Develop Reference

Java output explanation [duplicate]

Consider the int a variables in these classes:
class Foo {
public int a = 3;
public void addFive() { a += 5; System.out.print("f "); }
}
class Bar extends Foo {
public int a = 8;
public void addFive() { this.a += 5; System.out.print("b " ); }
}
public class test {
public static void main(String [] args){
Foo f = new Bar();
f.addFive();
System.out.println(f.a);
}
}
I understand that the method addFive() have been overridden in the child class, and in class test when the base class reference referring to child class is used to call the overridden method, the child class version of addFive is called.
But what about the public instance variable a? What happens when both base class and derived class have the same variable?
The output of the above program is
b 3
How does this happen?

There are actually two distinct public instance variables called a.
A Foo object has a Foo.a variable.
A Bar object has both Foo.a and Bar.a variables.
When you run this:
Foo f = new Bar();
f.addFive();
System.out.println(f.a);
the addFive method is updating the Bar.a variable, and then reading the Foo.a variable. To read the Bar.a variable, you would need to do this:
System.out.println(((Bar) f).a);
The technical term for what is happening here is "hiding". Refer to the JLS section 8.3, and section 8.3.3.2 for an example.
Note that hiding also applies to static methods with the same signature.
However instance methods with the same signature are "overridden" not "hidden", and you cannot access the version of a method that is overridden from the outside. (Within the class that overrides a method, the overridden method can be called using super. However, that's the only situation where this is allowed. The reason that accessing overridden methods is generally forbidden is that it would break data abstraction.)
The recommended way to avoid the confusion of (accidental) hiding is to declare your instance variables as private and access them via getter and setter methods. There are lots of other good reasons for using getters and setters too.
It should also be noted that: 1) Exposing public variables (like a) is generally a bad idea, because it leads to weak abstraction, unwanted coupling, and other problems. 2) Intentionally declaring a 2nd public a variable in the child class is a truly awful idea.

From JLS
8.3.3.2 Example: Hiding of Instance Variables This example is similar to
that in the previous section, but uses
instance variables rather than static
variables. The code:
class Point {
int x = 2;
}
class Test extends Point {
double x = 4.7;
void printBoth() {
System.out.println(x + " " + super.x);
}
public static void main(String[] args) {
Test sample = new Test();
sample.printBoth();
System.out.println(sample.x + " " +
((Point)sample).x);
}
}
produces the output:
4.7 2
4.7 2
because the declaration of x in class
Test hides the definition of x in
class Point, so class Test does not
inherit the field x from its
superclass Point. It must be noted,
however, that while the field x of
class Point is not inherited by class
Test, it is nevertheless implemented
by instances of class Test. In other
words, every instance of class Test
contains two fields, one of type int
and one of type double. Both fields
bear the name x, but within the
declaration of class Test, the simple
name x always refers to the field
declared within class Test. Code in
instance methods of class Test may
refer to the instance variable x of
class Point as super.x.
Code that uses a field access
expression to access field x will
access the field named x in the class
indicated by the type of reference
expression. Thus, the expression
sample.x accesses a double value, the
instance variable declared in class
Test, because the type of the variable
sample is Test, but the expression
((Point)sample).x accesses an int
value, the instance variable declared
in class Point, because of the cast to
type Point.

In inheritance, a Base class object can refer to an instance of Derived class.
So this is how Foo f = new Bar(); works okay.
Now when f.addFive(); statement gets invoked it actually calls the 'addFive() method of the Derived class instance using the reference variable of the Base class. So ultimately the method of 'Bar' class gets invoked. But as you see the addFive() method of 'Bar' class just prints 'b ' and not the value of 'a'.
The next statement i.e. System.out.println(f.a) is the one that actually prints the value of a which ultimately gets appended to the previous output and so you see the final output as 'b 3'. Here the value of a used is that of 'Foo' class.
Hope this trick execution & coding is clear and you understood how you got the output as 'b 3'.

