Develop Reference

Multiple Statement in single connection

I wrote code to run multiple statement in single connection. The first statement will retrieve IDs to be looped and used by the second statement then get the desired output. As example:
String sql1 = "SELECT ID FROM __TestParent WHERE Status = 'S'";
try (
Connection conn = DbConnector.getConnection();
Statement s = conn.createStatement();
Statement s2 = conn.createStatement();
ResultSet rs = s.executeQuery(sql1)
) {
while(rs.next()) {
String id = String.valueOf(rs.getInt("ID"));
String sql2 = "SELECT Description FROM __TestChild WHERE FK = " + id;
try (
ResultSet rs2 = s2.executeQuery(sql2)
) {
while(rs2.next())
Util.printLog("INFO",rs2.getString("Description"));
}catch(SQLTimeoutException sqltoex){
Util.printLog("SEVERE",sqltoex);
}catch(SQLException sqlex){
Util.printLog("SEVERE",sqlex);
}
}
}catch(SQLTimeoutException sqltoex){
Util.printLog("SEVERE",sqltoex);
}catch(SQLException sqlex){
Util.printLog("SEVERE",sqlex);
}
Util.printLog method is to print the message in the desired format
The code run perfectly fine and the output was as expected. What I want to know is:
Is this the right way to do it, or is/are there better way to write the code.
Is there anything that I need to be aware of? Because I seems cannot find anything about this use case other than this link Multiple-statements-single-connection from CodeRanch which is 16-year-old thread and I'm not quite clear other than driver support.
Thanks.

You can actually do what you want using a single query and result set:
SELECT c.Description
FROM __TestChild c
INNER JOIN __TestParent p
ON c.FK = p.ID
WHERE p.Status = 'S';
Code:
String sql = "SELECT c.Description FROM __TestChild c ";
sql += " INNER JOIN __TestParent p ON c.FK = p.ID ";
sql += "WHERE p.Status = 'S'";
try (
Connection conn = DbConnector.getConnection();
Statement s = conn.createStatement();
ResultSet rs = s.executeQuery(sql)
) {
while(rs.next()) {
Util.printLog("INFO", rs.getString("Description"));
}
} catch(SQLTimeoutException sqltoex) {
Util.printLog("SEVERE",sqltoex);
} catch(SQLException sqlex) {
Util.printLog("SEVERE",sqlex);
}

How do I get the last inserted primary key? [duplicate]

I want to INSERT a record in a database (which is Microsoft SQL Server in my case) using JDBC in Java. At the same time, I want to obtain the insert ID. How can I achieve this using JDBC API?

If it is an auto generated key, then you can use Statement#getGeneratedKeys() for this. You need to call it on the same Statement as the one being used for the INSERT. You first need to create the statement using Statement.RETURN_GENERATED_KEYS to notify the JDBC driver to return the keys.
Here's a basic example:
public void create(User user) throws SQLException {
try (
Connection connection = dataSource.getConnection();
PreparedStatement statement = connection.prepareStatement(SQL_INSERT,
Statement.RETURN_GENERATED_KEYS);
) {
statement.setString(1, user.getName());
statement.setString(2, user.getPassword());
statement.setString(3, user.getEmail());
// ...
int affectedRows = statement.executeUpdate();
if (affectedRows == 0) {
throw new SQLException("Creating user failed, no rows affected.");
}
try (ResultSet generatedKeys = statement.getGeneratedKeys()) {
if (generatedKeys.next()) {
user.setId(generatedKeys.getLong(1));
}
else {
throw new SQLException("Creating user failed, no ID obtained.");
}
}
}
}
Note that you're dependent on the JDBC driver as to whether it works. Currently, most of the last versions will work, but if I am correct, Oracle JDBC driver is still somewhat troublesome with this. MySQL and DB2 already supported it for ages. PostgreSQL started to support it not long ago. I can't comment about MSSQL as I've never used it.
For Oracle, you can invoke a CallableStatement with a RETURNING clause or a SELECT CURRVAL(sequencename) (or whatever DB-specific syntax to do so) directly after the INSERT in the same transaction to obtain the last generated key. See also this answer.

