rules which i explained above
so the hashmap has method called as put(K,V) , and according to hashmap it should follow the above rules of efficiently distributing the array and not adding any duplicates
so what put does is that it will first generate the hashcode for the given key to decide which index the value should go in.if nothing is present at that index then the new value will be added over there, if something is already present over there then the new value should be added after the end of the linked list at that index. but remember no duplicates should be added as per the desired behavior of the hashmap. so lets say you have two Integer objects aa=11,bb=11.
As every object derived from the object class, the default implementation for comparing two objects is that it compares the reference and not values inside the object. So in the above case both though semantically equal will fail the equality test, and possibility that two objects which same hashcode and same values will exists thereby creating duplicates. If we override then we could avoid adding duplicates.
You could also refer to Detail working
import java.util.HashMap;
public class Employee {
String name;
String mobile;
public Employee(String name,String mobile) {
this.name = name;
this.mobile = mobile;
}
#Override
public int hashCode() {
System.out.println("calling hascode method of Employee");
String str = this.name;
int sum = 0;
for (int i = 0; i < str.length(); i++) {
sum = sum + str.charAt(i);
}
return sum;
}
#Override
public boolean equals(Object obj) {
// TODO Auto-generated method stub
System.out.println("calling equals method of Employee");
Employee emp = (Employee) obj;
if (this.mobile.equalsIgnoreCase(emp.mobile)) {
System.out.println("returning true");
return true;
} else {
System.out.println("returning false");
return false;
}
}
public static void main(String[] args) {
// TODO Auto-generated method stub
Employee emp = new Employee("abc", "hhh");
Employee emp2 = new Employee("abc", "hhh");
HashMap<Employee, Employee> h = new HashMap<>();
//for (int i = 0; i < 5; i++) {
h.put(emp, emp);
h.put(emp2, emp2);
//}
System.out.println("----------------");
System.out.println("size of hashmap: "+h.size());
}
}

hashCode() :
If you only override the hash-code method nothing happens, because it always returns a new hashCode for each object as an Object class.
equals() :
If you only override the equals method, if a.equals(b) is true it means the hashCode of a and b must be the same but that does not happen since you did not override the hashCode method.
Note : hashCode() method of Object class always returns a new hashCode for each object.
So when you need to use your object in the hashing based collection, you must override both equals() and hashCode().

Java puts a rule that
"If two objects are equal using Object class equals method, then the hashcode method should give the same value for these two objects."
So, if in our class we override equals() we should override hashcode() method also to follow this rule.
Both methods, equals() and hashcode(), are used in Hashtable, for example, to store values as key-value pairs. If we override one and not the other, there is a possibility that the Hashtable may not work as we want, if we use such object as a key.

Adding to #Lombo 's answer
When will you need to override equals() ?
The default implementation of Object's equals() is
public boolean equals(Object obj) {
return (this == obj);
}
which means two objects will be considered equal only if they have the same memory address which will be true only if you are
comparing an object with itself.
But you might want to consider two objects the same if they have the same value for one
or more of their properties (Refer the example given in #Lombo 's answer).
So you will override equals() in these situations and you would give your own conditions for equality.
I have successfully implemented equals() and it is working great.So why are they asking to override hashCode() as well?
Well.As long as you don't use "Hash" based Collections on your user-defined class,it is fine.
But some time in the future you might want to use HashMap or HashSet and if you don't override and "correctly implement" hashCode(), these Hash based collection won't work as intended.
Override only equals (Addition to #Lombo 's answer)
myMap.put(first,someValue)
myMap.contains(second); --> But it should be the same since the key are the same.But returns false!!! How?
First of all,HashMap checks if the hashCode of second is the same as first.
Only if the values are the same,it will proceed to check the equality in the same bucket.
But here the hashCode is different for these 2 objects (because they have different memory address-from default implementation).
Hence it will not even care to check for equality.
If you have a breakpoint inside your overridden equals() method,it wouldn't step in if they have different hashCodes.
contains() checks hashCode() and only if they are the same it would call your equals() method.
Why can't we make the HashMap check for equality in all the buckets? So there is no necessity for me to override hashCode() !!
Then you are missing the point of Hash based Collections.
Consider the following :
Your hashCode() implementation : intObject%9.
The following are the keys stored in the form of buckets.
Bucket 1 : 1,10,19,... (in thousands)
Bucket 2 : 2,20,29...
Bucket 3 : 3,21,30,...
...
Say,you want to know if the map contains the key 10.
Would you want to search all the buckets? or Would you want to search only one bucket?
Based on the hashCode,you would identify that if 10 is present,it must be present in Bucket 1.
So only Bucket 1 will be searched !!

Because if you do not override them you will be use the default implentation in Object.
Given that instance equality and hascode values generally require knowledge of what makes up an object they generally will need to be redefined in your class to have any tangible meaning.

In order to use our own class objects as keys in collections like HashMap, Hashtable etc.. , we should override both methods ( hashCode() and equals() ) by having an awareness on internal working of collection. Otherwise, it leads to wrong results which we are not expected.

class A {
int i;
// Hashing Algorithm
if even number return 0 else return 1
// Equals Algorithm,
if i = this.i return true else false
}
put('key','value') will calculate the hash value using hashCode() to determine the
bucket and uses equals() method to find whether the value is already
present in the Bucket. If not it will added else it will be replaced with current value
get('key') will use hashCode() to find the Entry (bucket) first and
equals() to find the value in Entry
if Both are overridden,
Map<A>
Map.Entry 1 --> 1,3,5,...
Map.Entry 2 --> 2,4,6,...
if equals is not overridden
Map<A>
Map.Entry 1 --> 1,3,5,...,1,3,5,... // Duplicate values as equals not overridden
Map.Entry 2 --> 2,4,6,...,2,4,..
If hashCode is not overridden
Map<A>
Map.Entry 1 --> 1
Map.Entry 2 --> 2
Map.Entry 3 --> 3
Map.Entry 4 --> 1
Map.Entry 5 --> 2
Map.Entry 6 --> 3 // Same values are Stored in different hasCodes violates Contract 1
So on...
HashCode Equal Contract
Two keys equal according to equal method should generate same hashCode
Two Keys generating same hashCode need not be equal (In above example all even numbers generate same hash Code)

1) The common mistake is shown in the example below.
public class Car {
private String color;
public Car(String color) {
this.color = color;
}
public boolean equals(Object obj) {
if(obj==null) return false;
if (!(obj instanceof Car))
return false;
if (obj == this)
return true;
return this.color.equals(((Car) obj).color);
}
public static void main(String[] args) {
Car a1 = new Car("green");
Car a2 = new Car("red");
//hashMap stores Car type and its quantity
HashMap<Car, Integer> m = new HashMap<Car, Integer>();
m.put(a1, 10);
m.put(a2, 20);
System.out.println(m.get(new Car("green")));
}
}
the green Car is not found
2. Problem caused by hashCode()
The problem is caused by the un-overridden method hashCode(). The contract between equals() and hashCode() is:
If two objects are equal, then they must have the same hash code.
If two objects have the same hash code, they may or may not be equal.
public int hashCode(){
return this.color.hashCode();
}

It is useful when using Value Objects. The following is an excerpt from the Portland Pattern Repository:
Examples of value objects are things
like numbers, dates, monies and
strings. Usually, they are small
objects which are used quite widely.
Their identity is based on their state
rather than on their object identity.
This way, you can have multiple copies
of the same conceptual value object.
So I can have multiple copies of an
object that represents the date 16 Jan
1998. Any of these copies will be equal to each other. For a small
object such as this, it is often
easier to create new ones and move
them around rather than rely on a
single object to represent the date.
A value object should always override
.equals() in Java (or = in Smalltalk).
(Remember to override .hashCode() as
well.)