Here F is of type Foo and f variable is holding Bar object but java runtime gets the f.a from the class Foo.This is because in Java variable names are resolved using the reference type and not the object which it is referring.

Objects With Multiple Fields of the Same Name [duplicate]

I am studying overriding member functions in Java and thought about experimenting with overriding member variables.
So, I defined classes
public class A{
public int intVal = 1;
public void identifyClass()
{
System.out.println("I am class A");
}
}
public class B extends A
{
public int intVal = 2;
public void identifyClass()
{
System.out.println("I am class B");
}
}
public class mainClass
{
public static void main(String [] args)
{
A a = new A();
B b = new B();
A aRef;
aRef = a;
System.out.println(aRef.intVal);
aRef.identifyClass();
aRef = b;
System.out.println(aRef.intVal);
aRef.identifyClass();
}
}
The output is:
1
I am class A
1
I am class B
I am not able to understand why when aRef is set to b intVal is still of class A?

When you make a variable of the same name in a subclass, that's called hiding. The resulting subclass will now have both properties. You can access the one from the superclass with super.var or ((SuperClass)this).var. The variables don't even have to be of the same type; they are just two variables sharing a name, much like two overloaded methods.

Variables are not polymorphic in Java; they do not override one another.

There is no polymorphism for fields in Java.
Variables decision happens at a compile time so always Base Class variables (not child’s inherited variables) will be accessed.
So whenever upcasting happens always remember
1) Base Class variables will be accessed.
2) Sub Class methods(overridden methods if overriding happened else inherited methods as it is from parent) will be called.

Variables are resolved compile-time, methods run-time. The aRef is of type A, therefore aRef.Intvalue is compile-time resolved to 1.

OverRiding Concept in Java
Functions will override depends on object type and variables will accessed on reference type.
Override Function: In this case suppose a parent and child class both have same name of function with own definition. But which function will execute it depends on object type not on reference type on run time.
For e.g.:
Parent parent=new Child();
parent.behaviour();
Here parent is a reference of Parent class but holds an object of Child Class so that's why Child class function will be called in that case.
Child child=new Child();
child.behaviour();
Here child holds an object of Child Class, so the Child class function will be called.
Parent parent=new Parent();
parent.behaviour();
Here parent holds the object of Parent Class, so the Parent class function will be called.
Override Variable: Java supports overloaded variables. But actually these are two different variables with same name, one in the parent class and one in the child class. And both variables can be either of the same datatype or different.
When you trying to access the variable, it depends on the reference type object, not the object type.
For e.g.:
Parent parent=new Child();
System.out.println(parent.state);
The reference type is Parent so the Parent class variable is accessed, not the Child class variable.
Child child=new Child();
System.out.println(child.state);
Here the reference type is Child, so the Child class variable is accessed not the Parent class variable.
Parent parent=new Parent();
System.out.println(parent.state);
Here the reference type is Parent, so Parent class variable is accessed.

From JLS Java SE 7 Edition §15.11.1:
This lack of dynamic lookup for field accesses allows programs to be run efficiently with straightforward implementations. The power of late binding and overriding is available, but only when instance methods are used.
Answers from Oliver Charlesworth and Marko Topolnik are correct, I would like to elaborate a little bit more on the why part of the question:
In Java class members are accessed according the type of the reference and not the type of the actual object. For the same reason, if you had a someOtherMethodInB() in class B, you wouldn't be able to access it from aRef after aRef = b is run. Identifiers (ie class, variable, etc names) are resolved at compile time and thus the compiler relies on the reference type to do this.
Now in your example, when running System.out.println(aRef.intVal); it prints the value of intVal defined in A because this is the type of the reference you use to access it. The compiler sees that aRef is of type A and that's the intVal it will access. Don't forget that you have both fields in the instances of B. JLS also has an example similar to yours, "15.11.1-1. Static Binding for Field Access" if you want to take a look.
But why do methods behave differently? The answer is that for methods, Java uses late binding. That means that at compile time, it finds the most suitable method to search for during the runtime. The search involves the case of the method being overridden in some class.