Create Generated Column
String generatedColumns[] = { "ID" };
Pass this geneated Column to your statement
PreparedStatement stmtInsert = conn.prepareStatement(insertSQL, generatedColumns);
Use ResultSet object to fetch the GeneratedKeys on Statement
ResultSet rs = stmtInsert.getGeneratedKeys();
if (rs.next()) {
long id = rs.getLong(1);
System.out.println("Inserted ID -" + id); // display inserted record
}

When encountering an 'Unsupported feature' error while using Statement.RETURN_GENERATED_KEYS, try this:
String[] returnId = { "BATCHID" };
String sql = "INSERT INTO BATCH (BATCHNAME) VALUES ('aaaaaaa')";
PreparedStatement statement = connection.prepareStatement(sql, returnId);
int affectedRows = statement.executeUpdate();
if (affectedRows == 0) {
throw new SQLException("Creating user failed, no rows affected.");
}
try (ResultSet rs = statement.getGeneratedKeys()) {
if (rs.next()) {
System.out.println(rs.getInt(1));
}
rs.close();
}
Where BATCHID is the auto generated id.

I'm hitting Microsoft SQL Server 2008 R2 from a single-threaded JDBC-based application and pulling back the last ID without using the RETURN_GENERATED_KEYS property or any PreparedStatement. Looks something like this:
private int insertQueryReturnInt(String SQLQy) {
ResultSet generatedKeys = null;
int generatedKey = -1;
try {
Statement statement = conn.createStatement();
statement.execute(SQLQy);
} catch (Exception e) {
errorDescription = "Failed to insert SQL query: " + SQLQy + "( " + e.toString() + ")";
return -1;
}
try {
generatedKey = Integer.parseInt(readOneValue("SELECT ##IDENTITY"));
} catch (Exception e) {
errorDescription = "Failed to get ID of just-inserted SQL query: " + SQLQy + "( " + e.toString() + ")";
return -1;
}
return generatedKey;
}
This blog post nicely isolates three main SQL Server "last ID" options:
http://msjawahar.wordpress.com/2008/01/25/how-to-find-the-last-identity-value-inserted-in-the-sql-server/ - haven't needed the other two yet.

Instead of a comment, I just want to answer post.
Interface java.sql.PreparedStatement
columnIndexes « You can use prepareStatement function that accepts columnIndexes and SQL statement.
Where columnIndexes allowed constant flags are Statement.RETURN_GENERATED_KEYS1 or Statement.NO_GENERATED_KEYS[2], SQL statement that may contain one or more '?' IN parameter placeholders.
SYNTAX «
Connection.prepareStatement(String sql, int autoGeneratedKeys)
Connection.prepareStatement(String sql, int[] columnIndexes)
Example:
PreparedStatement pstmt =
conn.prepareStatement( insertSQL, Statement.RETURN_GENERATED_KEYS );
columnNames « List out the columnNames like 'id', 'uniqueID', .... in the target table that contain the auto-generated keys that should be returned. The driver will ignore them if the SQL statement is not an INSERT statement.
SYNTAX «
Connection.prepareStatement(String sql, String[] columnNames)
Example:
String columnNames[] = new String[] { "id" };
PreparedStatement pstmt = conn.prepareStatement( insertSQL, columnNames );
Full Example:
public static void insertAutoIncrement_SQL(String UserName, String Language, String Message) {
String DB_URL = "jdbc:mysql://localhost:3306/test", DB_User = "root", DB_Password = "";
String insertSQL = "INSERT INTO `unicodeinfo`( `UserName`, `Language`, `Message`) VALUES (?,?,?)";
//"INSERT INTO `unicodeinfo`(`id`, `UserName`, `Language`, `Message`) VALUES (?,?,?,?)";
int primkey = 0 ;
try {
Class.forName("com.mysql.jdbc.Driver").newInstance();
Connection conn = DriverManager.getConnection(DB_URL, DB_User, DB_Password);
String columnNames[] = new String[] { "id" };
PreparedStatement pstmt = conn.prepareStatement( insertSQL, columnNames );
pstmt.setString(1, UserName );
pstmt.setString(2, Language );
pstmt.setString(3, Message );
if (pstmt.executeUpdate() > 0) {
// Retrieves any auto-generated keys created as a result of executing this Statement object
java.sql.ResultSet generatedKeys = pstmt.getGeneratedKeys();
if ( generatedKeys.next() ) {
primkey = generatedKeys.getInt(1);
}
}
System.out.println("Record updated with id = "+primkey);
} catch (InstantiationException | IllegalAccessException | ClassNotFoundException | SQLException e) {
e.printStackTrace();
}
}