Assume you have class (A) that aggregates two other (B) (C), and you need to store instances of (A) inside hashtable. Default implementation only allows distinguishing of instances, but not by (B) and (C). So two instances of A could be equal, but default wouldn't allow you to compare them in correct way.

Consider collection of balls in a bucket all in black color. Your Job is to color those balls as follows and use it for appropriate game,
For Tennis - Yellow, Red.
For Cricket - White
Now bucket has balls in three colors Yellow, Red and White. And that now you did the coloring Only you know which color is for which game.
Coloring the balls - Hashing.
Choosing the ball for game - Equals.
If you did the coloring and some one chooses the ball for either cricket or tennis they wont mind the color!!!

I was looking into the explanation " If you only override hashCode then when you call myMap.put(first,someValue) it takes first, calculates its hashCode and stores it in a given bucket. Then when you call myMap.put(first,someOtherValue) it should replace first with second as per the Map Documentation because they are equal (according to our definition)." :
I think 2nd time when we are adding in myMap then it should be the 'second' object like myMap.put(second,someOtherValue)

The methods equals and hashcode are defined in the object class. By default if the equals method returns true, then the system will go further and check the value of the hash code. If the hash code of the 2 objects is also same only then the objects will be considered as same. So if you override only equals method, then even though the overridden equals method indicates 2 objects to be equal , the system defined hashcode may not indicate that the 2 objects are equal. So we need to override hash code as well.

Equals and Hashcode methods in Java
They are methods of java.lang.Object class which is the super class of all the classes (custom classes as well and others defined in java API).
Implementation:
public boolean equals(Object obj)
public int hashCode()
public boolean equals(Object obj)
This method simply checks if two object references x and y refer to the same object. i.e. It checks if x == y.
It is reflexive: for any reference value x, x.equals(x) should return true.
It is symmetric: for any reference values x and y, x.equals(y) should return true if and only if y.equals(x) returns true.
It is transitive: for any reference values x, y, and z, if x.equals(y) returns true and y.equals(z) returns true, then x.equals(z) should return true.
It is consistent: for any reference values x and y, multiple invocations of x.equals(y) consistently return true or consistently return false, provided no information used in equals comparisons on the object is modified.
For any non-null reference value x, x.equals(null) should return
false.
public int hashCode()
This method returns the hash code value for the object on which this method is invoked. This method returns the hash code value as an integer and is supported for the benefit of hashing based collection classes such as Hashtable, HashMap, HashSet etc. This method must be overridden in every class that overrides the equals method.
The general contract of hashCode is:
Whenever it is invoked on the same object more than once during an execution of a Java application, the hashCode method must consistently return the same integer, provided no information used in equals comparisons on the object is modified.
This integer need not remain consistent from one execution of an application to another execution of the same application.
If two objects are equal according to the equals(Object) method, then calling the hashCode method on each of the two objects must produce the same integer result.
It is not required that if two objects are unequal according to the equals(java.lang.Object) method, then calling the hashCode method on each of the two objects must produce distinct integer results. However, the programmer should be aware that producing distinct integer results for unequal objects may improve the performance of hashtables.
Equal objects must produce the same hash code as long as they are
equal, however unequal objects need not produce distinct hash codes.
Resources:
JavaRanch
Picture

If you override equals() and not hashcode(), you will not find any problem unless you or someone else uses that class type in a hashed collection like HashSet.
People before me have clearly explained the documented theory multiple times, I am just here to provide a very simple example.
Consider a class whose equals() need to mean something customized :-
public class Rishav {
private String rshv;
public Rishav(String rshv) {
this.rshv = rshv;
}
/**
* #return the rshv
*/
public String getRshv() {
return rshv;
}
/**
* #param rshv the rshv to set
*/
public void setRshv(String rshv) {
this.rshv = rshv;
}
#Override
public boolean equals(Object obj) {
if (obj instanceof Rishav) {
obj = (Rishav) obj;
if (this.rshv.equals(((Rishav) obj).getRshv())) {
return true;
} else {
return false;
}
} else {
return false;
}
}
#Override
public int hashCode() {
return rshv.hashCode();
}
}
Now consider this main class :-
import java.util.HashSet;
import java.util.Set;
public class TestRishav {
public static void main(String[] args) {
Rishav rA = new Rishav("rishav");
Rishav rB = new Rishav("rishav");
System.out.println(rA.equals(rB));
System.out.println("-----------------------------------");
Set<Rishav> hashed = new HashSet<>();
hashed.add(rA);
System.out.println(hashed.contains(rB));
System.out.println("-----------------------------------");
hashed.add(rB);
System.out.println(hashed.size());
}
}
This will yield the following output :-
true
-----------------------------------
true
-----------------------------------
1
I am happy with the results. But if I have not overridden hashCode(), it will cause nightmare as objects of Rishav with same member content will no longer be treated as unique as the hashCode will be different, as generated by default behavior, here's the would be output :-
true
-----------------------------------
false
-----------------------------------
2

In the example below, if you comment out the override for equals or hashcode in the Person class, this code will fail to look up Tom's order. Using the default implementation of hashcode can cause failures in hashtable lookups.
What I have below is a simplified code that pulls up people's order by Person. Person is being used as a key in the hashtable.
public class Person {
String name;
int age;
String socialSecurityNumber;
public Person(String name, int age, String socialSecurityNumber) {
this.name = name;
this.age = age;
this.socialSecurityNumber = socialSecurityNumber;
}
#Override
public boolean equals(Object p) {
//Person is same if social security number is same
if ((p instanceof Person) && this.socialSecurityNumber.equals(((Person) p).socialSecurityNumber)) {
return true;
} else {
return false;
}
}
#Override
public int hashCode() { //I am using a hashing function in String.java instead of writing my own.
return socialSecurityNumber.hashCode();
}
}
public class Order {
String[] items;
public void insertOrder(String[] items)
{
this.items=items;
}
}
import java.util.Hashtable;
public class Main {
public static void main(String[] args) {
Person p1=new Person("Tom",32,"548-56-4412");
Person p2=new Person("Jerry",60,"456-74-4125");
Person p3=new Person("Sherry",38,"418-55-1235");
Order order1=new Order();
order1.insertOrder(new String[]{"mouse","car charger"});
Order order2=new Order();
order2.insertOrder(new String[]{"Multi vitamin"});
Order order3=new Order();
order3.insertOrder(new String[]{"handbag", "iPod"});
Hashtable<Person,Order> hashtable=new Hashtable<Person,Order>();
hashtable.put(p1,order1);
hashtable.put(p2,order2);
hashtable.put(p3,order3);
//The line below will fail if Person class does not override hashCode()
Order tomOrder= hashtable.get(new Person("Tom", 32, "548-56-4412"));
for(String item:tomOrder.items)
{
System.out.println(item);
}
}
}