I hope this can help:
public class B extends A {
// public int intVal = 2;
public B() {
super();
super.intVal = 2;
}
public void identifyClass() {
System.out.println("I am class B");
}
}
So overriding variable of base class is not possible, but base class variable value can be set (changed) from constructor of inherited class.

This is called variable hiding. When you assign aRef = b; , aRef has two intVal, 1 is named just intVal another is hidden under A.intVal (see debugger screenshot), Because your variable is of type class A , even when you print just intVal java intelligently picks up A.intVal.
Answer 1: One way of accessing child class's intVal is System.out.println((B)aRef.intVal);
Answer 2: Another way of doing it is Java Reflection because when you use reflection java cant intelligently pickup hidden A.intVal based on Class type, it has to pick up the variable name given as string -
import java.lang.reflect.Field;
class A{
public int intVal = 1;
public void identifyClass()
{
System.out.println("I am class A");
}
}
class B extends A
{
public int intVal = 2;
public void identifyClass()
{
System.out.println("I am class B");
}
}
public class Main
{
public static void main(String [] args) throws Exception
{
A a = new A();
B b = new B();
A aRef;
aRef = a;
System.out.println(aRef.intVal);
aRef.identifyClass();
aRef = b;
Field xField = aRef.getClass().getField("intVal");
System.out.println(xField.get(aRef));
aRef.identifyClass();
}
}
Output -
1
I am class A
2
I am class B

Well, I hope u got the answer. If not, you can try seeing in the debug mode. the subclass B has access to both the intVal. They are not polymorphic hence they are not overriden.
If you use B's reference you will get B's intVal. If you use A's reference , you will get A's intVal. It's that simple.

As per the Java specifications, the instance variables are not overridden from a super class by a sub class when it is extended.
Hence the variable in the sub class only can be seen as one sharing the same name.
Also when the constructor of A is called during the instance creation of B the variable (intVal) is initialized and hence the output.

It is because when you assign b to aRef, it is resolved, leading aRef to just be of class A. This means that aRef does not have access to any of class B's fields or methods. If you call for intVal instead by using b.intVal, you will get 2.

Java has a feather of encapsulation means it tightly binds the property and the behavior of an object. so only via a class reference we can call it's behavior to change it's property.
and in inheritance only method overrides so that it can affects only it's property.

As Many users have already pointed out, this is not polymorphism. Polymorphism only applies to methods(functions).
Now as to why the value of the intVal of class A is printed, this happens because as you can see the reference aRef is of type A.
I can see why you are confused by it. By the same procedure you have accessed the overridden methods for ex. the method identifyClass() but the not the variables which directly proves the first line that I have written .
Now in order to access the variable you can do ((Superclass)c).var
Note here that the Superclass can be many levels up for example
A<-B<-C. That is C extends B and B extends A. If you wanted the value of var of A then you could have done ((A)c).var .
EDIT: as one of the users have pointed out this 'trick' does not apply to static methods, because they are static.

Why is the field not overridden? [duplicate]

I am studying overriding member functions in Java and thought about experimenting with overriding member variables.
So, I defined classes
public class A{
public int intVal = 1;
public void identifyClass()
{
System.out.println("I am class A");
}
}
public class B extends A
{
public int intVal = 2;
public void identifyClass()
{
System.out.println("I am class B");
}
}
public class mainClass
{
public static void main(String [] args)
{
A a = new A();
B b = new B();
A aRef;
aRef = a;
System.out.println(aRef.intVal);
aRef.identifyClass();
aRef = b;
System.out.println(aRef.intVal);
aRef.identifyClass();
}
}
The output is:
1
I am class A
1
I am class B
I am not able to understand why when aRef is set to b intVal is still of class A?

When you make a variable of the same name in a subclass, that's called hiding. The resulting subclass will now have both properties. You can access the one from the superclass with super.var or ((SuperClass)this).var. The variables don't even have to be of the same type; they are just two variables sharing a name, much like two overloaded methods.