I'm using SQLServer 2008, but I have a development limitation: I cannot use a new driver for it, I have to use "com.microsoft.jdbc.sqlserver.SQLServerDriver" (I cannot use "com.microsoft.sqlserver.jdbc.SQLServerDriver").
That's why the solution conn.prepareStatement(sql, Statement.RETURN_GENERATED_KEYS) threw a java.lang.AbstractMethodError for me.
In this situation, a possible solution I found is the old one suggested by Microsoft:
How To Retrieve ##IDENTITY Value Using JDBC
import java.sql.*;
import java.io.*;
public class IdentitySample
{
public static void main(String args[])
{
try
{
String URL = "jdbc:microsoft:sqlserver://yourServer:1433;databasename=pubs";
String userName = "yourUser";
String password = "yourPassword";
System.out.println( "Trying to connect to: " + URL);
//Register JDBC Driver
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver").newInstance();
//Connect to SQL Server
Connection con = null;
con = DriverManager.getConnection(URL,userName,password);
System.out.println("Successfully connected to server");
//Create statement and Execute using either a stored procecure or batch statement
CallableStatement callstmt = null;
callstmt = con.prepareCall("INSERT INTO myIdentTable (col2) VALUES (?);SELECT ##IDENTITY");
callstmt.setString(1, "testInputBatch");
System.out.println("Batch statement successfully executed");
callstmt.execute();
int iUpdCount = callstmt.getUpdateCount();
boolean bMoreResults = true;
ResultSet rs = null;
int myIdentVal = -1; //to store the ##IDENTITY
//While there are still more results or update counts
//available, continue processing resultsets
while (bMoreResults || iUpdCount!=-1)
{
//NOTE: in order for output parameters to be available,
//all resultsets must be processed
rs = callstmt.getResultSet();
//if rs is not null, we know we can get the results from the SELECT ##IDENTITY
if (rs != null)
{
rs.next();
myIdentVal = rs.getInt(1);
}
//Do something with the results here (not shown)
//get the next resultset, if there is one
//this call also implicitly closes the previously obtained ResultSet
bMoreResults = callstmt.getMoreResults();
iUpdCount = callstmt.getUpdateCount();
}
System.out.println( "##IDENTITY is: " + myIdentVal);
//Close statement and connection
callstmt.close();
con.close();
}
catch (Exception ex)
{
ex.printStackTrace();
}
try
{
System.out.println("Press any key to quit...");
System.in.read();
}
catch (Exception e)
{
}
}
}
This solution worked for me!
I hope this helps!

You can use following java code to get new inserted id.
ps = con.prepareStatement(query, Statement.RETURN_GENERATED_KEYS);
ps.setInt(1, quizid);
ps.setInt(2, userid);
ps.executeUpdate();
ResultSet rs = ps.getGeneratedKeys();
if (rs.next()) {
lastInsertId = rs.getInt(1);
}

It is possible to use it with normal Statement's as well (not just PreparedStatement)
Statement statement = conn.createStatement();
int updateCount = statement.executeUpdate("insert into x...)", Statement.RETURN_GENERATED_KEYS);
try (ResultSet generatedKeys = statement.getGeneratedKeys()) {
if (generatedKeys.next()) {
return generatedKeys.getLong(1);
}
else {
throw new SQLException("Creating failed, no ID obtained.");
}
}

Most others have suggested to use JDBC API for this, but personally, I find it quite painful to do with most drivers. When in fact, you can just use a native T-SQL feature, the OUTPUT clause:
try (
Statement s = c.createStatement();
ResultSet rs = s.executeQuery(
"""
INSERT INTO t (a, b)
OUTPUT id
VALUES (1, 2)
"""
);
) {
while (rs.next())
System.out.println("ID = " + rs.getLong(1));
}
This is the simplest solution for SQL Server as well as a few other SQL dialects (e.g. Firebird, MariaDB, PostgreSQL, where you'd use RETURNING instead of OUTPUT).
I've blogged about this topic more in detail here.

