Related
While debugging a java app in eclipse I receive a "Source not found" error in two cases:
Stepping in to a file in a different project which is already imported
Stepping in to a file in an installed maven repository
The files are there, but eclipse won't step into them, instead it shows a button to "attach source"
I tried attaching (which opened a dialog to define a variable?!) and eclipse did jump to the file, but the debugger could not inspect any variables there. Also manually attaching the source for each dependency isn't practical, as in my case there are thousands of dependency files.
Why is this happening, and how can it be resolved?
Just 3 steps to configuration Eclipse IDE:
Note: After updating the Source Lookup paths, you'll have to stop and restart your debug session. Otherwise, the file with the missing source will continue to show "missing source".
Edit Source Lookup
Select the Edit Source Lookup... command [ Edit Source Lookup ] to open the Source Path Dialog, which allows you to make changes to the source lookup path of the selected debug target.
IMPORTANT Restart Eclipse after this last step.
Eclipse debugging works with the class actually loaded by the program.
The symptoms you describe sounds like the class in question was not found in the project, but in a distribution jar without debug info found before the project you are working with.
This can happen for several reasons but have a look at the location where the classes showing this behaviour is found (look in the navigation pane to identify it). You will most likely need to change the build path of the project to avoid using this jar and have the JVM use the project instead.
EDIT: Note that as of 2018 it is common to use a build framework like Maven, where the build path is managed by the m2e plugin so this problem should be very less frequent than when the question was asked. If you use Maven and m2e, make sure to enable Preferences / Maven / "Download Artifact Sources" or right-click the project, Maven / "Download Sources".
The symptoms perfectly describes the case when the found class doesn't have associated (or assigned) source.
You can associate the sources for JDK classes in Preferences > Java > Installed JRE. If JRE (not JDK) is detected as default JRE to be used, then your JDK classes won't have attached sources. Note that, not all of the JDK classes have provided sources, some of them are distributed in binary form only.
Classes from project's build path, added manually requires that you manually attach the associated source. The source can reside in a zip or jar file, in the workspace or in the filesystem. Eclipse will scan the zip, so your sources doesn't have to be in the root of the archive file, for example.
Classes, from dependencies coming from another plugins (maven, PDE, etc.). In this case, it is up to the plugin how the source will be provided.
PDE will require that each plugin have corresponding XXX.source bundle, which contains the source of the plugin. More information can be found here and here.
m2eclipse can fetch sources and javadocs for Maven dependencies if they are available. This feature should be enabled m2eclipse preferences (the option was named something like "Download source and javadocs".
For other plugins, you'll need to consult their documentation
Classes, which are loaded from your project are automatically matched with the sources from the project.
But what if Eclipse still suggest that you attach source, even if I correctly set my classes and their sources:
This almost always means that Eclipse is finding the class from different place than you expect. Inspect your source lookup path to see where it might get the wrong class. Update the path accordingly to your findings.
Eclipse doesn't find anything at all, when breakpoint is hit:
This happens, when you are source lookup path doesn't contain the class, which is currently loaded in the runtime. Even if the class is in the workspace, it can be invisible to the launch configuration, because Eclipse follows the source lookup path strictly and attaches only the dependencies of the project, which is currently debugged.
An exception is the debugging bundles in PDE. In this case, because the runtime is composed from multiple projects, which doesn't have to declare dependencies on one another, Eclipse will automatically find the class in the workspace, even if it is not available in the source lookup path.
I cannot see the variables when I hit a breakpoint or it just opens the source, but doesn't select the breakpoint line:
This means that in the runtime, either the JVM or the classes themselves doesn't have the necessary debug information. Each time classes are compiled, debug information can be attached. To reduce the storage space of the classes, sometimes this information is omitted, which makes debugging such code a pain. Your only chance is to try and recompile with debug enabled.
Eclipse source viewer shows different lines than those that are actually executed:
It sometimes can show that empty space is executed as well. This means that your sources doesn't match your runtime version of the classes. Even if you think that this is not possible, it is, so make sure you setup the correct sources. Or your runtime match your latest changes, depending on what are you trying to do.
From http://www.coderanch.com/t/587493/vc/Debugging-Eclipse-Source
"When running in debug mode, right click on the running thread (in threads tab) and select Edit Source Lookup. At this point, you should be able to add the necessary project/jar which contains your source code."