hashCode() method is used to get a unique integer for given object. This integer is used for determining the bucket location, when this object needs to be stored in some HashTable, HashMap like data structure. By default, Object’s hashCode() method returns and integer representation of memory address where object is stored.
The hashCode() method of objects is used when we insert them into a HashTable, HashMap or HashSet. More about HashTables on Wikipedia.org for reference.
To insert any entry in map data structure, we need both key and value. If both key and values are user define data types, the hashCode() of the key will be determine where to store the object internally. When require to lookup the object from the map also, the hash code of the key will be determine where to search for the object.
The hash code only points to a certain "area" (or list, bucket etc) internally. Since different key objects could potentially have the same hash code, the hash code itself is no guarantee that the right key is found. The HashTable then iterates this area (all keys with the same hash code) and uses the key's equals() method to find the right key. Once the right key is found, the object stored for that key is returned.
So, as we can see, a combination of the hashCode() and equals() methods are used when storing and when looking up objects in a HashTable.
NOTES:
Always use same attributes of an object to generate hashCode() and equals() both. As in our case, we have used employee id.
equals() must be consistent (if the objects are not modified, then it must keep returning the same value).
Whenever a.equals(b), then a.hashCode() must be same as b.hashCode().
If you override one, then you should override the other.
http://parameshk.blogspot.in/2014/10/examples-of-comparable-comporator.html

String class and wrapper classes have different implementation of equals() and hashCode() methods than Object class. equals() method of Object class compares the references of the objects, not the contents. hashCode() method of Object class returns distinct hashcode for every single object whether the contents are same.
It leads problem when you use Map collection and the key is of Persistent type, StringBuffer/builder type. Since they don't override equals() and hashCode() unlike String class, equals() will return false when you compare two different objects even though both have same contents. It will make the hashMap storing same content keys. Storing same content keys means it is violating the rule of Map because Map doesnt allow duplicate keys at all.
Therefore you override equals() as well as hashCode() methods in your class and provide the implementation(IDE can generate these methods) so that they work same as String's equals() and hashCode() and prevent same content keys.
You have to override hashCode() method along with equals() because equals() work according hashcode.
Moreover overriding hashCode() method along with equals() helps to intact the equals()-hashCode() contract: "If two objects are equal, then they must have the same hash code."
When do you need to write custom implementation for hashCode()?
As we know that internal working of HashMap is on principle of Hashing. There are certain buckets where entrysets get stored. You customize the hashCode() implementation according your requirement so that same category objects can be stored into same index.
when you store the values into Map collection using put(k,v)method, the internal implementation of put() is:
put(k, v){
hash(k);
index=hash & (n-1);
}
Means, it generates index and the index is generated based on the hashcode of particular key object. So make this method generate hashcode according your requirement because same hashcode entrysets will be stored into same bucket or index.
That's it!

IMHO, it's as per the rule says - If two objects are equal then they should have same hash, i.e., equal objects should produce equal hash values.
Given above, default equals() in Object is == which does comparison on the address, hashCode() returns the address in integer(hash on actual address) which is again distinct for distinct Object.
If you need to use the custom Objects in the Hash based collections, you need to override both equals() and hashCode(), example If I want to maintain the HashSet of the Employee Objects, if I don't use stronger hashCode and equals I may endup overriding the two different Employee Objects, this happen when I use the age as the hashCode(), however I should be using the unique value which can be the Employee ID.

To help you check for duplicate Objects, we need a custom equals and hashCode.
Since hashcode always returns a number its always fast to retrieve an object using a number rather than an alphabetic key. How will it do? Assume we created a new object by passing some value which is already available in some other object. Now the new object will return the same hash value as of another object because the value passed is same. Once the same hash value is returned, JVM will go to the same memory address every time and if in case there are more than one objects present for the same hash value it will use equals() method to identify the correct object.

When you want to store and retrieve your custom object as a key in Map, then you should always override equals and hashCode in your custom Object .
Eg:
Person p1 = new Person("A",23);
Person p2 = new Person("A",23);
HashMap map = new HashMap();
map.put(p1,"value 1");
map.put(p2,"value 2");
Here p1 & p2 will consider as only one object and map size will be only 1 because they are equal.

public class Employee {
private int empId;
private String empName;
public Employee(int empId, String empName) {
super();
this.empId = empId;
this.empName = empName;
}
public int getEmpId() {
return empId;
}
public void setEmpId(int empId) {
this.empId = empId;
}
public String getEmpName() {
return empName;
}
public void setEmpName(String empName) {
this.empName = empName;
}
#Override
public String toString() {
return "Employee [empId=" + empId + ", empName=" + empName + "]";
}
#Override
public int hashCode() {
return empId + empName.hashCode();
}
#Override
public boolean equals(Object obj) {
if (this == obj) {
return true;
}
if (!(this instanceof Employee)) {
return false;
}
Employee emp = (Employee) obj;
return this.getEmpId() == emp.getEmpId() && this.getEmpName().equals(emp.getEmpName());
}
}
Test Class
public class Test {
public static void main(String[] args) {
Employee emp1 = new Employee(101,"Manash");
Employee emp2 = new Employee(101,"Manash");
Employee emp3 = new Employee(103,"Ranjan");
System.out.println(emp1.hashCode());
System.out.println(emp2.hashCode());
System.out.println(emp1.equals(emp2));
System.out.println(emp1.equals(emp3));
}
}
In Object Class equals(Object obj) is used to compare address comparesion thats why when in Test class if you compare two objects then equals method giving false but when we override hashcode() the it can compare content and give proper result.

Both the methods are defined in Object class. And both are in its simplest implementation. So when you need you want add some more implementation to these methods then you have override in your class.
For Ex: equals() method in object only checks its equality on the reference. So if you need compare its state as well then you can override that as it is done in String class.

There's no mention in this answer of testing the equals/hashcode contract.
I've found the EqualsVerifier library to be very useful and comprehensive. It is also very easy to use.
Also, building equals() and hashCode() methods from scratch involves a lot of boilerplate code. The Apache Commons Lang library provides the EqualsBuilder and HashCodeBuilder classes. These classes greatly simplify implementing equals() and hashCode() methods for complex classes.
As an aside, it's worth considering overriding the toString() method to aid debugging. Apache Commons Lang library provides the ToStringBuilder class to help with this.

Implement equals with Set

I have this class:
private static class ClassA{
int id;
String name;
public ClassA(int id, String name){
this.id= id;
this.name = name;
}
#Override
public boolean equals(Object o) {
return ((ClassA)o).name.equals(this.name);
}
}
Why this main is printing 2 elements if I am overwriting the method equals in ClassA to compare only the name?
public static void main(String[] args){
ClassA myObject = new ClassA(1, "testing 1 2 3");
ClassA myObject2 = new ClassA(2, "testing 1 2 3");
Set<ClassA> set = new HashSet<ClassA>();
set.add(myObject);
set.add(myObject2);
System.out.println(set.size()); //will print 2, but I want to be 1!
}
If I look into the Set Java documentation:
A collection that contains no duplicate elements. More formally, sets contain no pair of elements e1 and e2 such that e1.equals(e2), and at most one null element. As implied by its name, this interface models the mathematical set abstraction.
So apparently I only have to override equals, however I heard that I have also to override the hashcode, but why?