Variables are not polymorphic in Java; they do not override one another.

There is no polymorphism for fields in Java.
Variables decision happens at a compile time so always Base Class variables (not child’s inherited variables) will be accessed.
So whenever upcasting happens always remember
1) Base Class variables will be accessed.
2) Sub Class methods(overridden methods if overriding happened else inherited methods as it is from parent) will be called.

Variables are resolved compile-time, methods run-time. The aRef is of type A, therefore aRef.Intvalue is compile-time resolved to 1.

OverRiding Concept in Java
Functions will override depends on object type and variables will accessed on reference type.
Override Function: In this case suppose a parent and child class both have same name of function with own definition. But which function will execute it depends on object type not on reference type on run time.
For e.g.:
Parent parent=new Child();
parent.behaviour();
Here parent is a reference of Parent class but holds an object of Child Class so that's why Child class function will be called in that case.
Child child=new Child();
child.behaviour();
Here child holds an object of Child Class, so the Child class function will be called.
Parent parent=new Parent();
parent.behaviour();
Here parent holds the object of Parent Class, so the Parent class function will be called.
Override Variable: Java supports overloaded variables. But actually these are two different variables with same name, one in the parent class and one in the child class. And both variables can be either of the same datatype or different.
When you trying to access the variable, it depends on the reference type object, not the object type.
For e.g.:
Parent parent=new Child();
System.out.println(parent.state);
The reference type is Parent so the Parent class variable is accessed, not the Child class variable.
Child child=new Child();
System.out.println(child.state);
Here the reference type is Child, so the Child class variable is accessed not the Parent class variable.
Parent parent=new Parent();
System.out.println(parent.state);
Here the reference type is Parent, so Parent class variable is accessed.

From JLS Java SE 7 Edition §15.11.1:
This lack of dynamic lookup for field accesses allows programs to be run efficiently with straightforward implementations. The power of late binding and overriding is available, but only when instance methods are used.
Answers from Oliver Charlesworth and Marko Topolnik are correct, I would like to elaborate a little bit more on the why part of the question:
In Java class members are accessed according the type of the reference and not the type of the actual object. For the same reason, if you had a someOtherMethodInB() in class B, you wouldn't be able to access it from aRef after aRef = b is run. Identifiers (ie class, variable, etc names) are resolved at compile time and thus the compiler relies on the reference type to do this.
Now in your example, when running System.out.println(aRef.intVal); it prints the value of intVal defined in A because this is the type of the reference you use to access it. The compiler sees that aRef is of type A and that's the intVal it will access. Don't forget that you have both fields in the instances of B. JLS also has an example similar to yours, "15.11.1-1. Static Binding for Field Access" if you want to take a look.
But why do methods behave differently? The answer is that for methods, Java uses late binding. That means that at compile time, it finds the most suitable method to search for during the runtime. The search involves the case of the method being overridden in some class.

I hope this can help:
public class B extends A {
// public int intVal = 2;
public B() {
super();
super.intVal = 2;
}
public void identifyClass() {
System.out.println("I am class B");
}
}
So overriding variable of base class is not possible, but base class variable value can be set (changed) from constructor of inherited class.

This is called variable hiding. When you assign aRef = b; , aRef has two intVal, 1 is named just intVal another is hidden under A.intVal (see debugger screenshot), Because your variable is of type class A , even when you print just intVal java intelligently picks up A.intVal.
Answer 1: One way of accessing child class's intVal is System.out.println((B)aRef.intVal);
Answer 2: Another way of doing it is Java Reflection because when you use reflection java cant intelligently pickup hidden A.intVal based on Class type, it has to pick up the variable name given as string -
import java.lang.reflect.Field;
class A{
public int intVal = 1;
public void identifyClass()
{
System.out.println("I am class A");
}
}
class B extends A
{
public int intVal = 2;
public void identifyClass()
{
System.out.println("I am class B");
}
}
public class Main
{
public static void main(String [] args) throws Exception
{
A a = new A();
B b = new B();
A aRef;
aRef = a;
System.out.println(aRef.intVal);
aRef.identifyClass();
aRef = b;
Field xField = aRef.getClass().getField("intVal");
System.out.println(xField.get(aRef));
aRef.identifyClass();
}
}
Output -
1
I am class A
2
I am class B