I added my current project in this way, and it solved my problem
I had similar problem with my eclipse maven project. I fought with this issue quite a long time then I tried to rebuild project with
mvn clean eclipse:eclipse
and it helped.
Note: Using this approach will confuse the m2e plugin since the two approaches are very different. m2e adds a virtual node to your project called "Maven Dependencies" and asks Maven to add all dependencies there.
mvn eclipse:eclipse, on the other hand, will create a lot of individual entries in the file .classpath. Eclipse will handle them as if you manually added JARs to your project.
Unless you know how the classpath in Eclipse works, this approach is not recommended.
I was facing the same issue,I followed the bellow steps.
Window => Preferences => Java => Installed JREs,
You see in the above screen Jre1.8.0_12 is selected.
select the JRE you are using and click Edit. Now You should see the bellow screen.
Click on the directory, browse for Jdk, It should look like bellow screen.
click ok, and its done
I had the problem that my Eclipse was not debugging the source code of my project. I was getting a blank page with "Source code node found".
Please click the Attach source code button. Then delete the "default" folder then click add and go to your project location and attach. This worked for me
Remove the existing Debug Configuration and create a new one. That should resolve the problem.
None of the mentioned answer worked for me.
To resolve this issue i have to follow bellow steps:
Right click on Java HotSpot(TM) 64 Bit server.
Select "Edit Source Lookup".
Click on "Add".
Select "File System Directory" instead of Java project.
Select Root directory of your project.
Check "Search Subfolders".
Click Ok ok ok.
Thanks.
Click -> Edit Source Lookup Path
after then
Click -> Add finally select Java project and select project path.
Source: https://www.youtube.com/watch?v=IGIKPY6q1Qw
In my case, even after Editing source lookup and Adding project, it didn't worked. I configured the Build path of the project.
After that, I selected JRE System Library and it worked.
Evidently, Eclipse does not automatically know where the source code for the dependent jars are. It is not clear why debugger could not inspect variables once the source was attached. One possibility is incorrect/incompatible source.
Assuming you have a maven project and the sources of the dependencies are downloaded and available in the local repository, you may want to install m2eclipse, the maven eclipse plugin and see if that helps in addressing your issue.
You might have source code of a dependency accessible to Eclipse. But Eclipse does not know for source code for code that is dynamically loaded. E.g. through Maven.
In case of Maven, I recommend that you use run-jetty-run plugin:
http://code.google.com/p/run-jetty-run/
As a workaround you can also connect to a running JVM with the debugger and you will see the code.
Alternatively you can use Dynamic Source Lookup plugin for Eclipse from here:
https://github.com/ifedorenko/com.ifedorenko.m2e.sourcelookup
Unfortunately it didn't helped me as it has issues with Windows paths with spaces.
I have filled an enhancement request on Eclipse Bugzilla and if you agree this issue "Source not found" should vanish forever, please vote for it here:
https://bugs.eclipse.org/bugs/show_bug.cgi?id=384065
Thanks!
Sasa
In my case in "Attach Source", I added the other maven project directory in the "Source Attachment Configuration" panel. Adding the latest version jar from the m2 repository din't work. All the classes from the other maven project failed to open.
Here test was my other maven project containing all the java sources.
I had the very same problem. In my case, I've disabled Window-Preferences-Java-Debug [Suspend execution on uncaught exceptions]. Then, the console showed me the correct error: my MySql user hadn't privileges to access the database. According to this topic.
Info: This is a possible solution, when you use maven (pom.xml) with couple of projects.
If you are working with maven, make sure what version you are taking inside the according pom.xml (e. g. 1.0.1-SNAPSHOT ).
It might be possible that your code is up-to-date, but your pom.xml dependencies are still taking the old JAR's/Snapshots (with the old code).
Finding the problem:
Try to debug the according file.
Therefore, set a breakpoint in the relevant code area.
When "source not found" appears, make sure to bind in the right project (where the .java file can be found).
The compile .class file opens up in the IDE editor.
Click "Link with Editor" to find the according JAR/Snapshot.
Now make sure that this JAR is the most recent one. Possibly there is a newer one. In that case, write the most recent version number in the pom.xml.
Then do a maven update and build (e. g. "mvn clean install -U") in the right project directory.
If you are on eclipse or STS please install and Use GC(GrepCode Plugin) ,some time you don't need to attach the source .zip file into your project path so GrepCode works fine for you.
I've had a related issue in connection with Glassfish server debugging in Eclipse.