They have different hashes because you didn't override hashCode. This means they were put in two different buckets in the HashSet, so they never got compared with equals in the first place.
I would add
public int hashCode() {
return name.hashCode();
}
Notice id isn't used in the hashCode because it isn't used in equals either.
(P.S. I'd also like to point out the irony of having an id that isn't used in equals. That's just funny. Usually it's the other way around: the id is the only thing in equals!)

Because you didn't override hashCode() as well.
programmers should take note that any class that overrides the Object.equals method must also override the Object.hashCode method in order to satisfy the general contract for the Object.hashCode method. In particular, c1.equals(c2) implies that c1.hashCode()==c2.hashCode().
http://download.oracle.com/javase/6/docs/api/java/util/Collection.html
And:
The general contract of hashCode is:
Whenever it is invoked on the same object more than once during an execution of a Java application, the hashCode method must consistently return the same integer, provided no information used in equals comparisons on the object is modified. This integer need not remain consistent from one execution of an application to another execution of the same application.
If two objects are equal according to the equals(Object) method, then calling the hashCode method on each of the two objects must produce the same integer result.
It is not required that if two objects are unequal according to the equals(java.lang.Object) method, then calling the hashCode method on each of the two objects must produce distinct integer results. However, the programmer should be aware that producing distinct integer results for unequal objects may improve the performance of hashtables.
http://download.oracle.com/javase/6/docs/api/java/lang/Object.html#hashCode()

Why do I need to override the equals and hashCode methods in Java?

Recently I read through this
Developer Works Document.
The document is all about defining hashCode() and equals() effectively and correctly, however I am not able to figure out why we need to override these two methods.
How can I take the decision to implement these methods efficiently?

Joshua Bloch says on Effective Java
You must override hashCode() in every class that overrides equals(). Failure to do so will result in a violation of the general contract for Object.hashCode(), which will prevent your class from functioning properly in conjunction with all hash-based collections, including HashMap, HashSet, and Hashtable.
Let's try to understand it with an example of what would happen if we override equals() without overriding hashCode() and attempt to use a Map.
Say we have a class like this and that two objects of MyClass are equal if their importantField is equal (with hashCode() and equals() generated by eclipse)
public class MyClass {
private final String importantField;
private final String anotherField;
public MyClass(final String equalField, final String anotherField) {
this.importantField = equalField;
this.anotherField = anotherField;
}
#Override
public int hashCode() {
final int prime = 31;
int result = 1;
result = prime * result
+ ((importantField == null) ? 0 : importantField.hashCode());
return result;
}
#Override
public boolean equals(final Object obj) {
if (this == obj)
return true;
if (obj == null)
return false;
if (getClass() != obj.getClass())
return false;
final MyClass other = (MyClass) obj;
if (importantField == null) {
if (other.importantField != null)
return false;
} else if (!importantField.equals(other.importantField))
return false;
return true;
}
}
Imagine you have this
MyClass first = new MyClass("a","first");
MyClass second = new MyClass("a","second");
Override only equals
If only equals is overriden, then when you call myMap.put(first,someValue) first will hash to some bucket and when you call myMap.put(second,someOtherValue) it will hash to some other bucket (as they have a different hashCode). So, although they are equal, as they don't hash to the same bucket, the map can't realize it and both of them stay in the map.
Although it is not necessary to override equals() if we override hashCode(), let's see what would happen in this particular case where we know that two objects of MyClass are equal if their importantField is equal but we do not override equals().
Override only hashCode
If you only override hashCode then when you call myMap.put(first,someValue) it takes first, calculates its hashCode and stores it in a given bucket. Then when you call myMap.put(second,someOtherValue) it should replace first with second as per the Map Documentation because they are equal (according to the business requirement).
But the problem is that equals was not redefined, so when the map hashes second and iterates through the bucket looking if there is an object k such that second.equals(k) is true it won't find any as second.equals(first) will be false.
Hope it was clear

Collections such as HashMap and HashSet use a hashcode value of an object to determine how it should be stored inside a collection, and the hashcode is used again in order to locate the object
in its collection.
Hashing retrieval is a two-step process:
Find the right bucket (using hashCode())
Search the bucket for the right element (using equals() )
Here is a small example on why we should overrride equals() and hashcode().
Consider an Employee class which has two fields: age and name.
public class Employee {
String name;
int age;
public Employee(String name, int age) {
this.name = name;
this.age = age;
}
public String getName() {
return name;
}
public void setName(String name) {
this.name = name;
}
public int getAge() {
return age;
}
public void setAge(int age) {
this.age = age;
}
#Override
public boolean equals(Object obj) {
if (obj == this)
return true;
if (!(obj instanceof Employee))
return false;
Employee employee = (Employee) obj;
return employee.getAge() == this.getAge()
&& employee.getName() == this.getName();
}
// commented
/* #Override
public int hashCode() {
int result=17;
result=31*result+age;
result=31*result+(name!=null ? name.hashCode():0);
return result;
}
*/
}
Now create a class, insert Employee object into a HashSet and test whether that object is present or not.
public class ClientTest {
public static void main(String[] args) {
Employee employee = new Employee("rajeev", 24);
Employee employee1 = new Employee("rajeev", 25);
Employee employee2 = new Employee("rajeev", 24);
HashSet<Employee> employees = new HashSet<Employee>();
employees.add(employee);
System.out.println(employees.contains(employee2));
System.out.println("employee.hashCode(): " + employee.hashCode()
+ " employee2.hashCode():" + employee2.hashCode());
}
}
It will print the following:
false
employee.hashCode(): 321755204 employee2.hashCode():375890482
Now uncomment hashcode() method , execute the same and the output would be:
true
employee.hashCode(): -938387308 employee2.hashCode():-938387308
Now can you see why if two objects are considered equal, their hashcodes must
also be equal? Otherwise, you'd never be able to find the object since the default
hashcode method in class Object virtually always comes up with a unique number
for each object, even if the equals() method is overridden in such a way that two
or more objects are considered equal. It doesn't matter how equal the objects are if
their hashcodes don't reflect that. So one more time: If two objects are equal, their
hashcodes must be equal as well.

You must override hashCode() in every
class that overrides equals(). Failure
to do so will result in a violation of
the general contract for
Object.hashCode(), which will prevent
your class from functioning properly
in conjunction with all hash-based
collections, including HashMap,
HashSet, and Hashtable.
   from Effective Java, by Joshua Bloch
By defining equals() and hashCode() consistently, you can improve the usability of your classes as keys in hash-based collections. As the API doc for hashCode explains: "This method is supported for the benefit of hashtables such as those provided by java.util.Hashtable."
The best answer to your question about how to implement these methods efficiently is suggesting you to read Chapter 3 of Effective Java.