With Hibernate's NativeQuery, you need to return a ResultList instead of a SingleResult, because Hibernate modifies a native query
INSERT INTO bla (a,b) VALUES (2,3) RETURNING id
like
INSERT INTO bla (a,b) VALUES (2,3) RETURNING id LIMIT 1
if you try to get a single result, which causes most databases (at least PostgreSQL) to throw a syntax error. Afterwards, you may fetch the resulting id from the list (which usually contains exactly one item).

In my case ->
ConnectionClass objConnectionClass=new ConnectionClass();
con=objConnectionClass.getDataBaseConnection();
pstmtGetAdd=con.prepareStatement(SQL_INSERT_ADDRESS_QUERY,Statement.RETURN_GENERATED_KEYS);
pstmtGetAdd.setString(1, objRegisterVO.getAddress());
pstmtGetAdd.setInt(2, Integer.parseInt(objRegisterVO.getCityId()));
int addId=pstmtGetAdd.executeUpdate();
if(addId>0)
{
ResultSet rsVal=pstmtGetAdd.getGeneratedKeys();
rsVal.next();
addId=rsVal.getInt(1);
}

If you are using Spring JDBC, you can use Spring's GeneratedKeyHolder class to get the inserted ID.
See this answer...
How to get inserted id using Spring Jdbctemplate.update(String sql, obj...args)

If you are using JDBC (tested with MySQL) and you just want the last inserted ID, there is an easy way to get it. The method I'm using is the following:
public static Integer insert(ConnectionImpl connection, String insertQuery){
Integer lastInsertId = -1;
try{
final PreparedStatement ps = connection.prepareStatement(insertQuery);
ps.executeUpdate(insertQuery);
final com.mysql.jdbc.PreparedStatement psFinal = (com.mysql.jdbc.PreparedStatement) ps;
lastInsertId = (int) psFinal.getLastInsertID();
connection.close();
} catch(SQLException ex){
System.err.println("Error: "+ex);
}
return lastInsertId;
}
Also, (and just in case) the method to get the ConnectionImpl is the following:
public static ConnectionImpl getConnectionImpl(){
ConnectionImpl conexion = null;
final String dbName = "database_name";
final String dbPort = "3306";
final String dbIPAddress = "127.0.0.1";
final String connectionPath = "jdbc:mysql://"+dbIPAddress+":"+dbPort+"/"+dbName+"?autoReconnect=true&useSSL=false";
final String dbUser = "database_user";
final String dbPassword = "database_password";
try{
conexion = (ConnectionImpl) DriverManager.getConnection(connectionPath, dbUser, dbPassword);
}catch(SQLException e){
System.err.println(e);
}
return conexion;
}
Remember to add the connector/J to the project referenced libraries.
In my case, the connector/J version is the 5.1.42. Maybe you will have to apply some changes to the connectionPath if you want to use a more modern version of the connector/J such as with the version 8.0.28.
In the file, remember to import the following resources:
import java.sql.DriverManager;
import java.sql.PreparedStatement;
import java.sql.SQLException;
import com.mysql.jdbc.ConnectionImpl;
Hope this will be helpful.

Connection cn = DriverManager.getConnection("Host","user","pass");
Statement st = cn.createStatement("Ur Requet Sql");
int ret = st.execute();

how to display results on label with sql

UPDATE
i changed sql query (just test it and it works on sql but still not working with java dont no why :(
Hi how to add get result on jLabel with this code? and is it possible to show results on jTable?
private void searchTeacherActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
String sql = ("select student_ID, firstName, afterName FROM student JOIN studentHom ON course = studentHom_ID WHERE prefect = ?
try {
pst = connection.prepareStatement(sql);
pst.setString(1, larareSoka.getText());
pst.execute();
} catch (Exception e) {
JOptionPane.showMessageDialog(rootPane, e);
}
}