This was brought about by loading the source code from a different repository (changing from SVN to GitHub). In the process, the wrong compiled classes were used by the Glassfish server and hence, the source and run time would be out of sync with break points appearing on empty lines.
To solve this, rename or delete the top folder of the classes directory and Glassfish will recreate the whole class directory tree including updating the class files with the correctly compiled version.
The classes directory is located in: /workspace/glassfish3122eclipsedefaultdomain/eclipseApps/< your Web Application>/WEB-INF/classes
In my case with tomcat projects I have checked project here:
Window - Preferences - Tomcat - Source Path - Add java projects to source path
In my case the Maven version of the other referenced project didn't match the version of the test project. Once they were the same, the problem disappeared.
When running in debug mode, click Edit Source Lookup after suspended from thread. At this point, we should be able to add the necessary project/jar which contains your source code.
After I added my current project in this way, and it solved my problem. Thanks
If you want to attach source code to any JAR by auto-downloading, try using this Eclipse plugin Java Source Attacher
I had this problem while working on java code to do process on a excel file containing a data set, then convert it to .csv file, i tried answers to this post, but they did not work.
the problem was the jar files themselves. after downloading needed jar files one by one(older releases) and add them to my project, "source not found" error vanished.
maybe you can check your jar files.
hope this would help.
this worked for me
right click on project -> Properties -> Deployment Assembly -> add your jar
Go to Debug configuration in eclipse and use below goal to run your application.
-Dmaven.surefire.debug
e.g
-Dmaven.surefire.debug exec:java
Well, here's what worked for me. I tried every possible solution on StackOverflow that there was. I tried changing my source location in the debug menu, I installed the m2e Eclipse plugin, I changed from embedded Maven, and I installed the run-jetty-run and nothing worked. Now, I will caveat that I was not trying to view an external person's source code, I just wanted to see my OWN code, but every time I "stepped in" to my methods that I wrote that were in MY project, I got the "Source now found" error.
After finally asking an expert, my issue was that the first thing Eclipse was doing was calling a ClassLoader, which you can see from the debug stack. All I had to do was F6 (step over) and then it took me back to my original call and then F5 (step in). And there was my code. Sigh...such a simple fix but an hour wasted.
For beginners,
There is a possibility that the jar file is a part of the project which you have not yet included in the Eclipse workspace.
For that, you need to know the project name of the jar file.
Say for example, its abc-18.0.0-SNAPSHOT.jar, it means that the project you are supposed to include in your workspace is abc.
I had the same issue with eclipse 2019-03 (4.11.0) and I was only able to solve this by doing the debugging via remote debugging instead of directly launching it in debug mode.
Attach source -> Add -> External Archive -> select the jar -> open -> done
the catch is look for the sources jar and attach this jar.
for example the jar ends with "-sources" Stax2-api-3.4.1-sources
sometimes these thing happens because of the version also like if you are using latest
version in that case it may arise try to use older version it will work.
I wonder if anyone is using codenameone with lombok in Eclipse. I've googled, but all I could find is an old question of mine.
A tiny success
I've tried it, took a demo project, modified nothing and opened it in my Eclipse configured for Lombok. When compiling, I got the same stacktrace as here. I've added
/usr/lib/jvm/java-8-oracle/lib/tools.jar
to the path under Preferences -> Installed JREs -> Edit -> JRE system libraries (which may be a pure non-sense) and it didn't help.
Then I've replaced compiler="modern" by compiler="extJavac" in build.xml and it compiles. I can even use Lombok annotations and they compile and work in the simulator.
The problem
I'm afraid, this was the simple part. I guess, for submitting, I need to replace the source code by the output of delombok. I've tried to submit it as is and nothing happened (no error, no response).
Has anyone done it already?
Any tips?
You shouldn't change the classpath but if the bytecode has access to the properties then it should "just work". If you look at the build.xml file you will notice that it has targets for every one of the supported platforms and before the target occurs you will see a compilation target that packages the JAR that's sent to the servers.
Steve wrote a post about porting other languages to Codename One. This is simple by comparison.
It actually works! All I had to do was to
add the path to lombok.jar to the Java Build Path1
in the javac call of the jar task
replace compiler="modern" by compiler="extJavac"
add the path to lombok.jar to the classpath
1 This is not recommended as the dependency is unavailable on the build server, but that's exactly right. Lombok is a compile-time only dependency and the build seems to be based on the dist.jar, where Lombok has already done its job.