Why we override equals() method
In Java we can not overload how operators like ==, +=, -+ behave. They are behaving a certain way. So let's focus on the operator == for our case here.
How operator == works.
It checks if 2 references that we compare point to the same instance in memory. Operator == will resolve to true only if those 2 references represent the same instance in memory.
So now let's consider the following example
public class Person {
private Integer age;
private String name;
..getters, setters, constructors
}
So let's say that in your program you have built 2 Person objects on different places and you wish to compare them.
Person person1 = new Person("Mike", 34);
Person person2 = new Person("Mike", 34);
System.out.println ( person1 == person2 ); --> will print false!
Those 2 objects from business perspective look the same right? For JVM they are not the same. Since they are both created with new keyword those instances are located in different segments in memory. Therefore the operator == will return false
But if we can not override the == operator how can we say to JVM that we want those 2 objects to be treated as same. There comes the .equals() method in play.
You can override equals() to check if some objects have same values for specific fields to be considered equal.
You can select which fields you want to be compared. If we say that 2 Person objects will be the same if and only if they have the same age and same name, then the IDE will create something like the following for automatic generation of equals()
#Override
public boolean equals(Object o) {
if (this == o) return true;
if (o == null || getClass() != o.getClass()) return false;
Person person = (Person) o;
return age == person.age &&
name.equals(person.name);
}
Let's go back to our previous example
Person person1 = new Person("Mike", 34);
Person person2 = new Person("Mike", 34);
System.out.println ( person1 == person2 ); --> will print false!
System.out.println ( person1.equals(person2) ); --> will print true!
So we can not overload == operator to compare objects the way we want but Java gave us another way, the equals() method, which we can override as we want.
Keep in mind however, if we don't provide our custom version of .equals() (aka override) in our class then the predefined .equals() from Object class and == operator will behave exactly the same.
Default equals() method which is inherited from Object will check whether both compared instances are the same in memory!
Why we override hashCode() method
Some Data Structures in java like HashSet, HashMap store their elements based on a hash function which is applied on those elements. The hashing function is the hashCode()
If we have a choice of overriding .equals() method then we must also have a choice of overriding hashCode() method. There is a reason for that.
Default implementation of hashCode() which is inherited from Object considers all objects in memory unique!
Let's get back to those hash data structures. There is a rule for those data structures.
HashSet can not contain duplicate values and HashMap can not contain duplicate keys
HashSet is implemented with a HashMap behind the scenes where each value of a HashSet is stored as a key in a HashMap.
So we have to understand how a HashMap works.
In a simple way a HashMap is a native array that has some buckets. Each bucket has a linkedList. In that linkedList our keys are stored. HashMap locates the correct linkedList for each key by applying hashCode() method and after that it iterates through all elements of that linkedList and applies equals() method on each of these elements to check if that element is already contained there. No duplicate keys are allowed.
When we put something inside a HashMap, the key is stored in one of those linkedLists. In which linkedList that key will be stored is shown by the result of hashCode() method on that key. So if key1.hashCode() has as a result 4, then that key1 will be stored on the 4th bucket of the array, in the linkedList that exists there.
By default hashCode() method returns a different result for each different instance. If we have the default equals() which behaves like == which considers all instances in memory as different objects we don't have any problem.
But in our previous example we said we want Person instances to be considered equal if their ages and names match.
Person person1 = new Person("Mike", 34);
Person person2 = new Person("Mike", 34);
System.out.println ( person1.equals(person2) ); --> will print true!
Now let's create a map to store those instances as keys with some string as pair value
Map<Person, String> map = new HashMap();
map.put(person1, "1");
map.put(person2, "2");
In Person class we have not overridden the hashCode method but we have overridden equals method. Since the default hashCode provides different results for different java instances person1.hashCode() and person2.hashCode() have big chances of having different results.
Our map might end with those persons in different linkedLists.
This is against the logic of a HashMap
A HashMap is not allowed to have multiple equal keys!
But ours now has and the reason is that the default hashCode() which was inherited from Object Class was not enough. Not after we have overridden the equals() method on Person Class.
That is the reason why we must override hashCode() method after we have overridden equals method.
Now let's fix that. Let's override our hashCode() method to consider the same fields that equals() considers, namely age, name
public class Person {
private Integer age;
private String name;
..getters, setters, constructors
#Override
public boolean equals(Object o) {
if (this == o) return true;
if (o == null || getClass() != o.getClass()) return false;
Person person = (Person) o;
return age == person.age &&
name.equals(person.name);
}
#Override
public int hashCode() {
return Objects.hash(name, age);
}
}
Now let's try again to save those keys in our HashMap
Map<Person, String> map = new HashMap();
map.put(person1, "1");
map.put(person2, "2");
person1.hashCode() and person2.hashCode() will definitely be the same. Let's say it is 0.
HashMap will go to bucket 0 and in that LinkedList will save the person1 as key with the value "1". For the second put HashMap is intelligent enough and when it goes again to bucket 0 to save person2 key with value "2" it will see that another equal key already exists there. So it will overwrite the previous key. So in the end only person2 key will exist in our HashMap.
Now we are aligned with the rule of Hash Map that says no multiple equal keys are allowed!

Identity is not equality.
equals operator == test identity.
equals(Object obj) method compares equality test(i.e. we need to tell equality by overriding the method)
Why do I need to override the equals and hashCode methods in Java?
First we have to understand the use of equals method.
In order to identity differences between two objects we need to override equals method.
For example:
Customer customer1=new Customer("peter");
Customer customer2=customer1;
customer1.equals(customer2); // returns true by JVM. i.e. both are refering same Object
------------------------------
Customer customer1=new Customer("peter");
Customer customer2=new Customer("peter");
customer1.equals(customer2); //return false by JVM i.e. we have two different peter customers.
------------------------------
Now I have overriden Customer class equals method as follows:
#Override
public boolean equals(Object obj) {
if (this == obj) // it checks references
return true;
if (obj == null) // checks null
return false;
if (getClass() != obj.getClass()) // both object are instances of same class or not
return false;
Customer other = (Customer) obj;
if (name == null) {
if (other.name != null)
return false;
} else if (!name.equals(other.name)) // it again using bulit in String object equals to identify the difference
return false;
return true;
}
Customer customer1=new Customer("peter");
Customer customer2=new Customer("peter");
Insteady identify the Object equality by JVM, we can do it by overring equals method.
customer1.equals(customer2); // returns true by our own logic
Now hashCode method can understand easily.
hashCode produces integer in order to store object in data structures like HashMap, HashSet.
Assume we have override equals method of Customer as above,
customer1.equals(customer2); // returns true by our own logic
While working with data structure when we store object in buckets(bucket is a fancy name for folder). If we use built-in hash technique, for above two customers it generates two different hashcode. So we are storing the same identical object in two different places. To avoid this kind of issues we should override the hashCode method also based on the following principles.
un-equal instances may have same hashcode.
equal instances should return same hashcode.

Simply put, the equals-method in Object check for reference equality, where as two instances of your class could still be semantically equal when the properties are equal. This is for instance important when putting your objects into a container that utilizes equals and hashcode, like HashMap and Set. Let's say we have a class like:
public class Foo {
String id;
String whatevs;
Foo(String id, String whatevs) {
this.id = id;
this.whatevs = whatevs;
}
}
We create two instances with the same id:
Foo a = new Foo("id", "something");
Foo b = new Foo("id", "something else");
Without overriding equals we are getting:
a.equals(b) is false because they are two different instances
a.equals(a) is true since it's the same instance
b.equals(b) is true since it's the same instance
Correct? Well maybe, if this is what you want. But let's say we want objects with the same id to be the same object, regardless if it's two different instances. We override the equals (and hashcode):
public class Foo {
String id;
String whatevs;
Foo(String id, String whatevs) {
this.id = id;
this.whatevs = whatevs;
}
#Override
public boolean equals(Object other) {
if (other instanceof Foo) {
return ((Foo)other).id.equals(this.id);
}
}
#Override
public int hashCode() {
return this.id.hashCode();
}
}
As for implementing equals and hashcode I can recommend using Guava's helper methods