First don't use (?) you can just use ?:
select ... where course.courseStart = ? and course.corse.end = ?
Second you have to set parametters to your query in your case you have tow, so you have to use :
pst.setString(1, value_of_courseStart);
pst.setString(2, value_of_corse.end);
Third to get results you have to use ResultSet like this :
ResultSet result = preparedStatement.executeQuery();
if (result.next()) {
String firstname = result.getString(1);
//----------------------------------^
//...same for the other columns
}
or you can use the name of column like this:
ResultSet result = preparedStatement.executeQuery();
if (result.next()) {
String firstname = result.getString("firstName");
//--------------------------------------^^
//...same for the other columns
}
Note
If you want to get multiple result you ca use while instead of if.
Your query is a little wired why you are using :
course.courseStart = (?) and course.corse.end = (?)
//no point---^ ^------Why this point here
Did you mean course.courseStart = ? and course.corseEnd = ?

ResultSet rs = pst.executeQuery();
String firstname = rs.getString("firstname");
..
jLable.setText(firstname);
...You need to read the data from the resultset

How to perform one to one table INSERT query [duplicate]

I want to INSERT a record in a database (which is Microsoft SQL Server in my case) using JDBC in Java. At the same time, I want to obtain the insert ID. How can I achieve this using JDBC API?

If it is an auto generated key, then you can use Statement#getGeneratedKeys() for this. You need to call it on the same Statement as the one being used for the INSERT. You first need to create the statement using Statement.RETURN_GENERATED_KEYS to notify the JDBC driver to return the keys.
Here's a basic example:
public void create(User user) throws SQLException {
try (
Connection connection = dataSource.getConnection();
PreparedStatement statement = connection.prepareStatement(SQL_INSERT,
Statement.RETURN_GENERATED_KEYS);
) {
statement.setString(1, user.getName());
statement.setString(2, user.getPassword());
statement.setString(3, user.getEmail());
// ...
int affectedRows = statement.executeUpdate();
if (affectedRows == 0) {
throw new SQLException("Creating user failed, no rows affected.");
}
try (ResultSet generatedKeys = statement.getGeneratedKeys()) {
if (generatedKeys.next()) {
user.setId(generatedKeys.getLong(1));
}
else {
throw new SQLException("Creating user failed, no ID obtained.");
}
}
}
}
Note that you're dependent on the JDBC driver as to whether it works. Currently, most of the last versions will work, but if I am correct, Oracle JDBC driver is still somewhat troublesome with this. MySQL and DB2 already supported it for ages. PostgreSQL started to support it not long ago. I can't comment about MSSQL as I've never used it.
For Oracle, you can invoke a CallableStatement with a RETURNING clause or a SELECT CURRVAL(sequencename) (or whatever DB-specific syntax to do so) directly after the INSERT in the same transaction to obtain the last generated key. See also this answer.

Create Generated Column
String generatedColumns[] = { "ID" };
Pass this geneated Column to your statement
PreparedStatement stmtInsert = conn.prepareStatement(insertSQL, generatedColumns);
Use ResultSet object to fetch the GeneratedKeys on Statement
ResultSet rs = stmtInsert.getGeneratedKeys();
if (rs.next()) {
long id = rs.getLong(1);
System.out.println("Inserted ID -" + id); // display inserted record
}

When encountering an 'Unsupported feature' error while using Statement.RETURN_GENERATED_KEYS, try this:
String[] returnId = { "BATCHID" };
String sql = "INSERT INTO BATCH (BATCHNAME) VALUES ('aaaaaaa')";
PreparedStatement statement = connection.prepareStatement(sql, returnId);
int affectedRows = statement.executeUpdate();
if (affectedRows == 0) {
throw new SQLException("Creating user failed, no rows affected.");
}
try (ResultSet rs = statement.getGeneratedKeys()) {
if (rs.next()) {
System.out.println(rs.getInt(1));
}
rs.close();
}
Where BATCHID is the auto generated id.