One year later: There was a problem with my old setup, so I installed everything anew and it seems to work. Just note that there are three javac tasks in the build.xml.
While debugging a java app in eclipse I receive a "Source not found" error in two cases:
Stepping in to a file in a different project which is already imported
Stepping in to a file in an installed maven repository
The files are there, but eclipse won't step into them, instead it shows a button to "attach source"
I tried attaching (which opened a dialog to define a variable?!) and eclipse did jump to the file, but the debugger could not inspect any variables there. Also manually attaching the source for each dependency isn't practical, as in my case there are thousands of dependency files.
Why is this happening, and how can it be resolved?
Just 3 steps to configuration Eclipse IDE:
Note: After updating the Source Lookup paths, you'll have to stop and restart your debug session. Otherwise, the file with the missing source will continue to show "missing source".
Edit Source Lookup
Select the Edit Source Lookup... command [ Edit Source Lookup ] to open the Source Path Dialog, which allows you to make changes to the source lookup path of the selected debug target.
IMPORTANT Restart Eclipse after this last step.
Eclipse debugging works with the class actually loaded by the program.
The symptoms you describe sounds like the class in question was not found in the project, but in a distribution jar without debug info found before the project you are working with.
This can happen for several reasons but have a look at the location where the classes showing this behaviour is found (look in the navigation pane to identify it). You will most likely need to change the build path of the project to avoid using this jar and have the JVM use the project instead.
EDIT: Note that as of 2018 it is common to use a build framework like Maven, where the build path is managed by the m2e plugin so this problem should be very less frequent than when the question was asked. If you use Maven and m2e, make sure to enable Preferences / Maven / "Download Artifact Sources" or right-click the project, Maven / "Download Sources".
The symptoms perfectly describes the case when the found class doesn't have associated (or assigned) source.
You can associate the sources for JDK classes in Preferences > Java > Installed JRE. If JRE (not JDK) is detected as default JRE to be used, then your JDK classes won't have attached sources. Note that, not all of the JDK classes have provided sources, some of them are distributed in binary form only.
Classes from project's build path, added manually requires that you manually attach the associated source. The source can reside in a zip or jar file, in the workspace or in the filesystem. Eclipse will scan the zip, so your sources doesn't have to be in the root of the archive file, for example.
Classes, from dependencies coming from another plugins (maven, PDE, etc.). In this case, it is up to the plugin how the source will be provided.
PDE will require that each plugin have corresponding XXX.source bundle, which contains the source of the plugin. More information can be found here and here.
m2eclipse can fetch sources and javadocs for Maven dependencies if they are available. This feature should be enabled m2eclipse preferences (the option was named something like "Download source and javadocs".
For other plugins, you'll need to consult their documentation
Classes, which are loaded from your project are automatically matched with the sources from the project.
But what if Eclipse still suggest that you attach source, even if I correctly set my classes and their sources:
This almost always means that Eclipse is finding the class from different place than you expect. Inspect your source lookup path to see where it might get the wrong class. Update the path accordingly to your findings.
Eclipse doesn't find anything at all, when breakpoint is hit:
This happens, when you are source lookup path doesn't contain the class, which is currently loaded in the runtime. Even if the class is in the workspace, it can be invisible to the launch configuration, because Eclipse follows the source lookup path strictly and attaches only the dependencies of the project, which is currently debugged.
An exception is the debugging bundles in PDE. In this case, because the runtime is composed from multiple projects, which doesn't have to declare dependencies on one another, Eclipse will automatically find the class in the workspace, even if it is not available in the source lookup path.
I cannot see the variables when I hit a breakpoint or it just opens the source, but doesn't select the breakpoint line:
This means that in the runtime, either the JVM or the classes themselves doesn't have the necessary debug information. Each time classes are compiled, debug information can be attached. To reduce the storage space of the classes, sometimes this information is omitted, which makes debugging such code a pain. Your only chance is to try and recompile with debug enabled.
Eclipse source viewer shows different lines than those that are actually executed:
It sometimes can show that empty space is executed as well. This means that your sources doesn't match your runtime version of the classes. Even if you think that this is not possible, it is, so make sure you setup the correct sources. Or your runtime match your latest changes, depending on what are you trying to do.