Let me explain the concept in very simple words.
Firstly from a broader perspective we have collections, and hashmap is one of the datastructure in the collections.
To understand why we have to override the both equals and hashcode method, if need to first understand what is hashmap and what is does.
A hashmap is a datastructure which stores key value pairs of data in array fashion. Lets say a[], where each element in 'a' is a key value pair.
Also each index in the above array can be linked list thereby having more than one values at one index.
Now why is a hashmap used?
If we have to search among a large array then searching through each if them will not be efficient, so what hash technique tells us that lets pre process the array with some logic and group the elements based on that logic i.e. Hashing
EG: we have array 1,2,3,4,5,6,7,8,9,10,11 and we apply a hash function mod 10 so 1,11 will be grouped in together. So if we had to search for 11 in previous array then we would have to iterate the complete array but when we group it we limit our scope of iteration thereby improving speed. That datastructure used to store all the above information can be thought of as a 2d array for simplicity
Now apart from the above hashmap also tells that it wont add any Duplicates in it. And this is the main reason why we have to override the equals and hashcode
So when its said that explain the internal working of hashmap , we need to find what methods the hashmap has and how does it follow the above rules which i explained above
so the hashmap has method called as put(K,V) , and according to hashmap it should follow the above rules of efficiently distributing the array and not adding any duplicates
so what put does is that it will first generate the hashcode for the given key to decide which index the value should go in.if nothing is present at that index then the new value will be added over there, if something is already present over there then the new value should be added after the end of the linked list at that index. but remember no duplicates should be added as per the desired behavior of the hashmap. so lets say you have two Integer objects aa=11,bb=11.
As every object derived from the object class, the default implementation for comparing two objects is that it compares the reference and not values inside the object. So in the above case both though semantically equal will fail the equality test, and possibility that two objects which same hashcode and same values will exists thereby creating duplicates. If we override then we could avoid adding duplicates.
You could also refer to Detail working
import java.util.HashMap;
public class Employee {
String name;
String mobile;
public Employee(String name,String mobile) {
this.name = name;
this.mobile = mobile;
}
#Override
public int hashCode() {
System.out.println("calling hascode method of Employee");
String str = this.name;
int sum = 0;
for (int i = 0; i < str.length(); i++) {
sum = sum + str.charAt(i);
}
return sum;
}
#Override
public boolean equals(Object obj) {
// TODO Auto-generated method stub
System.out.println("calling equals method of Employee");
Employee emp = (Employee) obj;
if (this.mobile.equalsIgnoreCase(emp.mobile)) {
System.out.println("returning true");
return true;
} else {
System.out.println("returning false");
return false;
}
}
public static void main(String[] args) {
// TODO Auto-generated method stub
Employee emp = new Employee("abc", "hhh");
Employee emp2 = new Employee("abc", "hhh");
HashMap<Employee, Employee> h = new HashMap<>();
//for (int i = 0; i < 5; i++) {
h.put(emp, emp);
h.put(emp2, emp2);
//}
System.out.println("----------------");
System.out.println("size of hashmap: "+h.size());
}
}

hashCode() :
If you only override the hash-code method nothing happens, because it always returns a new hashCode for each object as an Object class.
equals() :
If you only override the equals method, if a.equals(b) is true it means the hashCode of a and b must be the same but that does not happen since you did not override the hashCode method.
Note : hashCode() method of Object class always returns a new hashCode for each object.
So when you need to use your object in the hashing based collection, you must override both equals() and hashCode().

Java puts a rule that
"If two objects are equal using Object class equals method, then the hashcode method should give the same value for these two objects."
So, if in our class we override equals() we should override hashcode() method also to follow this rule.
Both methods, equals() and hashcode(), are used in Hashtable, for example, to store values as key-value pairs. If we override one and not the other, there is a possibility that the Hashtable may not work as we want, if we use such object as a key.

Adding to #Lombo 's answer
When will you need to override equals() ?
The default implementation of Object's equals() is
public boolean equals(Object obj) {
return (this == obj);
}
which means two objects will be considered equal only if they have the same memory address which will be true only if you are
comparing an object with itself.
But you might want to consider two objects the same if they have the same value for one
or more of their properties (Refer the example given in #Lombo 's answer).
So you will override equals() in these situations and you would give your own conditions for equality.
I have successfully implemented equals() and it is working great.So why are they asking to override hashCode() as well?
Well.As long as you don't use "Hash" based Collections on your user-defined class,it is fine.
But some time in the future you might want to use HashMap or HashSet and if you don't override and "correctly implement" hashCode(), these Hash based collection won't work as intended.
Override only equals (Addition to #Lombo 's answer)
myMap.put(first,someValue)
myMap.contains(second); --> But it should be the same since the key are the same.But returns false!!! How?
First of all,HashMap checks if the hashCode of second is the same as first.
Only if the values are the same,it will proceed to check the equality in the same bucket.
But here the hashCode is different for these 2 objects (because they have different memory address-from default implementation).
Hence it will not even care to check for equality.
If you have a breakpoint inside your overridden equals() method,it wouldn't step in if they have different hashCodes.
contains() checks hashCode() and only if they are the same it would call your equals() method.
Why can't we make the HashMap check for equality in all the buckets? So there is no necessity for me to override hashCode() !!
Then you are missing the point of Hash based Collections.
Consider the following :
Your hashCode() implementation : intObject%9.
The following are the keys stored in the form of buckets.
Bucket 1 : 1,10,19,... (in thousands)
Bucket 2 : 2,20,29...
Bucket 3 : 3,21,30,...
...
Say,you want to know if the map contains the key 10.
Would you want to search all the buckets? or Would you want to search only one bucket?
Based on the hashCode,you would identify that if 10 is present,it must be present in Bucket 1.
So only Bucket 1 will be searched !!

Because if you do not override them you will be use the default implentation in Object.
Given that instance equality and hascode values generally require knowledge of what makes up an object they generally will need to be redefined in your class to have any tangible meaning.

In order to use our own class objects as keys in collections like HashMap, Hashtable etc.. , we should override both methods ( hashCode() and equals() ) by having an awareness on internal working of collection. Otherwise, it leads to wrong results which we are not expected.

class A {
int i;
// Hashing Algorithm
if even number return 0 else return 1
// Equals Algorithm,
if i = this.i return true else false
}
put('key','value') will calculate the hash value using hashCode() to determine the
bucket and uses equals() method to find whether the value is already
present in the Bucket. If not it will added else it will be replaced with current value
get('key') will use hashCode() to find the Entry (bucket) first and
equals() to find the value in Entry
if Both are overridden,
Map<A>
Map.Entry 1 --> 1,3,5,...
Map.Entry 2 --> 2,4,6,...
if equals is not overridden
Map<A>
Map.Entry 1 --> 1,3,5,...,1,3,5,... // Duplicate values as equals not overridden
Map.Entry 2 --> 2,4,6,...,2,4,..
If hashCode is not overridden
Map<A>
Map.Entry 1 --> 1
Map.Entry 2 --> 2
Map.Entry 3 --> 3
Map.Entry 4 --> 1
Map.Entry 5 --> 2
Map.Entry 6 --> 3 // Same values are Stored in different hasCodes violates Contract 1
So on...
HashCode Equal Contract
Two keys equal according to equal method should generate same hashCode
Two Keys generating same hashCode need not be equal (In above example all even numbers generate same hash Code)