I'm hitting Microsoft SQL Server 2008 R2 from a single-threaded JDBC-based application and pulling back the last ID without using the RETURN_GENERATED_KEYS property or any PreparedStatement. Looks something like this:
private int insertQueryReturnInt(String SQLQy) {
ResultSet generatedKeys = null;
int generatedKey = -1;
try {
Statement statement = conn.createStatement();
statement.execute(SQLQy);
} catch (Exception e) {
errorDescription = "Failed to insert SQL query: " + SQLQy + "( " + e.toString() + ")";
return -1;
}
try {
generatedKey = Integer.parseInt(readOneValue("SELECT ##IDENTITY"));
} catch (Exception e) {
errorDescription = "Failed to get ID of just-inserted SQL query: " + SQLQy + "( " + e.toString() + ")";
return -1;
}
return generatedKey;
}
This blog post nicely isolates three main SQL Server "last ID" options:
http://msjawahar.wordpress.com/2008/01/25/how-to-find-the-last-identity-value-inserted-in-the-sql-server/ - haven't needed the other two yet.

Instead of a comment, I just want to answer post.
Interface java.sql.PreparedStatement
columnIndexes « You can use prepareStatement function that accepts columnIndexes and SQL statement.
Where columnIndexes allowed constant flags are Statement.RETURN_GENERATED_KEYS1 or Statement.NO_GENERATED_KEYS[2], SQL statement that may contain one or more '?' IN parameter placeholders.
SYNTAX «
Connection.prepareStatement(String sql, int autoGeneratedKeys)
Connection.prepareStatement(String sql, int[] columnIndexes)
Example:
PreparedStatement pstmt =
conn.prepareStatement( insertSQL, Statement.RETURN_GENERATED_KEYS );
columnNames « List out the columnNames like 'id', 'uniqueID', .... in the target table that contain the auto-generated keys that should be returned. The driver will ignore them if the SQL statement is not an INSERT statement.
SYNTAX «
Connection.prepareStatement(String sql, String[] columnNames)
Example:
String columnNames[] = new String[] { "id" };
PreparedStatement pstmt = conn.prepareStatement( insertSQL, columnNames );
Full Example:
public static void insertAutoIncrement_SQL(String UserName, String Language, String Message) {
String DB_URL = "jdbc:mysql://localhost:3306/test", DB_User = "root", DB_Password = "";
String insertSQL = "INSERT INTO `unicodeinfo`( `UserName`, `Language`, `Message`) VALUES (?,?,?)";
//"INSERT INTO `unicodeinfo`(`id`, `UserName`, `Language`, `Message`) VALUES (?,?,?,?)";
int primkey = 0 ;
try {
Class.forName("com.mysql.jdbc.Driver").newInstance();
Connection conn = DriverManager.getConnection(DB_URL, DB_User, DB_Password);
String columnNames[] = new String[] { "id" };
PreparedStatement pstmt = conn.prepareStatement( insertSQL, columnNames );
pstmt.setString(1, UserName );
pstmt.setString(2, Language );
pstmt.setString(3, Message );
if (pstmt.executeUpdate() > 0) {
// Retrieves any auto-generated keys created as a result of executing this Statement object
java.sql.ResultSet generatedKeys = pstmt.getGeneratedKeys();
if ( generatedKeys.next() ) {
primkey = generatedKeys.getInt(1);
}
}
System.out.println("Record updated with id = "+primkey);
} catch (InstantiationException | IllegalAccessException | ClassNotFoundException | SQLException e) {
e.printStackTrace();
}
}