From http://www.coderanch.com/t/587493/vc/Debugging-Eclipse-Source
"When running in debug mode, right click on the running thread (in threads tab) and select Edit Source Lookup. At this point, you should be able to add the necessary project/jar which contains your source code."
I added my current project in this way, and it solved my problem
I had similar problem with my eclipse maven project. I fought with this issue quite a long time then I tried to rebuild project with
mvn clean eclipse:eclipse
and it helped.
Note: Using this approach will confuse the m2e plugin since the two approaches are very different. m2e adds a virtual node to your project called "Maven Dependencies" and asks Maven to add all dependencies there.
mvn eclipse:eclipse, on the other hand, will create a lot of individual entries in the file .classpath. Eclipse will handle them as if you manually added JARs to your project.
Unless you know how the classpath in Eclipse works, this approach is not recommended.
I was facing the same issue,I followed the bellow steps.
Window => Preferences => Java => Installed JREs,
You see in the above screen Jre1.8.0_12 is selected.
select the JRE you are using and click Edit. Now You should see the bellow screen.
Click on the directory, browse for Jdk, It should look like bellow screen.
click ok, and its done
I had the problem that my Eclipse was not debugging the source code of my project. I was getting a blank page with "Source code node found".
Please click the Attach source code button. Then delete the "default" folder then click add and go to your project location and attach. This worked for me
Remove the existing Debug Configuration and create a new one. That should resolve the problem.
None of the mentioned answer worked for me.
To resolve this issue i have to follow bellow steps:
Right click on Java HotSpot(TM) 64 Bit server.
Select "Edit Source Lookup".
Click on "Add".
Select "File System Directory" instead of Java project.
Select Root directory of your project.
Check "Search Subfolders".
Click Ok ok ok.
Thanks.
Click -> Edit Source Lookup Path
after then
Click -> Add finally select Java project and select project path.
Source: https://www.youtube.com/watch?v=IGIKPY6q1Qw
In my case, even after Editing source lookup and Adding project, it didn't worked. I configured the Build path of the project.
After that, I selected JRE System Library and it worked.
Evidently, Eclipse does not automatically know where the source code for the dependent jars are. It is not clear why debugger could not inspect variables once the source was attached. One possibility is incorrect/incompatible source.
Assuming you have a maven project and the sources of the dependencies are downloaded and available in the local repository, you may want to install m2eclipse, the maven eclipse plugin and see if that helps in addressing your issue.
You might have source code of a dependency accessible to Eclipse. But Eclipse does not know for source code for code that is dynamically loaded. E.g. through Maven.
In case of Maven, I recommend that you use run-jetty-run plugin:
http://code.google.com/p/run-jetty-run/
As a workaround you can also connect to a running JVM with the debugger and you will see the code.
Alternatively you can use Dynamic Source Lookup plugin for Eclipse from here:
https://github.com/ifedorenko/com.ifedorenko.m2e.sourcelookup
Unfortunately it didn't helped me as it has issues with Windows paths with spaces.
I have filled an enhancement request on Eclipse Bugzilla and if you agree this issue "Source not found" should vanish forever, please vote for it here:
https://bugs.eclipse.org/bugs/show_bug.cgi?id=384065
Thanks!
Sasa
In my case in "Attach Source", I added the other maven project directory in the "Source Attachment Configuration" panel. Adding the latest version jar from the m2 repository din't work. All the classes from the other maven project failed to open.
Here test was my other maven project containing all the java sources.
I had the very same problem. In my case, I've disabled Window-Preferences-Java-Debug [Suspend execution on uncaught exceptions]. Then, the console showed me the correct error: my MySql user hadn't privileges to access the database. According to this topic.
Info: This is a possible solution, when you use maven (pom.xml) with couple of projects.
If you are working with maven, make sure what version you are taking inside the according pom.xml (e. g. 1.0.1-SNAPSHOT ).
It might be possible that your code is up-to-date, but your pom.xml dependencies are still taking the old JAR's/Snapshots (with the old code).
Finding the problem:
Try to debug the according file.
Therefore, set a breakpoint in the relevant code area.
When "source not found" appears, make sure to bind in the right project (where the .java file can be found).
The compile .class file opens up in the IDE editor.
Click "Link with Editor" to find the according JAR/Snapshot.
Now make sure that this JAR is the most recent one. Possibly there is a newer one. In that case, write the most recent version number in the pom.xml.
Then do a maven update and build (e. g. "mvn clean install -U") in the right project directory.