1) The common mistake is shown in the example below.
public class Car {
private String color;
public Car(String color) {
this.color = color;
}
public boolean equals(Object obj) {
if(obj==null) return false;
if (!(obj instanceof Car))
return false;
if (obj == this)
return true;
return this.color.equals(((Car) obj).color);
}
public static void main(String[] args) {
Car a1 = new Car("green");
Car a2 = new Car("red");
//hashMap stores Car type and its quantity
HashMap<Car, Integer> m = new HashMap<Car, Integer>();
m.put(a1, 10);
m.put(a2, 20);
System.out.println(m.get(new Car("green")));
}
}
the green Car is not found
2. Problem caused by hashCode()
The problem is caused by the un-overridden method hashCode(). The contract between equals() and hashCode() is:
If two objects are equal, then they must have the same hash code.
If two objects have the same hash code, they may or may not be equal.
public int hashCode(){
return this.color.hashCode();
}

It is useful when using Value Objects. The following is an excerpt from the Portland Pattern Repository:
Examples of value objects are things
like numbers, dates, monies and
strings. Usually, they are small
objects which are used quite widely.
Their identity is based on their state
rather than on their object identity.
This way, you can have multiple copies
of the same conceptual value object.
So I can have multiple copies of an
object that represents the date 16 Jan
1998. Any of these copies will be equal to each other. For a small
object such as this, it is often
easier to create new ones and move
them around rather than rely on a
single object to represent the date.
A value object should always override
.equals() in Java (or = in Smalltalk).
(Remember to override .hashCode() as
well.)

Assume you have class (A) that aggregates two other (B) (C), and you need to store instances of (A) inside hashtable. Default implementation only allows distinguishing of instances, but not by (B) and (C). So two instances of A could be equal, but default wouldn't allow you to compare them in correct way.

Consider collection of balls in a bucket all in black color. Your Job is to color those balls as follows and use it for appropriate game,
For Tennis - Yellow, Red.
For Cricket - White
Now bucket has balls in three colors Yellow, Red and White. And that now you did the coloring Only you know which color is for which game.
Coloring the balls - Hashing.
Choosing the ball for game - Equals.
If you did the coloring and some one chooses the ball for either cricket or tennis they wont mind the color!!!

I was looking into the explanation " If you only override hashCode then when you call myMap.put(first,someValue) it takes first, calculates its hashCode and stores it in a given bucket. Then when you call myMap.put(first,someOtherValue) it should replace first with second as per the Map Documentation because they are equal (according to our definition)." :
I think 2nd time when we are adding in myMap then it should be the 'second' object like myMap.put(second,someOtherValue)

The methods equals and hashcode are defined in the object class. By default if the equals method returns true, then the system will go further and check the value of the hash code. If the hash code of the 2 objects is also same only then the objects will be considered as same. So if you override only equals method, then even though the overridden equals method indicates 2 objects to be equal , the system defined hashcode may not indicate that the 2 objects are equal. So we need to override hash code as well.

Equals and Hashcode methods in Java
They are methods of java.lang.Object class which is the super class of all the classes (custom classes as well and others defined in java API).
Implementation:
public boolean equals(Object obj)
public int hashCode()
public boolean equals(Object obj)
This method simply checks if two object references x and y refer to the same object. i.e. It checks if x == y.
It is reflexive: for any reference value x, x.equals(x) should return true.
It is symmetric: for any reference values x and y, x.equals(y) should return true if and only if y.equals(x) returns true.
It is transitive: for any reference values x, y, and z, if x.equals(y) returns true and y.equals(z) returns true, then x.equals(z) should return true.
It is consistent: for any reference values x and y, multiple invocations of x.equals(y) consistently return true or consistently return false, provided no information used in equals comparisons on the object is modified.
For any non-null reference value x, x.equals(null) should return
false.
public int hashCode()
This method returns the hash code value for the object on which this method is invoked. This method returns the hash code value as an integer and is supported for the benefit of hashing based collection classes such as Hashtable, HashMap, HashSet etc. This method must be overridden in every class that overrides the equals method.
The general contract of hashCode is:
Whenever it is invoked on the same object more than once during an execution of a Java application, the hashCode method must consistently return the same integer, provided no information used in equals comparisons on the object is modified.
This integer need not remain consistent from one execution of an application to another execution of the same application.
If two objects are equal according to the equals(Object) method, then calling the hashCode method on each of the two objects must produce the same integer result.
It is not required that if two objects are unequal according to the equals(java.lang.Object) method, then calling the hashCode method on each of the two objects must produce distinct integer results. However, the programmer should be aware that producing distinct integer results for unequal objects may improve the performance of hashtables.
Equal objects must produce the same hash code as long as they are
equal, however unequal objects need not produce distinct hash codes.
Resources:
JavaRanch
Picture

If you override equals() and not hashcode(), you will not find any problem unless you or someone else uses that class type in a hashed collection like HashSet.
People before me have clearly explained the documented theory multiple times, I am just here to provide a very simple example.
Consider a class whose equals() need to mean something customized :-
public class Rishav {
private String rshv;
public Rishav(String rshv) {
this.rshv = rshv;
}
/**
* #return the rshv
*/
public String getRshv() {
return rshv;
}
/**
* #param rshv the rshv to set
*/
public void setRshv(String rshv) {
this.rshv = rshv;
}
#Override
public boolean equals(Object obj) {
if (obj instanceof Rishav) {
obj = (Rishav) obj;
if (this.rshv.equals(((Rishav) obj).getRshv())) {
return true;
} else {
return false;
}
} else {
return false;
}
}
#Override
public int hashCode() {
return rshv.hashCode();
}
}
Now consider this main class :-
import java.util.HashSet;
import java.util.Set;
public class TestRishav {
public static void main(String[] args) {
Rishav rA = new Rishav("rishav");
Rishav rB = new Rishav("rishav");
System.out.println(rA.equals(rB));
System.out.println("-----------------------------------");
Set<Rishav> hashed = new HashSet<>();
hashed.add(rA);
System.out.println(hashed.contains(rB));
System.out.println("-----------------------------------");
hashed.add(rB);
System.out.println(hashed.size());
}
}
This will yield the following output :-
true
-----------------------------------
true
-----------------------------------
1
I am happy with the results. But if I have not overridden hashCode(), it will cause nightmare as objects of Rishav with same member content will no longer be treated as unique as the hashCode will be different, as generated by default behavior, here's the would be output :-
true
-----------------------------------
false
-----------------------------------
2