I'm using SQLServer 2008, but I have a development limitation: I cannot use a new driver for it, I have to use "com.microsoft.jdbc.sqlserver.SQLServerDriver" (I cannot use "com.microsoft.sqlserver.jdbc.SQLServerDriver").
That's why the solution conn.prepareStatement(sql, Statement.RETURN_GENERATED_KEYS) threw a java.lang.AbstractMethodError for me.
In this situation, a possible solution I found is the old one suggested by Microsoft:
How To Retrieve ##IDENTITY Value Using JDBC
import java.sql.*;
import java.io.*;
public class IdentitySample
{
public static void main(String args[])
{
try
{
String URL = "jdbc:microsoft:sqlserver://yourServer:1433;databasename=pubs";
String userName = "yourUser";
String password = "yourPassword";
System.out.println( "Trying to connect to: " + URL);
//Register JDBC Driver
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver").newInstance();
//Connect to SQL Server
Connection con = null;
con = DriverManager.getConnection(URL,userName,password);
System.out.println("Successfully connected to server");
//Create statement and Execute using either a stored procecure or batch statement
CallableStatement callstmt = null;
callstmt = con.prepareCall("INSERT INTO myIdentTable (col2) VALUES (?);SELECT ##IDENTITY");
callstmt.setString(1, "testInputBatch");
System.out.println("Batch statement successfully executed");
callstmt.execute();
int iUpdCount = callstmt.getUpdateCount();
boolean bMoreResults = true;
ResultSet rs = null;
int myIdentVal = -1; //to store the ##IDENTITY
//While there are still more results or update counts
//available, continue processing resultsets
while (bMoreResults || iUpdCount!=-1)
{
//NOTE: in order for output parameters to be available,
//all resultsets must be processed
rs = callstmt.getResultSet();
//if rs is not null, we know we can get the results from the SELECT ##IDENTITY
if (rs != null)
{
rs.next();
myIdentVal = rs.getInt(1);
}
//Do something with the results here (not shown)
//get the next resultset, if there is one
//this call also implicitly closes the previously obtained ResultSet
bMoreResults = callstmt.getMoreResults();
iUpdCount = callstmt.getUpdateCount();
}
System.out.println( "##IDENTITY is: " + myIdentVal);
//Close statement and connection
callstmt.close();
con.close();
}
catch (Exception ex)
{
ex.printStackTrace();
}
try
{
System.out.println("Press any key to quit...");
System.in.read();
}
catch (Exception e)
{
}
}
}
This solution worked for me!
I hope this helps!

You can use following java code to get new inserted id.
ps = con.prepareStatement(query, Statement.RETURN_GENERATED_KEYS);
ps.setInt(1, quizid);
ps.setInt(2, userid);
ps.executeUpdate();
ResultSet rs = ps.getGeneratedKeys();
if (rs.next()) {
lastInsertId = rs.getInt(1);
}

It is possible to use it with normal Statement's as well (not just PreparedStatement)
Statement statement = conn.createStatement();
int updateCount = statement.executeUpdate("insert into x...)", Statement.RETURN_GENERATED_KEYS);
try (ResultSet generatedKeys = statement.getGeneratedKeys()) {
if (generatedKeys.next()) {
return generatedKeys.getLong(1);
}
else {
throw new SQLException("Creating failed, no ID obtained.");
}
}

Most others have suggested to use JDBC API for this, but personally, I find it quite painful to do with most drivers. When in fact, you can just use a native T-SQL feature, the OUTPUT clause:
try (
Statement s = c.createStatement();
ResultSet rs = s.executeQuery(
"""
INSERT INTO t (a, b)
OUTPUT id
VALUES (1, 2)
"""
);
) {
while (rs.next())
System.out.println("ID = " + rs.getLong(1));
}
This is the simplest solution for SQL Server as well as a few other SQL dialects (e.g. Firebird, MariaDB, PostgreSQL, where you'd use RETURNING instead of OUTPUT).
I've blogged about this topic more in detail here.

With Hibernate's NativeQuery, you need to return a ResultList instead of a SingleResult, because Hibernate modifies a native query
INSERT INTO bla (a,b) VALUES (2,3) RETURNING id
like
INSERT INTO bla (a,b) VALUES (2,3) RETURNING id LIMIT 1
if you try to get a single result, which causes most databases (at least PostgreSQL) to throw a syntax error. Afterwards, you may fetch the resulting id from the list (which usually contains exactly one item).