If you are on eclipse or STS please install and Use GC(GrepCode Plugin) ,some time you don't need to attach the source .zip file into your project path so GrepCode works fine for you.
I've had a related issue in connection with Glassfish server debugging in Eclipse.
This was brought about by loading the source code from a different repository (changing from SVN to GitHub). In the process, the wrong compiled classes were used by the Glassfish server and hence, the source and run time would be out of sync with break points appearing on empty lines.
To solve this, rename or delete the top folder of the classes directory and Glassfish will recreate the whole class directory tree including updating the class files with the correctly compiled version.
The classes directory is located in: /workspace/glassfish3122eclipsedefaultdomain/eclipseApps/< your Web Application>/WEB-INF/classes
In my case with tomcat projects I have checked project here:
Window - Preferences - Tomcat - Source Path - Add java projects to source path
In my case the Maven version of the other referenced project didn't match the version of the test project. Once they were the same, the problem disappeared.
When running in debug mode, click Edit Source Lookup after suspended from thread. At this point, we should be able to add the necessary project/jar which contains your source code.
After I added my current project in this way, and it solved my problem. Thanks
If you want to attach source code to any JAR by auto-downloading, try using this Eclipse plugin Java Source Attacher
I had this problem while working on java code to do process on a excel file containing a data set, then convert it to .csv file, i tried answers to this post, but they did not work.
the problem was the jar files themselves. after downloading needed jar files one by one(older releases) and add them to my project, "source not found" error vanished.
maybe you can check your jar files.
hope this would help.
this worked for me
right click on project -> Properties -> Deployment Assembly -> add your jar
Go to Debug configuration in eclipse and use below goal to run your application.
-Dmaven.surefire.debug
e.g
-Dmaven.surefire.debug exec:java
Well, here's what worked for me. I tried every possible solution on StackOverflow that there was. I tried changing my source location in the debug menu, I installed the m2e Eclipse plugin, I changed from embedded Maven, and I installed the run-jetty-run and nothing worked. Now, I will caveat that I was not trying to view an external person's source code, I just wanted to see my OWN code, but every time I "stepped in" to my methods that I wrote that were in MY project, I got the "Source now found" error.
After finally asking an expert, my issue was that the first thing Eclipse was doing was calling a ClassLoader, which you can see from the debug stack. All I had to do was F6 (step over) and then it took me back to my original call and then F5 (step in). And there was my code. Sigh...such a simple fix but an hour wasted.
For beginners,
There is a possibility that the jar file is a part of the project which you have not yet included in the Eclipse workspace.
For that, you need to know the project name of the jar file.
Say for example, its abc-18.0.0-SNAPSHOT.jar, it means that the project you are supposed to include in your workspace is abc.
I had the same issue with eclipse 2019-03 (4.11.0) and I was only able to solve this by doing the debugging via remote debugging instead of directly launching it in debug mode.
Attach source -> Add -> External Archive -> select the jar -> open -> done
the catch is look for the sources jar and attach this jar.
for example the jar ends with "-sources" Stax2-api-3.4.1-sources
sometimes these thing happens because of the version also like if you are using latest
version in that case it may arise try to use older version it will work.
Today, I ran into a java source file that had a typo in the 'package' statement at the top. The name of the package did not match the name of the directory the file was sitting in (one extra 's' at the end).
To my surprise, javac from 1.6, checkstyle, and pmd all passed the file as OK. The only tool that got around to complaining was javadoc, and only because it was the only file in the package, and a package with no classes in it is a fatal error to javadoc.
Is there some option to javac, or some other command-line tool (preferably with a maven plugin maven) that will squeal about this sort of goof?
I tested this with the latest version of Eclipse and it complains. Eclipse has Maven support.
Well, this seems like an interesting "feature". I fight with such errors regularly once a year. I would guess that PMD, FindBugs or a tool like that will find these errors. However if you say they do not, I can think of only three other options at the moment:
Use Eclipse compiler from Maven (to compile the sources and see the error). This should be possible although I have never tried it so far.
Create a custom PMD rule that will check the Java package name and compare it with the directory name.
Create your own Maven plug-in that will check it. This may not be very easy if you have not develop a Maven plug-in so far.
These are just ideas and should be treated as such.
I'm trying to run my junit test (to verify that a properties file loads correctly) but
I get ClassNotFoundException although the class is there and all required libraries are there too.