In the example below, if you comment out the override for equals or hashcode in the Person class, this code will fail to look up Tom's order. Using the default implementation of hashcode can cause failures in hashtable lookups.
What I have below is a simplified code that pulls up people's order by Person. Person is being used as a key in the hashtable.
public class Person {
String name;
int age;
String socialSecurityNumber;
public Person(String name, int age, String socialSecurityNumber) {
this.name = name;
this.age = age;
this.socialSecurityNumber = socialSecurityNumber;
}
#Override
public boolean equals(Object p) {
//Person is same if social security number is same
if ((p instanceof Person) && this.socialSecurityNumber.equals(((Person) p).socialSecurityNumber)) {
return true;
} else {
return false;
}
}
#Override
public int hashCode() { //I am using a hashing function in String.java instead of writing my own.
return socialSecurityNumber.hashCode();
}
}
public class Order {
String[] items;
public void insertOrder(String[] items)
{
this.items=items;
}
}
import java.util.Hashtable;
public class Main {
public static void main(String[] args) {
Person p1=new Person("Tom",32,"548-56-4412");
Person p2=new Person("Jerry",60,"456-74-4125");
Person p3=new Person("Sherry",38,"418-55-1235");
Order order1=new Order();
order1.insertOrder(new String[]{"mouse","car charger"});
Order order2=new Order();
order2.insertOrder(new String[]{"Multi vitamin"});
Order order3=new Order();
order3.insertOrder(new String[]{"handbag", "iPod"});
Hashtable<Person,Order> hashtable=new Hashtable<Person,Order>();
hashtable.put(p1,order1);
hashtable.put(p2,order2);
hashtable.put(p3,order3);
//The line below will fail if Person class does not override hashCode()
Order tomOrder= hashtable.get(new Person("Tom", 32, "548-56-4412"));
for(String item:tomOrder.items)
{
System.out.println(item);
}
}
}

hashCode() method is used to get a unique integer for given object. This integer is used for determining the bucket location, when this object needs to be stored in some HashTable, HashMap like data structure. By default, Object’s hashCode() method returns and integer representation of memory address where object is stored.
The hashCode() method of objects is used when we insert them into a HashTable, HashMap or HashSet. More about HashTables on Wikipedia.org for reference.
To insert any entry in map data structure, we need both key and value. If both key and values are user define data types, the hashCode() of the key will be determine where to store the object internally. When require to lookup the object from the map also, the hash code of the key will be determine where to search for the object.
The hash code only points to a certain "area" (or list, bucket etc) internally. Since different key objects could potentially have the same hash code, the hash code itself is no guarantee that the right key is found. The HashTable then iterates this area (all keys with the same hash code) and uses the key's equals() method to find the right key. Once the right key is found, the object stored for that key is returned.
So, as we can see, a combination of the hashCode() and equals() methods are used when storing and when looking up objects in a HashTable.
NOTES:
Always use same attributes of an object to generate hashCode() and equals() both. As in our case, we have used employee id.
equals() must be consistent (if the objects are not modified, then it must keep returning the same value).
Whenever a.equals(b), then a.hashCode() must be same as b.hashCode().
If you override one, then you should override the other.
http://parameshk.blogspot.in/2014/10/examples-of-comparable-comporator.html

String class and wrapper classes have different implementation of equals() and hashCode() methods than Object class. equals() method of Object class compares the references of the objects, not the contents. hashCode() method of Object class returns distinct hashcode for every single object whether the contents are same.
It leads problem when you use Map collection and the key is of Persistent type, StringBuffer/builder type. Since they don't override equals() and hashCode() unlike String class, equals() will return false when you compare two different objects even though both have same contents. It will make the hashMap storing same content keys. Storing same content keys means it is violating the rule of Map because Map doesnt allow duplicate keys at all.
Therefore you override equals() as well as hashCode() methods in your class and provide the implementation(IDE can generate these methods) so that they work same as String's equals() and hashCode() and prevent same content keys.
You have to override hashCode() method along with equals() because equals() work according hashcode.
Moreover overriding hashCode() method along with equals() helps to intact the equals()-hashCode() contract: "If two objects are equal, then they must have the same hash code."
When do you need to write custom implementation for hashCode()?
As we know that internal working of HashMap is on principle of Hashing. There are certain buckets where entrysets get stored. You customize the hashCode() implementation according your requirement so that same category objects can be stored into same index.
when you store the values into Map collection using put(k,v)method, the internal implementation of put() is:
put(k, v){
hash(k);
index=hash & (n-1);
}
Means, it generates index and the index is generated based on the hashcode of particular key object. So make this method generate hashcode according your requirement because same hashcode entrysets will be stored into same bucket or index.
That's it!

IMHO, it's as per the rule says - If two objects are equal then they should have same hash, i.e., equal objects should produce equal hash values.
Given above, default equals() in Object is == which does comparison on the address, hashCode() returns the address in integer(hash on actual address) which is again distinct for distinct Object.
If you need to use the custom Objects in the Hash based collections, you need to override both equals() and hashCode(), example If I want to maintain the HashSet of the Employee Objects, if I don't use stronger hashCode and equals I may endup overriding the two different Employee Objects, this happen when I use the age as the hashCode(), however I should be using the unique value which can be the Employee ID.

To help you check for duplicate Objects, we need a custom equals and hashCode.
Since hashcode always returns a number its always fast to retrieve an object using a number rather than an alphabetic key. How will it do? Assume we created a new object by passing some value which is already available in some other object. Now the new object will return the same hash value as of another object because the value passed is same. Once the same hash value is returned, JVM will go to the same memory address every time and if in case there are more than one objects present for the same hash value it will use equals() method to identify the correct object.

When you want to store and retrieve your custom object as a key in Map, then you should always override equals and hashCode in your custom Object .
Eg:
Person p1 = new Person("A",23);
Person p2 = new Person("A",23);
HashMap map = new HashMap();
map.put(p1,"value 1");
map.put(p2,"value 2");
Here p1 & p2 will consider as only one object and map size will be only 1 because they are equal.

public class Employee {
private int empId;
private String empName;
public Employee(int empId, String empName) {
super();
this.empId = empId;
this.empName = empName;
}
public int getEmpId() {
return empId;
}
public void setEmpId(int empId) {
this.empId = empId;
}
public String getEmpName() {
return empName;
}
public void setEmpName(String empName) {
this.empName = empName;
}
#Override
public String toString() {
return "Employee [empId=" + empId + ", empName=" + empName + "]";
}
#Override
public int hashCode() {
return empId + empName.hashCode();
}
#Override
public boolean equals(Object obj) {
if (this == obj) {
return true;
}
if (!(this instanceof Employee)) {
return false;
}
Employee emp = (Employee) obj;
return this.getEmpId() == emp.getEmpId() && this.getEmpName().equals(emp.getEmpName());
}
}
Test Class
public class Test {
public static void main(String[] args) {
Employee emp1 = new Employee(101,"Manash");
Employee emp2 = new Employee(101,"Manash");
Employee emp3 = new Employee(103,"Ranjan");
System.out.println(emp1.hashCode());
System.out.println(emp2.hashCode());
System.out.println(emp1.equals(emp2));
System.out.println(emp1.equals(emp3));
}
}
In Object Class equals(Object obj) is used to compare address comparesion thats why when in Test class if you compare two objects then equals method giving false but when we override hashcode() the it can compare content and give proper result.

Both the methods are defined in Object class. And both are in its simplest implementation. So when you need you want add some more implementation to these methods then you have override in your class.
For Ex: equals() method in object only checks its equality on the reference. So if you need compare its state as well then you can override that as it is done in String class.

There's no mention in this answer of testing the equals/hashcode contract.
I've found the EqualsVerifier library to be very useful and comprehensive. It is also very easy to use.
Also, building equals() and hashCode() methods from scratch involves a lot of boilerplate code. The Apache Commons Lang library provides the EqualsBuilder and HashCodeBuilder classes. These classes greatly simplify implementing equals() and hashCode() methods for complex classes.
As an aside, it's worth considering overriding the toString() method to aid debugging. Apache Commons Lang library provides the ToStringBuilder class to help with this.