Well, I hope u got the answer. If not, you can try seeing in the debug mode. the subclass B has access to both the intVal. They are not polymorphic hence they are not overriden.
If you use B's reference you will get B's intVal. If you use A's reference , you will get A's intVal. It's that simple.

As per the Java specifications, the instance variables are not overridden from a super class by a sub class when it is extended.
Hence the variable in the sub class only can be seen as one sharing the same name.
Also when the constructor of A is called during the instance creation of B the variable (intVal) is initialized and hence the output.

It is because when you assign b to aRef, it is resolved, leading aRef to just be of class A. This means that aRef does not have access to any of class B's fields or methods. If you call for intVal instead by using b.intVal, you will get 2.

Java has a feather of encapsulation means it tightly binds the property and the behavior of an object. so only via a class reference we can call it's behavior to change it's property.
and in inheritance only method overrides so that it can affects only it's property.

As Many users have already pointed out, this is not polymorphism. Polymorphism only applies to methods(functions).
Now as to why the value of the intVal of class A is printed, this happens because as you can see the reference aRef is of type A.
I can see why you are confused by it. By the same procedure you have accessed the overridden methods for ex. the method identifyClass() but the not the variables which directly proves the first line that I have written .
Now in order to access the variable you can do ((Superclass)c).var
Note here that the Superclass can be many levels up for example
A<-B<-C. That is C extends B and B extends A. If you wanted the value of var of A then you could have done ((A)c).var .
EDIT: as one of the users have pointed out this 'trick' does not apply to static methods, because they are static.

Why can't I refer enclosing class's non-static var from its inner class's non-static method?

In my awareness, non-static method will be assigned "this" variables for its class obj & all enclosing classes.
public class TestNested {
int a=4;
public static class a{
int a=5;
static int c=10;
class b{
int a=6;
void aaa(){
int a=7;
TestNested t=new TestNested();
System.out.println(this.a);
System.out.println(b.this.a);
System.out.println(TestNested.a.b.this.a);
System.out.println(TestNested.a.this.a);
System.out.println(a.this.a);
System.out.println(t.a);
System.out.println(TestNested.this.a);
}
}
}
void r(){
TestNested t=new TestNested();
TestNested.a a=new TestNested.a();
a.b b=a.new b();
b.aaa();
}
public static void main(String[] args) {
TestNested t=new TestNested();
t.r();
}
}
in this case the final statement of void aaa() is System.out.println(TestNested.this.a); will be sentenced to cause compilation error with the reason :'com.xxx.TestNested.this' cannot be referenced from static context, that's really confusing me because the this var that points to TestNested should be the non-static hidden var of the method itself,then why it can't use its own var?
Or if my awareness is wrong that each that var is assigned in each class enclosed from the method's class, but the void aaa() isn't a static method which means it can reference non-static var rite? or even the method isn't static, but if one of its enclosing class is static, it'll be automatically recognized as static member?