In my case ->
ConnectionClass objConnectionClass=new ConnectionClass();
con=objConnectionClass.getDataBaseConnection();
pstmtGetAdd=con.prepareStatement(SQL_INSERT_ADDRESS_QUERY,Statement.RETURN_GENERATED_KEYS);
pstmtGetAdd.setString(1, objRegisterVO.getAddress());
pstmtGetAdd.setInt(2, Integer.parseInt(objRegisterVO.getCityId()));
int addId=pstmtGetAdd.executeUpdate();
if(addId>0)
{
ResultSet rsVal=pstmtGetAdd.getGeneratedKeys();
rsVal.next();
addId=rsVal.getInt(1);
}

If you are using Spring JDBC, you can use Spring's GeneratedKeyHolder class to get the inserted ID.
See this answer...
How to get inserted id using Spring Jdbctemplate.update(String sql, obj...args)

If you are using JDBC (tested with MySQL) and you just want the last inserted ID, there is an easy way to get it. The method I'm using is the following:
public static Integer insert(ConnectionImpl connection, String insertQuery){
Integer lastInsertId = -1;
try{
final PreparedStatement ps = connection.prepareStatement(insertQuery);
ps.executeUpdate(insertQuery);
final com.mysql.jdbc.PreparedStatement psFinal = (com.mysql.jdbc.PreparedStatement) ps;
lastInsertId = (int) psFinal.getLastInsertID();
connection.close();
} catch(SQLException ex){
System.err.println("Error: "+ex);
}
return lastInsertId;
}
Also, (and just in case) the method to get the ConnectionImpl is the following:
public static ConnectionImpl getConnectionImpl(){
ConnectionImpl conexion = null;
final String dbName = "database_name";
final String dbPort = "3306";
final String dbIPAddress = "127.0.0.1";
final String connectionPath = "jdbc:mysql://"+dbIPAddress+":"+dbPort+"/"+dbName+"?autoReconnect=true&useSSL=false";
final String dbUser = "database_user";
final String dbPassword = "database_password";
try{
conexion = (ConnectionImpl) DriverManager.getConnection(connectionPath, dbUser, dbPassword);
}catch(SQLException e){
System.err.println(e);
}
return conexion;
}
Remember to add the connector/J to the project referenced libraries.
In my case, the connector/J version is the 5.1.42. Maybe you will have to apply some changes to the connectionPath if you want to use a more modern version of the connector/J such as with the version 8.0.28.
In the file, remember to import the following resources:
import java.sql.DriverManager;
import java.sql.PreparedStatement;
import java.sql.SQLException;
import com.mysql.jdbc.ConnectionImpl;
Hope this will be helpful.

Connection cn = DriverManager.getConnection("Host","user","pass");
Statement st = cn.createStatement("Ur Requet Sql");
int ret = st.execute();

Problems in removing records from database of jList

Hello I have the problem.. can anyone give me snippet? i have the table of MySql that display JList item so I can add the item easily but can't remove it from database? while pressing remove item?
I searched a lot no one has ever need of doing.. i wonder how its possible?
private void jButton3ActionPerformed(java.awt.event.ActionEvent evt) {
try {
Class.forName("com.mysql.jdbc.Driver");
Connection con= (Connection) DriverManager.getConnection("jdbc:mysql://localhost:3306/test","root","ubuntu123");
PreparedStatement stmt = null;
ResultSet rs = null;
String [] data;
data = new String[100];
int i=0;
DefaultListModel listmodel = (DefaultListModel) jList2.getModel();
int selectedIndex = jList2.getSelectedIndex();
if (selectedIndex != -1) {
listmodel.remove(selectedIndex);
String query = "delete from supplierinfo where companyname = ?";
stmt = (PreparedStatement) con.prepareStatement(query);
stmt.setInt(1, i);
stmt.execute();
con.close();
// i= i+1;
}
} catch(Exception e) {
System.out.println("3rd catch " +e);
}
}

You can save element in a variable when you remove it from ListModel.
After that you can get all important info about this item and use it in your query.
Use something like this:
YourObjectType obj = (YourObjectType) listmodel.remove(selectedIndex);
String query = "delete from supplierinfo where companyname = ?";
stmt = (PreparedStatement) con.prepareStatement(query);
stmt.setInt(1, obj.getCompanyName());
stmt.execute();

Use the ListModel#getElementAt(int) method with the currently selected index.
If you are certain your model only contains String instances, you can directly cast it to a String, then replace i with this string in stmt.setInt(1, i);