Here it is the error I get :
Class not found ConfigurationManagerTest java.lang.ClassNotFoundException: ConfigurationManagerTest
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.loadClass(RemoteTestRunner.java:693)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.loadClasses(RemoteTestRunner.java:429)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:452)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:683)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:390)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:197)
any ideas on how to fix this ?
Thanks.
ConfigurationManagerTest is not being found on your classpath. Ensure that the ConfigurationManagerTest.class file is available on your classpath.
It might not exist if it wasn't successfully compiled or if it's being created in a directory that you haven't told the Eclipse project should be on the classpath.
Assuming that you've put your test classes in a separate folder, make sure that it shows up in the "Package Explorer" view (rather than the "Navigator" view).
Under the project properties, "Java Build Path" and the "Source" tab, you can also see if the source folder is included for building as well as where the .class files are generated.
There is one more possibility. I had the same problem just now and no one of the solutions here helped. Except removing and recreating of the project - I didn't want to try it. What did help, was to clean the project two times immediately one after another! Clean + build could be repeated any number of times - it won't help. Only clean+clean and after that build goes OK. (Eclipse 3.6). Of course, you should disable autobuild for that.
Edit: This post has got its last plus on 15.11.2017. So, the problem (and the solution) remains actual.
Another possible problem is a missing builder (it will prevent from your .class file from being built).
Check that your .project file has the following lines
<buildSpec>
<buildCommand>
<name>org.eclipse.jdt.core.javabuilder</name>
<arguments>
</arguments>
</buildCommand>
</buildSpec>
<natures>
<nature>org.eclipse.jdt.core.javanature</nature>
</natures>
This happened to me when I was dragging and dropping test classes to different packages. I just did the following
Saved the class in a text editor.
Deleted the offending class from eclipse project explorer.
Re-created the class.
Bingo! I can now run the test!
I had this problem and it was kind of tricky to realise what was wrong. The project had a dependency project with some error, which stopped the build from execute. When I remove this dependency problem, the project was built as expected.
Ps.: I am working on a project that has many compilation errors, because we are porting an application that was converted from Delphi to Java, so I didn't care to the compilation error at the beginning, that's why it took me some time to find out the problem.
check properties->java build path -> libraries. there should be no errors, in my case there was errors in the maven. once I put the required jar in the maven repo, it worked fine
I tried all the answers described here but none worked, but found this thread where slomek solves the problem in a very easy manner. Just go to project -> properties --> java build path. Then move Junit to the top by hitting the up bottom to the right. Then everything compiles just fine.
I tried everything mentioned here and in other posts. Some of the solutions that people proffered were:
Change the output folder for the test
Create a custom builder for the project that would run test-compile from Maven
Move the Maven dependencies higher in the Order and Export list in the project build path
There were many, many more but the one that I found to work was as follows: Close the development environment. Delete the jars used by the project from my local Maven repository. Open the IDE. Build the project. Run the test.
After hours of beating my head against my keyboard and following suggested solutions, this one worked!
what worked for me is to remove the runconfiguration of the test. Then right click the testclass and click run as junit test.
now it recreates a correct run config for me.
Another way that this can unfold, and just did for me, is if you have a build error that Eclipse doesn't tell you about. If compiling the unit test fails then there is no .class file and you will get the ClassNotFoundException.
In my case there was a missing 3rd party jar file. When I ran the test I got a pop-up window that said "Errors exist in required project(s)". I work with a huge project and I always get that message because some of the source is not available to eclipse (long story). Also it doesn't say what the errors are. So I click "Continue" and then I get the exception.
Once I realized what was going on it was easy to fix by adding the missing jar to the classpath under Run -> Debug Configurations...
I'm not sure how to best detect or prevent this from happening except to be aware of this possibility when something goes wrong and to review your most recent changes for what might have gone wrong.
I also faced similar issue as mention in comment below.
**org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.loadClass(RemoteTestRunner.java:766)**
Check all mention possibility above but still could not find root cause why test case not getting execute.
Then I found that there is one package issue in my class. So due to that I was getting compilation error in my Test class.
Reason is quite simple, Due to compilation error class did not compile and could not create class file.
I fixed that compilation error and executed that Test class and its run successfully.
Are you sure your test class is in the build folder? You're invoking junit in a separate JVM (fork=true) so it's possible that working folder would change during that invocation and with build being relative, that may cause a problem.