This is because your nested class a is not an inner class of TestNested. It is a static nested class, meaning that it is not linked to a particular instance of TestNested.
Note: an inner class is a non-static nested class.
What instance of TestNested would you expect your expression TestNested.this to refer to?
You can see, by the way, that you're not referring to your variable t here:
TestNested.a a=new TestNested.a();
Which points out that the object a is not linked to t at all.
In my above answer, I assumed it was clear to you what you were doing with this. It appears it is not the case, according to your comments, so I'm going to try and clarify it here.
First of all, this always refers to an object: an instance of a class.
Let's assume we're in the context of a non-static method in the class b. Because the method is non-static, the code will be executed relatively to a particular instance of b. I take the shortcut to refer to this particular instance as "the instance of b you're in".
Since b is an inner class of a, no instance of b can exist outside an instance of a. This means the instance of b you're in is enclosed in an instance of a. I take the shortcut to refer to this particular instance as "the instance of a you're in" (Technically, you're in a b which is in an a).
So, in this context of a non-static method of b:
this refers to the instance of the b you're in. It is the standard use of this keyword.
b.this, a.b.this or TestNested.a.b.this are the same as this here, the difference is only that you qualify more precisely the class b.
a.this or TestNested.a.this both refer to the instance of a you're in (TestNested.a is just a more precise qualification for a). This a object exists because b is an inner class of a, which means that every instance of b is linked to an instance of a. This is the only way to refer to the instance of a.
TestNested.this would refer to the instance of TestNested you're in. But you're not in any instance of TestNested, so it does not mean anything, hence the compile error. You're in an instance of b, which is within an instance of a (because b is an inner class of a). The instance of a exists by itself because a is a static nested class of TestNested, so it is not linked to an instance of TestNested.

TestNested.a <-- references a static variable of a static class
this.a <-- references an instance variable of an object
TestNested.this <-- tries to reference an object from a static context, but "this" does not exist in a static context.
You can reference static content from non-static, but not vice-versa.

Are static class members static in Java?

In the below code, are b and show inherently static?
public class A {
public static class B {
private int b = 0;
public void show() {
System.out.println(b);
}
}
}

No they aren't static. You need to create an instance of B to access them.

The static keyword in your code example means that instances of B can be created without an instance of A.
If B was not static:
Instances would have an implicit reference to an instance of A.
The only way to create them would be to use new B() inside class A, or using syntax like new A().new B().
Methods in B can refer to A.this (the implicit reference to an instance of A).
Methods in B can refer to A.this.someField (using that implicit reference).
Methods in B can call instance (non-static) methods in A.
However, because B is static:
Instances do not have a reference to an instance of A - you don't need an A to create a B.
Instances can be created using new A.B() (or just new B() from within in class A)
Methods in B cannot refer to A.this.
Methods in B cannot access fields in A (unless passed in as a parameter).
Methods in B cannot call instance (non-static) methods in A.

They are not static. They are instance fields in B.
Meaning you need to have an instance of B to get/set them.
B is static in A but that does not make those fields of B static.
You can create many instances of B without any reference to A.
So B is static class in A but the same is not true for B's instance fields.

The static keyword has two meanings that are actually quite different and that can be confusing.
Static on a variable/method means that it exists at the class level, not the instance level. This means that you only have one copy of that variable/method no matter how many instances of the class you create.
Static on an inner class though just means that the class does not depend upon its outer class. In your example you can create a new B() without having an A. If you didn't have the static keyword on the class you could not create a new B() unless it was within an instance of A.

B is a static inner class of A.
Need to instantiate B.
A.B innerObject = new A.B();
innerObject.show();

The identifier static has a specific purpose here that many people don't immediately grasp. I'm going to take your code and change it a bit.
public class A {
private int a;
public A(int a) {
this.a = a;
}
public class B {
public void show() {
System.out.println(a);
}
}
}
Now, what's happening in class B? Because B is a non-static class, it has access to other non-static members in class A. Essentially, it states that every class A object has their own flavor of class B objects, even thought they are functionally the same. For us to get that same behavior if B was a static class:
public class A {
private int a;
public A(int a) {
this.a = a;
}
public int getA() { return a; }
public static class B {
public void show(A a) {
System.out.println(a.getA());
}
}
}
Here, this implies that the flavor of B objects doesn't change depending on which A object created it. The B class is static so that it cannot access non-static members of the A class object that created it and must access those members explicitly from whichever A object it wants to interact with.
In the previous implementation, a B object would seamlessly access fields and non-static methods of the A object that created it.
These are two different behaviors and often it's clear exactly which one fits your objective.