Run ant from command line (not from Eclipse) with -verbose or -debug switch to see the detailed classpath / working dir junit is being invoked with and post the results back here if you're still can't resolve this issue.
A variation on Guy's answer above, involving additional builders. Say you have an Ant builder configured:
<buildSpec>
<buildCommand>
<name>org.eclipse.jdt.core.javabuilder</name>
<arguments>
</arguments>
</buildCommand>
<buildCommand>
<name>org.eclipse.ui.externaltools.ExternalToolBuilder</name>
<arguments>
<dictionary>
<key>LaunchConfigHandle</key>
<value><project>/.externalToolBuilders/myprojectantlaunch.launch</value>
</dictionary>
</arguments>
</buildCommand>
</buildSpec>
If the Ant build and Eclipse build have differing output locations, Eclipse may not be able to locate the test class on the classpath. In the case of an Ant builder, also check the configured targets for clean, auto, manual and after-clean builds, to ensure that the target which builds the unit tests is called.
I add this answer as my solution review from the above.
You simply edit the file .project in the main project folder. Use a proper XML Editor otherwise you will get a fatal error from Eclipse that stats you can not open this project.
I made my project nature Javaby adding this <nature>org.eclipse.jdt.core.javanature</nature> to <natures></natures>.
I then added those lines correctly indented <buildCommand><name>org.eclipse.jdt.core.javabuilder</name><arguments></arguments></buildCommand> to <buildSpec></buildSpec>.
Run as JUnit ... Success
Right click the project in the Explorer: Build Path -> Order and Export -> Select JRE System Library [jdk] and click Bottom button.
Yet another variation.
Somehow, my formerly working test classes appeared to be running from some other location; my edits would not execute when I ran the tests.
I found that the output folder for my ${project_loc}src/test/java files was not what I expected. It had inadvertently been set to ${project_loc}target/classes.
I set it properly in project properties, Java Build Path, Source tab.
If you have a maven project try to run:
mvn clean compile
and then in eclipse clean & build your project.
I had the similar problem with my Eclipse Helios which debugging Junits. My problem was little different as i was able to run Junits successfully but when i was getting ClassNotFoundException while debugging the same JUNITs.
I have tried all sort of different solutions available in Stackoverflow.com and forums elsewhere, but nothing seem to work. After banging my head with these issue for close to two days, finally i figured out the solution to it.
If none of the solutions seem to work, just delete the .metadata folder created in your workspace. This would create an additional overhead of importing the projects and all sorts of configuration you have done, but these will surely solve these issue.
Hope these helps.
In "Package Explorer" view, Right click your test class, then "Build Path">>"Include", it should be OK.
I too faced the same exception, none of the solutions over internet helped me out.
my project contains multiple modules. My Junit code resides in Web module. And it's referring to client module's code.
Finally , I tried :
Right click on (Web module) project -->build path--> source tab--> Link source --> added the src files location (Client module's)
Thats it! It worked like a charm
Hope it helps
I received this error because I had recently created a new workspace and my "Installed JREs" were not set up correctly. Make sure in Preferences -> Java -> Installed JREs
the root folder of your JDK is selected. The default for me in a new workspace was a JRE for some reason.
I know this has been already answered a long time ago but the answer didnt fix it for me but, I just removed everything from the sources in the buildpath settings and re-added them
I had this problem, in my case the problem relies in the compilation, I am using maven and test classes didn't compile.
I fixed it by doing a maven install (it compiles all the files), also you can check for other reasons, that avoid test to compile like if your "run configurations" is skipping the tests to save time.
Assumming you tried everything reasonable (delete target, refresh, clean, rebuild, maven install...) and that you realized that Eclipse does not behave reasonable...
Now: Check if there is no errors suggesting it can be a plugin (any plugin) that has something to do with tests.
In my case:
I removed EclEmma.
It started working...
Spent few hours on trying to guess it!.
Please make sure the output folder in Java Build Path tab set as like below,which would determine where the .class file are generated.Then clean the project.
The above mentioned solutions didn't work for me.
I just restarted my IDE by closing it and reopening it.
And then error disappeared and its working fine now.
You may need to do a combination of the above to resolve this problem. I normally get this error when I do
mvn clean install
and see a compile error preventing the my tests from fully compiling.
Assuming the issues resolved by the above have been dealt with, try clicking Project, Clean, and clean the project which contains the test you want to run. Also make sure Build Automatically is checked.